/*
 * <plat/asp.h> - TI81XX Audio Serial Port support
 * Based on <arch/arm/mach-davinci/include/mach/asp.h>
 */
#ifndef __ASM_ARCH_TI81XX_ASP_H
#define __ASM_ARCH_TI81XX_ASP_H

#include <mach/irqs.h>
#include <asm/hardware/edma.h>

/* Bases of ti816x register banks */
#define TI81XX_ASP0_BASE	0x48038000
#define TI81XX_ASP1_BASE	0x4803C000
#define TI81XX_ASP2_BASE	0x48050000

/* EDMA channels of ti81xx McASP0 */
#define	TI81XX_DMA_MCASP0_AXEVT	8
#define	TI81XX_DMA_MCASP0_AREVT	9

/* EDMA channels of ti81xx McASP1 */
#define	TI81XX_DMA_MCASP1_AXEVT	10
#define	TI81XX_DMA_MCASP1_AREVT	11

/* EDMA channels of ti81xx McASP2 */
#define	TI81XX_DMA_MCASP2_AXEVT	12
#define	TI81XX_DMA_MCASP2_AREVT	13

/* Interrupts */
#define TI81XX_ASP0_RX_INT	TI81XX_IRQ_MCASP0_RX
#define TI81XX_ASP0_TX_INT	TI81XX_IRQ_MCASP0_TX
#define TI81XX_ASP1_RX_INT	TI81XX_IRQ_MCASP1_RX
#define TI81XX_ASP1_TX_INT	TI81XX_IRQ_MCASP1_TX
#define TI81XX_ASP2_RX_INT	TI81XX_IRQ_MCASP2_RX
#define TI81XX_ASP2_TX_INT	TI81XX_IRQ_MCASP2_TX

struct snd_platform_data {
	u32 tx_dma_offset;
	u32 rx_dma_offset;
	enum dma_event_q asp_chan_q;	/* event queue number for ASP channel */
	enum dma_event_q ram_chan_q;	/* event queue number for RAM channel */
	unsigned int codec_fmt;
	/*
	 * Allowing this is more efficient and eliminates left and right swaps
	 * caused by underruns, but will swap the left and right channels
	 * when compared to previous behavior.
	 */
	unsigned enable_channel_combine:1;
	unsigned sram_size_playback;
	unsigned sram_size_capture;

	/*
	 * If McBSP peripheral gets the clock from an external pin,
	 * there are three chooses, that are MCBSP_CLKX, MCBSP_CLKR
	 * and MCBSP_CLKS.
	 * Depending on different hardware connections it is possible
	 * to use this setting to change the behaviour of McBSP
	 * driver. The dm365_clk_input_pin enum is available for dm365
	 */
	int clk_input_pin;

	/*
	 * This flag works when both clock and FS are outputs for the cpu
	 * and makes clock more accurate (FS is not symmetrical and the
	 * clock is very fast.
	 * The clock becoming faster is named
	 * i2s continuous serial clock (I2S_SCK) and it is an externally
	 * visible bit clock.
	 *
	 * first line : WordSelect
	 * second line : ContinuousSerialClock
	 * third line: SerialData
	 *
	 * SYMMETRICAL APPROACH:
	 *   _______________________          LEFT
	 * _|         RIGHT         |______________________|
	 *     _   _         _   _   _   _         _   _
	 *   _| |_| |_ x16 _| |_| |_| |_| |_ x16 _| |_| |_
	 *     _   _         _   _   _   _         _   _
	 *   _/ \_/ \_ ... _/ \_/ \_/ \_/ \_ ... _/ \_/ \_
	 *    \_/ \_/       \_/ \_/ \_/ \_/       \_/ \_/
	 *
	 * ACCURATE CLOCK APPROACH:
	 *   ______________          LEFT
	 * _|     RIGHT    |_______________________________|
	 *     _         _   _         _   _   _   _   _   _
	 *   _| |_ x16 _| |_| |_ x16 _| |_| |_| |_| |_| |_| |
	 *     _         _   _          _      dummy cycles
	 *   _/ \_ ... _/ \_/ \_  ... _/ \__________________
	 *    \_/       \_/ \_/        \_/
	 *
	 */
	bool i2s_accurate_sck;

	/* McASP specific fields */
	int tdm_slots;
	u8 op_mode;
	u8 num_serializer;
	u8 *serial_dir;
	u8 version;
	u8 txnumevt;
	u8 rxnumevt;
};

enum {
	MCASP_VERSION_1 = 0,	/* DM646x */
	MCASP_VERSION_2,	/* DA8xx/OMAPL1x */
};

#define INACTIVE_MODE	0
#define TX_MODE		1
#define RX_MODE		2

#define DAVINCI_MCASP_IIS_MODE	0 /* Driver code needs to change modified */
#define DAVINCI_MCASP_DIT_MODE	1

void ti81xx_register_mcasp(int id, struct snd_platform_data *pdata);

#endif /* __ASM_ARCH_TI81XX_ASP_H */