/*
 * SBC8641D Device Tree Source
 *
 * Copyright 2008 Wind River Systems Inc.
 *
 * Paul Gortmaker (see MAINTAINERS for contact information)
 *
 * Based largely on the mpc8641_hpcn.dts by Freescale Semiconductor Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

/dts-v1/;

/ {
	model = "SBC8641D";
	compatible = "wind,sbc8641";
	#address-cells = <1>;
	#size-cells = <1>;

	aliases {
		ethernet0 = &enet0;
		ethernet1 = &enet1;
		ethernet2 = &enet2;
		ethernet3 = &enet3;
		serial0 = &serial0;
		serial1 = &serial1;
		pci0 = &pci0;
		pci1 = &pci1;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		PowerPC,8641@0 {
			device_type = "cpu";
			reg = <0>;
			d-cache-line-size = <32>;
			i-cache-line-size = <32>;
			d-cache-size = <32768>;		// L1
			i-cache-size = <32768>;		// L1
			timebase-frequency = <0>;	// From uboot
			bus-frequency = <0>;		// From uboot
			clock-frequency = <0>;		// From uboot
		};
		PowerPC,8641@1 {
			device_type = "cpu";
			reg = <1>;
			d-cache-line-size = <32>;
			i-cache-line-size = <32>;
			d-cache-size = <32768>;
			i-cache-size = <32768>;
			timebase-frequency = <0>;	// From uboot
			bus-frequency = <0>;		// From uboot
			clock-frequency = <0>;		// From uboot
		};
	};

	memory {
		device_type = "memory";
		reg = <0x00000000 0x20000000>;	// 512M at 0x0
	};

	localbus@f8005000 {
		#address-cells = <2>;
		#size-cells = <1>;
		compatible = "fsl,mpc8641-localbus", "simple-bus";
		reg = <0xf8005000 0x1000>;
		interrupts = <19 2>;
		interrupt-parent = <&mpic>;

		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
			  1 0 0xf0000000 0x00010000	// 64KB EEPROM
			  2 0 0xf1000000 0x00100000	// EPLD (1MB)
			  3 0 0xe0000000 0x04000000	// 64MB LB SDRAM (CS3)
			  4 0 0xe4000000 0x04000000	// 64MB LB SDRAM (CS4)
			  6 0 0xf4000000 0x00100000	// LCD display (1MB)
			  7 0 0xe8000000 0x04000000>;	// 64MB OneNAND

		flash@0,0 {
			compatible = "cfi-flash";
			reg = <0 0 0x01000000>;
			bank-width = <2>;
			device-width = <2>;
			#address-cells = <1>;
			#size-cells = <1>;
			partition@0 {
				label = "dtb";
				reg = <0x00000000 0x00100000>;
				read-only;
			};
			partition@300000 {
				label = "kernel";
				reg = <0x00100000 0x00400000>;
				read-only;
			};
			partition@400000 {
				label = "fs";
				reg = <0x00500000 0x00a00000>;
			};
			partition@700000 {
				label = "firmware";
				reg = <0x00f00000 0x00100000>;
				read-only;
			};
		};

		epld@2,0 {
			compatible = "wrs,epld-localbus";
			#address-cells = <2>;
			#size-cells = <1>;
			reg = <2 0 0x100000>;
			ranges = <0 0 5 0 1	// User switches
				  1 0 5 1 1	// Board ID/Rev
				  3 0 5 3 1>;	// LEDs
		};
	};

	soc@f8000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		device_type = "soc";
		compatible = "simple-bus";
		ranges = <0x00000000 0xf8000000 0x00100000>;
		bus-frequency = <0>;

		mcm-law@0 {
			compatible = "fsl,mcm-law";
			reg = <0x0 0x1000>;
			fsl,num-laws = <10>;
		};

		mcm@1000 {
			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
			reg = <0x1000 0x1000>;
			interrupts = <17 2>;
			interrupt-parent = <&mpic>;
		};

		i2c@3000 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <0>;
			compatible = "fsl-i2c";
			reg = <0x3000 0x100>;
			interrupts = <43 2>;
			interrupt-parent = <&mpic>;
			dfsrr;
		};

		i2c@3100 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <1>;
			compatible = "fsl-i2c";
			reg = <0x3100 0x100>;
			interrupts = <43 2>;
			interrupt-parent = <&mpic>;
			dfsrr;
		};

		dma@21300 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
			reg = <0x21300 0x4>;
			ranges = <0x0 0x21100 0x200>;
			cell-index = <0>;
			dma-channel@0 {
				compatible = "fsl,mpc8641-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x0 0x80>;
				cell-index = <0>;
				interrupt-parent = <&mpic>;
				interrupts = <20 2>;
			};
			dma-channel@80 {
				compatible = "fsl,mpc8641-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x80 0x80>;
				cell-index = <1>;
				interrupt-parent = <&mpic>;
				interrupts = <21 2>;
			};
			dma-channel@100 {
				compatible = "fsl,mpc8641-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x100 0x80>;
				cell-index = <2>;
				interrupt-parent = <&mpic>;
				interrupts = <22 2>;
			};
			dma-channel@180 {
				compatible = "fsl,mpc8641-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x180 0x80>;
				cell-index = <3>;
				interrupt-parent = <&mpic>;
				interrupts = <23 2>;
			};
		};

		enet0: ethernet@24000 {
			#address-cells = <1>;
			#size-cells = <1>;
			cell-index = <0>;
			device_type = "network";
			model = "TSEC";
			compatible = "gianfar";
			reg = <0x24000 0x1000>;
			ranges = <0x0 0x24000 0x1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <29 2 30  2 34 2>;
			interrupt-parent = <&mpic>;
			tbi-handle = <&tbi0>;
			phy-handle = <&phy0>;
			phy-connection-type = "rgmii-id";

			mdio@520 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,gianfar-mdio";
				reg = <0x520 0x20>;

				phy0: ethernet-phy@1f {
					interrupt-parent = <&mpic>;
					interrupts = <10 1>;
					reg = <0x1f>;
					device_type = "ethernet-phy";
				};
				phy1: ethernet-phy@0 {
					interrupt-parent = <&mpic>;
					interrupts = <10 1>;
					reg = <0>;
					device_type = "ethernet-phy";
				};
				phy2: ethernet-phy@1 {
					interrupt-parent = <&mpic>;
					interrupts = <10 1>;
					reg = <1>;
					device_type = "ethernet-phy";
				};
				phy3: ethernet-phy@2 {
					interrupt-parent = <&mpic>;
					interrupts = <10 1>;
					reg = <2>;
					device_type = "ethernet-phy";
				};
				tbi0: tbi-phy@11 {
					reg = <0x11>;
					device_type = "tbi-phy";
				};
			};
		};

		enet1: ethernet@25000 {
			#address-cells = <1>;
			#size-cells = <1>;
			cell-index = <1>;
			device_type = "network";
			model = "TSEC";
			compatible = "gianfar";
			reg = <0x25000 0x1000>;
			ranges = <0x0 0x25000 0x1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <35 2 36 2 40 2>;
			interrupt-parent = <&mpic>;
			tbi-handle = <&tbi1>;
			phy-handle = <&phy1>;
			phy-connection-type = "rgmii-id";

			mdio@520 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,gianfar-tbi";
				reg = <0x520 0x20>;

				tbi1: tbi-phy@11 {
					reg = <0x11>;
					device_type = "tbi-phy";
				};
			};
		};

		enet2: ethernet@26000 {
			#address-cells = <1>;
			#size-cells = <1>;
			cell-index = <2>;
			device_type = "network";
			model = "TSEC";
			compatible = "gianfar";
			reg = <0x26000 0x1000>;
			ranges = <0x0 0x26000 0x1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <31 2 32 2 33 2>;
			interrupt-parent = <&mpic>;
			tbi-handle = <&tbi2>;
			phy-handle = <&phy2>;
			phy-connection-type = "rgmii-id";

			mdio@520 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,gianfar-tbi";
				reg = <0x520 0x20>;

				tbi2: tbi-phy@11 {
					reg = <0x11>;
					device_type = "tbi-phy";
				};
			};
		};

		enet3: ethernet@27000 {
			#address-cells = <1>;
			#size-cells = <1>;
			cell-index = <3>;
			device_type = "network";
			model = "TSEC";
			compatible = "gianfar";
			reg = <0x27000 0x1000>;
			ranges = <0x0 0x27000 0x1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <37 2 38 2 39 2>;
			interrupt-parent = <&mpic>;
			tbi-handle = <&tbi3>;
			phy-handle = <&phy3>;
			phy-connection-type = "rgmii-id";

			mdio@520 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,gianfar-tbi";
				reg = <0x520 0x20>;

				tbi3: tbi-phy@11 {
					reg = <0x11>;
					device_type = "tbi-phy";
				};
			};
		};

		serial0: serial@4500 {
			cell-index = <0>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x4500 0x100>;
			clock-frequency = <0>;
			interrupts = <42 2>;
			interrupt-parent = <&mpic>;
		};

		serial1: serial@4600 {
			cell-index = <1>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x4600 0x100>;
			clock-frequency = <0>;
			interrupts = <28 2>;
			interrupt-parent = <&mpic>;
		};

		mpic: pic@40000 {
			clock-frequency = <0>;
			interrupt-controller;
			#address-cells = <0>;
			#interrupt-cells = <2>;
			reg = <0x40000 0x40000>;
			compatible = "chrp,open-pic";
			device_type = "open-pic";
			big-endian;
		};

		global-utilities@e0000 {
			compatible = "fsl,mpc8641-guts";
			reg = <0xe0000 0x1000>;
			fsl,has-rstcr;
		};
	};

	pci0: pcie@f8008000 {
		compatible = "fsl,mpc8641-pcie";
		device_type = "pci";
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0xf8008000 0x1000>;
		bus-range = <0x0 0xff>;
		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
		clock-frequency = <33333333>;
		interrupt-parent = <&mpic>;
		interrupts = <24 2>;
		interrupt-map-mask = <0xff00 0 0 7>;
		interrupt-map = <
			/* IDSEL 0x0 */
			0x0000 0 0 1 &mpic 0 1
			0x0000 0 0 2 &mpic 1 1
			0x0000 0 0 3 &mpic 2 1
			0x0000 0 0 4 &mpic 3 1
			>;

		pcie@0 {
			reg = <0 0 0 0 0>;
			#size-cells = <2>;
			#address-cells = <3>;
			device_type = "pci";
			ranges = <0x02000000 0x0 0x80000000
				  0x02000000 0x0 0x80000000
				  0x0 0x20000000

				  0x01000000 0x0 0x00000000
				  0x01000000 0x0 0x00000000
				  0x0 0x00100000>;
		};

	};

	pci1: pcie@f8009000 {
		compatible = "fsl,mpc8641-pcie";
		device_type = "pci";
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0xf8009000 0x1000>;
		bus-range = <0 0xff>;
		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
		clock-frequency = <33333333>;
		interrupt-parent = <&mpic>;
		interrupts = <25 2>;
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
			/* IDSEL 0x0 */
			0x0000 0 0 1 &mpic 4 1
			0x0000 0 0 2 &mpic 5 1
			0x0000 0 0 3 &mpic 6 1
			0x0000 0 0 4 &mpic 7 1
			>;

		pcie@0 {
			reg = <0 0 0 0 0>;
			#size-cells = <2>;
			#address-cells = <3>;
			device_type = "pci";
			ranges = <0x02000000 0x0 0xa0000000
				  0x02000000 0x0 0xa0000000
				  0x0 0x20000000

				  0x01000000 0x0 0x00000000
				  0x01000000 0x0 0x00000000
				  0x0 0x00100000>;
		};
	};
};