blob: 5adc1dac0e65d17e553b46494f1b67c641c521af [file] [log] [blame] [edit]
/*
* Enhanced Direct Memory Access (EDMA3) Controller
*
* (C) Copyright 2014
* Texas Instruments Incorporated, <www.ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _EDMA3_H_
#define _EDMA3_H_
#include <linux/stddef.h>
#define EDMA3_PARSET_NULL_LINK 0xffff
/*
* All parameter RAM set options
* opt field in edma3_param_set_config structure
*/
#define EDMA3_SLOPT_PRIV_LEVEL BIT(31)
#define EDMA3_SLOPT_PRIV_ID(id) ((0xf & (id)) << 24)
#define EDMA3_SLOPT_INTERM_COMP_CHAIN_ENB BIT(23)
#define EDMA3_SLOPT_TRANS_COMP_CHAIN_ENB BIT(22)
#define EDMA3_SLOPT_INTERM_COMP_INT_ENB BIT(21)
#define EDMA3_SLOPT_TRANS_COMP_INT_ENB BIT(20)
#define EDMA3_SLOPT_COMP_CODE(code) ((0x3f & (code)) << 12)
#define EDMA3_SLOPT_FIFO_WIDTH_8 0
#define EDMA3_SLOPT_FIFO_WIDTH_16 (1 << 8)
#define EDMA3_SLOPT_FIFO_WIDTH_32 (2 << 8)
#define EDMA3_SLOPT_FIFO_WIDTH_64 (3 << 8)
#define EDMA3_SLOPT_FIFO_WIDTH_128 (4 << 8)
#define EDMA3_SLOPT_FIFO_WIDTH_256 (5 << 8)
#define EDMA3_SLOPT_FIFO_WIDTH_SET(w) ((w & 0x7) << 8)
#define EDMA3_SLOPT_STATIC BIT(3)
#define EDMA3_SLOPT_AB_SYNC BIT(2)
#define EDMA3_SLOPT_DST_ADDR_CONST_MODE BIT(1)
#define EDMA3_SLOPT_SRC_ADDR_CONST_MODE BIT(0)
enum edma3_address_mode {
INCR = 0,
FIFO = 1
};
enum edma3_fifo_width {
W8BIT = 0,
W16BIT = 1,
W32BIT = 2,
W64BIT = 3,
W128BIT = 4,
W256BIT = 5
};
enum edma3_sync_dimension {
ASYNC = 0,
ABSYNC = 1
};
/* PaRAM slots are laid out like this */
struct edma3_slot_layout {
u32 opt;
u32 src;
u32 a_b_cnt;
u32 dst;
u32 src_dst_bidx;
u32 link_bcntrld;
u32 src_dst_cidx;
u32 ccnt;
} __packed;
/*
* Use this to assign trigger word number of edma3_slot_layout struct.
* trigger_word_name - is the exact name from edma3_slot_layout.
*/
#define EDMA3_TWORD(trigger_word_name)\
(offsetof(struct edma3_slot_layout, trigger_word_name) / 4)
struct edma3_slot_config {
u32 opt;
u32 src;
u32 dst;
int bcnt;
int acnt;
int ccnt;
int src_bidx;
int dst_bidx;
int src_cidx;
int dst_cidx;
int bcntrld;
int link;
};
struct edma3_channel_config {
int slot;
int chnum;
int complete_code; /* indicate pending complete interrupt */
int trigger_slot_word; /* only used for qedma */
};
void qedma3_start(u32 base, struct edma3_channel_config *cfg);
void qedma3_stop(u32 base, struct edma3_channel_config *cfg);
void edma3_slot_configure(u32 base, int slot, struct edma3_slot_config *cfg);
int edma3_check_for_transfer(u32 base, struct edma3_channel_config *cfg);
void edma3_write_slot(u32 base, int slot, struct edma3_slot_layout *param);
void edma3_read_slot(u32 base, int slot, struct edma3_slot_layout *param);
void edma3_set_dest(u32 base, int slot, u32 dst, enum edma3_address_mode mode,
enum edma3_fifo_width width);
void edma3_set_dest_index(u32 base, unsigned slot, int bidx, int cidx);
void edma3_set_dest_addr(u32 base, int slot, u32 dst);
void edma3_set_src(u32 base, int slot, u32 src, enum edma3_address_mode mode,
enum edma3_fifo_width width);
void edma3_set_src_index(u32 base, unsigned slot, int bidx, int cidx);
void edma3_set_src_addr(u32 base, int slot, u32 src);
void edma3_set_transfer_params(u32 base, int slot, int acnt,
int bcnt, int ccnt, u16 bcnt_rld,
enum edma3_sync_dimension sync_mode);
#endif