blob: 6b7d600a9c624cab1c71f46659badb1db3a1aad0 [file] [log] [blame]
/*
* UniPhier DDR PHY registers
*
* Copyright (C) 2014 Panasonic Corporation
* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef ARCH_DDRPHY_REGS_H
#define ARCH_DDRPHY_REGS_H
#include <linux/compiler.h>
#ifndef __ASSEMBLY__
struct ddrphy {
u32 ridr; /* Revision Identification Register */
u32 pir; /* PHY Initialixation Register */
u32 pgcr[2]; /* PHY General Configuration Register */
u32 pgsr[2]; /* PHY General Status Register */
u32 pllcr; /* PLL Control Register */
u32 ptr[5]; /* PHY Timing Register */
u32 acmdlr; /* AC Master Delay Line Register */
u32 acbdlr; /* AC Bit Delay Line Register */
u32 aciocr; /* AC I/O Configuration Register */
u32 dxccr; /* DATX8 Common Configuration Register */
u32 dsgcr; /* DDR System General Configuration Register */
u32 dcr; /* DRAM Configuration Register */
u32 dtpr[3]; /* DRAM Timing Parameters Register */
u32 mr0; /* Mode Register 0 */
u32 mr1; /* Mode Register 1 */
u32 mr2; /* Mode Register 2 */
u32 mr3; /* Mode Register 3 */
u32 odtcr; /* ODT Configuration Register */
u32 dtcr; /* Data Training Configuration Register */
u32 dtar[4]; /* Data Training Address Register */
u32 dtdr[2]; /* Data Training Data Register */
u32 dtedr[2]; /* Data Training Eye Data Register */
u32 rsv0[13]; /* Reserved */
u32 dcuar; /* DCU Address Register */
u32 dcudr; /* DCU Data Register */
u32 dcurr; /* DCU Run Register */
u32 dculr; /* DCU Loop Register */
u32 dcugcr; /* DCU General Configuration Register */
u32 dcutpr; /* DCU Timing Parameters Register */
u32 dcusr[2]; /* DCU Status Register */
u32 rsv1[8]; /* Reserved */
u32 bistrr; /* BIST Run Register */
u32 bistwcr; /* BIST Word Count Register */
u32 bistmskr[3]; /* BIST Mask Register */
u32 bistlsr; /* BIST LFSR Sed Register */
u32 bistar[3]; /* BIST Address Register */
u32 bistudpr; /* BIST User Data Pattern Register */
u32 bistgsr; /* BIST General Status Register */
u32 bistwer; /* BIST Word Error Register */
u32 bistber[4]; /* BIST Bit Error Register */
u32 bistwcsr; /* BIST Word Count Status Register */
u32 bistfwr[3]; /* BIST Fail Word Register */
u32 rsv2[10]; /* Reserved */
u32 gpr[2]; /* General Purpose Register */
struct ddrphy_zq { /* ZQ */
u32 cr[2]; /* Impedance Control Register */
u32 sr[2]; /* Impedance Status Register */
} zq[4];
struct ddrphy_datx8 { /* DATX8 */
u32 gcr; /* General Configuration Register */
u32 gsr[2]; /* General Status Register */
u32 bdlr[5]; /* Bit Delay Line Register */
u32 lcdlr[3]; /* Local Calibrated Delay Line Register */
u32 mdlr; /* Master Delay Line Register */
u32 gtr; /* General Timing Register */
u32 rsv[3]; /* Reserved */
} dx[9];
};
#endif /* __ASSEMBLY__ */
#define PIR_INIT (1 << 0) /* Initialization Trigger */
#define PIR_ZCAL (1 << 1) /* Impedance Calibration */
#define PIR_PLLINIT (1 << 4) /* PLL Initialization */
#define PIR_DCAL (1 << 5) /* DDL Calibration */
#define PIR_PHYRST (1 << 6) /* PHY Reset */
#define PIR_DRAMRST (1 << 7) /* DRAM Reset */
#define PIR_DRAMINIT (1 << 8) /* DRAM Initialization */
#define PIR_WL (1 << 9) /* Write Leveling */
#define PIR_QSGATE (1 << 10) /* Read DQS Gate Training */
#define PIR_WLADJ (1 << 11) /* Write Leveling Adjust */
#define PIR_RDDSKW (1 << 12) /* Read Data Bit Deskew */
#define PIR_WRDSKW (1 << 13) /* Write Data Bit Deskew */
#define PIR_RDEYE (1 << 14) /* Read Data Eye Training */
#define PIR_WREYE (1 << 15) /* Write Data Eye Training */
#define PIR_LOCKBYP (1 << 28) /* PLL Lock Bypass */
#define PIR_DCALBYP (1 << 29) /* DDL Calibration Bypass */
#define PIR_ZCALBYP (1 << 30) /* Impedance Calib Bypass */
#define PIR_INITBYP (1 << 31) /* Initialization Bypass */
#define PGSR0_IDONE (1 << 0) /* Initialization Done */
#define PGSR0_PLDONE (1 << 1) /* PLL Lock Done */
#define PGSR0_DCDONE (1 << 2) /* DDL Calibration Done */
#define PGSR0_ZCDONE (1 << 3) /* Impedance Calibration Done */
#define PGSR0_DIDONE (1 << 4) /* DRAM Initialization Done */
#define PGSR0_WLDONE (1 << 5) /* Write Leveling Done */
#define PGSR0_QSGDONE (1 << 6) /* DQS Gate Training Done */
#define PGSR0_WLADONE (1 << 7) /* Write Leveling Adjust Done */
#define PGSR0_RDDONE (1 << 8) /* Read Bit Deskew Done */
#define PGSR0_WDDONE (1 << 9) /* Write Bit Deskew Done */
#define PGSR0_REDONE (1 << 10) /* Read Eye Training Done */
#define PGSR0_WEDONE (1 << 11) /* Write Eye Training Done */
#define PGSR0_IERR (1 << 16) /* Initialization Error */
#define PGSR0_PLERR (1 << 17) /* PLL Lock Error */
#define PGSR0_DCERR (1 << 18) /* DDL Calibration Error */
#define PGSR0_ZCERR (1 << 19) /* Impedance Calib Error */
#define PGSR0_DIERR (1 << 20) /* DRAM Initialization Error */
#define PGSR0_WLERR (1 << 21) /* Write Leveling Error */
#define PGSR0_QSGERR (1 << 22) /* DQS Gate Training Error */
#define PGSR0_WLAERR (1 << 23) /* Write Leveling Adj Error */
#define PGSR0_RDERR (1 << 24) /* Read Bit Deskew Error */
#define PGSR0_WDERR (1 << 25) /* Write Bit Deskew Error */
#define PGSR0_REERR (1 << 26) /* Read Eye Training Error */
#define PGSR0_WEERR (1 << 27) /* Write Eye Training Error */
#define PGSR0_DTERR_SHIFT 28 /* Data Training Error Status*/
#define PGSR0_DTERR (7 << (PGSR0_DTERR_SHIFT))
#define PGSR0_APLOCK (1 << 31) /* AC PLL Lock */
#define DXCCR_DQSRES_OPEN (0 << 5)
#define DXCCR_DQSRES_688_OHM (1 << 5)
#define DXCCR_DQSRES_611_OHM (2 << 5)
#define DXCCR_DQSRES_550_OHM (3 << 5)
#define DXCCR_DQSRES_500_OHM (4 << 5)
#define DXCCR_DQSRES_458_OHM (5 << 5)
#define DXCCR_DQSRES_393_OHM (6 << 5)
#define DXCCR_DQSRES_344_OHM (7 << 5)
#define DXCCR_DQSNRES_OPEN (0 << 9)
#define DXCCR_DQSNRES_688_OHM (1 << 9)
#define DXCCR_DQSNRES_611_OHM (2 << 9)
#define DXCCR_DQSNRES_550_OHM (3 << 9)
#define DXCCR_DQSNRES_500_OHM (4 << 9)
#define DXCCR_DQSNRES_458_OHM (5 << 9)
#define DXCCR_DQSNRES_393_OHM (6 << 9)
#define DXCCR_DQSNRES_344_OHM (7 << 9)
#define DTCR_DTRANK_SHIFT 4 /* Data Training Rank */
#define DTCR_DTRANK_MASK (0x3 << (DTCR_DTRANK_SHIFT))
#define DTCR_DTMPR (1 << 6) /* Data Training using MPR */
#define DTCR_RNKEN_SHIFT 24 /* Rank Enable */
#define DTCR_RNKEN_MASK (0xf << (DTCR_RNKEN_SHIFT))
#define DXGCR_WLRKEN_SHIFT 26 /* Write Level Rank Enable */
#define DXGCR_WLRKEN_MASK (0xf << (DXGCR_WLRKEN_SHIFT))
/* SoC-specific parameters */
#define NR_DATX8_PER_DDRPHY 2
#if defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8)
#define NR_DDRPHY_PER_CH 1
#else
#define NR_DDRPHY_PER_CH 2
#endif
#define NR_DDRCH 2
#define DDRPHY_BASE(ch, phy) (0x5bc01000 + 0x200000 * (ch) + 0x1000 * (phy))
#ifndef __ASSEMBLY__
void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size);
void ddrphy_prepare_training(struct ddrphy __iomem *phy, int rank);
int ddrphy_training(struct ddrphy __iomem *phy);
#endif
#endif /* ARCH_DDRPHY_REGS_H */