u-boot-imx/arch/x86/cpu/ivybridge/bd82x6x.c

/*
 * Copyright (C) 2014 Google, Inc
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <common.h>
#include <errno.h>
#include <fdtdec.h>
#include <malloc.h>
#include <asm/lapic.h>
#include <asm/pci.h>
#include <asm/arch/bd82x6x.h>
#include <asm/arch/model_206ax.h>
#include <asm/arch/pch.h>
#include <asm/arch/sandybridge.h>

void bd82x6x_pci_init(pci_dev_t dev)
{
	u16 reg16;
	u8 reg8;

	debug("bd82x6x PCI init.\n");
	/* Enable Bus Master */
	reg16 = pci_read_config16(dev, PCI_COMMAND);
	reg16 |= PCI_COMMAND_MASTER;
	pci_write_config16(dev, PCI_COMMAND, reg16);

	/* This device has no interrupt */
	pci_write_config8(dev, INTR, 0xff);

	/* disable parity error response and SERR */
	reg16 = pci_read_config16(dev, BCTRL);
	reg16 &= ~(1 << 0);
	reg16 &= ~(1 << 1);
	pci_write_config16(dev, BCTRL, reg16);

	/* Master Latency Count must be set to 0x04! */
	reg8 = pci_read_config8(dev, SMLT);
	reg8 &= 0x07;
	reg8 |= (0x04 << 3);
	pci_write_config8(dev, SMLT, reg8);

	/* Will this improve throughput of bus masters? */
	pci_write_config8(dev, PCI_MIN_GNT, 0x06);

	/* Clear errors in status registers */
	reg16 = pci_read_config16(dev, PSTS);
	/* reg16 |= 0xf900; */
	pci_write_config16(dev, PSTS, reg16);

	reg16 = pci_read_config16(dev, SECSTS);
	/* reg16 |= 0xf900; */
	pci_write_config16(dev, SECSTS, reg16);
}

#define PCI_BRIDGE_UPDATE_COMMAND
void bd82x6x_pci_dev_enable_resources(pci_dev_t dev)
{
	uint16_t command;

	command = pci_read_config16(dev, PCI_COMMAND);
	command |= PCI_COMMAND_IO;
#ifdef PCI_BRIDGE_UPDATE_COMMAND
	/*
	 * If we write to PCI_COMMAND, on some systems this will cause the
	 * ROM and APICs to become invisible.
	 */
	debug("%x cmd <- %02x\n", dev, command);
	pci_write_config16(dev, PCI_COMMAND, command);
#else
	printf("%s cmd <- %02x (NOT WRITTEN!)\n", dev_path(dev), command);
#endif
}

void bd82x6x_pci_bus_enable_resources(pci_dev_t dev)
{
	uint16_t ctrl;

	ctrl = pci_read_config16(dev, PCI_BRIDGE_CONTROL);
	ctrl |= PCI_COMMAND_IO;
	ctrl |= PCI_BRIDGE_CTL_VGA;
	debug("%x bridge ctrl <- %04x\n", dev, ctrl);
	pci_write_config16(dev, PCI_BRIDGE_CONTROL, ctrl);

	bd82x6x_pci_dev_enable_resources(dev);
}

int bd82x6x_init_pci_devices(void)
{
	const void *blob = gd->fdt_blob;
	struct pci_controller *hose;
	struct x86_cpu_priv *cpu;
	int sata_node, gma_node;
	int ret;

	hose = pci_bus_to_hose(0);
	lpc_enable(PCH_LPC_DEV);
	lpc_init(hose, PCH_LPC_DEV);
	sata_node = fdtdec_next_compatible(blob, 0,
					   COMPAT_INTEL_PANTHERPOINT_AHCI);
	if (sata_node < 0) {
		debug("%s: Cannot find SATA node\n", __func__);
		return -EINVAL;
	}
	bd82x6x_sata_init(PCH_SATA_DEV, blob, sata_node);
	bd82x6x_usb_ehci_init(PCH_EHCI1_DEV);
	bd82x6x_usb_ehci_init(PCH_EHCI2_DEV);

	cpu = calloc(1, sizeof(*cpu));
	if (!cpu)
		return -ENOMEM;
	model_206ax_init(cpu);

	gma_node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_GMA);
	if (gma_node < 0) {
		debug("%s: Cannot find GMA node\n", __func__);
		return -EINVAL;
	}
	ret = gma_func0_init(PCH_VIDEO_DEV, pci_bus_to_hose(0), blob,
			     gma_node);
	if (ret)
		return ret;

	return 0;
}

int bd82x6x_init(void)
{
	const void *blob = gd->fdt_blob;
	int sata_node;

	sata_node = fdtdec_next_compatible(blob, 0,
					   COMPAT_INTEL_PANTHERPOINT_AHCI);
	if (sata_node < 0) {
		debug("%s: Cannot find SATA node\n", __func__);
		return -EINVAL;
	}

	bd82x6x_pci_init(PCH_DEV);
	bd82x6x_sata_enable(PCH_SATA_DEV, blob, sata_node);
	northbridge_enable(PCH_DEV);
	northbridge_init(PCH_DEV);

	return 0;
}