blob: 1e3cb6179f4da90be70cecf4ede8477600109bbf [file] [log] [blame] [edit]
/*
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#include <common.h>
#include <pci.h>
#include <asm/immap.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
puts("Board: ");
puts("Freescale FireEngine 5475 EVB\n");
return 0;
};
phys_size_t initdram(int board_type)
{
siu_t *siu = (siu_t *) (MMAP_SIU);
sdram_t *sdram = (sdram_t *)(MMAP_SDRAM);
u32 dramsize, i;
#ifdef CONFIG_SYS_DRAMSZ1
u32 temp;
#endif
out_be32(&siu->drv, CONFIG_SYS_SDRAM_DRVSTRENGTH);
dramsize = CONFIG_SYS_DRAMSZ * 0x100000;
for (i = 0x13; i < 0x20; i++) {
if (dramsize == (1 << i))
break;
}
i--;
out_be32(&siu->cs0cfg, CONFIG_SYS_SDRAM_BASE | i);
#ifdef CONFIG_SYS_DRAMSZ1
temp = CONFIG_SYS_DRAMSZ1 * 0x100000;
for (i = 0x13; i < 0x20; i++) {
if (temp == (1 << i))
break;
}
i--;
dramsize += temp;
out_be32(&siu->cs1cfg, (CONFIG_SYS_SDRAM_BASE + temp) | i);
#endif
out_be32(&sdram->cfg1, CONFIG_SYS_SDRAM_CFG1);
out_be32(&sdram->cfg2, CONFIG_SYS_SDRAM_CFG2);
/* Issue PALL */
out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
/* Issue LEMR */
out_be32(&sdram->mode, CONFIG_SYS_SDRAM_EMOD);
out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE | 0x04000000);
udelay(500);
/* Issue PALL */
out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
/* Perform two refresh cycles */
out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE);
out_be32(&sdram->ctrl,
(CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00);
udelay(100);
return dramsize;
};
int testdram(void)
{
/* TODO: XXX XXX XXX */
printf("DRAM test not implemented!\n");
return (0);
}
#if defined(CONFIG_PCI)
/*
* Initialize PCI devices, report devices found.
*/
static struct pci_controller hose;
extern void pci_mcf547x_8x_init(struct pci_controller *hose);
void pci_init_board(void)
{
pci_mcf547x_8x_init(&hose);
}
#endif /* CONFIG_PCI */