| /* | |
| * (C) Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering | |
| * | |
| * Copyright (C) 2006 Micronas GmbH | |
| * | |
| * SPDX-License-Identifier: GPL-2.0+ | |
| */ | |
| #include <common.h> | |
| #include <command.h> | |
| #include <netdev.h> | |
| #include <asm/mipsregs.h> | |
| #include "vct.h" | |
| #if defined(CONFIG_VCT_PREMIUM) | |
| #define BOARD_NAME "PremiumD" | |
| #elif defined(CONFIG_VCT_PLATINUM) | |
| #define BOARD_NAME "PlatinumD" | |
| #elif defined(CONFIG_VCT_PLATINUMAVC) | |
| #define BOARD_NAME "PlatinumAVC" | |
| #else | |
| #error "vct: No board variant defined!" | |
| #endif | |
| #if defined(CONFIG_VCT_ONENAND) | |
| #define BOARD_NAME_ADD " OneNAND" | |
| #else | |
| #define BOARD_NAME_ADD " NOR" | |
| #endif | |
| int board_early_init_f(void) | |
| { | |
| /* | |
| * First initialize the PIN mulitplexing | |
| */ | |
| vct_pin_mux_initialize(); | |
| /* | |
| * Init the EBI very early so that FLASH can be accessed | |
| */ | |
| ebi_initialize(); | |
| return 0; | |
| } | |
| void _machine_restart(void) | |
| { | |
| reg_write(DCGU_EN_WDT_RESET(DCGU_BASE), DCGU_MAGIC_WDT); | |
| reg_write(WDT_TORR(WDT_BASE), 0x00); | |
| reg_write(WDT_CR(WDT_BASE), 0x1D); | |
| /* | |
| * Now wait for the watchdog to trigger the reset | |
| */ | |
| udelay(1000000); | |
| } | |
| /* | |
| * SDRAM is already configured by the bootstrap code, only return the | |
| * auto-detected size here | |
| */ | |
| phys_size_t initdram(int board_type) | |
| { | |
| return get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, | |
| CONFIG_SYS_MBYTES_SDRAM << 20); | |
| } | |
| int checkboard(void) | |
| { | |
| char buf[64]; | |
| int i = getenv_f("serial#", buf, sizeof(buf)); | |
| u32 config0 = read_c0_prid(); | |
| if ((config0 & 0xff0000) == PRID_COMP_LEGACY | |
| && (config0 & 0xff00) == PRID_IMP_LX4280) { | |
| puts("Board: MDED \n"); | |
| printf("CPU: LX4280 id: 0x%02x, rev: 0x%02x\n", | |
| (config0 >> 8) & 0xFF, config0 & 0xFF); | |
| } else if ((config0 & 0xff0000) == PRID_COMP_MIPS | |
| && (config0 & 0xff00) == PRID_IMP_VGC) { | |
| u32 jedec_id = *((u32 *) 0xBEBC71A0); | |
| if ((((jedec_id) >> 12) & 0xFF) == 0x40) { | |
| puts("Board: VGCA \n"); | |
| } else if ((((jedec_id) >> 12) & 0xFF) == 0x48 | |
| || (((jedec_id) >> 12) & 0xFF) == 0x49) { | |
| puts("Board: VGCB \n"); | |
| } | |
| printf("CPU: MIPS 4K id: 0x%02x, rev: 0x%02x\n", | |
| (config0 >> 8) & 0xFF, config0 & 0xFF); | |
| } else if (config0 == 0x19378) { | |
| printf("CPU: MIPS 24K id: 0x%02x, rev: 0x%02x\n", | |
| (config0 >> 8) & 0xFF, config0 & 0xFF); | |
| } else { | |
| printf("Unsupported cpu %d, proc_id=0x%x\n", config0 >> 24, | |
| config0); | |
| } | |
| printf("Board: Micronas VCT " BOARD_NAME BOARD_NAME_ADD); | |
| if (i > 0) { | |
| puts(", serial# "); | |
| puts(buf); | |
| } | |
| putc('\n'); | |
| return 0; | |
| } | |
| int board_eth_init(bd_t *bis) | |
| { | |
| int rc = 0; | |
| #ifdef CONFIG_SMC911X | |
| rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); | |
| #endif | |
| return rc; | |
| } |