/*
    comedi/drivers/rtd520.h
    Comedi driver defines for Real Time Devices (RTD) PCI4520/DM7520

    COMEDI - Linux Control and Measurement Device Interface
    Copyright (C) 2001 David A. Schleef <ds@schleef.org>

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/

/*
    Created by Dan Christian, NASA Ames Research Center.
    See board notes in rtd520.c
*/

/*
  LAS0 Runtime Area
  Local Address Space 0 Offset		Read Function	Write Function
*/
#define LAS0_SPARE_00    0x0000	/*  -                               - */
#define LAS0_SPARE_04    0x0004	/*  -                               - */
#define LAS0_USER_IO     0x0008	/*  Read User Inputs                Write User Outputs */
#define LAS0_SPARE_0C    0x000C	/*  -                               - */
#define LAS0_ADC         0x0010	/*  Read FIFO Status                Software A/D Start */
#define LAS0_DAC1        0x0014	/*  -                               Software D/A1 Update */
#define LAS0_DAC2        0x0018	/*  -                               Software D/A2 Update */
#define LAS0_SPARE_1C    0x001C	/*  -                               - */
#define LAS0_SPARE_20    0x0020	/*  -                               - */
#define LAS0_DAC         0x0024	/*  -                               Software Simultaneous D/A1 and D/A2 Update */
#define LAS0_PACER       0x0028	/*  Software Pacer Start            Software Pacer Stop */
#define LAS0_TIMER       0x002C	/*  Read Timer Counters Status      HDIN Software Trigger */
#define LAS0_IT          0x0030	/*  Read Interrupt Status           Write Interrupt Enable Mask Register */
#define LAS0_CLEAR       0x0034	/*  Clear ITs set by Clear Mask     Set Interrupt Clear Mask */
#define LAS0_OVERRUN     0x0038	/*  Read pending interrupts         Clear Overrun Register */
#define LAS0_SPARE_3C    0x003C	/*  -                               - */

/*
  LAS0 Runtime Area Timer/Counter,Dig.IO
  Name			Local Address			Function
*/
#define LAS0_PCLK        0x0040	/*  Pacer Clock value (24bit)             Pacer Clock load (24bit) */
#define LAS0_BCLK        0x0044	/*  Burst Clock value (10bit)             Burst Clock load (10bit) */
#define LAS0_ADC_SCNT    0x0048	/*  A/D Sample counter value (10bit)      A/D Sample counter load (10bit) */
#define LAS0_DAC1_UCNT   0x004C	/*  D/A1 Update counter value (10 bit)    D/A1 Update counter load (10bit) */
#define LAS0_DAC2_UCNT   0x0050	/*  D/A2 Update counter value (10 bit)    D/A2 Update counter load (10bit) */
#define LAS0_DCNT        0x0054	/*  Delay counter value (16 bit)          Delay counter load (16bit) */
#define LAS0_ACNT        0x0058	/*  About counter value (16 bit)          About counter load (16bit) */
#define LAS0_DAC_CLK     0x005C	/*  DAC clock value (16bit)               DAC clock load (16bit) */
#define LAS0_UTC0        0x0060	/*  8254 TC Counter 0 User TC 0 value     Load count in TC Counter 0 */
#define LAS0_UTC1        0x0064	/*  8254 TC Counter 1 User TC 1 value     Load count in TC Counter 1 */
#define LAS0_UTC2        0x0068	/*  8254 TC Counter 2 User TC 2 value     Load count in TC Counter 2 */
#define LAS0_UTC_CTRL    0x006C	/*  8254 TC Control Word                  Program counter mode for TC */
#define LAS0_DIO0        0x0070	/*  Digital I/O Port 0 Read Port          Digital I/O Port 0 Write Port */
#define LAS0_DIO1        0x0074	/*  Digital I/O Port 1 Read Port          Digital I/O Port 1 Write Port */
#define LAS0_DIO0_CTRL   0x0078	/*  Clear digital IRQ status flag/read    Clear digital chip/program Port 0 */
#define LAS0_DIO_STATUS  0x007C	/*  Read Digital I/O Status word          Program digital control register & */

/*
  LAS0 Setup Area
  Name			Local Address			Function
*/
#define LAS0_BOARD_RESET        0x0100	/*  Board reset */
#define LAS0_DMA0_SRC           0x0104	/*  DMA 0 Sources select */
#define LAS0_DMA1_SRC           0x0108	/*  DMA 1 Sources select */
#define LAS0_ADC_CONVERSION     0x010C	/*  A/D Conversion Signal select */
#define LAS0_BURST_START        0x0110	/*  Burst Clock Start Trigger select */
#define LAS0_PACER_START        0x0114	/*  Pacer Clock Start Trigger select */
#define LAS0_PACER_STOP         0x0118	/*  Pacer Clock Stop Trigger select */
#define LAS0_ACNT_STOP_ENABLE   0x011C	/*  About Counter Stop Enable */
#define LAS0_PACER_REPEAT       0x0120	/*  Pacer Start Trigger Mode select */
#define LAS0_DIN_START          0x0124	/*  High Speed Digital Input Sampling Signal select */
#define LAS0_DIN_FIFO_CLEAR     0x0128	/*  Digital Input FIFO Clear */
#define LAS0_ADC_FIFO_CLEAR     0x012C	/*  A/D FIFO Clear */
#define LAS0_CGT_WRITE          0x0130	/*  Channel Gain Table Write */
#define LAS0_CGL_WRITE          0x0134	/*  Channel Gain Latch Write */
#define LAS0_CG_DATA            0x0138	/*  Digital Table Write */
#define LAS0_CGT_ENABLE		0x013C	/*  Channel Gain Table Enable */
#define LAS0_CG_ENABLE          0x0140	/*  Digital Table Enable */
#define LAS0_CGT_PAUSE          0x0144	/*  Table Pause Enable */
#define LAS0_CGT_RESET          0x0148	/*  Reset Channel Gain Table */
#define LAS0_CGT_CLEAR          0x014C	/*  Clear Channel Gain Table */
#define LAS0_DAC1_CTRL          0x0150	/*  D/A1 output type/range */
#define LAS0_DAC1_SRC           0x0154	/*  D/A1 update source */
#define LAS0_DAC1_CYCLE         0x0158	/*  D/A1 cycle mode */
#define LAS0_DAC1_RESET         0x015C	/*  D/A1 FIFO reset */
#define LAS0_DAC1_FIFO_CLEAR    0x0160	/*  D/A1 FIFO clear */
#define LAS0_DAC2_CTRL          0x0164	/*  D/A2 output type/range */
#define LAS0_DAC2_SRC           0x0168	/*  D/A2 update source */
#define LAS0_DAC2_CYCLE         0x016C	/*  D/A2 cycle mode */
#define LAS0_DAC2_RESET         0x0170	/*  D/A2 FIFO reset */
#define LAS0_DAC2_FIFO_CLEAR    0x0174	/*  D/A2 FIFO clear */
#define LAS0_ADC_SCNT_SRC       0x0178	/*  A/D Sample Counter Source select */
#define LAS0_PACER_SELECT       0x0180	/*  Pacer Clock select */
#define LAS0_SBUS0_SRC          0x0184	/*  SyncBus 0 Source select */
#define LAS0_SBUS0_ENABLE       0x0188	/*  SyncBus 0 enable */
#define LAS0_SBUS1_SRC          0x018C	/*  SyncBus 1 Source select */
#define LAS0_SBUS1_ENABLE       0x0190	/*  SyncBus 1 enable */
#define LAS0_SBUS2_SRC          0x0198	/*  SyncBus 2 Source select */
#define LAS0_SBUS2_ENABLE       0x019C	/*  SyncBus 2 enable */
#define LAS0_ETRG_POLARITY      0x01A4	/*  External Trigger polarity select */
#define LAS0_EINT_POLARITY      0x01A8	/*  External Interrupt polarity select */
#define LAS0_UTC0_CLOCK         0x01AC	/*  UTC0 Clock select */
#define LAS0_UTC0_GATE          0x01B0	/*  UTC0 Gate select */
#define LAS0_UTC1_CLOCK         0x01B4	/*  UTC1 Clock select */
#define LAS0_UTC1_GATE          0x01B8	/*  UTC1 Gate select */
#define LAS0_UTC2_CLOCK         0x01BC	/*  UTC2 Clock select */
#define LAS0_UTC2_GATE          0x01C0	/*  UTC2 Gate select */
#define LAS0_UOUT0_SELECT       0x01C4	/*  User Output 0 source select */
#define LAS0_UOUT1_SELECT       0x01C8	/*  User Output 1 source select */
#define LAS0_DMA0_RESET         0x01CC	/*  DMA0 Request state machine reset */
#define LAS0_DMA1_RESET         0x01D0	/*  DMA1 Request state machine reset */

/*
  LAS1
  Name			Local Address			Function
*/
#define LAS1_ADC_FIFO            0x0000	/*  Read A/D FIFO (16bit) - */
#define LAS1_HDIO_FIFO           0x0004	/*  Read High Speed Digital Input FIFO (16bit) - */
#define LAS1_DAC1_FIFO           0x0008	/*  - Write D/A1 FIFO (16bit) */
#define LAS1_DAC2_FIFO           0x000C	/*  - Write D/A2 FIFO (16bit) */

/*
  LCFG: PLX 9080 local config & runtime registers
  Name			Local Address			Function
*/
#define LCFG_ITCSR              0x0068	/*  INTCSR, Interrupt Control/Status Register */
#define LCFG_DMAMODE0           0x0080	/*  DMA Channel 0 Mode Register */
#define LCFG_DMAPADR0           0x0084	/*  DMA Channel 0 PCI Address Register */
#define LCFG_DMALADR0           0x0088	/*  DMA Channel 0 Local Address Reg */
#define LCFG_DMASIZ0            0x008C	/*  DMA Channel 0 Transfer Size (Bytes) Register */
#define LCFG_DMADPR0            0x0090	/*  DMA Channel 0 Descriptor Pointer Register */
#define LCFG_DMAMODE1           0x0094	/*  DMA Channel 1 Mode Register */
#define LCFG_DMAPADR1           0x0098	/*  DMA Channel 1 PCI Address Register */
#define LCFG_DMALADR1           0x009C	/*  DMA Channel 1 Local Address Register */
#define LCFG_DMASIZ1            0x00A0	/*  DMA Channel 1 Transfer Size (Bytes) Register */
#define LCFG_DMADPR1            0x00A4	/*  DMA Channel 1 Descriptor Pointer Register */
#define LCFG_DMACSR0            0x00A8	/*  DMA Channel 0 Command/Status Register */
#define LCFG_DMACSR1            0x00A9	/*  DMA Channel 0 Command/Status Register */
#define LCFG_DMAARB             0x00AC	/*  DMA Arbitration Register */
#define LCFG_DMATHR             0x00B0	/*  DMA Threshold Register */

/*======================================================================
  Resister bit definitions
======================================================================*/

/*  FIFO Status Word Bits (RtdFifoStatus) */
#define FS_DAC1_NOT_EMPTY    0x0001	/*  D0  - DAC1 FIFO not empty */
#define FS_DAC1_HEMPTY   0x0002	/*  D1  - DAC1 FIFO half empty */
#define FS_DAC1_NOT_FULL     0x0004	/*  D2  - DAC1 FIFO not full */
#define FS_DAC2_NOT_EMPTY    0x0010	/*  D4  - DAC2 FIFO not empty */
#define FS_DAC2_HEMPTY   0x0020	/*  D5  - DAC2 FIFO half empty */
#define FS_DAC2_NOT_FULL     0x0040	/*  D6  - DAC2 FIFO not full */
#define FS_ADC_NOT_EMPTY     0x0100	/*  D8  - ADC FIFO not empty */
#define FS_ADC_HEMPTY    0x0200	/*  D9  - ADC FIFO half empty */
#define FS_ADC_NOT_FULL      0x0400	/*  D10 - ADC FIFO not full */
#define FS_DIN_NOT_EMPTY     0x1000	/*  D12 - DIN FIFO not empty */
#define FS_DIN_HEMPTY    0x2000	/*  D13 - DIN FIFO half empty */
#define FS_DIN_NOT_FULL      0x4000	/*  D14 - DIN FIFO not full */

/*  Timer Status Word Bits (GetTimerStatus) */
#define TS_PCLK_GATE   0x0001
/*  D0 - Pacer Clock Gate [0 - gated, 1 - enabled] */
#define TS_BCLK_GATE   0x0002
/*  D1 - Burst Clock Gate [0 - disabled, 1 - running] */
#define TS_DCNT_GATE   0x0004
/*  D2 - Pacer Clock Delayed Start Trigger [0 - delay over, 1 - delay in */
/*  progress] */
#define TS_ACNT_GATE   0x0008
/*  D3 - Pacer Clock About Trigger [0 - completed, 1 - in progress] */
#define TS_PCLK_RUN    0x0010
/*  D4 - Pacer Clock Shutdown Flag [0 - Pacer Clock cannot be start */
/*  triggered only by Software Pacer Start Command, 1 - Pacer Clock can */
/*  be start triggered] */

/*  External Trigger polarity select */
/*  External Interrupt polarity select */
#define POL_POSITIVE         0x0	/*  positive edge */
#define POL_NEGATIVE         0x1	/*  negative edge */

/*  User Output Signal select (SetUout0Source, SetUout1Source) */
#define UOUT_ADC                0x0	/*  A/D Conversion Signal */
#define UOUT_DAC1               0x1	/*  D/A1 Update */
#define UOUT_DAC2               0x2	/*  D/A2 Update */
#define UOUT_SOFTWARE           0x3	/*  Software Programmable */

/*  Pacer clock select (SetPacerSource) */
#define PCLK_INTERNAL           1	/*  Internal Pacer Clock */
#define PCLK_EXTERNAL           0	/*  External Pacer Clock */

/*  A/D Sample Counter Sources (SetAdcntSource, SetupSampleCounter) */
#define ADC_SCNT_CGT_RESET         0x0	/*  needs restart with StartPacer */
#define ADC_SCNT_FIFO_WRITE        0x1

/*  A/D Conversion Signal Select (for SetConversionSelect) */
#define ADC_START_SOFTWARE         0x0	/*  Software A/D Start */
#define ADC_START_PCLK             0x1	/*  Pacer Clock (Ext. Int. see Func.509) */
#define ADC_START_BCLK             0x2	/*  Burst Clock */
#define ADC_START_DIGITAL_IT       0x3	/*  Digital Interrupt */
#define ADC_START_DAC1_MARKER1     0x4	/*  D/A 1 Data Marker 1 */
#define ADC_START_DAC2_MARKER1     0x5	/*  D/A 2 Data Marker 1 */
#define ADC_START_SBUS0            0x6	/*  SyncBus 0 */
#define ADC_START_SBUS1            0x7	/*  SyncBus 1 */
#define ADC_START_SBUS2            0x8	/*  SyncBus 2 */

/*  Burst Clock start trigger select (SetBurstStart) */
#define BCLK_START_SOFTWARE        0x0	/*  Software A/D Start (StartBurst) */
#define BCLK_START_PCLK            0x1	/*  Pacer Clock */
#define BCLK_START_ETRIG           0x2	/*  External Trigger */
#define BCLK_START_DIGITAL_IT      0x3	/*  Digital Interrupt */
#define BCLK_START_SBUS0           0x4	/*  SyncBus 0 */
#define BCLK_START_SBUS1           0x5	/*  SyncBus 1 */
#define BCLK_START_SBUS2           0x6	/*  SyncBus 2 */

/*  Pacer Clock start trigger select (SetPacerStart) */
#define PCLK_START_SOFTWARE        0x0	/*  Software Pacer Start (StartPacer) */
#define PCLK_START_ETRIG           0x1	/*  External trigger */
#define PCLK_START_DIGITAL_IT      0x2	/*  Digital interrupt */
#define PCLK_START_UTC2            0x3	/*  User TC 2 out */
#define PCLK_START_SBUS0           0x4	/*  SyncBus 0 */
#define PCLK_START_SBUS1           0x5	/*  SyncBus 1 */
#define PCLK_START_SBUS2           0x6	/*  SyncBus 2 */
#define PCLK_START_D_SOFTWARE      0x8	/*  Delayed Software Pacer Start */
#define PCLK_START_D_ETRIG         0x9	/*  Delayed external trigger */
#define PCLK_START_D_DIGITAL_IT    0xA	/*  Delayed digital interrupt */
#define PCLK_START_D_UTC2          0xB	/*  Delayed User TC 2 out */
#define PCLK_START_D_SBUS0         0xC	/*  Delayed SyncBus 0 */
#define PCLK_START_D_SBUS1         0xD	/*  Delayed SyncBus 1 */
#define PCLK_START_D_SBUS2         0xE	/*  Delayed SyncBus 2 */
#define PCLK_START_ETRIG_GATED     0xF	/*  External Trigger Gated controlled mode */

/*  Pacer Clock Stop Trigger select (SetPacerStop) */
#define PCLK_STOP_SOFTWARE         0x0	/*  Software Pacer Stop (StopPacer) */
#define PCLK_STOP_ETRIG            0x1	/*  External Trigger */
#define PCLK_STOP_DIGITAL_IT       0x2	/*  Digital Interrupt */
#define PCLK_STOP_ACNT             0x3	/*  About Counter */
#define PCLK_STOP_UTC2             0x4	/*  User TC2 out */
#define PCLK_STOP_SBUS0            0x5	/*  SyncBus 0 */
#define PCLK_STOP_SBUS1            0x6	/*  SyncBus 1 */
#define PCLK_STOP_SBUS2            0x7	/*  SyncBus 2 */
#define PCLK_STOP_A_SOFTWARE       0x8	/*  About Software Pacer Stop */
#define PCLK_STOP_A_ETRIG          0x9	/*  About External Trigger */
#define PCLK_STOP_A_DIGITAL_IT     0xA	/*  About Digital Interrupt */
#define PCLK_STOP_A_UTC2           0xC	/*  About User TC2 out */
#define PCLK_STOP_A_SBUS0          0xD	/*  About SyncBus 0 */
#define PCLK_STOP_A_SBUS1          0xE	/*  About SyncBus 1 */
#define PCLK_STOP_A_SBUS2          0xF	/*  About SyncBus 2 */

/*  About Counter Stop Enable */
#define ACNT_STOP                  0x0	/*  stop enable */
#define ACNT_NO_STOP               0x1	/*  stop disabled */

/*  DAC update source (SetDAC1Start & SetDAC2Start) */
#define DAC_START_SOFTWARE         0x0	/*  Software Update */
#define DAC_START_CGT              0x1	/*  CGT controlled Update */
#define DAC_START_DAC_CLK          0x2	/*  D/A Clock */
#define DAC_START_EPCLK            0x3	/*  External Pacer Clock */
#define DAC_START_SBUS0            0x4	/*  SyncBus 0 */
#define DAC_START_SBUS1            0x5	/*  SyncBus 1 */
#define DAC_START_SBUS2            0x6	/*  SyncBus 2 */

/*  DAC Cycle Mode (SetDAC1Cycle, SetDAC2Cycle, SetupDAC) */
#define DAC_CYCLE_SINGLE           0x0	/*  not cycle */
#define DAC_CYCLE_MULTI            0x1	/*  cycle */

/*  8254 Operation Modes (Set8254Mode, SetupTimerCounter) */
#define M8254_EVENT_COUNTER        0	/*  Event Counter */
#define M8254_HW_ONE_SHOT          1	/*  Hardware-Retriggerable One-Shot */
#define M8254_RATE_GENERATOR       2	/*  Rate Generator */
#define M8254_SQUARE_WAVE          3	/*  Square Wave Mode */
#define M8254_SW_STROBE            4	/*  Software Triggered Strobe */
#define M8254_HW_STROBE            5	/*  Hardware Triggered Strobe (Retriggerable) */

/*  User Timer/Counter 0 Clock Select (SetUtc0Clock) */
#define CUTC0_8MHZ                 0x0	/*  8MHz */
#define CUTC0_EXT_TC_CLOCK1        0x1	/*  Ext. TC Clock 1 */
#define CUTC0_EXT_TC_CLOCK2        0x2	/*  Ext. TC Clock 2 */
#define CUTC0_EXT_PCLK             0x3	/*  Ext. Pacer Clock */

/*  User Timer/Counter 1 Clock Select (SetUtc1Clock) */
#define CUTC1_8MHZ                 0x0	/*  8MHz */
#define CUTC1_EXT_TC_CLOCK1        0x1	/*  Ext. TC Clock 1 */
#define CUTC1_EXT_TC_CLOCK2        0x2	/*  Ext. TC Clock 2 */
#define CUTC1_EXT_PCLK             0x3	/*  Ext. Pacer Clock */
#define CUTC1_UTC0_OUT             0x4	/*  User Timer/Counter 0 out */
#define CUTC1_DIN_SIGNAL           0x5	/*  High-Speed Digital Input   Sampling signal */

/*  User Timer/Counter 2 Clock Select (SetUtc2Clock) */
#define CUTC2_8MHZ                 0x0	/*  8MHz */
#define CUTC2_EXT_TC_CLOCK1        0x1	/*  Ext. TC Clock 1 */
#define CUTC2_EXT_TC_CLOCK2        0x2	/*  Ext. TC Clock 2 */
#define CUTC2_EXT_PCLK             0x3	/*  Ext. Pacer Clock */
#define CUTC2_UTC1_OUT             0x4	/*  User Timer/Counter 1 out */

/*  User Timer/Counter 0 Gate Select (SetUtc0Gate) */
#define GUTC0_NOT_GATED            0x0	/*  Not gated */
#define GUTC0_GATED                0x1	/*  Gated */
#define GUTC0_EXT_TC_GATE1         0x2	/*  Ext. TC Gate 1 */
#define GUTC0_EXT_TC_GATE2         0x3	/*  Ext. TC Gate 2 */

/*  User Timer/Counter 1 Gate Select (SetUtc1Gate) */
#define GUTC1_NOT_GATED            0x0	/*  Not gated */
#define GUTC1_GATED                0x1	/*  Gated */
#define GUTC1_EXT_TC_GATE1         0x2	/*  Ext. TC Gate 1 */
#define GUTC1_EXT_TC_GATE2         0x3	/*  Ext. TC Gate 2 */
#define GUTC1_UTC0_OUT             0x4	/*  User Timer/Counter 0 out */

/*  User Timer/Counter 2 Gate Select (SetUtc2Gate) */
#define GUTC2_NOT_GATED            0x0	/*  Not gated */
#define GUTC2_GATED                0x1	/*  Gated */
#define GUTC2_EXT_TC_GATE1         0x2	/*  Ext. TC Gate 1 */
#define GUTC2_EXT_TC_GATE2         0x3	/*  Ext. TC Gate 2 */
#define GUTC2_UTC1_OUT             0x4	/*  User Timer/Counter 1 out */

/*  Interrupt Source Masks (SetITMask, ClearITMask, GetITStatus) */
#define IRQM_ADC_FIFO_WRITE        0x0001	/*  ADC FIFO Write */
#define IRQM_CGT_RESET             0x0002	/*  Reset CGT */
#define IRQM_CGT_PAUSE             0x0008	/*  Pause CGT */
#define IRQM_ADC_ABOUT_CNT         0x0010	/*  About Counter out */
#define IRQM_ADC_DELAY_CNT         0x0020	/*  Delay Counter out */
#define IRQM_ADC_SAMPLE_CNT	   0x0040	/*  ADC Sample Counter */
#define IRQM_DAC1_UCNT             0x0080	/*  DAC1 Update Counter */
#define IRQM_DAC2_UCNT             0x0100	/*  DAC2 Update Counter */
#define IRQM_UTC1                  0x0200	/*  User TC1 out */
#define IRQM_UTC1_INV              0x0400	/*  User TC1 out, inverted */
#define IRQM_UTC2                  0x0800	/*  User TC2 out */
#define IRQM_DIGITAL_IT            0x1000	/*  Digital Interrupt */
#define IRQM_EXTERNAL_IT           0x2000	/*  External Interrupt */
#define IRQM_ETRIG_RISING          0x4000	/*  External Trigger rising-edge */
#define IRQM_ETRIG_FALLING         0x8000	/*  External Trigger falling-edge */

/*  DMA Request Sources (LAS0) */
#define DMAS_DISABLED              0x0	/*  DMA Disabled */
#define DMAS_ADC_SCNT              0x1	/*  ADC Sample Counter */
#define DMAS_DAC1_UCNT             0x2	/*  D/A1 Update Counter */
#define DMAS_DAC2_UCNT             0x3	/*  D/A2 Update Counter */
#define DMAS_UTC1                  0x4	/*  User TC1 out */
#define DMAS_ADFIFO_HALF_FULL      0x8	/*  A/D FIFO half full */
#define DMAS_DAC1_FIFO_HALF_EMPTY  0x9	/*  D/A1 FIFO half empty */
#define DMAS_DAC2_FIFO_HALF_EMPTY  0xA	/*  D/A2 FIFO half empty */

/*  DMA Local Addresses   (0x40000000+LAS1 offset) */
#define DMALADDR_ADC       0x40000000	/*  A/D FIFO */
#define DMALADDR_HDIN      0x40000004	/*  High Speed Digital Input FIFO */
#define DMALADDR_DAC1      0x40000008	/*  D/A1 FIFO */
#define DMALADDR_DAC2      0x4000000C	/*  D/A2 FIFO */

/*  Port 0 compare modes (SetDIO0CompareMode) */
#define DIO_MODE_EVENT     0	/*  Event Mode */
#define DIO_MODE_MATCH     1	/*  Match Mode */

/*  Digital Table Enable (Port 1 disable) */
#define DTBL_DISABLE       0	/*  Enable Digital Table */
#define DTBL_ENABLE        1	/*  Disable Digital Table */

/*  Sampling Signal for High Speed Digital Input (SetHdinStart) */
#define HDIN_SOFTWARE      0x0	/*  Software Trigger */
#define HDIN_ADC           0x1	/*  A/D Conversion Signal */
#define HDIN_UTC0          0x2	/*  User TC out 0 */
#define HDIN_UTC1          0x3	/*  User TC out 1 */
#define HDIN_UTC2          0x4	/*  User TC out 2 */
#define HDIN_EPCLK         0x5	/*  External Pacer Clock */
#define HDIN_ETRG          0x6	/*  External Trigger */

/*  Channel Gain Table / Channel Gain Latch */
#define CSC_LATCH          0	/*  Channel Gain Latch mode */
#define CSC_CGT            1	/*  Channel Gain Table mode */

/*  Channel Gain Table Pause Enable */
#define CGT_PAUSE_DISABLE  0	/*  Channel Gain Table Pause Disable */
#define CGT_PAUSE_ENABLE   1	/*  Channel Gain Table Pause Enable */

/*  DAC output type/range (p63) */
#define AOUT_UNIP5         0	/*  0..+5 Volt */
#define AOUT_UNIP10        1	/*  0..+10 Volt */
#define AOUT_BIP5          2	/*  -5..+5 Volt */
#define AOUT_BIP10         3	/*  -10..+10 Volt */

/*  Ghannel Gain Table field definitions (p61) */
/*  Gain */
#define GAIN1              0
#define GAIN2              1
#define GAIN4              2
#define GAIN8              3
#define GAIN16             4
#define GAIN32             5
#define GAIN64             6
#define GAIN128            7

/*  Input range/polarity */
#define AIN_BIP5           0	/*  -5..+5 Volt */
#define AIN_BIP10          1	/*  -10..+10 Volt */
#define AIN_UNIP10         2	/*  0..+10 Volt */

/*  non referenced single ended select bit */
#define NRSE_AGND          0	/*  AGND referenced SE input */
#define NRSE_AINS          1	/*  AIN SENSE referenced SE input */

/*  single ended vs differential */
#define GND_SE		0	/*  Single-Ended */
#define GND_DIFF	1	/*  Differential */