| /* |
| * Disk Array driver for HP Smart Array SAS controllers |
| * Copyright 2000, 2009 Hewlett-Packard Development Company, L.P. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Questions/Comments/Bugfixes to iss_storagedev@hp.com |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/fs.h> |
| #include <linux/timer.h> |
| #include <linux/seq_file.h> |
| #include <linux/init.h> |
| #include <linux/spinlock.h> |
| #include <linux/compat.h> |
| #include <linux/blktrace_api.h> |
| #include <linux/uaccess.h> |
| #include <linux/io.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/completion.h> |
| #include <linux/moduleparam.h> |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_tcq.h> |
| #include <linux/cciss_ioctl.h> |
| #include <linux/string.h> |
| #include <linux/bitmap.h> |
| #include <asm/atomic.h> |
| #include <linux/kthread.h> |
| #include "hpsa_cmd.h" |
| #include "hpsa.h" |
| |
| /* HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.' */ |
| #define HPSA_DRIVER_VERSION "2.0.2-1" |
| #define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")" |
| |
| /* How long to wait (in milliseconds) for board to go into simple mode */ |
| #define MAX_CONFIG_WAIT 30000 |
| #define MAX_IOCTL_CONFIG_WAIT 1000 |
| |
| /*define how many times we will try a command because of bus resets */ |
| #define MAX_CMD_RETRIES 3 |
| |
| /* Embedded module documentation macros - see modules.h */ |
| MODULE_AUTHOR("Hewlett-Packard Company"); |
| MODULE_DESCRIPTION("Driver for HP Smart Array Controller version " \ |
| HPSA_DRIVER_VERSION); |
| MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers"); |
| MODULE_VERSION(HPSA_DRIVER_VERSION); |
| MODULE_LICENSE("GPL"); |
| |
| static int hpsa_allow_any; |
| module_param(hpsa_allow_any, int, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(hpsa_allow_any, |
| "Allow hpsa driver to access unknown HP Smart Array hardware"); |
| |
| /* define the PCI info for the cards we can control */ |
| static const struct pci_device_id hpsa_pci_device_id[] = { |
| {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241}, |
| {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243}, |
| {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245}, |
| {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247}, |
| {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249}, |
| {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324a}, |
| {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324b}, |
| {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3233}, |
| {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3250}, |
| {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3251}, |
| {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3252}, |
| {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3253}, |
| {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3254}, |
| {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, |
| PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0}, |
| {0,} |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, hpsa_pci_device_id); |
| |
| /* board_id = Subsystem Device ID & Vendor ID |
| * product = Marketing Name for the board |
| * access = Address of the struct of function pointers |
| */ |
| static struct board_type products[] = { |
| {0x3241103C, "Smart Array P212", &SA5_access}, |
| {0x3243103C, "Smart Array P410", &SA5_access}, |
| {0x3245103C, "Smart Array P410i", &SA5_access}, |
| {0x3247103C, "Smart Array P411", &SA5_access}, |
| {0x3249103C, "Smart Array P812", &SA5_access}, |
| {0x324a103C, "Smart Array P712m", &SA5_access}, |
| {0x324b103C, "Smart Array P711m", &SA5_access}, |
| {0x3250103C, "Smart Array", &SA5_access}, |
| {0x3250113C, "Smart Array", &SA5_access}, |
| {0x3250123C, "Smart Array", &SA5_access}, |
| {0x3250133C, "Smart Array", &SA5_access}, |
| {0x3250143C, "Smart Array", &SA5_access}, |
| {0xFFFF103C, "Unknown Smart Array", &SA5_access}, |
| }; |
| |
| static int number_of_controllers; |
| |
| static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id); |
| static irqreturn_t do_hpsa_intr_msi(int irq, void *dev_id); |
| static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg); |
| static void start_io(struct ctlr_info *h); |
| |
| #ifdef CONFIG_COMPAT |
| static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, void *arg); |
| #endif |
| |
| static void cmd_free(struct ctlr_info *h, struct CommandList *c); |
| static void cmd_special_free(struct ctlr_info *h, struct CommandList *c); |
| static struct CommandList *cmd_alloc(struct ctlr_info *h); |
| static struct CommandList *cmd_special_alloc(struct ctlr_info *h); |
| static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, |
| void *buff, size_t size, u8 page_code, unsigned char *scsi3addr, |
| int cmd_type); |
| |
| static int hpsa_scsi_queue_command(struct Scsi_Host *h, struct scsi_cmnd *cmd); |
| static void hpsa_scan_start(struct Scsi_Host *); |
| static int hpsa_scan_finished(struct Scsi_Host *sh, |
| unsigned long elapsed_time); |
| static int hpsa_change_queue_depth(struct scsi_device *sdev, |
| int qdepth, int reason); |
| |
| static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd); |
| static int hpsa_slave_alloc(struct scsi_device *sdev); |
| static void hpsa_slave_destroy(struct scsi_device *sdev); |
| |
| static ssize_t raid_level_show(struct device *dev, |
| struct device_attribute *attr, char *buf); |
| static ssize_t lunid_show(struct device *dev, |
| struct device_attribute *attr, char *buf); |
| static ssize_t unique_id_show(struct device *dev, |
| struct device_attribute *attr, char *buf); |
| static ssize_t host_show_firmware_revision(struct device *dev, |
| struct device_attribute *attr, char *buf); |
| static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno); |
| static ssize_t host_store_rescan(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count); |
| static int check_for_unit_attention(struct ctlr_info *h, |
| struct CommandList *c); |
| static void check_ioctl_unit_attention(struct ctlr_info *h, |
| struct CommandList *c); |
| /* performant mode helper functions */ |
| static void calc_bucket_map(int *bucket, int num_buckets, |
| int nsgs, int *bucket_map); |
| static __devinit void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h); |
| static inline u32 next_command(struct ctlr_info *h); |
| static int __devinit hpsa_find_cfg_addrs(struct pci_dev *pdev, |
| void __iomem *vaddr, u32 *cfg_base_addr, u64 *cfg_base_addr_index, |
| u64 *cfg_offset); |
| static int __devinit hpsa_pci_find_memory_BAR(struct pci_dev *pdev, |
| unsigned long *memory_bar); |
| static int __devinit hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id); |
| |
| static DEVICE_ATTR(raid_level, S_IRUGO, raid_level_show, NULL); |
| static DEVICE_ATTR(lunid, S_IRUGO, lunid_show, NULL); |
| static DEVICE_ATTR(unique_id, S_IRUGO, unique_id_show, NULL); |
| static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan); |
| static DEVICE_ATTR(firmware_revision, S_IRUGO, |
| host_show_firmware_revision, NULL); |
| |
| static struct device_attribute *hpsa_sdev_attrs[] = { |
| &dev_attr_raid_level, |
| &dev_attr_lunid, |
| &dev_attr_unique_id, |
| NULL, |
| }; |
| |
| static struct device_attribute *hpsa_shost_attrs[] = { |
| &dev_attr_rescan, |
| &dev_attr_firmware_revision, |
| NULL, |
| }; |
| |
| static struct scsi_host_template hpsa_driver_template = { |
| .module = THIS_MODULE, |
| .name = "hpsa", |
| .proc_name = "hpsa", |
| .queuecommand = hpsa_scsi_queue_command, |
| .scan_start = hpsa_scan_start, |
| .scan_finished = hpsa_scan_finished, |
| .change_queue_depth = hpsa_change_queue_depth, |
| .this_id = -1, |
| .use_clustering = ENABLE_CLUSTERING, |
| .eh_device_reset_handler = hpsa_eh_device_reset_handler, |
| .ioctl = hpsa_ioctl, |
| .slave_alloc = hpsa_slave_alloc, |
| .slave_destroy = hpsa_slave_destroy, |
| #ifdef CONFIG_COMPAT |
| .compat_ioctl = hpsa_compat_ioctl, |
| #endif |
| .sdev_attrs = hpsa_sdev_attrs, |
| .shost_attrs = hpsa_shost_attrs, |
| }; |
| |
| static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev) |
| { |
| unsigned long *priv = shost_priv(sdev->host); |
| return (struct ctlr_info *) *priv; |
| } |
| |
| static inline struct ctlr_info *shost_to_hba(struct Scsi_Host *sh) |
| { |
| unsigned long *priv = shost_priv(sh); |
| return (struct ctlr_info *) *priv; |
| } |
| |
| static int check_for_unit_attention(struct ctlr_info *h, |
| struct CommandList *c) |
| { |
| if (c->err_info->SenseInfo[2] != UNIT_ATTENTION) |
| return 0; |
| |
| switch (c->err_info->SenseInfo[12]) { |
| case STATE_CHANGED: |
| dev_warn(&h->pdev->dev, "hpsa%d: a state change " |
| "detected, command retried\n", h->ctlr); |
| break; |
| case LUN_FAILED: |
| dev_warn(&h->pdev->dev, "hpsa%d: LUN failure " |
| "detected, action required\n", h->ctlr); |
| break; |
| case REPORT_LUNS_CHANGED: |
| dev_warn(&h->pdev->dev, "hpsa%d: report LUN data " |
| "changed, action required\n", h->ctlr); |
| /* |
| * Note: this REPORT_LUNS_CHANGED condition only occurs on the MSA2012. |
| */ |
| break; |
| case POWER_OR_RESET: |
| dev_warn(&h->pdev->dev, "hpsa%d: a power on " |
| "or device reset detected\n", h->ctlr); |
| break; |
| case UNIT_ATTENTION_CLEARED: |
| dev_warn(&h->pdev->dev, "hpsa%d: unit attention " |
| "cleared by another initiator\n", h->ctlr); |
| break; |
| default: |
| dev_warn(&h->pdev->dev, "hpsa%d: unknown " |
| "unit attention detected\n", h->ctlr); |
| break; |
| } |
| return 1; |
| } |
| |
| static ssize_t host_store_rescan(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct ctlr_info *h; |
| struct Scsi_Host *shost = class_to_shost(dev); |
| h = shost_to_hba(shost); |
| hpsa_scan_start(h->scsi_host); |
| return count; |
| } |
| |
| static ssize_t host_show_firmware_revision(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ctlr_info *h; |
| struct Scsi_Host *shost = class_to_shost(dev); |
| unsigned char *fwrev; |
| |
| h = shost_to_hba(shost); |
| if (!h->hba_inquiry_data) |
| return 0; |
| fwrev = &h->hba_inquiry_data[32]; |
| return snprintf(buf, 20, "%c%c%c%c\n", |
| fwrev[0], fwrev[1], fwrev[2], fwrev[3]); |
| } |
| |
| /* Enqueuing and dequeuing functions for cmdlists. */ |
| static inline void addQ(struct hlist_head *list, struct CommandList *c) |
| { |
| hlist_add_head(&c->list, list); |
| } |
| |
| static inline u32 next_command(struct ctlr_info *h) |
| { |
| u32 a; |
| |
| if (unlikely(h->transMethod != CFGTBL_Trans_Performant)) |
| return h->access.command_completed(h); |
| |
| if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) { |
| a = *(h->reply_pool_head); /* Next cmd in ring buffer */ |
| (h->reply_pool_head)++; |
| h->commands_outstanding--; |
| } else { |
| a = FIFO_EMPTY; |
| } |
| /* Check for wraparound */ |
| if (h->reply_pool_head == (h->reply_pool + h->max_commands)) { |
| h->reply_pool_head = h->reply_pool; |
| h->reply_pool_wraparound ^= 1; |
| } |
| return a; |
| } |
| |
| /* set_performant_mode: Modify the tag for cciss performant |
| * set bit 0 for pull model, bits 3-1 for block fetch |
| * register number |
| */ |
| static void set_performant_mode(struct ctlr_info *h, struct CommandList *c) |
| { |
| if (likely(h->transMethod == CFGTBL_Trans_Performant)) |
| c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1); |
| } |
| |
| static void enqueue_cmd_and_start_io(struct ctlr_info *h, |
| struct CommandList *c) |
| { |
| unsigned long flags; |
| |
| set_performant_mode(h, c); |
| spin_lock_irqsave(&h->lock, flags); |
| addQ(&h->reqQ, c); |
| h->Qdepth++; |
| start_io(h); |
| spin_unlock_irqrestore(&h->lock, flags); |
| } |
| |
| static inline void removeQ(struct CommandList *c) |
| { |
| if (WARN_ON(hlist_unhashed(&c->list))) |
| return; |
| hlist_del_init(&c->list); |
| } |
| |
| static inline int is_hba_lunid(unsigned char scsi3addr[]) |
| { |
| return memcmp(scsi3addr, RAID_CTLR_LUNID, 8) == 0; |
| } |
| |
| static inline int is_logical_dev_addr_mode(unsigned char scsi3addr[]) |
| { |
| return (scsi3addr[3] & 0xC0) == 0x40; |
| } |
| |
| static inline int is_scsi_rev_5(struct ctlr_info *h) |
| { |
| if (!h->hba_inquiry_data) |
| return 0; |
| if ((h->hba_inquiry_data[2] & 0x07) == 5) |
| return 1; |
| return 0; |
| } |
| |
| static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG", |
| "UNKNOWN" |
| }; |
| #define RAID_UNKNOWN (ARRAY_SIZE(raid_label) - 1) |
| |
| static ssize_t raid_level_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| ssize_t l = 0; |
| unsigned char rlevel; |
| struct ctlr_info *h; |
| struct scsi_device *sdev; |
| struct hpsa_scsi_dev_t *hdev; |
| unsigned long flags; |
| |
| sdev = to_scsi_device(dev); |
| h = sdev_to_hba(sdev); |
| spin_lock_irqsave(&h->lock, flags); |
| hdev = sdev->hostdata; |
| if (!hdev) { |
| spin_unlock_irqrestore(&h->lock, flags); |
| return -ENODEV; |
| } |
| |
| /* Is this even a logical drive? */ |
| if (!is_logical_dev_addr_mode(hdev->scsi3addr)) { |
| spin_unlock_irqrestore(&h->lock, flags); |
| l = snprintf(buf, PAGE_SIZE, "N/A\n"); |
| return l; |
| } |
| |
| rlevel = hdev->raid_level; |
| spin_unlock_irqrestore(&h->lock, flags); |
| if (rlevel > RAID_UNKNOWN) |
| rlevel = RAID_UNKNOWN; |
| l = snprintf(buf, PAGE_SIZE, "RAID %s\n", raid_label[rlevel]); |
| return l; |
| } |
| |
| static ssize_t lunid_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ctlr_info *h; |
| struct scsi_device *sdev; |
| struct hpsa_scsi_dev_t *hdev; |
| unsigned long flags; |
| unsigned char lunid[8]; |
| |
| sdev = to_scsi_device(dev); |
| h = sdev_to_hba(sdev); |
| spin_lock_irqsave(&h->lock, flags); |
| hdev = sdev->hostdata; |
| if (!hdev) { |
| spin_unlock_irqrestore(&h->lock, flags); |
| return -ENODEV; |
| } |
| memcpy(lunid, hdev->scsi3addr, sizeof(lunid)); |
| spin_unlock_irqrestore(&h->lock, flags); |
| return snprintf(buf, 20, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n", |
| lunid[0], lunid[1], lunid[2], lunid[3], |
| lunid[4], lunid[5], lunid[6], lunid[7]); |
| } |
| |
| static ssize_t unique_id_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ctlr_info *h; |
| struct scsi_device *sdev; |
| struct hpsa_scsi_dev_t *hdev; |
| unsigned long flags; |
| unsigned char sn[16]; |
| |
| sdev = to_scsi_device(dev); |
| h = sdev_to_hba(sdev); |
| spin_lock_irqsave(&h->lock, flags); |
| hdev = sdev->hostdata; |
| if (!hdev) { |
| spin_unlock_irqrestore(&h->lock, flags); |
| return -ENODEV; |
| } |
| memcpy(sn, hdev->device_id, sizeof(sn)); |
| spin_unlock_irqrestore(&h->lock, flags); |
| return snprintf(buf, 16 * 2 + 2, |
| "%02X%02X%02X%02X%02X%02X%02X%02X" |
| "%02X%02X%02X%02X%02X%02X%02X%02X\n", |
| sn[0], sn[1], sn[2], sn[3], |
| sn[4], sn[5], sn[6], sn[7], |
| sn[8], sn[9], sn[10], sn[11], |
| sn[12], sn[13], sn[14], sn[15]); |
| } |
| |
| static int hpsa_find_target_lun(struct ctlr_info *h, |
| unsigned char scsi3addr[], int bus, int *target, int *lun) |
| { |
| /* finds an unused bus, target, lun for a new physical device |
| * assumes h->devlock is held |
| */ |
| int i, found = 0; |
| DECLARE_BITMAP(lun_taken, HPSA_MAX_SCSI_DEVS_PER_HBA); |
| |
| memset(&lun_taken[0], 0, HPSA_MAX_SCSI_DEVS_PER_HBA >> 3); |
| |
| for (i = 0; i < h->ndevices; i++) { |
| if (h->dev[i]->bus == bus && h->dev[i]->target != -1) |
| set_bit(h->dev[i]->target, lun_taken); |
| } |
| |
| for (i = 0; i < HPSA_MAX_SCSI_DEVS_PER_HBA; i++) { |
| if (!test_bit(i, lun_taken)) { |
| /* *bus = 1; */ |
| *target = i; |
| *lun = 0; |
| found = 1; |
| break; |
| } |
| } |
| return !found; |
| } |
| |
| /* Add an entry into h->dev[] array. */ |
| static int hpsa_scsi_add_entry(struct ctlr_info *h, int hostno, |
| struct hpsa_scsi_dev_t *device, |
| struct hpsa_scsi_dev_t *added[], int *nadded) |
| { |
| /* assumes h->devlock is held */ |
| int n = h->ndevices; |
| int i; |
| unsigned char addr1[8], addr2[8]; |
| struct hpsa_scsi_dev_t *sd; |
| |
| if (n >= HPSA_MAX_SCSI_DEVS_PER_HBA) { |
| dev_err(&h->pdev->dev, "too many devices, some will be " |
| "inaccessible.\n"); |
| return -1; |
| } |
| |
| /* physical devices do not have lun or target assigned until now. */ |
| if (device->lun != -1) |
| /* Logical device, lun is already assigned. */ |
| goto lun_assigned; |
| |
| /* If this device a non-zero lun of a multi-lun device |
| * byte 4 of the 8-byte LUN addr will contain the logical |
| * unit no, zero otherise. |
| */ |
| if (device->scsi3addr[4] == 0) { |
| /* This is not a non-zero lun of a multi-lun device */ |
| if (hpsa_find_target_lun(h, device->scsi3addr, |
| device->bus, &device->target, &device->lun) != 0) |
| return -1; |
| goto lun_assigned; |
| } |
| |
| /* This is a non-zero lun of a multi-lun device. |
| * Search through our list and find the device which |
| * has the same 8 byte LUN address, excepting byte 4. |
| * Assign the same bus and target for this new LUN. |
| * Use the logical unit number from the firmware. |
| */ |
| memcpy(addr1, device->scsi3addr, 8); |
| addr1[4] = 0; |
| for (i = 0; i < n; i++) { |
| sd = h->dev[i]; |
| memcpy(addr2, sd->scsi3addr, 8); |
| addr2[4] = 0; |
| /* differ only in byte 4? */ |
| if (memcmp(addr1, addr2, 8) == 0) { |
| device->bus = sd->bus; |
| device->target = sd->target; |
| device->lun = device->scsi3addr[4]; |
| break; |
| } |
| } |
| if (device->lun == -1) { |
| dev_warn(&h->pdev->dev, "physical device with no LUN=0," |
| " suspect firmware bug or unsupported hardware " |
| "configuration.\n"); |
| return -1; |
| } |
| |
| lun_assigned: |
| |
| h->dev[n] = device; |
| h->ndevices++; |
| added[*nadded] = device; |
| (*nadded)++; |
| |
| /* initially, (before registering with scsi layer) we don't |
| * know our hostno and we don't want to print anything first |
| * time anyway (the scsi layer's inquiries will show that info) |
| */ |
| /* if (hostno != -1) */ |
| dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d added.\n", |
| scsi_device_type(device->devtype), hostno, |
| device->bus, device->target, device->lun); |
| return 0; |
| } |
| |
| /* Replace an entry from h->dev[] array. */ |
| static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno, |
| int entry, struct hpsa_scsi_dev_t *new_entry, |
| struct hpsa_scsi_dev_t *added[], int *nadded, |
| struct hpsa_scsi_dev_t *removed[], int *nremoved) |
| { |
| /* assumes h->devlock is held */ |
| BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA); |
| removed[*nremoved] = h->dev[entry]; |
| (*nremoved)++; |
| h->dev[entry] = new_entry; |
| added[*nadded] = new_entry; |
| (*nadded)++; |
| dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d changed.\n", |
| scsi_device_type(new_entry->devtype), hostno, new_entry->bus, |
| new_entry->target, new_entry->lun); |
| } |
| |
| /* Remove an entry from h->dev[] array. */ |
| static void hpsa_scsi_remove_entry(struct ctlr_info *h, int hostno, int entry, |
| struct hpsa_scsi_dev_t *removed[], int *nremoved) |
| { |
| /* assumes h->devlock is held */ |
| int i; |
| struct hpsa_scsi_dev_t *sd; |
| |
| BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA); |
| |
| sd = h->dev[entry]; |
| removed[*nremoved] = h->dev[entry]; |
| (*nremoved)++; |
| |
| for (i = entry; i < h->ndevices-1; i++) |
| h->dev[i] = h->dev[i+1]; |
| h->ndevices--; |
| dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d removed.\n", |
| scsi_device_type(sd->devtype), hostno, sd->bus, sd->target, |
| sd->lun); |
| } |
| |
| #define SCSI3ADDR_EQ(a, b) ( \ |
| (a)[7] == (b)[7] && \ |
| (a)[6] == (b)[6] && \ |
| (a)[5] == (b)[5] && \ |
| (a)[4] == (b)[4] && \ |
| (a)[3] == (b)[3] && \ |
| (a)[2] == (b)[2] && \ |
| (a)[1] == (b)[1] && \ |
| (a)[0] == (b)[0]) |
| |
| static void fixup_botched_add(struct ctlr_info *h, |
| struct hpsa_scsi_dev_t *added) |
| { |
| /* called when scsi_add_device fails in order to re-adjust |
| * h->dev[] to match the mid layer's view. |
| */ |
| unsigned long flags; |
| int i, j; |
| |
| spin_lock_irqsave(&h->lock, flags); |
| for (i = 0; i < h->ndevices; i++) { |
| if (h->dev[i] == added) { |
| for (j = i; j < h->ndevices-1; j++) |
| h->dev[j] = h->dev[j+1]; |
| h->ndevices--; |
| break; |
| } |
| } |
| spin_unlock_irqrestore(&h->lock, flags); |
| kfree(added); |
| } |
| |
| static inline int device_is_the_same(struct hpsa_scsi_dev_t *dev1, |
| struct hpsa_scsi_dev_t *dev2) |
| { |
| if ((is_logical_dev_addr_mode(dev1->scsi3addr) || |
| (dev1->lun != -1 && dev2->lun != -1)) && |
| dev1->devtype != 0x0C) |
| return (memcmp(dev1, dev2, sizeof(*dev1)) == 0); |
| |
| /* we compare everything except lun and target as these |
| * are not yet assigned. Compare parts likely |
| * to differ first |
| */ |
| if (memcmp(dev1->scsi3addr, dev2->scsi3addr, |
| sizeof(dev1->scsi3addr)) != 0) |
| return 0; |
| if (memcmp(dev1->device_id, dev2->device_id, |
| sizeof(dev1->device_id)) != 0) |
| return 0; |
| if (memcmp(dev1->model, dev2->model, sizeof(dev1->model)) != 0) |
| return 0; |
| if (memcmp(dev1->vendor, dev2->vendor, sizeof(dev1->vendor)) != 0) |
| return 0; |
| if (memcmp(dev1->revision, dev2->revision, sizeof(dev1->revision)) != 0) |
| return 0; |
| if (dev1->devtype != dev2->devtype) |
| return 0; |
| if (dev1->raid_level != dev2->raid_level) |
| return 0; |
| if (dev1->bus != dev2->bus) |
| return 0; |
| return 1; |
| } |
| |
| /* Find needle in haystack. If exact match found, return DEVICE_SAME, |
| * and return needle location in *index. If scsi3addr matches, but not |
| * vendor, model, serial num, etc. return DEVICE_CHANGED, and return needle |
| * location in *index. If needle not found, return DEVICE_NOT_FOUND. |
| */ |
| static int hpsa_scsi_find_entry(struct hpsa_scsi_dev_t *needle, |
| struct hpsa_scsi_dev_t *haystack[], int haystack_size, |
| int *index) |
| { |
| int i; |
| #define DEVICE_NOT_FOUND 0 |
| #define DEVICE_CHANGED 1 |
| #define DEVICE_SAME 2 |
| for (i = 0; i < haystack_size; i++) { |
| if (haystack[i] == NULL) /* previously removed. */ |
| continue; |
| if (SCSI3ADDR_EQ(needle->scsi3addr, haystack[i]->scsi3addr)) { |
| *index = i; |
| if (device_is_the_same(needle, haystack[i])) |
| return DEVICE_SAME; |
| else |
| return DEVICE_CHANGED; |
| } |
| } |
| *index = -1; |
| return DEVICE_NOT_FOUND; |
| } |
| |
| static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno, |
| struct hpsa_scsi_dev_t *sd[], int nsds) |
| { |
| /* sd contains scsi3 addresses and devtypes, and inquiry |
| * data. This function takes what's in sd to be the current |
| * reality and updates h->dev[] to reflect that reality. |
| */ |
| int i, entry, device_change, changes = 0; |
| struct hpsa_scsi_dev_t *csd; |
| unsigned long flags; |
| struct hpsa_scsi_dev_t **added, **removed; |
| int nadded, nremoved; |
| struct Scsi_Host *sh = NULL; |
| |
| added = kzalloc(sizeof(*added) * HPSA_MAX_SCSI_DEVS_PER_HBA, |
| GFP_KERNEL); |
| removed = kzalloc(sizeof(*removed) * HPSA_MAX_SCSI_DEVS_PER_HBA, |
| GFP_KERNEL); |
| |
| if (!added || !removed) { |
| dev_warn(&h->pdev->dev, "out of memory in " |
| "adjust_hpsa_scsi_table\n"); |
| goto free_and_out; |
| } |
| |
| spin_lock_irqsave(&h->devlock, flags); |
| |
| /* find any devices in h->dev[] that are not in |
| * sd[] and remove them from h->dev[], and for any |
| * devices which have changed, remove the old device |
| * info and add the new device info. |
| */ |
| i = 0; |
| nremoved = 0; |
| nadded = 0; |
| while (i < h->ndevices) { |
| csd = h->dev[i]; |
| device_change = hpsa_scsi_find_entry(csd, sd, nsds, &entry); |
| if (device_change == DEVICE_NOT_FOUND) { |
| changes++; |
| hpsa_scsi_remove_entry(h, hostno, i, |
| removed, &nremoved); |
| continue; /* remove ^^^, hence i not incremented */ |
| } else if (device_change == DEVICE_CHANGED) { |
| changes++; |
| hpsa_scsi_replace_entry(h, hostno, i, sd[entry], |
| added, &nadded, removed, &nremoved); |
| /* Set it to NULL to prevent it from being freed |
| * at the bottom of hpsa_update_scsi_devices() |
| */ |
| sd[entry] = NULL; |
| } |
| i++; |
| } |
| |
| /* Now, make sure every device listed in sd[] is also |
| * listed in h->dev[], adding them if they aren't found |
| */ |
| |
| for (i = 0; i < nsds; i++) { |
| if (!sd[i]) /* if already added above. */ |
| continue; |
| device_change = hpsa_scsi_find_entry(sd[i], h->dev, |
| h->ndevices, &entry); |
| if (device_change == DEVICE_NOT_FOUND) { |
| changes++; |
| if (hpsa_scsi_add_entry(h, hostno, sd[i], |
| added, &nadded) != 0) |
| break; |
| sd[i] = NULL; /* prevent from being freed later. */ |
| } else if (device_change == DEVICE_CHANGED) { |
| /* should never happen... */ |
| changes++; |
| dev_warn(&h->pdev->dev, |
| "device unexpectedly changed.\n"); |
| /* but if it does happen, we just ignore that device */ |
| } |
| } |
| spin_unlock_irqrestore(&h->devlock, flags); |
| |
| /* Don't notify scsi mid layer of any changes the first time through |
| * (or if there are no changes) scsi_scan_host will do it later the |
| * first time through. |
| */ |
| if (hostno == -1 || !changes) |
| goto free_and_out; |
| |
| sh = h->scsi_host; |
| /* Notify scsi mid layer of any removed devices */ |
| for (i = 0; i < nremoved; i++) { |
| struct scsi_device *sdev = |
| scsi_device_lookup(sh, removed[i]->bus, |
| removed[i]->target, removed[i]->lun); |
| if (sdev != NULL) { |
| scsi_remove_device(sdev); |
| scsi_device_put(sdev); |
| } else { |
| /* We don't expect to get here. |
| * future cmds to this device will get selection |
| * timeout as if the device was gone. |
| */ |
| dev_warn(&h->pdev->dev, "didn't find c%db%dt%dl%d " |
| " for removal.", hostno, removed[i]->bus, |
| removed[i]->target, removed[i]->lun); |
| } |
| kfree(removed[i]); |
| removed[i] = NULL; |
| } |
| |
| /* Notify scsi mid layer of any added devices */ |
| for (i = 0; i < nadded; i++) { |
| if (scsi_add_device(sh, added[i]->bus, |
| added[i]->target, added[i]->lun) == 0) |
| continue; |
| dev_warn(&h->pdev->dev, "scsi_add_device c%db%dt%dl%d failed, " |
| "device not added.\n", hostno, added[i]->bus, |
| added[i]->target, added[i]->lun); |
| /* now we have to remove it from h->dev, |
| * since it didn't get added to scsi mid layer |
| */ |
| fixup_botched_add(h, added[i]); |
| } |
| |
| free_and_out: |
| kfree(added); |
| kfree(removed); |
| } |
| |
| /* |
| * Lookup bus/target/lun and retrun corresponding struct hpsa_scsi_dev_t * |
| * Assume's h->devlock is held. |
| */ |
| static struct hpsa_scsi_dev_t *lookup_hpsa_scsi_dev(struct ctlr_info *h, |
| int bus, int target, int lun) |
| { |
| int i; |
| struct hpsa_scsi_dev_t *sd; |
| |
| for (i = 0; i < h->ndevices; i++) { |
| sd = h->dev[i]; |
| if (sd->bus == bus && sd->target == target && sd->lun == lun) |
| return sd; |
| } |
| return NULL; |
| } |
| |
| /* link sdev->hostdata to our per-device structure. */ |
| static int hpsa_slave_alloc(struct scsi_device *sdev) |
| { |
| struct hpsa_scsi_dev_t *sd; |
| unsigned long flags; |
| struct ctlr_info *h; |
| |
| h = sdev_to_hba(sdev); |
| spin_lock_irqsave(&h->devlock, flags); |
| sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev), |
| sdev_id(sdev), sdev->lun); |
| if (sd != NULL) |
| sdev->hostdata = sd; |
| spin_unlock_irqrestore(&h->devlock, flags); |
| return 0; |
| } |
| |
| static void hpsa_slave_destroy(struct scsi_device *sdev) |
| { |
| /* nothing to do. */ |
| } |
| |
| static void hpsa_scsi_setup(struct ctlr_info *h) |
| { |
| h->ndevices = 0; |
| h->scsi_host = NULL; |
| spin_lock_init(&h->devlock); |
| } |
| |
| static void hpsa_free_sg_chain_blocks(struct ctlr_info *h) |
| { |
| int i; |
| |
| if (!h->cmd_sg_list) |
| return; |
| for (i = 0; i < h->nr_cmds; i++) { |
| kfree(h->cmd_sg_list[i]); |
| h->cmd_sg_list[i] = NULL; |
| } |
| kfree(h->cmd_sg_list); |
| h->cmd_sg_list = NULL; |
| } |
| |
| static int hpsa_allocate_sg_chain_blocks(struct ctlr_info *h) |
| { |
| int i; |
| |
| if (h->chainsize <= 0) |
| return 0; |
| |
| h->cmd_sg_list = kzalloc(sizeof(*h->cmd_sg_list) * h->nr_cmds, |
| GFP_KERNEL); |
| if (!h->cmd_sg_list) |
| return -ENOMEM; |
| for (i = 0; i < h->nr_cmds; i++) { |
| h->cmd_sg_list[i] = kmalloc(sizeof(*h->cmd_sg_list[i]) * |
| h->chainsize, GFP_KERNEL); |
| if (!h->cmd_sg_list[i]) |
| goto clean; |
| } |
| return 0; |
| |
| clean: |
| hpsa_free_sg_chain_blocks(h); |
| return -ENOMEM; |
| } |
| |
| static void hpsa_map_sg_chain_block(struct ctlr_info *h, |
| struct CommandList *c) |
| { |
| struct SGDescriptor *chain_sg, *chain_block; |
| u64 temp64; |
| |
| chain_sg = &c->SG[h->max_cmd_sg_entries - 1]; |
| chain_block = h->cmd_sg_list[c->cmdindex]; |
| chain_sg->Ext = HPSA_SG_CHAIN; |
| chain_sg->Len = sizeof(*chain_sg) * |
| (c->Header.SGTotal - h->max_cmd_sg_entries); |
| temp64 = pci_map_single(h->pdev, chain_block, chain_sg->Len, |
| PCI_DMA_TODEVICE); |
| chain_sg->Addr.lower = (u32) (temp64 & 0x0FFFFFFFFULL); |
| chain_sg->Addr.upper = (u32) ((temp64 >> 32) & 0x0FFFFFFFFULL); |
| } |
| |
| static void hpsa_unmap_sg_chain_block(struct ctlr_info *h, |
| struct CommandList *c) |
| { |
| struct SGDescriptor *chain_sg; |
| union u64bit temp64; |
| |
| if (c->Header.SGTotal <= h->max_cmd_sg_entries) |
| return; |
| |
| chain_sg = &c->SG[h->max_cmd_sg_entries - 1]; |
| temp64.val32.lower = chain_sg->Addr.lower; |
| temp64.val32.upper = chain_sg->Addr.upper; |
| pci_unmap_single(h->pdev, temp64.val, chain_sg->Len, PCI_DMA_TODEVICE); |
| } |
| |
| static void complete_scsi_command(struct CommandList *cp, |
| int timeout, u32 tag) |
| { |
| struct scsi_cmnd *cmd; |
| struct ctlr_info *h; |
| struct ErrorInfo *ei; |
| |
| unsigned char sense_key; |
| unsigned char asc; /* additional sense code */ |
| unsigned char ascq; /* additional sense code qualifier */ |
| |
| ei = cp->err_info; |
| cmd = (struct scsi_cmnd *) cp->scsi_cmd; |
| h = cp->h; |
| |
| scsi_dma_unmap(cmd); /* undo the DMA mappings */ |
| if (cp->Header.SGTotal > h->max_cmd_sg_entries) |
| hpsa_unmap_sg_chain_block(h, cp); |
| |
| cmd->result = (DID_OK << 16); /* host byte */ |
| cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */ |
| cmd->result |= ei->ScsiStatus; |
| |
| /* copy the sense data whether we need to or not. */ |
| memcpy(cmd->sense_buffer, ei->SenseInfo, |
| ei->SenseLen > SCSI_SENSE_BUFFERSIZE ? |
| SCSI_SENSE_BUFFERSIZE : |
| ei->SenseLen); |
| scsi_set_resid(cmd, ei->ResidualCnt); |
| |
| if (ei->CommandStatus == 0) { |
| cmd->scsi_done(cmd); |
| cmd_free(h, cp); |
| return; |
| } |
| |
| /* an error has occurred */ |
| switch (ei->CommandStatus) { |
| |
| case CMD_TARGET_STATUS: |
| if (ei->ScsiStatus) { |
| /* Get sense key */ |
| sense_key = 0xf & ei->SenseInfo[2]; |
| /* Get additional sense code */ |
| asc = ei->SenseInfo[12]; |
| /* Get addition sense code qualifier */ |
| ascq = ei->SenseInfo[13]; |
| } |
| |
| if (ei->ScsiStatus == SAM_STAT_CHECK_CONDITION) { |
| if (check_for_unit_attention(h, cp)) { |
| cmd->result = DID_SOFT_ERROR << 16; |
| break; |
| } |
| if (sense_key == ILLEGAL_REQUEST) { |
| /* |
| * SCSI REPORT_LUNS is commonly unsupported on |
| * Smart Array. Suppress noisy complaint. |
| */ |
| if (cp->Request.CDB[0] == REPORT_LUNS) |
| break; |
| |
| /* If ASC/ASCQ indicate Logical Unit |
| * Not Supported condition, |
| */ |
| if ((asc == 0x25) && (ascq == 0x0)) { |
| dev_warn(&h->pdev->dev, "cp %p " |
| "has check condition\n", cp); |
| break; |
| } |
| } |
| |
| if (sense_key == NOT_READY) { |
| /* If Sense is Not Ready, Logical Unit |
| * Not ready, Manual Intervention |
| * required |
| */ |
| if ((asc == 0x04) && (ascq == 0x03)) { |
| dev_warn(&h->pdev->dev, "cp %p " |
| "has check condition: unit " |
| "not ready, manual " |
| "intervention required\n", cp); |
| break; |
| } |
| } |
| if (sense_key == ABORTED_COMMAND) { |
| /* Aborted command is retryable */ |
| dev_warn(&h->pdev->dev, "cp %p " |
| "has check condition: aborted command: " |
| "ASC: 0x%x, ASCQ: 0x%x\n", |
| cp, asc, ascq); |
| cmd->result = DID_SOFT_ERROR << 16; |
| break; |
| } |
| /* Must be some other type of check condition */ |
| dev_warn(&h->pdev->dev, "cp %p has check condition: " |
| "unknown type: " |
| "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, " |
| "Returning result: 0x%x, " |
| "cmd=[%02x %02x %02x %02x %02x " |
| "%02x %02x %02x %02x %02x %02x " |
| "%02x %02x %02x %02x %02x]\n", |
| cp, sense_key, asc, ascq, |
| cmd->result, |
| cmd->cmnd[0], cmd->cmnd[1], |
| cmd->cmnd[2], cmd->cmnd[3], |
| cmd->cmnd[4], cmd->cmnd[5], |
| cmd->cmnd[6], cmd->cmnd[7], |
| cmd->cmnd[8], cmd->cmnd[9], |
| cmd->cmnd[10], cmd->cmnd[11], |
| cmd->cmnd[12], cmd->cmnd[13], |
| cmd->cmnd[14], cmd->cmnd[15]); |
| break; |
| } |
| |
| |
| /* Problem was not a check condition |
| * Pass it up to the upper layers... |
| */ |
| if (ei->ScsiStatus) { |
| dev_warn(&h->pdev->dev, "cp %p has status 0x%x " |
| "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, " |
| "Returning result: 0x%x\n", |
| cp, ei->ScsiStatus, |
| sense_key, asc, ascq, |
| cmd->result); |
| } else { /* scsi status is zero??? How??? */ |
| dev_warn(&h->pdev->dev, "cp %p SCSI status was 0. " |
| "Returning no connection.\n", cp), |
| |
| /* Ordinarily, this case should never happen, |
| * but there is a bug in some released firmware |
| * revisions that allows it to happen if, for |
| * example, a 4100 backplane loses power and |
| * the tape drive is in it. We assume that |
| * it's a fatal error of some kind because we |
| * can't show that it wasn't. We will make it |
| * look like selection timeout since that is |
| * the most common reason for this to occur, |
| * and it's severe enough. |
| */ |
| |
| cmd->result = DID_NO_CONNECT << 16; |
| } |
| break; |
| |
| case CMD_DATA_UNDERRUN: /* let mid layer handle it. */ |
| break; |
| case CMD_DATA_OVERRUN: |
| dev_warn(&h->pdev->dev, "cp %p has" |
| " completed with data overrun " |
| "reported\n", cp); |
| break; |
| case CMD_INVALID: { |
| /* print_bytes(cp, sizeof(*cp), 1, 0); |
| print_cmd(cp); */ |
| /* We get CMD_INVALID if you address a non-existent device |
| * instead of a selection timeout (no response). You will |
| * see this if you yank out a drive, then try to access it. |
| * This is kind of a shame because it means that any other |
| * CMD_INVALID (e.g. driver bug) will get interpreted as a |
| * missing target. */ |
| cmd->result = DID_NO_CONNECT << 16; |
| } |
| break; |
| case CMD_PROTOCOL_ERR: |
| dev_warn(&h->pdev->dev, "cp %p has " |
| "protocol error \n", cp); |
| break; |
| case CMD_HARDWARE_ERR: |
| cmd->result = DID_ERROR << 16; |
| dev_warn(&h->pdev->dev, "cp %p had hardware error\n", cp); |
| break; |
| case CMD_CONNECTION_LOST: |
| cmd->result = DID_ERROR << 16; |
| dev_warn(&h->pdev->dev, "cp %p had connection lost\n", cp); |
| break; |
| case CMD_ABORTED: |
| cmd->result = DID_ABORT << 16; |
| dev_warn(&h->pdev->dev, "cp %p was aborted with status 0x%x\n", |
| cp, ei->ScsiStatus); |
| break; |
| case CMD_ABORT_FAILED: |
| cmd->result = DID_ERROR << 16; |
| dev_warn(&h->pdev->dev, "cp %p reports abort failed\n", cp); |
| break; |
| case CMD_UNSOLICITED_ABORT: |
| cmd->result = DID_RESET << 16; |
| dev_warn(&h->pdev->dev, "cp %p aborted do to an unsolicited " |
| "abort\n", cp); |
| break; |
| case CMD_TIMEOUT: |
| cmd->result = DID_TIME_OUT << 16; |
| dev_warn(&h->pdev->dev, "cp %p timedout\n", cp); |
| break; |
| default: |
| cmd->result = DID_ERROR << 16; |
| dev_warn(&h->pdev->dev, "cp %p returned unknown status %x\n", |
| cp, ei->CommandStatus); |
| } |
| cmd->scsi_done(cmd); |
| cmd_free(h, cp); |
| } |
| |
| static int hpsa_scsi_detect(struct ctlr_info *h) |
| { |
| struct Scsi_Host *sh; |
| int error; |
| |
| sh = scsi_host_alloc(&hpsa_driver_template, sizeof(h)); |
| if (sh == NULL) |
| goto fail; |
| |
| sh->io_port = 0; |
| sh->n_io_port = 0; |
| sh->this_id = -1; |
| sh->max_channel = 3; |
| sh->max_cmd_len = MAX_COMMAND_SIZE; |
| sh->max_lun = HPSA_MAX_LUN; |
| sh->max_id = HPSA_MAX_LUN; |
| sh->can_queue = h->nr_cmds; |
| sh->cmd_per_lun = h->nr_cmds; |
| sh->sg_tablesize = h->maxsgentries; |
| h->scsi_host = sh; |
| sh->hostdata[0] = (unsigned long) h; |
| sh->irq = h->intr[PERF_MODE_INT]; |
| sh->unique_id = sh->irq; |
| error = scsi_add_host(sh, &h->pdev->dev); |
| if (error) |
| goto fail_host_put; |
| scsi_scan_host(sh); |
| return 0; |
| |
| fail_host_put: |
| dev_err(&h->pdev->dev, "hpsa_scsi_detect: scsi_add_host" |
| " failed for controller %d\n", h->ctlr); |
| scsi_host_put(sh); |
| return error; |
| fail: |
| dev_err(&h->pdev->dev, "hpsa_scsi_detect: scsi_host_alloc" |
| " failed for controller %d\n", h->ctlr); |
| return -ENOMEM; |
| } |
| |
| static void hpsa_pci_unmap(struct pci_dev *pdev, |
| struct CommandList *c, int sg_used, int data_direction) |
| { |
| int i; |
| union u64bit addr64; |
| |
| for (i = 0; i < sg_used; i++) { |
| addr64.val32.lower = c->SG[i].Addr.lower; |
| addr64.val32.upper = c->SG[i].Addr.upper; |
| pci_unmap_single(pdev, (dma_addr_t) addr64.val, c->SG[i].Len, |
| data_direction); |
| } |
| } |
| |
| static void hpsa_map_one(struct pci_dev *pdev, |
| struct CommandList *cp, |
| unsigned char *buf, |
| size_t buflen, |
| int data_direction) |
| { |
| u64 addr64; |
| |
| if (buflen == 0 || data_direction == PCI_DMA_NONE) { |
| cp->Header.SGList = 0; |
| cp->Header.SGTotal = 0; |
| return; |
| } |
| |
| addr64 = (u64) pci_map_single(pdev, buf, buflen, data_direction); |
| cp->SG[0].Addr.lower = |
| (u32) (addr64 & (u64) 0x00000000FFFFFFFF); |
| cp->SG[0].Addr.upper = |
| (u32) ((addr64 >> 32) & (u64) 0x00000000FFFFFFFF); |
| cp->SG[0].Len = buflen; |
| cp->Header.SGList = (u8) 1; /* no. SGs contig in this cmd */ |
| cp->Header.SGTotal = (u16) 1; /* total sgs in this cmd list */ |
| } |
| |
| static inline void hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h, |
| struct CommandList *c) |
| { |
| DECLARE_COMPLETION_ONSTACK(wait); |
| |
| c->waiting = &wait; |
| enqueue_cmd_and_start_io(h, c); |
| wait_for_completion(&wait); |
| } |
| |
| static void hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h, |
| struct CommandList *c, int data_direction) |
| { |
| int retry_count = 0; |
| |
| do { |
| memset(c->err_info, 0, sizeof(c->err_info)); |
| hpsa_scsi_do_simple_cmd_core(h, c); |
| retry_count++; |
| } while (check_for_unit_attention(h, c) && retry_count <= 3); |
| hpsa_pci_unmap(h->pdev, c, 1, data_direction); |
| } |
| |
| static void hpsa_scsi_interpret_error(struct CommandList *cp) |
| { |
| struct ErrorInfo *ei; |
| struct device *d = &cp->h->pdev->dev; |
| |
| ei = cp->err_info; |
| switch (ei->CommandStatus) { |
| case CMD_TARGET_STATUS: |
| dev_warn(d, "cmd %p has completed with errors\n", cp); |
| dev_warn(d, "cmd %p has SCSI Status = %x\n", cp, |
| ei->ScsiStatus); |
| if (ei->ScsiStatus == 0) |
| dev_warn(d, "SCSI status is abnormally zero. " |
| "(probably indicates selection timeout " |
| "reported incorrectly due to a known " |
| "firmware bug, circa July, 2001.)\n"); |
| break; |
| case CMD_DATA_UNDERRUN: /* let mid layer handle it. */ |
| dev_info(d, "UNDERRUN\n"); |
| break; |
| case CMD_DATA_OVERRUN: |
| dev_warn(d, "cp %p has completed with data overrun\n", cp); |
| break; |
| case CMD_INVALID: { |
| /* controller unfortunately reports SCSI passthru's |
| * to non-existent targets as invalid commands. |
| */ |
| dev_warn(d, "cp %p is reported invalid (probably means " |
| "target device no longer present)\n", cp); |
| /* print_bytes((unsigned char *) cp, sizeof(*cp), 1, 0); |
| print_cmd(cp); */ |
| } |
| break; |
| case CMD_PROTOCOL_ERR: |
| dev_warn(d, "cp %p has protocol error \n", cp); |
| break; |
| case CMD_HARDWARE_ERR: |
| /* cmd->result = DID_ERROR << 16; */ |
| dev_warn(d, "cp %p had hardware error\n", cp); |
| break; |
| case CMD_CONNECTION_LOST: |
| dev_warn(d, "cp %p had connection lost\n", cp); |
| break; |
| case CMD_ABORTED: |
| dev_warn(d, "cp %p was aborted\n", cp); |
| break; |
| case CMD_ABORT_FAILED: |
| dev_warn(d, "cp %p reports abort failed\n", cp); |
| break; |
| case CMD_UNSOLICITED_ABORT: |
| dev_warn(d, "cp %p aborted due to an unsolicited abort\n", cp); |
| break; |
| case CMD_TIMEOUT: |
| dev_warn(d, "cp %p timed out\n", cp); |
| break; |
| default: |
| dev_warn(d, "cp %p returned unknown status %x\n", cp, |
| ei->CommandStatus); |
| } |
| } |
| |
| static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr, |
| unsigned char page, unsigned char *buf, |
| unsigned char bufsize) |
| { |
| int rc = IO_OK; |
| struct CommandList *c; |
| struct ErrorInfo *ei; |
| |
| c = cmd_special_alloc(h); |
| |
| if (c == NULL) { /* trouble... */ |
| dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); |
| return -ENOMEM; |
| } |
| |
| fill_cmd(c, HPSA_INQUIRY, h, buf, bufsize, page, scsi3addr, TYPE_CMD); |
| hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); |
| ei = c->err_info; |
| if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) { |
| hpsa_scsi_interpret_error(c); |
| rc = -1; |
| } |
| cmd_special_free(h, c); |
| return rc; |
| } |
| |
| static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr) |
| { |
| int rc = IO_OK; |
| struct CommandList *c; |
| struct ErrorInfo *ei; |
| |
| c = cmd_special_alloc(h); |
| |
| if (c == NULL) { /* trouble... */ |
| dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); |
| return -ENOMEM; |
| } |
| |
| fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0, scsi3addr, TYPE_MSG); |
| hpsa_scsi_do_simple_cmd_core(h, c); |
| /* no unmap needed here because no data xfer. */ |
| |
| ei = c->err_info; |
| if (ei->CommandStatus != 0) { |
| hpsa_scsi_interpret_error(c); |
| rc = -1; |
| } |
| cmd_special_free(h, c); |
| return rc; |
| } |
| |
| static void hpsa_get_raid_level(struct ctlr_info *h, |
| unsigned char *scsi3addr, unsigned char *raid_level) |
| { |
| int rc; |
| unsigned char *buf; |
| |
| *raid_level = RAID_UNKNOWN; |
| buf = kzalloc(64, GFP_KERNEL); |
| if (!buf) |
| return; |
| rc = hpsa_scsi_do_inquiry(h, scsi3addr, 0xC1, buf, 64); |
| if (rc == 0) |
| *raid_level = buf[8]; |
| if (*raid_level > RAID_UNKNOWN) |
| *raid_level = RAID_UNKNOWN; |
| kfree(buf); |
| return; |
| } |
| |
| /* Get the device id from inquiry page 0x83 */ |
| static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr, |
| unsigned char *device_id, int buflen) |
| { |
| int rc; |
| unsigned char *buf; |
| |
| if (buflen > 16) |
| buflen = 16; |
| buf = kzalloc(64, GFP_KERNEL); |
| if (!buf) |
| return -1; |
| rc = hpsa_scsi_do_inquiry(h, scsi3addr, 0x83, buf, 64); |
| if (rc == 0) |
| memcpy(device_id, &buf[8], buflen); |
| kfree(buf); |
| return rc != 0; |
| } |
| |
| static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical, |
| struct ReportLUNdata *buf, int bufsize, |
| int extended_response) |
| { |
| int rc = IO_OK; |
| struct CommandList *c; |
| unsigned char scsi3addr[8]; |
| struct ErrorInfo *ei; |
| |
| c = cmd_special_alloc(h); |
| if (c == NULL) { /* trouble... */ |
| dev_err(&h->pdev->dev, "cmd_special_alloc returned NULL!\n"); |
| return -1; |
| } |
| /* address the controller */ |
| memset(scsi3addr, 0, sizeof(scsi3addr)); |
| fill_cmd(c, logical ? HPSA_REPORT_LOG : HPSA_REPORT_PHYS, h, |
| buf, bufsize, 0, scsi3addr, TYPE_CMD); |
| if (extended_response) |
| c->Request.CDB[1] = extended_response; |
| hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE); |
| ei = c->err_info; |
| if (ei->CommandStatus != 0 && |
| ei->CommandStatus != CMD_DATA_UNDERRUN) { |
| hpsa_scsi_interpret_error(c); |
| rc = -1; |
| } |
| cmd_special_free(h, c); |
| return rc; |
| } |
| |
| static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h, |
| struct ReportLUNdata *buf, |
| int bufsize, int extended_response) |
| { |
| return hpsa_scsi_do_report_luns(h, 0, buf, bufsize, extended_response); |
| } |
| |
| static inline int hpsa_scsi_do_report_log_luns(struct ctlr_info *h, |
| struct ReportLUNdata *buf, int bufsize) |
| { |
| return hpsa_scsi_do_report_luns(h, 1, buf, bufsize, 0); |
| } |
| |
| static inline void hpsa_set_bus_target_lun(struct hpsa_scsi_dev_t *device, |
| int bus, int target, int lun) |
| { |
| device->bus = bus; |
| device->target = target; |
| device->lun = lun; |
| } |
| |
| static int hpsa_update_device_info(struct ctlr_info *h, |
| unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device) |
| { |
| #define OBDR_TAPE_INQ_SIZE 49 |
| unsigned char *inq_buff; |
| |
| inq_buff = kzalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); |
| if (!inq_buff) |
| goto bail_out; |
| |
| /* Do an inquiry to the device to see what it is. */ |
| if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff, |
| (unsigned char) OBDR_TAPE_INQ_SIZE) != 0) { |
| /* Inquiry failed (msg printed already) */ |
| dev_err(&h->pdev->dev, |
| "hpsa_update_device_info: inquiry failed\n"); |
| goto bail_out; |
| } |
| |
| this_device->devtype = (inq_buff[0] & 0x1f); |
| memcpy(this_device->scsi3addr, scsi3addr, 8); |
| memcpy(this_device->vendor, &inq_buff[8], |
| sizeof(this_device->vendor)); |
| memcpy(this_device->model, &inq_buff[16], |
| sizeof(this_device->model)); |
| memcpy(this_device->revision, &inq_buff[32], |
| sizeof(this_device->revision)); |
| memset(this_device->device_id, 0, |
| sizeof(this_device->device_id)); |
| hpsa_get_device_id(h, scsi3addr, this_device->device_id, |
| sizeof(this_device->device_id)); |
| |
| if (this_device->devtype == TYPE_DISK && |
| is_logical_dev_addr_mode(scsi3addr)) |
| hpsa_get_raid_level(h, scsi3addr, &this_device->raid_level); |
| else |
| this_device->raid_level = RAID_UNKNOWN; |
| |
| kfree(inq_buff); |
| return 0; |
| |
| bail_out: |
| kfree(inq_buff); |
| return 1; |
| } |
| |
| static unsigned char *msa2xxx_model[] = { |
| "MSA2012", |
| "MSA2024", |
| "MSA2312", |
| "MSA2324", |
| NULL, |
| }; |
| |
| static int is_msa2xxx(struct ctlr_info *h, struct hpsa_scsi_dev_t *device) |
| { |
| int i; |
| |
| for (i = 0; msa2xxx_model[i]; i++) |
| if (strncmp(device->model, msa2xxx_model[i], |
| strlen(msa2xxx_model[i])) == 0) |
| return 1; |
| return 0; |
| } |
| |
| /* Helper function to assign bus, target, lun mapping of devices. |
| * Puts non-msa2xxx logical volumes on bus 0, msa2xxx logical |
| * volumes on bus 1, physical devices on bus 2. and the hba on bus 3. |
| * Logical drive target and lun are assigned at this time, but |
| * physical device lun and target assignment are deferred (assigned |
| * in hpsa_find_target_lun, called by hpsa_scsi_add_entry.) |
| */ |
| static void figure_bus_target_lun(struct ctlr_info *h, |
| u8 *lunaddrbytes, int *bus, int *target, int *lun, |
| struct hpsa_scsi_dev_t *device) |
| { |
| u32 lunid; |
| |
| if (is_logical_dev_addr_mode(lunaddrbytes)) { |
| /* logical device */ |
| if (unlikely(is_scsi_rev_5(h))) { |
| /* p1210m, logical drives lun assignments |
| * match SCSI REPORT LUNS data. |
| */ |
| lunid = le32_to_cpu(*((__le32 *) lunaddrbytes)); |
| *bus = 0; |
| *target = 0; |
| *lun = (lunid & 0x3fff) + 1; |
| } else { |
| /* not p1210m... */ |
| lunid = le32_to_cpu(*((__le32 *) lunaddrbytes)); |
| if (is_msa2xxx(h, device)) { |
| /* msa2xxx way, put logicals on bus 1 |
| * and match target/lun numbers box |
| * reports. |
| */ |
| *bus = 1; |
| *target = (lunid >> 16) & 0x3fff; |
| *lun = lunid & 0x00ff; |
| } else { |
| /* Traditional smart array way. */ |
| *bus = 0; |
| *lun = 0; |
| *target = lunid & 0x3fff; |
| } |
| } |
| } else { |
| /* physical device */ |
| if (is_hba_lunid(lunaddrbytes)) |
| if (unlikely(is_scsi_rev_5(h))) { |
| *bus = 0; /* put p1210m ctlr at 0,0,0 */ |
| *target = 0; |
| *lun = 0; |
| return; |
| } else |
| *bus = 3; /* traditional smartarray */ |
| else |
| *bus = 2; /* physical disk */ |
| *target = -1; |
| *lun = -1; /* we will fill these in later. */ |
| } |
| } |
| |
| /* |
| * If there is no lun 0 on a target, linux won't find any devices. |
| * For the MSA2xxx boxes, we have to manually detect the enclosure |
| * which is at lun zero, as CCISS_REPORT_PHYSICAL_LUNS doesn't report |
| * it for some reason. *tmpdevice is the target we're adding, |
| * this_device is a pointer into the current element of currentsd[] |
| * that we're building up in update_scsi_devices(), below. |
| * lunzerobits is a bitmap that tracks which targets already have a |
| * lun 0 assigned. |
| * Returns 1 if an enclosure was added, 0 if not. |
| */ |
| static int add_msa2xxx_enclosure_device(struct ctlr_info *h, |
| struct hpsa_scsi_dev_t *tmpdevice, |
| struct hpsa_scsi_dev_t *this_device, u8 *lunaddrbytes, |
| int bus, int target, int lun, unsigned long lunzerobits[], |
| int *nmsa2xxx_enclosures) |
| { |
| unsigned char scsi3addr[8]; |
| |
| if (test_bit(target, lunzerobits)) |
| return 0; /* There is already a lun 0 on this target. */ |
| |
| if (!is_logical_dev_addr_mode(lunaddrbytes)) |
| return 0; /* It's the logical targets that may lack lun 0. */ |
| |
| if (!is_msa2xxx(h, tmpdevice)) |
| return 0; /* It's only the MSA2xxx that have this problem. */ |
| |
| if (lun == 0) /* if lun is 0, then obviously we have a lun 0. */ |
| return 0; |
| |
| if (is_hba_lunid(scsi3addr)) |
| return 0; /* Don't add the RAID controller here. */ |
| |
| if (is_scsi_rev_5(h)) |
| return 0; /* p1210m doesn't need to do this. */ |
| |
| #define MAX_MSA2XXX_ENCLOSURES 32 |
| if (*nmsa2xxx_enclosures >= MAX_MSA2XXX_ENCLOSURES) { |
| dev_warn(&h->pdev->dev, "Maximum number of MSA2XXX " |
| "enclosures exceeded. Check your hardware " |
| "configuration."); |
| return 0; |
| } |
| |
| memset(scsi3addr, 0, 8); |
| scsi3addr[3] = target; |
| if (hpsa_update_device_info(h, scsi3addr, this_device)) |
| return 0; |
| (*nmsa2xxx_enclosures)++; |
| hpsa_set_bus_target_lun(this_device, bus, target, 0); |
| set_bit(target, lunzerobits); |
| return 1; |
| } |
| |
| /* |
| * Do CISS_REPORT_PHYS and CISS_REPORT_LOG. Data is returned in physdev, |
| * logdev. The number of luns in physdev and logdev are returned in |
| * *nphysicals and *nlogicals, respectively. |
| * Returns 0 on success, -1 otherwise. |
| */ |
| static int hpsa_gather_lun_info(struct ctlr_info *h, |
| int reportlunsize, |
| struct ReportLUNdata *physdev, u32 *nphysicals, |
| struct ReportLUNdata *logdev, u32 *nlogicals) |
| { |
| if (hpsa_scsi_do_report_phys_luns(h, physdev, reportlunsize, 0)) { |
| dev_err(&h->pdev->dev, "report physical LUNs failed.\n"); |
| return -1; |
| } |
| *nphysicals = be32_to_cpu(*((__be32 *)physdev->LUNListLength)) / 8; |
| if (*nphysicals > HPSA_MAX_PHYS_LUN) { |
| dev_warn(&h->pdev->dev, "maximum physical LUNs (%d) exceeded." |
| " %d LUNs ignored.\n", HPSA_MAX_PHYS_LUN, |
| *nphysicals - HPSA_MAX_PHYS_LUN); |
| *nphysicals = HPSA_MAX_PHYS_LUN; |
| } |
| if (hpsa_scsi_do_report_log_luns(h, logdev, reportlunsize)) { |
| dev_err(&h->pdev->dev, "report logical LUNs failed.\n"); |
| return -1; |
| } |
| *nlogicals = be32_to_cpu(*((__be32 *) logdev->LUNListLength)) / 8; |
| /* Reject Logicals in excess of our max capability. */ |
| if (*nlogicals > HPSA_MAX_LUN) { |
| dev_warn(&h->pdev->dev, |
| "maximum logical LUNs (%d) exceeded. " |
| "%d LUNs ignored.\n", HPSA_MAX_LUN, |
| *nlogicals - HPSA_MAX_LUN); |
| *nlogicals = HPSA_MAX_LUN; |
| } |
| if (*nlogicals + *nphysicals > HPSA_MAX_PHYS_LUN) { |
| dev_warn(&h->pdev->dev, |
| "maximum logical + physical LUNs (%d) exceeded. " |
| "%d LUNs ignored.\n", HPSA_MAX_PHYS_LUN, |
| *nphysicals + *nlogicals - HPSA_MAX_PHYS_LUN); |
| *nlogicals = HPSA_MAX_PHYS_LUN - *nphysicals; |
| } |
| return 0; |
| } |
| |
| u8 *figure_lunaddrbytes(struct ctlr_info *h, int raid_ctlr_position, int i, |
| int nphysicals, int nlogicals, struct ReportLUNdata *physdev_list, |
| struct ReportLUNdata *logdev_list) |
| { |
| /* Helper function, figure out where the LUN ID info is coming from |
| * given index i, lists of physical and logical devices, where in |
| * the list the raid controller is supposed to appear (first or last) |
| */ |
| |
| int logicals_start = nphysicals + (raid_ctlr_position == 0); |
| int last_device = nphysicals + nlogicals + (raid_ctlr_position == 0); |
| |
| if (i == raid_ctlr_position) |
| return RAID_CTLR_LUNID; |
| |
| if (i < logicals_start) |
| return &physdev_list->LUN[i - (raid_ctlr_position == 0)][0]; |
| |
| if (i < last_device) |
| return &logdev_list->LUN[i - nphysicals - |
| (raid_ctlr_position == 0)][0]; |
| BUG(); |
| return NULL; |
| } |
| |
| static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) |
| { |
| /* the idea here is we could get notified |
| * that some devices have changed, so we do a report |
| * physical luns and report logical luns cmd, and adjust |
| * our list of devices accordingly. |
| * |
| * The scsi3addr's of devices won't change so long as the |
| * adapter is not reset. That means we can rescan and |
| * tell which devices we already know about, vs. new |
| * devices, vs. disappearing devices. |
| */ |
| struct ReportLUNdata *physdev_list = NULL; |
| struct ReportLUNdata *logdev_list = NULL; |
| unsigned char *inq_buff = NULL; |
| u32 nphysicals = 0; |
| u32 nlogicals = 0; |
| u32 ndev_allocated = 0; |
| struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice; |
| int ncurrent = 0; |
| int reportlunsize = sizeof(*physdev_list) + HPSA_MAX_PHYS_LUN * 8; |
| int i, nmsa2xxx_enclosures, ndevs_to_allocate; |
| int bus, target, lun; |
| int raid_ctlr_position; |
| DECLARE_BITMAP(lunzerobits, HPSA_MAX_TARGETS_PER_CTLR); |
| |
| currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_SCSI_DEVS_PER_HBA, |
| GFP_KERNEL); |
| physdev_list = kzalloc(reportlunsize, GFP_KERNEL); |
| logdev_list = kzalloc(reportlunsize, GFP_KERNEL); |
| inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); |
| tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL); |
| |
| if (!currentsd || !physdev_list || !logdev_list || |
| !inq_buff || !tmpdevice) { |
| dev_err(&h->pdev->dev, "out of memory\n"); |
| goto out; |
| } |
| memset(lunzerobits, 0, sizeof(lunzerobits)); |
| |
| if (hpsa_gather_lun_info(h, reportlunsize, physdev_list, &nphysicals, |
| logdev_list, &nlogicals)) |
| goto out; |
| |
| /* We might see up to 32 MSA2xxx enclosures, actually 8 of them |
| * but each of them 4 times through different paths. The plus 1 |
| * is for the RAID controller. |
| */ |
| ndevs_to_allocate = nphysicals + nlogicals + MAX_MSA2XXX_ENCLOSURES + 1; |
| |
| /* Allocate the per device structures */ |
| for (i = 0; i < ndevs_to_allocate; i++) { |
| currentsd[i] = kzalloc(sizeof(*currentsd[i]), GFP_KERNEL); |
| if (!currentsd[i]) { |
| dev_warn(&h->pdev->dev, "out of memory at %s:%d\n", |
| __FILE__, __LINE__); |
| goto out; |
| } |
| ndev_allocated++; |
| } |
| |
| if (unlikely(is_scsi_rev_5(h))) |
| raid_ctlr_position = 0; |
| else |
| raid_ctlr_position = nphysicals + nlogicals; |
| |
| /* adjust our table of devices */ |
| nmsa2xxx_enclosures = 0; |
| for (i = 0; i < nphysicals + nlogicals + 1; i++) { |
| u8 *lunaddrbytes; |
| |
| /* Figure out where the LUN ID info is coming from */ |
| lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position, |
| i, nphysicals, nlogicals, physdev_list, logdev_list); |
| /* skip masked physical devices. */ |
| if (lunaddrbytes[3] & 0xC0 && |
| i < nphysicals + (raid_ctlr_position == 0)) |
| continue; |
| |
| /* Get device type, vendor, model, device id */ |
| if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice)) |
| continue; /* skip it if we can't talk to it. */ |
| figure_bus_target_lun(h, lunaddrbytes, &bus, &target, &lun, |
| tmpdevice); |
| this_device = currentsd[ncurrent]; |
| |
| /* |
| * For the msa2xxx boxes, we have to insert a LUN 0 which |
| * doesn't show up in CCISS_REPORT_PHYSICAL data, but there |
| * is nonetheless an enclosure device there. We have to |
| * present that otherwise linux won't find anything if |
| * there is no lun 0. |
| */ |
| if (add_msa2xxx_enclosure_device(h, tmpdevice, this_device, |
| lunaddrbytes, bus, target, lun, lunzerobits, |
| &nmsa2xxx_enclosures)) { |
| ncurrent++; |
| this_device = currentsd[ncurrent]; |
| } |
| |
| *this_device = *tmpdevice; |
| hpsa_set_bus_target_lun(this_device, bus, target, lun); |
| |
| switch (this_device->devtype) { |
| case TYPE_ROM: { |
| /* We don't *really* support actual CD-ROM devices, |
| * just "One Button Disaster Recovery" tape drive |
| * which temporarily pretends to be a CD-ROM drive. |
| * So we check that the device is really an OBDR tape |
| * device by checking for "$DR-10" in bytes 43-48 of |
| * the inquiry data. |
| */ |
| char obdr_sig[7]; |
| #define OBDR_TAPE_SIG "$DR-10" |
| strncpy(obdr_sig, &inq_buff[43], 6); |
| obdr_sig[6] = '\0'; |
| if (strncmp(obdr_sig, OBDR_TAPE_SIG, 6) != 0) |
| /* Not OBDR device, ignore it. */ |
| break; |
| } |
| ncurrent++; |
| break; |
| case TYPE_DISK: |
| if (i < nphysicals) |
| break; |
| ncurrent++; |
| break; |
| case TYPE_TAPE: |
| case TYPE_MEDIUM_CHANGER: |
| ncurrent++; |
| break; |
| case TYPE_RAID: |
| /* Only present the Smartarray HBA as a RAID controller. |
| * If it's a RAID controller other than the HBA itself |
| * (an external RAID controller, MSA500 or similar) |
| * don't present it. |
| */ |
| if (!is_hba_lunid(lunaddrbytes)) |
| break; |
| ncurrent++; |
| break; |
| default: |
| break; |
| } |
| if (ncurrent >= HPSA_MAX_SCSI_DEVS_PER_HBA) |
| break; |
| } |
| adjust_hpsa_scsi_table(h, hostno, currentsd, ncurrent); |
| out: |
| kfree(tmpdevice); |
| for (i = 0; i < ndev_allocated; i++) |
| kfree(currentsd[i]); |
| kfree(currentsd); |
| kfree(inq_buff); |
| kfree(physdev_list); |
| kfree(logdev_list); |
| } |
| |
| /* hpsa_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci |
| * dma mapping and fills in the scatter gather entries of the |
| * hpsa command, cp. |
| */ |
| static int hpsa_scatter_gather(struct ctlr_info *h, |
| struct CommandList *cp, |
| struct scsi_cmnd *cmd) |
| { |
| unsigned int len; |
| struct scatterlist *sg; |
| u64 addr64; |
| int use_sg, i, sg_index, chained; |
| struct SGDescriptor *curr_sg; |
| |
| BUG_ON(scsi_sg_count(cmd) > h->maxsgentries); |
| |
| use_sg = scsi_dma_map(cmd); |
| if (use_sg < 0) |
| return use_sg; |
| |
| if (!use_sg) |
| goto sglist_finished; |
| |
| curr_sg = cp->SG; |
| chained = 0; |
| sg_index = 0; |
| scsi_for_each_sg(cmd, sg, use_sg, i) { |
| if (i == h->max_cmd_sg_entries - 1 && |
| use_sg > h->max_cmd_sg_entries) { |
| chained = 1; |
| curr_sg = h->cmd_sg_list[cp->cmdindex]; |
| sg_index = 0; |
| } |
| addr64 = (u64) sg_dma_address(sg); |
| len = sg_dma_len(sg); |
| curr_sg->Addr.lower = (u32) (addr64 & 0x0FFFFFFFFULL); |
| curr_sg->Addr.upper = (u32) ((addr64 >> 32) & 0x0FFFFFFFFULL); |
| curr_sg->Len = len; |
| curr_sg->Ext = 0; /* we are not chaining */ |
| curr_sg++; |
| } |
| |
| if (use_sg + chained > h->maxSG) |
| h->maxSG = use_sg + chained; |
| |
| if (chained) { |
| cp->Header.SGList = h->max_cmd_sg_entries; |
| cp->Header.SGTotal = (u16) (use_sg + 1); |
| hpsa_map_sg_chain_block(h, cp); |
| return 0; |
| } |
| |
| sglist_finished: |
| |
| cp->Header.SGList = (u8) use_sg; /* no. SGs contig in this cmd */ |
| cp->Header.SGTotal = (u16) use_sg; /* total sgs in this cmd list */ |
| return 0; |
| } |
| |
| |
| static int hpsa_scsi_queue_command_lck(struct scsi_cmnd *cmd, |
| void (*done)(struct scsi_cmnd *)) |
| { |
| struct ctlr_info *h; |
| struct hpsa_scsi_dev_t *dev; |
| unsigned char scsi3addr[8]; |
| struct CommandList *c; |
| unsigned long flags; |
| |
| /* Get the ptr to our adapter structure out of cmd->host. */ |
| h = sdev_to_hba(cmd->device); |
| dev = cmd->device->hostdata; |
| if (!dev) { |
| cmd->result = DID_NO_CONNECT << 16; |
| done(cmd); |
| return 0; |
| } |
| memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr)); |
| |
| /* Need a lock as this is being allocated from the pool */ |
| spin_lock_irqsave(&h->lock, flags); |
| c = cmd_alloc(h); |
| spin_unlock_irqrestore(&h->lock, flags); |
| if (c == NULL) { /* trouble... */ |
| dev_err(&h->pdev->dev, "cmd_alloc returned NULL!\n"); |
| return SCSI_MLQUEUE_HOST_BUSY; |
| } |
| |
| /* Fill in the command list header */ |
| |
| cmd->scsi_done = done; /* save this for use by completion code */ |
| |
| /* save c in case we have to abort it */ |
| cmd->host_scribble = (unsigned char *) c; |
| |
| c->cmd_type = CMD_SCSI; |
| c->scsi_cmd = cmd; |
| c->Header.ReplyQueue = 0; /* unused in simple mode */ |
| memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8); |
| c->Header.Tag.lower = (c->cmdindex << DIRECT_LOOKUP_SHIFT); |
| c->Header.Tag.lower |= DIRECT_LOOKUP_BIT; |
| |
| /* Fill in the request block... */ |
| |
| c->Request.Timeout = 0; |
| memset(c->Request.CDB, 0, sizeof(c->Request.CDB)); |
| BUG_ON(cmd->cmd_len > sizeof(c->Request.CDB)); |
| c->Request.CDBLen = cmd->cmd_len; |
| memcpy(c->Request.CDB, cmd->cmnd, cmd->cmd_len); |
| c->Request.Type.Type = TYPE_CMD; |
| c->Request.Type.Attribute = ATTR_SIMPLE; |
| switch (cmd->sc_data_direction) { |
| case DMA_TO_DEVICE: |
| c->Request.Type.Direction = XFER_WRITE; |
| break; |
| case DMA_FROM_DEVICE: |
| c->Request.Type.Direction = XFER_READ; |
| break; |
| case DMA_NONE: |
| c->Request.Type.Direction = XFER_NONE; |
| break; |
| case DMA_BIDIRECTIONAL: |
| /* This can happen if a buggy application does a scsi passthru |
| * and sets both inlen and outlen to non-zero. ( see |
| * ../scsi/scsi_ioctl.c:scsi_ioctl_send_command() ) |
| */ |
| |
| c->Request.Type.Direction = XFER_RSVD; |
| /* This is technically wrong, and hpsa controllers should |
| * reject it with CMD_INVALID, which is the most correct |
| * response, but non-fibre backends appear to let it |
| * slide by, and give the same results as if this field |
| * were set correctly. Either way is acceptable for |
| * our purposes here. |
| */ |
| |
| break; |
| |
| default: |
| dev_err(&h->pdev->dev, "unknown data direction: %d\n", |
| cmd->sc_data_direction); |
| BUG(); |
| break; |
| } |
| |
| if (hpsa_scatter_gather(h, c, cmd) < 0) { /* Fill SG list */ |
| cmd_free(h, c); |
| return SCSI_MLQUEUE_HOST_BUSY; |
| } |
| enqueue_cmd_and_start_io(h, c); |
| /* the cmd'll come back via intr handler in complete_scsi_command() */ |
| return 0; |
| } |
| |
| static DEF_SCSI_QCMD(hpsa_scsi_queue_command) |
| |
| static void hpsa_scan_start(struct Scsi_Host *sh) |
| { |
| struct ctlr_info *h = shost_to_hba(sh); |
| unsigned long flags; |
| |
| /* wait until any scan already in progress is finished. */ |
| while (1) { |
| spin_lock_irqsave(&h->scan_lock, flags); |
| if (h->scan_finished) |
| break; |
| spin_unlock_irqrestore(&h->scan_lock, flags); |
| wait_event(h->scan_wait_queue, h->scan_finished); |
| /* Note: We don't need to worry about a race between this |
| * thread and driver unload because the midlayer will |
| * have incremented the reference count, so unload won't |
| * happen if we're in here. |
| */ |
| } |
| h->scan_finished = 0; /* mark scan as in progress */ |
| spin_unlock_irqrestore(&h->scan_lock, flags); |
| |
| hpsa_update_scsi_devices(h, h->scsi_host->host_no); |
| |
| spin_lock_irqsave(&h->scan_lock, flags); |
| h->scan_finished = 1; /* mark scan as finished. */ |
| wake_up_all(&h->scan_wait_queue); |
| spin_unlock_irqrestore(&h->scan_lock, flags); |
| } |
| |
| static int hpsa_scan_finished(struct Scsi_Host *sh, |
| unsigned long elapsed_time) |
| { |
| struct ctlr_info *h = shost_to_hba(sh); |
| unsigned long flags; |
| int finished; |
| |
| spin_lock_irqsave(&h->scan_lock, flags); |
| finished = h->scan_finished; |
| spin_unlock_irqrestore(&h->scan_lock, flags); |
| return finished; |
| } |
| |
| static int hpsa_change_queue_depth(struct scsi_device *sdev, |
| int qdepth, int reason) |
| { |
| struct ctlr_info *h = sdev_to_hba(sdev); |
| |
| if (reason != SCSI_QDEPTH_DEFAULT) |
| return -ENOTSUPP; |
| |
| if (qdepth < 1) |
| qdepth = 1; |
| else |
| if (qdepth > h->nr_cmds) |
| qdepth = h->nr_cmds; |
| scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth); |
| return sdev->queue_depth; |
| } |
| |
| static void hpsa_unregister_scsi(struct ctlr_info *h) |
| { |
| /* we are being forcibly unloaded, and may not refuse. */ |
| scsi_remove_host(h->scsi_host); |
| scsi_host_put(h->scsi_host); |
| h->scsi_host = NULL; |
| } |
| |
| static int hpsa_register_scsi(struct ctlr_info *h) |
| { |
| int rc; |
| |
| rc = hpsa_scsi_detect(h); |
| if (rc != 0) |
| dev_err(&h->pdev->dev, "hpsa_register_scsi: failed" |
| " hpsa_scsi_detect(), rc is %d\n", rc); |
| return rc; |
| } |
| |
| static int wait_for_device_to_become_ready(struct ctlr_info *h, |
| unsigned char lunaddr[]) |
| { |
| int rc = 0; |
| int count = 0; |
| int waittime = 1; /* seconds */ |
| struct CommandList *c; |
| |
| c = cmd_special_alloc(h); |
| if (!c) { |
| dev_warn(&h->pdev->dev, "out of memory in " |
| "wait_for_device_to_become_ready.\n"); |
| return IO_ERROR; |
| } |
| |
| /* Send test unit ready until device ready, or give up. */ |
| while (count < HPSA_TUR_RETRY_LIMIT) { |
| |
| /* Wait for a bit. do this first, because if we send |
| * the TUR right away, the reset will just abort it. |
| */ |
| msleep(1000 * waittime); |
| count++; |
| |
| /* Increase wait time with each try, up to a point. */ |
| if (waittime < HPSA_MAX_WAIT_INTERVAL_SECS) |
| waittime = waittime * 2; |
| |
| /* Send the Test Unit Ready */ |
| fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, lunaddr, TYPE_CMD); |
| hpsa_scsi_do_simple_cmd_core(h, c); |
| /* no unmap needed here because no data xfer. */ |
| |
| if (c->err_info->CommandStatus == CMD_SUCCESS) |
| break; |
| |
| if (c->err_info->CommandStatus == CMD_TARGET_STATUS && |
| c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION && |
| (c->err_info->SenseInfo[2] == NO_SENSE || |
| c->err_info->SenseInfo[2] == UNIT_ATTENTION)) |
| break; |
| |
| dev_warn(&h->pdev->dev, "waiting %d secs " |
| "for device to become ready.\n", waittime); |
| rc = 1; /* device not ready. */ |
| } |
| |
| if (rc) |
| dev_warn(&h->pdev->dev, "giving up on device.\n"); |
| else |
| dev_warn(&h->pdev->dev, "device is ready.\n"); |
| |
| cmd_special_free(h, c); |
| return rc; |
| } |
| |
| /* Need at least one of these error handlers to keep ../scsi/hosts.c from |
| * complaining. Doing a host- or bus-reset can't do anything good here. |
| */ |
| static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd) |
| { |
| int rc; |
| struct ctlr_info *h; |
| struct hpsa_scsi_dev_t *dev; |
| |
| /* find the controller to which the command to be aborted was sent */ |
| h = sdev_to_hba(scsicmd->device); |
| if (h == NULL) /* paranoia */ |
| return FAILED; |
| dev = scsicmd->device->hostdata; |
| if (!dev) { |
| dev_err(&h->pdev->dev, "hpsa_eh_device_reset_handler: " |
| "device lookup failed.\n"); |
| return FAILED; |
| } |
| dev_warn(&h->pdev->dev, "resetting device %d:%d:%d:%d\n", |
| h->scsi_host->host_no, dev->bus, dev->target, dev->lun); |
| /* send a reset to the SCSI LUN which the command was sent to */ |
| rc = hpsa_send_reset(h, dev->scsi3addr); |
| if (rc == 0 && wait_for_device_to_become_ready(h, dev->scsi3addr) == 0) |
| return SUCCESS; |
| |
| dev_warn(&h->pdev->dev, "resetting device failed.\n"); |
| return FAILED; |
| } |
| |
| /* |
| * For operations that cannot sleep, a command block is allocated at init, |
| * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track |
| * which ones are free or in use. Lock must be held when calling this. |
| * cmd_free() is the complement. |
| */ |
| static struct CommandList *cmd_alloc(struct ctlr_info *h) |
| { |
| struct CommandList *c; |
| int i; |
| union u64bit temp64; |
| dma_addr_t cmd_dma_handle, err_dma_handle; |
| |
| do { |
| i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds); |
| if (i == h->nr_cmds) |
| return NULL; |
| } while (test_and_set_bit |
| (i & (BITS_PER_LONG - 1), |
| h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0); |
| c = h->cmd_pool + i; |
| memset(c, 0, sizeof(*c)); |
| cmd_dma_handle = h->cmd_pool_dhandle |
| + i * sizeof(*c); |
| c->err_info = h->errinfo_pool + i; |
| memset(c->err_info, 0, sizeof(*c->err_info)); |
| err_dma_handle = h->errinfo_pool_dhandle |
| + i * sizeof(*c->err_info); |
| h->nr_allocs++; |
| |
| c->cmdindex = i; |
| |
| INIT_HLIST_NODE(&c->list); |
| c->busaddr = (u32) cmd_dma_handle; |
| temp64.val = (u64) err_dma_handle; |
| c->ErrDesc.Addr.lower = temp64.val32.lower; |
| c->ErrDesc.Addr.upper = temp64.val32.upper; |
| c->ErrDesc.Len = sizeof(*c->err_info); |
| |
| c->h = h; |
| return c; |
| } |
| |
| /* For operations that can wait for kmalloc to possibly sleep, |
| * this routine can be called. Lock need not be held to call |
| * cmd_special_alloc. cmd_special_free() is the complement. |
| */ |
| static struct CommandList *cmd_special_alloc(struct ctlr_info *h) |
| { |
| struct CommandList *c; |
| union u64bit temp64; |
| dma_addr_t cmd_dma_handle, err_dma_handle; |
| |
| c = pci_alloc_consistent(h->pdev, sizeof(*c), &cmd_dma_handle); |
| if (c == NULL) |
| return NULL; |
| memset(c, 0, sizeof(*c)); |
| |
| c->cmdindex = -1; |
| |
| c->err_info = pci_alloc_consistent(h->pdev, sizeof(*c->err_info), |
| &err_dma_handle); |
| |
| if (c->err_info == NULL) { |
| pci_free_consistent(h->pdev, |
| sizeof(*c), c, cmd_dma_handle); |
| return NULL; |
| } |
| memset(c->err_info, 0, sizeof(*c->err_info)); |
| |
| INIT_HLIST_NODE(&c->list); |
| c->busaddr = (u32) cmd_dma_handle; |
| temp64.val = (u64) err_dma_handle; |
| c->ErrDesc.Addr.lower = temp64.val32.lower; |
| c->ErrDesc.Addr.upper = temp64.val32.upper; |
| c->ErrDesc.Len = sizeof(*c->err_info); |
| |
| c->h = h; |
| return c; |
| } |
| |
| static void cmd_free(struct ctlr_info *h, struct CommandList *c) |
| { |
| int i; |
| |
| i = c - h->cmd_pool; |
| clear_bit(i & (BITS_PER_LONG - 1), |
| h->cmd_pool_bits + (i / BITS_PER_LONG)); |
| h->nr_frees++; |
| } |
| |
| static void cmd_special_free(struct ctlr_info *h, struct CommandList *c) |
| { |
| union u64bit temp64; |
| |
| temp64.val32.lower = c->ErrDesc.Addr.lower; |
| temp64.val32.upper = c->ErrDesc.Addr.upper; |
| pci_free_consistent(h->pdev, sizeof(*c->err_info), |
| c->err_info, (dma_addr_t) temp64.val); |
| pci_free_consistent(h->pdev, sizeof(*c), |
| c, (dma_addr_t) c->busaddr); |
| } |
| |
| #ifdef CONFIG_COMPAT |
| |
| static int hpsa_ioctl32_passthru(struct scsi_device *dev, int cmd, void *arg) |
| { |
| IOCTL32_Command_struct __user *arg32 = |
| (IOCTL32_Command_struct __user *) arg; |
| IOCTL_Command_struct arg64; |
| IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64)); |
| int err; |
| u32 cp; |
| |
| err = 0; |
| err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info, |
| sizeof(arg64.LUN_info)); |
| err |= copy_from_user(&arg64.Request, &arg32->Request, |
| sizeof(arg64.Request)); |
| err |= copy_from_user(&arg64.error_info, &arg32->error_info, |
| sizeof(arg64.error_info)); |
| err |= get_user(arg64.buf_size, &arg32->buf_size); |
| err |= get_user(cp, &arg32->buf); |
| arg64.buf = compat_ptr(cp); |
| err |= copy_to_user(p, &arg64, sizeof(arg64)); |
| |
| if (err) |
| return -EFAULT; |
| |
| err = hpsa_ioctl(dev, CCISS_PASSTHRU, (void *)p); |
| if (err) |
| return err; |
| err |= copy_in_user(&arg32->error_info, &p->error_info, |
| sizeof(arg32->error_info)); |
| if (err) |
| return -EFAULT; |
| return err; |
| } |
| |
| static int hpsa_ioctl32_big_passthru(struct scsi_device *dev, |
| int cmd, void *arg) |
| { |
| BIG_IOCTL32_Command_struct __user *arg32 = |
| (BIG_IOCTL32_Command_struct __user *) arg; |
| BIG_IOCTL_Command_struct arg64; |
| BIG_IOCTL_Command_struct __user *p = |
| compat_alloc_user_space(sizeof(arg64)); |
| int err; |
| u32 cp; |
| |
| err = 0; |
| err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info, |
| sizeof(arg64.LUN_info)); |
| err |= copy_from_user(&arg64.Request, &arg32->Request, |
| sizeof(arg64.Request)); |
| err |= copy_from_user(&arg64.error_info, &arg32->error_info, |
| sizeof(arg64.error_info)); |
| err |= get_user(arg64.buf_size, &arg32->buf_size); |
| err |= get_user(arg64.malloc_size, &arg32->malloc_size); |
| err |= get_user(cp, &arg32->buf); |
| arg64.buf = compat_ptr(cp); |
| err |= copy_to_user(p, &arg64, sizeof(arg64)); |
| |
| if (err) |
| return -EFAULT; |
| |
| err = hpsa_ioctl(dev, CCISS_BIG_PASSTHRU, (void *)p); |
| if (err) |
| return err; |
| err |= copy_in_user(&arg32->error_info, &p->error_info, |
| sizeof(arg32->error_info)); |
| if (err) |
| return -EFAULT; |
| return err; |
| } |
| |
| static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, void *arg) |
| { |
| switch (cmd) { |
| case CCISS_GETPCIINFO: |
| case CCISS_GETINTINFO: |
| case CCISS_SETINTINFO: |
| case CCISS_GETNODENAME: |
| case CCISS_SETNODENAME: |
| case CCISS_GETHEARTBEAT: |
| case CCISS_GETBUSTYPES: |
| case CCISS_GETFIRMVER: |
| case CCISS_GETDRIVVER: |
| case CCISS_REVALIDVOLS: |
| case CCISS_DEREGDISK: |
| case CCISS_REGNEWDISK: |
| case CCISS_REGNEWD: |
| case CCISS_RESCANDISK: |
| case CCISS_GETLUNINFO: |
| return hpsa_ioctl(dev, cmd, arg); |
| |
| case CCISS_PASSTHRU32: |
| return hpsa_ioctl32_passthru(dev, cmd, arg); |
| case CCISS_BIG_PASSTHRU32: |
| return hpsa_ioctl32_big_passthru(dev, cmd, arg); |
| |
| default: |
| return -ENOIOCTLCMD; |
| } |
| } |
| #endif |
| |
| static int hpsa_getpciinfo_ioctl(struct ctlr_info *h, void __user *argp) |
| { |
| struct hpsa_pci_info pciinfo; |
| |
| if (!argp) |
| return -EINVAL; |
| pciinfo.domain = pci_domain_nr(h->pdev->bus); |
| pciinfo.bus = h->pdev->bus->number; |
| pciinfo.dev_fn = h->pdev->devfn; |
| pciinfo.board_id = h->board_id; |
| if (copy_to_user(argp, &pciinfo, sizeof(pciinfo))) |
| return -EFAULT; |
| return 0; |
| } |
| |
| static int hpsa_getdrivver_ioctl(struct ctlr_info *h, void __user *argp) |
| { |
| DriverVer_type DriverVer; |
| unsigned char vmaj, vmin, vsubmin; |
| int rc; |
| |
| rc = sscanf(HPSA_DRIVER_VERSION, "%hhu.%hhu.%hhu", |
| &vmaj, &vmin, &vsubmin); |
| if (rc != 3) { |
| dev_info(&h->pdev->dev, "driver version string '%s' " |
| "unrecognized.", HPSA_DRIVER_VERSION); |
| vmaj = 0; |
| vmin = 0; |
| vsubmin = 0; |
| } |
| DriverVer = (vmaj << 16) | (vmin << 8) | vsubmin; |
| if (!argp) |
| return -EINVAL; |
| if (copy_to_user(argp, &DriverVer, sizeof(DriverVer_type))) |
| return -EFAULT; |
| return 0; |
| } |
| |
| static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) |
| { |
| IOCTL_Command_struct iocommand; |
| struct CommandList *c; |
| char *buff = NULL; |
| union u64bit temp64; |
| |
| if (!argp) |
| return -EINVAL; |
| if (!capable(CAP_SYS_RAWIO)) |
| return -EPERM; |
| if (copy_from_user(&iocommand, argp, sizeof(iocommand))) |
| return -EFAULT; |
| if ((iocommand.buf_size < 1) && |
| (iocommand.Request.Type.Direction != XFER_NONE)) { |
| return -EINVAL; |
| } |
| if (iocommand.buf_size > 0) { |
| buff = kmalloc(iocommand.buf_size, GFP_KERNEL); |
| if (buff == NULL) |
| return -EFAULT; |
| } |
| if (iocommand.Request.Type.Direction == XFER_WRITE) { |
| /* Copy the data into the buffer we created */ |
| if (copy_from_user(buff, iocommand.buf, iocommand.buf_size)) { |
| kfree(buff); |
| return -EFAULT; |
| } |
| } else |
| memset(buff, 0, iocommand.buf_size); |
| c = cmd_special_alloc(h); |
| if (c == NULL) { |
| kfree(buff); |
| return -ENOMEM; |
| } |
| /* Fill in the command type */ |
| c->cmd_type = CMD_IOCTL_PEND; |
| /* Fill in Command Header */ |
| c->Header.ReplyQueue = 0; /* unused in simple mode */ |
| if (iocommand.buf_size > 0) { /* buffer to fill */ |
| c->Header.SGList = 1; |
| c->Header.SGTotal = 1; |
| } else { /* no buffers to fill */ |
| c->Header.SGList = 0; |
| c->Header.SGTotal = 0; |
| } |
| memcpy(&c->Header.LUN, &iocommand.LUN_info, sizeof(c->Header.LUN)); |
| /* use the kernel address the cmd block for tag */ |
| c->Header.Tag.lower = c->busaddr; |
| |
| /* Fill in Request block */ |
| memcpy(&c->Request, &iocommand.Request, |
| sizeof(c->Request)); |
| |
| /* Fill in the scatter gather information */ |
| if (iocommand.buf_size > 0) { |
| temp64.val = pci_map_single(h->pdev, buff, |
| iocommand.buf_size, PCI_DMA_BIDIRECTIONAL); |
| c->SG[0].Addr.lower = temp64.val32.lower; |
| c->SG[0].Addr.upper = temp64.val32.upper; |
| c->SG[0].Len = iocommand.buf_size; |
| c->SG[0].Ext = 0; /* we are not chaining*/ |
| } |
| hpsa_scsi_do_simple_cmd_core(h, c); |
| hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL); |
| check_ioctl_unit_attention(h, c); |
| |
| /* Copy the error information out */ |
| memcpy(&iocommand.error_info, c->err_info, |
| sizeof(iocommand.error_info)); |
| if (copy_to_user(argp, &iocommand, sizeof(iocommand))) { |
| kfree(buff); |
| cmd_special_free(h, c); |
| return -EFAULT; |
| } |
| |
| if (iocommand.Request.Type.Direction == XFER_READ) { |
| /* Copy the data out of the buffer we created */ |
| if (copy_to_user(iocommand.buf, buff, iocommand.buf_size)) { |
| kfree(buff); |
| cmd_special_free(h, c); |
| return -EFAULT; |
| } |
| } |
| kfree(buff); |
| cmd_special_free(h, c); |
| return 0; |
| } |
| |
| static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp) |
| { |
| BIG_IOCTL_Command_struct *ioc; |
| struct CommandList *c; |
| unsigned char **buff = NULL; |
| int *buff_size = NULL; |
| union u64bit temp64; |
| BYTE sg_used = 0; |
| int status = 0; |
| int i; |
| u32 left; |
| u32 sz; |
| BYTE __user *data_ptr; |
| |
| if (!argp) |
| return -EINVAL; |
| if (!capable(CAP_SYS_RAWIO)) |
| return -EPERM; |
| ioc = (BIG_IOCTL_Command_struct *) |
| kmalloc(sizeof(*ioc), GFP_KERNEL); |
| if (!ioc) { |
| status = -ENOMEM; |
| goto cleanup1; |
| } |
| if (copy_from_user(ioc, argp, sizeof(*ioc))) { |
| status = -EFAULT; |
| goto cleanup1; |
| } |
| if ((ioc->buf_size < 1) && |
| (ioc->Request.Type.Direction != XFER_NONE)) { |
| status = -EINVAL; |
| goto cleanup1; |
| } |
| /* Check kmalloc limits using all SGs */ |
| if (ioc->malloc_size > MAX_KMALLOC_SIZE) { |
| status = -EINVAL; |
| goto cleanup1; |
| } |
| if (ioc->buf_size > ioc->malloc_size * MAXSGENTRIES) { |
| status = -EINVAL; |
| goto cleanup1; |
| } |
| buff = kzalloc(MAXSGENTRIES * sizeof(char *), GFP_KERNEL); |
| if (!buff) { |
| status = -ENOMEM; |
| goto cleanup1; |
| } |
| buff_size = kmalloc(MAXSGENTRIES * sizeof(int), GFP_KERNEL); |
| if (!buff_size) { |
| status = -ENOMEM; |
| goto cleanup1; |
| } |
| left = ioc->buf_size; |
| data_ptr = ioc->buf; |
| while (left) { |
| sz = (left > ioc->malloc_size) ? ioc->malloc_size : left; |
| buff_size[sg_used] = sz; |
| buff[sg_used] = kmalloc(sz, GFP_KERNEL); |
| if (buff[sg_used] == NULL) { |
| status = -ENOMEM; |
| goto cleanup1; |
| } |
| if (ioc->Request.Type.Direction == XFER_WRITE) { |
| if (copy_from_user(buff[sg_used], data_ptr, sz)) { |
| status = -ENOMEM; |
| goto cleanup1; |
| } |
| } else |
| memset(buff[sg_used], 0, sz); |
| left -= sz; |
| data_ptr += sz; |
| sg_used++; |
| } |
| c = cmd_special_alloc(h); |
| if (c == NULL) { |
| status = -ENOMEM; |
| goto cleanup1; |
| } |
| c->cmd_type = CMD_IOCTL_PEND; |
| c->Header.ReplyQueue = 0; |
| |
| if (ioc->buf_size > 0) { |
| c->Header.SGList = sg_used; |
| c->Header.SGTotal = sg_used; |
| } else { |
| c->Header.SGList = 0; |
| c->Header.SGTotal = 0; |
| } |
| memcpy(&c->Header.LUN, &ioc->LUN_info, sizeof(c->Header.LUN)); |
| c->Header.Tag.lower = c->busaddr; |
| memcpy(&c->Request, &ioc->Request, sizeof(c->Request)); |
| if (ioc->buf_size > 0) { |
| int i; |
| for (i = 0; i < sg_used; i++) { |
| temp64.val = pci_map_single(h->pdev, buff[i], |
| buff_size[i], PCI_DMA_BIDIRECTIONAL); |
| c->SG[i].Addr.lower = temp64.val32.lower; |
| c->SG[i].Addr.upper = temp64.val32.upper; |
| c->SG[i].Len = buff_size[i]; |
| /* we are not chaining */ |
| c->SG[i].Ext = 0; |
| } |
| } |
| hpsa_scsi_do_simple_cmd_core(h, c); |
| hpsa_pci_unmap(h->pdev, c, sg_used, PCI_DMA_BIDIRECTIONAL); |
| check_ioctl_unit_attention(h, c); |
| /* Copy the error information out */ |
| memcpy(&ioc->error_info, c->err_info, sizeof(ioc->error_info)); |
| if (copy_to_user(argp, ioc, sizeof(*ioc))) { |
| cmd_special_free(h, c); |
| status = -EFAULT; |
| goto cleanup1; |
| } |
| if (ioc->Request.Type.Direction == XFER_READ) { |
| /* Copy the data out of the buffer we created */ |
| BYTE __user *ptr = ioc->buf; |
| for (i = 0; i < sg_used; i++) { |
| if (copy_to_user(ptr, buff[i], buff_size[i])) { |
| cmd_special_free(h, c); |
| status = -EFAULT; |
| goto cleanup1; |
| } |
| ptr += buff_size[i]; |
| } |
| } |
| cmd_special_free(h, c); |
| status = 0; |
| cleanup1: |
| if (buff) { |
| for (i = 0; i < sg_used; i++) |
| kfree(buff[i]); |
| kfree(buff); |
| } |
| kfree(buff_size); |
| kfree(ioc); |
| return status; |
| } |
| |
| static void check_ioctl_unit_attention(struct ctlr_info *h, |
| struct CommandList *c) |
| { |
| if (c->err_info->CommandStatus == CMD_TARGET_STATUS && |
| c->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) |
| (void) check_for_unit_attention(h, c); |
| } |
| /* |
| * ioctl |
| */ |
| static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg) |
| { |
| struct ctlr_info *h; |
| void __user *argp = (void __user *)arg; |
| |
| h = sdev_to_hba(dev); |
| |
| switch (cmd) { |
| case CCISS_DEREGDISK: |
| case CCISS_REGNEWDISK: |
| case CCISS_REGNEWD: |
| hpsa_scan_start(h->scsi_host); |
| return 0; |
| case CCISS_GETPCIINFO: |
| return hpsa_getpciinfo_ioctl(h, argp); |
| case CCISS_GETDRIVVER: |
| return hpsa_getdrivver_ioctl(h, argp); |
| case CCISS_PASSTHRU: |
| return hpsa_passthru_ioctl(h, argp); |
| case CCISS_BIG_PASSTHRU: |
| return hpsa_big_passthru_ioctl(h, argp); |
| default: |
| return -ENOTTY; |
| } |
| } |
| |
| static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, |
| void *buff, size_t size, u8 page_code, unsigned char *scsi3addr, |
| int cmd_type) |
| { |
| int pci_dir = XFER_NONE; |
| |
| c->cmd_type = CMD_IOCTL_PEND; |
| c->Header.ReplyQueue = 0; |
| if (buff != NULL && size > 0) { |
| c->Header.SGList = 1; |
| c->Header.SGTotal = 1; |
| } else { |
| c->Header.SGList = 0; |
| c->Header.SGTotal = 0; |
| } |
| c->Header.Tag.lower = c->busaddr; |
| memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8); |
| |
| c->Request.Type.Type = cmd_type; |
| if (cmd_type == TYPE_CMD) { |
| switch (cmd) { |
| case HPSA_INQUIRY: |
| /* are we trying to read a vital product page */ |
| if (page_code != 0) { |
| c->Request.CDB[1] = 0x01; |
| c->Request.CDB[2] = page_code; |
| } |
| c->Request.CDBLen = 6; |
| c->Request.Type.Attribute = ATTR_SIMPLE; |
| c->Request.Type.Direction = XFER_READ; |
| c->Request.Timeout = 0; |
| c->Request.CDB[0] = HPSA_INQUIRY; |
| c->Request.CDB[4] = size & 0xFF; |
| break; |
| case HPSA_REPORT_LOG: |
| case HPSA_REPORT_PHYS: |
| /* Talking to controller so It's a physical command |
| mode = 00 target = 0. Nothing to write. |
| */ |
| c->Request.CDBLen = 12; |
| c->Request.Type.Attribute = ATTR_SIMPLE; |
| c->Request.Type.Direction = XFER_READ; |
| c->Request.Timeout = 0; |
| c->Request.CDB[0] = cmd; |
| c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */ |
| c->Request.CDB[7] = (size >> 16) & 0xFF; |
| c->Request.CDB[8] = (size >> 8) & 0xFF; |
| c->Request.CDB[9] = size & 0xFF; |
| break; |
| case HPSA_CACHE_FLUSH: |
| c->Request.CDBLen = 12; |
| c->Request.Type.Attribute = ATTR_SIMPLE; |
| c->Request.Type.Direction = XFER_WRITE; |
| c->Request.Timeout = 0; |
| c->Request.CDB[0] = BMIC_WRITE; |
| c->Request.CDB[6] = BMIC_CACHE_FLUSH; |
| break; |
| case TEST_UNIT_READY: |
| c->Request.CDBLen = 6; |
| c->Request.Type.Attribute = ATTR_SIMPLE; |
| c->Request.Type.Direction = XFER_NONE; |
| c->Request.Timeout = 0; |
| break; |
| default: |
| dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd); |
| BUG(); |
| return; |
| } |
| } else if (cmd_type == TYPE_MSG) { |
| switch (cmd) { |
| |
| case HPSA_DEVICE_RESET_MSG: |
| c->Request.CDBLen = 16; |
| c->Request.Type.Type = 1; /* It is a MSG not a CMD */ |
| c->Request.Type.Attribute = ATTR_SIMPLE; |
| c->Request.Type.Direction = XFER_NONE; |
| c->Request.Timeout = 0; /* Don't time out */ |
| c->Request.CDB[0] = 0x01; /* RESET_MSG is 0x01 */ |
| c->Request.CDB[1] = 0x03; /* Reset target above */ |
| /* If bytes 4-7 are zero, it means reset the */ |
| /* LunID device */ |
| c->Request.CDB[4] = 0x00; |
| c->Request.CDB[5] = 0x00; |
| c->Request.CDB[6] = 0x00; |
| c->Request.CDB[7] = 0x00; |
| break; |
| |
| default: |
| dev_warn(&h->pdev->dev, "unknown message type %d\n", |
| cmd); |
| BUG(); |
| } |
| } else { |
| dev_warn(&h->pdev->dev, "unknown command type %d\n", cmd_type); |
| BUG(); |
| } |
| |
| switch (c->Request.Type.Direction) { |
| case XFER_READ: |
| pci_dir = PCI_DMA_FROMDEVICE; |
| break; |
| case XFER_WRITE: |
| pci_dir = PCI_DMA_TODEVICE; |
| break; |
| case XFER_NONE: |
| pci_dir = PCI_DMA_NONE; |
| break; |
| default: |
| pci_dir = PCI_DMA_BIDIRECTIONAL; |
| } |
| |
| hpsa_map_one(h->pdev, c, buff, size, pci_dir); |
| |
| return; |
| } |
| |
| /* |
| * Map (physical) PCI mem into (virtual) kernel space |
| */ |
| static void __iomem *remap_pci_mem(ulong base, ulong size) |
| { |
| ulong page_base = ((ulong) base) & PAGE_MASK; |
| ulong page_offs = ((ulong) base) - page_base; |
| void __iomem *page_remapped = ioremap(page_base, page_offs + size); |
| |
| return page_remapped ? (page_remapped + page_offs) : NULL; |
| } |
| |
| /* Takes cmds off the submission queue and sends them to the hardware, |
| * then puts them on the queue of cmds waiting for completion. |
| */ |
| static void start_io(struct ctlr_info *h) |
| { |
| struct CommandList *c; |
| |
| while (!hlist_empty(&h->reqQ)) { |
| c = hlist_entry(h->reqQ.first, struct CommandList, list); |
| /* can't do anything if fifo is full */ |
| if ((h->access.fifo_full(h))) { |
| dev_warn(&h->pdev->dev, "fifo full\n"); |
| break; |
| } |
| |
| /* Get the first entry from the Request Q */ |
| removeQ(c); |
| h->Qdepth--; |
<
|