/*
 * Copyright 2012-2015 Freescale Semiconductor, Inc.
 * Copyright 2011 Linaro Ltd.
 * Copyright 2017 NXP.
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	aliases {
		mxcfb0 = &mxcfb1;
		mxcfb1 = &mxcfb2;
		mxcfb2 = &mxcfb3;
		mxcfb3 = &mxcfb4;
	};

	gpio-keys {
		compatible = "gpio-keys1";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpio_keys>;

		home {
			label = "Home";
			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
			gpio-key,wakeup;
			linux,code = <KEY_HOME>;
		};

		back {
			label = "Back";
			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
			gpio-key,wakeup;
			linux,code = <KEY_BACK>;
		};

		program {
			label = "Program";
			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
			gpio-key,wakeup;
			linux,code = <KEY_PROGRAM>;
		};

		volume-up {
			label = "Volume Up";
			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
			gpio-key,wakeup;
			linux,code = <KEY_VOLUMEUP>;
		};

		volume-down {
			label = "Volume Down";
			gpios = <&gpio5 14 GPIO_ACTIVE_LOW>;
			gpio-key,wakeup;
			linux,code = <KEY_VOLUMEDOWN>;
		};
	};

	memory:	memory {
		reg = <0x10000000 0x80000000>;
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpio_leds>;

		user {
			label = "debug";
			gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
		};
	};

	clocks {
		codec_osc: anaclk2 {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <24576000>;
		};
	};

	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		reg_audio: regulator@0 {
			compatible = "regulator-fixed";
			reg = <0>;
			regulator-name = "cs42888_supply";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
		};

		reg_3p3v: 3p3v {
			compatible = "regulator-fixed";
			regulator-name = "3P3V";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
		};

		reg_usb_h1_vbus: regulator@1 {
			compatible = "regulator-fixed";
			reg = <1>;
			regulator-name = "usb_h1_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
			enable-active-high;
		};

		reg_usb_otg_vbus: regulator@2 {
			compatible = "regulator-fixed";
			reg = <2>;
			regulator-name = "usb_otg_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
			enable-active-high;
		};

		reg_si4763_vio1: regulator@3 {
			compatible = "regulator-fixed";
			reg = <3>;
			regulator-name = "vio1";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
		};

		reg_si4763_vio2: regulator@4 {
			compatible = "regulator-fixed";
			reg = <4>;
			regulator-name = "vio2";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
		};

		reg_si4763_vd: regulator@5 {
			compatible = "regulator-fixed";
			reg = <5>;
			regulator-name = "vd";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
		};

		reg_si4763_va: regulator@6 {
			compatible = "regulator-fixed";
			reg = <6>;
			regulator-name = "va";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			regulator-always-on;
		};

		reg_sd3_vmmc: regulator@7 {
			compatible = "regulator-fixed";
			regulator-name = "P3V3_SDa_SWITCHED";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
			enable-active-high;
			off-on-delay = <20000>;
			/* remove below line to enable this regulator */
			status = "disabled";
		};

		reg_can_en: regulator@8 {
			compatible = "regulator-fixed";
			reg = <8>;
			regulator-name = "can-en";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			gpio = <&max7310_b 6 GPIO_ACTIVE_HIGH>;
			enable-active-high;
		};

		reg_can_stby: regulator@9 {
			compatible = "regulator-fixed";
			reg = <9>;
			regulator-name = "can-stby";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
			enable-active-high;
			vin-supply = <&reg_can_en>;
		};
	};

	hannstar_cabc {
		compatible = "hannstar,cabc";

		lvds_share {
			gpios = <&max7310_a 0 GPIO_ACTIVE_HIGH>;
		};
	};

	sound-hdmi {
		compatible = "fsl,imx6q-audio-hdmi",
			     "fsl,imx-audio-hdmi";
		model = "imx-audio-hdmi";
		hdmi-controller = <&hdmi_audio>;
	};

	mxcfb1: fb@0 {
		compatible = "fsl,mxc_sdc_fb";
		disp_dev = "ldb";
		interface_pix_fmt = "RGB666";
		default_bpp = <16>;
		int_clk = <0>;
		late_init = <0>;
		status = "disabled";
	};

	mxcfb2: fb@1 {
		compatible = "fsl,mxc_sdc_fb";
		disp_dev = "hdmi";
		interface_pix_fmt = "RGB24";
		mode_str ="1920x1080M@60";
		default_bpp = <24>;
		int_clk = <0>;
		late_init = <0>;
		status = "disabled";
	};

	mxcfb3: fb@2 {
		compatible = "fsl,mxc_sdc_fb";
		disp_dev = "lcd";
		interface_pix_fmt = "RGB565";
		mode_str ="CLAA-WVGA";
		default_bpp = <16>;
		int_clk = <0>;
		late_init = <0>;
		status = "disabled";
	};

	mxcfb4: fb@3 {
		compatible = "fsl,mxc_sdc_fb";
		disp_dev = "ldb";
		interface_pix_fmt = "RGB666";
		default_bpp = <16>;
		int_clk = <0>;
		late_init = <0>;
		status = "disabled";
	};

	clocks {
		codec_osc: anaclk2 {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <24576000>;
		};
	};

	sound-cs42888 {
		compatible = "fsl,imx6-sabreauto-cs42888",
				"fsl,imx-audio-cs42888";
		model = "imx-cs42888";
		esai-controller = <&esai>;
		asrc-controller = <&asrc>;
		audio-codec = <&codec>;
	};

	sound-fm {
		compatible = "fsl,imx-audio-si476x",
			   "fsl,imx-tuner-si476x";
		model = "imx-radio-si4763";
		ssi-controller = <&ssi2>;
		fm-controller = <&si476x_codec>;
		mux-int-port = <2>;
		mux-ext-port = <5>;
	};

	sound-spdif {
		compatible = "fsl,imx-audio-spdif",
			   "fsl,imx-sabreauto-spdif";
		model = "imx-spdif";
		spdif-controller = <&spdif>;
		spdif-in;
	};

	backlight {
		compatible = "pwm-backlight";
		pwms = <&pwm3 0 5000000>;
		brightness-levels = <0 4 8 16 32 64 128 255>;
		default-brightness-level = <7>;
		status = "okay";
	};

	v4l2_cap_0 {
		compatible = "fsl,imx6q-v4l2-capture";
		ipu_id = <0>;
		csi_id = <0>;
		mclk_source = <0>;
		status = "okay";
	};

	v4l2_out {
		compatible = "fsl,mxc_v4l2_output";
		status = "okay";
	};
};

&audmux {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_audmux>;
	status = "okay";
};

&clks {
	assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
			  <&clks IMX6QDL_PLL4_BYPASS>,
			  <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
			  <&clks IMX6QDL_CLK_PLL4_POST_DIV>;
	assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
				 <&clks IMX6QDL_PLL4_BYPASS_SRC>,
				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
	assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
};

&dcic1 {
	dcic_id = <0>;
	dcic_mux = "dcic-hdmi";
	status = "okay";
};

&dcic2 {
	dcic_id = <1>;
	dcic_mux = "dcic-lvds0";
	status = "okay";
};

&ecspi1 {
	fsl,spi-num-chipselects = <1>;
	cs-gpios = <&gpio3 19 0>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
	status = "disabled"; /* pin conflict with WEIM NOR */

	flash: m25p80@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "st,m25p32", "jedec,spi-nor";
		spi-max-frequency = <20000000>;
		reg = <0>;
	};
};

&esai {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_esai>;
	assigned-clocks = <&clks IMX6QDL_CLK_ESAI_SEL>,
			  <&clks IMX6QDL_CLK_ESAI_EXTAL>;
	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
	assigned-clock-rates = <0>, <24576000>;
	status = "okay";
};

&fec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet>;
	phy-mode = "rgmii";
	fsl,magic-packet;
	fsl,err006687-workaround-present;
	status = "okay";
};

&can1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan1>;
	pinctrl-assert-gpios = <&max7310_b 3 GPIO_ACTIVE_HIGH>; /* TX */
	xceiver-supply = <&reg_can_stby>;
	status = "disabled"; /* pin conflict with fec */
};

&can2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan2>;
	xceiver-supply = <&reg_can_stby>;
	status = "okay";
};

&gpmi {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_gpmi_nand>;
	status = "disabled"; /* pin conflict with uart3 */
	nand-on-flash-bbt;
};

&hdmi_audio {
	status = "okay";
};

&hdmi_cec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hdmi_cec>;
	status = "okay";
};

&hdmi_core {
	ipu_id = <0>;
	disp_id = <1>;
	status = "okay";
};

&hdmi_video {
	fsl,phy_reg_vlev = <0x0294>;
	fsl,phy_reg_cksymtx = <0x800d>;
	status = "okay";
};

&i2c2 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2>;
	status = "okay";

	egalax_ts@04 {
		compatible = "eeti,egalax_ts";
		reg = <0x04>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_egalax_int>;
		interrupt-parent = <&gpio2>;
		interrupts = <28 2>;
		wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
	};

	pmic: pfuze100@08 {
		compatible = "fsl,pfuze100";
		reg = <0x08>;

		regulators {
			sw1a_reg: sw1ab {
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <1875000>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <6250>;
			};

			sw1c_reg: sw1c {
				regulator-min-microvolt = <300000>;
				regulator-max-microvolt = <1875000>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <6250>;
			};

			sw2_reg: sw2 {
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
			};

			sw3a_reg: sw3a {
				regulator-min-microvolt = <400000>;
				regulator-max-microvolt = <1975000>;
				regulator-boot-on;
				regulator-always-on;
			};

			sw3b_reg: sw3b {
				regulator-min-microvolt = <400000>;
				regulator-max-microvolt = <1975000>;
				regulator-boot-on;
				regulator-always-on;
			};

			sw4_reg: sw4 {
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			swbst_reg: swbst {
				regulator-min-microvolt = <5000000>;
				regulator-max-microvolt = <5150000>;
			};

			snvs_reg: vsnvs {
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <3000000>;
				regulator-boot-on;
				regulator-always-on;
			};

			vref_reg: vrefddr {
				regulator-boot-on;
				regulator-always-on;
			};

			vgen1_reg: vgen1 {
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1550000>;
			};

			vgen2_reg: vgen2 {
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1550000>;
			};

			vgen3_reg: vgen3 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
			};

			vgen4_reg: vgen4 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vgen5_reg: vgen5 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vgen6_reg: vgen6 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};
		};
	};

	hdmi_edid: edid@50 {
		compatible = "fsl,imx6-hdmi-i2c";
		reg = <0x50>;
	};

	codec: cs42888@48 {
		compatible = "cirrus,cs42888";
		reg = <0x48>;
		clocks = <&codec_osc>;
		clock-names = "mclk";
		VA-supply = <&reg_audio>;
		VD-supply = <&reg_audio>;
		VLS-supply = <&reg_audio>;
		VLC-supply = <&reg_audio>;
        };

	si4763: si4763@63 {
		compatible = "si4761";
		reg = <0x63>;
		va-supply = <&reg_si4763_va>;
		vd-supply = <&reg_si4763_vd>;
		vio1-supply = <&reg_si4763_vio1>;
		vio2-supply = <&reg_si4763_vio2>;
		revision-a10; /* set to default A10 compatible command set */

		si476x_codec: si476x-codec {
			compatible = "si476x-codec";
		};
	};
};

&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c3>;
	status = "okay";

	adv7180: adv7180@21 {
		compatible = "adv,adv7180";
		reg = <0x21>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_ipu1_1>;
		clocks = <&clks IMX6QDL_CLK_CKO>;
		clock-names = "csi_mclk";
		DOVDD-supply = <&reg_3p3v>; /* 3.3v, enabled via 2.8 VGEN6 */
		AVDD-supply = <&reg_3p3v>;  /* 1.8v */
		DVDD-supply = <&reg_3p3v>;  /* 1.8v */
		PVDD-supply = <&reg_3p3v>;  /* 1.8v */
		pwn-gpios = <&max7310_b 2 0>;
		csi_id = <0>;
		mclk = <24000000>;
		mclk_source = <0>;
		cvbs = <1>;
	};

	isl29023@44 {
		compatible = "fsl,isl29023";
		reg = <0x44>;
		rext = <499>;
		interrupt-parent = <&gpio5>;
		interrupts = <17 2>;
	};

	max7310_a: gpio@30 {
		compatible = "maxim,max7310";
		reg = <0x30>;
		gpio-controller;
		#gpio-cells = <2>;
	};

	max7310_b: gpio@32 {
		compatible = "maxim,max7310";
		reg = <0x32>;
		gpio-controller;
		#gpio-cells = <2>;
	};

	max7310_c: gpio@34 {
		compatible = "maxim,max7310";
		reg = <0x34>;
		gpio-controller;
		#gpio-cells = <2>;
	};

	mag3110@0e {
		compatible = "fsl,mag3110";
		reg = <0x0e>;
		position = <2>;
		interrupt-parent = <&gpio2>;
		interrupts = <29 1>;
	};

	mma8451@1c {
		compatible = "fsl,mma8451";
		reg = <0x1c>;
		position = <7>;
		interrupt-parent = <&gpio6>;
		interrupts = <31 8>;
		interrupt-route = <1>;
	};
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hog>;

	imx6qdl-sabreauto {
                pinctrl_audmux: audmux {
                        fsl,pins = <
                                MX6QDL_PAD_DISP0_DAT16__AUD5_TXC  0x130b0
                                MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x130b0
                                MX6QDL_PAD_DISP0_DAT19__AUD5_RXD  0x130b0
                        >;
                };

		pinctrl_hog: hoggrp {
			fsl,pins = <
				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1f059
				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
				MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
				MX6QDL_PAD_EIM_A24__GPIO5_IO04   0x80000000
				MX6QDL_PAD_SD2_DAT0__GPIO1_IO15  0x80000000
				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x80000000
				MX6QDL_PAD_EIM_EB1__GPIO2_IO29	0x80000000
				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x80000000
				MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x80000000
				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x17059
				MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x17059
			>;
		};

		pinctrl_ecspi1: ecspi1grp {
			fsl,pins = <
				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
			>;
		};

		pinctrl_ecspi1_cs: ecspi1cs {
			fsl,pins = <
				MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
			>;
		};

		pinctrl_egalax_int: egalax_intgrp {
			fsl,pins = <
				MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x80000000
			>;
		};

		pinctrl_enet: enetgrp {
			fsl,pins = <
				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
			>;
		};

		pinctrl_enet_irq: enetirqgrp {
			fsl,pins = <
				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
			>;
		};

		pinctrl_esai: esaigrp {
			fsl,pins = <
				MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
				MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS    0x1b030
				MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
				MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3     0x1b030
				MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1  0x1b030
				MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0   0x1b030
				MX6QDL_PAD_GPIO_17__ESAI_TX0        0x1b030
				MX6QDL_PAD_NANDF_CS3__ESAI_TX1      0x1b030
				MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK   0x1b030
				MX6QDL_PAD_GPIO_9__ESAI_RX_FS       0x1b030
			>;
		};

		pinctrl_flexcan1: flexcan1grp {
			fsl,pins = <
				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x17059
				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x17059
			>;
		};

		pinctrl_flexcan2: flexcan2grp {
			fsl,pins = <
				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x17059
				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x17059
			>;
		};

		pinctrl_gpio_keys: gpio_keysgrp {
			fsl,pins = <
				MX6QDL_PAD_SD2_CMD__GPIO1_IO11	0x1b0b0
				MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
				MX6QDL_PAD_SD4_DAT7__GPIO2_IO15	0x1b0b0
				MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0
			>;
		};

		pinctrl_gpio_leds: gpioledsgrp {
			fsl,pins = <
				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x80000000
			>;
		};

		pinctrl_gpmi_nand: gpminandgrp {
			fsl,pins = <
				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
			>;
		};

		pinctrl_i2c2: i2c2grp {
			fsl,pins = <
				MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
			>;
		};

		pinctrl_ipu1_1: ipu1grp-1 { /* parallel port 16-bit */
			fsl,pins = <
				MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04   0x80000000
				MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05   0x80000000
				MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06   0x80000000
				MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07   0x80000000
				MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08   0x80000000
				MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09   0x80000000
				MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10  0x80000000
				MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11  0x80000000
				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0x80000000
				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0x80000000
				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0x80000000
				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0x80000000
				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0x80000000
				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0x80000000
				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0x80000000
				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0x80000000
				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x80000000
				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0x80000000
				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0x80000000
			>;
		};

		pinctrl_i2c3: i2c3grp {
			fsl,pins = <
				MX6QDL_PAD_GPIO_3__I2C3_SCL  0x4001b8b1
				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
			>;
		};

		pinctrl_mlb: mlb {
			fsl,pins = <
				MX6QDL_PAD_ENET_TXD1__MLB_CLK 0x80000000
				MX6QDL_PAD_GPIO_6__MLB_SIG    0x80000000
				MX6QDL_PAD_GPIO_2__MLB_DATA   0x80000000
			>;
		};

		pinctrl_pwm3: pwm1grp {
			fsl,pins = <
				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
			>;
		};

		pinctrl_spdif: spdifgrp {
			fsl,pins = <
				MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
			>;
		};

		pinctrl_uart3_1: uart3grp-1 {
			fsl,pins = <
				MX6QDL_PAD_SD4_CLK__UART3_RX_DATA	0x1b0b1
				MX6QDL_PAD_SD4_CMD__UART3_TX_DATA	0x1b0b1
				MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
				MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
			>;
		};

		pinctrl_uart3dte_1: uart3dtegrp-1 {
			fsl,pins = <
				MX6QDL_PAD_SD4_CLK__UART3_TX_DATA	0x1b0b1
				MX6QDL_PAD_SD4_CMD__UART3_RX_DATA	0x1b0b1
				MX6QDL_PAD_EIM_D30__UART3_RTS_B		0x1b0b1
				MX6QDL_PAD_EIM_EB3__UART3_CTS_B		0x1b0b1
			>;
		};

		pinctrl_uart4: uart4grp {
			fsl,pins = <
				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
			>;
		};

		pinctrl_usbotg: usbotggrp {
			fsl,pins = <
				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
			>;
		};

		pinctrl_usdhc1: usdhc1grp {
			fsl,pins = <
				MX6QDL_PAD_SD1_CMD__SD1_CMD             0x17071
				MX6QDL_PAD_SD1_CLK__SD1_CLK             0x10071
				MX6QDL_PAD_SD1_DAT0__SD1_DATA0          0x17071
				MX6QDL_PAD_SD1_DAT1__SD1_DATA1          0x17071
				MX6QDL_PAD_SD1_DAT2__SD1_DATA2          0x17071
				MX6QDL_PAD_SD1_DAT3__SD1_DATA3          0x17071
			>;
		};

		pinctrl_usdhc3: usdhc3grp {
			fsl,pins = <
				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
			>;
		};

		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
			fsl,pins = <
				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
			>;
		};

		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
			fsl,pins = <
				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
			>;
		};

		pinctrl_weim_cs0: weimcs0grp {
			fsl,pins = <
				MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
			>;
		};

		pinctrl_weim_nor: weimnorgrp {
			fsl,pins = <
				MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
				MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
				MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B		0xb060
				MX6QDL_PAD_EIM_D16__EIM_DATA16		0x1b0b0
				MX6QDL_PAD_EIM_D17__EIM_DATA17		0x1b0b0
				MX6QDL_PAD_EIM_D18__EIM_DATA18		0x1b0b0
				MX6QDL_PAD_EIM_D19__EIM_DATA19		0x1b0b0
				MX6QDL_PAD_EIM_D20__EIM_DATA20		0x1b0b0
				MX6QDL_PAD_EIM_D21__EIM_DATA21		0x1b0b0
				MX6QDL_PAD_EIM_D22__EIM_DATA22		0x1b0b0
				MX6QDL_PAD_EIM_D23__EIM_DATA23		0x1b0b0
				MX6QDL_PAD_EIM_D24__EIM_DATA24		0x1b0b0
				MX6QDL_PAD_EIM_D25__EIM_DATA25		0x1b0b0
				MX6QDL_PAD_EIM_D26__EIM_DATA26		0x1b0b0
				MX6QDL_PAD_EIM_D27__EIM_DATA27		0x1b0b0
				MX6QDL_PAD_EIM_D28__EIM_DATA28		0x1b0b0
				MX6QDL_PAD_EIM_D29__EIM_DATA29		0x1b0b0
				MX6QDL_PAD_EIM_D30__EIM_DATA30		0x1b0b0
				MX6QDL_PAD_EIM_D31__EIM_DATA31		0x1b0b0
				MX6QDL_PAD_EIM_A23__EIM_ADDR23		0xb0b1
				MX6QDL_PAD_EIM_A22__EIM_ADDR22		0xb0b1
				MX6QDL_PAD_EIM_A21__EIM_ADDR21		0xb0b1
				MX6QDL_PAD_EIM_A20__EIM_ADDR20		0xb0b1
				MX6QDL_PAD_EIM_A19__EIM_ADDR19		0xb0b1
				MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0b1
				MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0b1
				MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0b1
				MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
				MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
				MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
				MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
				MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
				MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
				MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
				MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
				MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
				MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
				MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
				MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
				MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
				MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
				MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
				MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
			>;
		};

		pinctrl_hdmi_cec: hdmicecgrp {
			fsl,pins = <
				MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0
			>;
		};
	};
};

&ldb {
	status = "okay";

	lvds-channel@0 {
		fsl,data-mapping = "spwg";
		fsl,data-width = <18>;
		primary;
		status = "okay";

		display-timings {
			native-mode = <&timing0>;
			timing0: hsd100pxn1 {
				clock-frequency = <65000000>;
				hactive = <1024>;
				vactive = <768>;
				hback-porch = <220>;
				hfront-porch = <40>;
				vback-porch = <21>;
				vfront-porch = <7>;
				hsync-len = <60>;
				vsync-len = <10>;
			};
		};
	};

	lvds-channel@1 {
		fsl,data-mapping = "spwg";
		fsl,data-width = <18>;
		status = "okay";

		display-timings {
			native-mode = <&timing1>;
			timing1: hsd100pxn1 {
				clock-frequency = <65000000>;
				hactive = <1024>;
				vactive = <768>;
				hback-porch = <220>;
				hfront-porch = <40>;
				vback-porch = <21>;
				vfront-porch = <7>;
				hsync-len = <60>;
				vsync-len = <10>;
			};
		};
	};
};

&mlb {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_mlb>;
	status = "okay";
};

&pwm3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm3>;
	status = "okay";
};

&pcie {
	status = "okay";
};

&spdif {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_spdif>;
	assigned-clocks = <&clks IMX6QDL_CLK_SPDIF_SEL>,
			  <&clks IMX6QDL_CLK_SPDIF_PODF>;
	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_PFD3_454M>;
	assigned-clock-rates = <0>, <227368421>;
	status = "okay";
};

&snvs_poweroff {
	status = "okay";
};

&ssi2 {
	assigned-clocks = <&clks IMX6QDL_CLK_SSI2_SEL>;
	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
	assigned-clock-rates = <0>;
	fsl,mode = "i2s-master";
	status = "okay";
};

&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart3_1>;
	pinctrl-assert-gpios = <&max7310_b 4 GPIO_ACTIVE_HIGH>, /* CTS */
			       <&max7310_c 3 GPIO_ACTIVE_HIGH>; /* RXD and TXD */
	fsl,uart-has-rtscts;
	status = "okay";
	/* for DTE mode, add below change */
	/* fsl,dte-mode; */
	/* pinctrl-0 = <&pinctrl_uart3dte_1>; */
};

&uart4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart4>;
	status = "okay";
};

&usbh1 {
	vbus-supply = <&reg_usb_h1_vbus>;
	status = "okay";
};

&usbotg {
	vbus-supply = <&reg_usb_otg_vbus>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg>;
	srp-disable;
	hnp-disable;
	adp-disable;
	status = "okay";
};

&usdhc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc1>;
	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
	no-1-8-v;
	keep-power-in-suspend;
	enable-sdio-wakeup;
	status = "okay";
};

&usdhc3 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc3>;
	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
	cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
	/*
	 * Due to board issue, we can not use external regulator for card slot
	 * by default since the card power is shared with card detect pullup.
	 * Disabling the vmmc regulator will cause unexpected card detect
	 * interrupts.
	 * HW rework is needed to fix this isssue. Remove R695 first, then you
	 * can open below line to enable the using of external regulator.
	 * Then you will be able to power off the card during suspend. This is
	 * especially needed for a SD3.0 card re-enumeration working on UHS mode
	 * Note: reg_sd3_vmmc is also need to be enabled
	 */
	/* vmmc-supply = <&reg_sd3_vmmc>; */
	keep-power-in-suspend;
	enable-sdio-wakeup;
	status = "okay";
};

&weim {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
	#address-cells = <2>;
	#size-cells = <1>;
	ranges = <0 0 0x08000000 0x08000000>;
	status = "disabled"; /* pin conflict with SPI NOR */

	nor@0,0 {
		compatible = "cfi-flash";
		reg = <0 0 0x02000000>;
		#address-cells = <1>;
		#size-cells = <1>;
		bank-width = <2>;
		fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
				0x0000c000 0x1404a38e 0x00000000>;
	};
};