/*
 * Copyright 2017 NXP
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/* This dts is only for verify USB3 Type-C Connector */

#include "fsl-imx8qm-lpddr4-arm2.dts"

/ {
	imx8qm-pm {
		#address-cells = <1>;
		#size-cells = <0>;

		pd_ptn5150: PD_PTN5150 {
			compatible = "nxp,imx8-pd";
			reg = <SC_R_LAST>;
			#power-domain-cells = <0>;
			#address-cells = <1>;
			#size-cells = <0>;

			pd_ptn5150_io: ptn5150_io {
				reg = <SC_R_BOARD_R0>;
				#power-domain-cells = <0>;
				power-domains =<&pd_ptn5150>;
			};
		};
	};
};


&iomuxc {
	imx8qm-arm2 {
		pinctrl_lpi2c1: lpi2c1grp {
			fsl,pins = <
				SC_P_USB_SS3_TC1_DMA_I2C1_SCL		0xc600004c
				SC_P_USB_SS3_TC3_DMA_I2C1_SDA		0xc600004c
			>;
		};

		pinctrl_ptn5150: ptn5150 {
			fsl,pins = <
				SC_P_SIM0_CLK_LSIO_GPIO0_IO00		0x00000021
			>;
		};
	};
};

&usbotg3 {
	dr_mode = "otg";
	extcon = <&typec_ptn5150>;
	status = "okay";
};

&i2c1 {
	#address-cells = <1>;
	#size-cells = <0>;
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lpi2c1>;
	status = "okay";

	typec_ptn5150: typec@3d {
		compatible = "nxp,ptn5150";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_ptn5150>;
		reg = <0x3d>;
		power-domains = <&pd_ptn5150_io>;
		connect-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
	};

	pca9557_a: gpio@18 {
		status = "disabled";
	};

	pca9557_b: gpio@19 {
		status = "disabled";
	};

	pca9557_c: gpio@1b {
		status = "disabled";
	};

	pca9557_d: gpio@1f {
		status = "disabled";
	};

	fxas2100x@20 {
		status = "disabled";
	};

	fxos8700@1d {
		status = "disabled";
	};

	isl29023@44 {
		status = "disabled";
	};

	mpl3115@60 {
		status = "disabled";
	};
};