# bcmdhd
#####################
# SDIO Basic feature
#####################

DHDCFLAGS += -Wall -Wstrict-prototypes -Dlinux -DLINUX -DBCMDRIVER            \
	-DBCMDONGLEHOST -DUNRELEASEDCHIP -DBCMDMA32 -DBCMFILEIMAGE            \
	-DDHDTHREAD -DSHOW_EVENTS -DBCMDBG -DWLP2P                            \
	-DWIFI_ACT_FRAME -DARP_OFFLOAD_SUPPORT                                \
	-DKEEP_ALIVE -DCSCAN -DPKT_FILTER_SUPPORT                             \
	-DEMBEDDED_PLATFORM -DPNO_SUPPORT                                     \
	-DDHD_DONOT_FORWARD_BCMEVENT_AS_NETWORK_PKT                           \
	-DCUSTOMER_HW2 -DGET_CUSTOM_MAC_ENABLE

#################
# Common feature
#################
DHDCFLAGS += -DWL_CFG80211
# Print out kernel panic point of file and line info when assertion happened
DHDCFLAGS += -DBCMASSERT_LOG

# keepalive
DHDCFLAGS += -DCUSTOM_KEEP_ALIVE_SETTING=28000

DHDCFLAGS += -DVSDB
DHDCFLAGS += -DPROP_TXSTATUS

# For p2p connection issue
DHDCFLAGS += -DWL_SCB_TIMEOUT=10

# TDLS enable
DHDCFLAGS += -DWLTDLS -DWLTDLS_AUTO_ENABLE
# For TDLS tear down inactive time 40 sec
DHDCFLAGS += -DCUSTOM_TDLS_IDLE_MODE_SETTING=40000
# for TDLS RSSI HIGH for establishing TDLS link
DHDCFLAGS += -DCUSTOM_TDLS_RSSI_THRESHOLD_HIGH=-60
# for TDLS RSSI HIGH for tearing down TDLS link
DHDCFLAGS += -DCUSTOM_TDLS_RSSI_THRESHOLD_LOW=-70

# Roaming
DHDCFLAGS += -DROAM_AP_ENV_DETECTION
DHDCFLAGS += -DROAM_ENABLE -DROAM_CHANNEL_CACHE -DROAM_API
DHDCFLAGS += -DENABLE_FW_ROAM_SUSPEND
# Roaming trigger
DHDCFLAGS += -DCUSTOM_ROAM_TRIGGER_SETTING=-75
DHDCFLAGS += -DCUSTOM_ROAM_DELTA_SETTING=10
# Set PM 2 always regardless suspend/resume
DHDCFLAGS += -DSUPPORT_PM2_ONLY

# For special PNO Event keep wake lock for 10sec
DHDCFLAGS += -DCUSTOM_PNO_EVENT_LOCK_xTIME=10
DHDCFLAGS += -DMIRACAST_AMPDU_SIZE=8

# Early suspend
DHDCFLAGS += -DDHD_USE_EARLYSUSPEND

# For Scan result patch
DHDCFLAGS += -DESCAN_RESULT_PATCH

# For Static Buffer
ifeq ($(CONFIG_BROADCOM_WIFI_RESERVED_MEM),y)
  DHDCFLAGS += -DCONFIG_DHD_USE_STATIC_BUF
  DHDCFLAGS += -DENHANCED_STATIC_BUF
  DHDCFLAGS += -DSTATIC_WL_PRIV_STRUCT
endif
ifneq ($(CONFIG_DHD_USE_SCHED_SCAN),)
DHDCFLAGS += -DWL_SCHED_SCAN
endif

# Ioctl timeout 5000ms
DHDCFLAGS += -DIOCTL_RESP_TIMEOUT=5000

# Prevent rx thread monopolize
DHDCFLAGS += -DWAIT_DEQUEUE

# Config PM Control
DHDCFLAGS += -DCONFIG_CONTROL_PM

# idle count
DHDCFLAGS += -DDHD_USE_IDLECOUNT

# Wi-Fi Direct
DHDCFLAGS += -DWL_CFG80211_VSDB_PRIORITIZE_SCAN_REQUEST
DHDCFLAGS += -DWL_CFG80211_STA_EVENT
DHDCFLAGS += -DWL_IFACE_COMB_NUM_CHANNELS
# DHDCFLAGS += -DWL_ENABLE_P2P_IF

# For APSTA virtual interface
DHDCFLAGS += -DWL_VIRTUAL_APSTA

##########################
# platform type
# imx: NXP iMX platform
##########################
DHDPLATFORM ?= imx
ifeq ($(DHDPLATFORM), imx)
  DHDCFLAGS += -DCONFIG_DTS -DCUSTOMER_IMX
else
  # XXX Disable for NXP-iMX platforms 
  # SKB TAILPAD to avoid out of boundary memory access
  DHDCFLAGS += -DDHDENABLE_TAILPAD
endif

##########################
# driver type
# m: module type driver
# y: built-in type driver
##########################
#DRIVER_TYPE ?= y

ifeq ($(CONFIG_BCMDHD_SDIO), y)
  DHDCFLAGS += -DENABLE_INSMOD_NO_FW_LOAD
else
  DHDCFLAGS += -DNO_SDIO_RESET
endif

#########################
# Chip dependent feature
#########################
ifneq ($(CONFIG_BCM4354),)
  DHDCFLAGS += -DBCM4354_CHIP -DHW_OOB

# tput enhancement
  DHDTXGLOM ?= y
  MAX_TXGLOM ?= 40
  DHDCFLAGS += -DUSE_DYNAMIC_F2_BLKSIZE -DDYNAMIC_F2_BLKSIZE_FOR_NONLEGACY=128
  DHDCFLAGS += -DDHDTCPACK_SUPPRESS
  DHDCFLAGS += -DUSE_WL_TXBF
  DHDCFLAGS += -DUSE_WL_FRAMEBURST
  DHDCFLAGS += -DRXFRAME_THREAD
  DHDCFLAGS += -DREPEAT_READFRAME
  DHDCFLAGS += -DCUSTOM_AMPDU_BA_WSIZE=64
  DHDCFLAGS += -DCUSTOM_DPC_CPUCORE=0
#  DHDCFLAGS += -DPROP_TXSTATUS_VSDB
  DHDCFLAGS += -DMAX_HDR_READ=128
  DHDCFLAGS += -DDHD_FIRSTREAD=128
  DHDCFLAGS += -DCUSTOM_AMPDU_MPDU=16

# New Features
  DHDCFLAGS += -DWL11U -DPMF
  DHDCFLAGS += -DDHD_ENABLE_LPC
  DHDCFLAGS += -DSAR_SUPPORT
  DHDCFLAGS += -DCUSTOM_PSPRETEND_THR=30
endif

ifneq ($(CONFIG_BCM4339),)
  DHDCFLAGS += -DBCM4339_CHIP -DHW_OOB

  # tput enhancement
  DHDTXGLOM ?= y
  DHDCFLAGS += -DUSE_DYNAMIC_F2_BLKSIZE -DDYNAMIC_F2_BLKSIZE_FOR_NONLEGACY=128
  DHDCFLAGS += -DDHDTCPACK_SUPPRESS
  DHDCFLAGS += -DUSE_WL_TXBF
  DHDCFLAGS += -DUSE_WL_FRAMEBURST
  DHDCFLAGS += -DRXFRAME_THREAD
  DHDCFLAGS += -DCUSTOM_AMPDU_BA_WSIZE=64
  DHDCFLAGS += -DCUSTOM_DPC_CPUCORE=0
#  DHDCFLAGS += -DPROP_TXSTATUS_VSDB

  # New Features
  DHDCFLAGS += -DWL11U
  DHDCFLAGS += -DDHD_ENABLE_LPC
  DHDCFLAGS += -DCUSTOM_PSPRETEND_THR=30
endif

##########################
# SDIO TX glomming
# y: enable
# n: disable
##########################
DHDTXGLOM ?= n
ifeq ($(DHDTXGLOM), y)
  MAX_TXGLOM ?= 32
  DHDCFLAGS += -DCUSTOM_GLOM_SETTING=8 -DCUSTOM_RXCHAIN=1
  DHDCFLAGS += -DBCMSDIOH_TXGLOM -DCUSTOM_TXGLOM=1 -DBCMSDIOH_TXGLOM_HIGHSPEED
  DHDCFLAGS += -DCUSTOM_MAX_TXGLOM_SIZE=$(MAX_TXGLOM)
endif

# Murata: need the following define to handle BCM43340 edge interrupt (vs level interrupt on other chipsets).
# Define is in imx_v7_defconfig.
ifeq ($(CONFIG_BCM43340),)
  DHDCFLAGS += -DHW_OOB
endif

ifneq ($(CONFIG_BCMDHD_SDIO),)
  DHDCFLAGS += -DBDC -DOOB_INTR_ONLY -DDHD_BCMEVENTS -DMMC_SDIO_ABORT -DOOB_PARAM
  DHDCFLAGS += -DBCMSDIO -DBCMLXSDMMC -DUSE_SDIOFIFO_IOVAR -DDHD_VERSION_NO_DATE_TIME
endif

ifneq ($(CONFIG_BCMDHD_PCIE),)
  DHDCFLAGS += -DPCIE_FULL_DONGLE -DBCMPCIE -DCUSTOM_DPC_PRIO_SETTING=-1
endif

#EXTRA_LDFLAGS += --strip-debug

EXTRA_CFLAGS += $(DHDCFLAGS) -DDHD_DEBUG
EXTRA_CFLAGS += -DSRCBASE=\"$(src)\"
EXTRA_CFLAGS += -I$(src)/include/ -I$(src)/
KBUILD_CFLAGS += -I$(LINUXDIR)/include -I$(shell pwd)

DHDOFILES := dhd_pno.o dhd_common.o dhd_ip.o dhd_custom_gpio.o \
	dhd_linux.o dhd_linux_sched.o dhd_cfg80211.o dhd_linux_wq.o aiutils.o bcmevent.o \
	bcmutils.o bcmwifi_channels.o hndpmu.o linux_osl.o sbutils.o siutils.o \
	wl_android.o wl_cfg80211.o wl_cfgp2p.o wl_cfg_btcoex.o wldev_common.o wl_linux_mon.o  \
	dhd_linux_platdev.o dhd_pno.o dhd_linux_wq.o wl_cfg_btcoex.o wl_cfgvendor.o

ifneq ($(CONFIG_BCMDHD_SDIO),)
  DHDOFILES += bcmsdh.o bcmsdh_linux.o bcmsdh_sdmmc.o bcmsdh_sdmmc_linux.o
  DHDOFILES += dhd_cdc.o dhd_wlfc.o dhd_sdio.o
endif

ifneq ($(CONFIG_BCMDHD_PCIE),)
  DHDOFILES += dhd_pcie.o dhd_pcie_linux.o dhd_msgbuf.o dhd_log.o circularbuf.o
endif

bcmdhd-objs := $(DHDOFILES)
obj-$(CONFIG_BCMDHD_SDIO)   += bcmdhd.o

all:
	@echo "$(MAKE) --no-print-directory -C $(KDIR) SUBDIRS=$(CURDIR) modules"
	@$(MAKE) --no-print-directory -C $(KDIR) SUBDIRS=$(CURDIR) modules

clean:
	rm -rf *.o *.ko *.mod.c *~ .*.cmd *.o.cmd .*.o.cmd \
	Module.symvers modules.order .tmp_versions modules.builtin

install:
	@$(MAKE) --no-print-directory -C $(KDIR) \
		SUBDIRS=$(CURDIR) modules_install