#ifndef LYNXDRV_H_
#define LYNXDRV_H_


#define FB_ACCEL_SMI 0xab
/* please use revision id to distinguish sm750le and sm750*/
#define SPC_SM750 	0

//#define SPC_SM750LE 8

#define MB(x) ((x)<<20)
#define MHZ(x) ((x) * 1000000)
/* align should be 2,4,8,16 */
#define PADDING(align,data) (((data)+(align)-1)&(~((align) -1)))
extern int smi_indent;


struct lynx_accel{
	/* base virtual address of DPR registers */
	volatile unsigned char __iomem * dprBase;
	/* base virtual address of de data port */
	volatile unsigned char __iomem * dpPortBase;

	/* function fointers */
	void (*de_init)(struct lynx_accel *);

	int (*de_wait)(void);/* see if hardware ready to work */

	int (*de_fillrect)(struct lynx_accel *,u32,u32,u32,
							u32,u32,u32,u32,u32,u32);

	int (*de_copyarea)(struct lynx_accel *,u32,u32,u32,u32,
						u32,u32,u32,u32,
						u32,u32,u32,u32);

	int (*de_imageblit)(struct lynx_accel *,const char *,u32,u32,u32,
						u32,u32,u32,u32,u32,u32,u32,u32,u32);

};

/* 	lynx_share stands for a presentation of two frame buffer
	that use one smi adaptor , it is similar to a basic class of C++
*/
struct lynx_share{
	/* common members */
	u16 devid;
	u8 revid;
	struct pci_dev * pdev;
	struct fb_info * fbinfo[2];
	struct lynx_accel accel;
	int accel_off;
	int dual;
#ifdef CONFIG_MTRR
		int mtrr_off;
		struct{
			int vram;
			int vram_added;
		}mtrr;
#endif
	/* all smi graphic adaptor got below attributes */
	unsigned long vidmem_start;
	unsigned long vidreg_start;
	__u32 vidmem_size;
	__u32 vidreg_size;
	void __iomem * pvReg;
	unsigned char __iomem * pvMem;
	/* locks*/
	spinlock_t slock;
	/* function pointers */
	void (*suspend)(struct lynx_share*);
	void (*resume)(struct lynx_share*);
};

struct lynx_cursor{
	/* cursor width ,height and size */
	int w;
	int h;
	int size;
	/* hardware limitation */
	int maxW;
	int maxH;
	/* base virtual address and offset  of cursor image */
	char __iomem * vstart;
	int offset;
	/* mmio addr of hw cursor */
	volatile char __iomem * mmio;
	/* the lynx_share of this adaptor */
	struct lynx_share * share;
	/* proc_routines */
	void (*enable)(struct lynx_cursor *);
	void (*disable)(struct lynx_cursor *);
	void (*setSize)(struct lynx_cursor *,int,int);
	void (*setPos)(struct lynx_cursor *,int,int);
	void (*setColor)(struct lynx_cursor *,u32,u32);
	void (*setData)(struct lynx_cursor *,u16,const u8*,const u8*);
};

struct lynxfb_crtc{
	unsigned char __iomem * vCursor;//virtual address of cursor
	unsigned char __iomem * vScreen;//virtual address of on_screen
	int oCursor;//cursor address offset in vidmem
	int oScreen;//onscreen address offset in vidmem
	int channel;/* which channel this crtc stands for*/
	resource_size_t vidmem_size;/* this view's video memory max size */

	/* below attributes belong to info->fix, their value depends on specific adaptor*/
	u16 line_pad;/* padding information:0,1,2,4,8,16,... */
	u16 xpanstep;
	u16 ypanstep;
	u16 ywrapstep;

	void * priv;

	int(*proc_setMode)(struct lynxfb_crtc*,
						struct fb_var_screeninfo*,
						struct fb_fix_screeninfo*);

	int(*proc_checkMode)(struct lynxfb_crtc*,struct fb_var_screeninfo*);
	int(*proc_setColReg)(struct lynxfb_crtc*,ushort,ushort,ushort,ushort);
	void (*clear)(struct lynxfb_crtc*);
        /* pan display */
	int (*proc_panDisplay)(struct lynxfb_crtc *,
			       const struct fb_var_screeninfo *,
			       const struct fb_info *);
	/* cursor information */
	struct lynx_cursor cursor;
};

struct lynxfb_output{
	int dpms;
	int paths;
	/* 	which paths(s) this output stands for,for sm750:
		paths=1:means output for panel paths
		paths=2:means output for crt paths
		paths=3:means output for both panel and crt paths
	*/

	int * channel;
	/* 	which channel these outputs linked with,for sm750:
		*channel=0 means primary channel
		*channel=1 means secondary channel
		output->channel ==> &crtc->channel
	*/
	void * priv;

	int(*proc_setMode)(struct lynxfb_output*,
						struct fb_var_screeninfo*,
						struct fb_fix_screeninfo*);

	int(*proc_checkMode)(struct lynxfb_output*,struct fb_var_screeninfo*);
	int(*proc_setBLANK)(struct lynxfb_output*,int);
	void  (*clear)(struct lynxfb_output*);
};

struct lynxfb_par{
	/* either 0 or 1 for dual head adaptor,0 is the older one registered */
	int index;
	unsigned int pseudo_palette[256];
	struct lynxfb_crtc crtc;
	struct lynxfb_output output;
	struct fb_info * info;
	struct lynx_share * share;
};

#ifndef offsetof
#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
#endif


#define PS_TO_HZ(ps)	\
			({ 	\
			unsigned long long hz = 1000*1000*1000*1000ULL;	\
			do_div(hz,ps);	\
			(unsigned long)hz;})

static inline unsigned long ps_to_hz(unsigned int psvalue)
{
	unsigned long long numerator=1000*1000*1000*1000ULL;
	/* 10^12 / picosecond period gives frequency in Hz */
	do_div(numerator, psvalue);
	return (unsigned long)numerator;
}


#endif