/* Miscellaneous support for test programs.

Copyright 2001-2016 Free Software Foundation, Inc.
Contributed by the AriC and Caramba projects, INRIA.

This file is part of the GNU MPFR Library.

The GNU MPFR Library is free software; you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as published by
the Free Software Foundation; either version 3 of the License, or (at your
option) any later version.

The GNU MPFR Library is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General Public
License for more details.

You should have received a copy of the GNU Lesser General Public License
along with the GNU MPFR Library; see the file COPYING.LESSER.  If not, see
http://www.gnu.org/licenses/ or write to the Free Software Foundation, Inc.,
51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. */

#ifdef HAVE_CONFIG_H
# if HAVE_CONFIG_H
#  include "config.h"     /* for a build within gmp */
# endif
#endif

#include <stdlib.h>
#include <float.h>
#include <errno.h>

#ifdef HAVE_LOCALE_H
#include <locale.h>
#endif

#ifdef MPFR_TEST_DIVBYZERO
# include <fenv.h>
#endif

#ifdef TIME_WITH_SYS_TIME
# include <sys/time.h>  /* for struct timeval */
# include <time.h>
#elif defined HAVE_SYS_TIME_H
#  include <sys/time.h>
#else
#  include <time.h>
#endif

/* <sys/fpu.h> is needed to have union fpc_csr defined under IRIX64
   (see below). Let's include it only if need be. */
#if defined HAVE_SYS_FPU_H && defined HAVE_FPC_CSR
# include <sys/fpu.h>
#endif

#ifdef MPFR_TESTS_TIMEOUT
#include <sys/resource.h>
#endif

#include "mpfr-test.h"

#ifdef MPFR_FPU_PREC
/* This option allows to test MPFR on x86 processors when the FPU
 * rounding precision has been changed. As MPFR is a library, this can
 * occur in practice, either by the calling software or by some other
 * library or plug-in used by the calling software. This option is
 * mainly for developers. If it is used, then the <fpu_control.h>
 * header is assumed to exist and work like under Linux/x86. MPFR does
 * not need to be recompiled. So, a possible usage is the following:
 *
 *   cd tests
 *   make clean
 *   make check CFLAGS="-g -O2 -ffloat-store -DMPFR_FPU_PREC=_FPU_SINGLE"
 *
 * i.e. just add -DMPFR_FPU_PREC=... to the CFLAGS found in Makefile.
 *
 * Notes:
 *   + SSE2 (used to implement double's on x86_64, and possibly on x86
 *     too, depending on the compiler configuration and flags) is not
 *     affected by the dynamic precision.
 *   + When the FPU is set to single precision, the behavior of MPFR
 *     functions that have a native floating-point type (float, double,
 *     long double) as argument or return value is not guaranteed.
 */

#include <fpu_control.h>

static void
set_fpu_prec (void)
{
  fpu_control_t cw;

  _FPU_GETCW(cw);
  cw &= ~(_FPU_EXTENDED|_FPU_DOUBLE|_FPU_SINGLE);
  cw |= (MPFR_FPU_PREC);
  _FPU_SETCW(cw);
}

#endif

static mpfr_exp_t default_emin, default_emax;

static void tests_rand_start (void);
static void tests_rand_end   (void);
static void tests_limit_start (void);

/* We want to always import the function mpfr_dump inside the test
   suite, so that we can use it in GDB. But it doesn't work if we build
   a Windows DLL (initializer element is not a constant) */
#if !__GMP_LIBGMP_DLL
extern void (*dummy_func) (mpfr_srcptr);
void (*dummy_func)(mpfr_srcptr) = mpfr_dump;
#endif

/* Various version checks.
   A mismatch on the GMP version is not regarded as fatal. A mismatch
   on the MPFR version is regarded as fatal, since this means that we
   would not check the MPFR library that has just been built (the goal
   of "make check") but a different library that is already installed,
   i.e. any test result would be meaningless; in such a case, we exit
   immediately with an error (exit status = 1).
   Return value: 0 for no errors, 1 in case of any non-fatal error. */
int
test_version (void)
{
  const char *version;
  char buffer[256];
  int err = 0;

  sprintf (buffer, "%d.%d.%d", __GNU_MP_VERSION, __GNU_MP_VERSION_MINOR,
           __GNU_MP_VERSION_PATCHLEVEL);
  if (strcmp (buffer, gmp_version) != 0 &&
      (__GNU_MP_VERSION_PATCHLEVEL != 0 ||
       (sprintf (buffer, "%d.%d", __GNU_MP_VERSION, __GNU_MP_VERSION_MINOR),
        strcmp (buffer, gmp_version) != 0)))
    err = 1;

  /* In some cases, it may be acceptable to have different versions for
     the header and the library, in particular when shared libraries are
     used (e.g., after a bug-fix upgrade of the library, and versioning
     ensures that this can be done only when the binary interface is
     compatible). However, when recompiling software like here, this
     should never happen (except if GMP has been upgraded between two
     "make check" runs, but there's no reason for that). A difference
     between the versions of gmp.h and libgmp probably indicates either
     a bad configuration or some other inconsistency in the development
     environment, and it is better to fail (in particular for automatic
     installations). */
  if (err)
    {
      printf ("ERROR! The versions of gmp.h (%s) and libgmp (%s) do not "
              "match.\nThe possible causes are:\n", buffer, gmp_version);
      printf ("  * A bad configuration in your include/library search paths.\n"
              "  * An inconsistency in the include/library search paths of\n"
              "    your development environment; an example:\n"
              "      http://gcc.gnu.org/ml/gcc-help/2010-11/msg00359.html\n"
              "  * GMP has been upgraded after the first \"make check\".\n"
              "    In such a case, try again after a \"make clean\".\n"
              "  * A new or non-standard version naming is used in GMP.\n"
              "    In this case, a patch may already be available on the\n"
              "    MPFR web site.  Otherwise please report the problem.\n");
      printf ("In the first two cases, this may lead to errors, in particular"
              " with MPFR.\nIf some other tests fail, please solve that"
              " problem first.\n");
    }

  /* VL: I get the following error on an OpenSUSE machine, and changing
     the value of shlibpath_overrides_runpath in the libtool file from
     'no' to 'yes' fixes the problem. */

  version = mpfr_get_version ();
  if (strcmp (MPFR_VERSION_STRING, version) == 0)
    {
      char buffer[16];
      int i;

      sprintf (buffer, "%d.%d.%d", MPFR_VERSION_MAJOR, MPFR_VERSION_MINOR,
               MPFR_VERSION_PATCHLEVEL);
      for (i = 0; buffer[i] == version[i]; i++)
        if (buffer[i] == '\0')
          return err;
      if (buffer[i] == '\0' && version[i] == '-')
        return err;
      printf ("%sMPFR_VERSION_MAJOR.MPFR_VERSION_MINOR.MPFR_VERSION_PATCHLEVEL"
              " (%s)\nand MPFR_VERSION_STRING (%s) do not match!\nIt seems "
              "that the mpfr.h file has been corrupted.\n", err ? "\n" : "",
              buffer, version);
    }
  else
    printf (
      "%sIncorrect MPFR version! (%s header vs %s library)\n"
      "Nothing else has been tested since for this reason, any other test\n"
      "may fail.  Please fix this problem first, as suggested below.  It\n"
      "probably comes from libtool (included in the MPFR tarball), which\n"
      "is responsible for setting up the search paths depending on the\n"
      "platform, or automake.\n"
      "  * On some platforms such as Solaris, $LD_LIBRARY_PATH overrides\n"
      "    the rpath, and if the MPFR library is already installed in a\n"
      "    $LD_LIBRARY_PATH directory, you typically get this error.  Do\n"
      "    not use $LD_LIBRARY_PATH on such platforms; it may also break\n"
      "    other things.\n"
      "  * Then look at http://www.mpfr.org/mpfr-current/ for any update.\n"
      "  * Try again on a completely clean source (some errors might come\n"
      "    from a previous build or previous source changes).\n"
      "  * If the error still occurs, you can try to change the value of\n"
      "    shlibpath_overrides_runpath ('yes' or 'no') in the \"libtool\"\n"
      "    file and rebuild MPFR (make clean && make && make check).  You\n"
      "    may want to report the problem to the libtool and/or automake\n"
      "    developers, with the effect of this change.\n",
      err ? "\n" : "", MPFR_VERSION_STRING, version);
  /* Note about $LD_LIBRARY_PATH under Solaris:
   *   https://en.wikipedia.org/wiki/Rpath#Solaris_ld.so
   * This cause has been confirmed by a user who got this error.
   */
  exit (1);
}

void
tests_start_mpfr (void)
{
  test_version ();

  /* don't buffer, so output is not lost if a test causes a segv etc */
  setbuf (stdout, NULL);

#if defined HAVE_LOCALE_H && defined HAVE_SETLOCALE
  /* Added on 2005-07-09. This allows to test MPFR under various
     locales. New bugs will probably be found, in particular with
     LC_ALL="tr_TR.ISO8859-9" because of the i/I character... */
  setlocale (LC_ALL, "");
#endif

#ifdef MPFR_FPU_PREC
  set_fpu_prec ();
#endif

#ifdef MPFR_TEST_DIVBYZERO
  /* Define to test the use of MPFR_ERRDIVZERO */
  feclearexcept (FE_ALL_EXCEPT);
#endif

  tests_memory_start ();
  tests_rand_start ();
  tests_limit_start ();

  default_emin = mpfr_get_emin ();
  default_emax = mpfr_get_emax ();
}

void
tests_end_mpfr (void)
{
  int err = 0;

  if (mpfr_get_emin () != default_emin)
    {
      printf ("Default emin value has not been restored!\n");
      err = 1;
    }

  if (mpfr_get_emax () != default_emax)
    {
      printf ("Default emax value has not been restored!\n");
      err = 1;
    }

  mpfr_free_cache ();
  tests_rand_end ();
  tests_memory_end ();

#ifdef MPFR_TEST_DIVBYZERO
  /* Define to test the use of MPFR_ERRDIVZERO */
  if (fetestexcept (FE_DIVBYZERO|FE_INVALID))
    {
      printf ("A floating-point division by 0 or an invalid operation"
              " occurred!\n");
#ifdef MPFR_ERRDIVZERO
      /* This should never occur because the purpose of defining
         MPFR_ERRDIVZERO is to avoid all the FP divisions by 0. */
      err = 1;
#endif
    }
#endif

  if (err)
    exit (err);
}

static void
tests_limit_start (void)
{
#ifdef MPFR_TESTS_TIMEOUT
  struct rlimit rlim[1];
  char *timeoutp;
  int timeout;

  timeoutp = getenv ("MPFR_TESTS_TIMEOUT");
  timeout = timeoutp != NULL ? atoi (timeoutp) : MPFR_TESTS_TIMEOUT;
  if (timeout > 0)
    {
      /* We need to call getrlimit first to initialize rlim_max to
         an acceptable value for setrlimit. When enabled, timeouts
         are regarded as important: we don't want to take too much
         CPU time on machines shared with other users. So, if we
         can't set the timeout, we exit immediately. */
      if (getrlimit (RLIMIT_CPU, rlim))
        {
          printf ("Error: getrlimit failed\n");
          exit (1);
        }
      rlim->rlim_cur = timeout;
      if (setrlimit (RLIMIT_CPU, rlim))
        {
          printf ("Error: setrlimit failed\n");
          exit (1);
        }
    }
#endif
}

static void
tests_rand_start (void)
{
  gmp_randstate_ptr  rands;
  char           *perform_seed;
  unsigned long  seed;

  if (__gmp_rands_initialized)
    {
      printf (
        "Please let tests_start() initialize the global __gmp_rands, i.e.\n"
        "ensure that function is called before the first use of RANDS.\n");
      exit (1);
    }

  gmp_randinit_default (__gmp_rands);
  __gmp_rands_initialized = 1;
  rands = __gmp_rands;

  perform_seed = getenv ("GMP_CHECK_RANDOMIZE");
  if (perform_seed != NULL)
    {
      seed = strtoul (perform_seed, NULL, 10);
      if (! (seed == 0 || seed == 1))
        {
          printf ("Re-seeding with GMP_CHECK_RANDOMIZE=%lu\n", seed);
          gmp_randseed_ui (rands, seed);
        }
      else
        {
#ifdef HAVE_GETTIMEOFDAY
          struct timeval  tv;
          gettimeofday (&tv, NULL);
          seed = tv.tv_sec + tv.tv_usec;
#else
          time_t  tv;
          time (&tv);
          seed = tv;
#endif
          gmp_randseed_ui (rands, seed);
          printf ("Seed GMP_CHECK_RANDOMIZE=%lu "
                  "(include this in bug reports)\n", seed);
        }
    }
  else
      gmp_randseed_ui (rands, 0x2143FEDC);
}

static void
tests_rand_end (void)
{
  RANDS_CLEAR ();
}

/* initialization function for tests using the hardware floats
   Not very useful now. */
void
mpfr_test_init (void)
{
#ifdef HAVE_FPC_CSR
  /* to get subnormal numbers on IRIX64 */
  union fpc_csr exp;

  exp.fc_word = get_fpc_csr();
  exp.fc_struct.flush = 0;
  set_fpc_csr(exp.fc_word);
#endif

#ifdef HAVE_DENORMS
  {
    double d = DBL_MIN;
    if (2.0 * (d / 2.0) != d)
      {
        printf ("Error: HAVE_DENORMS defined, but no subnormals.\n");
        exit (1);
      }
  }
#endif

  /* generate DBL_EPSILON with a loop to avoid that the compiler
     optimizes the code below in non-IEEE 754 mode, deciding that
     c = d is always false. */
#if 0
  for (eps = 1.0; eps != DBL_EPSILON; eps /= 2.0);
  c = 1.0 + eps;
  d = eps * (1.0 - eps) / 2.0;
  d += c;
  if (c != d)
    {
      printf ("Warning: IEEE 754 standard not fully supported\n"
              "         (maybe extended precision not disabled)\n"
              "         Some tests may fail\n");
    }
#endif
}


/* generate a random limb */
mp_limb_t
randlimb (void)
{
  mp_limb_t limb;

  mpfr_rand_raw (&limb, RANDS, GMP_NUMB_BITS);
  return limb;
}

/* returns ulp(x) for x a 'normal' double-precision number */
double
Ulp (double x)
{
   double y, eps;

   if (x < 0) x = -x;

   y = x * 2.220446049250313080847263336181640625e-16 ; /* x / 2^52 */

   /* as ulp(x) <= y = x/2^52 < 2*ulp(x),
   we have x + ulp(x) <= x + y <= x + 2*ulp(x),
   therefore o(x + y) = x + ulp(x) or x + 2*ulp(x) */

   eps =  x + y;
   eps = eps - x; /* ulp(x) or 2*ulp(x) */

   return (eps > y) ? 0.5 * eps : eps;
}

/* returns the number of ulp's between a and b,
   where a and b can be any floating-point number, except NaN
 */
int
ulp (double a, double b)
{
  double twoa;

  if (a == b) return 0; /* also deals with a=b=inf or -inf */

  twoa = a + a;
  if (twoa == a) /* a is +/-0.0 or +/-Inf */
    return ((b < a) ? INT_MAX : -INT_MAX);

  return (int) ((a - b) / Ulp (a));
}

/* return double m*2^e */
double
dbl (double m, int e)
{
  if (e >=0 )
    while (e-- > 0)
      m *= 2.0;
  else
    while (e++ < 0)
      m /= 2.0;
  return m;
}

/* Warning: NaN values cannot be distinguished if MPFR_NANISNAN is defined. */
int
Isnan (double d)
{
  return (d) != (d);
}

void
d_trace (const char *name, double d)
{
  union {
    double         d;
    unsigned char  b[sizeof(double)];
  } u;
  int  i;

  if (name != NULL && name[0] != '\0')
    printf ("%s=", name);

  u.d = d;
  printf ("[");
  for (i = 0; i < (int) sizeof (u.b); i++)
    {
      if (i != 0)
        printf (" ");
      printf ("%02X", (int) u.b[i]);
    }
  printf ("] %.20g\n", d);
}

void
ld_trace (const char *name, long double ld)
{
  union {
    long double    ld;
    unsigned char  b[sizeof(long double)];
  } u;
  int  i;

  if (name != NULL && name[0] != '\0')
    printf ("%s=", name);

  u.ld = ld;
  printf ("[");
  for (i = 0; i < (int) sizeof (u.b); i++)
    {
      if (i != 0)
        printf (" ");
      printf ("%02X", (int) u.b[i]);
    }
  printf ("] %.20Lg\n", ld);
}

/* Open a file in the src directory - can't use fopen directly */
FILE *
src_fopen (const char *filename, const char *mode)
{
#ifndef SRCDIR
  return fopen (filename, mode);
#else
  const char *srcdir = SRCDIR;
  char *buffer;
  size_t buffsize;
  FILE *f;

  buffsize = strlen (filename) + strlen (srcdir) + 2;
  buffer = (char *) tests_allocate (buffsize);
  if (buffer == NULL)
    {
      printf ("src_fopen: failed to alloc memory)\n");
      exit (1);
    }
  sprintf (buffer, "%s/%s", srcdir, filename);
  f = fopen (buffer, mode);
  tests_free (buffer, buffsize);
  return f;
#endif
}

void
set_emin (mpfr_exp_t exponent)
{
  if (mpfr_set_emin (exponent))
    {
      printf ("set_emin: setting emin to %ld failed\n", (long int) exponent);
      exit (1);
    }
}

void
set_emax (mpfr_exp_t exponent)
{
  if (mpfr_set_emax (exponent))
    {
      printf ("set_emax: setting emax to %ld failed\n", (long int) exponent);
      exit (1);
    }
}

/* pos is 512 times the proportion of negative numbers.
   If pos=256, half of the numbers are negative.
   If pos=0, all generated numbers are positive.
*/
void
tests_default_random (mpfr_ptr x, int pos, mpfr_exp_t emin, mpfr_exp_t emax,
                      int always_scale)
{
  MPFR_ASSERTN (emin <= emax);
  MPFR_ASSERTN (emin >= MPFR_EMIN_MIN);
  MPFR_ASSERTN (emax <= MPFR_EMAX_MAX);
  /* but it isn't required that emin and emax are in the current
     exponent range (see below), so that underflow/overflow checks
     can be done on 64-bit machines. */

  mpfr_urandomb (x, RANDS);
  if (MPFR_IS_PURE_FP (x) && (emin >= 1 || always_scale || (randlimb () & 1)))
    {
      mpfr_exp_t e;
      e = MPFR_GET_EXP (x) +
        (emin + (mpfr_exp_t) (randlimb () % (emax - emin + 1)));
      /* Note: There should be no overflow here because both terms are
         between MPFR_EMIN_MIN and MPFR_EMAX_MAX, but the sum e isn't
         necessarily between MPFR_EMIN_MIN and MPFR_EMAX_MAX. */
      if (mpfr_set_exp (x, e))
        {
          /* The random number doesn't fit in the current exponent range.
             In this case, test the function in the extended exponent range,
             which should be restored by the caller. */
          mpfr_set_emin (MPFR_EMIN_MIN);
          mpfr_set_emax (MPFR_EMAX_MAX);
          mpfr_set_exp (x, e);
        }
    }
  if (randlimb () % 512 < pos)
    mpfr_neg (x, x, MPFR_RNDN);
}

/* The test_one argument is seen a boolean. If it is true and rnd is
   a rounding mode toward infinity, then the function is tested in
   only one rounding mode (the one provided in rnd) and the variable
   rndnext is not used (due to the break). If it is true and rnd is a
   rounding mode toward or away from zero, then the function is tested
   twice, first with the provided rounding mode and second with the
   rounding mode toward the corresponding infinity (determined by the
   sign of the result). If it is false, then the function is tested
   in the 5 rounding modes, and rnd must initially be MPFR_RNDZ; thus
   rndnext will be initialized in the first iteration.
   If the test_one argument is 2, then this means that y is exact, and
   the ternary value is checked.
   As examples of use, see the calls to test5rm from the data_check and
   bad_cases functions. */
static void
test5rm (int (*fct) (FLIST), mpfr_srcptr x, mpfr_ptr y, mpfr_ptr z,
         mpfr_rnd_t rnd, int test_one, const char *name)
{
  mpfr_prec_t yprec = MPFR_PREC (y);
  mpfr_rnd_t rndnext = MPFR_RND_MAX;  /* means uninitialized */

  MPFR_ASSERTN (test_one || rnd == MPFR_RNDZ);
  mpfr_set_prec (z, yprec);
  while (1)
    {
      int inex;

      MPFR_ASSERTN (rnd != MPFR_RND_MAX);
      inex = fct (z, x, rnd);
      if (! (mpfr_equal_p (y, z) || (mpfr_nan_p (y) && mpfr_nan_p (z))))
        {
          printf ("Error for %s with xprec=%lu, yprec=%lu, rnd=%s\nx = ",
                  name, (unsigned long) MPFR_PREC (x), (unsigned long) yprec,
                  mpfr_print_rnd_mode (rnd));
          mpfr_out_str (stdout, 16, 0, x, MPFR_RNDN);
          printf ("\nexpected ");
          mpfr_out_str (stdout, 16, 0, y, MPFR_RNDN);
          printf ("\ngot      ");
          mpfr_out_str (stdout, 16, 0, z, MPFR_RNDN);
          printf ("\n");
          exit (1);
        }
      if (test_one == 2 && inex != 0)
        {
          printf ("Error for %s with xprec=%lu, yprec=%lu, rnd=%s\nx = ",
                  name, (unsigned long) MPFR_PREC (x), (unsigned long) yprec,
                  mpfr_print_rnd_mode (rnd));
          mpfr_out_str (stdout, 16, 0, x, MPFR_RNDN);
          printf ("\nexact case, but non-zero ternary value (%d)\n", inex);
          exit (1);
        }
      if (rnd == MPFR_RNDN)
        break;

      if (test_one)
        {
          if (rnd == MPFR_RNDU || rnd == MPFR_RNDD)
            break;

          if (MPFR_IS_NEG (y))
            rnd = (rnd == MPFR_RNDA) ? MPFR_RNDD : MPFR_RNDU;
          else
            rnd = (rnd == MPFR_RNDA) ? MPFR_RNDU : MPFR_RNDD;
        }
      else if (rnd == MPFR_RNDZ)
        {
          rnd = MPFR_IS_NEG (y) ? MPFR_RNDU : MPFR_RNDD;
          rndnext = MPFR_RNDA;
        }
      else
        {
          rnd = rndnext;
          if (rnd == MPFR_RNDA)
            {
              mpfr_nexttoinf (y);
              rndnext = (MPFR_IS_NEG (y)) ? MPFR_RNDD : MPFR_RNDU;
            }
          else if (rndnext != MPFR_RNDN)
            rndnext = MPFR_RNDN;
          else
            {
              if (yprec == MPFR_PREC_MIN)
                break;
              mpfr_prec_round (y, --yprec, MPFR_RNDZ);
              mpfr_set_prec (z, yprec);
            }
        }
    }
}

/* Check data in file f for function foo, with name 'name'.
   Each line consists of the file f one:

   xprec yprec rnd x y

   where:

   xprec is the input precision
   yprec is the output precision
   rnd is the rounding mode (n, z, u, d, a, Z, *)
   x is the input (hexadecimal format)
   y is the expected output (hexadecimal format) for foo(x) with rounding rnd

   If rnd is Z, y is the expected output in round-toward-zero, and the
   four directed rounding modes are tested, then the round-to-nearest
   mode is tested in precision yprec-1. This is useful for worst cases,
   where yprec is the minimum value such that one has a worst case in a
   directed rounding mode.

   If rnd is *, y must be an exact case. All the rounding modes are tested
   and the ternary value is checked (it must be 0).
 */
void
data_check (const char *f, int (*foo) (FLIST), const char *name)
{
  FILE *fp;
  long int xprec, yprec;  /* not mpfr_prec_t because of the fscanf */
  mpfr_t x, y, z;
  mpfr_rnd_t rnd;
  char r;
  int c;

  fp = fopen (f, "r");
  if (fp == NULL)
    fp = src_fopen (f, "r");
  if (fp == NULL)
    {
      char *v = (char *) MPFR_VERSION_STRING;

      /* In the '-dev' versions, assume that the data file exists and
         return an error if the file cannot be opened to make sure
         that such failures are detected. */
      while (*v != '\0')
        v++;
      if (v[-4] == '-' && v[-3] == 'd' && v[-2] == 'e' && v[-1] == 'v')
        {
          printf ("Error: unable to open file '%s'\n", f);
          exit (1);
        }
      else
        return;
    }

  mpfr_init (x);
  mpfr_init (y);
  mpfr_init (z);

  while (!feof (fp))
    {
      /* skip whitespace, for consistency */
      if (fscanf (fp, " ") == EOF)
        {
          if (ferror (fp))
            {
              perror ("data_check");
              exit (1);
            }
          else
            break;  /* end of file */
        }

      if ((c = getc (fp)) == EOF)
        {
          if (ferror (fp))
            {
              perror ("data_check");
              exit (1);
            }
          else
            break;  /* end of file */
        }

      if (c == '#') /* comment: read entire line */
        {
          do
            {
              c = getc (fp);
            }
          while (!feof (fp) && c != '\n');
        }
      else
        {
          ungetc (c, fp);

          c = fscanf (fp, "%ld %ld %c", &xprec, &yprec, &r);
          MPFR_ASSERTN (xprec >= MPFR_PREC_MIN && xprec <= MPFR_PREC_MAX);
          MPFR_ASSERTN (yprec >= MPFR_PREC_MIN && yprec <= MPFR_PREC_MAX);
          if (c == EOF)
            {
              perror ("data_check");
              exit (1);
            }
          else if (c != 3)
            {
              printf ("Error: corrupted line in file '%s'\n", f);
              exit (1);
            }

          switch (r)
            {
            case 'n':
              rnd = MPFR_RNDN;
              break;
            case 'z': case 'Z':
              rnd = MPFR_RNDZ;
              break;
            case 'u':
              rnd = MPFR_RNDU;
              break;
            case 'd':
              rnd = MPFR_RNDD;
              break;
            case '*':
              rnd = MPFR_RND_MAX; /* non-existing rounding mode */
              break;
            default:
              printf ("Error: unexpected rounding mode"
                      " in file '%s': %c\n", f, (int) r);
              exit (1);
            }
          mpfr_set_prec (x, xprec);
          mpfr_set_prec (y, yprec);
          if (mpfr_inp_str (x, fp, 0, MPFR_RNDN) == 0)
            {
              printf ("Error: corrupted argument in file '%s'\n", f);
              exit (1);
            }
          if (mpfr_inp_str (y, fp, 0, MPFR_RNDN) == 0)
            {
              printf ("Error: corrupted result in file '%s'\n", f);
              exit (1);
            }
          if (getc (fp) != '\n')
            {
              printf ("Error: result not followed by \\n in file '%s'\n", f);
              exit (1);
            }
          /* Skip whitespace, in particular at the end of the file. */
          if (fscanf (fp, " ") == EOF && ferror (fp))
            {
              perror ("data_check");
              exit (1);
            }
          if (r == '*')
            {
              int rndint;
              RND_LOOP (rndint)
                test5rm (foo, x, y, z, (mpfr_rnd_t) rndint, 2, name);
            }
          else
            test5rm (foo, x, y, z, rnd, r != 'Z', name);
        }
    }

  mpfr_clear (x);
  mpfr_clear (y);
  mpfr_clear (z);

  fclose (fp);
}

/* Test n random bad cases. A precision py in [pymin,pymax] and
 * a number y of precision py are chosen randomly. One computes
 * x = inv(y) in precision px = py + psup (rounded to nearest).
 * Then (in general), y is a bad case for fct in precision py (in
 * the directed rounding modes, but also in the rounding-to-nearest
 * mode for some lower precision: see data_check).
 * fct, inv, name: data related to the function.
 * pos, emin, emax: arguments for tests_default_random.
 */
void
bad_cases (int (*fct)(FLIST), int (*inv)(FLIST), const char *name,
           int pos, mpfr_exp_t emin, mpfr_exp_t emax,
           mpfr_prec_t pymin, mpfr_prec_t pymax, mpfr_prec_t psup,
           int n)
{
  mpfr_t x, y, z;
  char *dbgenv;
  int i, dbg;
  mpfr_exp_t old_emin, old_emax;

  old_emin = mpfr_get_emin ();
  old_emax = mpfr_get_emax ();

  dbgenv = getenv ("MPFR_DEBUG_BADCASES");
  dbg = dbgenv != 0 ? atoi (dbgenv) : 0;  /* debug level */
  mpfr_inits (x, y, z, (mpfr_ptr) 0);
  for (i = 0; i < n; i++)
    {
      mpfr_prec_t px, py, pz;
      int inex;

      if (dbg)
        printf ("bad_cases: i = %d\n", i);
      py = pymin + (randlimb () % (pymax - pymin + 1));
      mpfr_set_prec (y, py);
      tests_default_random (y, pos, emin, emax, 0);
      if (dbg)
        {
          printf ("bad_cases: yprec =%4ld, y = ", (long) py);
          mpfr_out_str (stdout, 16, 0, y, MPFR_RNDN);
          printf ("\n");
        }
      px = py + psup;
      mpfr_set_prec (x, px);
      mpfr_clear_flags ();
      inv (x, y, MPFR_RNDN);
      if (mpfr_nanflag_p () || mpfr_overflow_p () || mpfr_underflow_p ())
        {
          if (dbg)
            printf ("bad_cases: no normal inverse\n");
          goto next_i;
        }
      if (dbg > 1)
        {
          printf ("bad_cases: x = ");
          mpfr_out_str (stdout, 16, 0, x, MPFR_RNDN);
          printf ("\n");
        }
      pz = px;
      do
        {
          pz += 32;
          mpfr_set_prec (z, pz);
          if (fct (z, x, MPFR_RNDN) == 0)
            {
              if (dbg)
                printf ("bad_cases: exact case\n");
              goto next_i;
            }
          if (dbg)
            {
              if (dbg > 1)
                {
                  printf ("bad_cases: %s(x) ~= ", name);
                  mpfr_out_str (stdout, 16, 0, z, MPFR_RNDN);
                }
              else
                {
                  printf ("bad_cases:   [MPFR_RNDZ]  ~= ");
                  mpfr_out_str (stdout, 16, 40, z, MPFR_RNDZ);
                }
              printf ("\n");
            }
          inex = mpfr_prec_round (z, py, MPFR_RNDN);
          if (mpfr_nanflag_p () || mpfr_overflow_p () || mpfr_underflow_p ()
              || ! mpfr_equal_p (z, y))
            {
              if (dbg)
                printf ("bad_cases: inverse doesn't match\n");
              goto next_i;
            }
        }
      while (inex == 0);
      /* We really have a bad case. */
      do
        py--;
      while (py >= MPFR_PREC_MIN && mpfr_prec_round (z, py, MPFR_RNDZ) == 0);
      py++;
      /* py is now the smallest output precision such that we have
         a bad case in the directed rounding modes. */
      if (mpfr_prec_round (y, py, MPFR_RNDZ) != 0)
        {
          printf ("Internal error for i = %d\n", i);
          exit (1);
        }
      if ((inex > 0 && MPFR_IS_POS (z)) ||
          (inex < 0 && MPFR_IS_NEG (z)))
        {
          mpfr_nexttozero (y);
          if (mpfr_zero_p (y))
            goto next_i;
        }
      if (dbg)
        {
          printf ("bad_cases: yprec =%4ld, y = ", (long) py);
          mpfr_out_str (stdout, 16, 0, y, MPFR_RNDN);
          printf ("\n");
        }
      /* Note: y is now the expected result rounded toward zero. */
      test5rm (fct, x, y, z, MPFR_RNDZ, 0, name);
    next_i:
      /* In case the exponent range has been changed by
         tests_default_random()... */
      mpfr_set_emin (old_emin);
      mpfr_set_emax (old_emax);
    }
  mpfr_clears (x, y, z, (mpfr_ptr) 0);
}

void
flags_out (unsigned int flags)
{
  int none = 1;

  if (flags & MPFR_FLAGS_UNDERFLOW)
    none = 0, printf (" underflow");
  if (flags & MPFR_FLAGS_OVERFLOW)
    none = 0, printf (" overflow");
  if (flags & MPFR_FLAGS_NAN)
    none = 0, printf (" nan");
  if (flags & MPFR_FLAGS_INEXACT)
    none = 0, printf (" inexact");
  if (flags & MPFR_FLAGS_ERANGE)
    none = 0, printf (" erange");
  if (none)
    printf (" none");
  printf (" (%u)\n", flags);
}