blob: 57f577d85d9687eff7195465beff8bf18fb8835c [file] [log] [blame]
/*
* (C) Copyright 2013-2015
* NVIDIA Corporation <www.nvidia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <netdev.h>
#include <i2c.h>
#include <asm/arch/gpio.h>
#include <asm/arch/pinmux.h>
#include "../p2571/max77620_init.h"
#include "pinmux-config-p2371-2180.h"
void pin_mux_mmc(void)
{
struct udevice *dev;
uchar val;
int ret;
/* Turn on MAX77620 LDO2 to 3.3V for SD card power */
debug("%s: Set LDO2 for VDDIO_SDMMC_AP power to 3.3V\n", __func__);
ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev);
if (ret) {
printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
return;
}
/* 0xF2 for 3.3v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
val = 0xF2;
ret = dm_i2c_write(dev, MAX77620_CNFG1_L2_REG, &val, 1);
if (ret)
printf("i2c_write 0 0x3c 0x27 failed: %d\n", ret);
}
/*
* Routine: pinmux_init
* Description: Do individual peripheral pinmux configs
*/
void pinmux_init(void)
{
pinmux_clear_tristate_input_clamping();
gpio_config_table(p2371_2180_gpio_inits,
ARRAY_SIZE(p2371_2180_gpio_inits));
pinmux_config_pingrp_table(p2371_2180_pingrps,
ARRAY_SIZE(p2371_2180_pingrps));
pinmux_config_drvgrp_table(p2371_2180_drvgrps,
ARRAY_SIZE(p2371_2180_drvgrps));
}
#ifdef CONFIG_PCI_TEGRA
int tegra_pcie_board_init(void)
{
struct udevice *dev;
uchar val;
int ret;
/* Turn on MAX77620 LDO1 to 1.05V for PEX power */
debug("%s: Set LDO1 for PEX power to 1.05V\n", __func__);
ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev);
if (ret) {
printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
return -1;
}
/* 0xCA for 1.05v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
val = 0xCA;
ret = dm_i2c_write(dev, MAX77620_CNFG1_L1_REG, &val, 1);
if (ret)
printf("i2c_write 0 0x3c 0x25 failed: %d\n", ret);
return 0;
}
int board_eth_init(bd_t *bis)
{
return pci_eth_init(bis);
}
#endif /* PCI */