Google Git
Sign in
nest-open-source / manifest_repos / bootloader / 6bfdac06e51797a9d969343386055eb7a77616bb / . / drivers / ddr / marvell / axp / ddr3_write_leveling.c
blob: df3a3df4a660852591348988eedae6b5f1d6911d [file] [log] [blame]
/*
* Copyright (C) Marvell International Ltd. and its affiliates
*
* SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
#include <i2c.h>
#include <spl.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
#include "ddr3_hw_training.h"
/*
* Debug
*/
#define DEBUG_WL_C(s, d, l) \
DEBUG_WL_S(s); DEBUG_WL_D(d, l); DEBUG_WL_S("\n")
#define DEBUG_WL_FULL_C(s, d, l) \
DEBUG_WL_FULL_S(s); DEBUG_WL_FULL_D(d, l); DEBUG_WL_FULL_S("\n")
#ifdef MV_DEBUG_WL
#define DEBUG_RL_S(s) \
debug_cond(ddr3_get_log_level() >= MV_LOG_LEVEL_2, "%s", s)
#define DEBUG_RL_D(d, l) \
debug_cond(ddr3_get_log_level() >= MV_LOG_LEVEL_2, "%x", d)
#else
#define DEBUG_WL_S(s)
#define DEBUG_WL_D(d, l)
#endif
#ifdef MV_DEBUG_WL_FULL
#define DEBUG_WL_FULL_S(s) puts(s)
#define DEBUG_WL_FULL_D(d, l) printf("%x", d)
#else
#define DEBUG_WL_FULL_S(s)
#define DEBUG_WL_FULL_D(d, l)
#endif
#define WL_SUP_EXPECTED_DATA 0x21
#define WL_SUP_READ_DRAM_ENTRY 0x8
static int ddr3_write_leveling_single_cs(u32 cs, u32 freq, int ratio_2to1,
u32 *result,
MV_DRAM_INFO *dram_info);
static void ddr3_write_ctrl_pup_reg(int bc_acc, u32 pup, u32 reg_addr,
u32 data);
extern u16 odt_static[ODT_OPT][MAX_CS];
extern u16 odt_dynamic[ODT_OPT][MAX_CS];
extern u32 wl_sup_pattern[LEN_WL_SUP_PATTERN];
/*
* Name: ddr3_write_leveling_hw
* Desc: Execute Write leveling phase by HW
* Args: freq - current sequence frequency
* dram_info - main struct
* Notes:
* Returns: MV_OK if success, MV_FAIL if fail.
*/
int ddr3_write_leveling_hw(u32 freq, MV_DRAM_INFO *dram_info)
{
u32 reg, phase, delay, cs, pup;
#ifdef MV88F67XX
int dpde_flag = 0;
#endif
/* Debug message - Start Read leveling procedure */
DEBUG_WL_S("DDR3 - Write Leveling - Starting HW WL procedure\n");
#ifdef MV88F67XX
/* Dynamic pad issue (BTS669) during WL */
reg = reg_read(REG_DUNIT_CTRL_LOW_ADDR);
if (reg & (1 << REG_DUNIT_CTRL_LOW_DPDE_OFFS)) {
dpde_flag = 1;
reg_write(REG_DUNIT_CTRL_LOW_ADDR,
reg & ~(1 << REG_DUNIT_CTRL_LOW_DPDE_OFFS));
}
#endif
reg = 1 << REG_DRAM_TRAINING_WL_OFFS;
/* Config the retest number */
reg |= (COUNT_HW_WL << REG_DRAM_TRAINING_RETEST_OFFS);
reg |= (dram_info->cs_ena << (REG_DRAM_TRAINING_CS_OFFS));
reg_write(REG_DRAM_TRAINING_ADDR, reg); /* 0x15B0 - Training Register */
reg = reg_read(REG_DRAM_TRAINING_SHADOW_ADDR) |
(1 << REG_DRAM_TRAINING_AUTO_OFFS);
reg_write(REG_DRAM_TRAINING_SHADOW_ADDR, reg);
/* Wait */
do {
reg = reg_read(REG_DRAM_TRAINING_SHADOW_ADDR) &
(1 << REG_DRAM_TRAINING_AUTO_OFFS);
} while (reg); /* Wait for '0' */
reg = reg_read(REG_DRAM_TRAINING_ADDR);
/* Check if Successful */
if (reg & (1 << REG_DRAM_TRAINING_ERROR_OFFS)) {
/*
* Read results to arrays - Results are required for WL
* High freq Supplement and DQS Centralization
*/
for (cs = 0; cs < MAX_CS; cs++) {
if (dram_info->cs_ena & (1 << cs)) {
for (pup = 0;
pup < dram_info->num_of_total_pups;
pup++) {
if (pup == dram_info->num_of_std_pups
&& dram_info->ecc_ena)
pup = ECC_PUP;
reg =
ddr3_read_pup_reg(PUP_WL_MODE, cs,
pup);
phase =
(reg >> REG_PHY_PHASE_OFFS) &
PUP_PHASE_MASK;
delay = reg & PUP_DELAY_MASK;
dram_info->wl_val[cs][pup][P] = phase;
dram_info->wl_val[cs][pup][D] = delay;
dram_info->wl_val[cs][pup][S] =
WL_HI_FREQ_STATE - 1;
reg =
ddr3_read_pup_reg(PUP_WL_MODE + 0x1,
cs, pup);
dram_info->wl_val[cs][pup][DQS] =
(reg & 0x3F);
}
#ifdef MV_DEBUG_WL
/* Debug message - Print res for cs[i]: cs,PUP,Phase,Delay */
DEBUG_WL_S("DDR3 - Write Leveling - Write Leveling Cs - ");
DEBUG_WL_D((u32) cs, 1);
DEBUG_WL_S(" Results:\n");
for (pup = 0;
pup < dram_info->num_of_total_pups;
pup++) {
if (pup == dram_info->num_of_std_pups
&& dram_info->ecc_ena)
pup = ECC_PUP;
DEBUG_WL_S("DDR3 - Write Leveling - PUP: ");
DEBUG_WL_D((u32) pup, 1);
DEBUG_WL_S(", Phase: ");
DEBUG_WL_D((u32)
dram_info->wl_val[cs][pup]
[P], 1);
DEBUG_WL_S(", Delay: ");
DEBUG_WL_D((u32)
dram_info->wl_val[cs][pup]
[D], 2);
DEBUG_WL_S("\n");
}
#endif
}
}
/* Dynamic pad issue (BTS669) during WL */
#ifdef MV88F67XX
if (dpde_flag) {
reg = reg_read(REG_DUNIT_CTRL_LOW_ADDR) |
(1 << REG_DUNIT_CTRL_LOW_DPDE_OFFS);
reg_write(REG_DUNIT_CTRL_LOW_ADDR, reg);
}
#endif
DEBUG_WL_S("DDR3 - Write Leveling - HW WL Ended Successfully\n");
return MV_OK;
} else {
DEBUG_WL_S("DDR3 - Write Leveling - HW WL Error\n");
return MV_FAIL;
}
}
/*
* Name: ddr3_wl_supplement
* Desc: Write Leveling Supplement
* Args: dram_info - main struct
* Notes:
* Returns: MV_OK if success, MV_FAIL if fail.
*/
int ddr3_wl_supplement(MV_DRAM_INFO *dram_info)
{
u32 cs, cnt, pup_num, sum, phase, delay, max_pup_num, pup, sdram_offset;
u32 tmp_count, ecc, reg;
u32 ddr_width, tmp_pup, idx;
u32 sdram_pup_val, uj;
u32 one_clk_err = 0, align_err = 0, no_err = 0, err = 0, err_n = 0;
u32 sdram_data[LEN_WL_SUP_PATTERN] __aligned(32) = { 0 };
ddr_width = dram_info->ddr_width;
no_err = 0;
DEBUG_WL_S("DDR3 - Write Leveling Hi-Freq Supplement - Starting\n");
switch (ddr_width) {
/* Data error from pos-adge to pos-adge */
case 16:
one_clk_err = 4;
align_err = 4;
break;
case 32:
one_clk_err = 8;
align_err = 8;
break;
case 64:
one_clk_err = 0x10;
align_err = 0x10;
break;
default:
DEBUG_WL_S("Error - bus width!!!\n");
return MV_FAIL;
}
/* Enable SW override */
reg = reg_read(REG_DRAM_TRAINING_2_ADDR) |
(1 << REG_DRAM_TRAINING_2_SW_OVRD_OFFS);
/* [0] = 1 - Enable SW override */
/* 0x15B8 - Training SW 2 Register */
reg_write(REG_DRAM_TRAINING_2_ADDR, reg);
DEBUG_WL_S("DDR3 - Write Leveling Hi-Freq Supplement - SW Override Enabled\n");
reg = (1 << REG_DRAM_TRAINING_AUTO_OFFS);
reg_write(REG_DRAM_TRAINING_ADDR, reg); /* 0x15B0 - Training Register */
tmp_count = 0;
for (cs = 0; cs < MAX_CS; cs++) {
if (dram_info->cs_ena & (1 << cs)) {
sum = 0;
/*
* 2 iterations loop: 1)actual WL results 2) fix WL
* if needed
*/
for (cnt = 0; cnt < COUNT_WL_HI_FREQ; cnt++) {
DEBUG_WL_C("COUNT = ", cnt, 1);
for (ecc = 0; ecc < (dram_info->ecc_ena + 1);
ecc++) {
if (ecc) {
DEBUG_WL_S("ECC PUP:\n");
} else {
DEBUG_WL_S("DATA PUP:\n");
}
max_pup_num =
dram_info->num_of_std_pups * (1 -
ecc) +
ecc;
/* ECC Support - Switch ECC Mux on ecc=1 */
reg =
(reg_read(REG_DRAM_TRAINING_2_ADDR)
& ~(1 <<
REG_DRAM_TRAINING_2_ECC_MUX_OFFS));
reg |=
(dram_info->ecc_ena *
ecc <<
REG_DRAM_TRAINING_2_ECC_MUX_OFFS);
reg_write(REG_DRAM_TRAINING_2_ADDR,
reg);
ddr3_reset_phy_read_fifo();
/* Write to memory */
sdram_offset =
tmp_count * (SDRAM_CS_SIZE + 1) +
0x200;
if (MV_OK != ddr3_dram_sram_burst((u32)
wl_sup_pattern,
sdram_offset,
LEN_WL_SUP_PATTERN))
return MV_FAIL;
/* Read from memory */
if (MV_OK !=
ddr3_dram_sram_burst(sdram_offset,
(u32)
sdram_data,
LEN_WL_SUP_PATTERN))
return MV_FAIL;
/* Print the buffer */
for (uj = 0; uj < LEN_WL_SUP_PATTERN;
uj++) {
if ((uj % 4 == 0) && (uj != 0)) {
DEBUG_WL_S("\n");
}
DEBUG_WL_D(sdram_data[uj],
8);
DEBUG_WL_S(" ");
}
/* Check pup which DQS/DATA is error */
for (pup = 0; pup < max_pup_num; pup++) {
/* ECC support - bit 8 */
pup_num = (ecc) ? ECC_PUP : pup;
if (pup < 4) { /* lower 32 bit */
tmp_pup = pup;
idx =
WL_SUP_READ_DRAM_ENTRY;
} else { /* higher 32 bit */
tmp_pup = pup - 4;
idx =
WL_SUP_READ_DRAM_ENTRY
+ 1;
}
DEBUG_WL_S("\nCS: ");
DEBUG_WL_D((u32) cs, 1);
DEBUG_WL_S(" PUP: ");
DEBUG_WL_D((u32) pup_num, 1);
DEBUG_WL_S("\n");
sdram_pup_val =
((sdram_data[idx] >>
((tmp_pup) * 8)) & 0xFF);
DEBUG_WL_C("Actual Data = ",
sdram_pup_val, 2);
DEBUG_WL_C("Expected Data = ",
(WL_SUP_EXPECTED_DATA
+ pup), 2);
/*
* ALINGHMENT: calculate
* expected data vs actual data
*/
err =
(WL_SUP_EXPECTED_DATA +
pup) - sdram_pup_val;
/*
* CLOCK LONG: calculate
* expected data vs actual data
*/
err_n =
sdram_pup_val -
(WL_SUP_EXPECTED_DATA +
pup);
DEBUG_WL_C("err = ", err, 2);
DEBUG_WL_C("err_n = ", err_n,
2);
if (err == no_err) {
/* PUP is correct - increment State */
dram_info->wl_val[cs]
[pup_num]
[S] = 1;
} else if (err_n == one_clk_err) {
/* clock is longer than DQS */
phase =
((dram_info->wl_val
[cs]
[pup_num][P] +
WL_HI_FREQ_SHIFT)
% MAX_PHASE_2TO1);
dram_info->wl_val[cs]
[pup_num]
[P] = phase;
delay =
dram_info->wl_val
[cs][pup_num]
[D];
DEBUG_WL_S("#### Clock is longer than DQS more than one clk cycle ####\n");
ddr3_write_pup_reg
(PUP_WL_MODE, cs,
pup * (1 - ecc) +
ECC_PUP * ecc,
phase, delay);
} else if (err == align_err) {
/* clock is align to DQS */
phase =
dram_info->wl_val
[cs][pup_num]
[P];
delay =
dram_info->wl_val
[cs][pup_num]
[D];
DEBUG_WL_S("#### Alignment PUPS problem ####\n");
if ((phase == 0)
|| ((phase == 1)
&& (delay <=
0x10))) {
DEBUG_WL_S("#### Warning - Possible Layout Violation (DQS is longer than CLK)####\n");
}
phase = 0x0;
delay = 0x0;
dram_info->wl_val[cs]
[pup_num]
[P] = phase;
dram_info->wl_val[cs]
[pup_num]
[D] = delay;
ddr3_write_pup_reg
(PUP_WL_MODE, cs,
pup * (1 - ecc) +
ECC_PUP * ecc,
phase, delay);
}
/* Stop condition for ECC phase */
pup = (ecc) ? max_pup_num : pup;
}
/* ECC Support - Disable ECC MUX */
reg =
(reg_read(REG_DRAM_TRAINING_2_ADDR)
& ~(1 <<
REG_DRAM_TRAINING_2_ECC_MUX_OFFS));
reg_write(REG_DRAM_TRAINING_2_ADDR,
reg);
}
}
for (pup = 0; pup < dram_info->num_of_std_pups; pup++)
sum += dram_info->wl_val[cs][pup][S];
if (dram_info->ecc_ena)
sum += dram_info->wl_val[cs][ECC_PUP][S];
/* Checks if any pup is not locked after the change */
if (sum < (WL_HI_FREQ_STATE * (dram_info->num_of_total_pups))) {
DEBUG_WL_C("DDR3 - Write Leveling Hi-Freq Supplement - didn't work for Cs - ",
(u32) cs, 1);
return MV_FAIL;
}
tmp_count++;
}
}
dram_info->wl_max_phase = 0;
dram_info->wl_min_phase = 10;
/*
* Read results to arrays - Results are required for DQS Centralization
*/
for (cs = 0; cs < MAX_CS; cs++) {
if (dram_info->cs_ena & (1 << cs)) {
for (pup = 0; pup < dram_info->num_of_total_pups; pup++) {
if (pup == dram_info->num_of_std_pups
&& dram_info->ecc_ena)
pup = ECC_PUP;
reg = ddr3_read_pup_reg(PUP_WL_MODE, cs, pup);
phase =
(reg >> REG_PHY_PHASE_OFFS) &
PUP_PHASE_MASK;
if (phase > dram_info->wl_max_phase)
dram_info->wl_max_phase = phase;
if (phase < dram_info->wl_min_phase)
dram_info->wl_min_phase = phase;
}
}
}
/* Disable SW override - Must be in a different stage */
/* [0]=0 - Enable SW override */
reg = reg_read(REG_DRAM_TRAINING_2_ADDR);
reg &= ~(1 << REG_DRAM_TRAINING_2_SW_OVRD_OFFS);
/* 0x15B8 - Training SW 2 Register */
reg_write(REG_DRAM_TRAINING_2_ADDR, reg);
reg = reg_read(REG_DRAM_TRAINING_1_ADDR) |
(1 << REG_DRAM_TRAINING_1_TRNBPOINT_OFFS);
reg_write(REG_DRAM_TRAINING_1_ADDR, reg);
DEBUG_WL_S("DDR3 - Write Leveling Hi-Freq Supplement - Ended Successfully\n");
return MV_OK;
}
/*
* Name: ddr3_write_leveling_hw_reg_dimm
* Desc: Execute Write leveling phase by HW
* Args: freq - current sequence frequency
* dram_info - main struct
* Notes:
* Returns: MV_OK if success, MV_FAIL if fail.
*/
int ddr3_write_leveling_hw_reg_dimm(u32 freq, MV_DRAM_INFO *dram_info)
{
u32 reg, phase, delay, cs, pup, pup_num;
__maybe_unused int dpde_flag = 0;
/* Debug message - Start Read leveling procedure */
DEBUG_WL_S("DDR3 - Write Leveling - Starting HW WL procedure\n");
if (dram_info->num_cs > 2) {
DEBUG_WL_S("DDR3 - Write Leveling - HW WL Ended Successfully\n");
return MV_NO_CHANGE;
}
/* If target freq = 400 move clock start point */
/* Write to control PUP to Control Deskew Regs */
if (freq <= DDR_400) {
for (pup = 0; pup <= dram_info->num_of_total_pups; pup++) {
/* PUP_DELAY_MASK 0x1F */
/* reg = 0x0C10001F + (uj << 16); */
ddr3_write_ctrl_pup_reg(1, pup, CNTRL_PUP_DESKEW + pup,
0x1F);
}
}
#ifdef MV88F67XX
/* Dynamic pad issue (BTS669) during WL */
reg = reg_read(REG_DUNIT_CTRL_LOW_ADDR);
if (reg & (1 << REG_DUNIT_CTRL_LOW_DPDE_OFFS)) {
dpde_flag = 1;
reg_write(REG_DUNIT_CTRL_LOW_ADDR,
reg & ~(1 << REG_DUNIT_CTRL_LOW_DPDE_OFFS));
}
#endif
reg = (1 << REG_DRAM_TRAINING_WL_OFFS);
/* Config the retest number */
reg |= (COUNT_HW_WL << REG_DRAM_TRAINING_RETEST_OFFS);
reg |= (dram_info->cs_ena << (REG_DRAM_TRAINING_CS_OFFS));
reg_write(REG_DRAM_TRAINING_ADDR, reg); /* 0x15B0 - Training Register */
reg = reg_read(REG_DRAM_TRAINING_SHADOW_ADDR) |
(1 << REG_DRAM_TRAINING_AUTO_OFFS);
reg_write(REG_DRAM_TRAINING_SHADOW_ADDR, reg);
/* Wait */
do {
reg = reg_read(REG_DRAM_TRAINING_SHADOW_ADDR) &
(1 << REG_DRAM_TRAINING_AUTO_OFFS);
} while (reg); /* Wait for '0' */
reg = reg_read(REG_DRAM_TRAINING_ADDR);
/* Check if Successful */
if (reg & (1 << REG_DRAM_TRAINING_ERROR_OFFS)) {
/*
* Read results to arrays - Results are required for WL High
* freq Supplement and DQS Centralization
*/
for (cs = 0; cs < MAX_CS; cs++) {
if (dram_info->cs_ena & (1 << cs)) {
for (pup = 0;
pup < dram_info->num_of_total_pups;
pup++) {
if (pup == dram_info->num_of_std_pups
&& dram_info->ecc_ena)
pup = ECC_BIT;
reg =
ddr3_read_pup_reg(PUP_WL_MODE, cs,
pup);
phase =
(reg >> REG_PHY_PHASE_OFFS) &
PUP_PHASE_MASK;
delay = reg & PUP_DELAY_MASK;
dram_info->wl_val[cs][pup][P] = phase;
dram_info->wl_val[cs][pup][D] = delay;
if ((phase == 1) && (delay >= 0x1D)) {
/*
* Need to do it here for
* uncorrect WL values
*/
ddr3_write_pup_reg(PUP_WL_MODE,
cs, pup, 0,
0);
dram_info->wl_val[cs][pup][P] =
0;
dram_info->wl_val[cs][pup][D] =
0;
}
dram_info->wl_val[cs][pup][S] =
WL_HI_FREQ_STATE - 1;
reg =
ddr3_read_pup_reg(PUP_WL_MODE + 0x1,
cs, pup);
dram_info->wl_val[cs][pup][DQS] =
(reg & 0x3F);
}
#ifdef MV_DEBUG_WL
/*
* Debug message - Print res for cs[i]:
* cs,PUP,Phase,Delay
*/
DEBUG_WL_S("DDR3 - Write Leveling - Write Leveling Cs - ");
DEBUG_WL_D((u32) cs, 1);
DEBUG_WL_S(" Results:\n");
for (pup = 0;
pup < dram_info->num_of_total_pups;
pup++) {
DEBUG_WL_S
("DDR3 - Write Leveling - PUP: ");
DEBUG_WL_D((u32) pup, 1);
DEBUG_WL_S(", Phase: ");
DEBUG_WL_D((u32)
dram_info->wl_val[cs][pup]
[P], 1);
DEBUG_WL_S(", Delay: ");
DEBUG_WL_D((u32)
dram_info->wl_val[cs][pup]
[D], 2);
DEBUG_WL_S("\n");
}
#endif
}
}
#ifdef MV88F67XX
/* Dynamic pad issue (BTS669) during WL */
if (dpde_flag) {
reg = reg_read(REG_DUNIT_CTRL_LOW_ADDR) |
(1 << REG_DUNIT_CTRL_LOW_DPDE_OFFS);
reg_write(REG_DUNIT_CTRL_LOW_ADDR, reg);
}
#endif
DEBUG_WL_S("DDR3 - Write Leveling - HW WL Ended Successfully\n");
/* If target freq = 400 move clock back */
/* Write to control PUP to Control Deskew Regs */
if (freq <= DDR_400) {
for (pup = 0; pup <= dram_info->num_of_total_pups;
pup++) {
ddr3_write_ctrl_pup_reg(1, pup,
CNTRL_PUP_DESKEW + pup, 0);
}
}
return MV_OK;
} else {
/* Configure Each PUP with locked leveling settings */
for (cs = 0; cs < MAX_CS; cs++) {
if (dram_info->cs_ena & (1 << cs)) {
for (pup = 0;
pup < dram_info->num_of_total_pups;
pup++) {
/* ECC support - bit 8 */
pup_num = (pup == dram_info->num_of_std_pups) ?
ECC_BIT : pup;
ddr3_write_pup_reg(PUP_WL_MODE, cs,
pup_num, 0, 0);
}
}
}
reg_write(REG_DRAM_TRAINING_ADDR, 0);
/* If target freq = 400 move clock back */
/* Write to control PUP to Control Deskew Regs */
if (freq <= DDR_400) {
for (pup = 0; pup <= dram_info->num_of_total_pups;
pup++) {
ddr3_write_ctrl_pup_reg(1, pup,
CNTRL_PUP_DESKEW + pup, 0);
}
}
DEBUG_WL_S("DDR3 - Write Leveling - HW WL Ended Successfully\n");
return MV_NO_CHANGE;
}
}
/*
* Name: ddr3_write_leveling_sw
* Desc: Execute Write leveling phase by SW
* Args: freq - current sequence frequency
* dram_info - main struct
* Notes:
* Returns: MV_OK if success, MV_FAIL if fail.
*/
int ddr3_write_leveling_sw(u32 freq, int ratio_2to1, MV_DRAM_INFO *dram_info)
{
u32 reg, cs, cnt, pup, max_pup_num;
u32 res[MAX_CS];
max_pup_num = dram_info->num_of_total_pups;
__maybe_unused int dpde_flag = 0;
/* Debug message - Start Write leveling procedure */
DEBUG_WL_S("DDR3 - Write Leveling - Starting SW WL procedure\n");
#ifdef MV88F67XX
/* Dynamic pad issue (BTS669) during WL */
reg = reg_read(REG_DUNIT_CTRL_LOW_ADDR);
if (reg & (1 << REG_DUNIT_CTRL_LOW_DPDE_OFFS)) {
dpde_flag = 1;
reg_write(REG_DUNIT_CTRL_LOW_ADDR,
reg & ~(1 << REG_DUNIT_CTRL_LOW_DPDE_OFFS));
}
#endif
/* Set Output buffer-off to all CS and correct ODT values */
for (cs = 0; cs < MAX_CS; cs++) {
if (dram_info->cs_ena & (1 << cs)) {
reg = reg_read(REG_DDR3_MR1_ADDR) &
REG_DDR3_MR1_ODT_MASK;
reg |= odt_static[dram_info->cs_ena][cs];
reg |= (1 << REG_DDR3_MR1_OUTBUF_DIS_OFFS);
/* 0x15D0 - DDR3 MR0 Register */
reg_write(REG_DDR3_MR1_ADDR, reg);
/* Issue MRS Command to current cs */
reg = REG_SDRAM_OPERATION_CMD_MR1 &
~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs));
/*
* [3-0] = 0x4 - MR1 Command, [11-8] -
* enable current cs
*/
/* 0x1418 - SDRAM Operation Register */
reg_write(REG_SDRAM_OPERATION_ADDR, reg);
udelay(MRS_DELAY);
}
}
DEBUG_WL_FULL_S("DDR3 - Write Leveling - Qoff and RTT Values are set for all Cs\n");
/* Enable SW override */
reg = reg_read(REG_DRAM_TRAINING_2_ADDR) |
(1 << REG_DRAM_TRAINING_2_SW_OVRD_OFFS);
/* [0] = 1 - Enable SW override */
/* 0x15B8 - Training SW 2 Register */
reg_write(REG_DRAM_TRAINING_2_ADDR, reg);
DEBUG_WL_FULL_S("DDR3 - Write Leveling - SW Override Enabled\n");
/* Enable PHY write leveling mode */
reg = reg_read(REG_DRAM_TRAINING_2_ADDR) &
~(1 << REG_DRAM_TRAINING_2_WL_MODE_OFFS);
/* [2] = 0 - TrnWLMode - Enable */
/* 0x15B8 - Training SW 2 Register */
reg_write(REG_DRAM_TRAINING_2_ADDR, reg);
/* Reset WL results arry */
memset(dram_info->wl_val, 0, sizeof(u32) * MAX_CS * MAX_PUP_NUM * 7);
/* Loop for each cs */
for (cs = 0; cs < MAX_CS; cs++) {
if (dram_info->cs_ena & (1 << cs)) {
DEBUG_WL_FULL_C("DDR3 - Write Leveling - Starting working with Cs - ",
(u32) cs, 1);
/* Refresh X9 current cs */
DEBUG_WL_FULL_S("DDR3 - Write Leveling - Refresh X9\n");
for (cnt = 0; cnt < COUNT_WL_RFRS; cnt++) {
reg =
REG_SDRAM_OPERATION_CMD_RFRS & ~(1 <<
(REG_SDRAM_OPERATION_CS_OFFS
+ cs));
/* [3-0] = 0x2 - refresh, [11-8] - enable current cs */
reg_write(REG_SDRAM_OPERATION_ADDR, reg); /* 0x1418 - SDRAM Operation Register */
do {
reg =
((reg_read
(REG_SDRAM_OPERATION_ADDR)) &
REG_SDRAM_OPERATION_CMD_RFRS_DONE);
} while (reg); /* Wait for '0' */
}
/* Configure MR1 in Cs[CsNum] - write leveling on, output buffer on */
DEBUG_WL_FULL_S("DDR3 - Write Leveling - Configure MR1 for current Cs: WL-on,OB-on\n");
reg = reg_read(REG_DDR3_MR1_ADDR) &
REG_DDR3_MR1_OUTBUF_WL_MASK;
/* Set ODT Values */
reg &= REG_DDR3_MR1_ODT_MASK;
reg |= odt_static[dram_info->cs_ena][cs];
/* Enable WL MODE */
reg |= (1 << REG_DDR3_MR1_WL_ENA_OFFS);
/* [7]=1, [12]=0 - Output Buffer and write leveling enabled */
reg_write(REG_DDR3_MR1_ADDR, reg); /* 0x15D4 - DDR3 MR1 Register */
/* Issue MRS Command to current cs */
reg = REG_SDRAM_OPERATION_CMD_MR1 &
~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs));
/*
* [3-0] = 0x4 - MR1 Command, [11-8] -
* enable current cs
*/
/* 0x1418 - SDRAM Operation Register */
reg_write(REG_SDRAM_OPERATION_ADDR, reg);
udelay(MRS_DELAY);
/* Write leveling cs[cs] */
if (MV_OK !=
ddr3_write_leveling_single_cs(cs, freq, ratio_2to1,
(u32 *)(res + cs),
dram_info)) {
DEBUG_WL_FULL_C("DDR3 - Write Leveling single Cs - FAILED - Cs - ",
(u32) cs, 1);
for (pup = 0; pup < max_pup_num; pup++) {
if (((res[cs] >> pup) & 0x1) == 0) {
DEBUG_WL_C("Failed Byte : ",
pup, 1);
}
}
return MV_FAIL;
}
/* Set TrnWLDeUpd - After each CS is done */
reg = reg_read(REG_TRAINING_WL_ADDR) |
(1 << REG_TRAINING_WL_CS_DONE_OFFS);
/* 0x16AC - Training Write leveling register */
reg_write(REG_TRAINING_WL_ADDR, reg);
/*
* Debug message - Finished Write leveling cs[cs] -
* each PUP Fail/Success
*/
DEBUG_WL_FULL_C("DDR3 - Write Leveling - Finished Cs - ", (u32) cs,
1);
DEBUG_WL_FULL_C("DDR3 - Write Leveling - The Results: 1-PUP locked, 0-PUP failed -",
(u32) res[cs], 3);
/*
* Configure MR1 in cs[cs] - write leveling off (0),
* output buffer off (1)
*/
reg = reg_read(REG_DDR3_MR1_ADDR) &
REG_DDR3_MR1_OUTBUF_WL_MASK;
reg |= (1 << REG_DDR3_MR1_OUTBUF_DIS_OFFS);
/* No need to sort ODT since it is same CS */
/* 0x15D4 - DDR3 MR1 Register */
reg_write(REG_DDR3_MR1_ADDR, reg);
/* Issue MRS Command to current cs */
reg = REG_SDRAM_OPERATION_CMD_MR1 &
~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs));
/*
* [3-0] = 0x4 - MR1 Command, [11-8] -
* enable current cs
*/
/* 0x1418 - SDRAM Operation Register */
reg_write(REG_SDRAM_OPERATION_ADDR, reg);
udelay(MRS_DELAY);
}
}
/* Disable WL Mode */
/* [2]=1 - TrnWLMode - Disable */
reg = reg_read(REG_DRAM_TRAINING_2_ADDR);
reg |= (1 << REG_DRAM_TRAINING_2_WL_MODE_OFFS);
/* 0x15B8 - Training SW 2 Register */
reg_write(REG_DRAM_TRAINING_2_ADDR, reg);
/* Disable SW override - Must be in a different stage */
/* [0]=0 - Enable SW override */
reg = reg_read(REG_DRAM_TRAINING_2_ADDR);
reg &= ~(1 << REG_DRAM_TRAINING_2_SW_OVRD_OFFS);
/* 0x15B8 - Training SW 2 Register */
reg_write(REG_DRAM_TRAINING_2_ADDR, reg);
/* Set Output buffer-on to all CS and correct ODT values */
for (cs = 0; cs < MAX_CS; cs++) {
if (dram_info->cs_ena & (1 << cs)) {
reg = reg_read(REG_DDR3_MR1_ADDR) &
REG_DDR3_MR1_ODT_MASK;
reg &= REG_DDR3_MR1_OUTBUF_WL_MASK;
reg |= odt_static[dram_info->cs_ena][cs];
/* 0x15D0 - DDR3 MR1 Register */
reg_write(REG_DDR3_MR1_ADDR, reg);
/* Issue MRS Command to current cs */
reg = REG_SDRAM_OPERATION_CMD_MR1 &
~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs));
/*
* [3-0] = 0x4 - MR1 Command, [11-8] -
* enable current cs
*/
/* 0x1418 - SDRAM Operation Register */
reg_write(REG_SDRAM_OPERATION_ADDR, reg);
udelay(MRS_DELAY);
}
}
#ifdef MV88F67XX
/* Dynamic pad issue (BTS669) during WL */
if (dpde_flag) {
reg = reg_read(REG_DUNIT_CTRL_LOW_ADDR) |
(1 << REG_DUNIT_CTRL_LOW_DPDE_OFFS);
reg_write(REG_DUNIT_CTRL_LOW_ADDR, reg);
}
#endif
DEBUG_WL_FULL_S("DDR3 - Write Leveling - Finished WL procedure for all Cs\n");
return MV_OK;
}
#if !defined(MV88F672X)
/*
* Name: ddr3_write_leveling_sw
* Desc: Execute Write leveling phase by SW
* Args: freq - current sequence frequency
* dram_info - main struct
* Notes:
* Returns: MV_OK if success, MV_FAIL if fail.
*/
int ddr3_write_leveling_sw_reg_dimm(u32 freq, int ratio_2to1,
MV_DRAM_INFO *dram_info)
{
u32 reg, cs, cnt, pup;
u32 res[MAX_CS];
__maybe_unused int dpde_flag = 0;
/* Debug message - Start Write leveling procedure */
DEBUG_WL_S("DDR3 - Write Leveling - Starting SW WL procedure\n");
#ifdef MV88F67XX
/* Dynamic pad issue (BTS669) during WL */
reg = reg_read(REG_DUNIT_CTRL_LOW_ADDR);
if (reg & (1 << REG_DUNIT_CTRL_LOW_DPDE_OFFS)) {
dpde_flag = 1;
reg_write(REG_DUNIT_CTRL_LOW_ADDR,
reg & ~(1 << REG_DUNIT_CTRL_LOW_DPDE_OFFS));
}
#endif
/* If target freq = 400 move clock start point */
/* Write to control PUP to Control Deskew Regs */
if (freq <= DDR_400) {
for (pup = 0; pup <= dram_info->num_of_total_pups; pup++) {
/* PUP_DELAY_MASK 0x1F */
/* reg = 0x0C10001F + (uj << 16); */
ddr3_write_ctrl_pup_reg(1, pup, CNTRL_PUP_DESKEW + pup,
0x1F);
}
}
/* Set Output buffer-off to all CS and correct ODT values */
for (cs = 0; cs < MAX_CS; cs++) {
if (dram_info->cs_ena & (1 << cs)) {
reg = reg_read(REG_DDR3_MR1_ADDR) &
REG_DDR3_MR1_ODT_MASK;
reg |= odt_static[dram_info->cs_ena][cs];
reg |= (1 << REG_DDR3_MR1_OUTBUF_DIS_OFFS);
/* 0x15D0 - DDR3 MR0 Register */
reg_write(REG_DDR3_MR1_ADDR, reg);
/* Issue MRS Command to current cs */
reg = REG_SDRAM_OPERATION_CMD_MR1 &
~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs));
/*
* [3-0] = 0x4 - MR1 Command, [11-8] -
* enable current cs
*/
/* 0x1418 - SDRAM Operation Register */
reg_write(REG_SDRAM_OPERATION_ADDR, reg);
udelay(MRS_DELAY);
}
}
DEBUG_WL_FULL_S("DDR3 - Write Leveling - Qoff and RTT Values are set for all Cs\n");
/* Enable SW override */
reg = reg_read(REG_DRAM_TRAINING_2_ADDR) |
(1 << REG_DRAM_TRAINING_2_SW_OVRD_OFFS);
/* [0] = 1 - Enable SW override */
/* 0x15B8 - Training SW 2 Register */
reg_write(REG_DRAM_TRAINING_2_ADDR, reg);
DEBUG_WL_FULL_S("DDR3 - Write Leveling - SW Override Enabled\n");
/* Enable PHY write leveling mode */
reg = reg_read(REG_DRAM_TRAINING_2_ADDR) &
~(1 << REG_DRAM_TRAINING_2_WL_MODE_OFFS);
/* [2] = 0 - TrnWLMode - Enable */
/* 0x15B8 - Training SW 2 Register */
reg_write(REG_DRAM_TRAINING_2_ADDR, reg);
/* Loop for each cs */
for (cs = 0; cs < MAX_CS; cs++) {
if (dram_info->cs_ena & (1 << cs)) {
DEBUG_WL_FULL_C("DDR3 - Write Leveling - Starting working with Cs - ",
(u32) cs, 1);
/* Refresh X9 current cs */
DEBUG_WL_FULL_S("DDR3 - Write Leveling - Refresh X9\n");
for (cnt = 0; cnt < COUNT_WL_RFRS; cnt++) {
reg =
REG_SDRAM_OPERATION_CMD_RFRS & ~(1 <<
(REG_SDRAM_OPERATION_CS_OFFS
+ cs));
/* [3-0] = 0x2 - refresh, [11-8] - enable current cs */
reg_write(REG_SDRAM_OPERATION_ADDR, reg); /* 0x1418 - SDRAM Operation Register */
do {
reg =
((reg_read
(REG_SDRAM_OPERATION_ADDR)) &
REG_SDRAM_OPERATION_CMD_RFRS_DONE);
} while (reg); /* Wait for '0' */
}
/*
* Configure MR1 in Cs[CsNum] - write leveling on,
* output buffer on
*/
DEBUG_WL_FULL_S("DDR3 - Write Leveling - Configure MR1 for current Cs: WL-on,OB-on\n");
reg = reg_read(REG_DDR3_MR1_ADDR) &
REG_DDR3_MR1_OUTBUF_WL_MASK;
/* Set ODT Values */
reg &= REG_DDR3_MR1_ODT_MASK;
reg |= odt_static[dram_info->cs_ena][cs];
/* Enable WL MODE */
reg |= (1 << REG_DDR3_MR1_WL_ENA_OFFS);
/*
* [7]=1, [12]=0 - Output Buffer and write leveling
* enabled
*/
/* 0x15D4 - DDR3 MR1 Register */
reg_write(REG_DDR3_MR1_ADDR, reg);
/* Issue MRS Command to current cs */
reg = REG_SDRAM_OPERATION_CMD_MR1 &
~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs));
/*
* [3-0] = 0x4 - MR1 Command, [11-8] -
* enable current cs
*/
/* 0x1418 - SDRAM Operation Register */
reg_write(REG_SDRAM_OPERATION_ADDR, reg);
udelay(MRS_DELAY);
/* Write leveling cs[cs] */
if (MV_OK !=
ddr3_write_leveling_single_cs(cs, freq, ratio_2to1,
(u32 *)(res + cs),
dram_info)) {
DEBUG_WL_FULL_C("DDR3 - Write Leveling single Cs - FAILED - Cs - ",
(u32) cs, 1);
return MV_FAIL;
}
/* Set TrnWLDeUpd - After each CS is done */
reg = reg_read(REG_TRAINING_WL_ADDR) |
(1 << REG_TRAINING_WL_CS_DONE_OFFS);
/* 0x16AC - Training Write leveling register */
reg_write(REG_TRAINING_WL_ADDR, reg);
/*
* Debug message - Finished Write leveling cs[cs] -
* each PUP Fail/Success
*/
DEBUG_WL_FULL_C("DDR3 - Write Leveling - Finished Cs - ", (u32) cs,
1);
DEBUG_WL_FULL_C("DDR3 - Write Leveling - The Results: 1-PUP locked, 0-PUP failed -",
(u32) res[cs], 3);
/* Configure MR1 in cs[cs] - write leveling off (0), output buffer off (1) */
reg = reg_read(REG_DDR3_MR1_ADDR) &
REG_DDR3_MR1_OUTBUF_WL_MASK;
reg |= (1 << REG_DDR3_MR1_OUTBUF_DIS_OFFS);
/* No need to sort ODT since it is same CS */
/* 0x15D4 - DDR3 MR1 Register */
reg_write(REG_DDR3_MR1_ADDR, reg);
/* Issue MRS Command to current cs */
reg = REG_SDRAM_OPERATION_CMD_MR1 &
~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs));
/*
* [3-0] = 0x4 - MR1 Command, [11-8] -
* enable current cs
*/
/* 0x1418 - SDRAM Operation Register */
reg_write(REG_SDRAM_OPERATION_ADDR, reg);
udelay(MRS_DELAY);
}
}
/* Disable WL Mode */
/* [2]=1 - TrnWLMode - Disable */
reg = reg_read(REG_DRAM_TRAINING_2_ADDR);
reg |= (1 << REG_DRAM_TRAINING_2_WL_MODE_OFFS);
/* 0x15B8 - Training SW 2 Register */
reg_write(REG_DRAM_TRAINING_2_ADDR, reg);
/* Disable SW override - Must be in a different stage */
/* [0]=0 - Enable SW override */
reg = reg_read(REG_DRAM_TRAINING_2_ADDR);
reg &= ~(1 << REG_DRAM_TRAINING_2_SW_OVRD_OFFS);
/* 0x15B8 - Training SW 2 Register */
reg_write(REG_DRAM_TRAINING_2_ADDR, reg);
/* Set Output buffer-on to all CS and correct ODT values */
for (cs = 0; cs < MAX_CS; cs++) {
if (dram_info->cs_ena & (1 << cs)) {
reg = reg_read(REG_DDR3_MR1_ADDR) &
REG_DDR3_MR1_ODT_MASK;
reg &= REG_DDR3_MR1_OUTBUF_WL_MASK;
reg |= odt_static[dram_info->cs_ena][cs];
/* 0x15D0 - DDR3 MR1 Register */
reg_write(REG_DDR3_MR1_ADDR, reg);
/* Issue MRS Command to current cs */
reg = REG_SDRAM_OPERATION_CMD_MR1 &
~(1 << (REG_SDRAM_OPERATION_CS_OFFS + cs));
/*
* [3-0] = 0x4 - MR1 Command, [11-8] -
* enable current cs
*/
/* 0x1418 - SDRAM Operation Register */
reg_write(REG_SDRAM_OPERATION_ADDR, reg);
udelay(MRS_DELAY);
}
}
#ifdef MV88F67XX
/* Dynamic pad issue (BTS669) during WL */
if (dpde_flag) {
reg = reg_read(REG_DUNIT_CTRL_LOW_ADDR) |
(1 << REG_DUNIT_CTRL_LOW_DPDE_OFFS);
reg_write(REG_DUNIT_CTRL_LOW_ADDR, reg);
}
#endif
/* If target freq = 400 move clock back */
/* Write to control PUP to Control Deskew Regs */
if (freq <= DDR_400) {
for (pup = 0; pup <= dram_info->num_of_total_pups; pup++) {
ddr3_write_ctrl_pup_reg(1, pup, CNTRL_PUP_DESKEW + pup,
0);
}
}
DEBUG_WL_FULL_S("DDR3 - Write Leveling - Finished WL procedure for all Cs\n");
return MV_OK;
}
#endif
/*
* Name: ddr3_write_leveling_single_cs
* Desc: Execute Write leveling for single Chip select
* Args: cs - current chip select
* freq - current sequence frequency
* result - res array
* dram_info - main struct
* Notes:
* Returns: MV_OK if success, MV_FAIL if fail.
*/
static int ddr3_write_leveling_single_cs(u32 cs, u32 freq, int ratio_2to1,
u32 *result, MV_DRAM_INFO *dram_info)
{
u32 reg, pup_num, delay, phase, phaseMax, max_pup_num, pup,
max_pup_mask;
max_pup_num = dram_info->num_of_total_pups;
*result = 0;
u32 flag[MAX_PUP_NUM] = { 0 };
DEBUG_WL_FULL_C("DDR3 - Write Leveling Single Cs - WL for Cs - ",
(u32) cs, 1);
switch (max_pup_num) {
case 2:
max_pup_mask = 0x3;
break;
case 4:
max_pup_mask = 0xf;
DEBUG_WL_C("max_pup_mask = ", max_pup_mask, 3);
break;
case 5:
max_pup_mask = 0x1f;
DEBUG_WL_C("max_pup_mask = ", max_pup_mask, 3);
break;
case 8:
max_pup_mask = 0xff;
DEBUG_WL_C("max_pup_mask = ", max_pup_mask, 3);
break;
case 9:
max_pup_mask = 0x1ff;
DEBUG_WL_C("max_pup_mask = ", max_pup_mask, 3);
break;
default:
DEBUG_WL_C("ddr3_write_leveling_single_cs wrong max_pup_num = ",
max_pup_num, 3);
return MV_FAIL;
}
/* CS ODT Override */
reg = reg_read(REG_SDRAM_ODT_CTRL_HIGH_ADDR) &
REG_SDRAM_ODT_CTRL_HIGH_OVRD_MASK;
reg |= (REG_SDRAM_ODT_CTRL_HIGH_OVRD_ENA << (2 * cs));
/* Set 0x3 - Enable ODT on the curent cs and disable on other cs */
/* 0x1498 - SDRAM ODT Control high */
reg_write(REG_SDRAM_ODT_CTRL_HIGH_ADDR, reg);
DEBUG_WL_FULL_S("DDR3 - Write Leveling Single Cs - ODT Asserted for current Cs\n");
/* tWLMRD Delay */
/* Delay of minimum 40 Dram clock cycles - 20 Tclk cycles */
udelay(1);
/* [1:0] - current cs number */
reg = (reg_read(REG_TRAINING_WL_ADDR) & REG_TRAINING_WL_CS_MASK) | cs;
reg |= (1 << REG_TRAINING_WL_UPD_OFFS); /* [2] - trnWLCsUpd */
/* 0x16AC - Training Write leveling register */
reg_write(REG_TRAINING_WL_ADDR, reg);
/* Broadcast to all PUPs: Reset DQS phase, reset leveling delay */
ddr3_write_pup_reg(PUP_WL_MODE, cs, PUP_BC, 0, 0);
/* Seek Edge */
DEBUG_WL_FULL_S("DDR3 - Write Leveling Single Cs - Seek Edge - Current Cs\n");
/* Drive DQS high for one cycle - All data PUPs */
DEBUG_WL_FULL_S("DDR3 - Write Leveling Single Cs - Seek Edge - Driving DQS high for one cycle\n");
if (!ratio_2to1) {
reg = (reg_read(REG_TRAINING_WL_ADDR) &
REG_TRAINING_WL_RATIO_MASK) | REG_TRAINING_WL_1TO1;
} else {
reg = (reg_read(REG_TRAINING_WL_ADDR) &
REG_TRAINING_WL_RATIO_MASK) | REG_TRAINING_WL_2TO1;
}
/* 0x16AC - Training Write leveling register */
reg_write(REG_TRAINING_WL_ADDR, reg);
/* Wait tWLdelay */
do {
/* [29] - trnWLDelayExp */
reg = (reg_read(REG_TRAINING_WL_ADDR)) &
REG_TRAINING_WL_DELAYEXP_MASK;
} while (reg == 0x0); /* Wait for '1' */
/* Read WL res */
reg = (reg_read(REG_TRAINING_WL_ADDR) >> REG_TRAINING_WL_RESULTS_OFFS) &
REG_TRAINING_WL_RESULTS_MASK;
/* [28:20] - TrnWLResult */
if (!ratio_2to1) /* Different phase options for 2:1 or 1:1 modes */
phaseMax = MAX_PHASE_1TO1;
else
phaseMax = MAX_PHASE_2TO1;
DEBUG_WL_FULL_S("DDR3 - Write Leveling Single Cs - Seek Edge - Shift DQS + Octet Leveling\n");
/* Shift DQS + Octet leveling */
for (phase = 0; phase < phaseMax; phase++) {
for (delay = 0; delay < MAX_DELAY; delay++) {
/* Broadcast to all PUPs: DQS phase,leveling delay */
ddr3_write_pup_reg(PUP_WL_MODE, cs, PUP_BC, phase,
delay);
udelay(1); /* Delay of 3 Tclk cycles */
DEBUG_WL_FULL_S("DDR3 - Write Leveling Single Cs - Seek Edge: Phase = ");
DEBUG_WL_FULL_D((u32) phase, 1);
DEBUG_WL_FULL_S(", Delay = ");
DEBUG_WL_FULL_D((u32) delay, 1);
DEBUG_WL_FULL_S(", Counter = ");
DEBUG_WL_FULL_D((u32) i, 1);
DEBUG_WL_FULL_S("\n");
/* Drive DQS high for one cycle - All data PUPs */
if (!ratio_2to1) {
reg = (reg_read(REG_TRAINING_WL_ADDR) &
REG_TRAINING_WL_RATIO_MASK) |
REG_TRAINING_WL_1TO1;
} else {
reg = (reg_read(REG_TRAINING_WL_ADDR) &
REG_TRAINING_WL_RATIO_MASK) |
REG_TRAINING_WL_2TO1;
}
reg_write(REG_TRAINING_WL_ADDR, reg); /* 0x16AC */
/* Wait tWLdelay */
do {
reg = (reg_read(REG_TRAINING_WL_ADDR)) &
REG_TRAINING_WL_DELAYEXP_MASK;
} while (reg == 0x0); /* [29] Wait for '1' */
/* Read WL res */
reg = reg_read(REG_TRAINING_WL_ADDR);
reg = (reg >> REG_TRAINING_WL_RESULTS_OFFS) &
REG_TRAINING_WL_RESULTS_MASK; /* [28:20] */
DEBUG_WL_FULL_C("DDR3 - Write Leveling Single Cs - Seek Edge: Results = ",
(u32) reg, 3);
/* Update State machine */
for (pup = 0; pup < (max_pup_num); pup++) {
/* ECC support - bit 8 */
pup_num = (pup == dram_info->num_of_std_pups) ?
ECC_BIT : pup;
if (dram_info->wl_val[cs][pup][S] == 0) {
/* Update phase to PUP */
dram_info->wl_val[cs][pup][P] = phase;
/* Update delay to PUP */
dram_info->wl_val[cs][pup][D] = delay;
}
if (((reg >> pup_num) & 0x1) == 0)
flag[pup_num] = 1;
if (((reg >> pup_num) & 0x1)
&& (flag[pup_num] == 1)
&& (dram_info->wl_val[cs][pup][S] == 0)) {
/*
* If the PUP is locked now and in last
* counter states
*/
/* Go to next state */
dram_info->wl_val[cs][pup][S] = 1;
/* Set res */
*result = *result | (1 << pup_num);
}
}
/* If all locked - Break the loops - Finished */
if (*result == max_pup_mask) {
phase = phaseMax;
delay = MAX_DELAY;
DEBUG_WL_S("DDR3 - Write Leveling Single Cs - Seek Edge: All Locked\n");
}
}
}
/* Debug message - Print res for cs[i]: cs,PUP,Phase,Delay */
DEBUG_WL_C("DDR3 - Write Leveling - Results for CS - ", (u32) cs, 1);
for (pup = 0; pup < (max_pup_num); pup++) {
DEBUG_WL_S("DDR3 - Write Leveling - PUP: ");
DEBUG_WL_D((u32) pup, 1);
DEBUG_WL_S(", Phase: ");
DEBUG_WL_D((u32) dram_info->wl_val[cs][pup][P], 1);
DEBUG_WL_S(", Delay: ");
DEBUG_WL_D((u32) dram_info->wl_val[cs][pup][D], 2);
DEBUG_WL_S("\n");
}
/* Check if some not locked and return error */
if (*result != max_pup_mask) {
DEBUG_WL_S("DDR3 - Write Leveling - ERROR - not all PUPS were locked\n");
return MV_FAIL;
}
/* Configure Each PUP with locked leveling settings */
for (pup = 0; pup < (max_pup_num); pup++) {
/* ECC support - bit 8 */
pup_num = (pup == dram_info->num_of_std_pups) ? ECC_BIT : pup;
phase = dram_info->wl_val[cs][pup][P];
delay = dram_info->wl_val[cs][pup][D];
ddr3_write_pup_reg(PUP_WL_MODE, cs, pup_num, phase, delay);
}
/* CS ODT Override */
reg = reg_read(REG_SDRAM_ODT_CTRL_HIGH_ADDR) &
REG_SDRAM_ODT_CTRL_HIGH_OVRD_MASK;
/* 0x1498 - SDRAM ODT Control high */
reg_write(REG_SDRAM_ODT_CTRL_HIGH_ADDR, reg);
return MV_OK;
}
/*
* Perform DDR3 Control PUP Indirect Write
*/
static void ddr3_write_ctrl_pup_reg(int bc_acc, u32 pup, u32 reg_addr, u32 data)
{
u32 reg = 0;
/* Store value for write */
reg = (data & 0xFFFF);
/* Set bit 26 for control PHY access */
reg |= (1 << REG_PHY_CNTRL_OFFS);
/* Configure BC or UC access to PHYs */
if (bc_acc == 1)
reg |= (1 << REG_PHY_BC_OFFS);
else
reg |= (pup << REG_PHY_PUP_OFFS);
/* Set PHY register address to write to */
reg |= (reg_addr << REG_PHY_CS_OFFS);
reg_write(REG_PHY_REGISTRY_FILE_ACCESS_ADDR, reg); /* 0x16A0 */
reg |= REG_PHY_REGISTRY_FILE_ACCESS_OP_WR;
reg_write(REG_PHY_REGISTRY_FILE_ACCESS_ADDR, reg); /* 0x16A0 */
do {
reg = (reg_read(REG_PHY_REGISTRY_FILE_ACCESS_ADDR)) &
REG_PHY_REGISTRY_FILE_ACCESS_OP_DONE;
} while (reg); /* Wait for '0' to mark the end of the transaction */
}