| /dts-v1/; |
| /* Copyright (c) 2018-2021, The Linux Foundation. All rights reserved. |
| * |
| * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include "ipq5018.dtsi" |
| |
| / { |
| #address-cells = <0x2>; |
| #size-cells = <0x2>; |
| model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03.6-C1"; |
| compatible = "qcom,ipq5018-ap-mp03.6-c1", "qcom,ipq5018-mp03.6-c1", "qcom,ipq5018"; |
| interrupt-parent = <&intc>; |
| |
| aliases { |
| sdhc1 = &sdhc_1; /* SDC1 eMMC slot */ |
| serial0 = &blsp1_uart1; |
| }; |
| |
| chosen { |
| bootargs = "console=ttyMSM0,115200,n8 rw init=/init"; |
| #ifdef __IPQ_MEM_PROFILE_256_MB__ |
| bootargs-append = " swiotlb=1 clk_ignore_unused"; |
| #else |
| bootargs-append = " swiotlb=1 coherent_pool=2M clk_ignore_unused"; |
| #endif |
| stdout-path = "serial0"; |
| ethernet0 = "/soc/dp1"; |
| ethernet1 = "/soc/dp2"; |
| }; |
| |
| reserved-memory { |
| #ifdef __IPQ_MEM_PROFILE_256_MB__ |
| /* 256 MB Profile |
| * +=========+==============+========================+ |
| * | | | | |
| * | Region | Start Offset | Size | |
| * | | | | |
| * +--------+--------------+-------------------------+ |
| * | | | | |
| * | | | | |
| * | NSS | 0x40000000 | 8MB | |
| * | | | | |
| * | | | | |
| * +--------+--------------+-------------------------+ |
| * | | | | |
| * | | | | |
| * | | | | |
| * | | | | |
| * | Linux | 0x40800000 | Depends on total memory | |
| * | | | | |
| * | | | | |
| * | | | | |
| * + | | | |
| * +--------+--------------+-------------------------+ |
| * | | | | |
| * | uboot | 0x4A600000 | 4MB | |
| * | | | | |
| * +--------+--------------+-------------------------+ |
| * | SBL | 0x4AA00000 | 1MB | |
| * +--------+--------------+-------------------------+ |
| * | smem | 0x4AB00000 | 1MB | |
| * +--------+--------------+-------------------------+ |
| * | | | | |
| * | TZ | 0x4AC00000 | 4MB | |
| * | | | | |
| * +--------+--------------+-------------------------+ |
| * | | | | |
| * | | | | |
| * | | | | |
| * | Q6 | 0x4B000000 | 23MB | |
| * | | | | |
| * | | | | |
| * | | | | |
| * +--------+--------------+-------------------------+ |
| * | M3 Dump| 0x4C700000 | 1MB | |
| * +--------+--------------+-------------------------+ |
| * | QDSS | 0x4C800000 | 1MB | |
| * +--------+--------------+-------------------------+ |
| * | | | | |
| * |QCN9000 | 0x4C900000 | 17MB | |
| * | | | | |
| * +--------+--------------+-------------------------+ |
| * | | | | |
| * | MHI1 | 0x4DA00000 | 16MB | |
| * | | | | |
| * +--------+--------------+-------------------------+ |
| * | | |
| * | Rest of the memory for Linux | |
| * | | |
| * +=================================================+ |
| */ |
| q6_region: wcnss@4b000000 { |
| no-map; |
| reg = <0x0 0x4b000000 0x0 0x01700000>; |
| }; |
| |
| m3_dump@4c700000 { |
| no-map; |
| reg = <0x0 0x4C700000 0x0 0x100000>; |
| }; |
| |
| q6_etr_region:q6_etr_dump@4c800000 { |
| no-map; |
| reg = <0x0 0x4c800000 0x0 0x100000>; |
| }; |
| |
| qcn9000_pcie0@4c900000 { |
| no-map; |
| reg = <0x0 0x4C900000 0x0 0x01100000>; |
| }; |
| |
| mhi_region1: dma_pool1@4da00000 { |
| compatible = "shared-dma-pool"; |
| no-map; |
| reg = <0x0 0x4da00000 0x0 0x01000000>; |
| }; |
| #else |
| /* 512 MB Profile |
| * +=========+==============+========================+ |
| * | | | | |
| * | Region | Start Offset | Size | |
| * | | | | |
| * +--------+--------------+-------------------------+ |
| * | | | | |
| * | | | | |
| * | NSS | 0x40000000 | 16MB | |
| * | | | | |
| * | | | | |
| * +--------+--------------+-------------------------+ |
| * | | | | |
| * | | | | |
| * | | | | |
| * | | | | |
| * | Linux | 0x41000000 | Depends on total memory | |
| * | | | | |
| * | | | | |
| * | | | | |
| * | | | | |
| * +--------+--------------+-------------------------+ |
| * | | | | |
| * | uboot | 0x4A600000 | 4MB | |
| * | | | | |
| * +--------+--------------+-------------------------+ |
| * | SBL | 0x4AA00000 | 1MB | |
| * +--------+--------------+-------------------------+ |
| * | smem | 0x4AB00000 | 1MB | |
| * +--------+--------------+-------------------------+ |
| * | | | | |
| * | TZ | 0x4AC00000 | 4MB | |
| * | | | | |
| * +--------+--------------+-------------------------+ |
| * | | | | |
| * | | | | |
| * | | | | |
| * | Q6 | 0x4B000000 | 24MB | |
| * | | | | |
| * | | | | |
| * +--------+--------------+-------------------------+ |
| * | M3 Dump| 0x4C800000 | 1MB | |
| * +--------+--------------+-------------------------+ |
| * | QDSS | 0x4C900000 | 1MB | |
| * +--------+--------------+-------------------------+ |
| * | caldb | 0x4CA00000 | 2MB | |
| * +--------+--------------+-------------------------+ |
| * | | | | |
| * |QCN9000 | 0x4CC00000 | 30MB | |
| * | | | | |
| * +--------+--------------+-------------------------+ |
| * | | | | |
| * | MHI1 | 0x4EA00000 | 16MB | |
| * | | | | |
| * +--------+--------------+-------------------------+ |
| * | | |
| * | Rest of the memory for Linux | |
| * | | |
| * +=================================================+ |
| */ |
| q6_region: wcnss@4b000000 { |
| no-map; |
| reg = <0x0 0x4b000000 0x0 0x01800000>; |
| }; |
| |
| m3_dump@4c800000 { |
| no-map; |
| reg = <0x0 0x4c800000 0x0 0x100000>; |
| }; |
| |
| q6_etr_region:q6_etr_dump@4c900000 { |
| no-map; |
| reg = <0x0 0x4c900000 0x0 0x100000>; |
| }; |
| |
| q6_caldb_region:q6_caldb_region@4ca00000 { |
| no-map; |
| reg = <0x0 0x4ca00000 0x0 0x200000>; |
| }; |
| |
| qcn9000_pcie0@4cc00000 { |
| no-map; |
| reg = <0x0 0x4CC00000 0x0 0x01E00000>; |
| }; |
| |
| mhi_region1: dma_pool1@4ea00000 { |
| compatible = "shared-dma-pool"; |
| no-map; |
| reg = <0x0 0x4ea00000 0x0 0x01000000>; |
| }; |
| #endif |
| }; |
| |
| soc { |
| serial@78af000 { |
| status = "ok"; |
| }; |
| |
| qpic_bam: dma@7984000{ |
| status = "ok"; |
| }; |
| |
| nand: qpic-nand@79b0000 { |
| pinctrl-0 = <&qspi_nand_pins>; |
| pinctrl-names = "default"; |
| status = "ok"; |
| }; |
| |
| spi_0: spi@78b5000 { /* BLSP1 QUP0 */ |
| pinctrl-0 = <&blsp0_spi_pins>; |
| pinctrl-names = "default"; |
| cs-select = <0>; |
| status = "ok"; |
| |
| m25p80@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0>; |
| compatible = "n25q128a11"; |
| linux,modalias = "m25p80", "n25q128a11"; |
| spi-max-frequency = <50000000>; |
| use-default-sizes; |
| }; |
| }; |
| |
| mdio0: mdio@88000 { |
| status = "ok"; |
| |
| ethernet-phy@0 { |
| reg = <7>; |
| }; |
| }; |
| |
| mdio1: mdio@90000 { |
| status = "ok"; |
| pinctrl-0 = <&mdio1_pins>; |
| pinctrl-names = "default"; |
| phy-reset-gpio = <&tlmm 39 0>; |
| |
| ethernet-phy@0 { |
| reg = <28>; |
| }; |
| }; |
| |
| ess-instance { |
| num_devices = <0x1>; |
| ess-switch@0x39c00000 { |
| switch_mac_mode = <0xf>; /* mac mode for uniphy instance*/ |
| cmnblk_clk = "internal_96MHz"; /* cmnblk clk*/ |
| qcom,port_phyinfo { |
| port@0 { |
| port_id = <1>; |
| phy_address = <7>; |
| mdiobus = <&mdio0>; |
| }; |
| port@1 { |
| port_id = <2>; |
| phy_address = <0x1c>; |
| mdiobus = <&mdio1>; |
| port_mac_sel = "QGMAC_PORT"; |
| }; |
| }; |
| led_source@0 { |
| source = <0>; |
| mode = "normal"; |
| speed = "all"; |
| blink_en = "enable"; |
| active = "high"; |
| }; |
| }; |
| }; |
| |
| wifi0: wifi@c000000 { |
| status = "ok"; |
| }; |
| |
| dp1 { |
| device_type = "network"; |
| compatible = "qcom,nss-dp"; |
| clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>; |
| clock-names = "nss-snoc-gmac-axi-clk"; |
| qcom,id = <1>; |
| reg = <0x39C00000 0x10000>; |
| interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; |
| qcom,mactype = <2>; |
| qcom,link-poll = <1>; |
| qcom,phy-mdio-addr = <7>; |
| mdio-bus = <&mdio0>; |
| local-mac-address = [000000000000]; |
| phy-mode = "sgmii"; |
| qcom,rx-page-mode = <0>; |
| }; |
| |
| dp2 { |
| device_type = "network"; |
| compatible = "qcom,nss-dp"; |
| clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>; |
| clock-names = "nss-snoc-gmac-axi-clk"; |
| qcom,id = <2>; |
| reg = <0x39D00000 0x10000>; |
| interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; |
| qcom,mactype = <2>; |
| qcom,link-poll = <1>; |
| qcom,phy-mdio-addr = <28>; |
| mdio-bus = <&mdio1>; |
| local-mac-address = [000000000000]; |
| phy-mode = "sgmii"; |
| qcom,rx-page-mode = <0>; |
| }; |
| |
| qcom,test@0 { |
| status = "ok"; |
| }; |
| |
| nss-macsec1 { |
| compatible = "qcom,nss-macsec"; |
| phy_addr = <0x1c>; |
| mdiobus = <&mdio1>; |
| }; |
| |
| lpass: lpass@0xA000000{ |
| status = "disabled"; |
| }; |
| |
| pcm: pcm@0xA3C0000{ |
| status = "disabled"; |
| }; |
| |
| pcm_lb: pcm_lb@0 { |
| status = "disabled"; |
| }; |
| |
| }; |
| |
| thermal-zones { |
| status = "ok"; |
| }; |
| }; |
| |
| &tlmm { |
| pinctrl-0 = <&blsp0_uart_pins &pcie_sdx_gpio>; |
| pinctrl-names = "default"; |
| |
| blsp0_uart_pins: uart_pins { |
| blsp0_uart_rx_tx { |
| pins = "gpio20", "gpio21"; |
| function = "blsp0_uart0"; |
| bias-disable; |
| }; |
| }; |
| |
| blsp0_spi_pins: blsp0_spi_pins { |
| mux { |
| pins = "gpio10", "gpio11", "gpio12", "gpio13"; |
| function = "blsp0_spi"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| }; |
| |
| qspi_nand_pins: qspi_nand_pins { |
| qspi_clock { |
| pins = "gpio9"; |
| function = "qspi_clk"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| qspi_cs { |
| pins = "gpio8"; |
| function = "qspi_cs"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| qspi_data_0 { |
| pins = "gpio7"; |
| function = "qspi0"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| qspi_data_1 { |
| pins = "gpio6"; |
| function = "qspi1"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| qspi_data_2 { |
| pins = "gpio5"; |
| function = "qspi2"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| qspi_data_3 { |
| pins = "gpio4"; |
| function = "qspi3"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| }; |
| |
| mdio1_pins: mdio_pinmux { |
| mux_0 { |
| pins = "gpio36"; |
| function = "mdc"; |
| drive-strength = <8>; |
| bias-pull-up; |
| }; |
| |
| mux_1 { |
| pins = "gpio37"; |
| function = "mdio"; |
| drive-strength = <8>; |
| bias-pull-up; |
| }; |
| }; |
| |
| pcie_sdx_gpio: pcie_sdx_gpio { |
| ap2mdm_err_ftl { |
| pins = "gpio1"; |
| function = "gpio"; |
| drive-strength = <8>; |
| bias-pull-down; |
| }; |
| sdx_pon_gpio { |
| pins = "gpio26"; |
| function = "gpio"; |
| drive-strength = <8>; |
| bias-pull-up; |
| output-high; |
| }; |
| ap2mdm_gp_rst_n { |
| pins = "gpio28"; |
| function = "gpio"; |
| drive-strength = <8>; |
| output-high; |
| }; |
| }; |
| |
| ap2mdm_status: ap2mdm_status { |
| pins = "gpio25"; |
| function = "gpio"; |
| drive-strength = <8>; |
| bias-pull-up; |
| output-high; |
| }; |
| |
| mdm2ap_e911_status: mdm2ap_e911_status { |
| pins = "gpio0"; |
| drive-strength = <8>; |
| bias-pull-down; |
| }; |
| |
| pcie_wake_pins: pcie1_wake_gpio { |
| pins = "gpio19"; |
| function = "pcie1_wake"; |
| drive-strength = <8>; |
| bias-pull-up; |
| }; |
| |
| audio_pins: audio_pinmux { |
| mux_1 { |
| pins = "gpio23"; |
| drive-strength = <2>; |
| output-high; |
| }; |
| |
| mux_2 { |
| pins = "gpio24"; |
| function = "audio_rxbclk"; |
| drive-strength = <8>; |
| bias-pull-down; |
| }; |
| |
| mux_3 { |
| pins = "gpio25"; |
| function = "audio_rxfsync"; |
| drive-strength = <8>; |
| bias-pull-down; |
| }; |
| |
| mux_4 { |
| pins = "gpio26"; |
| function = "audio_rxd"; |
| drive-strength = <8>; |
| bias-pull-down; |
| }; |
| |
| mux_5 { |
| pins = "gpio27"; |
| function = "audio_txmclk"; |
| drive-strength = <8>; |
| bias-pull-down; |
| }; |
| |
| mux_6 { |
| pins = "gpio28"; |
| function = "audio_txbclk"; |
| drive-strength = <8>; |
| bias-pull-down; |
| }; |
| |
| mux_7 { |
| pins = "gpio29"; |
| function = "audio_txfsync"; |
| drive-strength = <8>; |
| bias-pull-down; |
| }; |
| |
| mux_8 { |
| pins = "gpio30"; |
| function = "audio_txd"; |
| drive-strength = <8>; |
| bias-pull-down; |
| }; |
| }; |
| |
| }; |
| |
| &usb3 { |
| status = "ok"; |
| device-power-gpio = <&tlmm 24 1>; |
| }; |
| |
| &pcie_x2 { |
| status = "ok"; |
| perst-gpio = <&tlmm 15 1>; |
| }; |
| |
| &dwc_0 { |
| /delete-property/ #phy-cells; |
| /delete-property/ phys; |
| /delete-property/ phy-names; |
| }; |
| |
| &hs_m31phy_0 { |
| status = "ok"; |
| }; |
| |
| &pcie_x2phy { |
| status = "ok"; |
| }; |
| |
| &pcie_x2_rp { |
| status = "ok"; |
| |
| mhi_1: qcom,mhi@1 { |
| reg = <0 0 0 0 0 >; |
| qrtr_instance_id = <0x20>; |
| #address-cells = <0x2>; |
| #size-cells = <0x2>; |
| memory-region = <&mhi_region1>; |
| }; |
| }; |
| |
| &q6v5_wcss { |
| #ifdef __IPQ_MEM_PROFILE_256_MB__ |
| memory-region = <&q6_region>, <&q6_etr_region>; |
| #else |
| memory-region = <&q6_region>, <&q6_etr_region>, |
| <&q6_caldb_region>; |
| #endif |
| }; |
| |
| &wifi0 { |
| /* IPQ5018 */ |
| qcom,bdf-addr = <0x4BA00000 0x4BA00000 0x4BA00000 |
| 0x0 0x0>; |
| qcom,caldb-addr = <0x4CA00000 0x4CA00000 0x0 0x0 0x0>; |
| qcom,caldb-size = <0x200000>; |
| qcom,board_id = <0x23>; |
| status = "ok"; |
| }; |
| |
| &wifi3 { |
| /* QCN9000 6G */ |
| compatible = "qcom,cnss-qcn9000"; |
| board_id = <0xa0>; |
| status = "ok"; |
| }; |