| /dts-v1/; |
| /* |
| * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include "ipq6018.dtsi" |
| |
| / { |
| #address-cells = <0x2>; |
| #size-cells = <0x2>; |
| model = "Qualcomm Technologies, Inc. IPQ6018/AP-CP02-C1"; |
| compatible = "qcom,ipq6018-ap-cp02-c1", "qcom,ipq6018"; |
| interrupt-parent = <&intc>; |
| qcom,msm-id = <0x192 0x0>, <0x193 0x0>; |
| |
| aliases { |
| serial0 = &blsp1_uart3; |
| sdhc1 = &sdhc_1; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| bootargs-append = " swiotlb=1"; |
| }; |
| }; |
| |
| &tlmm { |
| spi_0_pins: spi_0_pins { |
| pins = "gpio38", "gpio39", "gpio40", "gpio41"; |
| function = "blsp0_spi"; |
| drive-strength = <8>; |
| bias-pull-down; |
| }; |
| }; |
| |
| &blsp1_uart3 { |
| pinctrl-0 = <&serial_3_pins>; |
| pinctrl-names = "default"; |
| status = "ok"; |
| }; |
| |
| &spi_0 { |
| pinctrl-0 = <&spi_0_pins>; |
| pinctrl-names = "default"; |
| cs-select = <0>; |
| status = "ok"; |
| |
| m25p80@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0>; |
| compatible = "n25q128a11"; |
| linux,modalias = "m25p80", "n25q128a11"; |
| spi-max-frequency = <50000000>; |
| use-default-sizes; |
| }; |
| }; |
| |
| &qpic_bam { |
| status = "ok"; |
| }; |
| |
| &qpic_nand { |
| status = "ok"; |
| |
| nand@0 { |
| reg = <0>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| nand-ecc-strength = <4>; |
| nand-ecc-step-size = <512>; |
| nand-bus-width = <8>; |
| }; |
| }; |
| |
| &pcie_phy { |
| status = "ok"; |
| }; |
| |
| &pcie0 { |
| status = "ok"; |
| }; |
| |
| &sdhc_1 { |
| status = "ok"; |
| }; |
| |
| &qusb_phy_0 { |
| status = "ok"; |
| }; |
| |
| &ssphy_0 { |
| status = "ok"; |
| }; |
| |
| &usb3 { |
| status = "ok"; |
| }; |