| /* |
| * Copyright (c) 2017, The Linux Foundation. All rights reserved. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include "ipq8074-spmi-regulator.dtsi" |
| |
| &soc { |
| apc_apm: apm@b111000 { |
| compatible = "qcom,ipq807x-apm"; |
| reg = <0xb111000 0x1000>; |
| reg-names = "pm-apcc-glb"; |
| qcom,apm-post-halt-delay = <0x2>; |
| qcom,apm-halt-clk-delay = <0x11>; |
| qcom,apm-resume-clk-delay = <0x10>; |
| qcom,apm-sel-switch-delay = <0x01>; |
| }; |
| |
| apc_cpr: cpr4-ctrl@b018000 { |
| compatible = "qcom,cpr4-ipq807x-apss-regulator"; |
| reg = <0xb018000 0x4000>, <0xa4000 0x1000>, <0x0193d008 0x4>; |
| reg-names = "cpr_ctrl", "fuse_base", "cpr_tcsr_reg"; |
| interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "cpr"; |
| qcom,cpr-ctrl-name = "apc"; |
| qcom,cpr-sensor-time = <1000>; |
| qcom,cpr-loop-time = <5000000>; |
| qcom,cpr-idle-cycles = <15>; |
| qcom,cpr-step-quot-init-min = <12>; |
| qcom,cpr-step-quot-init-max = <14>; |
| qcom,cpr-count-mode = <0>; /* All-at-once */ |
| qcom,cpr-count-repeat = <14>; |
| qcom,cpr-down-error-step-limit = <1>; |
| qcom,cpr-up-error-step-limit = <1>; |
| qcom,apm-ctrl = <&apc_apm>; |
| qcom,apm-threshold-voltage = <848000>; |
| vdd-supply = <&s3>; |
| qcom,voltage-step = <8000>; |
| |
| thread@0 { |
| qcom,cpr-thread-id = <0>; |
| qcom,cpr-consecutive-up = <0>; |
| qcom,cpr-consecutive-down = <0>; |
| qcom,cpr-up-threshold = <4>; |
| qcom,cpr-down-threshold = <1>; |
| |
| apc_vreg: regulator { |
| regulator-name = "apc_corner"; |
| regulator-min-microvolt = <1>; |
| regulator-max-microvolt = <6>; |
| qcom,cpr-part-types = <2>; |
| qcom,cpr-parts-voltage = <1048000>; |
| qcom,cpr-parts-voltage-v2 = <992000>; |
| qcom,cpr-fuse-corners = <4>; |
| qcom,cpr-fuse-combos = <8>; |
| qcom,cpr-corners = <6>; |
| qcom,cpr-speed-bins = <1>; |
| qcom,cpr-speed-bin-corners = <6>; |
| qcom,cpr-corner-fmax-map = <1 3 5 6>; |
| qcom,allow-voltage-interpolation; |
| qcom,allow-quotient-interpolation; |
| qcom,cpr-scaled-open-loop-voltage-as-ceiling; |
| qcom,cpr-voltage-ceiling = |
| <840000 904000 944000 |
| 984000 992000 1064000>; |
| qcom,cpr-voltage-floor = |
| <592000 648000 712000 |
| 744000 784000 848000>; |
| qcom,corner-frequencies = |
| <1017600000 1382400000 1651200000 |
| 1843200000 1920000000 2208000000>; |
| |
| /* TT/FF parts i.e. turbo L1 OL voltage < 1048 mV */ |
| qcom,cpr-open-loop-voltage-fuse-adjustment-0 = |
| /* Speed bin 0; CPR rev 0..7 */ |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 12000>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>; |
| |
| /* SS parts i.e turbo L1 OL voltage >= 1048 mV */ |
| qcom,cpr-open-loop-voltage-fuse-adjustment-1 = |
| /* Speed bin 0; CPR rev 0..7 */ |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 20000 26000 0 20000>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>; |
| |
| /* v2 - FF parts i.e. turbo L1 OL voltage < 992 mV */ |
| qcom,cpr-open-loop-voltage-fuse-adjustment-v2-0 = |
| /* Speed bin 0; CPR rev 0..7 */ |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>; |
| |
| /* v2 - SS/TT parts i.e turbo L1 OL voltage >= 992 mV */ |
| qcom,cpr-open-loop-voltage-fuse-adjustment-v2-1 = |
| /* Speed bin 0; CPR rev 0..7 */ |
| < 0 0 0 0>, |
| < 0 7000 36000 4000>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>; |
| |
| /* v2 - FF parts i.e. turbo L1 OL voltage < 992 mV */ |
| qcom,cpr-closed-loop-voltage-adjustment-v2-0 = |
| /* Speed bin 0; CPR rev 0..7 */ |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>; |
| |
| /* v2 - SS/TT parts i.e turbo L1 OL voltage >= 992 mV */ |
| qcom,cpr-closed-loop-voltage-adjustment-v2-1 = |
| /* Speed bin 0; CPR rev 0..7 */ |
| < 0 0 0 0>, |
| < 0 0 19000 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>, |
| < 0 0 0 0>; |
| |
| qcom,cpr-ro-scaling-factor = |
| < 3970 4150 0 2280 2520 2470 2250 2280 |
| 2390 2330 2530 2500 850 2900 2510 2170 >, |
| < 3970 4150 0 2280 2520 2470 2250 2280 |
| 2390 2330 2530 2500 850 2900 2510 2170 >, |
| < 3970 4150 0 2280 2520 2470 2250 2280 |
| 2390 2330 2530 2500 850 2900 2510 2170 >, |
| < 3970 4150 0 2280 2520 2470 2250 2280 |
| 2390 2330 2530 2500 850 2900 2510 2170 >; |
| |
| qcom,cpr-floor-to-ceiling-max-range = |
| < 40000 40000 40000 40000 40000 40000>, |
| < 40000 40000 40000 40000 40000 40000>, |
| < 40000 40000 40000 40000 40000 40000>, |
| < 40000 40000 40000 40000 40000 40000>, |
| < 40000 40000 40000 40000 40000 40000>, |
| < 40000 40000 40000 40000 40000 40000>, |
| < 40000 40000 40000 40000 40000 40000>, |
| < 40000 40000 40000 40000 40000 40000>; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| |
| npu_cpr: npu-cpr { |
| compatible = "qcom,cpr3-ipq807x-npu-regulator"; |
| reg = <0xa4000 0x1000>, <0x0193d008 0x4>; |
| reg-names = "fuse_base", "cpr_tcsr_reg"; |
| qcom,cpr-ctrl-name = "npu"; |
| vdd-supply = <&s4>; |
| qcom,voltage-step = <8000>; |
| thread@0 { |
| qcom,cpr-thread-id = <0>; |
| qcom,cpr-consecutive-up = <0>; |
| qcom,cpr-consecutive-down = <2>; |
| qcom,cpr-up-threshold = <2>; |
| qcom,cpr-down-threshold = <1>; |
| |
| npu_vreg: regulator { |
| regulator-name = "npu_corner"; |
| regulator-min-microvolt = <1>; |
| regulator-max-microvolt = <3>; |
| qcom,cpr-part-types = <2>; |
| qcom,cpr-parts-voltage = <968000>; |
| qcom,cpr-parts-voltage-v2 = <832001>; |
| qcom,cpr-cold-temp-threshold-v2 = <30>; |
| qcom,cpr-fuse-corners = <2>; |
| qcom,cpr-fuse-combos = <1>; |
| qcom,cpr-corners = <2>; |
| qcom,cpr-speed-bins = <1>; |
| qcom,cpr-speed-bin-corners = <2>; |
| qcom,allow-voltage-interpolation; |
| qcom,cpr-corner-fmax-map = <1 2>; |
| qcom,cpr-voltage-ceiling = |
| <912000 992000>; |
| qcom,cpr-voltage-floor = |
| <752000 792000>; |
| qcom,corner-frequencies = |
| <1497600000 1689600000>; |
| |
| /* TT/FF parts i.e. turbo OL voltage < 968 mV */ |
| qcom,cpr-open-loop-voltage-fuse-adjustment-0 = |
| < 40000 40000>; |
| |
| /* SS parts i.e turbo OL voltage >= 968 mV */ |
| qcom,cpr-open-loop-voltage-fuse-adjustment-1 = |
| < 24000 24000>; |
| |
| /* FF parts i.e. turbo OL voltage <= 832 mV */ |
| qcom,cpr-open-loop-voltage-fuse-adjustment-v2-0= |
| <40000 40000>; |
| |
| /* TT/SS parts i.e turbo OL voltage > 832 mV */ |
| qcom,cpr-open-loop-voltage-fuse-adjustment-v2-1= |
| <40000 40000>; |
| |
| /* FF parts i.e. turbo OL voltage <= 832 mV */ |
| qcom,cpr-cold-temp-voltage-adjustment-v2-0 = |
| <0 0>; |
| |
| /* TT/SS parts i.e turbo OL voltage > 832 mV */ |
| qcom,cpr-cold-temp-voltage-adjustment-v2-1 = |
| <35000 27000>; |
| }; |
| }; |
| }; |
| }; |
