| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2013-2019, The Linux Foundation. All rights reserved. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/err.h> |
| #include <linux/sysfs.h> |
| #include <linux/mutex.h> |
| #include <linux/of.h> |
| #include <linux/coresight.h> |
| #include "coresight-qmi.h" |
| |
| #define REMOTE_ETM_TRACE_ID_START 192 |
| |
| #ifdef CONFIG_CORESIGHT_REMOTE_ETM_DEFAULT_ENABLE |
| static int boot_enable = CONFIG_CORESIGHT_REMOTE_ETM_DEFAULT_ENABLE; |
| #else |
| static int boot_enable; |
| #endif |
| |
| DEFINE_CORESIGHT_DEVLIST(remote_etm_devs, "remote-etm"); |
| |
| struct remote_etm_drvdata { |
| struct device *dev; |
| struct coresight_device *csdev; |
| struct mutex mutex; |
| struct qmi_handle handle; |
| uint32_t inst_id; |
| bool enable; |
| int traceid; |
| bool service_connected; |
| struct sockaddr_qrtr s_addr; |
| }; |
| |
| static int service_remote_etm_new_server(struct qmi_handle *qmi, |
| struct qmi_service *svc) |
| { |
| struct remote_etm_drvdata *drvdata = container_of(qmi, |
| struct remote_etm_drvdata, handle); |
| |
| drvdata->s_addr.sq_family = AF_QIPCRTR; |
| drvdata->s_addr.sq_node = svc->node; |
| drvdata->s_addr.sq_port = svc->port; |
| drvdata->service_connected = true; |
| dev_info(drvdata->dev, |
| "Connection established between QMI handle and %d service\n", |
| drvdata->inst_id); |
| |
| return 0; |
| } |
| |
| static void service_remote_etm_del_server(struct qmi_handle *qmi, |
| struct qmi_service *svc) |
| { |
| struct remote_etm_drvdata *drvdata = container_of(qmi, |
| struct remote_etm_drvdata, handle); |
| drvdata->service_connected = false; |
| dev_info(drvdata->dev, |
| "Connection disconnected between QMI handle and %d service\n", |
| drvdata->inst_id); |
| } |
| |
| static struct qmi_ops server_ops = { |
| .new_server = service_remote_etm_new_server, |
| .del_server = service_remote_etm_del_server, |
| }; |
| |
| static int remote_etm_enable(struct coresight_device *csdev, |
| struct perf_event *event, u32 mode) |
| { |
| struct remote_etm_drvdata *drvdata = |
| dev_get_drvdata(csdev->dev.parent); |
| struct coresight_set_etm_req_msg_v01 req; |
| struct coresight_set_etm_resp_msg_v01 resp = { { 0, 0 } }; |
| struct qmi_txn txn; |
| int ret; |
| |
| mutex_lock(&drvdata->mutex); |
| |
| if (!drvdata->service_connected) { |
| dev_err(drvdata->dev, "QMI service not connected!\n"); |
| ret = EINVAL; |
| goto err; |
| } |
| /* |
| * The QMI handle may be NULL in the following scenarios: |
| * 1. QMI service is not present |
| * 2. QMI service is present but attempt to enable remote ETM is earlier |
| * than service is ready to handle request |
| * 3. Connection between QMI client and QMI service failed |
| * |
| * Enable CoreSight without processing further QMI commands which |
| * provides the option to enable remote ETM by other means. |
| */ |
| req.state = CORESIGHT_ETM_STATE_ENABLED_V01; |
| |
| ret = qmi_txn_init(&drvdata->handle, &txn, |
| coresight_set_etm_resp_msg_v01_ei, |
| &resp); |
| |
| if (ret < 0) { |
| dev_err(drvdata->dev, "QMI tx init failed , ret:%d\n", |
| ret); |
| goto err; |
| } |
| |
| ret = qmi_send_request(&drvdata->handle, &drvdata->s_addr, |
| &txn, CORESIGHT_QMI_SET_ETM_REQ_V01, |
| CORESIGHT_QMI_SET_ETM_REQ_MAX_LEN, |
| coresight_set_etm_req_msg_v01_ei, |
| &req); |
| if (ret < 0) { |
| dev_err(drvdata->dev, "QMI send ACK failed, ret:%d\n", |
| ret); |
| qmi_txn_cancel(&txn); |
| goto err; |
| } |
| |
| ret = qmi_txn_wait(&txn, msecs_to_jiffies(TIMEOUT_MS)); |
| if (ret < 0) { |
| dev_err(drvdata->dev, "QMI qmi txn wait failed, ret:%d\n", |
| ret); |
| goto err; |
| } |
| |
| /* Check the response */ |
| if (resp.resp.result != QMI_RESULT_SUCCESS_V01) |
| dev_err(drvdata->dev, "QMI request failed 0x%x\n", |
| resp.resp.error); |
| |
| drvdata->enable = true; |
| mutex_unlock(&drvdata->mutex); |
| |
| dev_info(drvdata->dev, "Remote ETM tracing enabled for instance %d\n", |
| drvdata->inst_id); |
| return 0; |
| err: |
| mutex_unlock(&drvdata->mutex); |
| return ret; |
| } |
| |
| static void remote_etm_disable(struct coresight_device *csdev, |
| struct perf_event *event) |
| { |
| struct remote_etm_drvdata *drvdata = |
| dev_get_drvdata(csdev->dev.parent); |
| struct coresight_set_etm_req_msg_v01 req; |
| struct coresight_set_etm_resp_msg_v01 resp = { { 0, 0 } }; |
| struct qmi_txn txn; |
| int ret; |
| |
| mutex_lock(&drvdata->mutex); |
| if (!drvdata->service_connected) { |
| dev_err(drvdata->dev, "QMI service not connected!\n"); |
| goto err; |
| } |
| |
| req.state = CORESIGHT_ETM_STATE_DISABLED_V01; |
| |
| ret = qmi_txn_init(&drvdata->handle, &txn, |
| coresight_set_etm_resp_msg_v01_ei, |
| &resp); |
| |
| if (ret < 0) { |
| dev_err(drvdata->dev, "QMI tx init failed , ret:%d\n", |
| ret); |
| goto err; |
| } |
| |
| ret = qmi_send_request(&drvdata->handle, &drvdata->s_addr, |
| &txn, CORESIGHT_QMI_SET_ETM_REQ_V01, |
| CORESIGHT_QMI_SET_ETM_REQ_MAX_LEN, |
| coresight_set_etm_req_msg_v01_ei, |
| &req); |
| if (ret < 0) { |
| dev_err(drvdata->dev, "QMI send req failed, ret:%d\n", |
| ret); |
| qmi_txn_cancel(&txn); |
| goto err; |
| } |
| |
| ret = qmi_txn_wait(&txn, msecs_to_jiffies(TIMEOUT_MS)); |
| if (ret < 0) { |
| dev_err(drvdata->dev, "QMI qmi txn wait failed, ret:%d\n", |
| ret); |
| goto err; |
| } |
| |
| /* Check the response */ |
| if (resp.resp.result != QMI_RESULT_SUCCESS_V01) { |
| dev_err(drvdata->dev, "QMI request failed 0x%x\n", |
| resp.resp.error); |
| goto err; |
| } |
| |
| drvdata->enable = false; |
| dev_info(drvdata->dev, "Remote ETM tracing disabled for instance %d\n", |
| drvdata->inst_id); |
| err: |
| mutex_unlock(&drvdata->mutex); |
| } |
| |
| static int remote_etm_trace_id(struct coresight_device *csdev) |
| { |
| struct remote_etm_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); |
| |
| return drvdata->traceid; |
| } |
| |
| static const struct coresight_ops_source remote_etm_source_ops = { |
| .trace_id = remote_etm_trace_id, |
| .enable = remote_etm_enable, |
| .disable = remote_etm_disable, |
| }; |
| |
| static const struct coresight_ops remote_cs_ops = { |
| .source_ops = &remote_etm_source_ops, |
| }; |
| |
| static int remote_etm_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct coresight_platform_data *pdata; |
| struct remote_etm_drvdata *drvdata; |
| struct coresight_desc desc = {0 }; |
| int ret; |
| static int traceid = REMOTE_ETM_TRACE_ID_START; |
| |
| desc.name = coresight_alloc_device_name(&remote_etm_devs, dev); |
| if (!desc.name) |
| return -ENOMEM; |
| pdata = coresight_get_platform_data(dev); |
| if (IS_ERR(pdata)) |
| return PTR_ERR(pdata); |
| pdev->dev.platform_data = pdata; |
| |
| drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); |
| if (!drvdata) |
| return -ENOMEM; |
| |
| drvdata->dev = &pdev->dev; |
| platform_set_drvdata(pdev, drvdata); |
| |
| ret = of_property_read_u32(pdev->dev.of_node, "qcom,inst-id", |
| &drvdata->inst_id); |
| if (ret) |
| return ret; |
| |
| mutex_init(&drvdata->mutex); |
| |
| ret = qmi_handle_init(&drvdata->handle, |
| CORESIGHT_QMI_SET_ETM_REQ_MAX_LEN, |
| &server_ops, NULL); |
| if (ret < 0) { |
| dev_err(dev, "Remote ETM client init failed ret:%d\n", ret); |
| return ret; |
| } |
| |
| qmi_add_lookup(&drvdata->handle, |
| CORESIGHT_QMI_SVC_ID, |
| CORESIGHT_QMI_VERSION, |
| drvdata->inst_id); |
| |
| drvdata->traceid = traceid++; |
| |
| desc.type = CORESIGHT_DEV_TYPE_SOURCE; |
| desc.subtype.source_subtype = CORESIGHT_DEV_SUBTYPE_SOURCE_PROC; |
| desc.ops = &remote_cs_ops; |
| desc.pdata = pdev->dev.platform_data; |
| desc.dev = &pdev->dev; |
| drvdata->csdev = coresight_register(&desc); |
| if (IS_ERR(drvdata->csdev)) { |
| ret = PTR_ERR(drvdata->csdev); |
| goto err; |
| } |
| dev_info(dev, "Remote ETM initialized\n"); |
| |
| if (drvdata->inst_id >= sizeof(int)*BITS_PER_BYTE) |
| dev_err(dev, "inst_id greater than boot_enable bit mask\n"); |
| else if (boot_enable & BIT(drvdata->inst_id)) |
| coresight_enable(drvdata->csdev); |
| |
| return 0; |
| err: |
| qmi_handle_release(&drvdata->handle); |
| return ret; |
| } |
| |
| static int remote_etm_remove(struct platform_device *pdev) |
| { |
| struct remote_etm_drvdata *drvdata = platform_get_drvdata(pdev); |
| |
| qmi_handle_release(&drvdata->handle); |
| coresight_unregister(drvdata->csdev); |
| return 0; |
| } |
| |
| static const struct of_device_id remote_etm_match[] = { |
| {.compatible = "qcom,coresight-remote-etm"}, |
| {} |
| }; |
| |
| static struct platform_driver remote_etm_driver = { |
| .probe = remote_etm_probe, |
| .remove = remote_etm_remove, |
| .driver = { |
| .name = "coresight-remote-etm", |
| .of_match_table = remote_etm_match, |
| }, |
| }; |
| |
| int __init remote_etm_init(void) |
| { |
| return platform_driver_register(&remote_etm_driver); |
| } |
| module_init(remote_etm_init); |
| |
| void __exit remote_etm_exit(void) |
| { |
| platform_driver_unregister(&remote_etm_driver); |
| } |
| module_exit(remote_etm_exit); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("CoreSight Remote ETM driver"); |