| /* |
| * Marvell 88E6060 switch driver |
| * Copyright (c) 2008 Felix Fietkau <nbd@nbd.name> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License v2 as published by the |
| * Free Software Foundation |
| */ |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/errno.h> |
| #include <linux/unistd.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/spinlock.h> |
| #include <linux/mm.h> |
| #include <linux/module.h> |
| #include <linux/mii.h> |
| #include <linux/ethtool.h> |
| #include <linux/phy.h> |
| #include <linux/if_vlan.h> |
| #include <linux/version.h> |
| |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/uaccess.h> |
| #include "mvswitch.h" |
| |
| /* Undefine this to use trailer mode instead. |
| * I don't know if header mode works with all chips */ |
| #define HEADER_MODE 1 |
| |
| MODULE_DESCRIPTION("Marvell 88E6060 Switch driver"); |
| MODULE_AUTHOR("Felix Fietkau"); |
| MODULE_LICENSE("GPL"); |
| |
| #define MVSWITCH_MAGIC 0x88E6060 |
| |
| struct mvswitch_priv { |
| netdev_features_t orig_features; |
| u8 vlans[16]; |
| }; |
| |
| #define to_mvsw(_phy) ((struct mvswitch_priv *) (_phy)->priv) |
| |
| static inline u16 |
| r16(struct phy_device *phydev, int addr, int reg) |
| { |
| struct mii_bus *bus = phydev->mdio.bus; |
| |
| return bus->read(bus, addr, reg); |
| } |
| |
| static inline void |
| w16(struct phy_device *phydev, int addr, int reg, u16 val) |
| { |
| struct mii_bus *bus = phydev->mdio.bus; |
| |
| bus->write(bus, addr, reg, val); |
| } |
| |
| |
| static struct sk_buff * |
| mvswitch_mangle_tx(struct net_device *dev, struct sk_buff *skb) |
| { |
| struct mvswitch_priv *priv; |
| char *buf = NULL; |
| u16 vid; |
| |
| priv = dev->phy_ptr; |
| if (unlikely(!priv)) |
| goto error; |
| |
| if (unlikely(skb->len < 16)) |
| goto error; |
| |
| #ifdef HEADER_MODE |
| if (__vlan_hwaccel_get_tag(skb, &vid)) |
| goto error; |
| |
| if (skb_cloned(skb) || (skb->len <= 62) || (skb_headroom(skb) < MV_HEADER_SIZE)) { |
| if (pskb_expand_head(skb, MV_HEADER_SIZE, (skb->len < 62 ? 62 - skb->len : 0), GFP_ATOMIC)) |
| goto error_expand; |
| if (skb->len < 62) |
| skb->len = 62; |
| } |
| buf = skb_push(skb, MV_HEADER_SIZE); |
| #else |
| if (__vlan_get_tag(skb, &vid)) |
| goto error; |
| |
| if (unlikely((vid > 15 || !priv->vlans[vid]))) |
| goto error; |
| |
| if (skb->len <= 64) { |
| if (pskb_expand_head(skb, 0, 64 + MV_TRAILER_SIZE - skb->len, GFP_ATOMIC)) |
| goto error_expand; |
| |
| buf = skb->data + 64; |
| skb->len = 64 + MV_TRAILER_SIZE; |
| } else { |
| if (skb_cloned(skb) || unlikely(skb_tailroom(skb) < 4)) { |
| if (pskb_expand_head(skb, 0, 4, GFP_ATOMIC)) |
| goto error_expand; |
| } |
| buf = skb_put(skb, 4); |
| } |
| |
| /* move the ethernet header 4 bytes forward, overwriting the vlan tag */ |
| memmove(skb->data + 4, skb->data, 12); |
| skb->data += 4; |
| skb->len -= 4; |
| skb->mac_header += 4; |
| #endif |
| |
| if (!buf) |
| goto error; |
| |
| |
| #ifdef HEADER_MODE |
| /* prepend the tag */ |
| *((__be16 *) buf) = cpu_to_be16( |
| ((vid << MV_HEADER_VLAN_S) & MV_HEADER_VLAN_M) | |
| ((priv->vlans[vid] << MV_HEADER_PORTS_S) & MV_HEADER_PORTS_M) |
| ); |
| #else |
| /* append the tag */ |
| *((__be32 *) buf) = cpu_to_be32(( |
| (MV_TRAILER_OVERRIDE << MV_TRAILER_FLAGS_S) | |
| ((priv->vlans[vid] & MV_TRAILER_PORTS_M) << MV_TRAILER_PORTS_S) |
| )); |
| #endif |
| |
| return skb; |
| |
| error_expand: |
| if (net_ratelimit()) |
| printk("%s: failed to expand/update skb for the switch\n", dev->name); |
| |
| error: |
| /* any errors? drop the packet! */ |
| dev_kfree_skb_any(skb); |
| return NULL; |
| } |
| |
| static void |
| mvswitch_mangle_rx(struct net_device *dev, struct sk_buff *skb) |
| { |
| struct mvswitch_priv *priv; |
| unsigned char *buf; |
| int vlan = -1; |
| int i; |
| |
| priv = dev->phy_ptr; |
| if (WARN_ON_ONCE(!priv)) |
| return; |
| |
| #ifdef HEADER_MODE |
| buf = skb->data; |
| skb_pull(skb, MV_HEADER_SIZE); |
| #else |
| buf = skb->data + skb->len - MV_TRAILER_SIZE; |
| if (buf[0] != 0x80) |
| return; |
| #endif |
| |
| /* look for the vlan matching the incoming port */ |
| for (i = 0; i < ARRAY_SIZE(priv->vlans); i++) { |
| if ((1 << buf[1]) & priv->vlans[i]) |
| vlan = i; |
| } |
| |
| if (vlan == -1) |
| return; |
| |
| __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan); |
| } |
| |
| |
| static int |
| mvswitch_wait_mask(struct phy_device *pdev, int addr, int reg, u16 mask, u16 val) |
| { |
| int i = 100; |
| u16 r; |
| |
| do { |
| r = r16(pdev, addr, reg) & mask; |
| if (r == val) |
| return 0; |
| } while(--i > 0); |
| return -ETIMEDOUT; |
| } |
| |
| static int |
| mvswitch_config_init(struct phy_device *pdev) |
| { |
| struct mvswitch_priv *priv = to_mvsw(pdev); |
| struct net_device *dev = pdev->attached_dev; |
| u8 vlmap = 0; |
| int i; |
| |
| if (!dev) |
| return -EINVAL; |
| |
| printk("%s: Marvell 88E6060 PHY driver attached.\n", dev->name); |
| linkmode_zero(pdev->supported); |
| linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, pdev->supported); |
| linkmode_copy(pdev->advertising, pdev->supported); |
| dev->phy_ptr = priv; |
| pdev->irq = PHY_POLL; |
| #ifdef HEADER_MODE |
| dev->flags |= IFF_PROMISC; |
| #endif |
| |
| /* initialize default vlans */ |
| for (i = 0; i < MV_PORTS; i++) |
| priv->vlans[(i == MV_WANPORT ? 2 : 1)] |= (1 << i); |
| |
| /* before entering reset, disable all ports */ |
| for (i = 0; i < MV_PORTS; i++) |
| w16(pdev, MV_PORTREG(CONTROL, i), 0x00); |
| |
| msleep(2); /* wait for the status change to settle in */ |
| |
| /* put the ATU in reset */ |
| w16(pdev, MV_SWITCHREG(ATU_CTRL), MV_ATUCTL_RESET); |
| |
| i = mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_CTRL), MV_ATUCTL_RESET, 0); |
| if (i < 0) { |
| printk("%s: Timeout waiting for the switch to reset.\n", dev->name); |
| return i; |
| } |
| |
| /* set the ATU flags */ |
| w16(pdev, MV_SWITCHREG(ATU_CTRL), |
| MV_ATUCTL_NO_LEARN | |
| MV_ATUCTL_ATU_1K | |
| MV_ATUCTL_AGETIME(MV_ATUCTL_AGETIME_MIN) /* minimum without disabling ageing */ |
| ); |
| |
| /* initialize the cpu port */ |
| w16(pdev, MV_PORTREG(CONTROL, MV_CPUPORT), |
| #ifdef HEADER_MODE |
| MV_PORTCTRL_HEADER | |
| #else |
| MV_PORTCTRL_RXTR | |
| MV_PORTCTRL_TXTR | |
| #endif |
| MV_PORTCTRL_ENABLED |
| ); |
| /* wait for the phy change to settle in */ |
| msleep(2); |
| for (i = 0; i < MV_PORTS; i++) { |
| u8 pvid = 0; |
| int j; |
| |
| vlmap = 0; |
| |
| /* look for the matching vlan */ |
| for (j = 0; j < ARRAY_SIZE(priv->vlans); j++) { |
| if (priv->vlans[j] & (1 << i)) { |
| vlmap = priv->vlans[j]; |
| pvid = j; |
| } |
| } |
| /* leave port unconfigured if it's not part of a vlan */ |
| if (!vlmap) |
| continue; |
| |
| /* add the cpu port to the allowed destinations list */ |
| vlmap |= (1 << MV_CPUPORT); |
| |
| /* take port out of its own vlan destination map */ |
| vlmap &= ~(1 << i); |
| |
| /* apply vlan settings */ |
| w16(pdev, MV_PORTREG(VLANMAP, i), |
| MV_PORTVLAN_PORTS(vlmap) | |
| MV_PORTVLAN_ID(i) |
| ); |
| |
| /* re-enable port */ |
| w16(pdev, MV_PORTREG(CONTROL, i), |
| MV_PORTCTRL_ENABLED |
| ); |
| } |
| |
| w16(pdev, MV_PORTREG(VLANMAP, MV_CPUPORT), |
| MV_PORTVLAN_ID(MV_CPUPORT) |
| ); |
| |
| /* set the port association vector */ |
| for (i = 0; i <= MV_PORTS; i++) { |
| w16(pdev, MV_PORTREG(ASSOC, i), |
| MV_PORTASSOC_PORTS(1 << i) |
| ); |
| } |
| |
| /* init switch control */ |
| w16(pdev, MV_SWITCHREG(CTRL), |
| MV_SWITCHCTL_MSIZE | |
| MV_SWITCHCTL_DROP |
| ); |
| |
| dev->eth_mangle_rx = mvswitch_mangle_rx; |
| dev->eth_mangle_tx = mvswitch_mangle_tx; |
| priv->orig_features = dev->features; |
| |
| #ifdef HEADER_MODE |
| dev->priv_flags |= IFF_NO_IP_ALIGN; |
| dev->features |= NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_TX; |
| #else |
| dev->features |= NETIF_F_HW_VLAN_CTAG_RX; |
| #endif |
| |
| return 0; |
| } |
| |
| static int |
| mvswitch_read_status(struct phy_device *pdev) |
| { |
| pdev->speed = SPEED_100; |
| pdev->duplex = DUPLEX_FULL; |
| pdev->link = 1; |
| |
| /* XXX ugly workaround: we can't force the switch |
| * to gracefully handle hosts moving from one port to another, |
| * so we have to regularly clear the ATU database */ |
| |
| /* wait for the ATU to become available */ |
| mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_OP), MV_ATUOP_INPROGRESS, 0); |
| |
| /* flush the ATU */ |
| w16(pdev, MV_SWITCHREG(ATU_OP), |
| MV_ATUOP_INPROGRESS | |
| MV_ATUOP_FLUSH_ALL |
| ); |
| |
| /* wait for operation to complete */ |
| mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_OP), MV_ATUOP_INPROGRESS, 0); |
| |
| return 0; |
| } |
| |
| static int |
| mvswitch_aneg_done(struct phy_device *phydev) |
| { |
| return 1; /* Return any positive value */ |
| } |
| |
| static int |
| mvswitch_config_aneg(struct phy_device *phydev) |
| { |
| return 0; |
| } |
| |
| static void |
| mvswitch_detach(struct phy_device *pdev) |
| { |
| struct mvswitch_priv *priv = to_mvsw(pdev); |
| struct net_device *dev = pdev->attached_dev; |
| |
| if (!dev) |
| return; |
| |
| dev->phy_ptr = NULL; |
| dev->eth_mangle_rx = NULL; |
| dev->eth_mangle_tx = NULL; |
| dev->features = priv->orig_features; |
| dev->priv_flags &= ~IFF_NO_IP_ALIGN; |
| } |
| |
| static void |
| mvswitch_remove(struct phy_device *pdev) |
| { |
| struct mvswitch_priv *priv = to_mvsw(pdev); |
| |
| kfree(priv); |
| } |
| |
| static int |
| mvswitch_probe(struct phy_device *pdev) |
| { |
| struct mvswitch_priv *priv; |
| |
| priv = kzalloc(sizeof(struct mvswitch_priv), GFP_KERNEL); |
| if (priv == NULL) |
| return -ENOMEM; |
| |
| pdev->priv = priv; |
| |
| return 0; |
| } |
| |
| static int |
| mvswitch_fixup(struct phy_device *dev) |
| { |
| struct mii_bus *bus = dev->mdio.bus; |
| u16 reg; |
| |
| if (dev->mdio.addr != 0x10) |
| return 0; |
| |
| reg = bus->read(bus, MV_PORTREG(IDENT, 0)) & MV_IDENT_MASK; |
| if (reg != MV_IDENT_VALUE) |
| return 0; |
| |
| dev->phy_id = MVSWITCH_MAGIC; |
| return 0; |
| } |
| |
| |
| static struct phy_driver mvswitch_driver = { |
| .name = "Marvell 88E6060", |
| .phy_id = MVSWITCH_MAGIC, |
| .phy_id_mask = 0xffffffff, |
| .features = PHY_BASIC_FEATURES, |
| .probe = &mvswitch_probe, |
| .remove = &mvswitch_remove, |
| .detach = &mvswitch_detach, |
| .config_init = &mvswitch_config_init, |
| .config_aneg = &mvswitch_config_aneg, |
| .aneg_done = &mvswitch_aneg_done, |
| .read_status = &mvswitch_read_status, |
| }; |
| |
| static int __init |
| mvswitch_init(void) |
| { |
| phy_register_fixup_for_id(PHY_ANY_ID, mvswitch_fixup); |
| return phy_driver_register(&mvswitch_driver, THIS_MODULE); |
| } |
| |
| static void __exit |
| mvswitch_exit(void) |
| { |
| phy_driver_unregister(&mvswitch_driver); |
| } |
| |
| module_init(mvswitch_init); |
| module_exit(mvswitch_exit); |