| /* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ |
| /* |
| * arch/arm/cpu/armv8/txl/clock.c |
| * |
| * Copyright (C) 2020 Amlogic, Inc. All rights reserved. |
| * |
| */ |
| |
| #include <config.h> |
| #include <common.h> |
| #include <asm/arch/io.h> |
| #include <asm/arch/secure_apb.h> |
| #include <asm/arch/clock.h> |
| |
| /* !!must use nonzero value as default value. Otherwise it linked to bss segment, |
| but this segment not cleared to zero while running "board_init_f" */ |
| #define CLK_UNKNOWN (0xffffffff) |
| |
| #if 0 |
| __u32 get_rate_xtal(void) |
| { |
| unsigned long clk; |
| clk = (readl(P_PREG_CTLREG0_ADDR) >> 4) & 0x3f; |
| clk = clk * 1000 * 1000; |
| return clk; |
| } |
| |
| |
| __u32 get_cpu_clk(void) |
| { |
| static __u32 sys_freq=CLK_UNKNOWN; |
| if (sys_freq == CLK_UNKNOWN) |
| { |
| sys_freq=(clk_util_clk_msr(SYS_PLL_CLK)*1000000); |
| } |
| return sys_freq; |
| } |
| |
| __u32 get_clk_ddr(void) |
| { |
| static __u32 freq=CLK_UNKNOWN; |
| if (freq == CLK_UNKNOWN) |
| { |
| freq=(clk_util_clk_msr(DDR_PLL_CLK)*1000000); |
| } |
| return freq; |
| } |
| |
| __u32 get_clk_ethernet_pad(void) |
| { |
| static __u32 freq=CLK_UNKNOWN; |
| if (freq == CLK_UNKNOWN) |
| { |
| freq=(clk_util_clk_msr(MOD_ETH_CLK50_I)*1000000); |
| } |
| return freq; |
| } |
| |
| __u32 get_clk_cts_eth_rmii(void) |
| { |
| static __u32 freq=CLK_UNKNOWN; |
| if (freq == CLK_UNKNOWN) |
| { |
| freq=(clk_util_clk_msr(CTS_ETH_RMII)*1000000); |
| } |
| return freq; |
| } |
| |
| __u32 get_misc_pll_clk(void) |
| { |
| static __u32 freq=CLK_UNKNOWN; |
| if (freq == CLK_UNKNOWN) |
| { |
| freq=(clk_util_clk_msr(MISC_PLL_CLK)*1000000); |
| } |
| return freq; |
| } |
| #endif |
| |
| __u32 get_clk81(void) |
| { |
| static __u32 clk81_freq=CLK_UNKNOWN; |
| if (clk81_freq == CLK_UNKNOWN) |
| { |
| clk81_freq=(clk_util_clk_msr(CLK81)*1000000); |
| } |
| return clk81_freq; |
| } |
| |
| struct __clk_rate{ |
| unsigned clksrc; |
| __u32 (*get_rate)(void); |
| }; |
| |
| struct __clk_rate clkrate[]={ |
| { |
| .clksrc=CLK81, |
| .get_rate=get_clk81, |
| }, |
| }; |
| |
| int clk_get_rate(unsigned clksrc) |
| { |
| int i; |
| for (i = 0; i < sizeof(clkrate)/sizeof(clkrate[0]); i++) |
| { |
| if (clksrc == clkrate[i].clksrc) |
| return clkrate[i].get_rate(); |
| } |
| return -1; |
| } |
| |
| static const char* clk_table[] = { |
| [88] = "hdmirx_vid_clk ", |
| [87] = "lvds_fifo_clk ", |
| [86] = "hdmirx_phy_dtb[3] ", |
| [85] = "hdmirx_phy_dtb[2] ", |
| [84] = "hdmirx_phy_dtb[1] ", |
| [83] = "hdmirx_phy_dtb[0] ", |
| [82] = "Cts_ge2d_clk ", |
| [81] = "Cts_vapbclk ", |
| [80] = "Rng_ring_osc_clk[3] ", |
| [79] = "Rng_ring_osc_clk[2] ", |
| [78] = "Rng_ring_osc_clk[1] ", |
| [77] = "Rng_ring_osc_clk[0] ", |
| [76] = "cts_aoclk_int ", |
| [75] = "cts_aoclkx2_int ", |
| [74] = "cts_atv_dmd_vdac_clk ", |
| [73] = "cts_pwm_C_clk ", |
| [72] = "cts_pwm_D_clk ", |
| [71] = "cts_pwm_E_clk ", |
| [70] = "cts_pwm_F_clk ", |
| [69] = "Cts_hdcp22_skp ", |
| [68] = "Cts_hdcp22_esm ", |
| [67] = "tvfe_sample_clk ", |
| [66] = "cts_vid_lock_clk ", |
| [65] = "cts_atv_dmd_sys_clk ", |
| [64] = "Cts_hdmirx_cfg_clk ", |
| [63] = "adc_dpll_intclk ", |
| [62] = "cts_hevc_clk ", |
| [61] = "gpio_clk_msr ", |
| [60] = "alt_32k_clk ", |
| [59] = "cts_hcodec_clk ", |
| [58] = "Hdmirx_aud_clk ", |
| [57] = "Cts_hdmirx_audmeas ", |
| [56] = "Cts_hdmirx_modet_clk ", |
| [55] = "vid_pll_div_clk_out ", |
| [54] = "Cts_hdmirx_arc_ref_clk ", |
| [53] = "sd_emmc_clk_A ", |
| [52] = "sd_emmc_clk_B ", |
| [51] = "sd_emmc_clk_C ", |
| [50] = "mp3_clk_out ", |
| [49] = "mp2_clk_out ", |
| [48] = "mp1_clk_out ", |
| [47] = "ddr_dpll_pt_clk ", |
| [46] = "cts_vpu_clk ", |
| [45] = "cts_pwm_A_clk ", |
| [44] = "cts_pwm_B_clk ", |
| [43] = "fclk_div5 ", |
| [42] = "mp0_clk_out ", |
| [41] = "eth_rx_clk_rmii ", |
| [40] = "cts_pcm_mclk ", |
| [39] = "cts_pcm_sclk ", |
| [38] = "Cts_vdin_meas_clk ", |
| [37] = "cts_clk_i958 ", |
| [36] = "cts_hdmi_tx_pixel_clk ", |
| [35] = "cts_mali_clk ", |
| [34] = "adc_dpll_clk_b3 ", |
| [33] = "adc_dpll_clk_b2 ", |
| [32] = "cts_vdec_clk ", |
| [31] = "MPLL_CLK_TEST_OUT ", |
| [30] = "Hdmirx_audmeas_clk ", |
| [29] = "Hdmirx_pix_clk ", |
| [28] = "Cts_sar_adc_clk ", |
| [27] = "Hdmirx_mpll_div_clk ", |
| [26] = "sc_clk_int ", |
| [25] = "Hdmirx_tmds_clk ", |
| [24] = "Hdmirx_aud_pll_clk ", |
| [23] = "mmc_clk ", |
| [22] = "eth_phy_ref_clk ", |
| [21] = "i2s_clk_in_src0 ", |
| [20] = "rtc_osc_clk_out ", |
| [19] = "adc_dpll_clka2 ", |
| [18] = "sys_cpu_clk_div16 ", |
| [17] = "sys_pll_div16 ", |
| [16] = "cts_FEC_CLK_2 ", |
| [15] = "cts_FEC_CLK_1 ", |
| [14] = "cts_FEC_CLK_0 ", |
| [13] = "cts_amclk ", |
| [12] = "Cts_demod_core_clk ", |
| [11] = "mac_eth_tx_clk ", |
| [10] = "cts_vdac_clk ", |
| [9] = "cts_encl_clk ", |
| [8] = "cts_encp_clk ", |
| [7] = "clk81 ", |
| [6] = "cts_enci_clk ", |
| [5] = "gp1_pll_clk ", |
| [4] = "gp0_pll_clk ", |
| [3] = "A53_ring_osc_clk ", |
| [2] = "am_ring_osc_clk_out_ee[2] ", |
| [1] = "am_ring_osc_clk_out_ee[1] ", |
| [0] = "am_ring_osc_clk_out_ee[0] ", |
| }; |
| |
| unsigned long clk_util_clk_msr(unsigned long clk_mux) |
| { |
| unsigned int regval = 0; |
| |
| WRITE_CBUS_REG(MSR_CLK_REG0, 0); |
| /* Set the measurement gate to 64uS */ |
| CLEAR_CBUS_REG_MASK(MSR_CLK_REG0, 0xffff); |
| /* 64uS is enough for measure the frequence? */ |
| SET_CBUS_REG_MASK(MSR_CLK_REG0, (64 - 1)); |
| /* Disable continuous measurement */ |
| /* Disable interrupts */ |
| CLEAR_CBUS_REG_MASK(MSR_CLK_REG0, ((1 << 18) | (1 << 17))); |
| CLEAR_CBUS_REG_MASK(MSR_CLK_REG0, (0x7f << 20)); |
| SET_CBUS_REG_MASK(MSR_CLK_REG0, (clk_mux << 20) | /* Select MUX */ |
| (1 << 19) | /* enable the clock */ |
| (1 << 16)); /* enable measuring */ |
| /* Wait for the measurement to be done */ |
| regval = READ_CBUS_REG(MSR_CLK_REG0); |
| do { |
| regval = READ_CBUS_REG(MSR_CLK_REG0); |
| } while (regval & (1 << 31)); |
| |
| /* Disable measuring */ |
| CLEAR_CBUS_REG_MASK(MSR_CLK_REG0, (1 << 16)); |
| regval = (READ_CBUS_REG(MSR_CLK_REG2) + 31) & 0x000FFFFF; |
| |
| return (regval >> 6); |
| } |
| |
| int clk_msr(int index) |
| { |
| unsigned int index_total = sizeof(clk_table) / sizeof(char *); |
| |
| int i; |
| if (index == 0xff) { |
| for (i = 0; i < index_total; i++) |
| printf("[%4d][%4ld MHz] %s\n", i, clk_util_clk_msr(i), clk_table[i]); |
| } |
| else { |
| if (index >= index_total) { |
| printf("clk msr legal range: [0-%d]\n", index_total-1); |
| return -1; |
| } |
| printf("[%4d][%4ld MHz] %s\n", index, clk_util_clk_msr(index), clk_table[index]); |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_AML_SPICC |
| /* generic clock control for spicc. |
| * if deleted, you have to add it into all txl board files as necessary. |
| */ |
| int spicc_clk_enable(bool enable) |
| { |
| u32 regv; |
| |
| regv = readl(P_HHI_GCLK_MPEG0); |
| if (enable) |
| regv |= 1 << 8; |
| else |
| regv &= ~(1 << 8); |
| writel(regv, P_HHI_GCLK_MPEG0); |
| return 0; |
| } |
| #endif /* CONFIG_AML_SPICC */ |