| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright 2018 NXP |
| */ |
| |
| #ifndef SC_PAD_API_H |
| #define SC_PAD_API_H |
| |
| /* Defines for sc_pad_config_t */ |
| #define SC_PAD_CONFIG_NORMAL 0U /* Normal */ |
| #define SC_PAD_CONFIG_OD 1U /* Open Drain */ |
| #define SC_PAD_CONFIG_OD_IN 2U /* Open Drain and input */ |
| #define SC_PAD_CONFIG_OUT_IN 3U /* Output and input */ |
| |
| /* Defines for sc_pad_iso_t */ |
| #define SC_PAD_ISO_OFF 0U /* ISO latch is transparent */ |
| #define SC_PAD_ISO_EARLY 1U /* Follow EARLY_ISO */ |
| #define SC_PAD_ISO_LATE 2U /* Follow LATE_ISO */ |
| #define SC_PAD_ISO_ON 3U /* ISO latched data is held */ |
| |
| /* Defines for sc_pad_28fdsoi_dse_t */ |
| #define SC_PAD_28FDSOI_DSE_18V_1MA 0U /* Drive strength of 1mA for 1.8v */ |
| #define SC_PAD_28FDSOI_DSE_18V_2MA 1U /* Drive strength of 2mA for 1.8v */ |
| #define SC_PAD_28FDSOI_DSE_18V_4MA 2U /* Drive strength of 4mA for 1.8v */ |
| #define SC_PAD_28FDSOI_DSE_18V_6MA 3U /* Drive strength of 6mA for 1.8v */ |
| #define SC_PAD_28FDSOI_DSE_18V_8MA 4U /* Drive strength of 8mA for 1.8v */ |
| #define SC_PAD_28FDSOI_DSE_18V_10MA 5U /* Drive strength of 10mA for 1.8v */ |
| #define SC_PAD_28FDSOI_DSE_18V_12MA 6U /* Drive strength of 12mA for 1.8v */ |
| #define SC_PAD_28FDSOI_DSE_18V_HS 7U /* High-speed for 1.8v */ |
| #define SC_PAD_28FDSOI_DSE_33V_2MA 0U /* Drive strength of 2mA for 3.3v */ |
| #define SC_PAD_28FDSOI_DSE_33V_4MA 1U /* Drive strength of 4mA for 3.3v */ |
| #define SC_PAD_28FDSOI_DSE_33V_8MA 2U /* Drive strength of 8mA for 3.3v */ |
| #define SC_PAD_28FDSOI_DSE_33V_12MA 3U /* Drive strength of 12mA for 3.3v */ |
| #define SC_PAD_28FDSOI_DSE_DV_HIGH 0U /* High drive strength dual volt */ |
| #define SC_PAD_28FDSOI_DSE_DV_LOW 1U /* Low drive strength dual volt */ |
| |
| /* Defines for sc_pad_28fdsoi_ps_t */ |
| #define SC_PAD_28FDSOI_PS_KEEPER 0U /* Bus-keeper (only valid for 1.8v) */ |
| #define SC_PAD_28FDSOI_PS_PU 1U /* Pull-up */ |
| #define SC_PAD_28FDSOI_PS_PD 2U /* Pull-down */ |
| #define SC_PAD_28FDSOI_PS_NONE 3U /* No pull (disabled) */ |
| |
| /* Defines for sc_pad_28fdsoi_pus_t */ |
| #define SC_PAD_28FDSOI_PUS_30K_PD 0U /* 30K pull-down */ |
| #define SC_PAD_28FDSOI_PUS_100K_PU 1U /* 100K pull-up */ |
| #define SC_PAD_28FDSOI_PUS_3K_PU 2U /* 3K pull-up */ |
| #define SC_PAD_28FDSOI_PUS_30K_PU 3U /* 30K pull-up */ |
| |
| /* Defines for sc_pad_wakeup_t */ |
| #define SC_PAD_WAKEUP_OFF 0U /* Off */ |
| #define SC_PAD_WAKEUP_CLEAR 1U /* Clears pending flag */ |
| #define SC_PAD_WAKEUP_LOW_LVL 4U /* Low level */ |
| #define SC_PAD_WAKEUP_FALL_EDGE 5U /* Falling edge */ |
| #define SC_PAD_WAKEUP_RISE_EDGE 6U /* Rising edge */ |
| #define SC_PAD_WAKEUP_HIGH_LVL 7U /* High-level */ |
| |
| #endif /* SC_PAD_API_H */ |
