blob: 56328463aecb705ed499046ac7dc5a8a5a41b7b6 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2018 Cisco Systems, Inc.
*
* Author: Thomas Fitzsimmons <fitzsim@fitzsim.org>
*/
#include <linux/types.h>
#include <common.h>
#include <asm/io.h>
#include <asm/bootm.h>
#include <mach/sdhci.h>
#include <mach/timer.h>
#include <mmc.h>
#include <fdtdec.h>
DECLARE_GLOBAL_DATA_PTR;
#define BCMSTB_DATA_SECTION __attribute__((section(".data")))
struct bcmstb_boot_parameters bcmstb_boot_parameters BCMSTB_DATA_SECTION;
phys_addr_t prior_stage_fdt_address BCMSTB_DATA_SECTION;
union reg_value_union {
const char *data;
const phys_addr_t *address;
};
int board_init(void)
{
return 0;
}
u32 get_board_rev(void)
{
return 0;
}
void reset_cpu(ulong ignored)
{
}
int print_cpuinfo(void)
{
return 0;
}
int dram_init(void)
{
if (fdtdec_setup_mem_size_base() != 0)
return -EINVAL;
return 0;
}
int dram_init_banksize(void)
{
fdtdec_setup_memory_banksize();
/*
* On this SoC, U-Boot is running as an ELF file. Change the
* relocation address to CONFIG_SYS_TEXT_BASE, so that in
* setup_reloc, gd->reloc_off works out to 0, effectively
* disabling relocation. Otherwise U-Boot hangs in the setup
* instructions just before relocate_code in
* arch/arm/lib/crt0.S.
*/
gd->relocaddr = CONFIG_SYS_TEXT_BASE;
return 0;
}
void enable_caches(void)
{
/*
* This port assumes that the prior stage bootloader has
* enabled I-cache and D-cache already. Implementing this
* function silences the warning in the default function.
*/
}
static const phys_addr_t bcmstb_sdhci_address(u32 alias_index)
{
int node = 0;
int ret = 0;
char sdhci[16] = { 0 };
const void *fdt = gd->fdt_blob;
const char *path = NULL;
struct fdt_resource resource = { 0 };
if (!fdt) {
printf("%s: Invalid gd->fdt_blob\n", __func__);
return 0;
}
node = fdt_path_offset(fdt, "/aliases");
if (node < 0) {
printf("%s: Failed to find /aliases node\n", __func__);
return 0;
}
sprintf(sdhci, "sdhci%d", alias_index);
path = fdt_getprop(fdt, node, sdhci, NULL);
if (!path) {
printf("%s: Failed to find alias for %s\n", __func__, sdhci);
return 0;
}
node = fdt_path_offset(fdt, path);
if (node < 0) {
printf("%s: Failed to resolve BCMSTB SDHCI alias\n", __func__);
return 0;
}
ret = fdt_get_named_resource(fdt, node, "reg", "reg-names",
"host", &resource);
if (ret) {
printf("%s: Failed to read BCMSTB SDHCI host resource\n",
__func__);
return 0;
}
return resource.start;
}
int board_mmc_init(bd_t *bis)
{
phys_addr_t sdhci_base_address = 0;
sdhci_base_address = bcmstb_sdhci_address(CONFIG_BCMSTB_SDHCI_INDEX);
if (!sdhci_base_address) {
sdhci_base_address = BCMSTB_SDHCI_BASE;
printf("%s: Assuming BCMSTB SDHCI address: 0x%p\n",
__func__, (void *)sdhci_base_address);
}
debug("BCMSTB SDHCI base address: 0x%p\n", (void *)sdhci_base_address);
bcmstb_sdhci_init(sdhci_base_address);
return 0;
}
int timer_init(void)
{
gd->arch.timer_rate_hz = readl(BCMSTB_TIMER_FREQUENCY);
return 0;
}
ulong get_tbclk(void)
{
return gd->arch.timer_rate_hz;
}
uint64_t get_ticks(void)
{
gd->timebase_h = readl(BCMSTB_TIMER_HIGH);
gd->timebase_l = readl(BCMSTB_TIMER_LOW);
return ((uint64_t)gd->timebase_h << 32) | gd->timebase_l;
}
int board_late_init(void)
{
debug("Arguments from prior stage bootloader:\n");
debug("General Purpose Register 0: 0x%x\n", bcmstb_boot_parameters.r0);
debug("General Purpose Register 1: 0x%x\n", bcmstb_boot_parameters.r1);
debug("General Purpose Register 2: 0x%x\n", bcmstb_boot_parameters.r2);
debug("General Purpose Register 3: 0x%x\n", bcmstb_boot_parameters.r3);
debug("Stack Pointer Register: 0x%x\n", bcmstb_boot_parameters.sp);
debug("Link Register: 0x%x\n", bcmstb_boot_parameters.lr);
debug("Assuming timer frequency register at: 0x%p\n",
(void *)BCMSTB_TIMER_FREQUENCY);
debug("Read timer frequency (in Hz): %ld\n", gd->arch.timer_rate_hz);
debug("Prior stage provided DTB at: 0x%p\n",
(void *)prior_stage_fdt_address);
/*
* Set fdtcontroladdr in the environment so that scripts can
* refer to it, for example, to reuse it for fdtaddr.
*/
env_set_hex("fdtcontroladdr", prior_stage_fdt_address);
/*
* Do not set machid to the machine identifier value provided
* by the prior stage bootloader (bcmstb_boot_parameters.r1)
* because we're using a device tree to boot Linux.
*/
return 0;
}