| Texas Instruments TI SCI Generic Power Domain |
| ============================================= |
| |
| Some TI SoCs contain a system controller (like the SYSFW, etc...) that is |
| responsible for controlling the state of the IPs that are present. |
| Communication between the host processor running an OS and the system |
| controller happens through a protocol known as TI SCI [1]. |
| |
| [1] http://processors.wiki.ti.com/index.php/TISCI |
| |
| PM Domain Node |
| ============== |
| The PM domain node represents the global PM domain managed by the SYSFW. Because |
| this relies on the TI SCI protocol to communicate with the SYSFW it must be a |
| child of the sysfw node. |
| |
| Required Properties: |
| -------------------- |
| - compatible: Must be "ti,sci-pm-domain" |
| - #power-domain-cells: Must be 1 so that an id can be provided in each |
| device node. |
| |
| Example (AM65x): |
| ---------------- |
| sysfw: sysfw { |
| compatible = "ti,am654-system-controller"; |
| ... |
| k3_pds: power-controller { |
| compatible = "ti,sci-pm-domain"; |
| #power-domain-cells = <1>; |
| }; |
| }; |
| |
| PM Domain Consumers |
| =================== |
| Hardware blocks belonging to a PM domain should contain a "power-domains" |
| property that is a phandle pointing to the corresponding PM domain node |
| along with an index representing the device id to be passed to the PMMC |
| for device control. |
| |
| Required Properties: |
| -------------------- |
| - power-domains: phandle pointing to the corresponding PM domain node |
| and an ID representing the device. |
| |
| Example (AM65x): |
| ---------------- |
| uart2: serial@02800000 { |
| compatible = "ti,omap4-uart"; |
| ... |
| power-domains = <&k3_pds 0x3f>; |
| }; |
