| /* | |
| * V4L2 Driver for i.MX27/i.MX25 camera host | |
| * | |
| * Copyright (C) 2008, Sascha Hauer, Pengutronix | |
| * Copyright (C) 2010, Baruch Siach, Orex Computed Radiography | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/io.h> | |
| #include <linux/delay.h> | |
| #include <linux/slab.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/errno.h> | |
| #include <linux/fs.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mm.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/time.h> | |
| #include <linux/version.h> | |
| #include <linux/device.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/mutex.h> | |
| #include <linux/clk.h> | |
| #include <media/v4l2-common.h> | |
| #include <media/v4l2-dev.h> | |
| #include <media/videobuf-core.h> | |
| #include <media/videobuf-dma-contig.h> | |
| #include <media/soc_camera.h> | |
| #include <media/soc_mediabus.h> | |
| #include <linux/videodev2.h> | |
| #include <mach/mx2_cam.h> | |
| #ifdef CONFIG_MACH_MX27 | |
| #include <mach/dma-mx1-mx2.h> | |
| #endif | |
| #include <mach/hardware.h> | |
| #include <asm/dma.h> | |
| #define MX2_CAM_DRV_NAME "mx2-camera" | |
| #define MX2_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5) | |
| #define MX2_CAM_DRIVER_DESCRIPTION "i.MX2x_Camera" | |
| /* reset values */ | |
| #define CSICR1_RESET_VAL 0x40000800 | |
| #define CSICR2_RESET_VAL 0x0 | |
| #define CSICR3_RESET_VAL 0x0 | |
| /* csi control reg 1 */ | |
| #define CSICR1_SWAP16_EN (1 << 31) | |
| #define CSICR1_EXT_VSYNC (1 << 30) | |
| #define CSICR1_EOF_INTEN (1 << 29) | |
| #define CSICR1_PRP_IF_EN (1 << 28) | |
| #define CSICR1_CCIR_MODE (1 << 27) | |
| #define CSICR1_COF_INTEN (1 << 26) | |
| #define CSICR1_SF_OR_INTEN (1 << 25) | |
| #define CSICR1_RF_OR_INTEN (1 << 24) | |
| #define CSICR1_STATFF_LEVEL (3 << 22) | |
| #define CSICR1_STATFF_INTEN (1 << 21) | |
| #define CSICR1_RXFF_LEVEL(l) (((l) & 3) << 19) /* MX27 */ | |
| #define CSICR1_FB2_DMA_INTEN (1 << 20) /* MX25 */ | |
| #define CSICR1_FB1_DMA_INTEN (1 << 19) /* MX25 */ | |
| #define CSICR1_RXFF_INTEN (1 << 18) | |
| #define CSICR1_SOF_POL (1 << 17) | |
| #define CSICR1_SOF_INTEN (1 << 16) | |
| #define CSICR1_MCLKDIV(d) (((d) & 0xF) << 12) | |
| #define CSICR1_HSYNC_POL (1 << 11) | |
| #define CSICR1_CCIR_EN (1 << 10) | |
| #define CSICR1_MCLKEN (1 << 9) | |
| #define CSICR1_FCC (1 << 8) | |
| #define CSICR1_PACK_DIR (1 << 7) | |
| #define CSICR1_CLR_STATFIFO (1 << 6) | |
| #define CSICR1_CLR_RXFIFO (1 << 5) | |
| #define CSICR1_GCLK_MODE (1 << 4) | |
| #define CSICR1_INV_DATA (1 << 3) | |
| #define CSICR1_INV_PCLK (1 << 2) | |
| #define CSICR1_REDGE (1 << 1) | |
| #define SHIFT_STATFF_LEVEL 22 | |
| #define SHIFT_RXFF_LEVEL 19 | |
| #define SHIFT_MCLKDIV 12 | |
| /* control reg 3 */ | |
| #define CSICR3_FRMCNT (0xFFFF << 16) | |
| #define CSICR3_FRMCNT_RST (1 << 15) | |
| #define CSICR3_DMA_REFLASH_RFF (1 << 14) | |
| #define CSICR3_DMA_REFLASH_SFF (1 << 13) | |
| #define CSICR3_DMA_REQ_EN_RFF (1 << 12) | |
| #define CSICR3_DMA_REQ_EN_SFF (1 << 11) | |
| #define CSICR3_RXFF_LEVEL(l) (((l) & 7) << 4) /* MX25 */ | |
| #define CSICR3_CSI_SUP (1 << 3) | |
| #define CSICR3_ZERO_PACK_EN (1 << 2) | |
| #define CSICR3_ECC_INT_EN (1 << 1) | |
| #define CSICR3_ECC_AUTO_EN (1 << 0) | |
| #define SHIFT_FRMCNT 16 | |
| /* csi status reg */ | |
| #define CSISR_SFF_OR_INT (1 << 25) | |
| #define CSISR_RFF_OR_INT (1 << 24) | |
| #define CSISR_STATFF_INT (1 << 21) | |
| #define CSISR_DMA_TSF_FB2_INT (1 << 20) /* MX25 */ | |
| #define CSISR_DMA_TSF_FB1_INT (1 << 19) /* MX25 */ | |
| #define CSISR_RXFF_INT (1 << 18) | |
| #define CSISR_EOF_INT (1 << 17) | |
| #define CSISR_SOF_INT (1 << 16) | |
| #define CSISR_F2_INT (1 << 15) | |
| #define CSISR_F1_INT (1 << 14) | |
| #define CSISR_COF_INT (1 << 13) | |
| #define CSISR_ECC_INT (1 << 1) | |
| #define CSISR_DRDY (1 << 0) | |
| #define CSICR1 0x00 | |
| #define CSICR2 0x04 | |
| #define CSISR (cpu_is_mx27() ? 0x08 : 0x18) | |
| #define CSISTATFIFO 0x0c | |
| #define CSIRFIFO 0x10 | |
| #define CSIRXCNT 0x14 | |
| #define CSICR3 (cpu_is_mx27() ? 0x1C : 0x08) | |
| #define CSIDMASA_STATFIFO 0x20 | |
| #define CSIDMATA_STATFIFO 0x24 | |
| #define CSIDMASA_FB1 0x28 | |
| #define CSIDMASA_FB2 0x2c | |
| #define CSIFBUF_PARA 0x30 | |
| #define CSIIMAG_PARA 0x34 | |
| /* EMMA PrP */ | |
| #define PRP_CNTL 0x00 | |
| #define PRP_INTR_CNTL 0x04 | |
| #define PRP_INTRSTATUS 0x08 | |
| #define PRP_SOURCE_Y_PTR 0x0c | |
| #define PRP_SOURCE_CB_PTR 0x10 | |
| #define PRP_SOURCE_CR_PTR 0x14 | |
| #define PRP_DEST_RGB1_PTR 0x18 | |
| #define PRP_DEST_RGB2_PTR 0x1c | |
| #define PRP_DEST_Y_PTR 0x20 | |
| #define PRP_DEST_CB_PTR 0x24 | |
| #define PRP_DEST_CR_PTR 0x28 | |
| #define PRP_SRC_FRAME_SIZE 0x2c | |
| #define PRP_DEST_CH1_LINE_STRIDE 0x30 | |
| #define PRP_SRC_PIXEL_FORMAT_CNTL 0x34 | |
| #define PRP_CH1_PIXEL_FORMAT_CNTL 0x38 | |
| #define PRP_CH1_OUT_IMAGE_SIZE 0x3c | |
| #define PRP_CH2_OUT_IMAGE_SIZE 0x40 | |
| #define PRP_SRC_LINE_STRIDE 0x44 | |
| #define PRP_CSC_COEF_012 0x48 | |
| #define PRP_CSC_COEF_345 0x4c | |
| #define PRP_CSC_COEF_678 0x50 | |
| #define PRP_CH1_RZ_HORI_COEF1 0x54 | |
| #define PRP_CH1_RZ_HORI_COEF2 0x58 | |
| #define PRP_CH1_RZ_HORI_VALID 0x5c | |
| #define PRP_CH1_RZ_VERT_COEF1 0x60 | |
| #define PRP_CH1_RZ_VERT_COEF2 0x64 | |
| #define PRP_CH1_RZ_VERT_VALID 0x68 | |
| #define PRP_CH2_RZ_HORI_COEF1 0x6c | |
| #define PRP_CH2_RZ_HORI_COEF2 0x70 | |
| #define PRP_CH2_RZ_HORI_VALID 0x74 | |
| #define PRP_CH2_RZ_VERT_COEF1 0x78 | |
| #define PRP_CH2_RZ_VERT_COEF2 0x7c | |
| #define PRP_CH2_RZ_VERT_VALID 0x80 | |
| #define PRP_CNTL_CH1EN (1 << 0) | |
| #define PRP_CNTL_CH2EN (1 << 1) | |
| #define PRP_CNTL_CSIEN (1 << 2) | |
| #define PRP_CNTL_DATA_IN_YUV420 (0 << 3) | |
| #define PRP_CNTL_DATA_IN_YUV422 (1 << 3) | |
| #define PRP_CNTL_DATA_IN_RGB16 (2 << 3) | |
| #define PRP_CNTL_DATA_IN_RGB32 (3 << 3) | |
| #define PRP_CNTL_CH1_OUT_RGB8 (0 << 5) | |
| #define PRP_CNTL_CH1_OUT_RGB16 (1 << 5) | |
| #define PRP_CNTL_CH1_OUT_RGB32 (2 << 5) | |
| #define PRP_CNTL_CH1_OUT_YUV422 (3 << 5) | |
| #define PRP_CNTL_CH2_OUT_YUV420 (0 << 7) | |
| #define PRP_CNTL_CH2_OUT_YUV422 (1 << 7) | |
| #define PRP_CNTL_CH2_OUT_YUV444 (2 << 7) | |
| #define PRP_CNTL_CH1_LEN (1 << 9) | |
| #define PRP_CNTL_CH2_LEN (1 << 10) | |
| #define PRP_CNTL_SKIP_FRAME (1 << 11) | |
| #define PRP_CNTL_SWRST (1 << 12) | |
| #define PRP_CNTL_CLKEN (1 << 13) | |
| #define PRP_CNTL_WEN (1 << 14) | |
| #define PRP_CNTL_CH1BYP (1 << 15) | |
| #define PRP_CNTL_IN_TSKIP(x) ((x) << 16) | |
| #define PRP_CNTL_CH1_TSKIP(x) ((x) << 19) | |
| #define PRP_CNTL_CH2_TSKIP(x) ((x) << 22) | |
| #define PRP_CNTL_INPUT_FIFO_LEVEL(x) ((x) << 25) | |
| #define PRP_CNTL_RZ_FIFO_LEVEL(x) ((x) << 27) | |
| #define PRP_CNTL_CH2B1EN (1 << 29) | |
| #define PRP_CNTL_CH2B2EN (1 << 30) | |
| #define PRP_CNTL_CH2FEN (1 << 31) | |
| /* IRQ Enable and status register */ | |
| #define PRP_INTR_RDERR (1 << 0) | |
| #define PRP_INTR_CH1WERR (1 << 1) | |
| #define PRP_INTR_CH2WERR (1 << 2) | |
| #define PRP_INTR_CH1FC (1 << 3) | |
| #define PRP_INTR_CH2FC (1 << 5) | |
| #define PRP_INTR_LBOVF (1 << 7) | |
| #define PRP_INTR_CH2OVF (1 << 8) | |
| #define mx27_camera_emma(pcdev) (cpu_is_mx27() && pcdev->use_emma) | |
| #define MAX_VIDEO_MEM 16 | |
| struct mx2_camera_dev { | |
| struct device *dev; | |
| struct soc_camera_host soc_host; | |
| struct soc_camera_device *icd; | |
| struct clk *clk_csi, *clk_emma; | |
| unsigned int irq_csi, irq_emma; | |
| void __iomem *base_csi, *base_emma; | |
| unsigned long base_dma; | |
| struct mx2_camera_platform_data *pdata; | |
| struct resource *res_csi, *res_emma; | |
| unsigned long platform_flags; | |
| struct list_head capture; | |
| struct list_head active_bufs; | |
| spinlock_t lock; | |
| int dma; | |
| struct mx2_buffer *active; | |
| struct mx2_buffer *fb1_active; | |
| struct mx2_buffer *fb2_active; | |
| int use_emma; | |
| u32 csicr1; | |
| void *discard_buffer; | |
| dma_addr_t discard_buffer_dma; | |
| size_t discard_size; | |
| }; | |
| /* buffer for one video frame */ | |
| struct mx2_buffer { | |
| /* common v4l buffer stuff -- must be first */ | |
| struct videobuf_buffer vb; | |
| enum v4l2_mbus_pixelcode code; | |
| int bufnum; | |
| }; | |
| static void mx2_camera_deactivate(struct mx2_camera_dev *pcdev) | |
| { | |
| unsigned long flags; | |
| clk_disable(pcdev->clk_csi); | |
| writel(0, pcdev->base_csi + CSICR1); | |
| if (mx27_camera_emma(pcdev)) { | |
| writel(0, pcdev->base_emma + PRP_CNTL); | |
| } else if (cpu_is_mx25()) { | |
| spin_lock_irqsave(&pcdev->lock, flags); | |
| pcdev->fb1_active = NULL; | |
| pcdev->fb2_active = NULL; | |
| writel(0, pcdev->base_csi + CSIDMASA_FB1); | |
| writel(0, pcdev->base_csi + CSIDMASA_FB2); | |
| spin_unlock_irqrestore(&pcdev->lock, flags); | |
| } | |
| } | |
| /* | |
| * The following two functions absolutely depend on the fact, that | |
| * there can be only one camera on mx2 camera sensor interface | |
| */ | |
| static int mx2_camera_add_device(struct soc_camera_device *icd) | |
| { | |
| struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); | |
| struct mx2_camera_dev *pcdev = ici->priv; | |
| int ret; | |
| u32 csicr1; | |
| if (pcdev->icd) | |
| return -EBUSY; | |
| ret = clk_enable(pcdev->clk_csi); | |
| if (ret < 0) | |
| return ret; | |
| csicr1 = CSICR1_MCLKEN; | |
| if (mx27_camera_emma(pcdev)) { | |
| csicr1 |= CSICR1_PRP_IF_EN | CSICR1_FCC | | |
| CSICR1_RXFF_LEVEL(0); | |
| } else if (cpu_is_mx27()) | |
| csicr1 |= CSICR1_SOF_INTEN | CSICR1_RXFF_LEVEL(2); | |
| pcdev->csicr1 = csicr1; | |
| writel(pcdev->csicr1, pcdev->base_csi + CSICR1); | |
| pcdev->icd = icd; | |
| dev_info(icd->dev.parent, "Camera driver attached to camera %d\n", | |
| icd->devnum); | |
| return 0; | |
| } | |
| static void mx2_camera_remove_device(struct soc_camera_device *icd) | |
| { | |
| struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); | |
| struct mx2_camera_dev *pcdev = ici->priv; | |
| BUG_ON(icd != pcdev->icd); | |
| dev_info(icd->dev.parent, "Camera driver detached from camera %d\n", | |
| icd->devnum); | |
| mx2_camera_deactivate(pcdev); | |
| if (pcdev->discard_buffer) { | |
| dma_free_coherent(ici->v4l2_dev.dev, pcdev->discard_size, | |
| pcdev->discard_buffer, | |
| pcdev->discard_buffer_dma); | |
| pcdev->discard_buffer = NULL; | |
| } | |
| pcdev->icd = NULL; | |
| } | |
| #ifdef CONFIG_MACH_MX27 | |
| static void mx27_camera_dma_enable(struct mx2_camera_dev *pcdev) | |
| { | |
| u32 tmp; | |
| imx_dma_enable(pcdev->dma); | |
| tmp = readl(pcdev->base_csi + CSICR1); | |
| tmp |= CSICR1_RF_OR_INTEN; | |
| writel(tmp, pcdev->base_csi + CSICR1); | |
| } | |
| static irqreturn_t mx27_camera_irq(int irq_csi, void *data) | |
| { | |
| struct mx2_camera_dev *pcdev = data; | |
| u32 status = readl(pcdev->base_csi + CSISR); | |
| if (status & CSISR_SOF_INT && pcdev->active) { | |
| u32 tmp; | |
| tmp = readl(pcdev->base_csi + CSICR1); | |
| writel(tmp | CSICR1_CLR_RXFIFO, pcdev->base_csi + CSICR1); | |
| mx27_camera_dma_enable(pcdev); | |
| } | |
| writel(CSISR_SOF_INT | CSISR_RFF_OR_INT, pcdev->base_csi + CSISR); | |
| return IRQ_HANDLED; | |
| } | |
| #else | |
| static irqreturn_t mx27_camera_irq(int irq_csi, void *data) | |
| { | |
| return IRQ_NONE; | |
| } | |
| #endif /* CONFIG_MACH_MX27 */ | |
| static void mx25_camera_frame_done(struct mx2_camera_dev *pcdev, int fb, | |
| int state) | |
| { | |
| struct videobuf_buffer *vb; | |
| struct mx2_buffer *buf; | |
| struct mx2_buffer **fb_active = fb == 1 ? &pcdev->fb1_active : | |
| &pcdev->fb2_active; | |
| u32 fb_reg = fb == 1 ? CSIDMASA_FB1 : CSIDMASA_FB2; | |
| unsigned long flags; | |
| spin_lock_irqsave(&pcdev->lock, flags); | |
| if (*fb_active == NULL) | |
| goto out; | |
| vb = &(*fb_active)->vb; | |
| dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, | |
| vb, vb->baddr, vb->bsize); | |
| vb->state = state; | |
| do_gettimeofday(&vb->ts); | |
| vb->field_count++; | |
| wake_up(&vb->done); | |
| if (list_empty(&pcdev->capture)) { | |
| buf = NULL; | |
| writel(0, pcdev->base_csi + fb_reg); | |
| } else { | |
| buf = list_entry(pcdev->capture.next, struct mx2_buffer, | |
| vb.queue); | |
| vb = &buf->vb; | |
| list_del(&vb->queue); | |
| vb->state = VIDEOBUF_ACTIVE; | |
| writel(videobuf_to_dma_contig(vb), pcdev->base_csi + fb_reg); | |
| } | |
| *fb_active = buf; | |
| out: | |
| spin_unlock_irqrestore(&pcdev->lock, flags); | |
| } | |
| static irqreturn_t mx25_camera_irq(int irq_csi, void *data) | |
| { | |
| struct mx2_camera_dev *pcdev = data; | |
| u32 status = readl(pcdev->base_csi + CSISR); | |
| if (status & CSISR_DMA_TSF_FB1_INT) | |
| mx25_camera_frame_done(pcdev, 1, VIDEOBUF_DONE); | |
| else if (status & CSISR_DMA_TSF_FB2_INT) | |
| mx25_camera_frame_done(pcdev, 2, VIDEOBUF_DONE); | |
| /* FIXME: handle CSISR_RFF_OR_INT */ | |
| writel(status, pcdev->base_csi + CSISR); | |
| return IRQ_HANDLED; | |
| } | |
| /* | |
| * Videobuf operations | |
| */ | |
| static int mx2_videobuf_setup(struct videobuf_queue *vq, unsigned int *count, | |
| unsigned int *size) | |
| { | |
| struct soc_camera_device *icd = vq->priv_data; | |
| int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, | |
| icd->current_fmt->host_fmt); | |
| dev_dbg(&icd->dev, "count=%d, size=%d\n", *count, *size); | |
| if (bytes_per_line < 0) | |
| return bytes_per_line; | |
| *size = bytes_per_line * icd->user_height; | |
| if (0 == *count) | |
| *count = 32; | |
| if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024) | |
| *count = (MAX_VIDEO_MEM * 1024 * 1024) / *size; | |
| return 0; | |
| } | |
| static void free_buffer(struct videobuf_queue *vq, struct mx2_buffer *buf) | |
| { | |
| struct soc_camera_device *icd = vq->priv_data; | |
| struct videobuf_buffer *vb = &buf->vb; | |
| dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, | |
| vb, vb->baddr, vb->bsize); | |
| /* | |
| * This waits until this buffer is out of danger, i.e., until it is no | |
| * longer in state VIDEOBUF_QUEUED or VIDEOBUF_ACTIVE | |
| */ | |
| videobuf_waiton(vq, vb, 0, 0); | |
| videobuf_dma_contig_free(vq, vb); | |
| dev_dbg(&icd->dev, "%s freed\n", __func__); | |
| vb->state = VIDEOBUF_NEEDS_INIT; | |
| } | |
| static int mx2_videobuf_prepare(struct videobuf_queue *vq, | |
| struct videobuf_buffer *vb, enum v4l2_field field) | |
| { | |
| struct soc_camera_device *icd = vq->priv_data; | |
| struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb); | |
| int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, | |
| icd->current_fmt->host_fmt); | |
| int ret = 0; | |
| dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, | |
| vb, vb->baddr, vb->bsize); | |
| if (bytes_per_line < 0) | |
| return bytes_per_line; | |
| #ifdef DEBUG | |
| /* | |
| * This can be useful if you want to see if we actually fill | |
| * the buffer with something | |
| */ | |
| memset((void *)vb->baddr, 0xaa, vb->bsize); | |
| #endif | |
| if (buf->code != icd->current_fmt->code || | |
| vb->width != icd->user_width || | |
| vb->height != icd->user_height || | |
| vb->field != field) { | |
| buf->code = icd->current_fmt->code; | |
| vb->width = icd->user_width; | |
| vb->height = icd->user_height; | |
| vb->field = field; | |
| vb->state = VIDEOBUF_NEEDS_INIT; | |
| } | |
| vb->size = bytes_per_line * vb->height; | |
| if (vb->baddr && vb->bsize < vb->size) { | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| if (vb->state == VIDEOBUF_NEEDS_INIT) { | |
| ret = videobuf_iolock(vq, vb, NULL); | |
| if (ret) | |
| goto fail; | |
| vb->state = VIDEOBUF_PREPARED; | |
| } | |
| return 0; | |
| fail: | |
| free_buffer(vq, buf); | |
| out: | |
| return ret; | |
| } | |
| static void mx2_videobuf_queue(struct videobuf_queue *vq, | |
| struct videobuf_buffer *vb) | |
| { | |
| struct soc_camera_device *icd = vq->priv_data; | |
| struct soc_camera_host *ici = | |
| to_soc_camera_host(icd->dev.parent); | |
| struct mx2_camera_dev *pcdev = ici->priv; | |
| struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb); | |
| unsigned long flags; | |
| dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, | |
| vb, vb->baddr, vb->bsize); | |
| spin_lock_irqsave(&pcdev->lock, flags); | |
| vb->state = VIDEOBUF_QUEUED; | |
| list_add_tail(&vb->queue, &pcdev->capture); | |
| if (mx27_camera_emma(pcdev)) { | |
| goto out; | |
| #ifdef CONFIG_MACH_MX27 | |
| } else if (cpu_is_mx27()) { | |
| int ret; | |
| if (pcdev->active == NULL) { | |
| ret = imx_dma_setup_single(pcdev->dma, | |
| videobuf_to_dma_contig(vb), vb->size, | |
| (u32)pcdev->base_dma + 0x10, | |
| DMA_MODE_READ); | |
| if (ret) { | |
| vb->state = VIDEOBUF_ERROR; | |
| wake_up(&vb->done); | |
| goto out; | |
| } | |
| vb->state = VIDEOBUF_ACTIVE; | |
| pcdev->active = buf; | |
| } | |
| #endif | |
| } else { /* cpu_is_mx25() */ | |
| u32 csicr3, dma_inten = 0; | |
| if (pcdev->fb1_active == NULL) { | |
| writel(videobuf_to_dma_contig(vb), | |
| pcdev->base_csi + CSIDMASA_FB1); | |
| pcdev->fb1_active = buf; | |
| dma_inten = CSICR1_FB1_DMA_INTEN; | |
| } else if (pcdev->fb2_active == NULL) { | |
| writel(videobuf_to_dma_contig(vb), | |
| pcdev->base_csi + CSIDMASA_FB2); | |
| pcdev->fb2_active = buf; | |
| dma_inten = CSICR1_FB2_DMA_INTEN; | |
| } | |
| if (dma_inten) { | |
| list_del(&vb->queue); | |
| vb->state = VIDEOBUF_ACTIVE; | |
| csicr3 = readl(pcdev->base_csi + CSICR3); | |
| /* Reflash DMA */ | |
| writel(csicr3 | CSICR3_DMA_REFLASH_RFF, | |
| pcdev->base_csi + CSICR3); | |
| /* clear & enable interrupts */ | |
| writel(dma_inten, pcdev->base_csi + CSISR); | |
| pcdev->csicr1 |= dma_inten; | |
| writel(pcdev->csicr1, pcdev->base_csi + CSICR1); | |
| /* enable DMA */ | |
| csicr3 |= CSICR3_DMA_REQ_EN_RFF | CSICR3_RXFF_LEVEL(1); | |
| writel(csicr3, pcdev->base_csi + CSICR3); | |
| } | |
| } | |
| out: | |
| spin_unlock_irqrestore(&pcdev->lock, flags); | |
| } | |
| static void mx2_videobuf_release(struct videobuf_queue *vq, | |
| struct videobuf_buffer *vb) | |
| { | |
| struct soc_camera_device *icd = vq->priv_data; | |
| struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); | |
| struct mx2_camera_dev *pcdev = ici->priv; | |
| struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb); | |
| unsigned long flags; | |
| #ifdef DEBUG | |
| dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, | |
| vb, vb->baddr, vb->bsize); | |
| switch (vb->state) { | |
| case VIDEOBUF_ACTIVE: | |
| dev_info(&icd->dev, "%s (active)\n", __func__); | |
| break; | |
| case VIDEOBUF_QUEUED: | |
| dev_info(&icd->dev, "%s (queued)\n", __func__); | |
| break; | |
| case VIDEOBUF_PREPARED: | |
| dev_info(&icd->dev, "%s (prepared)\n", __func__); | |
| break; | |
| default: | |
| dev_info(&icd->dev, "%s (unknown) %d\n", __func__, | |
| vb->state); | |
| break; | |
| } | |
| #endif | |
| /* | |
| * Terminate only queued but inactive buffers. Active buffers are | |
| * released when they become inactive after videobuf_waiton(). | |
| * | |
| * FIXME: implement forced termination of active buffers for mx27 and | |
| * mx27 eMMA, so that the user won't get stuck in an uninterruptible | |
| * state. This requires a specific handling for each of the these DMA | |
| * types. | |
| */ | |
| spin_lock_irqsave(&pcdev->lock, flags); | |
| if (vb->state == VIDEOBUF_QUEUED) { | |
| list_del(&vb->queue); | |
| vb->state = VIDEOBUF_ERROR; | |
| } else if (cpu_is_mx25() && vb->state == VIDEOBUF_ACTIVE) { | |
| if (pcdev->fb1_active == buf) { | |
| pcdev->csicr1 &= ~CSICR1_FB1_DMA_INTEN; | |
| writel(0, pcdev->base_csi + CSIDMASA_FB1); | |
| pcdev->fb1_active = NULL; | |
| } else if (pcdev->fb2_active == buf) { | |
| pcdev->csicr1 &= ~CSICR1_FB2_DMA_INTEN; | |
| writel(0, pcdev->base_csi + CSIDMASA_FB2); | |
| pcdev->fb2_active = NULL; | |
| } | |
| writel(pcdev->csicr1, pcdev->base_csi + CSICR1); | |
| vb->state = VIDEOBUF_ERROR; | |
| } | |
| spin_unlock_irqrestore(&pcdev->lock, flags); | |
| free_buffer(vq, buf); | |
| } | |
| static struct videobuf_queue_ops mx2_videobuf_ops = { | |
| .buf_setup = mx2_videobuf_setup, | |
| .buf_prepare = mx2_videobuf_prepare, | |
| .buf_queue = mx2_videobuf_queue, | |
| .buf_release = mx2_videobuf_release, | |
| }; | |
| static void mx2_camera_init_videobuf(struct videobuf_queue *q, | |
| struct soc_camera_device *icd) | |
| { | |
| struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); | |
| struct mx2_camera_dev *pcdev = ici->priv; | |
| videobuf_queue_dma_contig_init(q, &mx2_videobuf_ops, pcdev->dev, | |
| &pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE, | |
| V4L2_FIELD_NONE, sizeof(struct mx2_buffer), | |
| icd, &icd->video_lock); | |
| } | |
| #define MX2_BUS_FLAGS (SOCAM_DATAWIDTH_8 | \ | |
| SOCAM_MASTER | \ | |
| SOCAM_VSYNC_ACTIVE_HIGH | \ | |
| SOCAM_VSYNC_ACTIVE_LOW | \ | |
| SOCAM_HSYNC_ACTIVE_HIGH | \ | |
| SOCAM_HSYNC_ACTIVE_LOW | \ | |
| SOCAM_PCLK_SAMPLE_RISING | \ | |
| SOCAM_PCLK_SAMPLE_FALLING | \ | |
| SOCAM_DATA_ACTIVE_HIGH | \ | |
| SOCAM_DATA_ACTIVE_LOW) | |
| static int mx27_camera_emma_prp_reset(struct mx2_camera_dev *pcdev) | |
| { | |
| u32 cntl; | |
| int count = 0; | |
| cntl = readl(pcdev->base_emma + PRP_CNTL); | |
| writel(PRP_CNTL_SWRST, pcdev->base_emma + PRP_CNTL); | |
| while (count++ < 100) { | |
| if (!(readl(pcdev->base_emma + PRP_CNTL) & PRP_CNTL_SWRST)) | |
| return 0; | |
| barrier(); | |
| udelay(1); | |
| } | |
| return -ETIMEDOUT; | |
| } | |
| static void mx27_camera_emma_buf_init(struct soc_camera_device *icd, | |
| int bytesperline) | |
| { | |
| struct soc_camera_host *ici = | |
| to_soc_camera_host(icd->dev.parent); | |
| struct mx2_camera_dev *pcdev = ici->priv; | |
| writel(pcdev->discard_buffer_dma, | |
| pcdev->base_emma + PRP_DEST_RGB1_PTR); | |
| writel(pcdev->discard_buffer_dma, | |
| pcdev->base_emma + PRP_DEST_RGB2_PTR); | |
| /* | |
| * We only use the EMMA engine to get rid of the broken | |
| * DMA Engine. No color space consversion at the moment. | |
| * We set the incomming and outgoing pixelformat to an | |
| * 16 Bit wide format and adjust the bytesperline | |
| * accordingly. With this configuration the inputdata | |
| * will not be changed by the emma and could be any type | |
| * of 16 Bit Pixelformat. | |
| */ | |
| writel(PRP_CNTL_CH1EN | | |
| PRP_CNTL_CSIEN | | |
| PRP_CNTL_DATA_IN_RGB16 | | |
| PRP_CNTL_CH1_OUT_RGB16 | | |
| PRP_CNTL_CH1_LEN | | |
| PRP_CNTL_CH1BYP | | |
| PRP_CNTL_CH1_TSKIP(0) | | |
| PRP_CNTL_IN_TSKIP(0), | |
| pcdev->base_emma + PRP_CNTL); | |
| writel(((bytesperline >> 1) << 16) | icd->user_height, | |
| pcdev->base_emma + PRP_SRC_FRAME_SIZE); | |
| writel(((bytesperline >> 1) << 16) | icd->user_height, | |
| pcdev->base_emma + PRP_CH1_OUT_IMAGE_SIZE); | |
| writel(bytesperline, | |
| pcdev->base_emma + PRP_DEST_CH1_LINE_STRIDE); | |
| writel(0x2ca00565, /* RGB565 */ | |
| pcdev->base_emma + PRP_SRC_PIXEL_FORMAT_CNTL); | |
| writel(0x2ca00565, /* RGB565 */ | |
| pcdev->base_emma + PRP_CH1_PIXEL_FORMAT_CNTL); | |
| /* Enable interrupts */ | |
| writel(PRP_INTR_RDERR | | |
| PRP_INTR_CH1WERR | | |
| PRP_INTR_CH2WERR | | |
| PRP_INTR_CH1FC | | |
| PRP_INTR_CH2FC | | |
| PRP_INTR_LBOVF | | |
| PRP_INTR_CH2OVF, | |
| pcdev->base_emma + PRP_INTR_CNTL); | |
| } | |
| static int mx2_camera_set_bus_param(struct soc_camera_device *icd, | |
| __u32 pixfmt) | |
| { | |
| struct soc_camera_host *ici = | |
| to_soc_camera_host(icd->dev.parent); | |
| struct mx2_camera_dev *pcdev = ici->priv; | |
| unsigned long camera_flags, common_flags; | |
| int ret = 0; | |
| int bytesperline; | |
| u32 csicr1 = pcdev->csicr1; | |
| camera_flags = icd->ops->query_bus_param(icd); | |
| common_flags = soc_camera_bus_param_compatible(camera_flags, | |
| MX2_BUS_FLAGS); | |
| if (!common_flags) | |
| return -EINVAL; | |
| if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) && | |
| (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) { | |
| if (pcdev->platform_flags & MX2_CAMERA_HSYNC_HIGH) | |
| common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW; | |
| else | |
| common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH; | |
| } | |
| if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) && | |
| (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) { | |
| if (pcdev->platform_flags & MX2_CAMERA_PCLK_SAMPLE_RISING) | |
| common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING; | |
| else | |
| common_flags &= ~SOCAM_PCLK_SAMPLE_RISING; | |
| } | |
| ret = icd->ops->set_bus_param(icd, common_flags); | |
| if (ret < 0) | |
| return ret; | |
| if (common_flags & SOCAM_PCLK_SAMPLE_RISING) | |
| csicr1 |= CSICR1_REDGE; | |
| if (common_flags & SOCAM_VSYNC_ACTIVE_HIGH) | |
| csicr1 |= CSICR1_SOF_POL; | |
| if (common_flags & SOCAM_HSYNC_ACTIVE_HIGH) | |
| csicr1 |= CSICR1_HSYNC_POL; | |
| if (pcdev->platform_flags & MX2_CAMERA_SWAP16) | |
| csicr1 |= CSICR1_SWAP16_EN; | |
| if (pcdev->platform_flags & MX2_CAMERA_EXT_VSYNC) | |
| csicr1 |= CSICR1_EXT_VSYNC; | |
| if (pcdev->platform_flags & MX2_CAMERA_CCIR) | |
| csicr1 |= CSICR1_CCIR_EN; | |
| if (pcdev->platform_flags & MX2_CAMERA_CCIR_INTERLACE) | |
| csicr1 |= CSICR1_CCIR_MODE; | |
| if (pcdev->platform_flags & MX2_CAMERA_GATED_CLOCK) | |
| csicr1 |= CSICR1_GCLK_MODE; | |
| if (pcdev->platform_flags & MX2_CAMERA_INV_DATA) | |
| csicr1 |= CSICR1_INV_DATA; | |
| if (pcdev->platform_flags & MX2_CAMERA_PACK_DIR_MSB) | |
| csicr1 |= CSICR1_PACK_DIR; | |
| pcdev->csicr1 = csicr1; | |
| bytesperline = soc_mbus_bytes_per_line(icd->user_width, | |
| icd->current_fmt->host_fmt); | |
| if (bytesperline < 0) | |
| return bytesperline; | |
| if (mx27_camera_emma(pcdev)) { | |
| ret = mx27_camera_emma_prp_reset(pcdev); | |
| if (ret) | |
| return ret; | |
| if (pcdev->discard_buffer) | |
| dma_free_coherent(ici->v4l2_dev.dev, | |
| pcdev->discard_size, pcdev->discard_buffer, | |
| pcdev->discard_buffer_dma); | |
| /* | |
| * I didn't manage to properly enable/disable the prp | |
| * on a per frame basis during running transfers, | |
| * thus we allocate a buffer here and use it to | |
| * discard frames when no buffer is available. | |
| * Feel free to work on this ;) | |
| */ | |
| pcdev->discard_size = icd->user_height * bytesperline; | |
| pcdev->discard_buffer = dma_alloc_coherent(ici->v4l2_dev.dev, | |
| pcdev->discard_size, &pcdev->discard_buffer_dma, | |
| GFP_KERNEL); | |
| if (!pcdev->discard_buffer) | |
| return -ENOMEM; | |
| mx27_camera_emma_buf_init(icd, bytesperline); | |
| } else if (cpu_is_mx25()) { | |
| writel((bytesperline * icd->user_height) >> 2, | |
| pcdev->base_csi + CSIRXCNT); | |
| writel((bytesperline << 16) | icd->user_height, | |
| pcdev->base_csi + CSIIMAG_PARA); | |
| } | |
| writel(pcdev->csicr1, pcdev->base_csi + CSICR1); | |
| return 0; | |
| } | |
| static int mx2_camera_set_crop(struct soc_camera_device *icd, | |
| struct v4l2_crop *a) | |
| { | |
| struct v4l2_rect *rect = &a->c; | |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); | |
| struct v4l2_mbus_framefmt mf; | |
| int ret; | |
| soc_camera_limit_side(&rect->left, &rect->width, 0, 2, 4096); | |
| soc_camera_limit_side(&rect->top, &rect->height, 0, 2, 4096); | |
| ret = v4l2_subdev_call(sd, video, s_crop, a); | |
| if (ret < 0) | |
| return ret; | |
| /* The capture device might have changed its output */ | |
| ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf); | |
| if (ret < 0) | |
| return ret; | |
| dev_dbg(icd->dev.parent, "Sensor cropped %dx%d\n", | |
| mf.width, mf.height); | |
| icd->user_width = mf.width; | |
| icd->user_height = mf.height; | |
| return ret; | |
| } | |
| static int mx2_camera_set_fmt(struct soc_camera_device *icd, | |
| struct v4l2_format *f) | |
| { | |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); | |
| const struct soc_camera_format_xlate *xlate; | |
| struct v4l2_pix_format *pix = &f->fmt.pix; | |
| struct v4l2_mbus_framefmt mf; | |
| int ret; | |
| xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat); | |
| if (!xlate) { | |
| dev_warn(icd->dev.parent, "Format %x not found\n", | |
| pix->pixelformat); | |
| return -EINVAL; | |
| } | |
| mf.width = pix->width; | |
| mf.height = pix->height; | |
| mf.field = pix->field; | |
| mf.colorspace = pix->colorspace; | |
| mf.code = xlate->code; | |
| ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf); | |
| if (ret < 0 && ret != -ENOIOCTLCMD) | |
| return ret; | |
| if (mf.code != xlate->code) | |
| return -EINVAL; | |
| pix->width = mf.width; | |
| pix->height = mf.height; | |
| pix->field = mf.field; | |
| pix->colorspace = mf.colorspace; | |
| icd->current_fmt = xlate; | |
| return 0; | |
| } | |
| static int mx2_camera_try_fmt(struct soc_camera_device *icd, | |
| struct v4l2_format *f) | |
| { | |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); | |
| const struct soc_camera_format_xlate *xlate; | |
| struct v4l2_pix_format *pix = &f->fmt.pix; | |
| struct v4l2_mbus_framefmt mf; | |
| __u32 pixfmt = pix->pixelformat; | |
| unsigned int width_limit; | |
| int ret; | |
| xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); | |
| if (pixfmt && !xlate) { | |
| dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt); | |
| return -EINVAL; | |
| } | |
| /* FIXME: implement MX27 limits */ | |
| /* limit to MX25 hardware capabilities */ | |
| if (cpu_is_mx25()) { | |
| if (xlate->host_fmt->bits_per_sample <= 8) | |
| width_limit = 0xffff * 4; | |
| else | |
| width_limit = 0xffff * 2; | |
| /* CSIIMAG_PARA limit */ | |
| if (pix->width > width_limit) | |
| pix->width = width_limit; | |
| if (pix->height > 0xffff) | |
| pix->height = 0xffff; | |
| pix->bytesperline = soc_mbus_bytes_per_line(pix->width, | |
| xlate->host_fmt); | |
| if (pix->bytesperline < 0) | |
| return pix->bytesperline; | |
| pix->sizeimage = pix->height * pix->bytesperline; | |
| if (pix->sizeimage > (4 * 0x3ffff)) { /* CSIRXCNT limit */ | |
| dev_warn(icd->dev.parent, | |
| "Image size (%u) above limit\n", | |
| pix->sizeimage); | |
| return -EINVAL; | |
| } | |
| } | |
| /* limit to sensor capabilities */ | |
| mf.width = pix->width; | |
| mf.height = pix->height; | |
| mf.field = pix->field; | |
| mf.colorspace = pix->colorspace; | |
| mf.code = xlate->code; | |
| ret = v4l2_subdev_call(sd, video, try_mbus_fmt, &mf); | |
| if (ret < 0) | |
| return ret; | |
| if (mf.field == V4L2_FIELD_ANY) | |
| mf.field = V4L2_FIELD_NONE; | |
| if (mf.field != V4L2_FIELD_NONE) { | |
| dev_err(icd->dev.parent, "Field type %d unsupported.\n", | |
| mf.field); | |
| return -EINVAL; | |
| } | |
| pix->width = mf.width; | |
| pix->height = mf.height; | |
| pix->field = mf.field; | |
| pix->colorspace = mf.colorspace; | |
| return 0; | |
| } | |
| static int mx2_camera_querycap(struct soc_camera_host *ici, | |
| struct v4l2_capability *cap) | |
| { | |
| /* cap->name is set by the friendly caller:-> */ | |
| strlcpy(cap->card, MX2_CAM_DRIVER_DESCRIPTION, sizeof(cap->card)); | |
| cap->version = MX2_CAM_VERSION_CODE; | |
| cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; | |
| return 0; | |
| } | |
| static int mx2_camera_reqbufs(struct soc_camera_device *icd, | |
| struct v4l2_requestbuffers *p) | |
| { | |
| int i; | |
| for (i = 0; i < p->count; i++) { | |
| struct mx2_buffer *buf = container_of(icd->vb_vidq.bufs[i], | |
| struct mx2_buffer, vb); | |
| INIT_LIST_HEAD(&buf->vb.queue); | |
| } | |
| return 0; | |
| } | |
| #ifdef CONFIG_MACH_MX27 | |
| static void mx27_camera_frame_done(struct mx2_camera_dev *pcdev, int state) | |
| { | |
| struct videobuf_buffer *vb; | |
| struct mx2_buffer *buf; | |
| unsigned long flags; | |
| int ret; | |
| spin_lock_irqsave(&pcdev->lock, flags); | |
| if (!pcdev->active) { | |
| dev_err(pcdev->dev, "%s called with no active buffer!\n", | |
| __func__); | |
| goto out; | |
| } | |
| vb = &pcdev->active->vb; | |
| buf = container_of(vb, struct mx2_buffer, vb); | |
| WARN_ON(list_empty(&vb->queue)); | |
| dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, | |
| vb, vb->baddr, vb->bsize); | |
| /* _init is used to debug races, see comment in pxa_camera_reqbufs() */ | |
| list_del_init(&vb->queue); | |
| vb->state = state; | |
| do_gettimeofday(&vb->ts); | |
| vb->field_count++; | |
| wake_up(&vb->done); | |
| if (list_empty(&pcdev->capture)) { | |
| pcdev->active = NULL; | |
| goto out; | |
| } | |
| pcdev->active = list_entry(pcdev->capture.next, | |
| struct mx2_buffer, vb.queue); | |
| vb = &pcdev->active->vb; | |
| vb->state = VIDEOBUF_ACTIVE; | |
| ret = imx_dma_setup_single(pcdev->dma, videobuf_to_dma_contig(vb), | |
| vb->size, (u32)pcdev->base_dma + 0x10, DMA_MODE_READ); | |
| if (ret) { | |
| vb->state = VIDEOBUF_ERROR; | |
| pcdev->active = NULL; | |
| wake_up(&vb->done); | |
| } | |
| out: | |
| spin_unlock_irqrestore(&pcdev->lock, flags); | |
| } | |
| static void mx27_camera_dma_err_callback(int channel, void *data, int err) | |
| { | |
| struct mx2_camera_dev *pcdev = data; | |
| mx27_camera_frame_done(pcdev, VIDEOBUF_ERROR); | |
| } | |
| static void mx27_camera_dma_callback(int channel, void *data) | |
| { | |
| struct mx2_camera_dev *pcdev = data; | |
| mx27_camera_frame_done(pcdev, VIDEOBUF_DONE); | |
| } | |
| #define DMA_REQ_CSI_RX 31 /* FIXME: Add this to a resource */ | |
| static int __devinit mx27_camera_dma_init(struct platform_device *pdev, | |
| struct mx2_camera_dev *pcdev) | |
| { | |
| int err; | |
| pcdev->dma = imx_dma_request_by_prio("CSI RX DMA", DMA_PRIO_HIGH); | |
| if (pcdev->dma < 0) { | |
| dev_err(&pdev->dev, "%s failed to request DMA channel\n", | |
| __func__); | |
| return pcdev->dma; | |
| } | |
| err = imx_dma_setup_handlers(pcdev->dma, mx27_camera_dma_callback, | |
| mx27_camera_dma_err_callback, pcdev); | |
| if (err) { | |
| dev_err(&pdev->dev, "%s failed to set DMA callback\n", | |
| __func__); | |
| goto err_out; | |
| } | |
| err = imx_dma_config_channel(pcdev->dma, | |
| IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_FIFO, | |
| IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR, | |
| DMA_REQ_CSI_RX, 1); | |
| if (err) { | |
| dev_err(&pdev->dev, "%s failed to config DMA channel\n", | |
| __func__); | |
| goto err_out; | |
| } | |
| imx_dma_config_burstlen(pcdev->dma, 64); | |
| return 0; | |
| err_out: | |
| imx_dma_free(pcdev->dma); | |
| return err; | |
| } | |
| #endif /* CONFIG_MACH_MX27 */ | |
| static unsigned int mx2_camera_poll(struct file *file, poll_table *pt) | |
| { | |
| struct soc_camera_device *icd = file->private_data; | |
| return videobuf_poll_stream(file, &icd->vb_vidq, pt); | |
| } | |
| static struct soc_camera_host_ops mx2_soc_camera_host_ops = { | |
| .owner = THIS_MODULE, | |
| .add = mx2_camera_add_device, | |
| .remove = mx2_camera_remove_device, | |
| .set_fmt = mx2_camera_set_fmt, | |
| .set_crop = mx2_camera_set_crop, | |
| .try_fmt = mx2_camera_try_fmt, | |
| .init_videobuf = mx2_camera_init_videobuf, | |
| .reqbufs = mx2_camera_reqbufs, | |
| .poll = mx2_camera_poll, | |
| .querycap = mx2_camera_querycap, | |
| .set_bus_param = mx2_camera_set_bus_param, | |
| }; | |
| static void mx27_camera_frame_done_emma(struct mx2_camera_dev *pcdev, | |
| int bufnum, int state) | |
| { | |
| struct mx2_buffer *buf; | |
| struct videobuf_buffer *vb; | |
| unsigned long phys; | |
| if (!list_empty(&pcdev->active_bufs)) { | |
| buf = list_entry(pcdev->active_bufs.next, | |
| struct mx2_buffer, vb.queue); | |
| BUG_ON(buf->bufnum != bufnum); | |
| vb = &buf->vb; | |
| #ifdef DEBUG | |
| phys = videobuf_to_dma_contig(vb); | |
| if (readl(pcdev->base_emma + PRP_DEST_RGB1_PTR + 4 * bufnum) | |
| != phys) { | |
| dev_err(pcdev->dev, "%p != %p\n", phys, | |
| readl(pcdev->base_emma + | |
| PRP_DEST_RGB1_PTR + | |
| 4 * bufnum)); | |
| } | |
| #endif | |
| dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, vb, | |
| vb->baddr, vb->bsize); | |
| list_del(&vb->queue); | |
| vb->state = state; | |
| do_gettimeofday(&vb->ts); | |
| vb->field_count++; | |
| wake_up(&vb->done); | |
| } | |
| if (list_empty(&pcdev->capture)) { | |
| writel(pcdev->discard_buffer_dma, pcdev->base_emma + | |
| PRP_DEST_RGB1_PTR + 4 * bufnum); | |
| return; | |
| } | |
| buf = list_entry(pcdev->capture.next, | |
| struct mx2_buffer, vb.queue); | |
| buf->bufnum = !bufnum; | |
| list_move_tail(pcdev->capture.next, &pcdev->active_bufs); | |
| vb = &buf->vb; | |
| vb->state = VIDEOBUF_ACTIVE; | |
| phys = videobuf_to_dma_contig(vb); | |
| writel(phys, pcdev->base_emma + PRP_DEST_RGB1_PTR + 4 * bufnum); | |
| } | |
| static irqreturn_t mx27_camera_emma_irq(int irq_emma, void *data) | |
| { | |
| struct mx2_camera_dev *pcdev = data; | |
| unsigned int status = readl(pcdev->base_emma + PRP_INTRSTATUS); | |
| struct mx2_buffer *buf; | |
| if (status & (1 << 7)) { /* overflow */ | |
| u32 cntl; | |
| /* | |
| * We only disable channel 1 here since this is the only | |
| * enabled channel | |
| * | |
| * FIXME: the correct DMA overflow handling should be resetting | |
| * the buffer, returning an error frame, and continuing with | |
| * the next one. | |
| */ | |
| cntl = readl(pcdev->base_emma + PRP_CNTL); | |
| writel(cntl & ~PRP_CNTL_CH1EN, pcdev->base_emma + PRP_CNTL); | |
| writel(cntl, pcdev->base_emma + PRP_CNTL); | |
| } | |
| if ((status & (3 << 5)) == (3 << 5) | |
| && !list_empty(&pcdev->active_bufs)) { | |
| /* | |
| * Both buffers have triggered, process the one we're expecting | |
| * to first | |
| */ | |
| buf = list_entry(pcdev->active_bufs.next, | |
| struct mx2_buffer, vb.queue); | |
| mx27_camera_frame_done_emma(pcdev, buf->bufnum, VIDEOBUF_DONE); | |
| status &= ~(1 << (6 - buf->bufnum)); /* mark processed */ | |
| } | |
| if (status & (1 << 6)) | |
| mx27_camera_frame_done_emma(pcdev, 0, VIDEOBUF_DONE); | |
| if (status & (1 << 5)) | |
| mx27_camera_frame_done_emma(pcdev, 1, VIDEOBUF_DONE); | |
| writel(status, pcdev->base_emma + PRP_INTRSTATUS); | |
| return IRQ_HANDLED; | |
| } | |
| static int __devinit mx27_camera_emma_init(struct mx2_camera_dev *pcdev) | |
| { | |
| struct resource *res_emma = pcdev->res_emma; | |
| int err = 0; | |
| if (!request_mem_region(res_emma->start, resource_size(res_emma), | |
| MX2_CAM_DRV_NAME)) { | |
| err = -EBUSY; | |
| goto out; | |
| } | |
| pcdev->base_emma = ioremap(res_emma->start, resource_size(res_emma)); | |
| if (!pcdev->base_emma) { | |
| err = -ENOMEM; | |
| goto exit_release; | |
| } | |
| err = request_irq(pcdev->irq_emma, mx27_camera_emma_irq, 0, | |
| MX2_CAM_DRV_NAME, pcdev); | |
| if (err) { | |
| dev_err(pcdev->dev, "Camera EMMA interrupt register failed \n"); | |
| goto exit_iounmap; | |
| } | |
| pcdev->clk_emma = clk_get(NULL, "emma"); | |
| if (IS_ERR(pcdev->clk_emma)) { | |
| err = PTR_ERR(pcdev->clk_emma); | |
| goto exit_free_irq; | |
| } | |
| clk_enable(pcdev->clk_emma); | |
| err = mx27_camera_emma_prp_reset(pcdev); | |
| if (err) | |
| goto exit_clk_emma_put; | |
| return err; | |
| exit_clk_emma_put: | |
| clk_disable(pcdev->clk_emma); | |
| clk_put(pcdev->clk_emma); | |
| exit_free_irq: | |
| free_irq(pcdev->irq_emma, pcdev); | |
| exit_iounmap: | |
| iounmap(pcdev->base_emma); | |
| exit_release: | |
| release_mem_region(res_emma->start, resource_size(res_emma)); | |
| out: | |
| return err; | |
| } | |
| static int __devinit mx2_camera_probe(struct platform_device *pdev) | |
| { | |
| struct mx2_camera_dev *pcdev; | |
| struct resource *res_csi, *res_emma; | |
| void __iomem *base_csi; | |
| int irq_csi, irq_emma; | |
| irq_handler_t mx2_cam_irq_handler = cpu_is_mx25() ? mx25_camera_irq | |
| : mx27_camera_irq; | |
| int err = 0; | |
| dev_dbg(&pdev->dev, "initialising\n"); | |
| res_csi = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| irq_csi = platform_get_irq(pdev, 0); | |
| if (res_csi == NULL || irq_csi < 0) { | |
| dev_err(&pdev->dev, "Missing platform resources data\n"); | |
| err = -ENODEV; | |
| goto exit; | |
| } | |
| pcdev = kzalloc(sizeof(*pcdev), GFP_KERNEL); | |
| if (!pcdev) { | |
| dev_err(&pdev->dev, "Could not allocate pcdev\n"); | |
| err = -ENOMEM; | |
| goto exit; | |
| } | |
| pcdev->clk_csi = clk_get(&pdev->dev, NULL); | |
| if (IS_ERR(pcdev->clk_csi)) { | |
| err = PTR_ERR(pcdev->clk_csi); | |
| goto exit_kfree; | |
| } | |
| dev_dbg(&pdev->dev, "Camera clock frequency: %ld\n", | |
| clk_get_rate(pcdev->clk_csi)); | |
| /* Initialize DMA */ | |
| #ifdef CONFIG_MACH_MX27 | |
| if (cpu_is_mx27()) { | |
| err = mx27_camera_dma_init(pdev, pcdev); | |
| if (err) | |
| goto exit_clk_put; | |
| } | |
| #endif /* CONFIG_MACH_MX27 */ | |
| pcdev->res_csi = res_csi; | |
| pcdev->pdata = pdev->dev.platform_data; | |
| if (pcdev->pdata) { | |
| long rate; | |
| pcdev->platform_flags = pcdev->pdata->flags; | |
| rate = clk_round_rate(pcdev->clk_csi, pcdev->pdata->clk * 2); | |
| if (rate <= 0) { | |
| err = -ENODEV; | |
| goto exit_dma_free; | |
| } | |
| err = clk_set_rate(pcdev->clk_csi, rate); | |
| if (err < 0) | |
| goto exit_dma_free; | |
| } | |
| INIT_LIST_HEAD(&pcdev->capture); | |
| INIT_LIST_HEAD(&pcdev->active_bufs); | |
| spin_lock_init(&pcdev->lock); | |
| /* | |
| * Request the regions. | |
| */ | |
| if (!request_mem_region(res_csi->start, resource_size(res_csi), | |
| MX2_CAM_DRV_NAME)) { | |
| err = -EBUSY; | |
| goto exit_dma_free; | |
| } | |
| base_csi = ioremap(res_csi->start, resource_size(res_csi)); | |
| if (!base_csi) { | |
| err = -ENOMEM; | |
| goto exit_release; | |
| } | |
| pcdev->irq_csi = irq_csi; | |
| pcdev->base_csi = base_csi; | |
| pcdev->base_dma = res_csi->start; | |
| pcdev->dev = &pdev->dev; | |
| err = request_irq(pcdev->irq_csi, mx2_cam_irq_handler, 0, | |
| MX2_CAM_DRV_NAME, pcdev); | |
| if (err) { | |
| dev_err(pcdev->dev, "Camera interrupt register failed \n"); | |
| goto exit_iounmap; | |
| } | |
| if (cpu_is_mx27()) { | |
| /* EMMA support */ | |
| res_emma = platform_get_resource(pdev, IORESOURCE_MEM, 1); | |
| irq_emma = platform_get_irq(pdev, 1); | |
| if (res_emma && irq_emma >= 0) { | |
| dev_info(&pdev->dev, "Using EMMA\n"); | |
| pcdev->use_emma = 1; | |
| pcdev->res_emma = res_emma; | |
| pcdev->irq_emma = irq_emma; | |
| if (mx27_camera_emma_init(pcdev)) | |
| goto exit_free_irq; | |
| } | |
| } | |
| pcdev->soc_host.drv_name = MX2_CAM_DRV_NAME, | |
| pcdev->soc_host.ops = &mx2_soc_camera_host_ops, | |
| pcdev->soc_host.priv = pcdev; | |
| pcdev->soc_host.v4l2_dev.dev = &pdev->dev; | |
| pcdev->soc_host.nr = pdev->id; | |
| err = soc_camera_host_register(&pcdev->soc_host); | |
| if (err) | |
| goto exit_free_emma; | |
| dev_info(&pdev->dev, "MX2 Camera (CSI) driver probed, clock frequency: %ld\n", | |
| clk_get_rate(pcdev->clk_csi)); | |
| return 0; | |
| exit_free_emma: | |
| if (mx27_camera_emma(pcdev)) { | |
| free_irq(pcdev->irq_emma, pcdev); | |
| clk_disable(pcdev->clk_emma); | |
| clk_put(pcdev->clk_emma); | |
| iounmap(pcdev->base_emma); | |
| release_mem_region(res_emma->start, resource_size(res_emma)); | |
| } | |
| exit_free_irq: | |
| free_irq(pcdev->irq_csi, pcdev); | |
| exit_iounmap: | |
| iounmap(base_csi); | |
| exit_release: | |
| release_mem_region(res_csi->start, resource_size(res_csi)); | |
| exit_dma_free: | |
| #ifdef CONFIG_MACH_MX27 | |
| if (cpu_is_mx27()) | |
| imx_dma_free(pcdev->dma); | |
| exit_clk_put: | |
| clk_put(pcdev->clk_csi); | |
| #endif /* CONFIG_MACH_MX27 */ | |
| exit_kfree: | |
| kfree(pcdev); | |
| exit: | |
| return err; | |
| } | |
| static int __devexit mx2_camera_remove(struct platform_device *pdev) | |
| { | |
| struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev); | |
| struct mx2_camera_dev *pcdev = container_of(soc_host, | |
| struct mx2_camera_dev, soc_host); | |
| struct resource *res; | |
| clk_put(pcdev->clk_csi); | |
| #ifdef CONFIG_MACH_MX27 | |
| if (cpu_is_mx27()) | |
| imx_dma_free(pcdev->dma); | |
| #endif /* CONFIG_MACH_MX27 */ | |
| free_irq(pcdev->irq_csi, pcdev); | |
| if (mx27_camera_emma(pcdev)) | |
| free_irq(pcdev->irq_emma, pcdev); | |
| soc_camera_host_unregister(&pcdev->soc_host); | |
| iounmap(pcdev->base_csi); | |
| if (mx27_camera_emma(pcdev)) { | |
| clk_disable(pcdev->clk_emma); | |
| clk_put(pcdev->clk_emma); | |
| iounmap(pcdev->base_emma); | |
| res = pcdev->res_emma; | |
| release_mem_region(res->start, resource_size(res)); | |
| } | |
| res = pcdev->res_csi; | |
| release_mem_region(res->start, resource_size(res)); | |
| kfree(pcdev); | |
| dev_info(&pdev->dev, "MX2 Camera driver unloaded\n"); | |
| return 0; | |
| } | |
| static struct platform_driver mx2_camera_driver = { | |
| .driver = { | |
| .name = MX2_CAM_DRV_NAME, | |
| }, | |
| .remove = __devexit_p(mx2_camera_remove), | |
| }; | |
| static int __init mx2_camera_init(void) | |
| { | |
| return platform_driver_probe(&mx2_camera_driver, &mx2_camera_probe); | |
| } | |
| static void __exit mx2_camera_exit(void) | |
| { | |
| return platform_driver_unregister(&mx2_camera_driver); | |
| } | |
| module_init(mx2_camera_init); | |
| module_exit(mx2_camera_exit); | |
| MODULE_DESCRIPTION("i.MX27/i.MX25 SoC Camera Host driver"); | |
| MODULE_AUTHOR("Sascha Hauer <sha@pengutronix.de>"); | |
| MODULE_LICENSE("GPL"); |