blob: 21a5d8d413f0afa45258cb0b87ad08d857e1b181 [file] [log] [blame]
/*
* Copyright (C) 2004-2010 NXP Software
* Copyright (C) 2010 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/************************************************************************************/
/* */
/* Includes */
/* */
/************************************************************************************/
#include "LVPSA.h"
#include "LVPSA_QPD.h"
/************************************************************************************/
/* */
/* Sample rate table */
/* */
/************************************************************************************/
/*
* Sample rate table for converting between the enumerated type and the actual
* frequency
*/
const LVM_UINT16 LVPSA_SampleRateTab[] = { 8000, /* 8kS/s */
11025,
12000,
16000,
22050,
24000,
32000,
44100,
48000}; /* 48kS/s */
/************************************************************************************/
/* */
/* Sample rate inverse table */
/* */
/************************************************************************************/
/*
* Sample rate table for converting between the enumerated type and the actual
* frequency
*/
const LVM_UINT32 LVPSA_SampleRateInvTab[] = { 268435, /* 8kS/s */
194783,
178957,
134218,
97391,
89478,
67109,
48696,
44739}; /* 48kS/s */
/************************************************************************************/
/* */
/* Number of samples in 20ms */
/* */
/************************************************************************************/
/*
* Table for converting between the enumerated type and the number of samples
* during 20ms
*/
const LVM_UINT16 LVPSA_nSamplesBufferUpdate[] = { 160, /* 8kS/s */
220,
240,
320,
441,
480,
640,
882,
960}; /* 48kS/s */
/************************************************************************************/
/* */
/* Down sampling factors */
/* */
/************************************************************************************/
/*
* Table for converting between the enumerated type and the down sampling factor
*/
const LVM_UINT16 LVPSA_DownSamplingFactor[] = { 5, /* 8000 S/s */
7, /* 11025 S/s */
8, /* 12000 S/s */
10, /* 16000 S/s */
15, /* 22050 S/s */
16, /* 24000 S/s */
21, /* 32000 S/s */
30, /* 44100 S/s */
32}; /* 48000 S/s */
/************************************************************************************/
/* */
/* Coefficient calculation tables */
/* */
/************************************************************************************/
/*
* Table for 2 * Pi / Fs
*/
const LVM_INT16 LVPSA_TwoPiOnFsTable[] = { 26354, /* 8kS/s */
19123,
17569,
13177,
9561,
8785,
6588,
4781,
4392}; /* 48kS/s */
/*
* Gain table
*/
const LVM_INT16 LVPSA_GainTable[] = { 364, /* -15dB gain */
408,
458,
514,
577,
647,
726,
815,
914,
1026,
1151,
1292,
1449,
1626,
1825,
2048, /* 0dB gain */
2297,
2578,
2892,
3245,
3641,
4096,
4584,
5144,
5772,
6476,
7266,
8153,
9148,
10264,
11576}; /* +15dB gain */
/************************************************************************************/
/* */
/* Cosone polynomial coefficients */
/* */
/************************************************************************************/
/*
* Coefficients for calculating the cosine with the equation:
*
* Cos(x) = (2^Shifts)*(a0 + a1*x + a2*x^2 + a3*x^3 + a4*x^4 + a5*x^5)
*
* These coefficients expect the input, x, to be in the range 0 to 32768 respresenting
* a range of 0 to Pi. The output is in the range 32767 to -32768 representing the range
* +1.0 to -1.0
*/
const LVM_INT16 LVPSA_CosCoef[] = { 3, /* Shifts */
4096, /* a0 */
-36, /* a1 */
-19725, /* a2 */
-2671, /* a3 */
23730, /* a4 */
-9490}; /* a5 */
/*
* Coefficients for calculating the cosine error with the equation:
*
* CosErr(x) = (2^Shifts)*(a0 + a1*x + a2*x^2 + a3*x^3)
*
* These coefficients expect the input, x, to be in the range 0 to 32768 respresenting
* a range of 0 to Pi/25. The output is in the range 0 to 32767 representing the range
* 0.0 to 0.0078852986
*
* This is used to give a double precision cosine over the range 0 to Pi/25 using the
* the equation:
*
* Cos(x) = 1.0 - CosErr(x)
*/
const LVM_INT16 LVPSA_DPCosCoef[] = { 1, /* Shifts */
0, /* a0 */
-6, /* a1 */
16586, /* a2 */
-44}; /* a3 */
/************************************************************************************/
/* */
/* Quasi peak filter coefficients table */
/* */
/************************************************************************************/
const QPD_C32_Coefs LVPSA_QPD_Coefs[] = {
{0x80CEFD2B,0x00CB9B17}, /* 8kS/s */ /* LVPSA_SPEED_LOW */
{0x80D242E7,0x00CED11D},
{0x80DCBAF5,0x00D91679},
{0x80CEFD2B,0x00CB9B17},
{0x80E13739,0x00DD7CD3},
{0x80DCBAF5,0x00D91679},
{0x80D94BAF,0x00D5B7E7},
{0x80E13739,0x00DD7CD3},
{0x80DCBAF5,0x00D91679}, /* 48kS/s */
{0x8587513D,0x055C22CF}, /* 8kS/s */ /* LVPSA_SPEED_MEDIUM */
{0x859D2967,0x0570F007},
{0x85E2EFAC,0x05B34D79},
{0x8587513D,0x055C22CF},
{0x8600C7B9,0x05CFA6CF},
{0x85E2EFAC,0x05B34D79},
{0x85CC1018,0x059D8F69},
{0x8600C7B9,0x05CFA6CF},//{0x8600C7B9,0x05CFA6CF},
{0x85E2EFAC,0x05B34D79}, /* 48kS/s */
{0xA115EA7A,0x1CDB3F5C}, /* 8kS/s */ /* LVPSA_SPEED_HIGH */
{0xA18475F0,0x1D2C83A2},
{0xA2E1E950,0x1E2A532E},
{0xA115EA7A,0x1CDB3F5C},
{0xA375B2C6,0x1E943BBC},
{0xA2E1E950,0x1E2A532E},
{0xA26FF6BD,0x1DD81530},
{0xA375B2C6,0x1E943BBC},
{0xA2E1E950,0x1E2A532E}}; /* 48kS/s */