blob: 806474d816194ed61e883b32258b850d4a0a6a07 [file] [log] [blame]
/* ------------------------------------------------------------------
* Copyright (C) 1998-2009 PacketVideo
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
* express or implied.
* See the License for the specific language governing permissions
* and limitations under the License.
* -------------------------------------------------------------------
*/
/****************************************************************************************
Portions of this file are derived from the following 3GPP standard:
3GPP TS 26.073
ANSI-C code for the Adaptive Multi-Rate (AMR) speech codec
Available from http://www.3gpp.org
(C) 2004, 3GPP Organizational Partners (ARIB, ATIS, CCSA, ETSI, TTA, TTC)
Permission to distribute, modify and use this file under the standard license
terms listed above has been obtained from the copyright holder.
****************************************************************************************/
/*
Pathname: ./audio/gsm-amr/c/src/int_lpc.c
Functions:
------------------------------------------------------------------------------
REVISION HISTORY
Description: Updated template used to PV coding template.
Changed to accept the pOverflow flag for EPOC compatibility.
Description: Per review comments, replaced includes of "basic_op.h"
and "count.h" with "shr.h", "sub.h", and "add.h"
Description: For Int_lpc_1and3() and Int_lpc_1and3_2()
1. Replaced array addressing by pointers
2. Eliminated math operations that unnecessary checked for
saturation
3. Unrolled loops to speed up processing
Description: Replaced "int" and/or "char" with OSCL defined types.
Who: Date:
Description:
------------------------------------------------------------------------------
MODULE DESCRIPTION
------------------------------------------------------------------------------
*/
/*----------------------------------------------------------------------------
; INCLUDES
----------------------------------------------------------------------------*/
#include "int_lpc.h"
#include "typedef.h"
#include "cnst.h"
#include "lsp_az.h"
#include "basic_op.h"
/*----------------------------------------------------------------------------
; MACROS
; Define module specific macros here
----------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------
; DEFINES
; Include all pre-processor statements here. Include conditional
; compile variables also.
----------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------
; LOCAL FUNCTION DEFINITIONS
; Function Prototype declaration
----------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------
; LOCAL VARIABLE DEFINITIONS
; Variable declaration - defined here and used outside this module
----------------------------------------------------------------------------*/
/*
------------------------------------------------------------------------------
FUNCTION NAME: Int_lpc_1and3
------------------------------------------------------------------------------
INPUT AND OUTPUT DEFINITIONS
Inputs:
lsp_old -- array of type Word16 -- LSP vector at the
4th subfr. of past frame (M)
lsp_mid -- array of type Word16 -- LSP vector at the 2nd subfr. of
present frame (M)
lsp_new -- array of type Word16 -- LSP vector at the 4th subfr. of
present frame (M)
Outputs:
Az -- array of type Word16 -- interpolated LP parameters in all subfr.
(AZ_SIZE)
pOverflow -- pointer to type Flag -- Overflow indicator
Returns:
None
Global Variables Used:
None
Local Variables Needed:
None
------------------------------------------------------------------------------
FUNCTION DESCRIPTION
Purpose : Interpolates the LSPs and converts to LPC parameters
to get a different LP filter in each subframe.
Description : The 20 ms speech frame is divided into 4 subframes.
The LSPs are quantized and transmitted at the 2nd and
4th subframes (twice per frame) and interpolated at the
1st and 3rd subframe.
|------|------|------|------|
sf1 sf2 sf3 sf4
F0 Fm F1
sf1: 1/2 Fm + 1/2 F0 sf3: 1/2 F1 + 1/2 Fm
sf2: Fm sf4: F1
------------------------------------------------------------------------------
REQUIREMENTS
None
------------------------------------------------------------------------------
REFERENCES
int_lpc.c, UMTS GSM AMR speech codec, R99 - Version 3.2.0, March 2, 2001
------------------------------------------------------------------------------
PSEUDO-CODE
------------------------------------------------------------------------------
RESOURCES USED [optional]
When the code is written for a specific target processor the
the resources used should be documented below.
HEAP MEMORY USED: x bytes
STACK MEMORY USED: x bytes
CLOCK CYCLES: (cycle count equation for this function) + (variable
used to represent cycle count for each subroutine
called)
where: (cycle count variable) = cycle count for [subroutine
name]
------------------------------------------------------------------------------
CAUTION [optional]
[State any special notes, constraints or cautions for users of this function]
------------------------------------------------------------------------------
*/
void Int_lpc_1and3(
Word16 lsp_old[], /* i : LSP vector at the 4th subfr. of past frame (M) */
Word16 lsp_mid[], /* i : LSP vector at the 2nd subfr. of
present frame (M) */
Word16 lsp_new[], /* i : LSP vector at the 4th subfr. of
present frame (M) */
Word16 Az[], /* o : interpolated LP parameters in all subfr.
(AZ_SIZE) */
Flag *pOverflow
)
{
Word16 i;
Word16 lsp[M];
Word16 *p_lsp_old = &lsp_old[0];
Word16 *p_lsp_mid = &lsp_mid[0];
Word16 *p_lsp_new = &lsp_new[0];
Word16 *p_lsp = &lsp[0];
/* lsp[i] = lsp_mid[i] * 0.5 + lsp_old[i] * 0.5 */
for (i = M >> 1; i != 0; i--)
{
*(p_lsp++) = (*(p_lsp_old++) >> 1) + (*(p_lsp_mid++) >> 1);
*(p_lsp++) = (*(p_lsp_old++) >> 1) + (*(p_lsp_mid++) >> 1);
}
Lsp_Az(
lsp,
Az,
pOverflow); /* Subframe 1 */
Az += MP1;
Lsp_Az(
lsp_mid,
Az,
pOverflow); /* Subframe 2 */
Az += MP1;
p_lsp_mid = &lsp_mid[0];
p_lsp = &lsp[0];
for (i = M >> 1; i != 0; i--)
{
*(p_lsp++) = (*(p_lsp_mid++) >> 1) + (*(p_lsp_new++) >> 1);
*(p_lsp++) = (*(p_lsp_mid++) >> 1) + (*(p_lsp_new++) >> 1);
}
Lsp_Az(
lsp,
Az,
pOverflow); /* Subframe 3 */
Az += MP1;
Lsp_Az(
lsp_new,
Az,
pOverflow); /* Subframe 4 */
return;
}
/*
------------------------------------------------------------------------------
FUNCTION NAME: Int_lpc_1and3_2
------------------------------------------------------------------------------
INPUT AND OUTPUT DEFINITIONS
Inputs:
lsp_old -- array of type Word16 -- LSP vector at the
4th subfr. of past frame (M)
lsp_mid -- array of type Word16 -- LSP vector at the 2nd subfr. of
present frame (M)
lsp_new -- array of type Word16 -- LSP vector at the 4th subfr. of
present frame (M)
Outputs:
Az -- array of type Word16 -- interpolated LP parameters in.
subfr 1 and 2.
pOverflow -- pointer to type Flag -- Overflow indicator
Returns:
None
Global Variables Used:
Local Variables Needed:
None
------------------------------------------------------------------------------
FUNCTION DESCRIPTION
Purpose : Interpolation of the LPC parameters. Same as the Int_lpc
function but we do not recompute Az() for subframe 2 and
4 because it is already available.
------------------------------------------------------------------------------
REQUIREMENTS
None
------------------------------------------------------------------------------
REFERENCES
int_lpc.c, UMTS GSM AMR speech codec, R99 - Version 3.2.0, March 2, 2001
------------------------------------------------------------------------------
PSEUDO-CODE
------------------------------------------------------------------------------
RESOURCES USED [optional]
When the code is written for a specific target processor the
the resources used should be documented below.
HEAP MEMORY USED: x bytes
STACK MEMORY USED: x bytes
CLOCK CYCLES: (cycle count equation for this function) + (variable
used to represent cycle count for each subroutine
called)
where: (cycle count variable) = cycle count for [subroutine
name]
------------------------------------------------------------------------------
CAUTION [optional]
[State any special notes, constraints or cautions for users of this function]
------------------------------------------------------------------------------
*/
void Int_lpc_1and3_2(
Word16 lsp_old[], /* i : LSP vector at the 4th subfr. of past frame (M) */
Word16 lsp_mid[], /* i : LSP vector at the 2nd subframe of
present frame (M) */
Word16 lsp_new[], /* i : LSP vector at the 4th subframe of
present frame (M) */
Word16 Az[], /* o :interpolated LP parameters
in subframes 1 and 3 (AZ_SIZE) */
Flag *pOverflow
)
{
Word16 i;
Word16 lsp[M];
Word16 *p_lsp_old = &lsp_old[0];
Word16 *p_lsp_mid = &lsp_mid[0];
Word16 *p_lsp_new = &lsp_new[0];
Word16 *p_lsp = &lsp[0];
/* lsp[i] = lsp_mid[i] * 0.5 + lsp_old[i] * 0.5 */
for (i = M >> 1; i != 0; i--)
{
*(p_lsp++) = (*(p_lsp_old++) >> 1) + (*(p_lsp_mid++) >> 1);
*(p_lsp++) = (*(p_lsp_old++) >> 1) + (*(p_lsp_mid++) >> 1);
}
Lsp_Az(lsp, Az, pOverflow); /* Subframe 1 */
Az += MP1 * 2;
p_lsp_mid = &lsp_mid[0];
p_lsp = &lsp[0];
for (i = M >> 1; i != 0; i--)
{
*(p_lsp++) = (*(p_lsp_mid++) >> 1) + (*(p_lsp_new++) >> 1);
*(p_lsp++) = (*(p_lsp_mid++) >> 1) + (*(p_lsp_new++) >> 1);
}
Lsp_Az(lsp, Az, pOverflow); /* Subframe 3 */
return;
}
/*
------------------------------------------------------------------------------
FUNCTION NAME: lsp
------------------------------------------------------------------------------
INPUT AND OUTPUT DEFINITIONS
Inputs:
lsp_old -- array of type Word16 -- LSP vector at the
4th subfr. of past frame (M)
lsp_new -- array of type Word16 -- LSP vector at the 4th subfr. of
present frame (M)
Outputs:
Az -- array of type Word16 -- interpolated LP parameters in.
all subframes.
pOverflow -- pointer to type Flag -- Overflow indicator
Returns:
None
Global Variables Used:
Local Variables Needed:
None
------------------------------------------------------------------------------
FUNCTION DESCRIPTION
PURPOSE: Interpolates the LSPs and convert to LP parameters to get
a different LP filter in each subframe.
DESCRIPTION:
The 20 ms speech frame is divided into 4 subframes.
The LSPs are quantized and transmitted at the 4th subframe
(once per frame) and interpolated at the 1st, 2nd and 3rd subframe.
|------|------|------|------|
sf1 sf2 sf3 sf4
F0 F1
sf1: 3/4 F0 + 1/4 F1 sf3: 1/4 F0 + 3/4 F1
sf2: 1/2 F0 + 1/2 F1 sf4: F1
------------------------------------------------------------------------------
REQUIREMENTS
None
------------------------------------------------------------------------------
REFERENCES
int_lpc.c, UMTS GSM AMR speech codec, R99 - Version 3.2.0, March 2, 2001
------------------------------------------------------------------------------
PSEUDO-CODE
------------------------------------------------------------------------------
RESOURCES USED [optional]
When the code is written for a specific target processor the
the resources used should be documented below.
HEAP MEMORY USED: x bytes
STACK MEMORY USED: x bytes
CLOCK CYCLES: (cycle count equation for this function) + (variable
used to represent cycle count for each subroutine
called)
where: (cycle count variable) = cycle count for [subroutine
name]
------------------------------------------------------------------------------
CAUTION [optional]
[State any special notes, constraints or cautions for users of this function]
------------------------------------------------------------------------------
*/
void Int_lpc_1to3(
Word16 lsp_old[], /* input : LSP vector at the 4th SF of past frame */
Word16 lsp_new[], /* input : LSP vector at the 4th SF of present frame */
Word16 Az[], /* output: interpolated LP parameters in all SFs */
Flag *pOverflow
)
{
Word16 i;
Word16 temp;
Word16 temp2;
Word16 lsp[M];
for (i = 0; i < M; i++)
{
temp = shr(lsp_old[i], 2, pOverflow);
temp = sub(lsp_old[i], temp, pOverflow);
temp2 = shr(lsp_new[i], 2, pOverflow);
lsp[i] = add(temp2, temp, pOverflow);
}
Lsp_Az(
lsp,
Az,
pOverflow); /* Subframe 1 */
Az += MP1;
for (i = 0; i < M; i++)
{
temp = shr(lsp_new[i], 1, pOverflow);
temp2 = shr(lsp_old[i], 1, pOverflow);
lsp[i] = add(temp, temp2, pOverflow);
}
Lsp_Az(
lsp,
Az,
pOverflow); /* Subframe 2 */
Az += MP1;
for (i = 0; i < M; i++)
{
temp = shr(lsp_new[i], 2, pOverflow);
temp = sub(lsp_new[i], temp, pOverflow);
temp2 = shr(lsp_old[i], 2, pOverflow);
lsp[i] = add(temp2, temp, pOverflow);
}
Lsp_Az(
lsp,
Az,
pOverflow); /* Subframe 3 */
Az += MP1;
Lsp_Az(
lsp_new,
Az,
pOverflow); /* Subframe 4 */
return;
}
/*
------------------------------------------------------------------------------
FUNCTION NAME: Int_lpc_1to3_2
------------------------------------------------------------------------------
INPUT AND OUTPUT DEFINITIONS
Inputs:
lsp_old -- array of type Word16 -- LSP vector at the
4th subfr. of past frame (M)
lsp_new -- array of type Word16 -- LSP vector at the 4th subfr. of
present frame (M)
Outputs:
Az -- array of type Word16 -- interpolated LP parameters in.
subfr 1, 2, and 3.
pOverflow -- pointer to type Flag -- Overflow indicator
Returns:
None
Global Variables Used:
None
Local Variables Needed:
None
------------------------------------------------------------------------------
FUNCTION DESCRIPTION
Interpolation of the LPC parameters.
Same as the previous function but we do not recompute Az() for
subframe 4 because it is already available.
------------------------------------------------------------------------------
REQUIREMENTS
None
------------------------------------------------------------------------------
REFERENCES
int_lpc.c, UMTS GSM AMR speech codec, R99 - Version 3.2.0, March 2, 2001
------------------------------------------------------------------------------
PSEUDO-CODE
------------------------------------------------------------------------------
RESOURCES USED [optional]
When the code is written for a specific target processor the
the resources used should be documented below.
HEAP MEMORY USED: x bytes
STACK MEMORY USED: x bytes
CLOCK CYCLES: (cycle count equation for this function) + (variable
used to represent cycle count for each subroutine
called)
where: (cycle count variable) = cycle count for [subroutine
name]
------------------------------------------------------------------------------
CAUTION [optional]
[State any special notes, constraints or cautions for users of this function]
------------------------------------------------------------------------------
*/
void Int_lpc_1to3_2(
Word16 lsp_old[], /* input : LSP vector at the 4th SF of past frame */
Word16 lsp_new[], /* input : LSP vector at the 4th SF of present frame */
Word16 Az[], /* output: interpolated LP parameters in SFs 1,2,3 */
Flag *pOverflow
)
{
Word16 i;
Word16 temp;
Word16 temp2;
Word16 lsp[M];
for (i = 0; i < M; i++)
{
temp = shr(lsp_old[i], 2, pOverflow);
temp = sub(lsp_old[i], temp, pOverflow);
temp2 = shr(lsp_new[i], 2, pOverflow);
lsp[i] = add(temp2, temp, pOverflow);
}
Lsp_Az(
lsp,
Az,
pOverflow); /* Subframe 1 */
Az += MP1;
for (i = 0; i < M; i++)
{
temp = shr(lsp_new[i], 1, pOverflow);
temp2 = shr(lsp_old[i], 1, pOverflow);
lsp[i] = add(temp2, temp, pOverflow);
}
Lsp_Az(
lsp,
Az,
pOverflow); /* Subframe 2 */
Az += MP1;
for (i = 0; i < M; i++)
{
temp = shr(lsp_new[i], 2, pOverflow);
temp = sub(lsp_new[i], temp, pOverflow);
temp2 = shr(lsp_old[i], 2, pOverflow);
lsp[i] = add(temp, temp2, pOverflow);
}
Lsp_Az(
lsp,
Az,
pOverflow); /* Subframe 3 */
return;
}