| /* |
| [auto_generated] |
| boost/numeric/odeint/stepper/base/explicit_error_stepper_base.hpp |
| |
| [begin_description] |
| Base class for all explicit Runge Kutta stepper which are also error steppers. |
| [end_description] |
| |
| Copyright 2010-2013 Karsten Ahnert |
| Copyright 2010-2012 Mario Mulansky |
| Copyright 2012 Christoph Koke |
| |
| Distributed under the Boost Software License, Version 1.0. |
| (See accompanying file LICENSE_1_0.txt or |
| copy at http://www.boost.org/LICENSE_1_0.txt) |
| */ |
| |
| |
| #ifndef BOOST_NUMERIC_ODEINT_STEPPER_BASE_EXPLICIT_ERROR_STEPPER_BASE_HPP_INCLUDED |
| #define BOOST_NUMERIC_ODEINT_STEPPER_BASE_EXPLICIT_ERROR_STEPPER_BASE_HPP_INCLUDED |
| |
| #include <boost/utility/enable_if.hpp> |
| #include <boost/type_traits/is_same.hpp> |
| |
| |
| #include <boost/numeric/odeint/util/bind.hpp> |
| #include <boost/numeric/odeint/util/unwrap_reference.hpp> |
| #include <boost/numeric/odeint/util/state_wrapper.hpp> |
| #include <boost/numeric/odeint/util/is_resizeable.hpp> |
| #include <boost/numeric/odeint/util/resizer.hpp> |
| |
| #include <boost/numeric/odeint/stepper/stepper_categories.hpp> |
| |
| #include <boost/numeric/odeint/stepper/base/algebra_stepper_base.hpp> |
| |
| namespace boost { |
| namespace numeric { |
| namespace odeint { |
| |
| |
| /* |
| * base class for explicit stepper and error steppers |
| * models the stepper AND the error stepper concept |
| * |
| * this class provides the following do_step variants: |
| * do_step( sys , x , t , dt ) |
| * do_step( sys , x , dxdt , t , dt ) |
| * do_step( sys , in , t , out , dt ) |
| * do_step( sys , in , dxdt , t , out , dt ) |
| * do_step( sys , x , t , dt , xerr ) |
| * do_step( sys , x , dxdt , t , dt , xerr ) |
| * do_step( sys , in , t , out , dt , xerr ) |
| * do_step( sys , in , dxdt , t , out , dt , xerr ) |
| */ |
| template< |
| class Stepper , |
| unsigned short Order , |
| unsigned short StepperOrder , |
| unsigned short ErrorOrder , |
| class State , |
| class Value , |
| class Deriv , |
| class Time , |
| class Algebra , |
| class Operations , |
| class Resizer |
| > |
| class explicit_error_stepper_base : public algebra_stepper_base< Algebra , Operations > |
| { |
| public: |
| |
| typedef algebra_stepper_base< Algebra , Operations > algebra_stepper_base_type; |
| typedef typename algebra_stepper_base_type::algebra_type algebra_type; |
| |
| |
| typedef State state_type; |
| typedef Value value_type; |
| typedef Deriv deriv_type; |
| typedef Time time_type; |
| typedef Resizer resizer_type; |
| typedef Stepper stepper_type; |
| typedef explicit_error_stepper_tag stepper_category; |
| #ifndef DOXYGEN_SKIP |
| typedef state_wrapper< state_type > wrapped_state_type; |
| typedef state_wrapper< deriv_type > wrapped_deriv_type; |
| typedef explicit_error_stepper_base< Stepper , Order , StepperOrder , ErrorOrder , |
| State , Value , Deriv , Time , Algebra , Operations , Resizer > internal_stepper_base_type; |
| #endif |
| |
| typedef unsigned short order_type; |
| static const order_type order_value = Order; |
| static const order_type stepper_order_value = StepperOrder; |
| static const order_type error_order_value = ErrorOrder; |
| |
| |
| explicit_error_stepper_base( const algebra_type &algebra = algebra_type() ) |
| : algebra_stepper_base_type( algebra ) |
| { } |
| |
| order_type order( void ) const |
| { |
| return order_value; |
| } |
| |
| order_type stepper_order( void ) const |
| { |
| return stepper_order_value; |
| } |
| |
| order_type error_order( void ) const |
| { |
| return error_order_value; |
| } |
| |
| |
| |
| /* |
| * Version 1 : do_step( sys , x , t , dt ) |
| * |
| * the two overloads are needed in order to solve the forwarding problem |
| */ |
| template< class System , class StateInOut > |
| void do_step( System system , StateInOut &x , time_type t , time_type dt ) |
| { |
| do_step_v1( system , x , t , dt ); |
| } |
| |
| /** |
| * \brief Second version to solve the forwarding problem, can be called with Boost.Range as StateInOut. |
| */ |
| template< class System , class StateInOut > |
| void do_step( System system , const StateInOut &x , time_type t , time_type dt ) |
| { |
| do_step_v1( system , x , t , dt ); |
| } |
| |
| |
| |
| /* |
| * Version 2 : do_step( sys , x , dxdt , t , dt ) |
| * |
| * this version does not solve the forwarding problem, boost.range can not be used |
| * |
| * the disable is needed to avoid ambiguous overloads if state_type = time_type |
| */ |
| template< class System , class StateInOut , class DerivIn > |
| typename boost::disable_if< boost::is_same< DerivIn , time_type > , void >::type |
| do_step( System system , StateInOut &x , const DerivIn &dxdt , time_type t , time_type dt ) |
| { |
| this->stepper().do_step_impl( system , x , dxdt , t , x , dt ); |
| } |
| |
| |
| /* |
| * named Version 2: do_step_dxdt_impl( sys , in , dxdt , t , dt ) |
| * |
| * this version is needed when this stepper is used for initializing |
| * multistep stepper like adams-bashforth. Hence we provide an explicitely |
| * named version that is not disabled. Meant for internal use only. |
| */ |
| template < class System, class StateInOut, class DerivIn > |
| void do_step_dxdt_impl( System system, StateInOut &x, const DerivIn &dxdt, |
| time_type t, time_type dt ) |
| { |
| this->stepper().do_step_impl( system , x , dxdt , t , x , dt ); |
| } |
| |
| |
| |
| /* |
| * Version 3 : do_step( sys , in , t , out , dt ) |
| * |
| * this version does not solve the forwarding problem, boost.range can not be used |
| * |
| * the disable is needed to avoid ambiguous overloads if state_type = time_type |
| */ |
| template< class System , class StateIn , class StateOut > |
| typename boost::disable_if< boost::is_same< StateIn , time_type > , void >::type |
| do_step( System system , const StateIn &in , time_type t , StateOut &out , time_type dt ) |
| { |
| typename odeint::unwrap_reference< System >::type &sys = system; |
| m_resizer.adjust_size( in , detail::bind( &internal_stepper_base_type::template resize_impl<StateIn> , detail::ref( *this ) , detail::_1 ) ); |
| sys( in , m_dxdt.m_v ,t ); |
| this->stepper().do_step_impl( system , in , m_dxdt.m_v , t , out , dt ); |
| } |
| |
| /* |
| * Version 4 :do_step( sys , in , dxdt , t , out , dt ) |
| * |
| * this version does not solve the forwarding problem, boost.range can not be used |
| * |
| * the disable is needed to avoid ambiguous overloads if state_type = time_type |
| */ |
| template< class System , class StateIn , class DerivIn , class StateOut > |
| typename boost::disable_if< boost::is_same< DerivIn , time_type > , void >::type |
| do_step( System system , const StateIn &in , const DerivIn &dxdt , time_type t , StateOut &out , time_type dt ) |
| { |
| this->stepper().do_step_impl( system , in , dxdt , t , out , dt ); |
| } |
| |
| /* |
| * named Version 4: do_step_dxdt_impl( sys , in , dxdt , t , out, dt ) |
| * |
| * this version is needed when this stepper is used for initializing |
| * multistep stepper like adams-bashforth. Hence we provide an explicitely |
| * named version that is not disabled. Meant for internal use only. |
| */ |
| template < class System, class StateIn, class DerivIn, class StateOut > |
| void do_step_dxdt_impl( System system, const StateIn &in, |
| const DerivIn &dxdt, time_type t, StateOut &out, |
| time_type dt ) |
| { |
| this->stepper().do_step_impl( system , in , dxdt , t , out , dt ); |
| } |
| |
| /* |
| * Version 5 :do_step( sys , x , t , dt , xerr ) |
| * |
| * the two overloads are needed in order to solve the forwarding problem |
| */ |
| template< class System , class StateInOut , class Err > |
| void do_step( System system , StateInOut &x , time_type t , time_type dt , Err &xerr ) |
| { |
| do_step_v5( system , x , t , dt , xerr ); |
| } |
| |
| /** |
| * \brief Second version to solve the forwarding problem, can be called with Boost.Range as StateInOut. |
| */ |
| template< class System , class StateInOut , class Err > |
| void do_step( System system , const StateInOut &x , time_type t , time_type dt , Err &xerr ) |
| { |
| do_step_v5( system , x , t , dt , xerr ); |
| } |
| |
| |
| /* |
| * Version 6 :do_step( sys , x , dxdt , t , dt , xerr ) |
| * |
| * this version does not solve the forwarding problem, boost.range can not be used |
| * |
| * the disable is needed to avoid ambiguous overloads if state_type = time_type |
| */ |
| template< class System , class StateInOut , class DerivIn , class Err > |
| typename boost::disable_if< boost::is_same< DerivIn , time_type > , void >::type |
| do_step( System system , StateInOut &x , const DerivIn &dxdt , time_type t , time_type dt , Err &xerr ) |
| { |
| this->stepper().do_step_impl( system , x , dxdt , t , x , dt , xerr ); |
| } |
| |
| |
| /* |
| * Version 7 : do_step( sys , in , t , out , dt , xerr ) |
| * |
| * this version does not solve the forwarding problem, boost.range can not be used |
| */ |
| template< class System , class StateIn , class StateOut , class Err > |
| void do_step( System system , const StateIn &in , time_type t , StateOut &out , time_type dt , Err &xerr ) |
| { |
| typename odeint::unwrap_reference< System >::type &sys = system; |
| m_resizer.adjust_size( in , detail::bind( &internal_stepper_base_type::template resize_impl<StateIn> , detail::ref( *this ) , detail::_1 ) ); |
| sys( in , m_dxdt.m_v ,t ); |
| this->stepper().do_step_impl( system , in , m_dxdt.m_v , t , out , dt , xerr ); |
| } |
| |
| |
| /* |
| * Version 8 : do_step( sys , in , dxdt , t , out , dt , xerr ) |
| * |
| * this version does not solve the forwarding problem, boost.range can not be used |
| */ |
| template< class System , class StateIn , class DerivIn , class StateOut , class Err > |
| void do_step( System system , const StateIn &in , const DerivIn &dxdt , time_type t , StateOut &out , time_type dt , Err &xerr ) |
| { |
| this->stepper().do_step_impl( system , in , dxdt , t , out , dt , xerr ); |
| } |
| |
| template< class StateIn > |
| void adjust_size( const StateIn &x ) |
| { |
| resize_impl( x ); |
| } |
| |
| |
| |
| private: |
| |
| template< class System , class StateInOut > |
| void do_step_v1( System system , StateInOut &x , time_type t , time_type dt ) |
| { |
| typename odeint::unwrap_reference< System >::type &sys = system; |
| m_resizer.adjust_size( x , detail::bind( &internal_stepper_base_type::template resize_impl<StateInOut> , detail::ref( *this ) , detail::_1 ) ); |
| sys( x , m_dxdt.m_v , t ); |
| this->stepper().do_step_impl( system , x , m_dxdt.m_v , t , x , dt ); |
| } |
| |
| template< class System , class StateInOut , class Err > |
| void do_step_v5( System system , StateInOut &x , time_type t , time_type dt , Err &xerr ) |
| { |
| typename odeint::unwrap_reference< System >::type &sys = system; |
| m_resizer.adjust_size( x , detail::bind( &internal_stepper_base_type::template resize_impl<StateInOut> , detail::ref( *this ) , detail::_1 ) ); |
| sys( x , m_dxdt.m_v ,t ); |
| this->stepper().do_step_impl( system , x , m_dxdt.m_v , t , x , dt , xerr ); |
| } |
| |
| template< class StateIn > |
| bool resize_impl( const StateIn &x ) |
| { |
| return adjust_size_by_resizeability( m_dxdt , x , typename is_resizeable<deriv_type>::type() ); |
| } |
| |
| stepper_type& stepper( void ) |
| { |
| return *static_cast< stepper_type* >( this ); |
| } |
| |
| const stepper_type& stepper( void ) const |
| { |
| return *static_cast< const stepper_type* >( this ); |
| } |
| |
| |
| resizer_type m_resizer; |
| |
| protected: |
| |
| wrapped_deriv_type m_dxdt; |
| }; |
| |
| |
| |
| |
| /******** DOXYGEN *******/ |
| |
| /** |
| * \class explicit_error_stepper_base |
| * \brief Base class for explicit steppers with error estimation. This class can used with |
| * controlled steppers for step size control. |
| * |
| * This class serves as the base class for all explicit steppers with algebra and operations. In contrast to |
| * explicit_stepper_base it also estimates the error and can be used in a controlled stepper to provide |
| * step size control. |
| * |
| * \note This stepper provides `do_step` methods with and without error estimation. It has therefore three orders, |
| * one for the order of a step if the error is not estimated. The other two orders are the orders of the step and |
| * the error step if the error estimation is performed. |
| * |
| * explicit_error_stepper_base is used as the interface in a CRTP (currently recurring template |
| * pattern). In order to work correctly the parent class needs to have a method |
| * `do_step_impl( system , in , dxdt_in , t , out , dt , xerr )`. |
| * explicit_error_stepper_base derives from algebra_stepper_base. |
| * |
| * explicit_error_stepper_base provides several overloaded `do_step` methods, see the list below. Only two of them |
| * are needed to fulfill the Error Stepper concept. The other ones are for convenience and for performance. Some |
| * of them simply update the state out-of-place, while other expect that the first derivative at `t` is passed to the |
| * stepper. |
| * |
| * - `do_step( sys , x , t , dt )` - The classical `do_step` method needed to fulfill the Error Stepper concept. The |
| * state is updated in-place. A type modelling a Boost.Range can be used for x. |
| * - `do_step( sys , x , dxdt , t , dt )` - This method updates the state in-place, but the derivative at the point `t` |
| * must be explicitly passed in `dxdt`. |
| * - `do_step( sys , in , t , out , dt )` - This method updates the state out-of-place, hence the result of the step |
| * is stored in `out`. |
| * - `do_step( sys , in , dxdt , t , out , dt )` - This method update the state out-of-place and expects that the |
| * derivative at the point `t` is explicitly passed in `dxdt`. It is a combination of the two `do_step` methods |
| * above. |
| * - `do_step( sys , x , t , dt , xerr )` - This `do_step` method is needed to fulfill the Error Stepper concept. The |
| * state is updated in-place and an error estimate is calculated. A type modelling a Boost.Range can be used for x. |
| * - `do_step( sys , x , dxdt , t , dt , xerr )` - This method updates the state in-place, but the derivative at the |
| * point `t` must be passed in `dxdt`. An error estimate is calculated. |
| * - `do_step( sys , in , t , out , dt , xerr )` - This method updates the state out-of-place and estimates the error |
| * during the step. |
| * - `do_step( sys , in , dxdt , t , out , dt , xerr )` - This methods updates the state out-of-place and estimates |
| * the error during the step. Furthermore, the derivative at `t` must be passed in `dxdt`. |
| * |
| * \note The system is always passed as value, which might result in poor performance if it contains data. In this |
| * case it can be used with `boost::ref` or `std::ref`, for example `stepper.do_step( boost::ref( sys ) , x , t , dt );` |
| * |
| * \note The time `t` is not advanced by the stepper. This has to done manually, or by the appropriate `integrate` |
| * routines or `iterator`s. |
| * |
| * \tparam Stepper The stepper on which this class should work. It is used via CRTP, hence explicit_stepper_base |
| * provides the interface for the Stepper. |
| * \tparam Order The order of a stepper if the stepper is used without error estimation. |
| * \tparam StepperOrder The order of a step if the stepper is used with error estimation. Usually Order and StepperOrder have |
| * the same value. |
| * \tparam ErrorOrder The order of the error step if the stepper is used with error estimation. |
| * \tparam State The state type for the stepper. |
| * \tparam Value The value type for the stepper. This should be a floating point type, like float, |
| * double, or a multiprecision type. It must not necessary be the value_type of the State. For example |
| * the State can be a `vector< complex< double > >` in this case the Value must be double. |
| * The default value is double. |
| * \tparam Deriv The type representing time derivatives of the state type. It is usually the same type as the |
| * state type, only if used with Boost.Units both types differ. |
| * \tparam Time The type representing the time. Usually the same type as the value type. When Boost.Units is |
| * used, this type has usually a unit. |
| * \tparam Algebra The algebra type which must fulfill the Algebra Concept. |
| * \tparam Operations The type for the operations which must fulfill the Operations Concept. |
| * \tparam Resizer The resizer policy class. |
| */ |
| |
| |
| /** |
| * \fn explicit_error_stepper_base::explicit_error_stepper_base( const algebra_type &algebra = algebra_type() ) |
| * |
| * \brief Constructs a explicit_error_stepper_base class. This constructor can be used as a default |
| * constructor if the algebra has a default constructor. |
| * \param algebra A copy of algebra is made and stored inside explicit_stepper_base. |
| */ |
| |
| /** |
| * \fn explicit_error_stepper_base::order( void ) const |
| * \return Returns the order of the stepper if it used without error estimation. |
| */ |
| |
| /** |
| * \fn explicit_error_stepper_base::stepper_order( void ) const |
| * \return Returns the order of a step if the stepper is used without error estimation. |
| */ |
| |
| /** |
| * \fn explicit_error_stepper_base::error_order( void ) const |
| * \return Returns the order of an error step if the stepper is used without error estimation. |
| */ |
| |
| /** |
| * \fn explicit_error_stepper_base::do_step( System system , StateInOut &x , time_type t , time_type dt ) |
| * \brief This method performs one step. It transforms the result in-place. |
| * |
| * \param system The system function to solve, hence the r.h.s. of the ordinary differential equation. It must fulfill the |
| * Simple System concept. |
| * \param x The state of the ODE which should be solved. After calling do_step the result is updated in x. |
| * \param t The value of the time, at which the step should be performed. |
| * \param dt The step size. |
| */ |
| |
| /** |
| * \fn explicit_error_stepper_base::do_step( System system , StateInOut &x , const DerivIn &dxdt , time_type t , time_type dt ) |
| * \brief The method performs one step with the stepper passed by Stepper. Additionally to the other method |
| * the derivative of x is also passed to this method. It is supposed to be used in the following way: |
| * |
| * \code |
| * sys( x , dxdt , t ); |
| * stepper.do_step( sys , x , dxdt , t , dt ); |
| * \endcode |
| * |
| * The result is updated in place in x. This method is disabled if Time and Deriv are of the same type. In this |
| * case the method could not be distinguished from other `do_step` versions. |
| * |
| * \note This method does not solve the forwarding problem. |
| * |
| * \param system The system function to solve, hence the r.h.s. of the ODE. It must fulfill the |
| * Simple System concept. |
| * \param x The state of the ODE which should be solved. After calling do_step the result is updated in x. |
| * \param dxdt The derivative of x at t. |
| * \param t The value of the time, at which the step should be performed. |
| * \param dt The step size. |
| */ |
| |
| /** |
| * \fn explicit_error_stepper_base::do_step( System system , const StateIn &in , time_type t , StateOut &out , time_type dt ) |
| * \brief The method performs one step with the stepper passed by Stepper. The state of the ODE is updated out-of-place. |
| * This method is disabled if StateIn and Time are the same type. In this case the method can not be distinguished from |
| * other `do_step` variants. |
| * \note This method does not solve the forwarding problem. |
| * |
| * \param system The system function to solve, hence the r.h.s. of the ODE. It must fulfill the |
| * Simple System concept. |
| * \param in The state of the ODE which should be solved. in is not modified in this method |
| * \param t The value of the time, at which the step should be performed. |
| * \param out The result of the step is written in out. |
| * \param dt The step size. |
| */ |
| |
| |
| /** |
| * \fn explicit_error_stepper_base::do_step( System system , const StateIn &in , const DerivIn &dxdt , time_type t , StateOut &out , time_type dt ) |
| * \brief The method performs one step with the stepper passed by Stepper. The state of the ODE is updated out-of-place. |
| * Furthermore, the derivative of x at t is passed to the stepper. It is supposed to be used in the following way: |
| * |
| * \code |
| * sys( in , dxdt , t ); |
| * stepper.do_step( sys , in , dxdt , t , out , dt ); |
| * \endcode |
| * |
| * This method is disabled if DerivIn and Time are of same type. |
| * |
| * \note This method does not solve the forwarding problem. |
| * |
| * \param system The system function to solve, hence the r.h.s. of the ODE. It must fulfill the |
| * Simple System concept. |
| * \param in The state of the ODE which should be solved. in is not modified in this method |
| * \param dxdt The derivative of x at t. |
| * \param t The value of the time, at which the step should be performed. |
| * \param out The result of the step is written in out. |
| * \param dt The step size. |
| */ |
| |
| /** |
| * \fn explicit_error_stepper_base::do_step( System system , StateInOut &x , time_type t , time_type dt , Err &xerr ) |
| * \brief The method performs one step with the stepper passed by Stepper and estimates the error. The state of the ODE |
| * is updated in-place. |
| * |
| * \param system The system function to solve, hence the r.h.s. of the ODE. It must fulfill the |
| * Simple System concept. |
| * \param x The state of the ODE which should be solved. x is updated by this method. |
| * \param t The value of the time, at which the step should be performed. |
| * \param dt The step size. |
| * \param xerr The estimation of the error is stored in xerr. |
| */ |
| |
| /** |
| * \fn explicit_error_stepper_base::do_step( System system , StateInOut &x , const DerivIn &dxdt , time_type t , time_type dt , Err &xerr ) |
| * \brief The method performs one step with the stepper passed by Stepper. Additionally to the other method |
| * the derivative of x is also passed to this method. It is supposed to be used in the following way: |
| * |
| * \code |
| * sys( x , dxdt , t ); |
| * stepper.do_step( sys , x , dxdt , t , dt , xerr ); |
| * \endcode |
| * |
| * The result is updated in place in x. This method is disabled if Time and DerivIn are of the same type. In this |
| * case the method could not be distinguished from other `do_step` versions. |
| * |
| * \note This method does not solve the forwarding problem. |
| * |
| * \param system The system function to solve, hence the r.h.s. of the ODE. It must fulfill the |
| * Simple System concept. |
| * \param x The state of the ODE which should be solved. After calling do_step the result is updated in x. |
| * \param dxdt The derivative of x at t. |
| * \param t The value of the time, at which the step should be performed. |
| * \param dt The step size. |
| * \param xerr The error estimate is stored in xerr. |
| */ |
| |
| /** |
| * \fn explicit_error_stepper_base::do_step( System system , const StateIn &in , time_type t , StateOut &out , time_type dt , Err &xerr ) |
| * \brief The method performs one step with the stepper passed by Stepper. The state of the ODE is updated out-of-place. |
| * Furthermore, the error is estimated. |
| * |
| * \note This method does not solve the forwarding problem. |
| * |
| * \param system The system function to solve, hence the r.h.s. of the ODE. It must fulfill the |
| * Simple System concept. |
| * \param in The state of the ODE which should be solved. in is not modified in this method |
| * \param t The value of the time, at which the step should be performed. |
| * \param out The result of the step is written in out. |
| * \param dt The step size. |
| * \param xerr The error estimate. |
| */ |
| |
| |
| /** |
| * \fn explicit_error_stepper_base::do_step( System system , const StateIn &in , const DerivIn &dxdt , time_type t , StateOut &out , time_type dt , Err &xerr ) |
| * \brief The method performs one step with the stepper passed by Stepper. The state of the ODE is updated out-of-place. |
| * Furthermore, the derivative of x at t is passed to the stepper and the error is estimated. It is supposed to be used in the following way: |
| * |
| * \code |
| * sys( in , dxdt , t ); |
| * stepper.do_step( sys , in , dxdt , t , out , dt ); |
| * \endcode |
| * |
| * This method is disabled if DerivIn and Time are of same type. |
| * |
| * \note This method does not solve the forwarding problem. |
| * |
| * \param system The system function to solve, hence the r.h.s. of the ODE. It must fulfill the |
| * Simple System concept. |
| * \param in The state of the ODE which should be solved. in is not modified in this method |
| * \param dxdt The derivative of x at t. |
| * \param t The value of the time, at which the step should be performed. |
| * \param out The result of the step is written in out. |
| * \param dt The step size. |
| * \param xerr The error estimate. |
| */ |
| |
| |
| /** |
| * \fn explicit_error_stepper_base::adjust_size( const StateIn &x ) |
| * \brief Adjust the size of all temporaries in the stepper manually. |
| * \param x A state from which the size of the temporaries to be resized is deduced. |
| */ |
| |
| } // odeint |
| } // numeric |
| } // boost |
| |
| #endif // BOOST_NUMERIC_ODEINT_STEPPER_BASE_EXPLICIT_ERROR_STEPPER_BASE_HPP_INCLUDED |