| /****************************************************************************** |
| * |
| * Copyright (C) 1999-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| #ifndef BTM_BLE_INT_TYPES_H |
| #define BTM_BLE_INT_TYPES_H |
| |
| #include "osi/include/alarm.h" |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* scanning enable status */ |
| #define BTM_BLE_SCAN_ENABLE 0x01 |
| #define BTM_BLE_SCAN_DISABLE 0x00 |
| |
| /* advertising enable status */ |
| #define BTM_BLE_ADV_ENABLE 0x01 |
| #define BTM_BLE_ADV_DISABLE 0x00 |
| |
| /* use the high 4 bits unused by inquiry mode */ |
| #define BTM_BLE_SELECT_SCAN 0x20 |
| #define BTM_BLE_NAME_REQUEST 0x40 |
| #define BTM_BLE_OBSERVE 0x80 |
| |
| #define BTM_BLE_MAX_WL_ENTRY 1 |
| #define BTM_BLE_AD_DATA_LEN 31 |
| |
| #define BTM_BLE_ENC_MASK 0x03 |
| |
| #define BTM_BLE_DUPLICATE_ENABLE 1 |
| #define BTM_BLE_DUPLICATE_DISABLE 0 |
| |
| #define BTM_BLE_GAP_DISC_SCAN_INT 18 /* Interval(scan_int) = 11.25 ms= 0x0010 * 0.625 ms */ |
| #define BTM_BLE_GAP_DISC_SCAN_WIN 18 /* scan_window = 11.25 ms= 0x0010 * 0.625 ms */ |
| #define BTM_BLE_GAP_ADV_INT 512 /* Tgap(gen_disc) = 1.28 s= 512 * 0.625 ms */ |
| #define BTM_BLE_GAP_LIM_TIMEOUT_MS (180 * 1000) /* Tgap(lim_timeout) = 180s max */ |
| #define BTM_BLE_LOW_LATENCY_SCAN_INT 8000 /* Interval(scan_int) = 5s= 8000 * 0.625 ms */ |
| #define BTM_BLE_LOW_LATENCY_SCAN_WIN 8000 /* scan_window = 5s= 8000 * 0.625 ms */ |
| |
| |
| #define BTM_BLE_GAP_ADV_FAST_INT_1 48 /* TGAP(adv_fast_interval1) = 30(used) ~ 60 ms = 48 *0.625 */ |
| #define BTM_BLE_GAP_ADV_FAST_INT_2 160 /* TGAP(adv_fast_interval2) = 100(used) ~ 150 ms = 160 * 0.625 ms */ |
| #define BTM_BLE_GAP_ADV_SLOW_INT 2048 /* Tgap(adv_slow_interval) = 1.28 s= 512 * 0.625 ms */ |
| #define BTM_BLE_GAP_ADV_DIR_MAX_INT 800 /* Tgap(dir_conn_adv_int_max) = 500 ms = 800 * 0.625 ms */ |
| #define BTM_BLE_GAP_ADV_DIR_MIN_INT 400 /* Tgap(dir_conn_adv_int_min) = 250 ms = 400 * 0.625 ms */ |
| |
| #define BTM_BLE_GAP_FAST_ADV_TIMEOUT_MS (30 * 1000) |
| |
| #define BTM_BLE_SEC_REQ_ACT_NONE 0 |
| #define BTM_BLE_SEC_REQ_ACT_ENCRYPT 1 /* encrypt the link using current key or key refresh */ |
| #define BTM_BLE_SEC_REQ_ACT_PAIR 2 |
| #define BTM_BLE_SEC_REQ_ACT_DISCARD 3 /* discard the sec request while encryption is started but not completed */ |
| typedef uint8_t tBTM_BLE_SEC_REQ_ACT; |
| |
| #define BLE_STATIC_PRIVATE_MSB_MASK 0x3f |
| #define BLE_RESOLVE_ADDR_MSB 0x40 /* most significant bit, bit7, bit6 is 01 to be resolvable random */ |
| #define BLE_RESOLVE_ADDR_MASK 0xc0 /* bit 6, and bit7 */ |
| #define BTM_BLE_IS_RESOLVE_BDA(x) (((x)[0] & BLE_RESOLVE_ADDR_MASK) == BLE_RESOLVE_ADDR_MSB) |
| |
| #define BLE_PUBLIC_ADDR_MSB_MASK 0xC0 |
| #define BLE_PUBLIC_ADDR_MSB 0x80 /* most significant bit, bit7, bit6 is 10 to be public address*/ |
| #define BTM_IS_PUBLIC_BDA(x) (((x)[0] & BLE_PUBLIC_ADDR_MSB_MASK) == BLE_PUBLIC_ADDR_MSB) |
| |
| /* LE scan activity bit mask, continue with LE inquiry bits */ |
| #define BTM_LE_SELECT_CONN_ACTIVE 0x40 /* selection connection is in progress */ |
| #define BTM_LE_OBSERVE_ACTIVE 0x80 /* observe is in progress */ |
| |
| /* BLE scan activity mask checking */ |
| #define BTM_BLE_IS_SCAN_ACTIVE(x) ((x) & BTM_BLE_SCAN_ACTIVE_MASK) |
| #define BTM_BLE_IS_INQ_ACTIVE(x) ((x) & BTM_BLE_INQUIRY_MASK) |
| #define BTM_BLE_IS_OBS_ACTIVE(x) ((x) & BTM_LE_OBSERVE_ACTIVE) |
| #define BTM_BLE_IS_SEL_CONN_ACTIVE(x) ((x) & BTM_LE_SELECT_CONN_ACTIVE) |
| |
| /* BLE ADDR type ID bit */ |
| #define BLE_ADDR_TYPE_ID_BIT 0x02 |
| |
| #define BTM_VSC_CHIP_CAPABILITY_L_VERSION 55 |
| #define BTM_VSC_CHIP_CAPABILITY_M_VERSION 95 |
| |
| typedef struct |
| { |
| uint16_t data_mask; |
| uint8_t *p_flags; |
| uint8_t ad_data[BTM_BLE_AD_DATA_LEN]; |
| uint8_t *p_pad; |
| }tBTM_BLE_LOCAL_ADV_DATA; |
| |
| typedef struct |
| { |
| uint32_t inq_count; /* Used for determining if a response has already been */ |
| /* received for the current inquiry operation. (We do not */ |
| /* want to flood the caller with multiple responses from */ |
| /* the same device. */ |
| bool scan_rsp; |
| tBLE_BD_ADDR le_bda; |
| } tINQ_LE_BDADDR; |
| |
| #define BTM_BLE_ADV_DATA_LEN_MAX 31 |
| #define BTM_BLE_CACHE_ADV_DATA_MAX 62 |
| |
| #define BTM_BLE_ISVALID_PARAM(x, min, max) (((x) >= (min) && (x) <= (max)) || ((x) == BTM_BLE_CONN_PARAM_UNDEF)) |
| |
| /* 15 minutes minimum for random address refreshing */ |
| #define BTM_BLE_PRIVATE_ADDR_INT_MS (15 * 60 * 1000) |
| |
| typedef struct |
| { |
| uint16_t discoverable_mode; |
| uint16_t connectable_mode; |
| uint32_t scan_window; |
| uint32_t scan_interval; |
| uint8_t scan_type; /* current scan type: active or passive */ |
| uint8_t scan_duplicate_filter; /* duplicate filter enabled for scan */ |
| uint16_t adv_interval_min; |
| uint16_t adv_interval_max; |
| tBTM_BLE_AFP afp; /* advertising filter policy */ |
| tBTM_BLE_SFP sfp; /* scanning filter policy */ |
| |
| tBLE_ADDR_TYPE adv_addr_type; |
| uint8_t evt_type; |
| uint8_t adv_mode; |
| tBLE_BD_ADDR direct_bda; |
| tBTM_BLE_EVT directed_conn; |
| bool fast_adv_on; |
| alarm_t *fast_adv_timer; |
| |
| uint8_t adv_len; |
| uint8_t adv_data_cache[BTM_BLE_CACHE_ADV_DATA_MAX]; |
| |
| /* inquiry BD addr database */ |
| uint8_t num_bd_entries; |
| uint8_t max_bd_entries; |
| tBTM_BLE_LOCAL_ADV_DATA adv_data; |
| tBTM_BLE_ADV_CHNL_MAP adv_chnl_map; |
| |
| alarm_t *inquiry_timer; |
| bool scan_rsp; |
| uint8_t state; /* Current state that the inquiry process is in */ |
| int8_t tx_power; |
| } tBTM_BLE_INQ_CB; |
| |
| |
| /* random address resolving complete callback */ |
| typedef void (tBTM_BLE_RESOLVE_CBACK) (void * match_rec, void *p); |
| |
| typedef void (tBTM_BLE_ADDR_CBACK) (BD_ADDR_PTR static_random, void *p); |
| |
| /* random address management control block */ |
| typedef struct |
| { |
| tBLE_ADDR_TYPE own_addr_type; /* local device LE address type */ |
| BD_ADDR private_addr; |
| BD_ADDR random_bda; |
| bool busy; |
| tBTM_BLE_ADDR_CBACK *p_generate_cback; |
| void *p; |
| alarm_t *refresh_raddr_timer; |
| } tBTM_LE_RANDOM_CB; |
| |
| #define BTM_BLE_MAX_BG_CONN_DEV_NUM 10 |
| |
| typedef struct |
| { |
| uint16_t min_conn_int; |
| uint16_t max_conn_int; |
| uint16_t slave_latency; |
| uint16_t supervision_tout; |
| |
| }tBTM_LE_CONN_PRAMS; |
| |
| |
| typedef struct |
| { |
| BD_ADDR bd_addr; |
| uint8_t attr; |
| bool is_connected; |
| bool in_use; |
| }tBTM_LE_BG_CONN_DEV; |
| |
| /* white list using state as a bit mask */ |
| #define BTM_BLE_WL_IDLE 0 |
| #define BTM_BLE_WL_INIT 1 |
| #define BTM_BLE_WL_SCAN 2 |
| #define BTM_BLE_WL_ADV 4 |
| typedef uint8_t tBTM_BLE_WL_STATE; |
| |
| /* resolving list using state as a bit mask */ |
| #define BTM_BLE_RL_IDLE 0 |
| #define BTM_BLE_RL_INIT 1 |
| #define BTM_BLE_RL_SCAN 2 |
| #define BTM_BLE_RL_ADV 4 |
| typedef uint8_t tBTM_BLE_RL_STATE; |
| |
| /* BLE connection state */ |
| #define BLE_CONN_IDLE 0 |
| #define BLE_DIR_CONN 1 |
| #define BLE_BG_CONN 2 |
| #define BLE_CONN_CANCEL 3 |
| typedef uint8_t tBTM_BLE_CONN_ST; |
| |
| typedef struct |
| { |
| void *p_param; |
| }tBTM_BLE_CONN_REQ; |
| |
| /* LE state request */ |
| #define BTM_BLE_STATE_INVALID 0 |
| #define BTM_BLE_STATE_CONN_ADV 1 |
| #define BTM_BLE_STATE_INIT 2 |
| #define BTM_BLE_STATE_MASTER 3 |
| #define BTM_BLE_STATE_SLAVE 4 |
| #define BTM_BLE_STATE_LO_DUTY_DIR_ADV 5 |
| #define BTM_BLE_STATE_HI_DUTY_DIR_ADV 6 |
| #define BTM_BLE_STATE_NON_CONN_ADV 7 |
| #define BTM_BLE_STATE_PASSIVE_SCAN 8 |
| #define BTM_BLE_STATE_ACTIVE_SCAN 9 |
| #define BTM_BLE_STATE_SCAN_ADV 10 |
| #define BTM_BLE_STATE_MAX 11 |
| typedef uint8_t tBTM_BLE_STATE; |
| |
| #define BTM_BLE_STATE_CONN_ADV_BIT 0x0001 |
| #define BTM_BLE_STATE_INIT_BIT 0x0002 |
| #define BTM_BLE_STATE_MASTER_BIT 0x0004 |
| #define BTM_BLE_STATE_SLAVE_BIT 0x0008 |
| #define BTM_BLE_STATE_LO_DUTY_DIR_ADV_BIT 0x0010 |
| #define BTM_BLE_STATE_HI_DUTY_DIR_ADV_BIT 0x0020 |
| #define BTM_BLE_STATE_NON_CONN_ADV_BIT 0x0040 |
| #define BTM_BLE_STATE_PASSIVE_SCAN_BIT 0x0080 |
| #define BTM_BLE_STATE_ACTIVE_SCAN_BIT 0x0100 |
| #define BTM_BLE_STATE_SCAN_ADV_BIT 0x0200 |
| typedef uint16_t tBTM_BLE_STATE_MASK; |
| |
| #define BTM_BLE_STATE_ALL_MASK 0x03ff |
| #define BTM_BLE_STATE_ALL_ADV_MASK (BTM_BLE_STATE_CONN_ADV_BIT|BTM_BLE_STATE_LO_DUTY_DIR_ADV_BIT|BTM_BLE_STATE_HI_DUTY_DIR_ADV_BIT|BTM_BLE_STATE_SCAN_ADV_BIT) |
| #define BTM_BLE_STATE_ALL_SCAN_MASK (BTM_BLE_STATE_PASSIVE_SCAN_BIT|BTM_BLE_STATE_ACTIVE_SCAN_BIT) |
| #define BTM_BLE_STATE_ALL_CONN_MASK (BTM_BLE_STATE_MASTER_BIT|BTM_BLE_STATE_SLAVE_BIT) |
| |
| #ifndef BTM_LE_RESOLVING_LIST_MAX |
| #define BTM_LE_RESOLVING_LIST_MAX 0x20 |
| #endif |
| |
| typedef struct |
| { |
| BD_ADDR *resolve_q_random_pseudo; |
| uint8_t *resolve_q_action; |
| uint8_t q_next; |
| uint8_t q_pending; |
| } tBTM_BLE_RESOLVE_Q; |
| |
| typedef struct |
| { |
| bool in_use; |
| bool to_add; |
| BD_ADDR bd_addr; |
| uint8_t attr; |
| }tBTM_BLE_WL_OP; |
| |
| /* BLE privacy mode */ |
| #define BTM_PRIVACY_NONE 0 /* BLE no privacy */ |
| #define BTM_PRIVACY_1_1 1 /* BLE privacy 1.1, do not support privacy 1.0 */ |
| #define BTM_PRIVACY_1_2 2 /* BLE privacy 1.2 */ |
| #define BTM_PRIVACY_MIXED 3 /* BLE privacy mixed mode, broadcom propietary mode */ |
| typedef uint8_t tBTM_PRIVACY_MODE; |
| |
| /* data length change event callback */ |
| typedef void (tBTM_DATA_LENGTH_CHANGE_CBACK) (uint16_t max_tx_length, uint16_t max_rx_length); |
| |
| /* Define BLE Device Management control structure |
| */ |
| typedef struct |
| { |
| uint8_t scan_activity; /* LE scan activity mask */ |
| |
| /***************************************************** |
| ** BLE Inquiry |
| *****************************************************/ |
| tBTM_BLE_INQ_CB inq_var; |
| |
| /* observer callback and timer */ |
| tBTM_INQ_RESULTS_CB *p_obs_results_cb; |
| tBTM_CMPL_CB *p_obs_cmpl_cb; |
| alarm_t *observer_timer; |
| |
| /* background connection procedure cb value */ |
| tBTM_BLE_CONN_TYPE bg_conn_type; |
| uint32_t scan_int; |
| uint32_t scan_win; |
| tBTM_BLE_SEL_CBACK *p_select_cback; |
| |
| /* white list information */ |
| uint8_t white_list_avail_size; |
| tBTM_BLE_WL_STATE wl_state; |
| |
| fixed_queue_t *conn_pending_q; |
| tBTM_BLE_CONN_ST conn_state; |
| |
| /* random address management control block */ |
| tBTM_LE_RANDOM_CB addr_mgnt_cb; |
| |
| bool enabled; |
| |
| #if (BLE_PRIVACY_SPT == TRUE) |
| bool mixed_mode; /* privacy 1.2 mixed mode is on or not */ |
| tBTM_PRIVACY_MODE privacy_mode; /* privacy mode */ |
| uint8_t resolving_list_avail_size; /* resolving list available size */ |
| tBTM_BLE_RESOLVE_Q resolving_list_pend_q; /* Resolving list queue */ |
| tBTM_BLE_RL_STATE suspended_rl_state; /* Suspended resolving list state */ |
| uint8_t *irk_list_mask; /* IRK list availability mask, up to max entry bits */ |
| tBTM_BLE_RL_STATE rl_state; /* Resolving list state */ |
| #endif |
| |
| tBTM_BLE_WL_OP wl_op_q[BTM_BLE_MAX_BG_CONN_DEV_NUM]; |
| |
| /* current BLE link state */ |
| tBTM_BLE_STATE_MASK cur_states; /* bit mask of tBTM_BLE_STATE */ |
| uint8_t link_count[2]; /* total link count master and slave*/ |
| } tBTM_BLE_CB; |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif // BTM_BLE_INT_TYPES_H |