| /****************************************************************************** |
| * |
| * Copyright (C) 2000-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * Interface to A2DP Application Programming Interface |
| * |
| ******************************************************************************/ |
| #ifndef A2DP_API_H |
| #define A2DP_API_H |
| |
| #include <stddef.h> |
| |
| #include "avdt_api.h" |
| #include "osi/include/time.h" |
| #include "sdp_api.h" |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /***************************************************************************** |
| ** constants |
| *****************************************************************************/ |
| |
| // |
| // |MAX_PCM_FRAME_NUM_PER_TICK| controls how many buffers we can hold in |
| // the A2DP buffer queues during temporary link congestion. |
| // |
| #ifndef MAX_PCM_FRAME_NUM_PER_TICK |
| #define MAX_PCM_FRAME_NUM_PER_TICK 14 |
| #endif |
| |
| /* Profile supported features */ |
| #define A2DP_SUPF_PLAYER 0x0001 |
| #define A2DP_SUPF_MIC 0x0002 |
| #define A2DP_SUPF_TUNER 0x0004 |
| #define A2DP_SUPF_MIXER 0x0008 |
| |
| #define A2DP_SUPF_HEADPHONE 0x0001 |
| #define A2DP_SUPF_SPEAKER 0x0002 |
| #define A2DP_SUPF_RECORDER 0x0004 |
| #define A2DP_SUPF_AMP 0x0008 |
| |
| /* AV Media Codec Type (Audio Codec ID) */ |
| #define A2DP_MEDIA_CT_SBC 0x00 /* SBC media codec type */ |
| #define A2DP_MEDIA_CT_NON_A2DP \ |
| 0xFF /* Non-A2DP media codec type (vendor-specific codec) */ |
| |
| typedef uint8_t tA2DP_CODEC_TYPE; /* A2DP Codec type: A2DP_MEDIA_CT_* */ |
| |
| #define A2DP_SUCCESS 0 /* Success */ |
| #define A2DP_FAIL 0x0A /* Failed */ |
| #define A2DP_BUSY 0x0B /* A2DP_FindService is already in progress */ |
| #define A2DP_INVALID_PARAMS 0x0C /* bad parameters */ |
| #define A2DP_WRONG_CODEC 0x0D /* wrong codec info */ |
| #define A2DP_BAD_CODEC_TYPE 0xC1 /* Media Codec Type is not valid */ |
| #define A2DP_NS_CODEC_TYPE 0xC2 /* Media Codec Type is not supported */ |
| #define A2DP_BAD_SAMP_FREQ \ |
| 0xC3 /* Sampling Frequency is not valid or multiple values have been \ |
| selected */ |
| #define A2DP_NS_SAMP_FREQ 0xC4 /* Sampling Frequency is not supported */ |
| #define A2DP_BAD_CH_MODE \ |
| 0xC5 /* Channel Mode is not valid or multiple values have been selected */ |
| #define A2DP_NS_CH_MODE 0xC6 /* Channel Mode is not supported */ |
| #define A2DP_BAD_SUBBANDS \ |
| 0xC7 /* None or multiple values have been selected for Number of Subbands */ |
| #define A2DP_NS_SUBBANDS 0xC8 /* Number of Subbands is not supported */ |
| #define A2DP_BAD_ALLOC_METHOD \ |
| 0xC9 /* None or multiple values have been selected for Allocation Method */ |
| #define A2DP_NS_ALLOC_METHOD 0xCA /* Allocation Method is not supported */ |
| #define A2DP_BAD_MIN_BITPOOL 0xCB /* Minimum Bitpool Value is not valid */ |
| #define A2DP_NS_MIN_BITPOOL 0xCC /* Minimum Bitpool Value is not supported */ |
| #define A2DP_BAD_MAX_BITPOOL 0xCD /* Maximum Bitpool Value is not valid */ |
| #define A2DP_NS_MAX_BITPOOL 0xCE /* Maximum Bitpool Value is not supported */ |
| #define A2DP_BAD_LAYER \ |
| 0xCF /* None or multiple values have been selected for Layer */ |
| #define A2DP_NS_LAYER 0xD0 /* Layer is not supported */ |
| #define A2DP_NS_CRC 0xD1 /* CRC is not supported */ |
| #define A2DP_NS_MPF 0xD2 /* MPF-2 is not supported */ |
| #define A2DP_NS_VBR 0xD3 /* VBR is not supported */ |
| #define A2DP_BAD_BIT_RATE \ |
| 0xD4 /* None or multiple values have been selected for Bit Rate */ |
| #define A2DP_NS_BIT_RATE 0xD5 /* Bit Rate is not supported */ |
| #define A2DP_BAD_OBJ_TYPE \ |
| 0xD6 /* Either 1) Object type is not valid (b3-b0) or 2) None or multiple \ |
| values have been selected for Object Type */ |
| #define A2DP_NS_OBJ_TYPE 0xD7 /* Object type is not supported */ |
| #define A2DP_BAD_CHANNEL \ |
| 0xD8 /* None or multiple values have been selected for Channels */ |
| #define A2DP_NS_CHANNEL 0xD9 /* Channels is not supported */ |
| #define A2DP_BAD_BLOCK_LEN \ |
| 0xDD /* None or multiple values have been selected for Block Length */ |
| #define A2DP_BAD_CP_TYPE 0xE0 /* The requested CP Type is not supported. */ |
| #define A2DP_BAD_CP_FORMAT \ |
| 0xE1 /* The format of Content Protection Service Capability/Content \ |
| Protection Scheme Dependent Data is not correct. */ |
| |
| typedef uint8_t tA2DP_STATUS; |
| |
| /* the return values from A2DP_BitsSet() */ |
| #define A2DP_SET_ONE_BIT 1 /* one and only one bit is set */ |
| #define A2DP_SET_ZERO_BIT 0 /* all bits clear */ |
| #define A2DP_SET_MULTL_BIT 2 /* multiple bits are set */ |
| |
| /***************************************************************************** |
| ** type definitions |
| *****************************************************************************/ |
| |
| /* This data type is used in A2DP_FindService() to initialize the SDP database |
| * to hold the result service search. */ |
| typedef struct { |
| uint32_t db_len; /* Length, in bytes, of the discovery database */ |
| uint16_t num_attr; /* The number of attributes in p_attrs */ |
| uint16_t* p_attrs; /* The attributes filter. If NULL, A2DP API sets the |
| * attribute filter |
| * to be ATTR_ID_SERVICE_CLASS_ID_LIST, |
| * ATTR_ID_BT_PROFILE_DESC_LIST, |
| * ATTR_ID_SUPPORTED_FEATURES, ATTR_ID_SERVICE_NAME and |
| * ATTR_ID_PROVIDER_NAME. |
| * If not NULL, the input is taken as the filter. */ |
| } tA2DP_SDP_DB_PARAMS; |
| |
| /* This data type is used in tA2DP_FIND_CBACK to report the result of the SDP |
| * discovery process. */ |
| typedef struct { |
| uint16_t service_len; /* Length, in bytes, of the service name */ |
| uint16_t provider_len; /* Length, in bytes, of the provider name */ |
| char* p_service_name; /* Pointer the service name. This character string may |
| * not be null terminated. |
| * Use the service_len parameter to safely copy this |
| * string */ |
| char* p_provider_name; /* Pointer the provider name. This character string |
| * may not be null terminated. |
| * Use the provider_len parameter to safely copy this |
| * string */ |
| uint16_t features; /* Profile supported features */ |
| uint16_t avdt_version; /* AVDTP protocol version */ |
| } tA2DP_Service; |
| |
| /* This is the callback to notify the result of the SDP discovery process. */ |
| typedef void(tA2DP_FIND_CBACK)(bool found, tA2DP_Service* p_service); |
| |
| /* |
| * Enum values for each supported codec per SEP. |
| * There should be a separate entry for each codec that is supported |
| * for encoding (SRC), and for decoding purpose (SINK). |
| */ |
| typedef enum { |
| A2DP_CODEC_SEP_INDEX_SOURCE_MIN = 0, |
| A2DP_CODEC_SEP_INDEX_SOURCE_SBC = 0, |
| /* Add an entry for each new source codec here */ |
| A2DP_CODEC_SEP_INDEX_SOURCE_MAX, |
| |
| A2DP_CODEC_SEP_INDEX_SINK_MIN = A2DP_CODEC_SEP_INDEX_SOURCE_MAX, |
| A2DP_CODEC_SEP_INDEX_SINK_SBC = A2DP_CODEC_SEP_INDEX_SINK_MIN, |
| /* Add an entry for each new sink codec here */ |
| A2DP_CODEC_SEP_INDEX_SINK_MAX, |
| |
| A2DP_CODEC_SEP_INDEX_MIN = A2DP_CODEC_SEP_INDEX_SOURCE_MIN, |
| A2DP_CODEC_SEP_INDEX_MAX = A2DP_CODEC_SEP_INDEX_SINK_MAX |
| } tA2DP_CODEC_SEP_INDEX; |
| |
| /** |
| * Structure used to configure the A2DP feeding. |
| */ |
| typedef struct { |
| uint32_t sampling_freq; /* 44100, 48000 etc */ |
| uint8_t num_channel; /* 1 for mono or 2 stereo */ |
| uint8_t bit_per_sample; /* Number of bits per sample (8, 16) */ |
| } tA2DP_FEEDING_PARAMS; |
| |
| /** |
| * Structure used to initialize the A2DP encoder. |
| */ |
| typedef struct { |
| uint32_t SamplingFreq; /* 16k, 32k, 44.1k, 48k, etc. */ |
| uint8_t ChannelMode; /* mono, dual, stereo or joint stereo */ |
| uint8_t NumOfSubBands; /* 4 or 8 */ |
| uint8_t NumOfBlocks; /* 4, 8, 12 or 16 */ |
| uint8_t AllocationMethod; /* loudness or SNR */ |
| uint16_t MtuSize; /* peer mtu size */ |
| } tA2DP_ENCODER_INIT_PARAMS; |
| |
| /** |
| * Structure used to update the A2DP encoder. |
| */ |
| typedef struct { |
| uint16_t MinMtuSize; /* Minimum peer mtu size */ |
| uint8_t MaxBitPool; /* Maximum peer bitpool */ |
| uint8_t MinBitPool; /* Minimum peer bitpool */ |
| } tA2DP_ENCODER_UPDATE_PARAMS; |
| |
| // Prototype for a callback to read audio data for encoding. |
| // |p_buf| is the buffer to store the data. |len| is the number of octets to |
| // read. |
| // Returns the number of octets read. |
| typedef uint32_t (*a2dp_source_read_callback_t)(uint8_t* p_buf, uint32_t len); |
| |
| // Prototype for a callback to enqueue A2DP Source packets for transmission. |
| // |p_buf| is the buffer with the audio data to enqueue. The callback is |
| // responsible for freeing |p_buf|. |
| // |frames_n| is the number of audio frames in |p_buf| - it is used for |
| // statistics purpose. |
| // Returns true if the packet was enqueued, otherwise false. |
| typedef bool (*a2dp_source_enqueue_callback_t)(BT_HDR* p_buf, size_t frames_n); |
| |
| // |
| // A2DP encoder callbacks interface. |
| // |
| typedef struct { |
| // Initialize the A2DP encoder. |
| // If |is_peer_edr| is true, the A2DP peer device supports EDR. |
| // If |peer_supports_3mbps| is true, the A2DP peer device supports 3Mbps |
| // EDR. |
| // The encoder initialization parameters are in |p_init_params|. |
| // |enqueue_callback} is the callback for enqueueing the encoded audio |
| // data. |
| void (*encoder_init)(bool is_peer_edr, bool peer_supports_3mbps, |
| const tA2DP_ENCODER_INIT_PARAMS* p_init_params, |
| a2dp_source_read_callback_t read_callback, |
| a2dp_source_enqueue_callback_t enqueue_callback); |
| |
| // Update the A2DP encoder. |
| // The encoder update parameters are in |p_update_params|. |
| void (*encoder_update)(const tA2DP_ENCODER_UPDATE_PARAMS* p_update_params); |
| |
| // Cleanup the A2DP encoder. |
| void (*encoder_cleanup)(void); |
| |
| // Initialize the feeding for the A2DP encoder. |
| // The feeding initialization parameters are in |p_feeding_params|. |
| void (*feeding_init)(const tA2DP_FEEDING_PARAMS* p_feeding_params); |
| |
| // Reset the feeding for the A2DP encoder. |
| void (*feeding_reset)(void); |
| |
| // Flush the feeding for the A2DP encoder. |
| void (*feeding_flush)(void); |
| |
| // Get the A2DP encoder interval (in milliseconds). |
| period_ms_t (*get_encoder_interval_ms)(void); |
| |
| // Prepare and send A2DP encoded frames. |
| // |timestamp_us| is the current timestamp (in microseconds). |
| void (*send_frames)(uint64_t timestamp_us); |
| |
| // Dump codec-related statistics. |
| // |fd| is the file descriptor to use to dump the statistics information |
| // in user-friendly test format. |
| void (*debug_codec_dump)(int fd); |
| } tA2DP_ENCODER_INTERFACE; |
| |
| /***************************************************************************** |
| ** external function declarations |
| *****************************************************************************/ |
| /****************************************************************************** |
| ** |
| ** Function A2DP_AddRecord |
| ** |
| ** Description This function is called by a server application to add |
| ** SRC or SNK information to an SDP record. Prior to |
| ** calling this function the application must call |
| ** SDP_CreateRecord() to create an SDP record. |
| ** |
| ** Input Parameters: |
| ** service_uuid: Indicates SRC or SNK. |
| ** |
| ** p_service_name: Pointer to a null-terminated character |
| ** string containing the service name. |
| ** |
| ** p_provider_name: Pointer to a null-terminated character |
| ** string containing the provider name. |
| ** |
| ** features: Profile supported features. |
| ** |
| ** sdp_handle: SDP handle returned by SDP_CreateRecord(). |
| ** |
| ** Output Parameters: |
| ** None. |
| ** |
| ** Returns A2DP_SUCCESS if function execution succeeded, |
| ** A2DP_INVALID_PARAMS if bad parameters are given. |
| ** A2DP_FAIL if function execution failed. |
| ** |
| ******************************************************************************/ |
| extern tA2DP_STATUS A2DP_AddRecord(uint16_t service_uuid, char* p_service_name, |
| char* p_provider_name, uint16_t features, |
| uint32_t sdp_handle); |
| |
| /****************************************************************************** |
| ** |
| ** Function A2DP_FindService |
| ** |
| ** Description This function is called by a client application to |
| ** perform service discovery and retrieve SRC or SNK SDP |
| ** record information from a server. Information is |
| ** returned for the first service record found on the |
| ** server that matches the service UUID. The callback |
| ** function will be executed when service discovery is |
| ** complete. There can only be one outstanding call to |
| ** A2DP_FindService() at a time; the application must wait |
| ** for the callback before it makes another call to |
| ** the function. |
| ** |
| ** Input Parameters: |
| ** service_uuid: Indicates SRC or SNK. |
| ** |
| ** bd_addr: BD address of the peer device. |
| ** |
| ** p_db: Pointer to the information to initialize |
| ** the discovery database. |
| ** |
| ** p_cback: Pointer to the A2DP_FindService() |
| ** callback function. |
| ** |
| ** Output Parameters: |
| ** None. |
| ** |
| ** Returns A2DP_SUCCESS if function execution succeeded, |
| ** A2DP_INVALID_PARAMS if bad parameters are given. |
| ** A2DP_BUSY if discovery is already in progress. |
| ** A2DP_FAIL if function execution failed. |
| ** |
| ******************************************************************************/ |
| extern tA2DP_STATUS A2DP_FindService(uint16_t service_uuid, BD_ADDR bd_addr, |
| tA2DP_SDP_DB_PARAMS* p_db, |
| tA2DP_FIND_CBACK* p_cback); |
| |
| /****************************************************************************** |
| ** |
| ** Function A2DP_SetTraceLevel |
| ** |
| ** Description Sets the trace level for A2D. If 0xff is passed, the |
| ** current trace level is returned. |
| ** |
| ** Input Parameters: |
| ** new_level: The level to set the A2DP tracing to: |
| ** 0xff-returns the current setting. |
| ** 0-turns off tracing. |
| ** >= 1-Errors. |
| ** >= 2-Warnings. |
| ** >= 3-APIs. |
| ** >= 4-Events. |
| ** >= 5-Debug. |
| ** |
| ** Returns The new trace level or current trace level if |
| ** the input parameter is 0xff. |
| ** |
| ******************************************************************************/ |
| extern uint8_t A2DP_SetTraceLevel(uint8_t new_level); |
| |
| /****************************************************************************** |
| ** Function A2DP_BitsSet |
| ** |
| ** Description Check the given num for the number of bits set |
| ** Returns A2DP_SET_ONE_BIT, if one and only one bit is set |
| ** A2DP_SET_ZERO_BIT, if all bits clear |
| ** A2DP_SET_MULTL_BIT, if multiple bits are set |
| ******************************************************************************/ |
| extern uint8_t A2DP_BitsSet(uint8_t num); |
| |
| // Initializes the A2DP control block. |
| void A2DP_Init(void); |
| |
| // Gets the A2DP codec type. |
| // |p_codec_info| contains information about the codec capabilities. |
| tA2DP_CODEC_TYPE A2DP_GetCodecType(const uint8_t* p_codec_info); |
| |
| // Checks whether the codec capabilities contain a valid A2DP Source codec. |
| // NOTE: only codecs that are implemented are considered valid. |
| // Returns true if |p_codec_info| contains information about a valid codec, |
| // otherwise false. |
| bool A2DP_IsSourceCodecValid(const uint8_t* p_codec_info); |
| |
| // Checks whether the codec capabilities contain a valid A2DP Sink codec. |
| // NOTE: only codecs that are implemented are considered valid. |
| // Returns true if |p_codec_info| contains information about a valid codec, |
| // otherwise false. |
| bool A2DP_IsSinkCodecValid(const uint8_t* p_codec_info); |
| |
| // Checks whether the codec capabilities contain a valid peer A2DP Source |
| // codec. |
| // NOTE: only codecs that are implemented are considered valid. |
| // Returns true if |p_codec_info| contains information about a valid codec, |
| // otherwise false. |
| bool A2DP_IsPeerSourceCodecValid(const uint8_t* p_codec_info); |
| |
| // Checks whether the codec capabilities contain a valid peer A2DP Sink codec. |
| // NOTE: only codecs that are implemented are considered valid. |
| // Returns true if |p_codec_info| contains information about a valid codec, |
| // otherwise false. |
| bool A2DP_IsPeerSinkCodecValid(const uint8_t* p_codec_info); |
| |
| // Checks whether an A2DP Source codec is supported. |
| // |p_codec_info| contains information about the codec capabilities. |
| // Returns true if the A2DP Source codec is supported, otherwise false. |
| bool A2DP_IsSourceCodecSupported(const uint8_t* p_codec_info); |
| |
| // Checks whether an A2DP Sink codec is supported. |
| // |p_codec_info| contains information about the codec capabilities. |
| // Returns true if the A2DP Sink codec is supported, otherwise false. |
| bool A2DP_IsSinkCodecSupported(const uint8_t* p_codec_info); |
| |
| // Checks whether an A2DP Source codec for a peer Source device is supported. |
| // |p_codec_info| contains information about the codec capabilities of the |
| // peer device. |
| // Returns true if the A2DP Source codec for a peer Source device is supported, |
| // otherwise false. |
| bool A2DP_IsPeerSourceCodecSupported(const uint8_t* p_codec_info); |
| |
| // Initialize state with the default A2DP codec. |
| // The initialized state with the codec capabilities is stored in |
| // |p_codec_info|. |
| void A2DP_InitDefaultCodec(uint8_t* p_codec_info); |
| |
| // Sets A2DB source codec state based on the Source codec index |
| // |source_codec_sep_index| and the feeding information from |
| // |p_feeding_params|. |
| // The state with the codec capabilities is stored in |p_codec_info|. |
| // Returns true on success, otherwise false. |
| // |source_codec_sep_index| should be in the range |
| // [A2DP_CODEC_SEP_INDEX_SOURCE_MIN, A2DP_CODEC_SEP_INDEX_SOURCE_MAX), |
| // otherwise the return value is false. |
| bool A2DP_SetSourceCodec(tA2DP_CODEC_SEP_INDEX source_codec_sep_index, |
| const tA2DP_FEEDING_PARAMS* p_feeding_params, |
| uint8_t* p_codec_info); |
| |
| // Builds A2DP preferred Sink capability from Source capability. |
| // |p_src_cap| is the Source capability to use. |
| // |p_pref_cfg| is the result Sink capability to store. |
| // Returns |A2DP_SUCCESS| on success, otherwise the corresponding A2DP error |
| // status code. |
| tA2DP_STATUS A2DP_BuildSrc2SinkConfig(const uint8_t* p_src_cap, |
| uint8_t* p_pref_cfg); |
| |
| // Builds A2DP Sink codec config from Source codec config and Sink codec |
| // capability. |
| // |p_src_config| is the A2DP Source codec config to use. |
| // |p_sink_cap| is the A2DP Sink codec capability to use. |
| // The result is stored in |p_result_sink_config|. |
| // Returns |A2DP_SUCCESS| on success, otherwise the corresponding A2DP error |
| // status code. |
| tA2DP_STATUS A2DP_BuildSinkConfig(const uint8_t* p_src_config, |
| const uint8_t* p_sink_cap, |
| uint8_t* p_result_sink_config); |
| |
| // Checks whether the A2DP data packets should contain RTP header. |
| // |content_protection_enabled| is true if Content Protection is |
| // enabled. |p_codec_info| contains information about the codec capabilities. |
| // Returns true if the A2DP data packets should contain RTP header, otherwise |
| // false. |
| bool A2DP_UsesRtpHeader(bool content_protection_enabled, |
| const uint8_t* p_codec_info); |
| |
| // Gets the A2DP codec name for a given |codec_sep_index|. |
| const char* A2DP_CodecSepIndexStr(tA2DP_CODEC_SEP_INDEX codec_sep_index); |
| |
| // Initializes A2DP codec-specific information into |tAVDT_CFG| configuration |
| // entry pointed by |p_cfg|. The selected codec is defined by |
| // |codec_sep_index|. |
| // Returns true on success, otherwise false. |
| bool A2DP_InitCodecConfig(tA2DP_CODEC_SEP_INDEX codec_sep_index, |
| tAVDT_CFG* p_cfg); |
| |
| // Gets the |AVDT_MEDIA_TYPE_*| media type from the codec capability |
| // in |p_codec_info|. |
| uint8_t A2DP_GetMediaType(const uint8_t* p_codec_info); |
| |
| // Gets the A2DP codec name for a given |p_codec_info|. |
| const char* A2DP_CodecName(const uint8_t* p_codec_info); |
| |
| // Checks whether two A2DP codecs |p_codec_info_a| and |p_codec_info_b| have |
| // the same type. |
| // Returns true if the two codecs have the same type, otherwise false. |
| // If the codec type is not recognized, the return value is false. |
| bool A2DP_CodecTypeEquals(const uint8_t* p_codec_info_a, |
| const uint8_t* p_codec_info_b); |
| |
| // Checks whether two A2DP codecs p_codec_info_a| and |p_codec_info_b| are |
| // exactly the same. |
| // Returns true if the two codecs are exactly the same, otherwise false. |
| // If the codec type is not recognized, the return value is false. |
| bool A2DP_CodecEquals(const uint8_t* p_codec_info_a, |
| const uint8_t* p_codec_info_b); |
| |
| // Checks whether two A2DP codecs |p_codec_info_a| and |p_codec_info_b| |
| // are different, and A2DP requires reconfiguration. |
| // Returns true if the two codecs are different and A2DP requires |
| // reconfiguration, otherwise false. |
| // If the codec type is not recognized, the return value is true. |
| bool A2DP_CodecRequiresReconfig(const uint8_t* p_codec_info_a, |
| const uint8_t* p_codec_info_b); |
| |
| // Checks if a codec config |p_codec_config| matches a codec capabilities |
| // |p_codec_caps|. |
| // Returns true if the codec config is supported, otherwise false. |
| bool A2DP_CodecConfigMatchesCapabilities(const uint8_t* p_codec_config, |
| const uint8_t* p_codec_caps); |
| |
| // Gets the track sampling frequency value for the A2DP codec. |
| // |p_codec_info| is a pointer to the codec_info to decode. |
| // Returns the track sampling frequency on success, or -1 if |p_codec_info| |
| // contains invalid codec information. |
| int A2DP_GetTrackFrequency(const uint8_t* p_codec_info); |
| |
| // Gets the channel count for the A2DP codec. |
| // |p_codec_info| is a pointer to the codec_info to decode. |
| // Returns the channel count on success, or -1 if |p_codec_info| |
| // contains invalid codec information. |
| int A2DP_GetTrackChannelCount(const uint8_t* p_codec_info); |
| |
| // Gets the number of subbands for the A2DP codec. |
| // |p_codec_info| is a pointer to the codec_info to decode. |
| // Returns the number of subbands on success, or -1 if |p_codec_info| |
| // contains invalid codec information. |
| int A2DP_GetNumberOfSubbands(const uint8_t* p_codec_info); |
| |
| // Gets the number of blocks for the A2DP codec. |
| // |p_codec_info| is a pointer to the codec_info to decode. |
| // Returns the number of blocks on success, or -1 if |p_codec_info| |
| // contains invalid codec information. |
| int A2DP_GetNumberOfBlocks(const uint8_t* p_codec_info); |
| |
| // Gets the allocation method code for the A2DP codec. |
| // The actual value is codec-specific. |
| // |p_codec_info| is a pointer to the codec_info to decode. |
| // Returns the allocation method code on success, or -1 if |p_codec_info| |
| // contains invalid codec information. |
| int A2DP_GetAllocationMethodCode(const uint8_t* p_codec_info); |
| |
| // Gets the channel mode code for the A2DP codec. |
| // The actual value is codec-specific. |
| // |p_codec_info| is a pointer to the codec_info to decode. |
| // Returns the channel mode code on success, or -1 if |p_codec_info| |
| // contains invalid codec information. |
| int A2DP_GetChannelModeCode(const uint8_t* p_codec_info); |
| |
| // Gets the sampling frequency code for the A2DP codec. |
| // The actual value is codec-specific. |
| // |p_codec_info| is a pointer to the codec_info to decode. |
| // Returns the sampling frequency code on success, or -1 if |p_codec_info| |
| // contains invalid codec information. |
| int A2DP_GetSamplingFrequencyCode(const uint8_t* p_codec_info); |
| |
| // Gets the minimum bitpool for the A2DP codec. |
| // The actual value is codec-specific. |
| // |p_codec_info| is a pointer to the codec_info to decode. |
| // Returns the minimum bitpool on success, or -1 if |p_codec_info| |
| // contains invalid codec information. |
| int A2DP_GetMinBitpool(const uint8_t* p_codec_info); |
| |
| // Gets the maximum bitpool for the A2DP codec. |
| // The actual value is codec-specific. |
| // |p_codec_info| is a pointer to the codec_info to decode. |
| // Returns the maximum bitpool on success, or -1 if |p_codec_info| |
| // contains invalid codec information. |
| int A2DP_GetMaxBitpool(const uint8_t* p_codec_info); |
| |
| // Gets the channel type for the A2DP Sink codec: |
| // 1 for mono, or 3 for dual/stereo/joint. |
| // |p_codec_info| is a pointer to the codec_info to decode. |
| // Returns the channel type on success, or -1 if |p_codec_info| |
| // contains invalid codec information. |
| int A2DP_GetSinkTrackChannelType(const uint8_t* p_codec_info); |
| |
| // Computes the number of frames to process in a time window for the A2DP |
| // Sink codec. |time_interval_ms| is the time interval (in milliseconds). |
| // |p_codec_info| is a pointer to the codec_info to decode. |
| // Returns the number of frames to process on success, or -1 if |p_codec_info| |
| // contains invalid codec information. |
| int A2DP_GetSinkFramesCountToProcess(uint64_t time_interval_ms, |
| const uint8_t* p_codec_info); |
| |
| // Gets the A2DP audio data timestamp from an audio packet. |
| // |p_codec_info| contains the codec information. |
| // |p_data| contains the audio data. |
| // The timestamp is stored in |p_timestamp|. |
| // Returns true on success, otherwise false. |
| bool A2DP_GetPacketTimestamp(const uint8_t* p_codec_info, const uint8_t* p_data, |
| uint32_t* p_timestamp); |
| |
| // Builds A2DP codec header for audio data. |
| // |p_codec_info| contains the codec information. |
| // |p_buf| contains the audio data. |
| // |frames_per_packet| is the number of frames in this packet. |
| // Returns true on success, otherwise false. |
| bool A2DP_BuildCodecHeader(const uint8_t* p_codec_info, BT_HDR* p_buf, |
| uint16_t frames_per_packet); |
| |
| // Gets the A2DP encoder interface that can be used to encode and prepare |
| // A2DP packets for transmission - see |tA2DP_ENCODER_INTERFACE|. |
| // |p_codec_info| contains the codec information. |
| // Returns the A2DP encoder interface if the |p_codec_info| is valid and |
| // supported, otherwise NULL. |
| const tA2DP_ENCODER_INTERFACE* A2DP_GetEncoderInterface( |
| const uint8_t* p_codec_info); |
| |
| // Adjusts the A2DP codec, based on local support and Bluetooth specification. |
| // |p_codec_info| contains the codec information to adjust. |
| // Returns true if |p_codec_info| is valid and supported, otherwise false. |
| bool A2DP_AdjustCodec(uint8_t* p_codec_info); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* A2DP_API_H */ |