Project import
diff --git a/freetype/Android.mk b/freetype/Android.mk
new file mode 100644
index 0000000..b2b780b
--- /dev/null
+++ b/freetype/Android.mk
@@ -0,0 +1,61 @@
+# this is now the default FreeType build for Android
+#
+ifndef USE_FREETYPE
+USE_FREETYPE := 2.6.0
+endif
+
+ifeq ($(USE_FREETYPE),2.6.0)
+LOCAL_PATH:= $(call my-dir)
+include $(CLEAR_VARS)
+
+# compile in ARM mode, since the glyph loader/renderer is a hotspot
+# when loading complex pages in the browser
+#
+LOCAL_ARM_MODE := arm
+
+LOCAL_SRC_FILES:= \
+ src/base/ftbbox.c \
+ src/base/ftbitmap.c \
+ src/base/ftfntfmt.c \
+ src/base/ftfstype.c \
+ src/base/ftglyph.c \
+ src/base/ftlcdfil.c \
+ src/base/ftstroke.c \
+ src/base/fttype1.c \
+ src/base/ftbase.c \
+ src/base/ftsystem.c \
+ src/base/ftinit.c \
+ src/base/ftgasp.c \
+ src/base/ftmm.c \
+ src/gzip/ftgzip.c \
+ src/raster/raster.c \
+ src/sfnt/sfnt.c \
+ src/smooth/smooth.c \
+ src/autofit/autofit.c \
+ src/truetype/truetype.c \
+ src/cff/cff.c \
+ src/psnames/psnames.c \
+ src/pshinter/pshinter.c
+
+LOCAL_C_INCLUDES += \
+ $(LOCAL_PATH)/include \
+ external/libpng \
+ external/zlib
+
+LOCAL_CFLAGS += -W -Wall
+LOCAL_CFLAGS += -fPIC -DPIC
+LOCAL_CFLAGS += "-DDARWIN_NO_CARBON"
+LOCAL_CFLAGS += "-DFT2_BUILD_LIBRARY"
+
+LOCAL_SHARED_LIBRARIES += libpng libz
+
+# the following is for testing only, and should not be used in final builds
+# of the product
+#LOCAL_CFLAGS += "-DTT_CONFIG_OPTION_BYTECODE_INTERPRETER"
+
+LOCAL_CFLAGS += -O2
+
+LOCAL_MODULE:= libft2
+
+include $(BUILD_SHARED_LIBRARY)
+endif
diff --git a/freetype/CleanSpec.mk b/freetype/CleanSpec.mk
new file mode 100644
index 0000000..b9cafef
--- /dev/null
+++ b/freetype/CleanSpec.mk
@@ -0,0 +1,51 @@
+# Copyright (C) 2007 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# If you don't need to do a full clean build but would like to touch
+# a file or delete some intermediate files, add a clean step to the end
+# of the list. These steps will only be run once, if they haven't been
+# run before.
+#
+# E.g.:
+# $(call add-clean-step, touch -c external/sqlite/sqlite3.h)
+# $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libz_intermediates)
+#
+# Always use "touch -c" and "rm -f" or "rm -rf" to gracefully deal with
+# files that are missing or have been moved.
+#
+# Use $(PRODUCT_OUT) to get to the "out/target/product/blah/" directory.
+# Use $(OUT_DIR) to refer to the "out" directory.
+#
+# If you need to re-do something that's already mentioned, just copy
+# the command and add it to the bottom of the list. E.g., if a change
+# that you made last week required touching a file and a change you
+# made today requires touching the same file, just copy the old
+# touch step and add it to the end of the list.
+#
+# ************************************************
+# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
+# ************************************************
+
+# For example:
+#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/AndroidTests_intermediates)
+#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/core_intermediates)
+#$(call add-clean-step, find $(OUT_DIR) -type f -name "IGTalkSession*" -print0 | xargs -0 rm -f)
+#$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/*)
+
+# ************************************************
+# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
+# ************************************************
+
+$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/SHARED_LIBRARIES/libft2_*)
diff --git a/freetype/MODULE_LICENSE_BSD_LIKE b/freetype/MODULE_LICENSE_BSD_LIKE
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/freetype/MODULE_LICENSE_BSD_LIKE
diff --git a/freetype/NOTICE b/freetype/NOTICE
new file mode 100644
index 0000000..9d114a1
--- /dev/null
+++ b/freetype/NOTICE
@@ -0,0 +1,173 @@
+This software is based in part on the work of the FreeType Team.
+
+----------------------
+
+ The FreeType Project LICENSE
+ ----------------------------
+
+ 2006-Jan-27
+
+ Copyright 1996-2002, 2006 by
+ David Turner, Robert Wilhelm, and Werner Lemberg
+
+
+
+Introduction
+============
+
+ The FreeType Project is distributed in several archive packages;
+ some of them may contain, in addition to the FreeType font engine,
+ various tools and contributions which rely on, or relate to, the
+ FreeType Project.
+
+ This license applies to all files found in such packages, and
+ which do not fall under their own explicit license. The license
+ affects thus the FreeType font engine, the test programs,
+ documentation and makefiles, at the very least.
+
+ This license was inspired by the BSD, Artistic, and IJG
+ (Independent JPEG Group) licenses, which all encourage inclusion
+ and use of free software in commercial and freeware products
+ alike. As a consequence, its main points are that:
+
+ o We don't promise that this software works. However, we will be
+ interested in any kind of bug reports. (`as is' distribution)
+
+ o You can use this software for whatever you want, in parts or
+ full form, without having to pay us. (`royalty-free' usage)
+
+ o You may not pretend that you wrote this software. If you use
+ it, or only parts of it, in a program, you must acknowledge
+ somewhere in your documentation that you have used the
+ FreeType code. (`credits')
+
+ We specifically permit and encourage the inclusion of this
+ software, with or without modifications, in commercial products.
+ We disclaim all warranties covering The FreeType Project and
+ assume no liability related to The FreeType Project.
+
+
+ Finally, many people asked us for a preferred form for a
+ credit/disclaimer to use in compliance with this license. We thus
+ encourage you to use the following text:
+
+ """
+ Portions of this software are copyright © <year> The FreeType
+ Project (www.freetype.org). All rights reserved.
+ """
+
+ Please replace <year> with the value from the FreeType version you
+ actually use.
+
+
+Legal Terms
+===========
+
+0. Definitions
+--------------
+
+ Throughout this license, the terms `package', `FreeType Project',
+ and `FreeType archive' refer to the set of files originally
+ distributed by the authors (David Turner, Robert Wilhelm, and
+ Werner Lemberg) as the `FreeType Project', be they named as alpha,
+ beta or final release.
+
+ `You' refers to the licensee, or person using the project, where
+ `using' is a generic term including compiling the project's source
+ code as well as linking it to form a `program' or `executable'.
+ This program is referred to as `a program using the FreeType
+ engine'.
+
+ This license applies to all files distributed in the original
+ FreeType Project, including all source code, binaries and
+ documentation, unless otherwise stated in the file in its
+ original, unmodified form as distributed in the original archive.
+ If you are unsure whether or not a particular file is covered by
+ this license, you must contact us to verify this.
+
+ The FreeType Project is copyright (C) 1996-2000 by David Turner,
+ Robert Wilhelm, and Werner Lemberg. All rights reserved except as
+ specified below.
+
+1. No Warranty
+--------------
+
+ THE FREETYPE PROJECT IS PROVIDED `AS IS' WITHOUT WARRANTY OF ANY
+ KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS
+ BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO
+ USE, OF THE FREETYPE PROJECT.
+
+2. Redistribution
+-----------------
+
+ This license grants a worldwide, royalty-free, perpetual and
+ irrevocable right and license to use, execute, perform, compile,
+ display, copy, create derivative works of, distribute and
+ sublicense the FreeType Project (in both source and object code
+ forms) and derivative works thereof for any purpose; and to
+ authorize others to exercise some or all of the rights granted
+ herein, subject to the following conditions:
+
+ o Redistribution of source code must retain this license file
+ (`FTL.TXT') unaltered; any additions, deletions or changes to
+ the original files must be clearly indicated in accompanying
+ documentation. The copyright notices of the unaltered,
+ original files must be preserved in all copies of source
+ files.
+
+ o Redistribution in binary form must provide a disclaimer that
+ states that the software is based in part of the work of the
+ FreeType Team, in the distribution documentation. We also
+ encourage you to put an URL to the FreeType web page in your
+ documentation, though this isn't mandatory.
+
+ These conditions apply to any software derived from or based on
+ the FreeType Project, not just the unmodified files. If you use
+ our work, you must acknowledge us. However, no fee need be paid
+ to us.
+
+3. Advertising
+--------------
+
+ Neither the FreeType authors and contributors nor you shall use
+ the name of the other for commercial, advertising, or promotional
+ purposes without specific prior written permission.
+
+ We suggest, but do not require, that you use one or more of the
+ following phrases to refer to this software in your documentation
+ or advertising materials: `FreeType Project', `FreeType Engine',
+ `FreeType library', or `FreeType Distribution'.
+
+ As you have not signed this license, you are not required to
+ accept it. However, as the FreeType Project is copyrighted
+ material, only this license, or another one contracted with the
+ authors, grants you the right to use, distribute, and modify it.
+ Therefore, by using, distributing, or modifying the FreeType
+ Project, you indicate that you understand and accept all the terms
+ of this license.
+
+4. Contacts
+-----------
+
+ There are two mailing lists related to FreeType:
+
+ o freetype@nongnu.org
+
+ Discusses general use and applications of FreeType, as well as
+ future and wanted additions to the library and distribution.
+ If you are looking for support, start in this list if you
+ haven't found anything to help you in the documentation.
+
+ o freetype-devel@nongnu.org
+
+ Discusses bugs, as well as engine internals, design issues,
+ specific licenses, porting, etc.
+
+ Our home page can be found at
+
+ http://www.freetype.org
+
+
+--- end of FTL.TXT ---
diff --git a/freetype/README.android b/freetype/README.android
new file mode 100644
index 0000000..c3139d5
--- /dev/null
+++ b/freetype/README.android
@@ -0,0 +1,16 @@
+Name: FreeType
+Version: 2.6.2 + update
+Revision: a512b0fe7a8d9db0e5aa9c0a4db1e92cb861722d
+
+Local modifications:
+
+1. Drop unused build files (Jamfiles, {module,rules}.mk)
+2. Drop src directories for unused modules:
+ bdf, cid, pcf, pfr, type1, type42, winfonts
+3. Drop src/{bzip2,tools,lzw,otvalid,gxvalid}
+4. Customize include/freetype/config/{ftmodule,ftoption}.h by applying
+ module_option.diff
+
+To faciliate an easier update, all the files in src/{base,autofit} are kept
+even if some of them are for dropped modules/options. Android.mk can be used
+to control exactly what's built.
diff --git a/freetype/include/freetype/config/ftconfig.h b/freetype/include/freetype/config/ftconfig.h
new file mode 100644
index 0000000..d4d7993
--- /dev/null
+++ b/freetype/include/freetype/config/ftconfig.h
@@ -0,0 +1,467 @@
+/***************************************************************************/
+/* */
+/* ftconfig.h */
+/* */
+/* ANSI-specific configuration file (specification only). */
+/* */
+/* Copyright 1996-2015 by */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* This header file contains a number of macro definitions that are used */
+ /* by the rest of the engine. Most of the macros here are automatically */
+ /* determined at compile time, and you should not need to change it to */
+ /* port FreeType, except to compile the library with a non-ANSI */
+ /* compiler. */
+ /* */
+ /* Note however that if some specific modifications are needed, we */
+ /* advise you to place a modified copy in your build directory. */
+ /* */
+ /* The build directory is usually `builds/<system>', and contains */
+ /* system-specific files that are always included first when building */
+ /* the library. */
+ /* */
+ /* This ANSI version should stay in `include/config/'. */
+ /* */
+ /*************************************************************************/
+
+#ifndef __FTCONFIG_H__
+#define __FTCONFIG_H__
+
+#include <ft2build.h>
+#include FT_CONFIG_OPTIONS_H
+#include FT_CONFIG_STANDARD_LIBRARY_H
+
+
+FT_BEGIN_HEADER
+
+
+ /*************************************************************************/
+ /* */
+ /* PLATFORM-SPECIFIC CONFIGURATION MACROS */
+ /* */
+ /* These macros can be toggled to suit a specific system. The current */
+ /* ones are defaults used to compile FreeType in an ANSI C environment */
+ /* (16bit compilers are also supported). Copy this file to your own */
+ /* `builds/<system>' directory, and edit it to port the engine. */
+ /* */
+ /*************************************************************************/
+
+
+ /* There are systems (like the Texas Instruments 'C54x) where a `char' */
+ /* has 16 bits. ANSI C says that sizeof(char) is always 1. Since an */
+ /* `int' has 16 bits also for this system, sizeof(int) gives 1 which */
+ /* is probably unexpected. */
+ /* */
+ /* `CHAR_BIT' (defined in limits.h) gives the number of bits in a */
+ /* `char' type. */
+
+#ifndef FT_CHAR_BIT
+#define FT_CHAR_BIT CHAR_BIT
+#endif
+
+
+ /* The size of an `int' type. */
+#if FT_UINT_MAX == 0xFFFFUL
+#define FT_SIZEOF_INT (16 / FT_CHAR_BIT)
+#elif FT_UINT_MAX == 0xFFFFFFFFUL
+#define FT_SIZEOF_INT (32 / FT_CHAR_BIT)
+#elif FT_UINT_MAX > 0xFFFFFFFFUL && FT_UINT_MAX == 0xFFFFFFFFFFFFFFFFUL
+#define FT_SIZEOF_INT (64 / FT_CHAR_BIT)
+#else
+#error "Unsupported size of `int' type!"
+#endif
+
+ /* The size of a `long' type. A five-byte `long' (as used e.g. on the */
+ /* DM642) is recognized but avoided. */
+#if FT_ULONG_MAX == 0xFFFFFFFFUL
+#define FT_SIZEOF_LONG (32 / FT_CHAR_BIT)
+#elif FT_ULONG_MAX > 0xFFFFFFFFUL && FT_ULONG_MAX == 0xFFFFFFFFFFUL
+#define FT_SIZEOF_LONG (32 / FT_CHAR_BIT)
+#elif FT_ULONG_MAX > 0xFFFFFFFFUL && FT_ULONG_MAX == 0xFFFFFFFFFFFFFFFFUL
+#define FT_SIZEOF_LONG (64 / FT_CHAR_BIT)
+#else
+#error "Unsupported size of `long' type!"
+#endif
+
+
+ /* FT_UNUSED is a macro used to indicate that a given parameter is not */
+ /* used -- this is only used to get rid of unpleasant compiler warnings */
+#ifndef FT_UNUSED
+#define FT_UNUSED( arg ) ( (arg) = (arg) )
+#endif
+
+
+ /*************************************************************************/
+ /* */
+ /* AUTOMATIC CONFIGURATION MACROS */
+ /* */
+ /* These macros are computed from the ones defined above. Don't touch */
+ /* their definition, unless you know precisely what you are doing. No */
+ /* porter should need to mess with them. */
+ /* */
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* Mac support */
+ /* */
+ /* This is the only necessary change, so it is defined here instead */
+ /* providing a new configuration file. */
+ /* */
+#if defined( __APPLE__ ) || ( defined( __MWERKS__ ) && defined( macintosh ) )
+ /* no Carbon frameworks for 64bit 10.4.x */
+ /* AvailabilityMacros.h is available since Mac OS X 10.2, */
+ /* so guess the system version by maximum errno before inclusion */
+#include <errno.h>
+#ifdef ECANCELED /* defined since 10.2 */
+#include "AvailabilityMacros.h"
+#endif
+#if defined( __LP64__ ) && \
+ ( MAC_OS_X_VERSION_MIN_REQUIRED <= MAC_OS_X_VERSION_10_4 )
+#undef FT_MACINTOSH
+#endif
+
+#elif defined( __SC__ ) || defined( __MRC__ )
+ /* Classic MacOS compilers */
+#include "ConditionalMacros.h"
+#if TARGET_OS_MAC
+#define FT_MACINTOSH 1
+#endif
+
+#endif
+
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* basic_types */
+ /* */
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_Int16 */
+ /* */
+ /* <Description> */
+ /* A typedef for a 16bit signed integer type. */
+ /* */
+ typedef signed short FT_Int16;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_UInt16 */
+ /* */
+ /* <Description> */
+ /* A typedef for a 16bit unsigned integer type. */
+ /* */
+ typedef unsigned short FT_UInt16;
+
+ /* */
+
+
+ /* this #if 0 ... #endif clause is for documentation purposes */
+#if 0
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_Int32 */
+ /* */
+ /* <Description> */
+ /* A typedef for a 32bit signed integer type. The size depends on */
+ /* the configuration. */
+ /* */
+ typedef signed XXX FT_Int32;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_UInt32 */
+ /* */
+ /* A typedef for a 32bit unsigned integer type. The size depends on */
+ /* the configuration. */
+ /* */
+ typedef unsigned XXX FT_UInt32;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_Int64 */
+ /* */
+ /* A typedef for a 64bit signed integer type. The size depends on */
+ /* the configuration. Only defined if there is real 64bit support; */
+ /* otherwise, it gets emulated with a structure (if necessary). */
+ /* */
+ typedef signed XXX FT_Int64;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_UInt64 */
+ /* */
+ /* A typedef for a 64bit unsigned integer type. The size depends on */
+ /* the configuration. Only defined if there is real 64bit support; */
+ /* otherwise, it gets emulated with a structure (if necessary). */
+ /* */
+ typedef unsigned XXX FT_UInt64;
+
+ /* */
+
+#endif
+
+#if FT_SIZEOF_INT == (32 / FT_CHAR_BIT)
+
+ typedef signed int FT_Int32;
+ typedef unsigned int FT_UInt32;
+
+#elif FT_SIZEOF_LONG == (32 / FT_CHAR_BIT)
+
+ typedef signed long FT_Int32;
+ typedef unsigned long FT_UInt32;
+
+#else
+#error "no 32bit type found -- please check your configuration files"
+#endif
+
+
+ /* look up an integer type that is at least 32 bits */
+#if FT_SIZEOF_INT >= (32 / FT_CHAR_BIT)
+
+ typedef int FT_Fast;
+ typedef unsigned int FT_UFast;
+
+#elif FT_SIZEOF_LONG >= (32 / FT_CHAR_BIT)
+
+ typedef long FT_Fast;
+ typedef unsigned long FT_UFast;
+
+#endif
+
+
+ /* determine whether we have a 64-bit int type for platforms without */
+ /* Autoconf */
+#if FT_SIZEOF_LONG == (64 / FT_CHAR_BIT)
+
+ /* FT_LONG64 must be defined if a 64-bit type is available */
+#define FT_LONG64
+#define FT_INT64 long
+#define FT_UINT64 unsigned long
+
+ /*************************************************************************/
+ /* */
+ /* A 64-bit data type may create compilation problems if you compile */
+ /* in strict ANSI mode. To avoid them, we disable other 64-bit data */
+ /* types if __STDC__ is defined. You can however ignore this rule */
+ /* by defining the FT_CONFIG_OPTION_FORCE_INT64 configuration macro. */
+ /* */
+#elif !defined( __STDC__ ) || defined( FT_CONFIG_OPTION_FORCE_INT64 )
+
+#if defined( _MSC_VER ) && _MSC_VER >= 900 /* Visual C++ (and Intel C++) */
+
+ /* this compiler provides the __int64 type */
+#define FT_LONG64
+#define FT_INT64 __int64
+#define FT_UINT64 unsigned __int64
+
+#elif defined( __BORLANDC__ ) /* Borland C++ */
+
+ /* XXXX: We should probably check the value of __BORLANDC__ in order */
+ /* to test the compiler version. */
+
+ /* this compiler provides the __int64 type */
+#define FT_LONG64
+#define FT_INT64 __int64
+#define FT_UINT64 unsigned __int64
+
+#elif defined( __WATCOMC__ ) /* Watcom C++ */
+
+ /* Watcom doesn't provide 64-bit data types */
+
+#elif defined( __MWERKS__ ) /* Metrowerks CodeWarrior */
+
+#define FT_LONG64
+#define FT_INT64 long long int
+#define FT_UINT64 unsigned long long int
+
+#elif defined( __GNUC__ )
+
+ /* GCC provides the `long long' type */
+#define FT_LONG64
+#define FT_INT64 long long int
+#define FT_UINT64 unsigned long long int
+
+#endif /* _MSC_VER */
+
+#endif /* FT_SIZEOF_LONG == (64 / FT_CHAR_BIT) */
+
+#ifdef FT_LONG64
+ typedef FT_INT64 FT_Int64;
+ typedef FT_UINT64 FT_UInt64;
+#endif
+
+
+ /*************************************************************************/
+ /* */
+ /* miscellaneous */
+ /* */
+ /*************************************************************************/
+
+
+#define FT_BEGIN_STMNT do {
+#define FT_END_STMNT } while ( 0 )
+#define FT_DUMMY_STMNT FT_BEGIN_STMNT FT_END_STMNT
+
+
+ /* typeof condition taken from gnulib's `intprops.h' header file */
+#if ( __GNUC__ >= 2 || \
+ defined( __IBM__TYPEOF__ ) || \
+ ( __SUNPRO_C >= 0x5110 && !__STDC__ ) )
+#define FT_TYPEOF( type ) (__typeof__ (type))
+#else
+#define FT_TYPEOF( type ) /* empty */
+#endif
+
+
+#ifdef FT_MAKE_OPTION_SINGLE_OBJECT
+
+#define FT_LOCAL( x ) static x
+#define FT_LOCAL_DEF( x ) static x
+
+#else
+
+#ifdef __cplusplus
+#define FT_LOCAL( x ) extern "C" x
+#define FT_LOCAL_DEF( x ) extern "C" x
+#else
+#define FT_LOCAL( x ) extern x
+#define FT_LOCAL_DEF( x ) x
+#endif
+
+#endif /* FT_MAKE_OPTION_SINGLE_OBJECT */
+
+#define FT_LOCAL_ARRAY( x ) extern const x
+#define FT_LOCAL_ARRAY_DEF( x ) const x
+
+
+#ifndef FT_BASE
+
+#ifdef __cplusplus
+#define FT_BASE( x ) extern "C" x
+#else
+#define FT_BASE( x ) extern x
+#endif
+
+#endif /* !FT_BASE */
+
+
+#ifndef FT_BASE_DEF
+
+#ifdef __cplusplus
+#define FT_BASE_DEF( x ) x
+#else
+#define FT_BASE_DEF( x ) x
+#endif
+
+#endif /* !FT_BASE_DEF */
+
+
+#ifndef FT_EXPORT
+
+#ifdef __cplusplus
+#define FT_EXPORT( x ) extern "C" x
+#else
+#define FT_EXPORT( x ) extern x
+#endif
+
+#endif /* !FT_EXPORT */
+
+
+#ifndef FT_EXPORT_DEF
+
+#ifdef __cplusplus
+#define FT_EXPORT_DEF( x ) extern "C" x
+#else
+#define FT_EXPORT_DEF( x ) extern x
+#endif
+
+#endif /* !FT_EXPORT_DEF */
+
+
+#ifndef FT_EXPORT_VAR
+
+#ifdef __cplusplus
+#define FT_EXPORT_VAR( x ) extern "C" x
+#else
+#define FT_EXPORT_VAR( x ) extern x
+#endif
+
+#endif /* !FT_EXPORT_VAR */
+
+ /* The following macros are needed to compile the library with a */
+ /* C++ compiler and with 16bit compilers. */
+ /* */
+
+ /* This is special. Within C++, you must specify `extern "C"' for */
+ /* functions which are used via function pointers, and you also */
+ /* must do that for structures which contain function pointers to */
+ /* assure C linkage -- it's not possible to have (local) anonymous */
+ /* functions which are accessed by (global) function pointers. */
+ /* */
+ /* */
+ /* FT_CALLBACK_DEF is used to _define_ a callback function. */
+ /* */
+ /* FT_CALLBACK_TABLE is used to _declare_ a constant variable that */
+ /* contains pointers to callback functions. */
+ /* */
+ /* FT_CALLBACK_TABLE_DEF is used to _define_ a constant variable */
+ /* that contains pointers to callback functions. */
+ /* */
+ /* */
+ /* Some 16bit compilers have to redefine these macros to insert */
+ /* the infamous `_cdecl' or `__fastcall' declarations. */
+ /* */
+#ifndef FT_CALLBACK_DEF
+#ifdef __cplusplus
+#define FT_CALLBACK_DEF( x ) extern "C" x
+#else
+#define FT_CALLBACK_DEF( x ) static x
+#endif
+#endif /* FT_CALLBACK_DEF */
+
+#ifndef FT_CALLBACK_TABLE
+#ifdef __cplusplus
+#define FT_CALLBACK_TABLE extern "C"
+#define FT_CALLBACK_TABLE_DEF extern "C"
+#else
+#define FT_CALLBACK_TABLE extern
+#define FT_CALLBACK_TABLE_DEF /* nothing */
+#endif
+#endif /* FT_CALLBACK_TABLE */
+
+
+FT_END_HEADER
+
+
+#endif /* __FTCONFIG_H__ */
+
+
+/* END */
diff --git a/freetype/include/freetype/config/ftheader.h b/freetype/include/freetype/config/ftheader.h
new file mode 100644
index 0000000..55f833d
--- /dev/null
+++ b/freetype/include/freetype/config/ftheader.h
@@ -0,0 +1,834 @@
+/***************************************************************************/
+/* */
+/* ftheader.h */
+/* */
+/* Build macros of the FreeType 2 library. */
+/* */
+/* Copyright 1996-2015 by */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+#ifndef __FT_HEADER_H__
+#define __FT_HEADER_H__
+
+
+ /*@***********************************************************************/
+ /* */
+ /* <Macro> */
+ /* FT_BEGIN_HEADER */
+ /* */
+ /* <Description> */
+ /* This macro is used in association with @FT_END_HEADER in header */
+ /* files to ensure that the declarations within are properly */
+ /* encapsulated in an `extern "C" { .. }' block when included from a */
+ /* C++ compiler. */
+ /* */
+#ifdef __cplusplus
+#define FT_BEGIN_HEADER extern "C" {
+#else
+#define FT_BEGIN_HEADER /* nothing */
+#endif
+
+
+ /*@***********************************************************************/
+ /* */
+ /* <Macro> */
+ /* FT_END_HEADER */
+ /* */
+ /* <Description> */
+ /* This macro is used in association with @FT_BEGIN_HEADER in header */
+ /* files to ensure that the declarations within are properly */
+ /* encapsulated in an `extern "C" { .. }' block when included from a */
+ /* C++ compiler. */
+ /* */
+#ifdef __cplusplus
+#define FT_END_HEADER }
+#else
+#define FT_END_HEADER /* nothing */
+#endif
+
+
+ /*************************************************************************/
+ /* */
+ /* Aliases for the FreeType 2 public and configuration files. */
+ /* */
+ /*************************************************************************/
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* header_file_macros */
+ /* */
+ /* <Title> */
+ /* Header File Macros */
+ /* */
+ /* <Abstract> */
+ /* Macro definitions used to #include specific header files. */
+ /* */
+ /* <Description> */
+ /* The following macros are defined to the name of specific */
+ /* FreeType~2 header files. They can be used directly in #include */
+ /* statements as in: */
+ /* */
+ /* { */
+ /* #include FT_FREETYPE_H */
+ /* #include FT_MULTIPLE_MASTERS_H */
+ /* #include FT_GLYPH_H */
+ /* } */
+ /* */
+ /* There are several reasons why we are now using macros to name */
+ /* public header files. The first one is that such macros are not */
+ /* limited to the infamous 8.3~naming rule required by DOS (and */
+ /* `FT_MULTIPLE_MASTERS_H' is a lot more meaningful than `ftmm.h'). */
+ /* */
+ /* The second reason is that it allows for more flexibility in the */
+ /* way FreeType~2 is installed on a given system. */
+ /* */
+ /*************************************************************************/
+
+
+ /* configuration files */
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_CONFIG_CONFIG_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing
+ * FreeType~2 configuration data.
+ *
+ */
+#ifndef FT_CONFIG_CONFIG_H
+#define FT_CONFIG_CONFIG_H <freetype/config/ftconfig.h>
+#endif
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_CONFIG_STANDARD_LIBRARY_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing
+ * FreeType~2 interface to the standard C library functions.
+ *
+ */
+#ifndef FT_CONFIG_STANDARD_LIBRARY_H
+#define FT_CONFIG_STANDARD_LIBRARY_H <freetype/config/ftstdlib.h>
+#endif
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_CONFIG_OPTIONS_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing
+ * FreeType~2 project-specific configuration options.
+ *
+ */
+#ifndef FT_CONFIG_OPTIONS_H
+#define FT_CONFIG_OPTIONS_H <freetype/config/ftoption.h>
+#endif
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_CONFIG_MODULES_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * list of FreeType~2 modules that are statically linked to new library
+ * instances in @FT_Init_FreeType.
+ *
+ */
+#ifndef FT_CONFIG_MODULES_H
+#define FT_CONFIG_MODULES_H <freetype/config/ftmodule.h>
+#endif
+
+ /* */
+
+ /* public headers */
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_FREETYPE_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * base FreeType~2 API.
+ *
+ */
+#define FT_FREETYPE_H <freetype/freetype.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_ERRORS_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * list of FreeType~2 error codes (and messages).
+ *
+ * It is included by @FT_FREETYPE_H.
+ *
+ */
+#define FT_ERRORS_H <freetype/fterrors.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_MODULE_ERRORS_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * list of FreeType~2 module error offsets (and messages).
+ *
+ */
+#define FT_MODULE_ERRORS_H <freetype/ftmoderr.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_SYSTEM_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * FreeType~2 interface to low-level operations (i.e., memory management
+ * and stream i/o).
+ *
+ * It is included by @FT_FREETYPE_H.
+ *
+ */
+#define FT_SYSTEM_H <freetype/ftsystem.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_IMAGE_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing type
+ * definitions related to glyph images (i.e., bitmaps, outlines,
+ * scan-converter parameters).
+ *
+ * It is included by @FT_FREETYPE_H.
+ *
+ */
+#define FT_IMAGE_H <freetype/ftimage.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_TYPES_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * basic data types defined by FreeType~2.
+ *
+ * It is included by @FT_FREETYPE_H.
+ *
+ */
+#define FT_TYPES_H <freetype/fttypes.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_LIST_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * list management API of FreeType~2.
+ *
+ * (Most applications will never need to include this file.)
+ *
+ */
+#define FT_LIST_H <freetype/ftlist.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_OUTLINE_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * scalable outline management API of FreeType~2.
+ *
+ */
+#define FT_OUTLINE_H <freetype/ftoutln.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_SIZES_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * API which manages multiple @FT_Size objects per face.
+ *
+ */
+#define FT_SIZES_H <freetype/ftsizes.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_MODULE_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * module management API of FreeType~2.
+ *
+ */
+#define FT_MODULE_H <freetype/ftmodapi.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_RENDER_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * renderer module management API of FreeType~2.
+ *
+ */
+#define FT_RENDER_H <freetype/ftrender.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_AUTOHINTER_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing
+ * structures and macros related to the auto-hinting module.
+ *
+ */
+#define FT_AUTOHINTER_H <freetype/ftautoh.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_CFF_DRIVER_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing
+ * structures and macros related to the CFF driver module.
+ *
+ */
+#define FT_CFF_DRIVER_H <freetype/ftcffdrv.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_TRUETYPE_DRIVER_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing
+ * structures and macros related to the TrueType driver module.
+ *
+ */
+#define FT_TRUETYPE_DRIVER_H <freetype/ftttdrv.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_TYPE1_TABLES_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * types and API specific to the Type~1 format.
+ *
+ */
+#define FT_TYPE1_TABLES_H <freetype/t1tables.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_TRUETYPE_IDS_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * enumeration values which identify name strings, languages, encodings,
+ * etc. This file really contains a _large_ set of constant macro
+ * definitions, taken from the TrueType and OpenType specifications.
+ *
+ */
+#define FT_TRUETYPE_IDS_H <freetype/ttnameid.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_TRUETYPE_TABLES_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * types and API specific to the TrueType (as well as OpenType) format.
+ *
+ */
+#define FT_TRUETYPE_TABLES_H <freetype/tttables.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_TRUETYPE_TAGS_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * definitions of TrueType four-byte `tags' which identify blocks in
+ * SFNT-based font formats (i.e., TrueType and OpenType).
+ *
+ */
+#define FT_TRUETYPE_TAGS_H <freetype/tttags.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_BDF_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * definitions of an API which accesses BDF-specific strings from a
+ * face.
+ *
+ */
+#define FT_BDF_H <freetype/ftbdf.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_CID_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * definitions of an API which access CID font information from a
+ * face.
+ *
+ */
+#define FT_CID_H <freetype/ftcid.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_GZIP_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * definitions of an API which supports gzip-compressed files.
+ *
+ */
+#define FT_GZIP_H <freetype/ftgzip.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_LZW_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * definitions of an API which supports LZW-compressed files.
+ *
+ */
+#define FT_LZW_H <freetype/ftlzw.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_BZIP2_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * definitions of an API which supports bzip2-compressed files.
+ *
+ */
+#define FT_BZIP2_H <freetype/ftbzip2.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_WINFONTS_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * definitions of an API which supports Windows FNT files.
+ *
+ */
+#define FT_WINFONTS_H <freetype/ftwinfnt.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_GLYPH_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * API of the optional glyph management component.
+ *
+ */
+#define FT_GLYPH_H <freetype/ftglyph.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_BITMAP_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * API of the optional bitmap conversion component.
+ *
+ */
+#define FT_BITMAP_H <freetype/ftbitmap.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_BBOX_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * API of the optional exact bounding box computation routines.
+ *
+ */
+#define FT_BBOX_H <freetype/ftbbox.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_CACHE_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * API of the optional FreeType~2 cache sub-system.
+ *
+ */
+#define FT_CACHE_H <freetype/ftcache.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_CACHE_IMAGE_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * `glyph image' API of the FreeType~2 cache sub-system.
+ *
+ * It is used to define a cache for @FT_Glyph elements. You can also
+ * use the API defined in @FT_CACHE_SMALL_BITMAPS_H if you only need to
+ * store small glyph bitmaps, as it will use less memory.
+ *
+ * This macro is deprecated. Simply include @FT_CACHE_H to have all
+ * glyph image-related cache declarations.
+ *
+ */
+#define FT_CACHE_IMAGE_H FT_CACHE_H
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_CACHE_SMALL_BITMAPS_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * `small bitmaps' API of the FreeType~2 cache sub-system.
+ *
+ * It is used to define a cache for small glyph bitmaps in a relatively
+ * memory-efficient way. You can also use the API defined in
+ * @FT_CACHE_IMAGE_H if you want to cache arbitrary glyph images,
+ * including scalable outlines.
+ *
+ * This macro is deprecated. Simply include @FT_CACHE_H to have all
+ * small bitmaps-related cache declarations.
+ *
+ */
+#define FT_CACHE_SMALL_BITMAPS_H FT_CACHE_H
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_CACHE_CHARMAP_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * `charmap' API of the FreeType~2 cache sub-system.
+ *
+ * This macro is deprecated. Simply include @FT_CACHE_H to have all
+ * charmap-based cache declarations.
+ *
+ */
+#define FT_CACHE_CHARMAP_H FT_CACHE_H
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_MAC_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * Macintosh-specific FreeType~2 API. The latter is used to access
+ * fonts embedded in resource forks.
+ *
+ * This header file must be explicitly included by client applications
+ * compiled on the Mac (note that the base API still works though).
+ *
+ */
+#define FT_MAC_H <freetype/ftmac.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_MULTIPLE_MASTERS_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * optional multiple-masters management API of FreeType~2.
+ *
+ */
+#define FT_MULTIPLE_MASTERS_H <freetype/ftmm.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_SFNT_NAMES_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * optional FreeType~2 API which accesses embedded `name' strings in
+ * SFNT-based font formats (i.e., TrueType and OpenType).
+ *
+ */
+#define FT_SFNT_NAMES_H <freetype/ftsnames.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_OPENTYPE_VALIDATE_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * optional FreeType~2 API which validates OpenType tables (BASE, GDEF,
+ * GPOS, GSUB, JSTF).
+ *
+ */
+#define FT_OPENTYPE_VALIDATE_H <freetype/ftotval.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_GX_VALIDATE_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * optional FreeType~2 API which validates TrueTypeGX/AAT tables (feat,
+ * mort, morx, bsln, just, kern, opbd, trak, prop).
+ *
+ */
+#define FT_GX_VALIDATE_H <freetype/ftgxval.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_PFR_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * FreeType~2 API which accesses PFR-specific data.
+ *
+ */
+#define FT_PFR_H <freetype/ftpfr.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_STROKER_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * FreeType~2 API which provides functions to stroke outline paths.
+ */
+#define FT_STROKER_H <freetype/ftstroke.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_SYNTHESIS_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * FreeType~2 API which performs artificial obliquing and emboldening.
+ */
+#define FT_SYNTHESIS_H <freetype/ftsynth.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_FONT_FORMATS_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * FreeType~2 API which provides functions specific to font formats.
+ */
+#define FT_FONT_FORMATS_H <freetype/ftfntfmt.h>
+
+ /* deprecated */
+#define FT_XFREE86_H FT_FONT_FORMATS_H
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_TRIGONOMETRY_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * FreeType~2 API which performs trigonometric computations (e.g.,
+ * cosines and arc tangents).
+ */
+#define FT_TRIGONOMETRY_H <freetype/fttrigon.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_LCD_FILTER_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * FreeType~2 API which performs color filtering for subpixel rendering.
+ */
+#define FT_LCD_FILTER_H <freetype/ftlcdfil.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_UNPATENTED_HINTING_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * FreeType~2 API which performs color filtering for subpixel rendering.
+ */
+#define FT_UNPATENTED_HINTING_H <freetype/ttunpat.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_INCREMENTAL_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * FreeType~2 API which performs color filtering for subpixel rendering.
+ */
+#define FT_INCREMENTAL_H <freetype/ftincrem.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_GASP_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * FreeType~2 API which returns entries from the TrueType GASP table.
+ */
+#define FT_GASP_H <freetype/ftgasp.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_ADVANCES_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * FreeType~2 API which returns individual and ranged glyph advances.
+ */
+#define FT_ADVANCES_H <freetype/ftadvanc.h>
+
+
+ /* */
+
+#define FT_ERROR_DEFINITIONS_H <freetype/fterrdef.h>
+
+
+ /* The internals of the cache sub-system are no longer exposed. We */
+ /* default to FT_CACHE_H at the moment just in case, but we know of */
+ /* no rogue client that uses them. */
+ /* */
+#define FT_CACHE_MANAGER_H <freetype/ftcache.h>
+#define FT_CACHE_INTERNAL_MRU_H <freetype/ftcache.h>
+#define FT_CACHE_INTERNAL_MANAGER_H <freetype/ftcache.h>
+#define FT_CACHE_INTERNAL_CACHE_H <freetype/ftcache.h>
+#define FT_CACHE_INTERNAL_GLYPH_H <freetype/ftcache.h>
+#define FT_CACHE_INTERNAL_IMAGE_H <freetype/ftcache.h>
+#define FT_CACHE_INTERNAL_SBITS_H <freetype/ftcache.h>
+
+
+#define FT_INCREMENTAL_H <freetype/ftincrem.h>
+
+#define FT_TRUETYPE_UNPATENTED_H <freetype/ttunpat.h>
+
+
+ /*
+ * Include internal headers definitions from <internal/...>
+ * only when building the library.
+ */
+#ifdef FT2_BUILD_LIBRARY
+#define FT_INTERNAL_INTERNAL_H <freetype/internal/internal.h>
+#include FT_INTERNAL_INTERNAL_H
+#endif /* FT2_BUILD_LIBRARY */
+
+
+#endif /* __FT2_BUILD_H__ */
+
+
+/* END */
diff --git a/freetype/include/freetype/config/ftmodule.h b/freetype/include/freetype/config/ftmodule.h
new file mode 100644
index 0000000..e145790
--- /dev/null
+++ b/freetype/include/freetype/config/ftmodule.h
@@ -0,0 +1,24 @@
+/*
+ * This file registers the FreeType modules compiled into the library.
+ *
+ * If you use GNU make, this file IS NOT USED! Instead, it is created in
+ * the objects directory (normally `<topdir>/objs/') based on information
+ * from `<topdir>/modules.cfg'.
+ *
+ * Please read `docs/INSTALL.ANY' and `docs/CUSTOMIZE' how to compile
+ * FreeType without GNU make.
+ *
+ */
+
+FT_USE_MODULE( FT_Module_Class, autofit_module_class )
+FT_USE_MODULE( FT_Driver_ClassRec, tt_driver_class )
+FT_USE_MODULE( FT_Driver_ClassRec, cff_driver_class )
+FT_USE_MODULE( FT_Module_Class, psnames_module_class )
+FT_USE_MODULE( FT_Module_Class, pshinter_module_class )
+FT_USE_MODULE( FT_Renderer_Class, ft_raster1_renderer_class )
+FT_USE_MODULE( FT_Module_Class, sfnt_module_class )
+FT_USE_MODULE( FT_Renderer_Class, ft_smooth_renderer_class )
+FT_USE_MODULE( FT_Renderer_Class, ft_smooth_lcd_renderer_class )
+FT_USE_MODULE( FT_Renderer_Class, ft_smooth_lcdv_renderer_class )
+
+/* EOF */
diff --git a/freetype/include/freetype/config/ftoption.h b/freetype/include/freetype/config/ftoption.h
new file mode 100644
index 0000000..3819586
--- /dev/null
+++ b/freetype/include/freetype/config/ftoption.h
@@ -0,0 +1,904 @@
+/***************************************************************************/
+/* */
+/* ftoption.h */
+/* */
+/* User-selectable configuration macros (specification only). */
+/* */
+/* Copyright 1996-2015 by */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+
+#ifndef __FTOPTION_H__
+#define __FTOPTION_H__
+
+
+#include <ft2build.h>
+
+
+FT_BEGIN_HEADER
+
+ /*************************************************************************/
+ /* */
+ /* USER-SELECTABLE CONFIGURATION MACROS */
+ /* */
+ /* This file contains the default configuration macro definitions for */
+ /* a standard build of the FreeType library. There are three ways to */
+ /* use this file to build project-specific versions of the library: */
+ /* */
+ /* - You can modify this file by hand, but this is not recommended in */
+ /* cases where you would like to build several versions of the */
+ /* library from a single source directory. */
+ /* */
+ /* - You can put a copy of this file in your build directory, more */
+ /* precisely in `$BUILD/freetype/config/ftoption.h', where `$BUILD' */
+ /* is the name of a directory that is included _before_ the FreeType */
+ /* include path during compilation. */
+ /* */
+ /* The default FreeType Makefiles and Jamfiles use the build */
+ /* directory `builds/<system>' by default, but you can easily change */
+ /* that for your own projects. */
+ /* */
+ /* - Copy the file <ft2build.h> to `$BUILD/ft2build.h' and modify it */
+ /* slightly to pre-define the macro FT_CONFIG_OPTIONS_H used to */
+ /* locate this file during the build. For example, */
+ /* */
+ /* #define FT_CONFIG_OPTIONS_H <myftoptions.h> */
+ /* #include <freetype/config/ftheader.h> */
+ /* */
+ /* will use `$BUILD/myftoptions.h' instead of this file for macro */
+ /* definitions. */
+ /* */
+ /* Note also that you can similarly pre-define the macro */
+ /* FT_CONFIG_MODULES_H used to locate the file listing of the modules */
+ /* that are statically linked to the library at compile time. By */
+ /* default, this file is <freetype/config/ftmodule.h>. */
+ /* */
+ /* We highly recommend using the third method whenever possible. */
+ /* */
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /*************************************************************************/
+ /**** ****/
+ /**** G E N E R A L F R E E T Y P E 2 C O N F I G U R A T I O N ****/
+ /**** ****/
+ /*************************************************************************/
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* Uncomment the line below if you want to activate sub-pixel rendering */
+ /* (a.k.a. LCD rendering, or ClearType) in this build of the library. */
+ /* */
+ /* Note that this feature is covered by several Microsoft patents */
+ /* and should not be activated in any default build of the library. */
+ /* */
+ /* This macro has no impact on the FreeType API, only on its */
+ /* _implementation_. For example, using FT_RENDER_MODE_LCD when calling */
+ /* FT_Render_Glyph still generates a bitmap that is 3 times wider than */
+ /* the original size in case this macro isn't defined; however, each */
+ /* triplet of subpixels has R=G=B. */
+ /* */
+ /* This is done to allow FreeType clients to run unmodified, forcing */
+ /* them to display normal gray-level anti-aliased glyphs. */
+ /* */
+/* #define FT_CONFIG_OPTION_SUBPIXEL_RENDERING */
+
+
+ /*************************************************************************/
+ /* */
+ /* Many compilers provide a non-ANSI 64-bit data type that can be used */
+ /* by FreeType to speed up some computations. However, this will create */
+ /* some problems when compiling the library in strict ANSI mode. */
+ /* */
+ /* For this reason, the use of 64-bit integers is normally disabled when */
+ /* the __STDC__ macro is defined. You can however disable this by */
+ /* defining the macro FT_CONFIG_OPTION_FORCE_INT64 here. */
+ /* */
+ /* For most compilers, this will only create compilation warnings when */
+ /* building the library. */
+ /* */
+ /* ObNote: The compiler-specific 64-bit integers are detected in the */
+ /* file `ftconfig.h' either statically or through the */
+ /* `configure' script on supported platforms. */
+ /* */
+#undef FT_CONFIG_OPTION_FORCE_INT64
+
+
+ /*************************************************************************/
+ /* */
+ /* If this macro is defined, do not try to use an assembler version of */
+ /* performance-critical functions (e.g. FT_MulFix). You should only do */
+ /* that to verify that the assembler function works properly, or to */
+ /* execute benchmark tests of the various implementations. */
+/* #define FT_CONFIG_OPTION_NO_ASSEMBLER */
+
+
+ /*************************************************************************/
+ /* */
+ /* If this macro is defined, try to use an inlined assembler version of */
+ /* the `FT_MulFix' function, which is a `hotspot' when loading and */
+ /* hinting glyphs, and which should be executed as fast as possible. */
+ /* */
+ /* Note that if your compiler or CPU is not supported, this will default */
+ /* to the standard and portable implementation found in `ftcalc.c'. */
+ /* */
+#define FT_CONFIG_OPTION_INLINE_MULFIX
+
+
+ /*************************************************************************/
+ /* */
+ /* LZW-compressed file support. */
+ /* */
+ /* FreeType now handles font files that have been compressed with the */
+ /* `compress' program. This is mostly used to parse many of the PCF */
+ /* files that come with various X11 distributions. The implementation */
+ /* uses NetBSD's `zopen' to partially uncompress the file on the fly */
+ /* (see src/lzw/ftgzip.c). */
+ /* */
+ /* Define this macro if you want to enable this `feature'. */
+ /* */
+#define FT_CONFIG_OPTION_USE_LZW
+
+
+ /*************************************************************************/
+ /* */
+ /* Gzip-compressed file support. */
+ /* */
+ /* FreeType now handles font files that have been compressed with the */
+ /* `gzip' program. This is mostly used to parse many of the PCF files */
+ /* that come with XFree86. The implementation uses `zlib' to */
+ /* partially uncompress the file on the fly (see src/gzip/ftgzip.c). */
+ /* */
+ /* Define this macro if you want to enable this `feature'. See also */
+ /* the macro FT_CONFIG_OPTION_SYSTEM_ZLIB below. */
+ /* */
+#define FT_CONFIG_OPTION_USE_ZLIB
+
+
+ /*************************************************************************/
+ /* */
+ /* ZLib library selection */
+ /* */
+ /* This macro is only used when FT_CONFIG_OPTION_USE_ZLIB is defined. */
+ /* It allows FreeType's `ftgzip' component to link to the system's */
+ /* installation of the ZLib library. This is useful on systems like */
+ /* Unix or VMS where it generally is already available. */
+ /* */
+ /* If you let it undefined, the component will use its own copy */
+ /* of the zlib sources instead. These have been modified to be */
+ /* included directly within the component and *not* export external */
+ /* function names. This allows you to link any program with FreeType */
+ /* _and_ ZLib without linking conflicts. */
+ /* */
+ /* Do not #undef this macro here since the build system might define */
+ /* it for certain configurations only. */
+ /* */
+/* #define FT_CONFIG_OPTION_SYSTEM_ZLIB */
+
+
+ /*************************************************************************/
+ /* */
+ /* Bzip2-compressed file support. */
+ /* */
+ /* FreeType now handles font files that have been compressed with the */
+ /* `bzip2' program. This is mostly used to parse many of the PCF */
+ /* files that come with XFree86. The implementation uses `libbz2' to */
+ /* partially uncompress the file on the fly (see src/bzip2/ftbzip2.c). */
+ /* Contrary to gzip, bzip2 currently is not included and need to use */
+ /* the system available bzip2 implementation. */
+ /* */
+ /* Define this macro if you want to enable this `feature'. */
+ /* */
+/* #define FT_CONFIG_OPTION_USE_BZIP2 */
+
+
+ /*************************************************************************/
+ /* */
+ /* Define to disable the use of file stream functions and types, FILE, */
+ /* fopen() etc. Enables the use of smaller system libraries on embedded */
+ /* systems that have multiple system libraries, some with or without */
+ /* file stream support, in the cases where file stream support is not */
+ /* necessary such as memory loading of font files. */
+ /* */
+/* #define FT_CONFIG_OPTION_DISABLE_STREAM_SUPPORT */
+
+
+ /*************************************************************************/
+ /* */
+ /* PNG bitmap support. */
+ /* */
+ /* FreeType now handles loading color bitmap glyphs in the PNG format. */
+ /* This requires help from the external libpng library. Uncompressed */
+ /* color bitmaps do not need any external libraries and will be */
+ /* supported regardless of this configuration. */
+ /* */
+ /* Define this macro if you want to enable this `feature'. */
+ /* */
+#define FT_CONFIG_OPTION_USE_PNG
+
+
+ /*************************************************************************/
+ /* */
+ /* HarfBuzz support. */
+ /* */
+ /* FreeType uses the HarfBuzz library to improve auto-hinting of */
+ /* OpenType fonts. If available, many glyphs not directly addressable */
+ /* by a font's character map will be hinted also. */
+ /* */
+ /* Define this macro if you want to enable this `feature'. */
+ /* */
+/* #define FT_CONFIG_OPTION_USE_HARFBUZZ */
+
+
+ /*************************************************************************/
+ /* */
+ /* DLL export compilation */
+ /* */
+ /* When compiling FreeType as a DLL, some systems/compilers need a */
+ /* special keyword in front OR after the return type of function */
+ /* declarations. */
+ /* */
+ /* Two macros are used within the FreeType source code to define */
+ /* exported library functions: FT_EXPORT and FT_EXPORT_DEF. */
+ /* */
+ /* FT_EXPORT( return_type ) */
+ /* */
+ /* is used in a function declaration, as in */
+ /* */
+ /* FT_EXPORT( FT_Error ) */
+ /* FT_Init_FreeType( FT_Library* alibrary ); */
+ /* */
+ /* */
+ /* FT_EXPORT_DEF( return_type ) */
+ /* */
+ /* is used in a function definition, as in */
+ /* */
+ /* FT_EXPORT_DEF( FT_Error ) */
+ /* FT_Init_FreeType( FT_Library* alibrary ) */
+ /* { */
+ /* ... some code ... */
+ /* return FT_Err_Ok; */
+ /* } */
+ /* */
+ /* You can provide your own implementation of FT_EXPORT and */
+ /* FT_EXPORT_DEF here if you want. If you leave them undefined, they */
+ /* will be later automatically defined as `extern return_type' to */
+ /* allow normal compilation. */
+ /* */
+ /* Do not #undef these macros here since the build system might define */
+ /* them for certain configurations only. */
+ /* */
+/* #define FT_EXPORT(x) extern x */
+/* #define FT_EXPORT_DEF(x) x */
+
+
+ /*************************************************************************/
+ /* */
+ /* Glyph Postscript Names handling */
+ /* */
+ /* By default, FreeType 2 is compiled with the `psnames' module. This */
+ /* module is in charge of converting a glyph name string into a */
+ /* Unicode value, or return a Macintosh standard glyph name for the */
+ /* use with the TrueType `post' table. */
+ /* */
+ /* Undefine this macro if you do not want `psnames' compiled in your */
+ /* build of FreeType. This has the following effects: */
+ /* */
+ /* - The TrueType driver will provide its own set of glyph names, */
+ /* if you build it to support postscript names in the TrueType */
+ /* `post' table. */
+ /* */
+ /* - The Type 1 driver will not be able to synthesize a Unicode */
+ /* charmap out of the glyphs found in the fonts. */
+ /* */
+ /* You would normally undefine this configuration macro when building */
+ /* a version of FreeType that doesn't contain a Type 1 or CFF driver. */
+ /* */
+#define FT_CONFIG_OPTION_POSTSCRIPT_NAMES
+
+
+ /*************************************************************************/
+ /* */
+ /* Postscript Names to Unicode Values support */
+ /* */
+ /* By default, FreeType 2 is built with the `PSNames' module compiled */
+ /* in. Among other things, the module is used to convert a glyph name */
+ /* into a Unicode value. This is especially useful in order to */
+ /* synthesize on the fly a Unicode charmap from the CFF/Type 1 driver */
+ /* through a big table named the `Adobe Glyph List' (AGL). */
+ /* */
+ /* Undefine this macro if you do not want the Adobe Glyph List */
+ /* compiled in your `PSNames' module. The Type 1 driver will not be */
+ /* able to synthesize a Unicode charmap out of the glyphs found in the */
+ /* fonts. */
+ /* */
+#define FT_CONFIG_OPTION_ADOBE_GLYPH_LIST
+
+
+ /*************************************************************************/
+ /* */
+ /* Support for Mac fonts */
+ /* */
+ /* Define this macro if you want support for outline fonts in Mac */
+ /* format (mac dfont, mac resource, macbinary containing a mac */
+ /* resource) on non-Mac platforms. */
+ /* */
+ /* Note that the `FOND' resource isn't checked. */
+ /* */
+#define FT_CONFIG_OPTION_MAC_FONTS
+
+
+ /*************************************************************************/
+ /* */
+ /* Guessing methods to access embedded resource forks */
+ /* */
+ /* Enable extra Mac fonts support on non-Mac platforms (e.g. */
+ /* GNU/Linux). */
+ /* */
+ /* Resource forks which include fonts data are stored sometimes in */
+ /* locations which users or developers don't expected. In some cases, */
+ /* resource forks start with some offset from the head of a file. In */
+ /* other cases, the actual resource fork is stored in file different */
+ /* from what the user specifies. If this option is activated, */
+ /* FreeType tries to guess whether such offsets or different file */
+ /* names must be used. */
+ /* */
+ /* Note that normal, direct access of resource forks is controlled via */
+ /* the FT_CONFIG_OPTION_MAC_FONTS option. */
+ /* */
+#ifdef FT_CONFIG_OPTION_MAC_FONTS
+#define FT_CONFIG_OPTION_GUESSING_EMBEDDED_RFORK
+#endif
+
+
+ /*************************************************************************/
+ /* */
+ /* Allow the use of FT_Incremental_Interface to load typefaces that */
+ /* contain no glyph data, but supply it via a callback function. */
+ /* This is required by clients supporting document formats which */
+ /* supply font data incrementally as the document is parsed, such */
+ /* as the Ghostscript interpreter for the PostScript language. */
+ /* */
+/* #define FT_CONFIG_OPTION_INCREMENTAL */
+
+
+ /*************************************************************************/
+ /* */
+ /* The size in bytes of the render pool used by the scan-line converter */
+ /* to do all of its work. */
+ /* */
+#define FT_RENDER_POOL_SIZE 16384L
+
+
+ /*************************************************************************/
+ /* */
+ /* FT_MAX_MODULES */
+ /* */
+ /* The maximum number of modules that can be registered in a single */
+ /* FreeType library object. 32 is the default. */
+ /* */
+#define FT_MAX_MODULES 32
+
+
+ /*************************************************************************/
+ /* */
+ /* Debug level */
+ /* */
+ /* FreeType can be compiled in debug or trace mode. In debug mode, */
+ /* errors are reported through the `ftdebug' component. In trace */
+ /* mode, additional messages are sent to the standard output during */
+ /* execution. */
+ /* */
+ /* Define FT_DEBUG_LEVEL_ERROR to build the library in debug mode. */
+ /* Define FT_DEBUG_LEVEL_TRACE to build it in trace mode. */
+ /* */
+ /* Don't define any of these macros to compile in `release' mode! */
+ /* */
+ /* Do not #undef these macros here since the build system might define */
+ /* them for certain configurations only. */
+ /* */
+/* #define FT_DEBUG_LEVEL_ERROR */
+/* #define FT_DEBUG_LEVEL_TRACE */
+
+
+ /*************************************************************************/
+ /* */
+ /* Autofitter debugging */
+ /* */
+ /* If FT_DEBUG_AUTOFIT is defined, FreeType provides some means to */
+ /* control the autofitter behaviour for debugging purposes with global */
+ /* boolean variables (consequently, you should *never* enable this */
+ /* while compiling in `release' mode): */
+ /* */
+ /* _af_debug_disable_horz_hints */
+ /* _af_debug_disable_vert_hints */
+ /* _af_debug_disable_blue_hints */
+ /* */
+ /* Additionally, the following functions provide dumps of various */
+ /* internal autofit structures to stdout (using `printf'): */
+ /* */
+ /* af_glyph_hints_dump_points */
+ /* af_glyph_hints_dump_segments */
+ /* af_glyph_hints_dump_edges */
+ /* af_glyph_hints_get_num_segments */
+ /* af_glyph_hints_get_segment_offset */
+ /* */
+ /* As an argument, they use another global variable: */
+ /* */
+ /* _af_debug_hints */
+ /* */
+ /* Please have a look at the `ftgrid' demo program to see how those */
+ /* variables and macros should be used. */
+ /* */
+ /* Do not #undef these macros here since the build system might define */
+ /* them for certain configurations only. */
+ /* */
+/* #define FT_DEBUG_AUTOFIT */
+
+
+ /*************************************************************************/
+ /* */
+ /* Memory Debugging */
+ /* */
+ /* FreeType now comes with an integrated memory debugger that is */
+ /* capable of detecting simple errors like memory leaks or double */
+ /* deletes. To compile it within your build of the library, you */
+ /* should define FT_DEBUG_MEMORY here. */
+ /* */
+ /* Note that the memory debugger is only activated at runtime when */
+ /* when the _environment_ variable `FT2_DEBUG_MEMORY' is defined also! */
+ /* */
+ /* Do not #undef this macro here since the build system might define */
+ /* it for certain configurations only. */
+ /* */
+/* #define FT_DEBUG_MEMORY */
+
+
+ /*************************************************************************/
+ /* */
+ /* Module errors */
+ /* */
+ /* If this macro is set (which is _not_ the default), the higher byte */
+ /* of an error code gives the module in which the error has occurred, */
+ /* while the lower byte is the real error code. */
+ /* */
+ /* Setting this macro makes sense for debugging purposes only, since */
+ /* it would break source compatibility of certain programs that use */
+ /* FreeType 2. */
+ /* */
+ /* More details can be found in the files ftmoderr.h and fterrors.h. */
+ /* */
+#undef FT_CONFIG_OPTION_USE_MODULE_ERRORS
+
+
+ /*************************************************************************/
+ /* */
+ /* Position Independent Code */
+ /* */
+ /* If this macro is set (which is _not_ the default), FreeType2 will */
+ /* avoid creating constants that require address fixups. Instead the */
+ /* constants will be moved into a struct and additional intialization */
+ /* code will be used. */
+ /* */
+ /* Setting this macro is needed for systems that prohibit address */
+ /* fixups, such as BREW. */
+ /* */
+/* #define FT_CONFIG_OPTION_PIC */
+
+
+ /*************************************************************************/
+ /*************************************************************************/
+ /**** ****/
+ /**** S F N T D R I V E R C O N F I G U R A T I O N ****/
+ /**** ****/
+ /*************************************************************************/
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* Define TT_CONFIG_OPTION_EMBEDDED_BITMAPS if you want to support */
+ /* embedded bitmaps in all formats using the SFNT module (namely */
+ /* TrueType & OpenType). */
+ /* */
+#define TT_CONFIG_OPTION_EMBEDDED_BITMAPS
+
+
+ /*************************************************************************/
+ /* */
+ /* Define TT_CONFIG_OPTION_POSTSCRIPT_NAMES if you want to be able to */
+ /* load and enumerate the glyph Postscript names in a TrueType or */
+ /* OpenType file. */
+ /* */
+ /* Note that when you do not compile the `PSNames' module by undefining */
+ /* the above FT_CONFIG_OPTION_POSTSCRIPT_NAMES, the `sfnt' module will */
+ /* contain additional code used to read the PS Names table from a font. */
+ /* */
+ /* (By default, the module uses `PSNames' to extract glyph names.) */
+ /* */
+#define TT_CONFIG_OPTION_POSTSCRIPT_NAMES
+
+
+ /*************************************************************************/
+ /* */
+ /* Define TT_CONFIG_OPTION_SFNT_NAMES if your applications need to */
+ /* access the internal name table in a SFNT-based format like TrueType */
+ /* or OpenType. The name table contains various strings used to */
+ /* describe the font, like family name, copyright, version, etc. It */
+ /* does not contain any glyph name though. */
+ /* */
+ /* Accessing SFNT names is done through the functions declared in */
+ /* `ftsnames.h'. */
+ /* */
+#define TT_CONFIG_OPTION_SFNT_NAMES
+
+
+ /*************************************************************************/
+ /* */
+ /* TrueType CMap support */
+ /* */
+ /* Here you can fine-tune which TrueType CMap table format shall be */
+ /* supported. */
+#define TT_CONFIG_CMAP_FORMAT_0
+#define TT_CONFIG_CMAP_FORMAT_2
+#define TT_CONFIG_CMAP_FORMAT_4
+#define TT_CONFIG_CMAP_FORMAT_6
+#define TT_CONFIG_CMAP_FORMAT_8
+#define TT_CONFIG_CMAP_FORMAT_10
+#define TT_CONFIG_CMAP_FORMAT_12
+#define TT_CONFIG_CMAP_FORMAT_13
+#define TT_CONFIG_CMAP_FORMAT_14
+
+
+ /*************************************************************************/
+ /*************************************************************************/
+ /**** ****/
+ /**** T R U E T Y P E D R I V E R C O N F I G U R A T I O N ****/
+ /**** ****/
+ /*************************************************************************/
+ /*************************************************************************/
+
+ /*************************************************************************/
+ /* */
+ /* Define TT_CONFIG_OPTION_BYTECODE_INTERPRETER if you want to compile */
+ /* a bytecode interpreter in the TrueType driver. */
+ /* */
+ /* By undefining this, you will only compile the code necessary to load */
+ /* TrueType glyphs without hinting. */
+ /* */
+ /* Do not #undef this macro here, since the build system might */
+ /* define it for certain configurations only. */
+ /* */
+#define TT_CONFIG_OPTION_BYTECODE_INTERPRETER
+
+
+ /*************************************************************************/
+ /* */
+ /* Define TT_CONFIG_OPTION_SUBPIXEL_HINTING if you want to compile */
+ /* EXPERIMENTAL subpixel hinting support into the TrueType driver. This */
+ /* replaces the native TrueType hinting mechanism when anything but */
+ /* FT_RENDER_MODE_MONO is requested. */
+ /* */
+ /* Enabling this causes the TrueType driver to ignore instructions under */
+ /* certain conditions. This is done in accordance with the guide here, */
+ /* with some minor differences: */
+ /* */
+ /* http://www.microsoft.com/typography/cleartype/truetypecleartype.aspx */
+ /* */
+ /* By undefining this, you only compile the code necessary to hint */
+ /* TrueType glyphs with native TT hinting. */
+ /* */
+ /* This option requires TT_CONFIG_OPTION_BYTECODE_INTERPRETER to be */
+ /* defined. */
+ /* */
+/* #define TT_CONFIG_OPTION_SUBPIXEL_HINTING */
+
+
+ /*************************************************************************/
+ /* */
+ /* If you define TT_CONFIG_OPTION_UNPATENTED_HINTING, a special version */
+ /* of the TrueType bytecode interpreter is used that doesn't implement */
+ /* any of the patented opcodes and algorithms. The patents related to */
+ /* TrueType hinting have expired worldwide since May 2010; this option */
+ /* is now deprecated. */
+ /* */
+ /* Note that the TT_CONFIG_OPTION_UNPATENTED_HINTING macro is *ignored* */
+ /* if you define TT_CONFIG_OPTION_BYTECODE_INTERPRETER; in other words, */
+ /* either define TT_CONFIG_OPTION_BYTECODE_INTERPRETER or */
+ /* TT_CONFIG_OPTION_UNPATENTED_HINTING but not both at the same time. */
+ /* */
+ /* This macro is only useful for a small number of font files (mostly */
+ /* for Asian scripts) that require bytecode interpretation to properly */
+ /* load glyphs. For all other fonts, this produces unpleasant results, */
+ /* thus the unpatented interpreter is never used to load glyphs from */
+ /* TrueType fonts unless one of the following two options is used. */
+ /* */
+ /* - The unpatented interpreter is explicitly activated by the user */
+ /* through the FT_PARAM_TAG_UNPATENTED_HINTING parameter tag */
+ /* when opening the FT_Face. */
+ /* */
+ /* - FreeType detects that the FT_Face corresponds to one of the */
+ /* `trick' fonts (e.g., `Mingliu') it knows about. The font engine */
+ /* contains a hard-coded list of font names and other matching */
+ /* parameters (see function `tt_face_init' in file */
+ /* `src/truetype/ttobjs.c'). */
+ /* */
+ /* Here a sample code snippet for using FT_PARAM_TAG_UNPATENTED_HINTING. */
+ /* */
+ /* { */
+ /* FT_Parameter parameter; */
+ /* FT_Open_Args open_args; */
+ /* */
+ /* */
+ /* parameter.tag = FT_PARAM_TAG_UNPATENTED_HINTING; */
+ /* */
+ /* open_args.flags = FT_OPEN_PATHNAME | FT_OPEN_PARAMS; */
+ /* open_args.pathname = my_font_pathname; */
+ /* open_args.num_params = 1; */
+ /* open_args.params = ¶meter; */
+ /* */
+ /* error = FT_Open_Face( library, &open_args, index, &face ); */
+ /* ... */
+ /* } */
+ /* */
+/* #define TT_CONFIG_OPTION_UNPATENTED_HINTING */
+
+
+ /*************************************************************************/
+ /* */
+ /* Define TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED to compile the */
+ /* TrueType glyph loader to use Apple's definition of how to handle */
+ /* component offsets in composite glyphs. */
+ /* */
+ /* Apple and MS disagree on the default behavior of component offsets */
+ /* in composites. Apple says that they should be scaled by the scaling */
+ /* factors in the transformation matrix (roughly, it's more complex) */
+ /* while MS says they should not. OpenType defines two bits in the */
+ /* composite flags array which can be used to disambiguate, but old */
+ /* fonts will not have them. */
+ /* */
+ /* http://www.microsoft.com/typography/otspec/glyf.htm */
+ /* https://developer.apple.com/fonts/TrueType-Reference-Manual/RM06/Chap6glyf.html */
+ /* */
+#undef TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED
+
+
+ /*************************************************************************/
+ /* */
+ /* Define TT_CONFIG_OPTION_GX_VAR_SUPPORT if you want to include */
+ /* support for Apple's distortable font technology (fvar, gvar, cvar, */
+ /* and avar tables). This has many similarities to Type 1 Multiple */
+ /* Masters support. */
+ /* */
+#define TT_CONFIG_OPTION_GX_VAR_SUPPORT
+
+
+ /*************************************************************************/
+ /* */
+ /* Define TT_CONFIG_OPTION_BDF if you want to include support for */
+ /* an embedded `BDF ' table within SFNT-based bitmap formats. */
+ /* */
+#define TT_CONFIG_OPTION_BDF
+
+
+ /*************************************************************************/
+ /* */
+ /* Option TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES controls the maximum */
+ /* number of bytecode instructions executed for a single run of the */
+ /* bytecode interpreter, needed to prevent infinite loops. You don't */
+ /* want to change this except for very special situations (e.g., making */
+ /* a library fuzzer spend less time to handle broken fonts). */
+ /* */
+ /* It is not expected that this value is ever modified by a configuring */
+ /* script; instead, it gets surrounded with #ifndef ... #endif so that */
+ /* the value can be set as a preprocessor option on the compiler's */
+ /* command line. */
+ /* */
+#ifndef TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES
+#define TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES 1000000L
+#endif
+
+
+ /*************************************************************************/
+ /*************************************************************************/
+ /**** ****/
+ /**** T Y P E 1 D R I V E R C O N F I G U R A T I O N ****/
+ /**** ****/
+ /*************************************************************************/
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* T1_MAX_DICT_DEPTH is the maximum depth of nest dictionaries and */
+ /* arrays in the Type 1 stream (see t1load.c). A minimum of 4 is */
+ /* required. */
+ /* */
+#define T1_MAX_DICT_DEPTH 5
+
+
+ /*************************************************************************/
+ /* */
+ /* T1_MAX_SUBRS_CALLS details the maximum number of nested sub-routine */
+ /* calls during glyph loading. */
+ /* */
+#define T1_MAX_SUBRS_CALLS 16
+
+
+ /*************************************************************************/
+ /* */
+ /* T1_MAX_CHARSTRING_OPERANDS is the charstring stack's capacity. A */
+ /* minimum of 16 is required. */
+ /* */
+ /* The Chinese font MingTiEG-Medium (CNS 11643 character set) needs 256. */
+ /* */
+#define T1_MAX_CHARSTRINGS_OPERANDS 256
+
+
+ /*************************************************************************/
+ /* */
+ /* Define this configuration macro if you want to prevent the */
+ /* compilation of `t1afm', which is in charge of reading Type 1 AFM */
+ /* files into an existing face. Note that if set, the T1 driver will be */
+ /* unable to produce kerning distances. */
+ /* */
+#undef T1_CONFIG_OPTION_NO_AFM
+
+
+ /*************************************************************************/
+ /* */
+ /* Define this configuration macro if you want to prevent the */
+ /* compilation of the Multiple Masters font support in the Type 1 */
+ /* driver. */
+ /* */
+#undef T1_CONFIG_OPTION_NO_MM_SUPPORT
+
+
+ /*************************************************************************/
+ /*************************************************************************/
+ /**** ****/
+ /**** C F F D R I V E R C O N F I G U R A T I O N ****/
+ /**** ****/
+ /*************************************************************************/
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* Using CFF_CONFIG_OPTION_DARKENING_PARAMETER_{X,Y}{1,2,3,4} it is */
+ /* possible to set up the default values of the four control points that */
+ /* define the stem darkening behaviour of the (new) CFF engine. For */
+ /* more details please read the documentation of the */
+ /* `darkening-parameters' property of the cff driver module (file */
+ /* `ftcffdrv.h'), which allows the control at run-time. */
+ /* */
+ /* Do *not* undefine these macros! */
+ /* */
+#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X1 500
+#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y1 400
+
+#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 1000
+#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y2 275
+
+#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3 1667
+#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y3 275
+
+#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X4 2333
+#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y4 0
+
+
+ /*************************************************************************/
+ /* */
+ /* CFF_CONFIG_OPTION_OLD_ENGINE controls whether the pre-Adobe CFF */
+ /* engine gets compiled into FreeType. If defined, it is possible to */
+ /* switch between the two engines using the `hinting-engine' property of */
+ /* the cff driver module. */
+ /* */
+/* #define CFF_CONFIG_OPTION_OLD_ENGINE */
+
+
+ /*************************************************************************/
+ /*************************************************************************/
+ /**** ****/
+ /**** A U T O F I T M O D U L E C O N F I G U R A T I O N ****/
+ /**** ****/
+ /*************************************************************************/
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* Compile autofit module with CJK (Chinese, Japanese, Korean) script */
+ /* support. */
+ /* */
+#define AF_CONFIG_OPTION_CJK
+
+ /*************************************************************************/
+ /* */
+ /* Compile autofit module with Indic script support. */
+ /* */
+#define AF_CONFIG_OPTION_INDIC
+
+ /*************************************************************************/
+ /* */
+ /* Compile autofit module with warp hinting. The idea of the warping */
+ /* code is to slightly scale and shift a glyph within a single dimension */
+ /* so that as much of its segments are aligned (more or less) on the */
+ /* grid. To find out the optimal scaling and shifting value, various */
+ /* parameter combinations are tried and scored. */
+ /* */
+ /* This experimental option is active only if the rendering mode is */
+ /* FT_RENDER_MODE_LIGHT; you can switch warping on and off with the */
+ /* `warping' property of the auto-hinter (see file `ftautoh.h' for more */
+ /* information; by default it is switched off). */
+ /* */
+/* #define AF_CONFIG_OPTION_USE_WARPER */
+
+ /* */
+
+
+ /*
+ * This macro is obsolete. Support has been removed in FreeType
+ * version 2.5.
+ */
+/* #define FT_CONFIG_OPTION_OLD_INTERNALS */
+
+
+ /*
+ * This macro is defined if either unpatented or native TrueType
+ * hinting is requested by the definitions above.
+ */
+#ifdef TT_CONFIG_OPTION_BYTECODE_INTERPRETER
+#define TT_USE_BYTECODE_INTERPRETER
+#undef TT_CONFIG_OPTION_UNPATENTED_HINTING
+#elif defined TT_CONFIG_OPTION_UNPATENTED_HINTING
+#define TT_USE_BYTECODE_INTERPRETER
+#endif
+
+
+ /*
+ * Check CFF darkening parameters. The checks are the same as in function
+ * `cff_property_set' in file `cffdrivr.c'.
+ */
+#if CFF_CONFIG_OPTION_DARKENING_PARAMETER_X1 < 0 || \
+ CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 < 0 || \
+ CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3 < 0 || \
+ CFF_CONFIG_OPTION_DARKENING_PARAMETER_X4 < 0 || \
+ \
+ CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y1 < 0 || \
+ CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y2 < 0 || \
+ CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y3 < 0 || \
+ CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y4 < 0 || \
+ \
+ CFF_CONFIG_OPTION_DARKENING_PARAMETER_X1 > \
+ CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 || \
+ CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 > \
+ CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3 || \
+ CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3 > \
+ CFF_CONFIG_OPTION_DARKENING_PARAMETER_X4 || \
+ \
+ CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y1 > 500 || \
+ CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y2 > 500 || \
+ CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y3 > 500 || \
+ CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y4 > 500
+#error "Invalid CFF darkening parameters!"
+#endif
+
+FT_END_HEADER
+
+
+#endif /* __FTOPTION_H__ */
+
+
+/* END */
diff --git a/freetype/include/freetype/config/ftstdlib.h b/freetype/include/freetype/config/ftstdlib.h
new file mode 100644
index 0000000..4b471d4
--- /dev/null
+++ b/freetype/include/freetype/config/ftstdlib.h
@@ -0,0 +1,174 @@
+/***************************************************************************/
+/* */
+/* ftstdlib.h */
+/* */
+/* ANSI-specific library and header configuration file (specification */
+/* only). */
+/* */
+/* Copyright 2002-2015 by */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* This file is used to group all #includes to the ANSI C library that */
+ /* FreeType normally requires. It also defines macros to rename the */
+ /* standard functions within the FreeType source code. */
+ /* */
+ /* Load a file which defines __FTSTDLIB_H__ before this one to override */
+ /* it. */
+ /* */
+ /*************************************************************************/
+
+
+#ifndef __FTSTDLIB_H__
+#define __FTSTDLIB_H__
+
+
+#include <stddef.h>
+
+#define ft_ptrdiff_t ptrdiff_t
+
+
+ /**********************************************************************/
+ /* */
+ /* integer limits */
+ /* */
+ /* UINT_MAX and ULONG_MAX are used to automatically compute the size */
+ /* of `int' and `long' in bytes at compile-time. So far, this works */
+ /* for all platforms the library has been tested on. */
+ /* */
+ /* Note that on the extremely rare platforms that do not provide */
+ /* integer types that are _exactly_ 16 and 32 bits wide (e.g. some */
+ /* old Crays where `int' is 36 bits), we do not make any guarantee */
+ /* about the correct behaviour of FT2 with all fonts. */
+ /* */
+ /* In these case, `ftconfig.h' will refuse to compile anyway with a */
+ /* message like `couldn't find 32-bit type' or something similar. */
+ /* */
+ /**********************************************************************/
+
+
+#include <limits.h>
+
+#define FT_CHAR_BIT CHAR_BIT
+#define FT_USHORT_MAX USHRT_MAX
+#define FT_INT_MAX INT_MAX
+#define FT_INT_MIN INT_MIN
+#define FT_UINT_MAX UINT_MAX
+#define FT_LONG_MAX LONG_MAX
+#define FT_ULONG_MAX ULONG_MAX
+
+
+ /**********************************************************************/
+ /* */
+ /* character and string processing */
+ /* */
+ /**********************************************************************/
+
+
+#include <string.h>
+
+#define ft_memchr memchr
+#define ft_memcmp memcmp
+#define ft_memcpy memcpy
+#define ft_memmove memmove
+#define ft_memset memset
+#define ft_strcat strcat
+#define ft_strcmp strcmp
+#define ft_strcpy strcpy
+#define ft_strlen strlen
+#define ft_strncmp strncmp
+#define ft_strncpy strncpy
+#define ft_strrchr strrchr
+#define ft_strstr strstr
+
+
+ /**********************************************************************/
+ /* */
+ /* file handling */
+ /* */
+ /**********************************************************************/
+
+
+#include <stdio.h>
+
+#define FT_FILE FILE
+#define ft_fclose fclose
+#define ft_fopen fopen
+#define ft_fread fread
+#define ft_fseek fseek
+#define ft_ftell ftell
+#define ft_sprintf sprintf
+
+
+ /**********************************************************************/
+ /* */
+ /* sorting */
+ /* */
+ /**********************************************************************/
+
+
+#include <stdlib.h>
+
+#define ft_qsort qsort
+
+
+ /**********************************************************************/
+ /* */
+ /* memory allocation */
+ /* */
+ /**********************************************************************/
+
+
+#define ft_scalloc calloc
+#define ft_sfree free
+#define ft_smalloc malloc
+#define ft_srealloc realloc
+
+
+ /**********************************************************************/
+ /* */
+ /* miscellaneous */
+ /* */
+ /**********************************************************************/
+
+
+#define ft_atol atol
+
+
+ /**********************************************************************/
+ /* */
+ /* execution control */
+ /* */
+ /**********************************************************************/
+
+
+#include <setjmp.h>
+
+#define ft_jmp_buf jmp_buf /* note: this cannot be a typedef since */
+ /* jmp_buf is defined as a macro */
+ /* on certain platforms */
+
+#define ft_longjmp longjmp
+#define ft_setjmp( b ) setjmp( *(ft_jmp_buf*) &(b) ) /* same thing here */
+
+
+ /* the following is only used for debugging purposes, i.e., if */
+ /* FT_DEBUG_LEVEL_ERROR or FT_DEBUG_LEVEL_TRACE are defined */
+
+#include <stdarg.h>
+
+
+#endif /* __FTSTDLIB_H__ */
+
+
+/* END */
diff --git a/freetype/include/freetype/freetype.h b/freetype/include/freetype/freetype.h
new file mode 100644
index 0000000..f68718d
--- /dev/null
+++ b/freetype/include/freetype/freetype.h
@@ -0,0 +1,4284 @@
+/***************************************************************************/
+/* */
+/* freetype.h */
+/* */
+/* FreeType high-level API and common types (specification only). */
+/* */
+/* Copyright 1996-2015 by */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+
+#ifndef __FREETYPE_H__
+#define __FREETYPE_H__
+
+
+#ifndef FT_FREETYPE_H
+#error "`ft2build.h' hasn't been included yet!"
+#error "Please always use macros to include FreeType header files."
+#error "Example:"
+#error " #include <ft2build.h>"
+#error " #include FT_FREETYPE_H"
+#endif
+
+
+#include <ft2build.h>
+#include FT_CONFIG_CONFIG_H
+#include FT_TYPES_H
+#include FT_ERRORS_H
+
+
+FT_BEGIN_HEADER
+
+
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* header_inclusion */
+ /* */
+ /* <Title> */
+ /* FreeType's header inclusion scheme */
+ /* */
+ /* <Abstract> */
+ /* How client applications should include FreeType header files. */
+ /* */
+ /* <Description> */
+ /* To be as flexible as possible (and for historical reasons), */
+ /* FreeType uses a very special inclusion scheme to load header */
+ /* files, for example */
+ /* */
+ /* { */
+ /* #include <ft2build.h> */
+ /* */
+ /* #include FT_FREETYPE_H */
+ /* #include FT_OUTLINE_H */
+ /* } */
+ /* */
+ /* A compiler and its preprocessor only needs an include path to find */
+ /* the file `ft2build.h'; the exact locations and names of the other */
+ /* FreeType header files are hidden by preprocessor macro names, */
+ /* loaded by `ft2build.h'. The API documentation always gives the */
+ /* header macro name needed for a particular function. */
+ /* */
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* user_allocation */
+ /* */
+ /* <Title> */
+ /* User allocation */
+ /* */
+ /* <Abstract> */
+ /* How client applications should allocate FreeType data structures. */
+ /* */
+ /* <Description> */
+ /* FreeType assumes that structures allocated by the user and passed */
+ /* as arguments are zeroed out except for the actual data. In other */
+ /* words, it is recommended to use `calloc' (or variants of it) */
+ /* instead of `malloc' for allocation. */
+ /* */
+ /*************************************************************************/
+
+
+
+ /*************************************************************************/
+ /*************************************************************************/
+ /* */
+ /* B A S I C T Y P E S */
+ /* */
+ /*************************************************************************/
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* base_interface */
+ /* */
+ /* <Title> */
+ /* Base Interface */
+ /* */
+ /* <Abstract> */
+ /* The FreeType~2 base font interface. */
+ /* */
+ /* <Description> */
+ /* This section describes the most important public high-level API */
+ /* functions of FreeType~2. */
+ /* */
+ /* <Order> */
+ /* FT_Library */
+ /* FT_Face */
+ /* FT_Size */
+ /* FT_GlyphSlot */
+ /* FT_CharMap */
+ /* FT_Encoding */
+ /* FT_ENC_TAG */
+ /* */
+ /* FT_FaceRec */
+ /* */
+ /* FT_FACE_FLAG_SCALABLE */
+ /* FT_FACE_FLAG_FIXED_SIZES */
+ /* FT_FACE_FLAG_FIXED_WIDTH */
+ /* FT_FACE_FLAG_HORIZONTAL */
+ /* FT_FACE_FLAG_VERTICAL */
+ /* FT_FACE_FLAG_COLOR */
+ /* FT_FACE_FLAG_SFNT */
+ /* FT_FACE_FLAG_CID_KEYED */
+ /* FT_FACE_FLAG_TRICKY */
+ /* FT_FACE_FLAG_KERNING */
+ /* FT_FACE_FLAG_MULTIPLE_MASTERS */
+ /* FT_FACE_FLAG_GLYPH_NAMES */
+ /* FT_FACE_FLAG_EXTERNAL_STREAM */
+ /* FT_FACE_FLAG_HINTER */
+ /* FT_FACE_FLAG_TRICKY */
+ /* */
+ /* FT_HAS_HORIZONTAL */
+ /* FT_HAS_VERTICAL */
+ /* FT_HAS_KERNING */
+ /* FT_HAS_FIXED_SIZES */
+ /* FT_HAS_GLYPH_NAMES */
+ /* FT_HAS_MULTIPLE_MASTERS */
+ /* FT_HAS_COLOR */
+ /* */
+ /* FT_IS_SFNT */
+ /* FT_IS_SCALABLE */
+ /* FT_IS_FIXED_WIDTH */
+ /* FT_IS_CID_KEYED */
+ /* FT_IS_TRICKY */
+ /* */
+ /* FT_STYLE_FLAG_BOLD */
+ /* FT_STYLE_FLAG_ITALIC */
+ /* */
+ /* FT_SizeRec */
+ /* FT_Size_Metrics */
+ /* */
+ /* FT_GlyphSlotRec */
+ /* FT_Glyph_Metrics */
+ /* FT_SubGlyph */
+ /* */
+ /* FT_Bitmap_Size */
+ /* */
+ /* FT_Init_FreeType */
+ /* FT_Done_FreeType */
+ /* */
+ /* FT_New_Face */
+ /* FT_Done_Face */
+ /* FT_Reference_Face */
+ /* FT_New_Memory_Face */
+ /* FT_Open_Face */
+ /* FT_Open_Args */
+ /* FT_Parameter */
+ /* FT_Attach_File */
+ /* FT_Attach_Stream */
+ /* */
+ /* FT_Set_Char_Size */
+ /* FT_Set_Pixel_Sizes */
+ /* FT_Request_Size */
+ /* FT_Select_Size */
+ /* FT_Size_Request_Type */
+ /* FT_Size_RequestRec */
+ /* FT_Size_Request */
+ /* FT_Set_Transform */
+ /* FT_Load_Glyph */
+ /* FT_Get_Char_Index */
+ /* FT_Get_First_Char */
+ /* FT_Get_Next_Char */
+ /* FT_Get_Name_Index */
+ /* FT_Load_Char */
+ /* */
+ /* FT_OPEN_MEMORY */
+ /* FT_OPEN_STREAM */
+ /* FT_OPEN_PATHNAME */
+ /* FT_OPEN_DRIVER */
+ /* FT_OPEN_PARAMS */
+ /* */
+ /* FT_LOAD_DEFAULT */
+ /* FT_LOAD_RENDER */
+ /* FT_LOAD_MONOCHROME */
+ /* FT_LOAD_LINEAR_DESIGN */
+ /* FT_LOAD_NO_SCALE */
+ /* FT_LOAD_NO_HINTING */
+ /* FT_LOAD_NO_BITMAP */
+ /* FT_LOAD_NO_AUTOHINT */
+ /* FT_LOAD_COLOR */
+ /* */
+ /* FT_LOAD_VERTICAL_LAYOUT */
+ /* FT_LOAD_IGNORE_TRANSFORM */
+ /* FT_LOAD_FORCE_AUTOHINT */
+ /* FT_LOAD_NO_RECURSE */
+ /* FT_LOAD_PEDANTIC */
+ /* */
+ /* FT_LOAD_TARGET_NORMAL */
+ /* FT_LOAD_TARGET_LIGHT */
+ /* FT_LOAD_TARGET_MONO */
+ /* FT_LOAD_TARGET_LCD */
+ /* FT_LOAD_TARGET_LCD_V */
+ /* */
+ /* FT_LOAD_TARGET_MODE */
+ /* */
+ /* FT_Render_Glyph */
+ /* FT_Render_Mode */
+ /* FT_Get_Kerning */
+ /* FT_Kerning_Mode */
+ /* FT_Get_Track_Kerning */
+ /* FT_Get_Glyph_Name */
+ /* FT_Get_Postscript_Name */
+ /* */
+ /* FT_CharMapRec */
+ /* FT_Select_Charmap */
+ /* FT_Set_Charmap */
+ /* FT_Get_Charmap_Index */
+ /* */
+ /* FT_Get_FSType_Flags */
+ /* FT_Get_SubGlyph_Info */
+ /* */
+ /* FT_Face_Internal */
+ /* FT_Size_Internal */
+ /* FT_Slot_Internal */
+ /* */
+ /* FT_FACE_FLAG_XXX */
+ /* FT_STYLE_FLAG_XXX */
+ /* FT_OPEN_XXX */
+ /* FT_LOAD_XXX */
+ /* FT_LOAD_TARGET_XXX */
+ /* FT_SUBGLYPH_FLAG_XXX */
+ /* FT_FSTYPE_XXX */
+ /* */
+ /* FT_HAS_FAST_GLYPHS */
+ /* */
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* <Struct> */
+ /* FT_Glyph_Metrics */
+ /* */
+ /* <Description> */
+ /* A structure used to model the metrics of a single glyph. The */
+ /* values are expressed in 26.6 fractional pixel format; if the flag */
+ /* @FT_LOAD_NO_SCALE has been used while loading the glyph, values */
+ /* are expressed in font units instead. */
+ /* */
+ /* <Fields> */
+ /* width :: */
+ /* The glyph's width. */
+ /* */
+ /* height :: */
+ /* The glyph's height. */
+ /* */
+ /* horiBearingX :: */
+ /* Left side bearing for horizontal layout. */
+ /* */
+ /* horiBearingY :: */
+ /* Top side bearing for horizontal layout. */
+ /* */
+ /* horiAdvance :: */
+ /* Advance width for horizontal layout. */
+ /* */
+ /* vertBearingX :: */
+ /* Left side bearing for vertical layout. */
+ /* */
+ /* vertBearingY :: */
+ /* Top side bearing for vertical layout. Larger positive values */
+ /* mean further below the vertical glyph origin. */
+ /* */
+ /* vertAdvance :: */
+ /* Advance height for vertical layout. Positive values mean the */
+ /* glyph has a positive advance downward. */
+ /* */
+ /* <Note> */
+ /* If not disabled with @FT_LOAD_NO_HINTING, the values represent */
+ /* dimensions of the hinted glyph (in case hinting is applicable). */
+ /* */
+ /* Stroking a glyph with an outside border does not increase */
+ /* `horiAdvance' or `vertAdvance'; you have to manually adjust these */
+ /* values to account for the added width and height. */
+ /* */
+ typedef struct FT_Glyph_Metrics_
+ {
+ FT_Pos width;
+ FT_Pos height;
+
+ FT_Pos horiBearingX;
+ FT_Pos horiBearingY;
+ FT_Pos horiAdvance;
+
+ FT_Pos vertBearingX;
+ FT_Pos vertBearingY;
+ FT_Pos vertAdvance;
+
+ } FT_Glyph_Metrics;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Struct> */
+ /* FT_Bitmap_Size */
+ /* */
+ /* <Description> */
+ /* This structure models the metrics of a bitmap strike (i.e., a set */
+ /* of glyphs for a given point size and resolution) in a bitmap font. */
+ /* It is used for the `available_sizes' field of @FT_Face. */
+ /* */
+ /* <Fields> */
+ /* height :: The vertical distance, in pixels, between two */
+ /* consecutive baselines. It is always positive. */
+ /* */
+ /* width :: The average width, in pixels, of all glyphs in the */
+ /* strike. */
+ /* */
+ /* size :: The nominal size of the strike in 26.6 fractional */
+ /* points. This field is not very useful. */
+ /* */
+ /* x_ppem :: The horizontal ppem (nominal width) in 26.6 fractional */
+ /* pixels. */
+ /* */
+ /* y_ppem :: The vertical ppem (nominal height) in 26.6 fractional */
+ /* pixels. */
+ /* */
+ /* <Note> */
+ /* Windows FNT: */
+ /* The nominal size given in a FNT font is not reliable. Thus when */
+ /* the driver finds it incorrect, it sets `size' to some calculated */
+ /* values and sets `x_ppem' and `y_ppem' to the pixel width and */
+ /* height given in the font, respectively. */
+ /* */
+ /* TrueType embedded bitmaps: */
+ /* `size', `width', and `height' values are not contained in the */
+ /* bitmap strike itself. They are computed from the global font */
+ /* parameters. */
+ /* */
+ typedef struct FT_Bitmap_Size_
+ {
+ FT_Short height;
+ FT_Short width;
+
+ FT_Pos size;
+
+ FT_Pos x_ppem;
+ FT_Pos y_ppem;
+
+ } FT_Bitmap_Size;
+
+
+ /*************************************************************************/
+ /*************************************************************************/
+ /* */
+ /* O B J E C T C L A S S E S */
+ /* */
+ /*************************************************************************/
+ /*************************************************************************/
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_Library */
+ /* */
+ /* <Description> */
+ /* A handle to a FreeType library instance. Each `library' is */
+ /* completely independent from the others; it is the `root' of a set */
+ /* of objects like fonts, faces, sizes, etc. */
+ /* */
+ /* It also embeds a memory manager (see @FT_Memory), as well as a */
+ /* scan-line converter object (see @FT_Raster). */
+ /* */
+ /* In multi-threaded applications it is easiest to use one */
+ /* `FT_Library' object per thread. In case this is too cumbersome, */
+ /* a single `FT_Library' object across threads is possible also */
+ /* (since FreeType version 2.5.6), as long as a mutex lock is used */
+ /* around @FT_New_Face and @FT_Done_Face. */
+ /* */
+ /* <Note> */
+ /* Library objects are normally created by @FT_Init_FreeType, and */
+ /* destroyed with @FT_Done_FreeType. If you need reference-counting */
+ /* (cf. @FT_Reference_Library), use @FT_New_Library and */
+ /* @FT_Done_Library. */
+ /* */
+ typedef struct FT_LibraryRec_ *FT_Library;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* module_management */
+ /* */
+ /*************************************************************************/
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_Module */
+ /* */
+ /* <Description> */
+ /* A handle to a given FreeType module object. Each module can be a */
+ /* font driver, a renderer, or anything else that provides services */
+ /* to the formers. */
+ /* */
+ typedef struct FT_ModuleRec_* FT_Module;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_Driver */
+ /* */
+ /* <Description> */
+ /* A handle to a given FreeType font driver object. Each font driver */
+ /* is a special module capable of creating faces from font files. */
+ /* */
+ typedef struct FT_DriverRec_* FT_Driver;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_Renderer */
+ /* */
+ /* <Description> */
+ /* A handle to a given FreeType renderer. A renderer is a special */
+ /* module in charge of converting a glyph image to a bitmap, when */
+ /* necessary. Each renderer supports a given glyph image format, and */
+ /* one or more target surface depths. */
+ /* */
+ typedef struct FT_RendererRec_* FT_Renderer;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* base_interface */
+ /* */
+ /*************************************************************************/
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_Face */
+ /* */
+ /* <Description> */
+ /* A handle to a given typographic face object. A face object models */
+ /* a given typeface, in a given style. */
+ /* */
+ /* <Note> */
+ /* Each face object also owns a single @FT_GlyphSlot object, as well */
+ /* as one or more @FT_Size objects. */
+ /* */
+ /* Use @FT_New_Face or @FT_Open_Face to create a new face object from */
+ /* a given filepathname or a custom input stream. */
+ /* */
+ /* Use @FT_Done_Face to destroy it (along with its slot and sizes). */
+ /* */
+ /* An `FT_Face' object can only be safely used from one thread at a */
+ /* time. Similarly, creation and destruction of `FT_Face' with the */
+ /* same @FT_Library object can only be done from one thread at a */
+ /* time. On the other hand, functions like @FT_Load_Glyph and its */
+ /* siblings are thread-safe and do not need the lock to be held as */
+ /* long as the same `FT_Face' object is not used from multiple */
+ /* threads at the same time. */
+ /* */
+ /* <Also> */
+ /* See @FT_FaceRec for the publicly accessible fields of a given face */
+ /* object. */
+ /* */
+ typedef struct FT_FaceRec_* FT_Face;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_Size */
+ /* */
+ /* <Description> */
+ /* A handle to an object used to model a face scaled to a given */
+ /* character size. */
+ /* */
+ /* <Note> */
+ /* Each @FT_Face has an _active_ @FT_Size object that is used by */
+ /* functions like @FT_Load_Glyph to determine the scaling */
+ /* transformation that in turn is used to load and hint glyphs and */
+ /* metrics. */
+ /* */
+ /* You can use @FT_Set_Char_Size, @FT_Set_Pixel_Sizes, */
+ /* @FT_Request_Size or even @FT_Select_Size to change the content */
+ /* (i.e., the scaling values) of the active @FT_Size. */
+ /* */
+ /* You can use @FT_New_Size to create additional size objects for a */
+ /* given @FT_Face, but they won't be used by other functions until */
+ /* you activate it through @FT_Activate_Size. Only one size can be */
+ /* activated at any given time per face. */
+ /* */
+ /* <Also> */
+ /* See @FT_SizeRec for the publicly accessible fields of a given size */
+ /* object. */
+ /* */
+ typedef struct FT_SizeRec_* FT_Size;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_GlyphSlot */
+ /* */
+ /* <Description> */
+ /* A handle to a given `glyph slot'. A slot is a container where it */
+ /* is possible to load any of the glyphs contained in its parent */
+ /* face. */
+ /* */
+ /* In other words, each time you call @FT_Load_Glyph or */
+ /* @FT_Load_Char, the slot's content is erased by the new glyph data, */
+ /* i.e., the glyph's metrics, its image (bitmap or outline), and */
+ /* other control information. */
+ /* */
+ /* <Also> */
+ /* See @FT_GlyphSlotRec for the publicly accessible glyph fields. */
+ /* */
+ typedef struct FT_GlyphSlotRec_* FT_GlyphSlot;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_CharMap */
+ /* */
+ /* <Description> */
+ /* A handle to a given character map. A charmap is used to translate */
+ /* character codes in a given encoding into glyph indexes for its */
+ /* parent's face. Some font formats may provide several charmaps per */
+ /* font. */
+ /* */
+ /* Each face object owns zero or more charmaps, but only one of them */
+ /* can be `active' and used by @FT_Get_Char_Index or @FT_Load_Char. */
+ /* */
+ /* The list of available charmaps in a face is available through the */
+ /* `face->num_charmaps' and `face->charmaps' fields of @FT_FaceRec. */
+ /* */
+ /* The currently active charmap is available as `face->charmap'. */
+ /* You should call @FT_Set_Charmap to change it. */
+ /* */
+ /* <Note> */
+ /* When a new face is created (either through @FT_New_Face or */
+ /* @FT_Open_Face), the library looks for a Unicode charmap within */
+ /* the list and automatically activates it. */
+ /* */
+ /* <Also> */
+ /* See @FT_CharMapRec for the publicly accessible fields of a given */
+ /* character map. */
+ /* */
+ typedef struct FT_CharMapRec_* FT_CharMap;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Macro> */
+ /* FT_ENC_TAG */
+ /* */
+ /* <Description> */
+ /* This macro converts four-letter tags into an unsigned long. It is */
+ /* used to define `encoding' identifiers (see @FT_Encoding). */
+ /* */
+ /* <Note> */
+ /* Since many 16-bit compilers don't like 32-bit enumerations, you */
+ /* should redefine this macro in case of problems to something like */
+ /* this: */
+ /* */
+ /* { */
+ /* #define FT_ENC_TAG( value, a, b, c, d ) value */
+ /* } */
+ /* */
+ /* to get a simple enumeration without assigning special numbers. */
+ /* */
+
+#ifndef FT_ENC_TAG
+#define FT_ENC_TAG( value, a, b, c, d ) \
+ value = ( ( (FT_UInt32)(a) << 24 ) | \
+ ( (FT_UInt32)(b) << 16 ) | \
+ ( (FT_UInt32)(c) << 8 ) | \
+ (FT_UInt32)(d) )
+
+#endif /* FT_ENC_TAG */
+
+
+ /*************************************************************************/
+ /* */
+ /* <Enum> */
+ /* FT_Encoding */
+ /* */
+ /* <Description> */
+ /* An enumeration used to specify character sets supported by */
+ /* charmaps. Used in the @FT_Select_Charmap API function. */
+ /* */
+ /* <Note> */
+ /* Despite the name, this enumeration lists specific character */
+ /* repertories (i.e., charsets), and not text encoding methods (e.g., */
+ /* UTF-8, UTF-16, etc.). */
+ /* */
+ /* Other encodings might be defined in the future. */
+ /* */
+ /* <Values> */
+ /* FT_ENCODING_NONE :: */
+ /* The encoding value~0 is reserved. */
+ /* */
+ /* FT_ENCODING_UNICODE :: */
+ /* Corresponds to the Unicode character set. This value covers */
+ /* all versions of the Unicode repertoire, including ASCII and */
+ /* Latin-1. Most fonts include a Unicode charmap, but not all */
+ /* of them. */
+ /* */
+ /* For example, if you want to access Unicode value U+1F028 (and */
+ /* the font contains it), use value 0x1F028 as the input value for */
+ /* @FT_Get_Char_Index. */
+ /* */
+ /* FT_ENCODING_MS_SYMBOL :: */
+ /* Corresponds to the Microsoft Symbol encoding, used to encode */
+ /* mathematical symbols and wingdings. For more information, see */
+ /* `http://www.microsoft.com/typography/otspec/recom.htm', */
+ /* `http://www.kostis.net/charsets/symbol.htm', and */
+ /* `http://www.kostis.net/charsets/wingding.htm'. */
+ /* */
+ /* This encoding uses character codes from the PUA (Private Unicode */
+ /* Area) in the range U+F020-U+F0FF. */
+ /* */
+ /* FT_ENCODING_SJIS :: */
+ /* Corresponds to Japanese SJIS encoding. More info at */
+ /* at `http://en.wikipedia.org/wiki/Shift_JIS'. */
+ /* See note on multi-byte encodings below. */
+ /* */
+ /* FT_ENCODING_GB2312 :: */
+ /* Corresponds to an encoding system for Simplified Chinese as used */
+ /* used in mainland China. */
+ /* */
+ /* FT_ENCODING_BIG5 :: */
+ /* Corresponds to an encoding system for Traditional Chinese as */
+ /* used in Taiwan and Hong Kong. */
+ /* */
+ /* FT_ENCODING_WANSUNG :: */
+ /* Corresponds to the Korean encoding system known as Wansung. */
+ /* For more information see */
+ /* `https://msdn.microsoft.com/en-US/goglobal/cc305154'. */
+ /* */
+ /* FT_ENCODING_JOHAB :: */
+ /* The Korean standard character set (KS~C 5601-1992), which */
+ /* corresponds to MS Windows code page 1361. This character set */
+ /* includes all possible Hangeul character combinations. */
+ /* */
+ /* FT_ENCODING_ADOBE_LATIN_1 :: */
+ /* Corresponds to a Latin-1 encoding as defined in a Type~1 */
+ /* PostScript font. It is limited to 256 character codes. */
+ /* */
+ /* FT_ENCODING_ADOBE_STANDARD :: */
+ /* Corresponds to the Adobe Standard encoding, as found in Type~1, */
+ /* CFF, and OpenType/CFF fonts. It is limited to 256 character */
+ /* codes. */
+ /* */
+ /* FT_ENCODING_ADOBE_EXPERT :: */
+ /* Corresponds to the Adobe Expert encoding, as found in Type~1, */
+ /* CFF, and OpenType/CFF fonts. It is limited to 256 character */
+ /* codes. */
+ /* */
+ /* FT_ENCODING_ADOBE_CUSTOM :: */
+ /* Corresponds to a custom encoding, as found in Type~1, CFF, and */
+ /* OpenType/CFF fonts. It is limited to 256 character codes. */
+ /* */
+ /* FT_ENCODING_APPLE_ROMAN :: */
+ /* Corresponds to the 8-bit Apple roman encoding. Many TrueType */
+ /* and OpenType fonts contain a charmap for this encoding, since */
+ /* older versions of Mac OS are able to use it. */
+ /* */
+ /* FT_ENCODING_OLD_LATIN_2 :: */
+ /* This value is deprecated and was never used nor reported by */
+ /* FreeType. Don't use or test for it. */
+ /* */
+ /* FT_ENCODING_MS_SJIS :: */
+ /* Same as FT_ENCODING_SJIS. Deprecated. */
+ /* */
+ /* FT_ENCODING_MS_GB2312 :: */
+ /* Same as FT_ENCODING_GB2312. Deprecated. */
+ /* */
+ /* FT_ENCODING_MS_BIG5 :: */
+ /* Same as FT_ENCODING_BIG5. Deprecated. */
+ /* */
+ /* FT_ENCODING_MS_WANSUNG :: */
+ /* Same as FT_ENCODING_WANSUNG. Deprecated. */
+ /* */
+ /* FT_ENCODING_MS_JOHAB :: */
+ /* Same as FT_ENCODING_JOHAB. Deprecated. */
+ /* */
+ /* <Note> */
+ /* By default, FreeType automatically synthesizes a Unicode charmap */
+ /* for PostScript fonts, using their glyph names dictionaries. */
+ /* However, it also reports the encodings defined explicitly in the */
+ /* font file, for the cases when they are needed, with the Adobe */
+ /* values as well. */
+ /* */
+ /* FT_ENCODING_NONE is set by the BDF and PCF drivers if the charmap */
+ /* is neither Unicode nor ISO-8859-1 (otherwise it is set to */
+ /* FT_ENCODING_UNICODE). Use @FT_Get_BDF_Charset_ID to find out */
+ /* which encoding is really present. If, for example, the */
+ /* `cs_registry' field is `KOI8' and the `cs_encoding' field is `R', */
+ /* the font is encoded in KOI8-R. */
+ /* */
+ /* FT_ENCODING_NONE is always set (with a single exception) by the */
+ /* winfonts driver. Use @FT_Get_WinFNT_Header and examine the */
+ /* `charset' field of the @FT_WinFNT_HeaderRec structure to find out */
+ /* which encoding is really present. For example, */
+ /* @FT_WinFNT_ID_CP1251 (204) means Windows code page 1251 (for */
+ /* Russian). */
+ /* */
+ /* FT_ENCODING_NONE is set if `platform_id' is @TT_PLATFORM_MACINTOSH */
+ /* and `encoding_id' is not @TT_MAC_ID_ROMAN (otherwise it is set to */
+ /* FT_ENCODING_APPLE_ROMAN). */
+ /* */
+ /* If `platform_id' is @TT_PLATFORM_MACINTOSH, use the function */
+ /* @FT_Get_CMap_Language_ID to query the Mac language ID that may */
+ /* be needed to be able to distinguish Apple encoding variants. See */
+ /* */
+ /* http://www.unicode.org/Public/MAPPINGS/VENDORS/APPLE/Readme.txt */
+ /* */
+ /* to get an idea how to do that. Basically, if the language ID */
+ /* is~0, don't use it, otherwise subtract 1 from the language ID. */
+ /* Then examine `encoding_id'. If, for example, `encoding_id' is */
+ /* @TT_MAC_ID_ROMAN and the language ID (minus~1) is */
+ /* `TT_MAC_LANGID_GREEK', it is the Greek encoding, not Roman. */
+ /* @TT_MAC_ID_ARABIC with `TT_MAC_LANGID_FARSI' means the Farsi */
+ /* variant the Arabic encoding. */
+ /* */
+ typedef enum FT_Encoding_
+ {
+ FT_ENC_TAG( FT_ENCODING_NONE, 0, 0, 0, 0 ),
+
+ FT_ENC_TAG( FT_ENCODING_MS_SYMBOL, 's', 'y', 'm', 'b' ),
+ FT_ENC_TAG( FT_ENCODING_UNICODE, 'u', 'n', 'i', 'c' ),
+
+ FT_ENC_TAG( FT_ENCODING_SJIS, 's', 'j', 'i', 's' ),
+ FT_ENC_TAG( FT_ENCODING_GB2312, 'g', 'b', ' ', ' ' ),
+ FT_ENC_TAG( FT_ENCODING_BIG5, 'b', 'i', 'g', '5' ),
+ FT_ENC_TAG( FT_ENCODING_WANSUNG, 'w', 'a', 'n', 's' ),
+ FT_ENC_TAG( FT_ENCODING_JOHAB, 'j', 'o', 'h', 'a' ),
+
+ /* for backwards compatibility */
+ FT_ENCODING_MS_SJIS = FT_ENCODING_SJIS,
+ FT_ENCODING_MS_GB2312 = FT_ENCODING_GB2312,
+ FT_ENCODING_MS_BIG5 = FT_ENCODING_BIG5,
+ FT_ENCODING_MS_WANSUNG = FT_ENCODING_WANSUNG,
+ FT_ENCODING_MS_JOHAB = FT_ENCODING_JOHAB,
+
+ FT_ENC_TAG( FT_ENCODING_ADOBE_STANDARD, 'A', 'D', 'O', 'B' ),
+ FT_ENC_TAG( FT_ENCODING_ADOBE_EXPERT, 'A', 'D', 'B', 'E' ),
+ FT_ENC_TAG( FT_ENCODING_ADOBE_CUSTOM, 'A', 'D', 'B', 'C' ),
+ FT_ENC_TAG( FT_ENCODING_ADOBE_LATIN_1, 'l', 'a', 't', '1' ),
+
+ FT_ENC_TAG( FT_ENCODING_OLD_LATIN_2, 'l', 'a', 't', '2' ),
+
+ FT_ENC_TAG( FT_ENCODING_APPLE_ROMAN, 'a', 'r', 'm', 'n' )
+
+ } FT_Encoding;
+
+
+ /* these constants are deprecated; use the corresponding `FT_Encoding' */
+ /* values instead */
+#define ft_encoding_none FT_ENCODING_NONE
+#define ft_encoding_unicode FT_ENCODING_UNICODE
+#define ft_encoding_symbol FT_ENCODING_MS_SYMBOL
+#define ft_encoding_latin_1 FT_ENCODING_ADOBE_LATIN_1
+#define ft_encoding_latin_2 FT_ENCODING_OLD_LATIN_2
+#define ft_encoding_sjis FT_ENCODING_SJIS
+#define ft_encoding_gb2312 FT_ENCODING_GB2312
+#define ft_encoding_big5 FT_ENCODING_BIG5
+#define ft_encoding_wansung FT_ENCODING_WANSUNG
+#define ft_encoding_johab FT_ENCODING_JOHAB
+
+#define ft_encoding_adobe_standard FT_ENCODING_ADOBE_STANDARD
+#define ft_encoding_adobe_expert FT_ENCODING_ADOBE_EXPERT
+#define ft_encoding_adobe_custom FT_ENCODING_ADOBE_CUSTOM
+#define ft_encoding_apple_roman FT_ENCODING_APPLE_ROMAN
+
+
+ /*************************************************************************/
+ /* */
+ /* <Struct> */
+ /* FT_CharMapRec */
+ /* */
+ /* <Description> */
+ /* The base charmap structure. */
+ /* */
+ /* <Fields> */
+ /* face :: A handle to the parent face object. */
+ /* */
+ /* encoding :: An @FT_Encoding tag identifying the charmap. Use */
+ /* this with @FT_Select_Charmap. */
+ /* */
+ /* platform_id :: An ID number describing the platform for the */
+ /* following encoding ID. This comes directly from */
+ /* the TrueType specification and should be emulated */
+ /* for other formats. */
+ /* */
+ /* encoding_id :: A platform specific encoding number. This also */
+ /* comes from the TrueType specification and should be */
+ /* emulated similarly. */
+ /* */
+ typedef struct FT_CharMapRec_
+ {
+ FT_Face face;
+ FT_Encoding encoding;
+ FT_UShort platform_id;
+ FT_UShort encoding_id;
+
+ } FT_CharMapRec;
+
+
+ /*************************************************************************/
+ /*************************************************************************/
+ /* */
+ /* B A S E O B J E C T C L A S S E S */
+ /* */
+ /*************************************************************************/
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_Face_Internal */
+ /* */
+ /* <Description> */
+ /* An opaque handle to an `FT_Face_InternalRec' structure, used to */
+ /* model private data of a given @FT_Face object. */
+ /* */
+ /* This structure might change between releases of FreeType~2 and is */
+ /* not generally available to client applications. */
+ /* */
+ typedef struct FT_Face_InternalRec_* FT_Face_Internal;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Struct> */
+ /* FT_FaceRec */
+ /* */
+ /* <Description> */
+ /* FreeType root face class structure. A face object models a */
+ /* typeface in a font file. */
+ /* */
+ /* <Fields> */
+ /* num_faces :: The number of faces in the font file. Some */
+ /* font formats can have multiple faces in */
+ /* a font file. */
+ /* */
+ /* face_index :: This field holds two different values. */
+ /* Bits 0-15 are the index of the face in the */
+ /* font file (starting with value~0). They */
+ /* are set to~0 if there is only one face in */
+ /* the font file. */
+ /* */
+ /* Bits 16-30 are relevant to GX variation */
+ /* fonts only, holding the named instance */
+ /* index for the current face index (starting */
+ /* with value~1; value~0 indicates font access */
+ /* without GX variation data). For non-GX */
+ /* fonts, bits 16-30 are ignored. If we have */
+ /* the third named instance of face~4, say, */
+ /* `face_index' is set to 0x00030004. */
+ /* */
+ /* Bit 31 is always zero (this is, */
+ /* `face_index' is always a positive value). */
+ /* */
+ /* face_flags :: A set of bit flags that give important */
+ /* information about the face; see */
+ /* @FT_FACE_FLAG_XXX for the details. */
+ /* */
+ /* style_flags :: The lower 16~bits contain a set of bit */
+ /* flags indicating the style of the face; see */
+ /* @FT_STYLE_FLAG_XXX for the details. Bits */
+ /* 16-30 hold the number of named instances */
+ /* available for the current face if we have a */
+ /* GX variation (sub)font. Bit 31 is always */
+ /* zero (this is, `style_flags' is always a */
+ /* positive value). */
+ /* */
+ /* num_glyphs :: The number of glyphs in the face. If the */
+ /* face is scalable and has sbits (see */
+ /* `num_fixed_sizes'), it is set to the number */
+ /* of outline glyphs. */
+ /* */
+ /* For CID-keyed fonts, this value gives the */
+ /* highest CID used in the font. */
+ /* */
+ /* family_name :: The face's family name. This is an ASCII */
+ /* string, usually in English, that describes */
+ /* the typeface's family (like `Times New */
+ /* Roman', `Bodoni', `Garamond', etc). This */
+ /* is a least common denominator used to list */
+ /* fonts. Some formats (TrueType & OpenType) */
+ /* provide localized and Unicode versions of */
+ /* this string. Applications should use the */
+ /* format specific interface to access them. */
+ /* Can be NULL (e.g., in fonts embedded in a */
+ /* PDF file). */
+ /* */
+ /* In case the font doesn't provide a specific */
+ /* family name entry, FreeType tries to */
+ /* synthesize one, deriving it from other name */
+ /* entries. */
+ /* */
+ /* style_name :: The face's style name. This is an ASCII */
+ /* string, usually in English, that describes */
+ /* the typeface's style (like `Italic', */
+ /* `Bold', `Condensed', etc). Not all font */
+ /* formats provide a style name, so this field */
+ /* is optional, and can be set to NULL. As */
+ /* for `family_name', some formats provide */
+ /* localized and Unicode versions of this */
+ /* string. Applications should use the format */
+ /* specific interface to access them. */
+ /* */
+ /* num_fixed_sizes :: The number of bitmap strikes in the face. */
+ /* Even if the face is scalable, there might */
+ /* still be bitmap strikes, which are called */
+ /* `sbits' in that case. */
+ /* */
+ /* available_sizes :: An array of @FT_Bitmap_Size for all bitmap */
+ /* strikes in the face. It is set to NULL if */
+ /* there is no bitmap strike. */
+ /* */
+ /* num_charmaps :: The number of charmaps in the face. */
+ /* */
+ /* charmaps :: An array of the charmaps of the face. */
+ /* */
+ /* generic :: A field reserved for client uses. See the */
+ /* @FT_Generic type description. */
+ /* */
+ /* bbox :: The font bounding box. Coordinates are */
+ /* expressed in font units (see */
+ /* `units_per_EM'). The box is large enough */
+ /* to contain any glyph from the font. Thus, */
+ /* `bbox.yMax' can be seen as the `maximum */
+ /* ascender', and `bbox.yMin' as the `minimum */
+ /* descender'. Only relevant for scalable */
+ /* formats. */
+ /* */
+ /* Note that the bounding box might be off by */
+ /* (at least) one pixel for hinted fonts. See */
+ /* @FT_Size_Metrics for further discussion. */
+ /* */
+ /* units_per_EM :: The number of font units per EM square for */
+ /* this face. This is typically 2048 for */
+ /* TrueType fonts, and 1000 for Type~1 fonts. */
+ /* Only relevant for scalable formats. */
+ /* */
+ /* ascender :: The typographic ascender of the face, */
+ /* expressed in font units. For font formats */
+ /* not having this information, it is set to */
+ /* `bbox.yMax'. Only relevant for scalable */
+ /* formats. */
+ /* */
+ /* descender :: The typographic descender of the face, */
+ /* expressed in font units. For font formats */
+ /* not having this information, it is set to */
+ /* `bbox.yMin'. Note that this field is */
+ /* usually negative. Only relevant for */
+ /* scalable formats. */
+ /* */
+ /* height :: This value is the vertical distance */
+ /* between two consecutive baselines, */
+ /* expressed in font units. It is always */
+ /* positive. Only relevant for scalable */
+ /* formats. */
+ /* */
+ /* If you want the global glyph height, use */
+ /* `ascender - descender'. */
+ /* */
+ /* max_advance_width :: The maximum advance width, in font units, */
+ /* for all glyphs in this face. This can be */
+ /* used to make word wrapping computations */
+ /* faster. Only relevant for scalable */
+ /* formats. */
+ /* */
+ /* max_advance_height :: The maximum advance height, in font units, */
+ /* for all glyphs in this face. This is only */
+ /* relevant for vertical layouts, and is set */
+ /* to `height' for fonts that do not provide */
+ /* vertical metrics. Only relevant for */
+ /* scalable formats. */
+ /* */
+ /* underline_position :: The position, in font units, of the */
+ /* underline line for this face. It is the */
+ /* center of the underlining stem. Only */
+ /* relevant for scalable formats. */
+ /* */
+ /* underline_thickness :: The thickness, in font units, of the */
+ /* underline for this face. Only relevant for */
+ /* scalable formats. */
+ /* */
+ /* glyph :: The face's associated glyph slot(s). */
+ /* */
+ /* size :: The current active size for this face. */
+ /* */
+ /* charmap :: The current active charmap for this face. */
+ /* */
+ /* <Note> */
+ /* Fields may be changed after a call to @FT_Attach_File or */
+ /* @FT_Attach_Stream. */
+ /* */
+ typedef struct FT_FaceRec_
+ {
+ FT_Long num_faces;
+ FT_Long face_index;
+
+ FT_Long face_flags;
+ FT_Long style_flags;
+
+ FT_Long num_glyphs;
+
+ FT_String* family_name;
+ FT_String* style_name;
+
+ FT_Int num_fixed_sizes;
+ FT_Bitmap_Size* available_sizes;
+
+ FT_Int num_charmaps;
+ FT_CharMap* charmaps;
+
+ FT_Generic generic;
+
+ /*# The following member variables (down to `underline_thickness') */
+ /*# are only relevant to scalable outlines; cf. @FT_Bitmap_Size */
+ /*# for bitmap fonts. */
+ FT_BBox bbox;
+
+ FT_UShort units_per_EM;
+ FT_Short ascender;
+ FT_Short descender;
+ FT_Short height;
+
+ FT_Short max_advance_width;
+ FT_Short max_advance_height;
+
+ FT_Short underline_position;
+ FT_Short underline_thickness;
+
+ FT_GlyphSlot glyph;
+ FT_Size size;
+ FT_CharMap charmap;
+
+ /*@private begin */
+
+ FT_Driver driver;
+ FT_Memory memory;
+ FT_Stream stream;
+
+ FT_ListRec sizes_list;
+
+ FT_Generic autohint; /* face-specific auto-hinter data */
+ void* extensions; /* unused */
+
+ FT_Face_Internal internal;
+
+ /*@private end */
+
+ } FT_FaceRec;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Enum> */
+ /* FT_FACE_FLAG_XXX */
+ /* */
+ /* <Description> */
+ /* A list of bit flags used in the `face_flags' field of the */
+ /* @FT_FaceRec structure. They inform client applications of */
+ /* properties of the corresponding face. */
+ /* */
+ /* <Values> */
+ /* FT_FACE_FLAG_SCALABLE :: */
+ /* Indicates that the face contains outline glyphs. This doesn't */
+ /* prevent bitmap strikes, i.e., a face can have both this and */
+ /* and @FT_FACE_FLAG_FIXED_SIZES set. */
+ /* */
+ /* FT_FACE_FLAG_FIXED_SIZES :: */
+ /* Indicates that the face contains bitmap strikes. See also the */
+ /* `num_fixed_sizes' and `available_sizes' fields of @FT_FaceRec. */
+ /* */
+ /* FT_FACE_FLAG_FIXED_WIDTH :: */
+ /* Indicates that the face contains fixed-width characters (like */
+ /* Courier, Lucido, MonoType, etc.). */
+ /* */
+ /* FT_FACE_FLAG_SFNT :: */
+ /* Indicates that the face uses the `sfnt' storage scheme. For */
+ /* now, this means TrueType and OpenType. */
+ /* */
+ /* FT_FACE_FLAG_HORIZONTAL :: */
+ /* Indicates that the face contains horizontal glyph metrics. This */
+ /* should be set for all common formats. */
+ /* */
+ /* FT_FACE_FLAG_VERTICAL :: */
+ /* Indicates that the face contains vertical glyph metrics. This */
+ /* is only available in some formats, not all of them. */
+ /* */
+ /* FT_FACE_FLAG_KERNING :: */
+ /* Indicates that the face contains kerning information. If set, */
+ /* the kerning distance can be retrieved through the function */
+ /* @FT_Get_Kerning. Otherwise the function always return the */
+ /* vector (0,0). Note that FreeType doesn't handle kerning data */
+ /* from the `GPOS' table (as present in some OpenType fonts). */
+ /* */
+ /* FT_FACE_FLAG_FAST_GLYPHS :: */
+ /* THIS FLAG IS DEPRECATED. DO NOT USE OR TEST IT. */
+ /* */
+ /* FT_FACE_FLAG_MULTIPLE_MASTERS :: */
+ /* Indicates that the font contains multiple masters and is capable */
+ /* of interpolating between them. See the multiple-masters */
+ /* specific API for details. */
+ /* */
+ /* FT_FACE_FLAG_GLYPH_NAMES :: */
+ /* Indicates that the font contains glyph names that can be */
+ /* retrieved through @FT_Get_Glyph_Name. Note that some TrueType */
+ /* fonts contain broken glyph name tables. Use the function */
+ /* @FT_Has_PS_Glyph_Names when needed. */
+ /* */
+ /* FT_FACE_FLAG_EXTERNAL_STREAM :: */
+ /* Used internally by FreeType to indicate that a face's stream was */
+ /* provided by the client application and should not be destroyed */
+ /* when @FT_Done_Face is called. Don't read or test this flag. */
+ /* */
+ /* FT_FACE_FLAG_HINTER :: */
+ /* Set if the font driver has a hinting machine of its own. For */
+ /* example, with TrueType fonts, it makes sense to use data from */
+ /* the SFNT `gasp' table only if the native TrueType hinting engine */
+ /* (with the bytecode interpreter) is available and active. */
+ /* */
+ /* FT_FACE_FLAG_CID_KEYED :: */
+ /* Set if the font is CID-keyed. In that case, the font is not */
+ /* accessed by glyph indices but by CID values. For subsetted */
+ /* CID-keyed fonts this has the consequence that not all index */
+ /* values are a valid argument to FT_Load_Glyph. Only the CID */
+ /* values for which corresponding glyphs in the subsetted font */
+ /* exist make FT_Load_Glyph return successfully; in all other cases */
+ /* you get an `FT_Err_Invalid_Argument' error. */
+ /* */
+ /* Note that CID-keyed fonts that are in an SFNT wrapper don't */
+ /* have this flag set since the glyphs are accessed in the normal */
+ /* way (using contiguous indices); the `CID-ness' isn't visible to */
+ /* the application. */
+ /* */
+ /* FT_FACE_FLAG_TRICKY :: */
+ /* Set if the font is `tricky', this is, it always needs the */
+ /* font format's native hinting engine to get a reasonable result. */
+ /* A typical example is the Chinese font `mingli.ttf' that uses */
+ /* TrueType bytecode instructions to move and scale all of its */
+ /* subglyphs. */
+ /* */
+ /* It is not possible to auto-hint such fonts using */
+ /* @FT_LOAD_FORCE_AUTOHINT; it will also ignore */
+ /* @FT_LOAD_NO_HINTING. You have to set both @FT_LOAD_NO_HINTING */
+ /* and @FT_LOAD_NO_AUTOHINT to really disable hinting; however, you */
+ /* probably never want this except for demonstration purposes. */
+ /* */
+ /* Currently, there are about a dozen TrueType fonts in the list of */
+ /* tricky fonts; they are hard-coded in file `ttobjs.c'. */
+ /* */
+ /* FT_FACE_FLAG_COLOR :: */
+ /* Set if the font has color glyph tables. To access color glyphs */
+ /* use @FT_LOAD_COLOR. */
+ /* */
+#define FT_FACE_FLAG_SCALABLE ( 1L << 0 )
+#define FT_FACE_FLAG_FIXED_SIZES ( 1L << 1 )
+#define FT_FACE_FLAG_FIXED_WIDTH ( 1L << 2 )
+#define FT_FACE_FLAG_SFNT ( 1L << 3 )
+#define FT_FACE_FLAG_HORIZONTAL ( 1L << 4 )
+#define FT_FACE_FLAG_VERTICAL ( 1L << 5 )
+#define FT_FACE_FLAG_KERNING ( 1L << 6 )
+#define FT_FACE_FLAG_FAST_GLYPHS ( 1L << 7 )
+#define FT_FACE_FLAG_MULTIPLE_MASTERS ( 1L << 8 )
+#define FT_FACE_FLAG_GLYPH_NAMES ( 1L << 9 )
+#define FT_FACE_FLAG_EXTERNAL_STREAM ( 1L << 10 )
+#define FT_FACE_FLAG_HINTER ( 1L << 11 )
+#define FT_FACE_FLAG_CID_KEYED ( 1L << 12 )
+#define FT_FACE_FLAG_TRICKY ( 1L << 13 )
+#define FT_FACE_FLAG_COLOR ( 1L << 14 )
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_HAS_HORIZONTAL( face )
+ *
+ * @description:
+ * A macro that returns true whenever a face object contains
+ * horizontal metrics (this is true for all font formats though).
+ *
+ * @also:
+ * @FT_HAS_VERTICAL can be used to check for vertical metrics.
+ *
+ */
+#define FT_HAS_HORIZONTAL( face ) \
+ ( face->face_flags & FT_FACE_FLAG_HORIZONTAL )
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_HAS_VERTICAL( face )
+ *
+ * @description:
+ * A macro that returns true whenever a face object contains real
+ * vertical metrics (and not only synthesized ones).
+ *
+ */
+#define FT_HAS_VERTICAL( face ) \
+ ( face->face_flags & FT_FACE_FLAG_VERTICAL )
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_HAS_KERNING( face )
+ *
+ * @description:
+ * A macro that returns true whenever a face object contains kerning
+ * data that can be accessed with @FT_Get_Kerning.
+ *
+ */
+#define FT_HAS_KERNING( face ) \
+ ( face->face_flags & FT_FACE_FLAG_KERNING )
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_IS_SCALABLE( face )
+ *
+ * @description:
+ * A macro that returns true whenever a face object contains a scalable
+ * font face (true for TrueType, Type~1, Type~42, CID, OpenType/CFF,
+ * and PFR font formats.
+ *
+ */
+#define FT_IS_SCALABLE( face ) \
+ ( face->face_flags & FT_FACE_FLAG_SCALABLE )
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_IS_SFNT( face )
+ *
+ * @description:
+ * A macro that returns true whenever a face object contains a font
+ * whose format is based on the SFNT storage scheme. This usually
+ * means: TrueType fonts, OpenType fonts, as well as SFNT-based embedded
+ * bitmap fonts.
+ *
+ * If this macro is true, all functions defined in @FT_SFNT_NAMES_H and
+ * @FT_TRUETYPE_TABLES_H are available.
+ *
+ */
+#define FT_IS_SFNT( face ) \
+ ( face->face_flags & FT_FACE_FLAG_SFNT )
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_IS_FIXED_WIDTH( face )
+ *
+ * @description:
+ * A macro that returns true whenever a face object contains a font face
+ * that contains fixed-width (or `monospace', `fixed-pitch', etc.)
+ * glyphs.
+ *
+ */
+#define FT_IS_FIXED_WIDTH( face ) \
+ ( face->face_flags & FT_FACE_FLAG_FIXED_WIDTH )
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_HAS_FIXED_SIZES( face )
+ *
+ * @description:
+ * A macro that returns true whenever a face object contains some
+ * embedded bitmaps. See the `available_sizes' field of the
+ * @FT_FaceRec structure.
+ *
+ */
+#define FT_HAS_FIXED_SIZES( face ) \
+ ( face->face_flags & FT_FACE_FLAG_FIXED_SIZES )
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_HAS_FAST_GLYPHS( face )
+ *
+ * @description:
+ * Deprecated.
+ *
+ */
+#define FT_HAS_FAST_GLYPHS( face ) 0
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_HAS_GLYPH_NAMES( face )
+ *
+ * @description:
+ * A macro that returns true whenever a face object contains some glyph
+ * names that can be accessed through @FT_Get_Glyph_Name.
+ *
+ */
+#define FT_HAS_GLYPH_NAMES( face ) \
+ ( face->face_flags & FT_FACE_FLAG_GLYPH_NAMES )
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_HAS_MULTIPLE_MASTERS( face )
+ *
+ * @description:
+ * A macro that returns true whenever a face object contains some
+ * multiple masters. The functions provided by @FT_MULTIPLE_MASTERS_H
+ * are then available to choose the exact design you want.
+ *
+ */
+#define FT_HAS_MULTIPLE_MASTERS( face ) \
+ ( face->face_flags & FT_FACE_FLAG_MULTIPLE_MASTERS )
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_IS_CID_KEYED( face )
+ *
+ * @description:
+ * A macro that returns true whenever a face object contains a CID-keyed
+ * font. See the discussion of @FT_FACE_FLAG_CID_KEYED for more
+ * details.
+ *
+ * If this macro is true, all functions defined in @FT_CID_H are
+ * available.
+ *
+ */
+#define FT_IS_CID_KEYED( face ) \
+ ( face->face_flags & FT_FACE_FLAG_CID_KEYED )
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_IS_TRICKY( face )
+ *
+ * @description:
+ * A macro that returns true whenever a face represents a `tricky' font.
+ * See the discussion of @FT_FACE_FLAG_TRICKY for more details.
+ *
+ */
+#define FT_IS_TRICKY( face ) \
+ ( face->face_flags & FT_FACE_FLAG_TRICKY )
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_HAS_COLOR( face )
+ *
+ * @description:
+ * A macro that returns true whenever a face object contains
+ * tables for color glyphs.
+ *
+ */
+#define FT_HAS_COLOR( face ) \
+ ( face->face_flags & FT_FACE_FLAG_COLOR )
+
+
+ /*************************************************************************/
+ /* */
+ /* <Const> */
+ /* FT_STYLE_FLAG_XXX */
+ /* */
+ /* <Description> */
+ /* A list of bit flags used to indicate the style of a given face. */
+ /* These are used in the `style_flags' field of @FT_FaceRec. */
+ /* */
+ /* <Values> */
+ /* FT_STYLE_FLAG_ITALIC :: */
+ /* Indicates that a given face style is italic or oblique. */
+ /* */
+ /* FT_STYLE_FLAG_BOLD :: */
+ /* Indicates that a given face is bold. */
+ /* */
+ /* <Note> */
+ /* The style information as provided by FreeType is very basic. More */
+ /* details are beyond the scope and should be done on a higher level */
+ /* (for example, by analyzing various fields of the `OS/2' table in */
+ /* SFNT based fonts). */
+ /* */
+#define FT_STYLE_FLAG_ITALIC ( 1 << 0 )
+#define FT_STYLE_FLAG_BOLD ( 1 << 1 )
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_Size_Internal */
+ /* */
+ /* <Description> */
+ /* An opaque handle to an `FT_Size_InternalRec' structure, used to */
+ /* model private data of a given @FT_Size object. */
+ /* */
+ typedef struct FT_Size_InternalRec_* FT_Size_Internal;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Struct> */
+ /* FT_Size_Metrics */
+ /* */
+ /* <Description> */
+ /* The size metrics structure gives the metrics of a size object. */
+ /* */
+ /* <Fields> */
+ /* x_ppem :: The width of the scaled EM square in pixels, hence */
+ /* the term `ppem' (pixels per EM). It is also */
+ /* referred to as `nominal width'. */
+ /* */
+ /* y_ppem :: The height of the scaled EM square in pixels, */
+ /* hence the term `ppem' (pixels per EM). It is also */
+ /* referred to as `nominal height'. */
+ /* */
+ /* x_scale :: A 16.16 fractional scaling value used to convert */
+ /* horizontal metrics from font units to 26.6 */
+ /* fractional pixels. Only relevant for scalable */
+ /* font formats. */
+ /* */
+ /* y_scale :: A 16.16 fractional scaling value used to convert */
+ /* vertical metrics from font units to 26.6 */
+ /* fractional pixels. Only relevant for scalable */
+ /* font formats. */
+ /* */
+ /* ascender :: The ascender in 26.6 fractional pixels. See */
+ /* @FT_FaceRec for the details. */
+ /* */
+ /* descender :: The descender in 26.6 fractional pixels. See */
+ /* @FT_FaceRec for the details. */
+ /* */
+ /* height :: The height in 26.6 fractional pixels. See */
+ /* @FT_FaceRec for the details. */
+ /* */
+ /* max_advance :: The maximum advance width in 26.6 fractional */
+ /* pixels. See @FT_FaceRec for the details. */
+ /* */
+ /* <Note> */
+ /* The scaling values, if relevant, are determined first during a */
+ /* size changing operation. The remaining fields are then set by the */
+ /* driver. For scalable formats, they are usually set to scaled */
+ /* values of the corresponding fields in @FT_FaceRec. */
+ /* */
+ /* Note that due to glyph hinting, these values might not be exact */
+ /* for certain fonts. Thus they must be treated as unreliable */
+ /* with an error margin of at least one pixel! */
+ /* */
+ /* Indeed, the only way to get the exact metrics is to render _all_ */
+ /* glyphs. As this would be a definite performance hit, it is up to */
+ /* client applications to perform such computations. */
+ /* */
+ /* The FT_Size_Metrics structure is valid for bitmap fonts also. */
+ /* */
+ typedef struct FT_Size_Metrics_
+ {
+ FT_UShort x_ppem; /* horizontal pixels per EM */
+ FT_UShort y_ppem; /* vertical pixels per EM */
+
+ FT_Fixed x_scale; /* scaling values used to convert font */
+ FT_Fixed y_scale; /* units to 26.6 fractional pixels */
+
+ FT_Pos ascender; /* ascender in 26.6 frac. pixels */
+ FT_Pos descender; /* descender in 26.6 frac. pixels */
+ FT_Pos height; /* text height in 26.6 frac. pixels */
+ FT_Pos max_advance; /* max horizontal advance, in 26.6 pixels */
+
+ } FT_Size_Metrics;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Struct> */
+ /* FT_SizeRec */
+ /* */
+ /* <Description> */
+ /* FreeType root size class structure. A size object models a face */
+ /* object at a given size. */
+ /* */
+ /* <Fields> */
+ /* face :: Handle to the parent face object. */
+ /* */
+ /* generic :: A typeless pointer, unused by the FreeType library or */
+ /* any of its drivers. It can be used by client */
+ /* applications to link their own data to each size */
+ /* object. */
+ /* */
+ /* metrics :: Metrics for this size object. This field is read-only. */
+ /* */
+ typedef struct FT_SizeRec_
+ {
+ FT_Face face; /* parent face object */
+ FT_Generic generic; /* generic pointer for client uses */
+ FT_Size_Metrics metrics; /* size metrics */
+ FT_Size_Internal internal;
+
+ } FT_SizeRec;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Struct> */
+ /* FT_SubGlyph */
+ /* */
+ /* <Description> */
+ /* The subglyph structure is an internal object used to describe */
+ /* subglyphs (for example, in the case of composites). */
+ /* */
+ /* <Note> */
+ /* The subglyph implementation is not part of the high-level API, */
+ /* hence the forward structure declaration. */
+ /* */
+ /* You can however retrieve subglyph information with */
+ /* @FT_Get_SubGlyph_Info. */
+ /* */
+ typedef struct FT_SubGlyphRec_* FT_SubGlyph;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_Slot_Internal */
+ /* */
+ /* <Description> */
+ /* An opaque handle to an `FT_Slot_InternalRec' structure, used to */
+ /* model private data of a given @FT_GlyphSlot object. */
+ /* */
+ typedef struct FT_Slot_InternalRec_* FT_Slot_Internal;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Struct> */
+ /* FT_GlyphSlotRec */
+ /* */
+ /* <Description> */
+ /* FreeType root glyph slot class structure. A glyph slot is a */
+ /* container where individual glyphs can be loaded, be they in */
+ /* outline or bitmap format. */
+ /* */
+ /* <Fields> */
+ /* library :: A handle to the FreeType library instance */
+ /* this slot belongs to. */
+ /* */
+ /* face :: A handle to the parent face object. */
+ /* */
+ /* next :: In some cases (like some font tools), several */
+ /* glyph slots per face object can be a good */
+ /* thing. As this is rare, the glyph slots are */
+ /* listed through a direct, single-linked list */
+ /* using its `next' field. */
+ /* */
+ /* generic :: A typeless pointer unused by the FreeType */
+ /* library or any of its drivers. It can be */
+ /* used by client applications to link their own */
+ /* data to each glyph slot object. */
+ /* */
+ /* metrics :: The metrics of the last loaded glyph in the */
+ /* slot. The returned values depend on the last */
+ /* load flags (see the @FT_Load_Glyph API */
+ /* function) and can be expressed either in 26.6 */
+ /* fractional pixels or font units. */
+ /* */
+ /* Note that even when the glyph image is */
+ /* transformed, the metrics are not. */
+ /* */
+ /* linearHoriAdvance :: The advance width of the unhinted glyph. */
+ /* Its value is expressed in 16.16 fractional */
+ /* pixels, unless @FT_LOAD_LINEAR_DESIGN is set */
+ /* when loading the glyph. This field can be */
+ /* important to perform correct WYSIWYG layout. */
+ /* Only relevant for outline glyphs. */
+ /* */
+ /* linearVertAdvance :: The advance height of the unhinted glyph. */
+ /* Its value is expressed in 16.16 fractional */
+ /* pixels, unless @FT_LOAD_LINEAR_DESIGN is set */
+ /* when loading the glyph. This field can be */
+ /* important to perform correct WYSIWYG layout. */
+ /* Only relevant for outline glyphs. */
+ /* */
+ /* advance :: This shorthand is, depending on */
+ /* @FT_LOAD_IGNORE_TRANSFORM, the transformed */
+ /* (hinted) advance width for the glyph, in 26.6 */
+ /* fractional pixel format. As specified with */
+ /* @FT_LOAD_VERTICAL_LAYOUT, it uses either the */
+ /* `horiAdvance' or the `vertAdvance' value of */
+ /* `metrics' field. */
+ /* */
+ /* format :: This field indicates the format of the image */
+ /* contained in the glyph slot. Typically */
+ /* @FT_GLYPH_FORMAT_BITMAP, */
+ /* @FT_GLYPH_FORMAT_OUTLINE, or */
+ /* @FT_GLYPH_FORMAT_COMPOSITE, but others are */
+ /* possible. */
+ /* */
+ /* bitmap :: This field is used as a bitmap descriptor */
+ /* when the slot format is */
+ /* @FT_GLYPH_FORMAT_BITMAP. Note that the */
+ /* address and content of the bitmap buffer can */
+ /* change between calls of @FT_Load_Glyph and a */
+ /* few other functions. */
+ /* */
+ /* bitmap_left :: The bitmap's left bearing expressed in */
+ /* integer pixels. Only valid if the format is */
+ /* @FT_GLYPH_FORMAT_BITMAP, this is, if the */
+ /* glyph slot contains a bitmap. */
+ /* */
+ /* bitmap_top :: The bitmap's top bearing expressed in integer */
+ /* pixels. Remember that this is the distance */
+ /* from the baseline to the top-most glyph */
+ /* scanline, upwards y~coordinates being */
+ /* *positive*. */
+ /* */
+ /* outline :: The outline descriptor for the current glyph */
+ /* image if its format is */
+ /* @FT_GLYPH_FORMAT_OUTLINE. Once a glyph is */
+ /* loaded, `outline' can be transformed, */
+ /* distorted, embolded, etc. However, it must */
+ /* not be freed. */
+ /* */
+ /* num_subglyphs :: The number of subglyphs in a composite glyph. */
+ /* This field is only valid for the composite */
+ /* glyph format that should normally only be */
+ /* loaded with the @FT_LOAD_NO_RECURSE flag. */
+ /* */
+ /* subglyphs :: An array of subglyph descriptors for */
+ /* composite glyphs. There are `num_subglyphs' */
+ /* elements in there. Currently internal to */
+ /* FreeType. */
+ /* */
+ /* control_data :: Certain font drivers can also return the */
+ /* control data for a given glyph image (e.g. */
+ /* TrueType bytecode, Type~1 charstrings, etc.). */
+ /* This field is a pointer to such data. */
+ /* */
+ /* control_len :: This is the length in bytes of the control */
+ /* data. */
+ /* */
+ /* other :: Really wicked formats can use this pointer to */
+ /* present their own glyph image to client */
+ /* applications. Note that the application */
+ /* needs to know about the image format. */
+ /* */
+ /* lsb_delta :: The difference between hinted and unhinted */
+ /* left side bearing while auto-hinting is */
+ /* active. Zero otherwise. */
+ /* */
+ /* rsb_delta :: The difference between hinted and unhinted */
+ /* right side bearing while auto-hinting is */
+ /* active. Zero otherwise. */
+ /* */
+ /* <Note> */
+ /* If @FT_Load_Glyph is called with default flags (see */
+ /* @FT_LOAD_DEFAULT) the glyph image is loaded in the glyph slot in */
+ /* its native format (e.g., an outline glyph for TrueType and Type~1 */
+ /* formats). */
+ /* */
+ /* This image can later be converted into a bitmap by calling */
+ /* @FT_Render_Glyph. This function finds the current renderer for */
+ /* the native image's format, then invokes it. */
+ /* */
+ /* The renderer is in charge of transforming the native image through */
+ /* the slot's face transformation fields, then converting it into a */
+ /* bitmap that is returned in `slot->bitmap'. */
+ /* */
+ /* Note that `slot->bitmap_left' and `slot->bitmap_top' are also used */
+ /* to specify the position of the bitmap relative to the current pen */
+ /* position (e.g., coordinates (0,0) on the baseline). Of course, */
+ /* `slot->format' is also changed to @FT_GLYPH_FORMAT_BITMAP. */
+ /* */
+ /* <Note> */
+ /* Here is a small pseudo code fragment that shows how to use */
+ /* `lsb_delta' and `rsb_delta': */
+ /* */
+ /* { */
+ /* FT_Pos origin_x = 0; */
+ /* FT_Pos prev_rsb_delta = 0; */
+ /* */
+ /* */
+ /* for all glyphs do */
+ /* <compute kern between current and previous glyph and add it to */
+ /* `origin_x'> */
+ /* */
+ /* <load glyph with `FT_Load_Glyph'> */
+ /* */
+ /* if ( prev_rsb_delta - face->glyph->lsb_delta >= 32 ) */
+ /* origin_x -= 64; */
+ /* else if ( prev_rsb_delta - face->glyph->lsb_delta < -32 ) */
+ /* origin_x += 64; */
+ /* */
+ /* prev_rsb_delta = face->glyph->rsb_delta; */
+ /* */
+ /* <save glyph image, or render glyph, or ...> */
+ /* */
+ /* origin_x += face->glyph->advance.x; */
+ /* endfor */
+ /* } */
+ /* */
+ typedef struct FT_GlyphSlotRec_
+ {
+ FT_Library library;
+ FT_Face face;
+ FT_GlyphSlot next;
+ FT_UInt reserved; /* retained for binary compatibility */
+ FT_Generic generic;
+
+ FT_Glyph_Metrics metrics;
+ FT_Fixed linearHoriAdvance;
+ FT_Fixed linearVertAdvance;
+ FT_Vector advance;
+
+ FT_Glyph_Format format;
+
+ FT_Bitmap bitmap;
+ FT_Int bitmap_left;
+ FT_Int bitmap_top;
+
+ FT_Outline outline;
+
+ FT_UInt num_subglyphs;
+ FT_SubGlyph subglyphs;
+
+ void* control_data;
+ long control_len;
+
+ FT_Pos lsb_delta;
+ FT_Pos rsb_delta;
+
+ void* other;
+
+ FT_Slot_Internal internal;
+
+ } FT_GlyphSlotRec;
+
+
+ /*************************************************************************/
+ /*************************************************************************/
+ /* */
+ /* F U N C T I O N S */
+ /* */
+ /*************************************************************************/
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Init_FreeType */
+ /* */
+ /* <Description> */
+ /* Initialize a new FreeType library object. The set of modules */
+ /* that are registered by this function is determined at build time. */
+ /* */
+ /* <Output> */
+ /* alibrary :: A handle to a new library object. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* In case you want to provide your own memory allocating routines, */
+ /* use @FT_New_Library instead, followed by a call to */
+ /* @FT_Add_Default_Modules (or a series of calls to @FT_Add_Module). */
+ /* */
+ /* See the documentation of @FT_Library and @FT_Face for */
+ /* multi-threading issues. */
+ /* */
+ /* If you need reference-counting (cf. @FT_Reference_Library), use */
+ /* @FT_New_Library and @FT_Done_Library. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Init_FreeType( FT_Library *alibrary );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Done_FreeType */
+ /* */
+ /* <Description> */
+ /* Destroy a given FreeType library object and all of its children, */
+ /* including resources, drivers, faces, sizes, etc. */
+ /* */
+ /* <Input> */
+ /* library :: A handle to the target library object. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Done_FreeType( FT_Library library );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Enum> */
+ /* FT_OPEN_XXX */
+ /* */
+ /* <Description> */
+ /* A list of bit field constants used within the `flags' field of the */
+ /* @FT_Open_Args structure. */
+ /* */
+ /* <Values> */
+ /* FT_OPEN_MEMORY :: This is a memory-based stream. */
+ /* */
+ /* FT_OPEN_STREAM :: Copy the stream from the `stream' field. */
+ /* */
+ /* FT_OPEN_PATHNAME :: Create a new input stream from a C~path */
+ /* name. */
+ /* */
+ /* FT_OPEN_DRIVER :: Use the `driver' field. */
+ /* */
+ /* FT_OPEN_PARAMS :: Use the `num_params' and `params' fields. */
+ /* */
+ /* <Note> */
+ /* The `FT_OPEN_MEMORY', `FT_OPEN_STREAM', and `FT_OPEN_PATHNAME' */
+ /* flags are mutually exclusive. */
+ /* */
+#define FT_OPEN_MEMORY 0x1
+#define FT_OPEN_STREAM 0x2
+#define FT_OPEN_PATHNAME 0x4
+#define FT_OPEN_DRIVER 0x8
+#define FT_OPEN_PARAMS 0x10
+
+
+ /* these constants are deprecated; use the corresponding `FT_OPEN_XXX' */
+ /* values instead */
+#define ft_open_memory FT_OPEN_MEMORY
+#define ft_open_stream FT_OPEN_STREAM
+#define ft_open_pathname FT_OPEN_PATHNAME
+#define ft_open_driver FT_OPEN_DRIVER
+#define ft_open_params FT_OPEN_PARAMS
+
+
+ /*************************************************************************/
+ /* */
+ /* <Struct> */
+ /* FT_Parameter */
+ /* */
+ /* <Description> */
+ /* A simple structure used to pass more or less generic parameters to */
+ /* @FT_Open_Face. */
+ /* */
+ /* <Fields> */
+ /* tag :: A four-byte identification tag. */
+ /* */
+ /* data :: A pointer to the parameter data. */
+ /* */
+ /* <Note> */
+ /* The ID and function of parameters are driver-specific. See the */
+ /* various FT_PARAM_TAG_XXX flags for more information. */
+ /* */
+ typedef struct FT_Parameter_
+ {
+ FT_ULong tag;
+ FT_Pointer data;
+
+ } FT_Parameter;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Struct> */
+ /* FT_Open_Args */
+ /* */
+ /* <Description> */
+ /* A structure used to indicate how to open a new font file or */
+ /* stream. A pointer to such a structure can be used as a parameter */
+ /* for the functions @FT_Open_Face and @FT_Attach_Stream. */
+ /* */
+ /* <Fields> */
+ /* flags :: A set of bit flags indicating how to use the */
+ /* structure. */
+ /* */
+ /* memory_base :: The first byte of the file in memory. */
+ /* */
+ /* memory_size :: The size in bytes of the file in memory. */
+ /* */
+ /* pathname :: A pointer to an 8-bit file pathname. */
+ /* */
+ /* stream :: A handle to a source stream object. */
+ /* */
+ /* driver :: This field is exclusively used by @FT_Open_Face; */
+ /* it simply specifies the font driver to use to open */
+ /* the face. If set to~0, FreeType tries to load the */
+ /* face with each one of the drivers in its list. */
+ /* */
+ /* num_params :: The number of extra parameters. */
+ /* */
+ /* params :: Extra parameters passed to the font driver when */
+ /* opening a new face. */
+ /* */
+ /* <Note> */
+ /* The stream type is determined by the contents of `flags' that */
+ /* are tested in the following order by @FT_Open_Face: */
+ /* */
+ /* If the @FT_OPEN_MEMORY bit is set, assume that this is a */
+ /* memory file of `memory_size' bytes, located at `memory_address'. */
+ /* The data are are not copied, and the client is responsible for */
+ /* releasing and destroying them _after_ the corresponding call to */
+ /* @FT_Done_Face. */
+ /* */
+ /* Otherwise, if the @FT_OPEN_STREAM bit is set, assume that a */
+ /* custom input stream `stream' is used. */
+ /* */
+ /* Otherwise, if the @FT_OPEN_PATHNAME bit is set, assume that this */
+ /* is a normal file and use `pathname' to open it. */
+ /* */
+ /* If the @FT_OPEN_DRIVER bit is set, @FT_Open_Face only tries to */
+ /* open the file with the driver whose handler is in `driver'. */
+ /* */
+ /* If the @FT_OPEN_PARAMS bit is set, the parameters given by */
+ /* `num_params' and `params' is used. They are ignored otherwise. */
+ /* */
+ /* Ideally, both the `pathname' and `params' fields should be tagged */
+ /* as `const'; this is missing for API backwards compatibility. In */
+ /* other words, applications should treat them as read-only. */
+ /* */
+ typedef struct FT_Open_Args_
+ {
+ FT_UInt flags;
+ const FT_Byte* memory_base;
+ FT_Long memory_size;
+ FT_String* pathname;
+ FT_Stream stream;
+ FT_Module driver;
+ FT_Int num_params;
+ FT_Parameter* params;
+
+ } FT_Open_Args;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_New_Face */
+ /* */
+ /* <Description> */
+ /* This function calls @FT_Open_Face to open a font by its pathname. */
+ /* */
+ /* <InOut> */
+ /* library :: A handle to the library resource. */
+ /* */
+ /* <Input> */
+ /* pathname :: A path to the font file. */
+ /* */
+ /* face_index :: See @FT_Open_Face for a detailed description of this */
+ /* parameter. */
+ /* */
+ /* <Output> */
+ /* aface :: A handle to a new face object. If `face_index' is */
+ /* greater than or equal to zero, it must be non-NULL. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* Use @FT_Done_Face to destroy the created @FT_Face object (along */
+ /* with its slot and sizes). */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_New_Face( FT_Library library,
+ const char* filepathname,
+ FT_Long face_index,
+ FT_Face *aface );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_New_Memory_Face */
+ /* */
+ /* <Description> */
+ /* This function calls @FT_Open_Face to open a font that has been */
+ /* loaded into memory. */
+ /* */
+ /* <InOut> */
+ /* library :: A handle to the library resource. */
+ /* */
+ /* <Input> */
+ /* file_base :: A pointer to the beginning of the font data. */
+ /* */
+ /* file_size :: The size of the memory chunk used by the font data. */
+ /* */
+ /* face_index :: See @FT_Open_Face for a detailed description of this */
+ /* parameter. */
+ /* */
+ /* <Output> */
+ /* aface :: A handle to a new face object. If `face_index' is */
+ /* greater than or equal to zero, it must be non-NULL. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* You must not deallocate the memory before calling @FT_Done_Face. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_New_Memory_Face( FT_Library library,
+ const FT_Byte* file_base,
+ FT_Long file_size,
+ FT_Long face_index,
+ FT_Face *aface );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Open_Face */
+ /* */
+ /* <Description> */
+ /* Create a face object from a given resource described by */
+ /* @FT_Open_Args. */
+ /* */
+ /* <InOut> */
+ /* library :: A handle to the library resource. */
+ /* */
+ /* <Input> */
+ /* args :: A pointer to an `FT_Open_Args' structure that must */
+ /* be filled by the caller. */
+ /* */
+ /* face_index :: This field holds two different values. Bits 0-15 */
+ /* are the index of the face in the font file (starting */
+ /* with value~0). Set it to~0 if there is only one */
+ /* face in the font file. */
+ /* */
+ /* Bits 16-30 are relevant to GX variation fonts only, */
+ /* specifying the named instance index for the current */
+ /* face index (starting with value~1; value~0 makes */
+ /* FreeType ignore named instances). For non-GX fonts, */
+ /* bits 16-30 are ignored. Assuming that you want to */
+ /* access the third named instance in face~4, */
+ /* `face_index' should be set to 0x00030004. If you */
+ /* want to access face~4 without GX variation handling, */
+ /* simply set `face_index' to value~4. */
+ /* */
+ /* FT_Open_Face and its siblings can be used to quickly */
+ /* check whether the font format of a given font */
+ /* resource is supported by FreeType. In general, if */
+ /* the `face_index' argument is negative, the */
+ /* function's return value is~0 if the font format is */
+ /* recognized, or non-zero otherwise. The function */
+ /* allocates a more or less empty face handle in */
+ /* `*aface' (if `aface' isn't NULL); the only two */
+ /* useful fields in this special case are */
+ /* `face->num_faces' and `face->style_flags'. For any */
+ /* negative value of `face_index', `face->num_faces' */
+ /* gives the number of faces within the font file. For */
+ /* the negative value `-(N+1)' (with `N' a 16-bit */
+ /* value), bits 16-30 in `face->style_flags' give the */
+ /* number of named instances in face `N' if we have a */
+ /* GX variation font (or zero otherwise). After */
+ /* examination, the returned @FT_Face structure should */
+ /* be deallocated with a call to @FT_Done_Face. */
+ /* */
+ /* <Output> */
+ /* aface :: A handle to a new face object. If `face_index' is */
+ /* greater than or equal to zero, it must be non-NULL. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* Unlike FreeType 1.x, this function automatically creates a glyph */
+ /* slot for the face object that can be accessed directly through */
+ /* `face->glyph'. */
+ /* */
+ /* Each new face object created with this function also owns a */
+ /* default @FT_Size object, accessible as `face->size'. */
+ /* */
+ /* One @FT_Library instance can have multiple face objects, this is, */
+ /* @FT_Open_Face and its siblings can be called multiple times using */
+ /* the same `library' argument. */
+ /* */
+ /* See the discussion of reference counters in the description of */
+ /* @FT_Reference_Face. */
+ /* */
+ /* To loop over all faces, use code similar to the following snippet */
+ /* (omitting the error handling). */
+ /* */
+ /* { */
+ /* ... */
+ /* FT_Face face; */
+ /* FT_Long i, num_faces; */
+ /* */
+ /* */
+ /* error = FT_Open_Face( library, args, -1, &face ); */
+ /* if ( error ) { ... } */
+ /* */
+ /* num_faces = face->num_faces; */
+ /* FT_Done_Face( face ); */
+ /* */
+ /* for ( i = 0; i < num_faces; i++ ) */
+ /* { */
+ /* ... */
+ /* error = FT_Open_Face( library, args, i, &face ); */
+ /* ... */
+ /* FT_Done_Face( face ); */
+ /* ... */
+ /* } */
+ /* } */
+ /* */
+ /* To loop over all valid values for `face_index', use something */
+ /* similar to the following snippet, again without error handling. */
+ /* The code accesses all faces immediately (thus only a single call */
+ /* of `FT_Open_Face' within the do-loop), with and without named */
+ /* instances. */
+ /* */
+ /* { */
+ /* ... */
+ /* FT_Face face; */
+ /* */
+ /* FT_Long num_faces = 0; */
+ /* FT_Long num_instances = 0; */
+ /* */
+ /* FT_Long face_idx = 0; */
+ /* FT_Long instance_idx = 0; */
+ /* */
+ /* */
+ /* do */
+ /* { */
+ /* FT_Long id = ( instance_idx << 16 ) + face_idx; */
+ /* */
+ /* */
+ /* error = FT_Open_Face( library, args, id, &face ); */
+ /* if ( error ) { ... } */
+ /* */
+ /* num_faces = face->num_faces; */
+ /* num_instances = face->style_flags >> 16; */
+ /* */
+ /* ... */
+ /* */
+ /* FT_Done_Face( face ); */
+ /* */
+ /* if ( instance_idx < num_instances ) */
+ /* instance_idx++; */
+ /* else */
+ /* { */
+ /* face_idx++; */
+ /* instance_idx = 0; */
+ /* } */
+ /* */
+ /* } while ( face_idx < num_faces ) */
+ /* } */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Open_Face( FT_Library library,
+ const FT_Open_Args* args,
+ FT_Long face_index,
+ FT_Face *aface );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Attach_File */
+ /* */
+ /* <Description> */
+ /* This function calls @FT_Attach_Stream to attach a file. */
+ /* */
+ /* <InOut> */
+ /* face :: The target face object. */
+ /* */
+ /* <Input> */
+ /* filepathname :: The pathname. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Attach_File( FT_Face face,
+ const char* filepathname );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Attach_Stream */
+ /* */
+ /* <Description> */
+ /* `Attach' data to a face object. Normally, this is used to read */
+ /* additional information for the face object. For example, you can */
+ /* attach an AFM file that comes with a Type~1 font to get the */
+ /* kerning values and other metrics. */
+ /* */
+ /* <InOut> */
+ /* face :: The target face object. */
+ /* */
+ /* <Input> */
+ /* parameters :: A pointer to @FT_Open_Args that must be filled by */
+ /* the caller. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* The meaning of the `attach' (i.e., what really happens when the */
+ /* new file is read) is not fixed by FreeType itself. It really */
+ /* depends on the font format (and thus the font driver). */
+ /* */
+ /* Client applications are expected to know what they are doing */
+ /* when invoking this function. Most drivers simply do not implement */
+ /* file attachments. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Attach_Stream( FT_Face face,
+ FT_Open_Args* parameters );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Reference_Face */
+ /* */
+ /* <Description> */
+ /* A counter gets initialized to~1 at the time an @FT_Face structure */
+ /* is created. This function increments the counter. @FT_Done_Face */
+ /* then only destroys a face if the counter is~1, otherwise it simply */
+ /* decrements the counter. */
+ /* */
+ /* This function helps in managing life-cycles of structures that */
+ /* reference @FT_Face objects. */
+ /* */
+ /* <Input> */
+ /* face :: A handle to a target face object. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Since> */
+ /* 2.4.2 */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Reference_Face( FT_Face face );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Done_Face */
+ /* */
+ /* <Description> */
+ /* Discard a given face object, as well as all of its child slots and */
+ /* sizes. */
+ /* */
+ /* <Input> */
+ /* face :: A handle to a target face object. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* See the discussion of reference counters in the description of */
+ /* @FT_Reference_Face. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Done_Face( FT_Face face );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Select_Size */
+ /* */
+ /* <Description> */
+ /* Select a bitmap strike. */
+ /* */
+ /* <InOut> */
+ /* face :: A handle to a target face object. */
+ /* */
+ /* <Input> */
+ /* strike_index :: The index of the bitmap strike in the */
+ /* `available_sizes' field of @FT_FaceRec structure. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Select_Size( FT_Face face,
+ FT_Int strike_index );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Enum> */
+ /* FT_Size_Request_Type */
+ /* */
+ /* <Description> */
+ /* An enumeration type that lists the supported size request types. */
+ /* */
+ /* <Values> */
+ /* FT_SIZE_REQUEST_TYPE_NOMINAL :: */
+ /* The nominal size. The `units_per_EM' field of @FT_FaceRec is */
+ /* used to determine both scaling values. */
+ /* */
+ /* FT_SIZE_REQUEST_TYPE_REAL_DIM :: */
+ /* The real dimension. The sum of the the `ascender' and (minus */
+ /* of) the `descender' fields of @FT_FaceRec are used to determine */
+ /* both scaling values. */
+ /* */
+ /* FT_SIZE_REQUEST_TYPE_BBOX :: */
+ /* The font bounding box. The width and height of the `bbox' field */
+ /* of @FT_FaceRec are used to determine the horizontal and vertical */
+ /* scaling value, respectively. */
+ /* */
+ /* FT_SIZE_REQUEST_TYPE_CELL :: */
+ /* The `max_advance_width' field of @FT_FaceRec is used to */
+ /* determine the horizontal scaling value; the vertical scaling */
+ /* value is determined the same way as */
+ /* @FT_SIZE_REQUEST_TYPE_REAL_DIM does. Finally, both scaling */
+ /* values are set to the smaller one. This type is useful if you */
+ /* want to specify the font size for, say, a window of a given */
+ /* dimension and 80x24 cells. */
+ /* */
+ /* FT_SIZE_REQUEST_TYPE_SCALES :: */
+ /* Specify the scaling values directly. */
+ /* */
+ /* <Note> */
+ /* The above descriptions only apply to scalable formats. For bitmap */
+ /* formats, the behaviour is up to the driver. */
+ /* */
+ /* See the note section of @FT_Size_Metrics if you wonder how size */
+ /* requesting relates to scaling values. */
+ /* */
+ typedef enum FT_Size_Request_Type_
+ {
+ FT_SIZE_REQUEST_TYPE_NOMINAL,
+ FT_SIZE_REQUEST_TYPE_REAL_DIM,
+ FT_SIZE_REQUEST_TYPE_BBOX,
+ FT_SIZE_REQUEST_TYPE_CELL,
+ FT_SIZE_REQUEST_TYPE_SCALES,
+
+ FT_SIZE_REQUEST_TYPE_MAX
+
+ } FT_Size_Request_Type;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Struct> */
+ /* FT_Size_RequestRec */
+ /* */
+ /* <Description> */
+ /* A structure used to model a size request. */
+ /* */
+ /* <Fields> */
+ /* type :: See @FT_Size_Request_Type. */
+ /* */
+ /* width :: The desired width. */
+ /* */
+ /* height :: The desired height. */
+ /* */
+ /* horiResolution :: The horizontal resolution. If set to zero, */
+ /* `width' is treated as a 26.6 fractional pixel */
+ /* value. */
+ /* */
+ /* vertResolution :: The vertical resolution. If set to zero, */
+ /* `height' is treated as a 26.6 fractional pixel */
+ /* value. */
+ /* */
+ /* <Note> */
+ /* If `width' is zero, then the horizontal scaling value is set equal */
+ /* to the vertical scaling value, and vice versa. */
+ /* */
+ typedef struct FT_Size_RequestRec_
+ {
+ FT_Size_Request_Type type;
+ FT_Long width;
+ FT_Long height;
+ FT_UInt horiResolution;
+ FT_UInt vertResolution;
+
+ } FT_Size_RequestRec;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Struct> */
+ /* FT_Size_Request */
+ /* */
+ /* <Description> */
+ /* A handle to a size request structure. */
+ /* */
+ typedef struct FT_Size_RequestRec_ *FT_Size_Request;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Request_Size */
+ /* */
+ /* <Description> */
+ /* Resize the scale of the active @FT_Size object in a face. */
+ /* */
+ /* <InOut> */
+ /* face :: A handle to a target face object. */
+ /* */
+ /* <Input> */
+ /* req :: A pointer to a @FT_Size_RequestRec. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* Although drivers may select the bitmap strike matching the */
+ /* request, you should not rely on this if you intend to select a */
+ /* particular bitmap strike. Use @FT_Select_Size instead in that */
+ /* case. */
+ /* */
+ /* The relation between the requested size and the resulting glyph */
+ /* size is dependent entirely on how the size is defined in the */
+ /* source face. The font designer chooses the final size of each */
+ /* glyph relative to this size. For more information refer to */
+ /* `http://www.freetype.org/freetype2/docs/glyphs/glyphs-2.html' */
+ /* */
+ /* Don't use this function if you are using the FreeType cache API. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Request_Size( FT_Face face,
+ FT_Size_Request req );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Set_Char_Size */
+ /* */
+ /* <Description> */
+ /* This function calls @FT_Request_Size to request the nominal size */
+ /* (in points). */
+ /* */
+ /* <InOut> */
+ /* face :: A handle to a target face object. */
+ /* */
+ /* <Input> */
+ /* char_width :: The nominal width, in 26.6 fractional points. */
+ /* */
+ /* char_height :: The nominal height, in 26.6 fractional points. */
+ /* */
+ /* horz_resolution :: The horizontal resolution in dpi. */
+ /* */
+ /* vert_resolution :: The vertical resolution in dpi. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* If either the character width or height is zero, it is set equal */
+ /* to the other value. */
+ /* */
+ /* If either the horizontal or vertical resolution is zero, it is set */
+ /* equal to the other value. */
+ /* */
+ /* A character width or height smaller than 1pt is set to 1pt; if */
+ /* both resolution values are zero, they are set to 72dpi. */
+ /* */
+ /* Don't use this function if you are using the FreeType cache API. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Set_Char_Size( FT_Face face,
+ FT_F26Dot6 char_width,
+ FT_F26Dot6 char_height,
+ FT_UInt horz_resolution,
+ FT_UInt vert_resolution );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Set_Pixel_Sizes */
+ /* */
+ /* <Description> */
+ /* This function calls @FT_Request_Size to request the nominal size */
+ /* (in pixels). */
+ /* */
+ /* <InOut> */
+ /* face :: A handle to the target face object. */
+ /* */
+ /* <Input> */
+ /* pixel_width :: The nominal width, in pixels. */
+ /* */
+ /* pixel_height :: The nominal height, in pixels. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* You should not rely on the resulting glyphs matching, or being */
+ /* constrained, to this pixel size. Refer to @FT_Request_Size to */
+ /* understand how requested sizes relate to actual sizes. */
+ /* */
+ /* Don't use this function if you are using the FreeType cache API. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Set_Pixel_Sizes( FT_Face face,
+ FT_UInt pixel_width,
+ FT_UInt pixel_height );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Load_Glyph */
+ /* */
+ /* <Description> */
+ /* A function used to load a single glyph into the glyph slot of a */
+ /* face object. */
+ /* */
+ /* <InOut> */
+ /* face :: A handle to the target face object where the glyph */
+ /* is loaded. */
+ /* */
+ /* <Input> */
+ /* glyph_index :: The index of the glyph in the font file. For */
+ /* CID-keyed fonts (either in PS or in CFF format) */
+ /* this argument specifies the CID value. */
+ /* */
+ /* load_flags :: A flag indicating what to load for this glyph. The */
+ /* @FT_LOAD_XXX constants can be used to control the */
+ /* glyph loading process (e.g., whether the outline */
+ /* should be scaled, whether to load bitmaps or not, */
+ /* whether to hint the outline, etc). */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* The loaded glyph may be transformed. See @FT_Set_Transform for */
+ /* the details. */
+ /* */
+ /* For subsetted CID-keyed fonts, `FT_Err_Invalid_Argument' is */
+ /* returned for invalid CID values (this is, for CID values that */
+ /* don't have a corresponding glyph in the font). See the discussion */
+ /* of the @FT_FACE_FLAG_CID_KEYED flag for more details. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Load_Glyph( FT_Face face,
+ FT_UInt glyph_index,
+ FT_Int32 load_flags );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Load_Char */
+ /* */
+ /* <Description> */
+ /* A function used to load a single glyph into the glyph slot of a */
+ /* face object, according to its character code. */
+ /* */
+ /* <InOut> */
+ /* face :: A handle to a target face object where the glyph */
+ /* is loaded. */
+ /* */
+ /* <Input> */
+ /* char_code :: The glyph's character code, according to the */
+ /* current charmap used in the face. */
+ /* */
+ /* load_flags :: A flag indicating what to load for this glyph. The */
+ /* @FT_LOAD_XXX constants can be used to control the */
+ /* glyph loading process (e.g., whether the outline */
+ /* should be scaled, whether to load bitmaps or not, */
+ /* whether to hint the outline, etc). */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* This function simply calls @FT_Get_Char_Index and @FT_Load_Glyph. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Load_Char( FT_Face face,
+ FT_ULong char_code,
+ FT_Int32 load_flags );
+
+
+ /*************************************************************************
+ *
+ * @enum:
+ * FT_LOAD_XXX
+ *
+ * @description:
+ * A list of bit field constants used with @FT_Load_Glyph to indicate
+ * what kind of operations to perform during glyph loading.
+ *
+ * @values:
+ * FT_LOAD_DEFAULT ::
+ * Corresponding to~0, this value is used as the default glyph load
+ * operation. In this case, the following happens:
+ *
+ * 1. FreeType looks for a bitmap for the glyph corresponding to the
+ * face's current size. If one is found, the function returns.
+ * The bitmap data can be accessed from the glyph slot (see note
+ * below).
+ *
+ * 2. If no embedded bitmap is searched or found, FreeType looks for a
+ * scalable outline. If one is found, it is loaded from the font
+ * file, scaled to device pixels, then `hinted' to the pixel grid
+ * in order to optimize it. The outline data can be accessed from
+ * the glyph slot (see note below).
+ *
+ * Note that by default, the glyph loader doesn't render outlines into
+ * bitmaps. The following flags are used to modify this default
+ * behaviour to more specific and useful cases.
+ *
+ * FT_LOAD_NO_SCALE ::
+ * Don't scale the loaded outline glyph but keep it in font units.
+ *
+ * This flag implies @FT_LOAD_NO_HINTING and @FT_LOAD_NO_BITMAP, and
+ * unsets @FT_LOAD_RENDER.
+ *
+ * If the font is `tricky' (see @FT_FACE_FLAG_TRICKY for more), using
+ * FT_LOAD_NO_SCALE usually yields meaningless outlines because the
+ * subglyphs must be scaled and positioned with hinting instructions.
+ * This can be solved by loading the font without FT_LOAD_NO_SCALE and
+ * setting the character size to `font->units_per_EM'.
+ *
+ * FT_LOAD_NO_HINTING ::
+ * Disable hinting. This generally generates `blurrier' bitmap glyphs
+ * when the glyph are rendered in any of the anti-aliased modes. See
+ * also the note below.
+ *
+ * This flag is implied by @FT_LOAD_NO_SCALE.
+ *
+ * FT_LOAD_RENDER ::
+ * Call @FT_Render_Glyph after the glyph is loaded. By default, the
+ * glyph is rendered in @FT_RENDER_MODE_NORMAL mode. This can be
+ * overridden by @FT_LOAD_TARGET_XXX or @FT_LOAD_MONOCHROME.
+ *
+ * This flag is unset by @FT_LOAD_NO_SCALE.
+ *
+ * FT_LOAD_NO_BITMAP ::
+ * Ignore bitmap strikes when loading. Bitmap-only fonts ignore this
+ * flag.
+ *
+ * @FT_LOAD_NO_SCALE always sets this flag.
+ *
+ * FT_LOAD_VERTICAL_LAYOUT ::
+ * Load the glyph for vertical text layout. In particular, the
+ * `advance' value in the @FT_GlyphSlotRec structure is set to the
+ * `vertAdvance' value of the `metrics' field.
+ *
+ * In case @FT_HAS_VERTICAL doesn't return true, you shouldn't use
+ * this flag currently. Reason is that in this case vertical metrics
+ * get synthesized, and those values are not always consistent across
+ * various font formats.
+ *
+ * FT_LOAD_FORCE_AUTOHINT ::
+ * Indicates that the auto-hinter is preferred over the font's native
+ * hinter. See also the note below.
+ *
+ * FT_LOAD_PEDANTIC ::
+ * Indicates that the font driver should perform pedantic verifications
+ * during glyph loading. This is mostly used to detect broken glyphs
+ * in fonts. By default, FreeType tries to handle broken fonts also.
+ *
+ * In particular, errors from the TrueType bytecode engine are not
+ * passed to the application if this flag is not set; this might
+ * result in partially hinted or distorted glyphs in case a glyph's
+ * bytecode is buggy.
+ *
+ * FT_LOAD_NO_RECURSE ::
+ * Indicate that the font driver should not load composite glyphs
+ * recursively. Instead, it should set the `num_subglyph' and
+ * `subglyphs' values of the glyph slot accordingly, and set
+ * `glyph->format' to @FT_GLYPH_FORMAT_COMPOSITE. The description of
+ * subglyphs can then be accessed with @FT_Get_SubGlyph_Info.
+ *
+ * This flag implies @FT_LOAD_NO_SCALE and @FT_LOAD_IGNORE_TRANSFORM.
+ *
+ * FT_LOAD_IGNORE_TRANSFORM ::
+ * Indicates that the transform matrix set by @FT_Set_Transform should
+ * be ignored.
+ *
+ * FT_LOAD_MONOCHROME ::
+ * This flag is used with @FT_LOAD_RENDER to indicate that you want to
+ * render an outline glyph to a 1-bit monochrome bitmap glyph, with
+ * 8~pixels packed into each byte of the bitmap data.
+ *
+ * Note that this has no effect on the hinting algorithm used. You
+ * should rather use @FT_LOAD_TARGET_MONO so that the
+ * monochrome-optimized hinting algorithm is used.
+ *
+ * FT_LOAD_LINEAR_DESIGN ::
+ * Indicates that the `linearHoriAdvance' and `linearVertAdvance'
+ * fields of @FT_GlyphSlotRec should be kept in font units. See
+ * @FT_GlyphSlotRec for details.
+ *
+ * FT_LOAD_NO_AUTOHINT ::
+ * Disable auto-hinter. See also the note below.
+ *
+ * FT_LOAD_COLOR ::
+ * This flag is used to request loading of color embedded-bitmap
+ * images. The resulting color bitmaps, if available, will have the
+ * @FT_PIXEL_MODE_BGRA format. When the flag is not used and color
+ * bitmaps are found, they will be converted to 256-level gray
+ * bitmaps transparently. Those bitmaps will be in the
+ * @FT_PIXEL_MODE_GRAY format.
+ *
+ * FT_LOAD_COMPUTE_METRICS ::
+ * This flag sets computing glyph metrics without the use of bundled
+ * metrics tables (for example, the `hdmx' table in TrueType fonts).
+ * Well-behaving fonts have optimized bundled metrics and these should
+ * be used. This flag is mainly used by font validating or font
+ * editing applications, which need to ignore, verify, or edit those
+ * tables.
+ *
+ * Currently, this flag is only implemented for TrueType fonts.
+ *
+ * FT_LOAD_CROP_BITMAP ::
+ * Ignored. Deprecated.
+ *
+ * FT_LOAD_IGNORE_GLOBAL_ADVANCE_WIDTH ::
+ * Ignored. Deprecated.
+ *
+ * @note:
+ * By default, hinting is enabled and the font's native hinter (see
+ * @FT_FACE_FLAG_HINTER) is preferred over the auto-hinter. You can
+ * disable hinting by setting @FT_LOAD_NO_HINTING or change the
+ * precedence by setting @FT_LOAD_FORCE_AUTOHINT. You can also set
+ * @FT_LOAD_NO_AUTOHINT in case you don't want the auto-hinter to be
+ * used at all.
+ *
+ * See the description of @FT_FACE_FLAG_TRICKY for a special exception
+ * (affecting only a handful of Asian fonts).
+ *
+ * Besides deciding which hinter to use, you can also decide which
+ * hinting algorithm to use. See @FT_LOAD_TARGET_XXX for details.
+ *
+ * Note that the auto-hinter needs a valid Unicode cmap (either a native
+ * one or synthesized by FreeType) for producing correct results. If a
+ * font provides an incorrect mapping (for example, assigning the
+ * character code U+005A, LATIN CAPITAL LETTER Z, to a glyph depicting a
+ * mathematical integral sign), the auto-hinter might produce useless
+ * results.
+ *
+ */
+#define FT_LOAD_DEFAULT 0x0
+#define FT_LOAD_NO_SCALE ( 1L << 0 )
+#define FT_LOAD_NO_HINTING ( 1L << 1 )
+#define FT_LOAD_RENDER ( 1L << 2 )
+#define FT_LOAD_NO_BITMAP ( 1L << 3 )
+#define FT_LOAD_VERTICAL_LAYOUT ( 1L << 4 )
+#define FT_LOAD_FORCE_AUTOHINT ( 1L << 5 )
+#define FT_LOAD_CROP_BITMAP ( 1L << 6 )
+#define FT_LOAD_PEDANTIC ( 1L << 7 )
+#define FT_LOAD_IGNORE_GLOBAL_ADVANCE_WIDTH ( 1L << 9 )
+#define FT_LOAD_NO_RECURSE ( 1L << 10 )
+#define FT_LOAD_IGNORE_TRANSFORM ( 1L << 11 )
+#define FT_LOAD_MONOCHROME ( 1L << 12 )
+#define FT_LOAD_LINEAR_DESIGN ( 1L << 13 )
+#define FT_LOAD_NO_AUTOHINT ( 1L << 15 )
+ /* Bits 16..19 are used by `FT_LOAD_TARGET_' */
+#define FT_LOAD_COLOR ( 1L << 20 )
+#define FT_LOAD_COMPUTE_METRICS ( 1L << 21 )
+
+ /* */
+
+ /* used internally only by certain font drivers! */
+#define FT_LOAD_ADVANCE_ONLY ( 1L << 8 )
+#define FT_LOAD_SBITS_ONLY ( 1L << 14 )
+
+
+ /**************************************************************************
+ *
+ * @enum:
+ * FT_LOAD_TARGET_XXX
+ *
+ * @description:
+ * A list of values that are used to select a specific hinting algorithm
+ * to use by the hinter. You should OR one of these values to your
+ * `load_flags' when calling @FT_Load_Glyph.
+ *
+ * Note that font's native hinters may ignore the hinting algorithm you
+ * have specified (e.g., the TrueType bytecode interpreter). You can set
+ * @FT_LOAD_FORCE_AUTOHINT to ensure that the auto-hinter is used.
+ *
+ * @values:
+ * FT_LOAD_TARGET_NORMAL ::
+ * This corresponds to the default hinting algorithm, optimized for
+ * standard gray-level rendering. For monochrome output, use
+ * @FT_LOAD_TARGET_MONO instead.
+ *
+ * FT_LOAD_TARGET_LIGHT ::
+ * A lighter hinting algorithm for gray-level modes. Many generated
+ * glyphs are fuzzier but better resemble their original shape. This
+ * is achieved by snapping glyphs to the pixel grid only vertically
+ * (Y-axis), as is done by Microsoft's ClearType and Adobe's
+ * proprietary font renderer. This preserves inter-glyph spacing in
+ * horizontal text. The snapping is done either by the native font
+ * driver if the driver itself and the font support it or by the
+ * auto-hinter.
+ *
+ * FT_LOAD_TARGET_MONO ::
+ * Strong hinting algorithm that should only be used for monochrome
+ * output. The result is probably unpleasant if the glyph is rendered
+ * in non-monochrome modes.
+ *
+ * FT_LOAD_TARGET_LCD ::
+ * A variant of @FT_LOAD_TARGET_NORMAL optimized for horizontally
+ * decimated LCD displays.
+ *
+ * FT_LOAD_TARGET_LCD_V ::
+ * A variant of @FT_LOAD_TARGET_NORMAL optimized for vertically
+ * decimated LCD displays.
+ *
+ * @note:
+ * You should use only _one_ of the FT_LOAD_TARGET_XXX values in your
+ * `load_flags'. They can't be ORed.
+ *
+ * If @FT_LOAD_RENDER is also set, the glyph is rendered in the
+ * corresponding mode (i.e., the mode that matches the used algorithm
+ * best). An exeption is FT_LOAD_TARGET_MONO since it implies
+ * @FT_LOAD_MONOCHROME.
+ *
+ * You can use a hinting algorithm that doesn't correspond to the same
+ * rendering mode. As an example, it is possible to use the `light'
+ * hinting algorithm and have the results rendered in horizontal LCD
+ * pixel mode, with code like
+ *
+ * {
+ * FT_Load_Glyph( face, glyph_index,
+ * load_flags | FT_LOAD_TARGET_LIGHT );
+ *
+ * FT_Render_Glyph( face->glyph, FT_RENDER_MODE_LCD );
+ * }
+ *
+ */
+#define FT_LOAD_TARGET_( x ) ( (FT_Int32)( (x) & 15 ) << 16 )
+
+#define FT_LOAD_TARGET_NORMAL FT_LOAD_TARGET_( FT_RENDER_MODE_NORMAL )
+#define FT_LOAD_TARGET_LIGHT FT_LOAD_TARGET_( FT_RENDER_MODE_LIGHT )
+#define FT_LOAD_TARGET_MONO FT_LOAD_TARGET_( FT_RENDER_MODE_MONO )
+#define FT_LOAD_TARGET_LCD FT_LOAD_TARGET_( FT_RENDER_MODE_LCD )
+#define FT_LOAD_TARGET_LCD_V FT_LOAD_TARGET_( FT_RENDER_MODE_LCD_V )
+
+
+ /**************************************************************************
+ *
+ * @macro:
+ * FT_LOAD_TARGET_MODE
+ *
+ * @description:
+ * Return the @FT_Render_Mode corresponding to a given
+ * @FT_LOAD_TARGET_XXX value.
+ *
+ */
+#define FT_LOAD_TARGET_MODE( x ) ( (FT_Render_Mode)( ( (x) >> 16 ) & 15 ) )
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Set_Transform */
+ /* */
+ /* <Description> */
+ /* A function used to set the transformation that is applied to glyph */
+ /* images when they are loaded into a glyph slot through */
+ /* @FT_Load_Glyph. */
+ /* */
+ /* <InOut> */
+ /* face :: A handle to the source face object. */
+ /* */
+ /* <Input> */
+ /* matrix :: A pointer to the transformation's 2x2 matrix. Use~0 for */
+ /* the identity matrix. */
+ /* delta :: A pointer to the translation vector. Use~0 for the null */
+ /* vector. */
+ /* */
+ /* <Note> */
+ /* The transformation is only applied to scalable image formats after */
+ /* the glyph has been loaded. It means that hinting is unaltered by */
+ /* the transformation and is performed on the character size given in */
+ /* the last call to @FT_Set_Char_Size or @FT_Set_Pixel_Sizes. */
+ /* */
+ /* Note that this also transforms the `face.glyph.advance' field, but */
+ /* *not* the values in `face.glyph.metrics'. */
+ /* */
+ FT_EXPORT( void )
+ FT_Set_Transform( FT_Face face,
+ FT_Matrix* matrix,
+ FT_Vector* delta );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Enum> */
+ /* FT_Render_Mode */
+ /* */
+ /* <Description> */
+ /* An enumeration type that lists the render modes supported by */
+ /* FreeType~2. Each mode corresponds to a specific type of scanline */
+ /* conversion performed on the outline. */
+ /* */
+ /* For bitmap fonts and embedded bitmaps the `bitmap->pixel_mode' */
+ /* field in the @FT_GlyphSlotRec structure gives the format of the */
+ /* returned bitmap. */
+ /* */
+ /* All modes except @FT_RENDER_MODE_MONO use 256 levels of opacity, */
+ /* indicating pixel coverage. Use linear alpha blending and gamma */
+ /* correction to correctly render non-monochrome glyph bitmaps onto a */
+ /* surface; see @FT_Render_Glyph. */
+ /* */
+ /* <Values> */
+ /* FT_RENDER_MODE_NORMAL :: */
+ /* This is the default render mode; it corresponds to 8-bit */
+ /* anti-aliased bitmaps. */
+ /* */
+ /* FT_RENDER_MODE_LIGHT :: */
+ /* This is equivalent to @FT_RENDER_MODE_NORMAL. It is only */
+ /* defined as a separate value because render modes are also used */
+ /* indirectly to define hinting algorithm selectors. See */
+ /* @FT_LOAD_TARGET_XXX for details. */
+ /* */
+ /* FT_RENDER_MODE_MONO :: */
+ /* This mode corresponds to 1-bit bitmaps (with 2~levels of */
+ /* opacity). */
+ /* */
+ /* FT_RENDER_MODE_LCD :: */
+ /* This mode corresponds to horizontal RGB and BGR sub-pixel */
+ /* displays like LCD screens. It produces 8-bit bitmaps that are */
+ /* 3~times the width of the original glyph outline in pixels, and */
+ /* which use the @FT_PIXEL_MODE_LCD mode. */
+ /* */
+ /* FT_RENDER_MODE_LCD_V :: */
+ /* This mode corresponds to vertical RGB and BGR sub-pixel displays */
+ /* (like PDA screens, rotated LCD displays, etc.). It produces */
+ /* 8-bit bitmaps that are 3~times the height of the original */
+ /* glyph outline in pixels and use the @FT_PIXEL_MODE_LCD_V mode. */
+ /* */
+ /* <Note> */
+ /* The LCD-optimized glyph bitmaps produced by FT_Render_Glyph can be */
+ /* filtered to reduce color-fringes by using @FT_Library_SetLcdFilter */
+ /* (not active in the default builds). It is up to the caller to */
+ /* either call @FT_Library_SetLcdFilter (if available) or do the */
+ /* filtering itself. */
+ /* */
+ /* The selected render mode only affects vector glyphs of a font. */
+ /* Embedded bitmaps often have a different pixel mode like */
+ /* @FT_PIXEL_MODE_MONO. You can use @FT_Bitmap_Convert to transform */
+ /* them into 8-bit pixmaps. */
+ /* */
+ typedef enum FT_Render_Mode_
+ {
+ FT_RENDER_MODE_NORMAL = 0,
+ FT_RENDER_MODE_LIGHT,
+ FT_RENDER_MODE_MONO,
+ FT_RENDER_MODE_LCD,
+ FT_RENDER_MODE_LCD_V,
+
+ FT_RENDER_MODE_MAX
+
+ } FT_Render_Mode;
+
+
+ /* these constants are deprecated; use the corresponding */
+ /* `FT_Render_Mode' values instead */
+#define ft_render_mode_normal FT_RENDER_MODE_NORMAL
+#define ft_render_mode_mono FT_RENDER_MODE_MONO
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Render_Glyph */
+ /* */
+ /* <Description> */
+ /* Convert a given glyph image to a bitmap. It does so by inspecting */
+ /* the glyph image format, finding the relevant renderer, and */
+ /* invoking it. */
+ /* */
+ /* <InOut> */
+ /* slot :: A handle to the glyph slot containing the image to */
+ /* convert. */
+ /* */
+ /* <Input> */
+ /* render_mode :: This is the render mode used to render the glyph */
+ /* image into a bitmap. See @FT_Render_Mode for a */
+ /* list of possible values. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* To get meaningful results, font scaling values must be set with */
+ /* functions like @FT_Set_Char_Size before calling FT_Render_Glyph. */
+ /* */
+ /* When FreeType outputs a bitmap of a glyph, it really outputs an */
+ /* alpha coverage map. If a pixel is completely covered by a */
+ /* filled-in outline, the bitmap contains 0xFF at that pixel, meaning */
+ /* that 0xFF/0xFF fraction of that pixel is covered, meaning the */
+ /* pixel is 100% black (or 0% bright). If a pixel is only 50% */
+ /* covered (value 0x80), the pixel is made 50% black (50% bright or a */
+ /* middle shade of grey). 0% covered means 0% black (100% bright or */
+ /* white). */
+ /* */
+ /* On high-DPI screens like on smartphones and tablets, the pixels */
+ /* are so small that their chance of being completely covered and */
+ /* therefore completely black are fairly good. On the low-DPI */
+ /* screens, however, the situation is different. The pixels are too */
+ /* large for most of the details of a glyph and shades of gray are */
+ /* the norm rather than the exception. */
+ /* */
+ /* This is relevant because all our screens have a second problem: */
+ /* they are not linear. 1~+~1 is not~2. Twice the value does not */
+ /* result in twice the brightness. When a pixel is only 50% covered, */
+ /* the coverage map says 50% black, and this translates to a pixel */
+ /* value of 128 when you use 8~bits per channel (0-255). However, */
+ /* this does not translate to 50% brightness for that pixel on our */
+ /* sRGB and gamma~2.2 screens. Due to their non-linearity, they */
+ /* dwell longer in the darks and only a pixel value of about 186 */
+ /* results in 50% brightness – 128 ends up too dark on both bright */
+ /* and dark backgrounds. The net result is that dark text looks */
+ /* burnt-out, pixely and blotchy on bright background, bright text */
+ /* too frail on dark backgrounds, and colored text on colored */
+ /* background (for example, red on green) seems to have dark halos or */
+ /* `dirt' around it. The situation is especially ugly for diagonal */
+ /* stems like in `w' glyph shapes where the quality of FreeType's */
+ /* anti-aliasing depends on the correct display of grays. On */
+ /* high-DPI screens where smaller, fully black pixels reign supreme, */
+ /* this doesn't matter, but on our low-DPI screens with all the gray */
+ /* shades, it does. 0% and 100% brightness are the same things in */
+ /* linear and non-linear space, just all the shades in-between */
+ /* aren't. */
+ /* */
+ /* The blending function for placing text over a background is */
+ /* */
+ /* { */
+ /* dst = alpha * src + (1 - alpha) * dst , */
+ /* } */
+ /* */
+ /* which is known as the OVER operator. */
+ /* */
+ /* To correctly composite an antialiased pixel of a glyph onto a */
+ /* surface, */
+ /* */
+ /* 1. take the foreground and background colors (e.g., in sRGB space) */
+ /* and apply gamma to get them in a linear space, */
+ /* */
+ /* 2. use OVER to blend the two linear colors using the glyph pixel */
+ /* as the alpha value (remember, the glyph bitmap is an alpha */
+ /* coverage bitmap), and */
+ /* */
+ /* 3. apply inverse gamma to the blended pixel and write it back to */
+ /* the image. */
+ /* */
+ /* Internal testing at Adobe found that a target inverse gamma of~1.8 */
+ /* for step~3 gives good results across a wide range of displays with */
+ /* an sRGB gamma curve or a similar one. */
+ /* */
+ /* This process can cost performance. There is an approximation that */
+ /* does not need to know about the background color; see */
+ /* https://bel.fi/alankila/lcd/ and */
+ /* https://bel.fi/alankila/lcd/alpcor.html for details. */
+ /* */
+ /* *ATTENTION*: Linear blending is even more important when dealing */
+ /* with subpixel-rendered glyphs to prevent color-fringing! A */
+ /* subpixel-rendered glyph must first be filtered with a filter that */
+ /* gives equal weight to the three color primaries and does not */
+ /* exceed a sum of 0x100, see section @lcd_filtering. Then the */
+ /* only difference to gray linear blending is that subpixel-rendered */
+ /* linear blending is done 3~times per pixel: red foreground subpixel */
+ /* to red background subpixel and so on for green and blue. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Render_Glyph( FT_GlyphSlot slot,
+ FT_Render_Mode render_mode );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Enum> */
+ /* FT_Kerning_Mode */
+ /* */
+ /* <Description> */
+ /* An enumeration used to specify which kerning values to return in */
+ /* @FT_Get_Kerning. */
+ /* */
+ /* <Values> */
+ /* FT_KERNING_DEFAULT :: Return grid-fitted kerning distances in */
+ /* pixels (value is~0). Whether they are */
+ /* scaled depends on @FT_LOAD_NO_SCALE. */
+ /* */
+ /* FT_KERNING_UNFITTED :: Return un-grid-fitted kerning distances in */
+ /* 26.6 fractional pixels. Whether they are */
+ /* scaled depends on @FT_LOAD_NO_SCALE. */
+ /* */
+ /* FT_KERNING_UNSCALED :: Return the kerning vector in original font */
+ /* units. */
+ /* */
+ /* <Note> */
+ /* FT_KERNING_DEFAULT returns full pixel values; it also makes */
+ /* FreeType heuristically scale down kerning distances at small ppem */
+ /* values so that they don't become too big. */
+ /* */
+ typedef enum FT_Kerning_Mode_
+ {
+ FT_KERNING_DEFAULT = 0,
+ FT_KERNING_UNFITTED,
+ FT_KERNING_UNSCALED
+
+ } FT_Kerning_Mode;
+
+
+ /* these constants are deprecated; use the corresponding */
+ /* `FT_Kerning_Mode' values instead */
+#define ft_kerning_default FT_KERNING_DEFAULT
+#define ft_kerning_unfitted FT_KERNING_UNFITTED
+#define ft_kerning_unscaled FT_KERNING_UNSCALED
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Get_Kerning */
+ /* */
+ /* <Description> */
+ /* Return the kerning vector between two glyphs of a same face. */
+ /* */
+ /* <Input> */
+ /* face :: A handle to a source face object. */
+ /* */
+ /* left_glyph :: The index of the left glyph in the kern pair. */
+ /* */
+ /* right_glyph :: The index of the right glyph in the kern pair. */
+ /* */
+ /* kern_mode :: See @FT_Kerning_Mode for more information. */
+ /* Determines the scale and dimension of the returned */
+ /* kerning vector. */
+ /* */
+ /* <Output> */
+ /* akerning :: The kerning vector. This is either in font units, */
+ /* fractional pixels (26.6 format), or pixels for */
+ /* scalable formats, and in pixels for fixed-sizes */
+ /* formats. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* Only horizontal layouts (left-to-right & right-to-left) are */
+ /* supported by this method. Other layouts, or more sophisticated */
+ /* kernings, are out of the scope of this API function -- they can be */
+ /* implemented through format-specific interfaces. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Get_Kerning( FT_Face face,
+ FT_UInt left_glyph,
+ FT_UInt right_glyph,
+ FT_UInt kern_mode,
+ FT_Vector *akerning );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Get_Track_Kerning */
+ /* */
+ /* <Description> */
+ /* Return the track kerning for a given face object at a given size. */
+ /* */
+ /* <Input> */
+ /* face :: A handle to a source face object. */
+ /* */
+ /* point_size :: The point size in 16.16 fractional points. */
+ /* */
+ /* degree :: The degree of tightness. Increasingly negative */
+ /* values represent tighter track kerning, while */
+ /* increasingly positive values represent looser track */
+ /* kerning. Value zero means no track kerning. */
+ /* */
+ /* <Output> */
+ /* akerning :: The kerning in 16.16 fractional points, to be */
+ /* uniformly applied between all glyphs. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* Currently, only the Type~1 font driver supports track kerning, */
+ /* using data from AFM files (if attached with @FT_Attach_File or */
+ /* @FT_Attach_Stream). */
+ /* */
+ /* Only very few AFM files come with track kerning data; please refer */
+ /* to the Adobe's AFM specification for more details. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Get_Track_Kerning( FT_Face face,
+ FT_Fixed point_size,
+ FT_Int degree,
+ FT_Fixed* akerning );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Get_Glyph_Name */
+ /* */
+ /* <Description> */
+ /* Retrieve the ASCII name of a given glyph in a face. This only */
+ /* works for those faces where @FT_HAS_GLYPH_NAMES(face) returns~1. */
+ /* */
+ /* <Input> */
+ /* face :: A handle to a source face object. */
+ /* */
+ /* glyph_index :: The glyph index. */
+ /* */
+ /* buffer_max :: The maximum number of bytes available in the */
+ /* buffer. */
+ /* */
+ /* <Output> */
+ /* buffer :: A pointer to a target buffer where the name is */
+ /* copied to. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* An error is returned if the face doesn't provide glyph names or if */
+ /* the glyph index is invalid. In all cases of failure, the first */
+ /* byte of `buffer' is set to~0 to indicate an empty name. */
+ /* */
+ /* The glyph name is truncated to fit within the buffer if it is too */
+ /* long. The returned string is always zero-terminated. */
+ /* */
+ /* Be aware that FreeType reorders glyph indices internally so that */
+ /* glyph index~0 always corresponds to the `missing glyph' (called */
+ /* `.notdef'). */
+ /* */
+ /* This function always returns an error if the config macro */
+ /* `FT_CONFIG_OPTION_NO_GLYPH_NAMES' is not defined in `ftoptions.h'. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Get_Glyph_Name( FT_Face face,
+ FT_UInt glyph_index,
+ FT_Pointer buffer,
+ FT_UInt buffer_max );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Get_Postscript_Name */
+ /* */
+ /* <Description> */
+ /* Retrieve the ASCII PostScript name of a given face, if available. */
+ /* This only works with PostScript and TrueType fonts. */
+ /* */
+ /* <Input> */
+ /* face :: A handle to the source face object. */
+ /* */
+ /* <Return> */
+ /* A pointer to the face's PostScript name. NULL if unavailable. */
+ /* */
+ /* <Note> */
+ /* The returned pointer is owned by the face and is destroyed with */
+ /* it. */
+ /* */
+ FT_EXPORT( const char* )
+ FT_Get_Postscript_Name( FT_Face face );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Select_Charmap */
+ /* */
+ /* <Description> */
+ /* Select a given charmap by its encoding tag (as listed in */
+ /* `freetype.h'). */
+ /* */
+ /* <InOut> */
+ /* face :: A handle to the source face object. */
+ /* */
+ /* <Input> */
+ /* encoding :: A handle to the selected encoding. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* This function returns an error if no charmap in the face */
+ /* corresponds to the encoding queried here. */
+ /* */
+ /* Because many fonts contain more than a single cmap for Unicode */
+ /* encoding, this function has some special code to select the one */
+ /* that covers Unicode best (`best' in the sense that a UCS-4 cmap is */
+ /* preferred to a UCS-2 cmap). It is thus preferable to */
+ /* @FT_Set_Charmap in this case. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Select_Charmap( FT_Face face,
+ FT_Encoding encoding );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Set_Charmap */
+ /* */
+ /* <Description> */
+ /* Select a given charmap for character code to glyph index mapping. */
+ /* */
+ /* <InOut> */
+ /* face :: A handle to the source face object. */
+ /* */
+ /* <Input> */
+ /* charmap :: A handle to the selected charmap. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* This function returns an error if the charmap is not part of */
+ /* the face (i.e., if it is not listed in the `face->charmaps' */
+ /* table). */
+ /* */
+ /* It also fails if a type~14 charmap is selected. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Set_Charmap( FT_Face face,
+ FT_CharMap charmap );
+
+
+ /*************************************************************************
+ *
+ * @function:
+ * FT_Get_Charmap_Index
+ *
+ * @description:
+ * Retrieve index of a given charmap.
+ *
+ * @input:
+ * charmap ::
+ * A handle to a charmap.
+ *
+ * @return:
+ * The index into the array of character maps within the face to which
+ * `charmap' belongs. If an error occurs, -1 is returned.
+ *
+ */
+ FT_EXPORT( FT_Int )
+ FT_Get_Charmap_Index( FT_CharMap charmap );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Get_Char_Index */
+ /* */
+ /* <Description> */
+ /* Return the glyph index of a given character code. This function */
+ /* uses a charmap object to do the mapping. */
+ /* */
+ /* <Input> */
+ /* face :: A handle to the source face object. */
+ /* */
+ /* charcode :: The character code. */
+ /* */
+ /* <Return> */
+ /* The glyph index. 0~means `undefined character code'. */
+ /* */
+ /* <Note> */
+ /* If you use FreeType to manipulate the contents of font files */
+ /* directly, be aware that the glyph index returned by this function */
+ /* doesn't always correspond to the internal indices used within the */
+ /* file. This is done to ensure that value~0 always corresponds to */
+ /* the `missing glyph'. If the first glyph is not named `.notdef', */
+ /* then for Type~1 and Type~42 fonts, `.notdef' will be moved into */
+ /* the glyph ID~0 position, and whatever was there will be moved to */
+ /* the position `.notdef' had. For Type~1 fonts, if there is no */
+ /* `.notdef' glyph at all, then one will be created at index~0 and */
+ /* whatever was there will be moved to the last index -- Type~42 */
+ /* fonts are considered invalid under this condition. */
+ /* */
+ FT_EXPORT( FT_UInt )
+ FT_Get_Char_Index( FT_Face face,
+ FT_ULong charcode );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Get_First_Char */
+ /* */
+ /* <Description> */
+ /* This function is used to return the first character code in the */
+ /* current charmap of a given face. It also returns the */
+ /* corresponding glyph index. */
+ /* */
+ /* <Input> */
+ /* face :: A handle to the source face object. */
+ /* */
+ /* <Output> */
+ /* agindex :: Glyph index of first character code. 0~if charmap is */
+ /* empty. */
+ /* */
+ /* <Return> */
+ /* The charmap's first character code. */
+ /* */
+ /* <Note> */
+ /* You should use this function with @FT_Get_Next_Char to be able to */
+ /* parse all character codes available in a given charmap. The code */
+ /* should look like this: */
+ /* */
+ /* { */
+ /* FT_ULong charcode; */
+ /* FT_UInt gindex; */
+ /* */
+ /* */
+ /* charcode = FT_Get_First_Char( face, &gindex ); */
+ /* while ( gindex != 0 ) */
+ /* { */
+ /* ... do something with (charcode,gindex) pair ... */
+ /* */
+ /* charcode = FT_Get_Next_Char( face, charcode, &gindex ); */
+ /* } */
+ /* } */
+ /* */
+ /* Be aware that character codes can have values up to 0xFFFFFFFF; */
+ /* this might happen for non-Unicode or malformed cmaps. However, */
+ /* even with regular Unicode encoding, so-called `last resort fonts' */
+ /* (using SFNT cmap format 13, see function @FT_Get_CMap_Format) */
+ /* normally have entries for all Unicode characters up to 0x1FFFFF, */
+ /* which can cause *a lot* of iterations. */
+ /* */
+ /* Note that `*agindex' is set to~0 if the charmap is empty. The */
+ /* result itself can be~0 in two cases: if the charmap is empty or */
+ /* if the value~0 is the first valid character code. */
+ /* */
+ FT_EXPORT( FT_ULong )
+ FT_Get_First_Char( FT_Face face,
+ FT_UInt *agindex );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Get_Next_Char */
+ /* */
+ /* <Description> */
+ /* This function is used to return the next character code in the */
+ /* current charmap of a given face following the value `char_code', */
+ /* as well as the corresponding glyph index. */
+ /* */
+ /* <Input> */
+ /* face :: A handle to the source face object. */
+ /* char_code :: The starting character code. */
+ /* */
+ /* <Output> */
+ /* agindex :: Glyph index of next character code. 0~if charmap */
+ /* is empty. */
+ /* */
+ /* <Return> */
+ /* The charmap's next character code. */
+ /* */
+ /* <Note> */
+ /* You should use this function with @FT_Get_First_Char to walk */
+ /* over all character codes available in a given charmap. See the */
+ /* note for this function for a simple code example. */
+ /* */
+ /* Note that `*agindex' is set to~0 when there are no more codes in */
+ /* the charmap. */
+ /* */
+ FT_EXPORT( FT_ULong )
+ FT_Get_Next_Char( FT_Face face,
+ FT_ULong char_code,
+ FT_UInt *agindex );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Get_Name_Index */
+ /* */
+ /* <Description> */
+ /* Return the glyph index of a given glyph name. This function uses */
+ /* driver specific objects to do the translation. */
+ /* */
+ /* <Input> */
+ /* face :: A handle to the source face object. */
+ /* */
+ /* glyph_name :: The glyph name. */
+ /* */
+ /* <Return> */
+ /* The glyph index. 0~means `undefined character code'. */
+ /* */
+ FT_EXPORT( FT_UInt )
+ FT_Get_Name_Index( FT_Face face,
+ FT_String* glyph_name );
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_SUBGLYPH_FLAG_XXX
+ *
+ * @description:
+ * A list of constants used to describe subglyphs. Please refer to the
+ * TrueType specification for the meaning of the various flags.
+ *
+ * @values:
+ * FT_SUBGLYPH_FLAG_ARGS_ARE_WORDS ::
+ * FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES ::
+ * FT_SUBGLYPH_FLAG_ROUND_XY_TO_GRID ::
+ * FT_SUBGLYPH_FLAG_SCALE ::
+ * FT_SUBGLYPH_FLAG_XY_SCALE ::
+ * FT_SUBGLYPH_FLAG_2X2 ::
+ * FT_SUBGLYPH_FLAG_USE_MY_METRICS ::
+ *
+ */
+#define FT_SUBGLYPH_FLAG_ARGS_ARE_WORDS 1
+#define FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES 2
+#define FT_SUBGLYPH_FLAG_ROUND_XY_TO_GRID 4
+#define FT_SUBGLYPH_FLAG_SCALE 8
+#define FT_SUBGLYPH_FLAG_XY_SCALE 0x40
+#define FT_SUBGLYPH_FLAG_2X2 0x80
+#define FT_SUBGLYPH_FLAG_USE_MY_METRICS 0x200
+
+
+ /*************************************************************************
+ *
+ * @func:
+ * FT_Get_SubGlyph_Info
+ *
+ * @description:
+ * Retrieve a description of a given subglyph. Only use it if
+ * `glyph->format' is @FT_GLYPH_FORMAT_COMPOSITE; an error is
+ * returned otherwise.
+ *
+ * @input:
+ * glyph ::
+ * The source glyph slot.
+ *
+ * sub_index ::
+ * The index of the subglyph. Must be less than
+ * `glyph->num_subglyphs'.
+ *
+ * @output:
+ * p_index ::
+ * The glyph index of the subglyph.
+ *
+ * p_flags ::
+ * The subglyph flags, see @FT_SUBGLYPH_FLAG_XXX.
+ *
+ * p_arg1 ::
+ * The subglyph's first argument (if any).
+ *
+ * p_arg2 ::
+ * The subglyph's second argument (if any).
+ *
+ * p_transform ::
+ * The subglyph transformation (if any).
+ *
+ * @return:
+ * FreeType error code. 0~means success.
+ *
+ * @note:
+ * The values of `*p_arg1', `*p_arg2', and `*p_transform' must be
+ * interpreted depending on the flags returned in `*p_flags'. See the
+ * TrueType specification for details.
+ *
+ */
+ FT_EXPORT( FT_Error )
+ FT_Get_SubGlyph_Info( FT_GlyphSlot glyph,
+ FT_UInt sub_index,
+ FT_Int *p_index,
+ FT_UInt *p_flags,
+ FT_Int *p_arg1,
+ FT_Int *p_arg2,
+ FT_Matrix *p_transform );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Enum> */
+ /* FT_FSTYPE_XXX */
+ /* */
+ /* <Description> */
+ /* A list of bit flags used in the `fsType' field of the OS/2 table */
+ /* in a TrueType or OpenType font and the `FSType' entry in a */
+ /* PostScript font. These bit flags are returned by */
+ /* @FT_Get_FSType_Flags; they inform client applications of embedding */
+ /* and subsetting restrictions associated with a font. */
+ /* */
+ /* See */
+ /* http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/FontPolicies.pdf */
+ /* for more details. */
+ /* */
+ /* <Values> */
+ /* FT_FSTYPE_INSTALLABLE_EMBEDDING :: */
+ /* Fonts with no fsType bit set may be embedded and permanently */
+ /* installed on the remote system by an application. */
+ /* */
+ /* FT_FSTYPE_RESTRICTED_LICENSE_EMBEDDING :: */
+ /* Fonts that have only this bit set must not be modified, embedded */
+ /* or exchanged in any manner without first obtaining permission of */
+ /* the font software copyright owner. */
+ /* */
+ /* FT_FSTYPE_PREVIEW_AND_PRINT_EMBEDDING :: */
+ /* If this bit is set, the font may be embedded and temporarily */
+ /* loaded on the remote system. Documents containing Preview & */
+ /* Print fonts must be opened `read-only'; no edits can be applied */
+ /* to the document. */
+ /* */
+ /* FT_FSTYPE_EDITABLE_EMBEDDING :: */
+ /* If this bit is set, the font may be embedded but must only be */
+ /* installed temporarily on other systems. In contrast to Preview */
+ /* & Print fonts, documents containing editable fonts may be opened */
+ /* for reading, editing is permitted, and changes may be saved. */
+ /* */
+ /* FT_FSTYPE_NO_SUBSETTING :: */
+ /* If this bit is set, the font may not be subsetted prior to */
+ /* embedding. */
+ /* */
+ /* FT_FSTYPE_BITMAP_EMBEDDING_ONLY :: */
+ /* If this bit is set, only bitmaps contained in the font may be */
+ /* embedded; no outline data may be embedded. If there are no */
+ /* bitmaps available in the font, then the font is unembeddable. */
+ /* */
+ /* <Note> */
+ /* The flags are ORed together, thus more than a single value can be */
+ /* returned. */
+ /* */
+ /* While the fsType flags can indicate that a font may be embedded, a */
+ /* license with the font vendor may be separately required to use the */
+ /* font in this way. */
+ /* */
+#define FT_FSTYPE_INSTALLABLE_EMBEDDING 0x0000
+#define FT_FSTYPE_RESTRICTED_LICENSE_EMBEDDING 0x0002
+#define FT_FSTYPE_PREVIEW_AND_PRINT_EMBEDDING 0x0004
+#define FT_FSTYPE_EDITABLE_EMBEDDING 0x0008
+#define FT_FSTYPE_NO_SUBSETTING 0x0100
+#define FT_FSTYPE_BITMAP_EMBEDDING_ONLY 0x0200
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Get_FSType_Flags */
+ /* */
+ /* <Description> */
+ /* Return the fsType flags for a font. */
+ /* */
+ /* <Input> */
+ /* face :: A handle to the source face object. */
+ /* */
+ /* <Return> */
+ /* The fsType flags, @FT_FSTYPE_XXX. */
+ /* */
+ /* <Note> */
+ /* Use this function rather than directly reading the `fs_type' field */
+ /* in the @PS_FontInfoRec structure, which is only guaranteed to */
+ /* return the correct results for Type~1 fonts. */
+ /* */
+ /* <Since> */
+ /* 2.3.8 */
+ /* */
+ FT_EXPORT( FT_UShort )
+ FT_Get_FSType_Flags( FT_Face face );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* glyph_variants */
+ /* */
+ /* <Title> */
+ /* Glyph Variants */
+ /* */
+ /* <Abstract> */
+ /* The FreeType~2 interface to Unicode Ideographic Variation */
+ /* Sequences (IVS), using the SFNT cmap format~14. */
+ /* */
+ /* <Description> */
+ /* Many CJK characters have variant forms. They are a sort of grey */
+ /* area somewhere between being totally irrelevant and semantically */
+ /* distinct; for this reason, the Unicode consortium decided to */
+ /* introduce Ideographic Variation Sequences (IVS), consisting of a */
+ /* Unicode base character and one of 240 variant selectors */
+ /* (U+E0100-U+E01EF), instead of further extending the already huge */
+ /* code range for CJK characters. */
+ /* */
+ /* An IVS is registered and unique; for further details please refer */
+ /* to Unicode Technical Standard #37, the Ideographic Variation */
+ /* Database: */
+ /* */
+ /* http://www.unicode.org/reports/tr37/ */
+ /* */
+ /* To date (November 2014), the character with the most variants is */
+ /* U+9089, having 32 such IVS. */
+ /* */
+ /* Adobe and MS decided to support IVS with a new cmap subtable */
+ /* (format~14). It is an odd subtable because it is not a mapping of */
+ /* input code points to glyphs, but contains lists of all variants */
+ /* supported by the font. */
+ /* */
+ /* A variant may be either `default' or `non-default'. A default */
+ /* variant is the one you will get for that code point if you look it */
+ /* up in the standard Unicode cmap. A non-default variant is a */
+ /* different glyph. */
+ /* */
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Face_GetCharVariantIndex */
+ /* */
+ /* <Description> */
+ /* Return the glyph index of a given character code as modified by */
+ /* the variation selector. */
+ /* */
+ /* <Input> */
+ /* face :: */
+ /* A handle to the source face object. */
+ /* */
+ /* charcode :: */
+ /* The character code point in Unicode. */
+ /* */
+ /* variantSelector :: */
+ /* The Unicode code point of the variation selector. */
+ /* */
+ /* <Return> */
+ /* The glyph index. 0~means either `undefined character code', or */
+ /* `undefined selector code', or `no variation selector cmap */
+ /* subtable', or `current CharMap is not Unicode'. */
+ /* */
+ /* <Note> */
+ /* If you use FreeType to manipulate the contents of font files */
+ /* directly, be aware that the glyph index returned by this function */
+ /* doesn't always correspond to the internal indices used within */
+ /* the file. This is done to ensure that value~0 always corresponds */
+ /* to the `missing glyph'. */
+ /* */
+ /* This function is only meaningful if */
+ /* a) the font has a variation selector cmap sub table, */
+ /* and */
+ /* b) the current charmap has a Unicode encoding. */
+ /* */
+ /* <Since> */
+ /* 2.3.6 */
+ /* */
+ FT_EXPORT( FT_UInt )
+ FT_Face_GetCharVariantIndex( FT_Face face,
+ FT_ULong charcode,
+ FT_ULong variantSelector );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Face_GetCharVariantIsDefault */
+ /* */
+ /* <Description> */
+ /* Check whether this variant of this Unicode character is the one to */
+ /* be found in the `cmap'. */
+ /* */
+ /* <Input> */
+ /* face :: */
+ /* A handle to the source face object. */
+ /* */
+ /* charcode :: */
+ /* The character codepoint in Unicode. */
+ /* */
+ /* variantSelector :: */
+ /* The Unicode codepoint of the variation selector. */
+ /* */
+ /* <Return> */
+ /* 1~if found in the standard (Unicode) cmap, 0~if found in the */
+ /* variation selector cmap, or -1 if it is not a variant. */
+ /* */
+ /* <Note> */
+ /* This function is only meaningful if the font has a variation */
+ /* selector cmap subtable. */
+ /* */
+ /* <Since> */
+ /* 2.3.6 */
+ /* */
+ FT_EXPORT( FT_Int )
+ FT_Face_GetCharVariantIsDefault( FT_Face face,
+ FT_ULong charcode,
+ FT_ULong variantSelector );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Face_GetVariantSelectors */
+ /* */
+ /* <Description> */
+ /* Return a zero-terminated list of Unicode variant selectors found */
+ /* in the font. */
+ /* */
+ /* <Input> */
+ /* face :: */
+ /* A handle to the source face object. */
+ /* */
+ /* <Return> */
+ /* A pointer to an array of selector code points, or NULL if there is */
+ /* no valid variant selector cmap subtable. */
+ /* */
+ /* <Note> */
+ /* The last item in the array is~0; the array is owned by the */
+ /* @FT_Face object but can be overwritten or released on the next */
+ /* call to a FreeType function. */
+ /* */
+ /* <Since> */
+ /* 2.3.6 */
+ /* */
+ FT_EXPORT( FT_UInt32* )
+ FT_Face_GetVariantSelectors( FT_Face face );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Face_GetVariantsOfChar */
+ /* */
+ /* <Description> */
+ /* Return a zero-terminated list of Unicode variant selectors found */
+ /* for the specified character code. */
+ /* */
+ /* <Input> */
+ /* face :: */
+ /* A handle to the source face object. */
+ /* */
+ /* charcode :: */
+ /* The character codepoint in Unicode. */
+ /* */
+ /* <Return> */
+ /* A pointer to an array of variant selector code points that are */
+ /* active for the given character, or NULL if the corresponding list */
+ /* is empty. */
+ /* */
+ /* <Note> */
+ /* The last item in the array is~0; the array is owned by the */
+ /* @FT_Face object but can be overwritten or released on the next */
+ /* call to a FreeType function. */
+ /* */
+ /* <Since> */
+ /* 2.3.6 */
+ /* */
+ FT_EXPORT( FT_UInt32* )
+ FT_Face_GetVariantsOfChar( FT_Face face,
+ FT_ULong charcode );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Face_GetCharsOfVariant */
+ /* */
+ /* <Description> */
+ /* Return a zero-terminated list of Unicode character codes found for */
+ /* the specified variant selector. */
+ /* */
+ /* <Input> */
+ /* face :: */
+ /* A handle to the source face object. */
+ /* */
+ /* variantSelector :: */
+ /* The variant selector code point in Unicode. */
+ /* */
+ /* <Return> */
+ /* A list of all the code points that are specified by this selector */
+ /* (both default and non-default codes are returned) or NULL if there */
+ /* is no valid cmap or the variant selector is invalid. */
+ /* */
+ /* <Note> */
+ /* The last item in the array is~0; the array is owned by the */
+ /* @FT_Face object but can be overwritten or released on the next */
+ /* call to a FreeType function. */
+ /* */
+ /* <Since> */
+ /* 2.3.6 */
+ /* */
+ FT_EXPORT( FT_UInt32* )
+ FT_Face_GetCharsOfVariant( FT_Face face,
+ FT_ULong variantSelector );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* computations */
+ /* */
+ /* <Title> */
+ /* Computations */
+ /* */
+ /* <Abstract> */
+ /* Crunching fixed numbers and vectors. */
+ /* */
+ /* <Description> */
+ /* This section contains various functions used to perform */
+ /* computations on 16.16 fixed-float numbers or 2d vectors. */
+ /* */
+ /* <Order> */
+ /* FT_MulDiv */
+ /* FT_MulFix */
+ /* FT_DivFix */
+ /* FT_RoundFix */
+ /* FT_CeilFix */
+ /* FT_FloorFix */
+ /* FT_Vector_Transform */
+ /* FT_Matrix_Multiply */
+ /* FT_Matrix_Invert */
+ /* */
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_MulDiv */
+ /* */
+ /* <Description> */
+ /* A very simple function used to perform the computation `(a*b)/c' */
+ /* with maximum accuracy (it uses a 64-bit intermediate integer */
+ /* whenever necessary). */
+ /* */
+ /* This function isn't necessarily as fast as some processor specific */
+ /* operations, but is at least completely portable. */
+ /* */
+ /* <Input> */
+ /* a :: The first multiplier. */
+ /* b :: The second multiplier. */
+ /* c :: The divisor. */
+ /* */
+ /* <Return> */
+ /* The result of `(a*b)/c'. This function never traps when trying to */
+ /* divide by zero; it simply returns `MaxInt' or `MinInt' depending */
+ /* on the signs of `a' and `b'. */
+ /* */
+ FT_EXPORT( FT_Long )
+ FT_MulDiv( FT_Long a,
+ FT_Long b,
+ FT_Long c );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_MulFix */
+ /* */
+ /* <Description> */
+ /* A very simple function used to perform the computation */
+ /* `(a*b)/0x10000' with maximum accuracy. Most of the time this is */
+ /* used to multiply a given value by a 16.16 fixed-point factor. */
+ /* */
+ /* <Input> */
+ /* a :: The first multiplier. */
+ /* b :: The second multiplier. Use a 16.16 factor here whenever */
+ /* possible (see note below). */
+ /* */
+ /* <Return> */
+ /* The result of `(a*b)/0x10000'. */
+ /* */
+ /* <Note> */
+ /* This function has been optimized for the case where the absolute */
+ /* value of `a' is less than 2048, and `b' is a 16.16 scaling factor. */
+ /* As this happens mainly when scaling from notional units to */
+ /* fractional pixels in FreeType, it resulted in noticeable speed */
+ /* improvements between versions 2.x and 1.x. */
+ /* */
+ /* As a conclusion, always try to place a 16.16 factor as the */
+ /* _second_ argument of this function; this can make a great */
+ /* difference. */
+ /* */
+ FT_EXPORT( FT_Long )
+ FT_MulFix( FT_Long a,
+ FT_Long b );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_DivFix */
+ /* */
+ /* <Description> */
+ /* A very simple function used to perform the computation */
+ /* `(a*0x10000)/b' with maximum accuracy. Most of the time, this is */
+ /* used to divide a given value by a 16.16 fixed-point factor. */
+ /* */
+ /* <Input> */
+ /* a :: The numerator. */
+ /* b :: The denominator. Use a 16.16 factor here. */
+ /* */
+ /* <Return> */
+ /* The result of `(a*0x10000)/b'. */
+ /* */
+ FT_EXPORT( FT_Long )
+ FT_DivFix( FT_Long a,
+ FT_Long b );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_RoundFix */
+ /* */
+ /* <Description> */
+ /* A very simple function used to round a 16.16 fixed number. */
+ /* */
+ /* <Input> */
+ /* a :: The number to be rounded. */
+ /* */
+ /* <Return> */
+ /* `a' rounded to nearest 16.16 fixed integer, halfway cases away */
+ /* from zero. */
+ /* */
+ FT_EXPORT( FT_Fixed )
+ FT_RoundFix( FT_Fixed a );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_CeilFix */
+ /* */
+ /* <Description> */
+ /* A very simple function used to compute the ceiling function of a */
+ /* 16.16 fixed number. */
+ /* */
+ /* <Input> */
+ /* a :: The number for which the ceiling function is to be computed. */
+ /* */
+ /* <Return> */
+ /* `a' rounded towards plus infinity. */
+ /* */
+ FT_EXPORT( FT_Fixed )
+ FT_CeilFix( FT_Fixed a );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_FloorFix */
+ /* */
+ /* <Description> */
+ /* A very simple function used to compute the floor function of a */
+ /* 16.16 fixed number. */
+ /* */
+ /* <Input> */
+ /* a :: The number for which the floor function is to be computed. */
+ /* */
+ /* <Return> */
+ /* `a' rounded towards minus infinity. */
+ /* */
+ FT_EXPORT( FT_Fixed )
+ FT_FloorFix( FT_Fixed a );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Vector_Transform */
+ /* */
+ /* <Description> */
+ /* Transform a single vector through a 2x2 matrix. */
+ /* */
+ /* <InOut> */
+ /* vector :: The target vector to transform. */
+ /* */
+ /* <Input> */
+ /* matrix :: A pointer to the source 2x2 matrix. */
+ /* */
+ /* <Note> */
+ /* The result is undefined if either `vector' or `matrix' is invalid. */
+ /* */
+ FT_EXPORT( void )
+ FT_Vector_Transform( FT_Vector* vec,
+ const FT_Matrix* matrix );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* version */
+ /* */
+ /* <Title> */
+ /* FreeType Version */
+ /* */
+ /* <Abstract> */
+ /* Functions and macros related to FreeType versions. */
+ /* */
+ /* <Description> */
+ /* Note that those functions and macros are of limited use because */
+ /* even a new release of FreeType with only documentation changes */
+ /* increases the version number. */
+ /* */
+ /* <Order> */
+ /* FT_Library_Version */
+ /* */
+ /* FREETYPE_MAJOR */
+ /* FREETYPE_MINOR */
+ /* FREETYPE_PATCH */
+ /* */
+ /* FT_Face_CheckTrueTypePatents */
+ /* FT_Face_SetUnpatentedHinting */
+ /* */
+ /* FREETYPE_XXX */
+ /* */
+ /*************************************************************************/
+
+
+ /*************************************************************************
+ *
+ * @enum:
+ * FREETYPE_XXX
+ *
+ * @description:
+ * These three macros identify the FreeType source code version.
+ * Use @FT_Library_Version to access them at runtime.
+ *
+ * @values:
+ * FREETYPE_MAJOR :: The major version number.
+ * FREETYPE_MINOR :: The minor version number.
+ * FREETYPE_PATCH :: The patch level.
+ *
+ * @note:
+ * The version number of FreeType if built as a dynamic link library
+ * with the `libtool' package is _not_ controlled by these three
+ * macros.
+ *
+ */
+#define FREETYPE_MAJOR 2
+#define FREETYPE_MINOR 6
+#define FREETYPE_PATCH 2
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Library_Version */
+ /* */
+ /* <Description> */
+ /* Return the version of the FreeType library being used. This is */
+ /* useful when dynamically linking to the library, since one cannot */
+ /* use the macros @FREETYPE_MAJOR, @FREETYPE_MINOR, and */
+ /* @FREETYPE_PATCH. */
+ /* */
+ /* <Input> */
+ /* library :: A source library handle. */
+ /* */
+ /* <Output> */
+ /* amajor :: The major version number. */
+ /* */
+ /* aminor :: The minor version number. */
+ /* */
+ /* apatch :: The patch version number. */
+ /* */
+ /* <Note> */
+ /* The reason why this function takes a `library' argument is because */
+ /* certain programs implement library initialization in a custom way */
+ /* that doesn't use @FT_Init_FreeType. */
+ /* */
+ /* In such cases, the library version might not be available before */
+ /* the library object has been created. */
+ /* */
+ FT_EXPORT( void )
+ FT_Library_Version( FT_Library library,
+ FT_Int *amajor,
+ FT_Int *aminor,
+ FT_Int *apatch );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Face_CheckTrueTypePatents */
+ /* */
+ /* <Description> */
+ /* Parse all bytecode instructions of a TrueType font file to check */
+ /* whether any of the patented opcodes are used. This is only useful */
+ /* if you want to be able to use the unpatented hinter with */
+ /* fonts that do *not* use these opcodes. */
+ /* */
+ /* Note that this function parses *all* glyph instructions in the */
+ /* font file, which may be slow. */
+ /* */
+ /* <Input> */
+ /* face :: A face handle. */
+ /* */
+ /* <Return> */
+ /* 1~if this is a TrueType font that uses one of the patented */
+ /* opcodes, 0~otherwise. */
+ /* */
+ /* <Note> */
+ /* Since May 2010, TrueType hinting is no longer patented. */
+ /* */
+ /* <Since> */
+ /* 2.3.5 */
+ /* */
+ FT_EXPORT( FT_Bool )
+ FT_Face_CheckTrueTypePatents( FT_Face face );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Face_SetUnpatentedHinting */
+ /* */
+ /* <Description> */
+ /* Enable or disable the unpatented hinter for a given face. */
+ /* Only enable it if you have determined that the face doesn't */
+ /* use any patented opcodes (see @FT_Face_CheckTrueTypePatents). */
+ /* */
+ /* <Input> */
+ /* face :: A face handle. */
+ /* */
+ /* value :: New boolean setting. */
+ /* */
+ /* <Return> */
+ /* The old setting value. This will always be false if this is not */
+ /* an SFNT font, or if the unpatented hinter is not compiled in this */
+ /* instance of the library. */
+ /* */
+ /* <Note> */
+ /* Since May 2010, TrueType hinting is no longer patented. */
+ /* */
+ /* <Since> */
+ /* 2.3.5 */
+ /* */
+ FT_EXPORT( FT_Bool )
+ FT_Face_SetUnpatentedHinting( FT_Face face,
+ FT_Bool value );
+
+ /* */
+
+
+FT_END_HEADER
+
+#endif /* __FREETYPE_H__ */
+
+
+/* END */
diff --git a/freetype/include/freetype/ftadvanc.h b/freetype/include/freetype/ftadvanc.h
new file mode 100644
index 0000000..b4d2aed
--- /dev/null
+++ b/freetype/include/freetype/ftadvanc.h
@@ -0,0 +1,187 @@
+/***************************************************************************/
+/* */
+/* ftadvanc.h */
+/* */
+/* Quick computation of advance widths (specification only). */
+/* */
+/* Copyright 2008-2015 by */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+
+#ifndef __FTADVANC_H__
+#define __FTADVANC_H__
+
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+ /**************************************************************************
+ *
+ * @section:
+ * quick_advance
+ *
+ * @title:
+ * Quick retrieval of advance values
+ *
+ * @abstract:
+ * Retrieve horizontal and vertical advance values without processing
+ * glyph outlines, if possible.
+ *
+ * @description:
+ * This section contains functions to quickly extract advance values
+ * without handling glyph outlines, if possible.
+ *
+ * @order:
+ * FT_Get_Advance
+ * FT_Get_Advances
+ *
+ */
+
+
+ /*************************************************************************/
+ /* */
+ /* <Const> */
+ /* FT_ADVANCE_FLAG_FAST_ONLY */
+ /* */
+ /* <Description> */
+ /* A bit-flag to be OR-ed with the `flags' parameter of the */
+ /* @FT_Get_Advance and @FT_Get_Advances functions. */
+ /* */
+ /* If set, it indicates that you want these functions to fail if the */
+ /* corresponding hinting mode or font driver doesn't allow for very */
+ /* quick advance computation. */
+ /* */
+ /* Typically, glyphs that are either unscaled, unhinted, bitmapped, */
+ /* or light-hinted can have their advance width computed very */
+ /* quickly. */
+ /* */
+ /* Normal and bytecode hinted modes that require loading, scaling, */
+ /* and hinting of the glyph outline, are extremely slow by */
+ /* comparison. */
+ /* */
+#define FT_ADVANCE_FLAG_FAST_ONLY 0x20000000L
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Get_Advance */
+ /* */
+ /* <Description> */
+ /* Retrieve the advance value of a given glyph outline in an */
+ /* @FT_Face. */
+ /* */
+ /* <Input> */
+ /* face :: The source @FT_Face handle. */
+ /* */
+ /* gindex :: The glyph index. */
+ /* */
+ /* load_flags :: A set of bit flags similar to those used when */
+ /* calling @FT_Load_Glyph, used to determine what kind */
+ /* of advances you need. */
+ /* <Output> */
+ /* padvance :: The advance value. If scaling is performed (based on */
+ /* the value of `load_flags'), the advance value is in */
+ /* 16.16 format. Otherwise, it is in font units. */
+ /* */
+ /* If @FT_LOAD_VERTICAL_LAYOUT is set, this is the */
+ /* vertical advance corresponding to a vertical layout. */
+ /* Otherwise, it is the horizontal advance in a */
+ /* horizontal layout. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0 means success. */
+ /* */
+ /* <Note> */
+ /* This function may fail if you use @FT_ADVANCE_FLAG_FAST_ONLY and */
+ /* if the corresponding font backend doesn't have a quick way to */
+ /* retrieve the advances. */
+ /* */
+ /* A scaled advance is returned in 16.16 format but isn't transformed */
+ /* by the affine transformation specified by @FT_Set_Transform. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Get_Advance( FT_Face face,
+ FT_UInt gindex,
+ FT_Int32 load_flags,
+ FT_Fixed *padvance );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Get_Advances */
+ /* */
+ /* <Description> */
+ /* Retrieve the advance values of several glyph outlines in an */
+ /* @FT_Face. */
+ /* */
+ /* <Input> */
+ /* face :: The source @FT_Face handle. */
+ /* */
+ /* start :: The first glyph index. */
+ /* */
+ /* count :: The number of advance values you want to retrieve. */
+ /* */
+ /* load_flags :: A set of bit flags similar to those used when */
+ /* calling @FT_Load_Glyph. */
+ /* */
+ /* <Output> */
+ /* padvance :: The advance values. This array, to be provided by the */
+ /* caller, must contain at least `count' elements. */
+ /* */
+ /* If scaling is performed (based on the value of */
+ /* `load_flags'), the advance values are in 16.16 format. */
+ /* Otherwise, they are in font units. */
+ /* */
+ /* If @FT_LOAD_VERTICAL_LAYOUT is set, these are the */
+ /* vertical advances corresponding to a vertical layout. */
+ /* Otherwise, they are the horizontal advances in a */
+ /* horizontal layout. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0 means success. */
+ /* */
+ /* <Note> */
+ /* This function may fail if you use @FT_ADVANCE_FLAG_FAST_ONLY and */
+ /* if the corresponding font backend doesn't have a quick way to */
+ /* retrieve the advances. */
+ /* */
+ /* Scaled advances are returned in 16.16 format but aren't */
+ /* transformed by the affine transformation specified by */
+ /* @FT_Set_Transform. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Get_Advances( FT_Face face,
+ FT_UInt start,
+ FT_UInt count,
+ FT_Int32 load_flags,
+ FT_Fixed *padvances );
+
+ /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTADVANC_H__ */
+
+
+/* END */
diff --git a/freetype/include/freetype/ftautoh.h b/freetype/include/freetype/ftautoh.h
new file mode 100644
index 0000000..d0f6445
--- /dev/null
+++ b/freetype/include/freetype/ftautoh.h
@@ -0,0 +1,503 @@
+/***************************************************************************/
+/* */
+/* ftautoh.h */
+/* */
+/* FreeType API for controlling the auto-hinter (specification only). */
+/* */
+/* Copyright 2012-2015 by */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+
+#ifndef __FTAUTOH_H__
+#define __FTAUTOH_H__
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+ /**************************************************************************
+ *
+ * @section:
+ * auto_hinter
+ *
+ * @title:
+ * The auto-hinter
+ *
+ * @abstract:
+ * Controlling the auto-hinting module.
+ *
+ * @description:
+ * While FreeType's auto-hinter doesn't expose API functions by itself,
+ * it is possible to control its behaviour with @FT_Property_Set and
+ * @FT_Property_Get. The following lists the available properties
+ * together with the necessary macros and structures.
+ *
+ * Note that the auto-hinter's module name is `autofitter' for
+ * historical reasons.
+ *
+ */
+
+
+ /**************************************************************************
+ *
+ * @property:
+ * glyph-to-script-map
+ *
+ * @description:
+ * *Experimental* *only*
+ *
+ * The auto-hinter provides various script modules to hint glyphs.
+ * Examples of supported scripts are Latin or CJK. Before a glyph is
+ * auto-hinted, the Unicode character map of the font gets examined, and
+ * the script is then determined based on Unicode character ranges, see
+ * below.
+ *
+ * OpenType fonts, however, often provide much more glyphs than
+ * character codes (small caps, superscripts, ligatures, swashes, etc.),
+ * to be controlled by so-called `features'. Handling OpenType features
+ * can be quite complicated and thus needs a separate library on top of
+ * FreeType.
+ *
+ * The mapping between glyph indices and scripts (in the auto-hinter
+ * sense, see the @FT_AUTOHINTER_SCRIPT_XXX values) is stored as an
+ * array with `num_glyphs' elements, as found in the font's @FT_Face
+ * structure. The `glyph-to-script-map' property returns a pointer to
+ * this array, which can be modified as needed. Note that the
+ * modification should happen before the first glyph gets processed by
+ * the auto-hinter so that the global analysis of the font shapes
+ * actually uses the modified mapping.
+ *
+ * The following example code demonstrates how to access it (omitting
+ * the error handling).
+ *
+ * {
+ * FT_Library library;
+ * FT_Face face;
+ * FT_Prop_GlyphToScriptMap prop;
+ *
+ *
+ * FT_Init_FreeType( &library );
+ * FT_New_Face( library, "foo.ttf", 0, &face );
+ *
+ * prop.face = face;
+ *
+ * FT_Property_Get( library, "autofitter",
+ * "glyph-to-script-map", &prop );
+ *
+ * // adjust `prop.map' as needed right here
+ *
+ * FT_Load_Glyph( face, ..., FT_LOAD_FORCE_AUTOHINT );
+ * }
+ *
+ */
+
+
+ /**************************************************************************
+ *
+ * @enum:
+ * FT_AUTOHINTER_SCRIPT_XXX
+ *
+ * @description:
+ * *Experimental* *only*
+ *
+ * A list of constants used for the @glyph-to-script-map property to
+ * specify the script submodule the auto-hinter should use for hinting a
+ * particular glyph.
+ *
+ * @values:
+ * FT_AUTOHINTER_SCRIPT_NONE ::
+ * Don't auto-hint this glyph.
+ *
+ * FT_AUTOHINTER_SCRIPT_LATIN ::
+ * Apply the latin auto-hinter. For the auto-hinter, `latin' is a
+ * very broad term, including Cyrillic and Greek also since characters
+ * from those scripts share the same design constraints.
+ *
+ * By default, characters from the following Unicode ranges are
+ * assigned to this submodule.
+ *
+ * {
+ * U+0020 - U+007F // Basic Latin (no control characters)
+ * U+00A0 - U+00FF // Latin-1 Supplement (no control characters)
+ * U+0100 - U+017F // Latin Extended-A
+ * U+0180 - U+024F // Latin Extended-B
+ * U+0250 - U+02AF // IPA Extensions
+ * U+02B0 - U+02FF // Spacing Modifier Letters
+ * U+0300 - U+036F // Combining Diacritical Marks
+ * U+0370 - U+03FF // Greek and Coptic
+ * U+0400 - U+04FF // Cyrillic
+ * U+0500 - U+052F // Cyrillic Supplement
+ * U+1D00 - U+1D7F // Phonetic Extensions
+ * U+1D80 - U+1DBF // Phonetic Extensions Supplement
+ * U+1DC0 - U+1DFF // Combining Diacritical Marks Supplement
+ * U+1E00 - U+1EFF // Latin Extended Additional
+ * U+1F00 - U+1FFF // Greek Extended
+ * U+2000 - U+206F // General Punctuation
+ * U+2070 - U+209F // Superscripts and Subscripts
+ * U+20A0 - U+20CF // Currency Symbols
+ * U+2150 - U+218F // Number Forms
+ * U+2460 - U+24FF // Enclosed Alphanumerics
+ * U+2C60 - U+2C7F // Latin Extended-C
+ * U+2DE0 - U+2DFF // Cyrillic Extended-A
+ * U+2E00 - U+2E7F // Supplemental Punctuation
+ * U+A640 - U+A69F // Cyrillic Extended-B
+ * U+A720 - U+A7FF // Latin Extended-D
+ * U+FB00 - U+FB06 // Alphab. Present. Forms (Latin Ligatures)
+ * U+1D400 - U+1D7FF // Mathematical Alphanumeric Symbols
+ * U+1F100 - U+1F1FF // Enclosed Alphanumeric Supplement
+ * }
+ *
+ * FT_AUTOHINTER_SCRIPT_CJK ::
+ * Apply the CJK auto-hinter, covering Chinese, Japanese, Korean, old
+ * Vietnamese, and some other scripts.
+ *
+ * By default, characters from the following Unicode ranges are
+ * assigned to this submodule.
+ *
+ * {
+ * U+1100 - U+11FF // Hangul Jamo
+ * U+2E80 - U+2EFF // CJK Radicals Supplement
+ * U+2F00 - U+2FDF // Kangxi Radicals
+ * U+2FF0 - U+2FFF // Ideographic Description Characters
+ * U+3000 - U+303F // CJK Symbols and Punctuation
+ * U+3040 - U+309F // Hiragana
+ * U+30A0 - U+30FF // Katakana
+ * U+3100 - U+312F // Bopomofo
+ * U+3130 - U+318F // Hangul Compatibility Jamo
+ * U+3190 - U+319F // Kanbun
+ * U+31A0 - U+31BF // Bopomofo Extended
+ * U+31C0 - U+31EF // CJK Strokes
+ * U+31F0 - U+31FF // Katakana Phonetic Extensions
+ * U+3200 - U+32FF // Enclosed CJK Letters and Months
+ * U+3300 - U+33FF // CJK Compatibility
+ * U+3400 - U+4DBF // CJK Unified Ideographs Extension A
+ * U+4DC0 - U+4DFF // Yijing Hexagram Symbols
+ * U+4E00 - U+9FFF // CJK Unified Ideographs
+ * U+A960 - U+A97F // Hangul Jamo Extended-A
+ * U+AC00 - U+D7AF // Hangul Syllables
+ * U+D7B0 - U+D7FF // Hangul Jamo Extended-B
+ * U+F900 - U+FAFF // CJK Compatibility Ideographs
+ * U+FE10 - U+FE1F // Vertical forms
+ * U+FE30 - U+FE4F // CJK Compatibility Forms
+ * U+FF00 - U+FFEF // Halfwidth and Fullwidth Forms
+ * U+1B000 - U+1B0FF // Kana Supplement
+ * U+1D300 - U+1D35F // Tai Xuan Hing Symbols
+ * U+1F200 - U+1F2FF // Enclosed Ideographic Supplement
+ * U+20000 - U+2A6DF // CJK Unified Ideographs Extension B
+ * U+2A700 - U+2B73F // CJK Unified Ideographs Extension C
+ * U+2B740 - U+2B81F // CJK Unified Ideographs Extension D
+ * U+2F800 - U+2FA1F // CJK Compatibility Ideographs Supplement
+ * }
+ *
+ * FT_AUTOHINTER_SCRIPT_INDIC ::
+ * Apply the indic auto-hinter, covering all major scripts from the
+ * Indian sub-continent and some other related scripts like Thai, Lao,
+ * or Tibetan.
+ *
+ * By default, characters from the following Unicode ranges are
+ * assigned to this submodule.
+ *
+ * {
+ * U+0900 - U+0DFF // Indic Range
+ * U+0F00 - U+0FFF // Tibetan
+ * U+1900 - U+194F // Limbu
+ * U+1B80 - U+1BBF // Sundanese
+ * U+1C80 - U+1CDF // Meetei Mayak
+ * U+A800 - U+A82F // Syloti Nagri
+ * U+11800 - U+118DF // Sharada
+ * }
+ *
+ * Note that currently Indic support is rudimentary only, missing blue
+ * zone support.
+ *
+ */
+#define FT_AUTOHINTER_SCRIPT_NONE 0
+#define FT_AUTOHINTER_SCRIPT_LATIN 1
+#define FT_AUTOHINTER_SCRIPT_CJK 2
+#define FT_AUTOHINTER_SCRIPT_INDIC 3
+
+
+ /**************************************************************************
+ *
+ * @struct:
+ * FT_Prop_GlyphToScriptMap
+ *
+ * @description:
+ * *Experimental* *only*
+ *
+ * The data exchange structure for the @glyph-to-script-map property.
+ *
+ */
+ typedef struct FT_Prop_GlyphToScriptMap_
+ {
+ FT_Face face;
+ FT_UShort* map;
+
+ } FT_Prop_GlyphToScriptMap;
+
+
+ /**************************************************************************
+ *
+ * @property:
+ * fallback-script
+ *
+ * @description:
+ * *Experimental* *only*
+ *
+ * If no auto-hinter script module can be assigned to a glyph, a
+ * fallback script gets assigned to it (see also the
+ * @glyph-to-script-map property). By default, this is
+ * @FT_AUTOHINTER_SCRIPT_CJK. Using the `fallback-script' property,
+ * this fallback value can be changed.
+ *
+ * {
+ * FT_Library library;
+ * FT_UInt fallback_script = FT_AUTOHINTER_SCRIPT_NONE;
+ *
+ *
+ * FT_Init_FreeType( &library );
+ *
+ * FT_Property_Set( library, "autofitter",
+ * "fallback-script", &fallback_script );
+ * }
+ *
+ * @note:
+ * This property can be used with @FT_Property_Get also.
+ *
+ * It's important to use the right timing for changing this value: The
+ * creation of the glyph-to-script map that eventually uses the
+ * fallback script value gets triggered either by setting or reading a
+ * face-specific property like @glyph-to-script-map, or by auto-hinting
+ * any glyph from that face. In particular, if you have already created
+ * an @FT_Face structure but not loaded any glyph (using the
+ * auto-hinter), a change of the fallback script will affect this face.
+ *
+ */
+
+
+ /**************************************************************************
+ *
+ * @property:
+ * default-script
+ *
+ * @description:
+ * *Experimental* *only*
+ *
+ * If FreeType gets compiled with FT_CONFIG_OPTION_USE_HARFBUZZ to make
+ * the HarfBuzz library access OpenType features for getting better
+ * glyph coverages, this property sets the (auto-fitter) script to be
+ * used for the default (OpenType) script data of a font's GSUB table.
+ * Features for the default script are intended for all scripts not
+ * explicitly handled in GSUB; an example is a `dlig' feature,
+ * containing the combination of the characters `T', `E', and `L' to
+ * form a `TEL' ligature.
+ *
+ * By default, this is @FT_AUTOHINTER_SCRIPT_LATIN. Using the
+ * `default-script' property, this default value can be changed.
+ *
+ * {
+ * FT_Library library;
+ * FT_UInt default_script = FT_AUTOHINTER_SCRIPT_NONE;
+ *
+ *
+ * FT_Init_FreeType( &library );
+ *
+ * FT_Property_Set( library, "autofitter",
+ * "default-script", &default_script );
+ * }
+ *
+ * @note:
+ * This property can be used with @FT_Property_Get also.
+ *
+ * It's important to use the right timing for changing this value: The
+ * creation of the glyph-to-script map that eventually uses the
+ * default script value gets triggered either by setting or reading a
+ * face-specific property like @glyph-to-script-map, or by auto-hinting
+ * any glyph from that face. In particular, if you have already created
+ * an @FT_Face structure but not loaded any glyph (using the
+ * auto-hinter), a change of the default script will affect this face.
+ *
+ */
+
+
+ /**************************************************************************
+ *
+ * @property:
+ * increase-x-height
+ *
+ * @description:
+ * For ppem values in the range 6~<= ppem <= `increase-x-height', round
+ * up the font's x~height much more often than normally. If the value
+ * is set to~0, which is the default, this feature is switched off. Use
+ * this property to improve the legibility of small font sizes if
+ * necessary.
+ *
+ * {
+ * FT_Library library;
+ * FT_Face face;
+ * FT_Prop_IncreaseXHeight prop;
+ *
+ *
+ * FT_Init_FreeType( &library );
+ * FT_New_Face( library, "foo.ttf", 0, &face );
+ * FT_Set_Char_Size( face, 10 * 64, 0, 72, 0 );
+ *
+ * prop.face = face;
+ * prop.limit = 14;
+ *
+ * FT_Property_Set( library, "autofitter",
+ * "increase-x-height", &prop );
+ * }
+ *
+ * @note:
+ * This property can be used with @FT_Property_Get also.
+ *
+ * Set this value right after calling @FT_Set_Char_Size, but before
+ * loading any glyph (using the auto-hinter).
+ *
+ */
+
+
+ /**************************************************************************
+ *
+ * @struct:
+ * FT_Prop_IncreaseXHeight
+ *
+ * @description:
+ * The data exchange structure for the @increase-x-height property.
+ *
+ */
+ typedef struct FT_Prop_IncreaseXHeight_
+ {
+ FT_Face face;
+ FT_UInt limit;
+
+ } FT_Prop_IncreaseXHeight;
+
+
+ /**************************************************************************
+ *
+ * @property:
+ * warping
+ *
+ * @description:
+ * *Experimental* *only*
+ *
+ * If FreeType gets compiled with option AF_CONFIG_OPTION_USE_WARPER to
+ * activate the warp hinting code in the auto-hinter, this property
+ * switches warping on and off.
+ *
+ * Warping only works in `light' auto-hinting mode. The idea of the
+ * code is to slightly scale and shift a glyph along the non-hinted
+ * dimension (which is usually the horizontal axis) so that as much of
+ * its segments are aligned (more or less) to the grid. To find out a
+ * glyph's optimal scaling and shifting value, various parameter
+ * combinations are tried and scored.
+ *
+ * By default, warping is off. The example below shows how to switch on
+ * warping (omitting the error handling).
+ *
+ * {
+ * FT_Library library;
+ * FT_Bool warping = 1;
+ *
+ *
+ * FT_Init_FreeType( &library );
+ *
+ * FT_Property_Set( library, "autofitter",
+ * "warping", &warping );
+ * }
+ *
+ * @note:
+ * This property can be used with @FT_Property_Get also.
+ *
+ * The warping code can also change advance widths. Have a look at the
+ * `lsb_delta' and `rsb_delta' fields in the @FT_GlyphSlotRec structure
+ * for details on improving inter-glyph distances while rendering.
+ *
+ * Since warping is a global property of the auto-hinter it is best to
+ * change its value before rendering any face. Otherwise, you should
+ * reload all faces that get auto-hinted in `light' hinting mode.
+ *
+ */
+
+
+ /**************************************************************************
+ *
+ * @property:
+ * no-stem-darkening[autofit]
+ *
+ * @description:
+ * *Experimental* *only,* *requires* *linear* *alpha* *blending* *and*
+ * *gamma* *correction*
+ *
+ * Stem darkening emboldens glyphs at smaller sizes to make them more
+ * readable on common low-DPI screens when using linear alpha blending
+ * and gamma correction, see @FT_Render_Glyph. When not using linear
+ * alpha blending and gamma correction, glyphs will appear heavy and
+ * fuzzy!
+ *
+ * Gamma correction essentially lightens fonts since shades of grey are
+ * shifted to higher pixel values (=~higher brightness) to match the
+ * original intention to the reality of our screens. The side-effect is
+ * that glyphs `thin out'. Mac OS~X and Adobe's proprietary font
+ * rendering library implement a counter-measure: stem darkening at
+ * smaller sizes where shades of gray dominate. By emboldening a glyph
+ * slightly in relation to its pixel size, individual pixels get higher
+ * coverage of filled-in outlines and are therefore `blacker'. This
+ * counteracts the `thinning out' of glyphs, making text remain readable
+ * at smaller sizes. All glyphs that pass through the auto-hinter will
+ * be emboldened unless this property is set to TRUE.
+ *
+ * See the description of the CFF driver for algorithmic details. Total
+ * consistency with the CFF driver is currently not achieved because the
+ * emboldening method differs and glyphs must be scaled down on the
+ * Y-axis to keep outline points inside their precomputed blue zones.
+ * The smaller the size (especially 9ppem and down), the higher the loss
+ * of emboldening versus the CFF driver.
+ *
+ */
+
+
+ /**************************************************************************
+ *
+ * @property:
+ * darkening-parameters[autofit]
+ *
+ * @description:
+ * *Experimental* *only*
+ *
+ * See the description of the CFF driver for details. This
+ * implementation appropriates the
+ * CFF_CONFIG_OPTION_DARKENING_PARAMETER_* #defines for consistency.
+ * Note the differences described in @no-stem-darkening[autofit].
+ *
+ */
+
+
+ /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTAUTOH_H__ */
+
+
+/* END */
diff --git a/freetype/include/freetype/ftbbox.h b/freetype/include/freetype/ftbbox.h
new file mode 100644
index 0000000..9d9d040
--- /dev/null
+++ b/freetype/include/freetype/ftbbox.h
@@ -0,0 +1,101 @@
+/***************************************************************************/
+/* */
+/* ftbbox.h */
+/* */
+/* FreeType exact bbox computation (specification). */
+/* */
+/* Copyright 1996-2015 by */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* This component has a _single_ role: to compute exact outline bounding */
+ /* boxes. */
+ /* */
+ /* It is separated from the rest of the engine for various technical */
+ /* reasons. It may well be integrated in `ftoutln' later. */
+ /* */
+ /*************************************************************************/
+
+
+#ifndef __FTBBOX_H__
+#define __FTBBOX_H__
+
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* outline_processing */
+ /* */
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Outline_Get_BBox */
+ /* */
+ /* <Description> */
+ /* Compute the exact bounding box of an outline. This is slower */
+ /* than computing the control box. However, it uses an advanced */
+ /* algorithm that returns _very_ quickly when the two boxes */
+ /* coincide. Otherwise, the outline Bézier arcs are traversed to */
+ /* extract their extrema. */
+ /* */
+ /* <Input> */
+ /* outline :: A pointer to the source outline. */
+ /* */
+ /* <Output> */
+ /* abbox :: The outline's exact bounding box. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* If the font is tricky and the glyph has been loaded with */
+ /* @FT_LOAD_NO_SCALE, the resulting BBox is meaningless. To get */
+ /* reasonable values for the BBox it is necessary to load the glyph */
+ /* at a large ppem value (so that the hinting instructions can */
+ /* properly shift and scale the subglyphs), then extracting the BBox, */
+ /* which can be eventually converted back to font units. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Outline_Get_BBox( FT_Outline* outline,
+ FT_BBox *abbox );
+
+ /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTBBOX_H__ */
+
+
+/* END */
+
+
+/* Local Variables: */
+/* coding: utf-8 */
+/* End: */
diff --git a/freetype/include/freetype/ftbdf.h b/freetype/include/freetype/ftbdf.h
new file mode 100644
index 0000000..0bdabf4
--- /dev/null
+++ b/freetype/include/freetype/ftbdf.h
@@ -0,0 +1,210 @@
+/***************************************************************************/
+/* */
+/* ftbdf.h */
+/* */
+/* FreeType API for accessing BDF-specific strings (specification). */
+/* */
+/* Copyright 2002-2015 by */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+
+#ifndef __FTBDF_H__
+#define __FTBDF_H__
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* bdf_fonts */
+ /* */
+ /* <Title> */
+ /* BDF and PCF Files */
+ /* */
+ /* <Abstract> */
+ /* BDF and PCF specific API. */
+ /* */
+ /* <Description> */
+ /* This section contains the declaration of functions specific to BDF */
+ /* and PCF fonts. */
+ /* */
+ /*************************************************************************/
+
+
+ /**********************************************************************
+ *
+ * @enum:
+ * BDF_PropertyType
+ *
+ * @description:
+ * A list of BDF property types.
+ *
+ * @values:
+ * BDF_PROPERTY_TYPE_NONE ::
+ * Value~0 is used to indicate a missing property.
+ *
+ * BDF_PROPERTY_TYPE_ATOM ::
+ * Property is a string atom.
+ *
+ * BDF_PROPERTY_TYPE_INTEGER ::
+ * Property is a 32-bit signed integer.
+ *
+ * BDF_PROPERTY_TYPE_CARDINAL ::
+ * Property is a 32-bit unsigned integer.
+ */
+ typedef enum BDF_PropertyType_
+ {
+ BDF_PROPERTY_TYPE_NONE = 0,
+ BDF_PROPERTY_TYPE_ATOM = 1,
+ BDF_PROPERTY_TYPE_INTEGER = 2,
+ BDF_PROPERTY_TYPE_CARDINAL = 3
+
+ } BDF_PropertyType;
+
+
+ /**********************************************************************
+ *
+ * @type:
+ * BDF_Property
+ *
+ * @description:
+ * A handle to a @BDF_PropertyRec structure to model a given
+ * BDF/PCF property.
+ */
+ typedef struct BDF_PropertyRec_* BDF_Property;
+
+
+ /**********************************************************************
+ *
+ * @struct:
+ * BDF_PropertyRec
+ *
+ * @description:
+ * This structure models a given BDF/PCF property.
+ *
+ * @fields:
+ * type ::
+ * The property type.
+ *
+ * u.atom ::
+ * The atom string, if type is @BDF_PROPERTY_TYPE_ATOM. May be
+ * NULL, indicating an empty string.
+ *
+ * u.integer ::
+ * A signed integer, if type is @BDF_PROPERTY_TYPE_INTEGER.
+ *
+ * u.cardinal ::
+ * An unsigned integer, if type is @BDF_PROPERTY_TYPE_CARDINAL.
+ */
+ typedef struct BDF_PropertyRec_
+ {
+ BDF_PropertyType type;
+ union {
+ const char* atom;
+ FT_Int32 integer;
+ FT_UInt32 cardinal;
+
+ } u;
+
+ } BDF_PropertyRec;
+
+
+ /**********************************************************************
+ *
+ * @function:
+ * FT_Get_BDF_Charset_ID
+ *
+ * @description:
+ * Retrieve a BDF font character set identity, according to
+ * the BDF specification.
+ *
+ * @input:
+ * face ::
+ * A handle to the input face.
+ *
+ * @output:
+ * acharset_encoding ::
+ * Charset encoding, as a C~string, owned by the face.
+ *
+ * acharset_registry ::
+ * Charset registry, as a C~string, owned by the face.
+ *
+ * @return:
+ * FreeType error code. 0~means success.
+ *
+ * @note:
+ * This function only works with BDF faces, returning an error otherwise.
+ */
+ FT_EXPORT( FT_Error )
+ FT_Get_BDF_Charset_ID( FT_Face face,
+ const char* *acharset_encoding,
+ const char* *acharset_registry );
+
+
+ /**********************************************************************
+ *
+ * @function:
+ * FT_Get_BDF_Property
+ *
+ * @description:
+ * Retrieve a BDF property from a BDF or PCF font file.
+ *
+ * @input:
+ * face :: A handle to the input face.
+ *
+ * name :: The property name.
+ *
+ * @output:
+ * aproperty :: The property.
+ *
+ * @return:
+ * FreeType error code. 0~means success.
+ *
+ * @note:
+ * This function works with BDF _and_ PCF fonts. It returns an error
+ * otherwise. It also returns an error if the property is not in the
+ * font.
+ *
+ * A `property' is a either key-value pair within the STARTPROPERTIES
+ * ... ENDPROPERTIES block of a BDF font or a key-value pair from the
+ * `info->props' array within a `FontRec' structure of a PCF font.
+ *
+ * Integer properties are always stored as `signed' within PCF fonts;
+ * consequently, @BDF_PROPERTY_TYPE_CARDINAL is a possible return value
+ * for BDF fonts only.
+ *
+ * In case of error, `aproperty->type' is always set to
+ * @BDF_PROPERTY_TYPE_NONE.
+ */
+ FT_EXPORT( FT_Error )
+ FT_Get_BDF_Property( FT_Face face,
+ const char* prop_name,
+ BDF_PropertyRec *aproperty );
+
+ /* */
+
+FT_END_HEADER
+
+#endif /* __FTBDF_H__ */
+
+
+/* END */
diff --git a/freetype/include/freetype/ftbitmap.h b/freetype/include/freetype/ftbitmap.h
new file mode 100644
index 0000000..46cc47b
--- /dev/null
+++ b/freetype/include/freetype/ftbitmap.h
@@ -0,0 +1,240 @@
+/***************************************************************************/
+/* */
+/* ftbitmap.h */
+/* */
+/* FreeType utility functions for bitmaps (specification). */
+/* */
+/* Copyright 2004-2015 by */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+
+#ifndef __FTBITMAP_H__
+#define __FTBITMAP_H__
+
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* bitmap_handling */
+ /* */
+ /* <Title> */
+ /* Bitmap Handling */
+ /* */
+ /* <Abstract> */
+ /* Handling FT_Bitmap objects. */
+ /* */
+ /* <Description> */
+ /* This section contains functions for handling @FT_Bitmap objects. */
+ /* Note that none of the functions changes the bitmap's `flow' (as */
+ /* indicated by the sign of the `pitch' field in `FT_Bitmap'). */
+ /* */
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Bitmap_Init */
+ /* */
+ /* <Description> */
+ /* Initialize a pointer to an @FT_Bitmap structure. */
+ /* */
+ /* <InOut> */
+ /* abitmap :: A pointer to the bitmap structure. */
+ /* */
+ /* <Note> */
+ /* A deprecated name for the same function is `FT_Bitmap_New'. */
+ /* */
+ FT_EXPORT( void )
+ FT_Bitmap_Init( FT_Bitmap *abitmap );
+
+
+ /* deprecated */
+ FT_EXPORT( void )
+ FT_Bitmap_New( FT_Bitmap *abitmap );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Bitmap_Copy */
+ /* */
+ /* <Description> */
+ /* Copy a bitmap into another one. */
+ /* */
+ /* <Input> */
+ /* library :: A handle to a library object. */
+ /* */
+ /* source :: A handle to the source bitmap. */
+ /* */
+ /* <Output> */
+ /* target :: A handle to the target bitmap. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Bitmap_Copy( FT_Library library,
+ const FT_Bitmap *source,
+ FT_Bitmap *target);
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Bitmap_Embolden */
+ /* */
+ /* <Description> */
+ /* Embolden a bitmap. The new bitmap will be about `xStrength' */
+ /* pixels wider and `yStrength' pixels higher. The left and bottom */
+ /* borders are kept unchanged. */
+ /* */
+ /* <Input> */
+ /* library :: A handle to a library object. */
+ /* */
+ /* xStrength :: How strong the glyph is emboldened horizontally. */
+ /* Expressed in 26.6 pixel format. */
+ /* */
+ /* yStrength :: How strong the glyph is emboldened vertically. */
+ /* Expressed in 26.6 pixel format. */
+ /* */
+ /* <InOut> */
+ /* bitmap :: A handle to the target bitmap. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* The current implementation restricts `xStrength' to be less than */
+ /* or equal to~8 if bitmap is of pixel_mode @FT_PIXEL_MODE_MONO. */
+ /* */
+ /* If you want to embolden the bitmap owned by a @FT_GlyphSlotRec, */
+ /* you should call @FT_GlyphSlot_Own_Bitmap on the slot first. */
+ /* */
+ /* Bitmaps in @FT_PIXEL_MODE_GRAY2 and @FT_PIXEL_MODE_GRAY@ format */
+ /* are converted to @FT_PIXEL_MODE_GRAY format (i.e., 8bpp). */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Bitmap_Embolden( FT_Library library,
+ FT_Bitmap* bitmap,
+ FT_Pos xStrength,
+ FT_Pos yStrength );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Bitmap_Convert */
+ /* */
+ /* <Description> */
+ /* Convert a bitmap object with depth 1bpp, 2bpp, 4bpp, 8bpp or 32bpp */
+ /* to a bitmap object with depth 8bpp, making the number of used */
+ /* bytes line (a.k.a. the `pitch') a multiple of `alignment'. */
+ /* */
+ /* <Input> */
+ /* library :: A handle to a library object. */
+ /* */
+ /* source :: The source bitmap. */
+ /* */
+ /* alignment :: The pitch of the bitmap is a multiple of this */
+ /* parameter. Common values are 1, 2, or 4. */
+ /* */
+ /* <Output> */
+ /* target :: The target bitmap. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* It is possible to call @FT_Bitmap_Convert multiple times without */
+ /* calling @FT_Bitmap_Done (the memory is simply reallocated). */
+ /* */
+ /* Use @FT_Bitmap_Done to finally remove the bitmap object. */
+ /* */
+ /* The `library' argument is taken to have access to FreeType's */
+ /* memory handling functions. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Bitmap_Convert( FT_Library library,
+ const FT_Bitmap *source,
+ FT_Bitmap *target,
+ FT_Int alignment );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_GlyphSlot_Own_Bitmap */
+ /* */
+ /* <Description> */
+ /* Make sure that a glyph slot owns `slot->bitmap'. */
+ /* */
+ /* <Input> */
+ /* slot :: The glyph slot. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* This function is to be used in combination with */
+ /* @FT_Bitmap_Embolden. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_GlyphSlot_Own_Bitmap( FT_GlyphSlot slot );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Bitmap_Done */
+ /* */
+ /* <Description> */
+ /* Destroy a bitmap object initialized with @FT_Bitmap_Init. */
+ /* */
+ /* <Input> */
+ /* library :: A handle to a library object. */
+ /* */
+ /* bitmap :: The bitmap object to be freed. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* The `library' argument is taken to have access to FreeType's */
+ /* memory handling functions. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Bitmap_Done( FT_Library library,
+ FT_Bitmap *bitmap );
+
+
+ /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTBITMAP_H__ */
+
+
+/* END */
diff --git a/freetype/include/freetype/ftbzip2.h b/freetype/include/freetype/ftbzip2.h
new file mode 100644
index 0000000..c25f946
--- /dev/null
+++ b/freetype/include/freetype/ftbzip2.h
@@ -0,0 +1,102 @@
+/***************************************************************************/
+/* */
+/* ftbzip2.h */
+/* */
+/* Bzip2-compressed stream support. */
+/* */
+/* Copyright 2010-2015 by */
+/* Joel Klinghed. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+
+#ifndef __FTBZIP2_H__
+#define __FTBZIP2_H__
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* bzip2 */
+ /* */
+ /* <Title> */
+ /* BZIP2 Streams */
+ /* */
+ /* <Abstract> */
+ /* Using bzip2-compressed font files. */
+ /* */
+ /* <Description> */
+ /* This section contains the declaration of Bzip2-specific functions. */
+ /* */
+ /*************************************************************************/
+
+
+ /************************************************************************
+ *
+ * @function:
+ * FT_Stream_OpenBzip2
+ *
+ * @description:
+ * Open a new stream to parse bzip2-compressed font files. This is
+ * mainly used to support the compressed `*.pcf.bz2' fonts that come
+ * with XFree86.
+ *
+ * @input:
+ * stream ::
+ * The target embedding stream.
+ *
+ * source ::
+ * The source stream.
+ *
+ * @return:
+ * FreeType error code. 0~means success.
+ *
+ * @note:
+ * The source stream must be opened _before_ calling this function.
+ *
+ * Calling the internal function `FT_Stream_Close' on the new stream will
+ * *not* call `FT_Stream_Close' on the source stream. None of the stream
+ * objects will be released to the heap.
+ *
+ * The stream implementation is very basic and resets the decompression
+ * process each time seeking backwards is needed within the stream.
+ *
+ * In certain builds of the library, bzip2 compression recognition is
+ * automatically handled when calling @FT_New_Face or @FT_Open_Face.
+ * This means that if no font driver is capable of handling the raw
+ * compressed file, the library will try to open a bzip2 compressed stream
+ * from it and re-open the face with it.
+ *
+ * This function may return `FT_Err_Unimplemented_Feature' if your build
+ * of FreeType was not compiled with bzip2 support.
+ */
+ FT_EXPORT( FT_Error )
+ FT_Stream_OpenBzip2( FT_Stream stream,
+ FT_Stream source );
+
+ /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTBZIP2_H__ */
+
+
+/* END */
diff --git a/freetype/include/freetype/ftcache.h b/freetype/include/freetype/ftcache.h
new file mode 100644
index 0000000..68525bb
--- /dev/null
+++ b/freetype/include/freetype/ftcache.h
@@ -0,0 +1,1057 @@
+/***************************************************************************/
+/* */
+/* ftcache.h */
+/* */
+/* FreeType Cache subsystem (specification). */
+/* */
+/* Copyright 1996-2015 by */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+
+#ifndef __FTCACHE_H__
+#define __FTCACHE_H__
+
+
+#include <ft2build.h>
+#include FT_GLYPH_H
+
+
+FT_BEGIN_HEADER
+
+
+ /*************************************************************************
+ *
+ * <Section>
+ * cache_subsystem
+ *
+ * <Title>
+ * Cache Sub-System
+ *
+ * <Abstract>
+ * How to cache face, size, and glyph data with FreeType~2.
+ *
+ * <Description>
+ * This section describes the FreeType~2 cache sub-system, which is used
+ * to limit the number of concurrently opened @FT_Face and @FT_Size
+ * objects, as well as caching information like character maps and glyph
+ * images while limiting their maximum memory usage.
+ *
+ * Note that all types and functions begin with the `FTC_' prefix.
+ *
+ * The cache is highly portable and thus doesn't know anything about the
+ * fonts installed on your system, or how to access them. This implies
+ * the following scheme:
+ *
+ * First, available or installed font faces are uniquely identified by
+ * @FTC_FaceID values, provided to the cache by the client. Note that
+ * the cache only stores and compares these values, and doesn't try to
+ * interpret them in any way.
+ *
+ * Second, the cache calls, only when needed, a client-provided function
+ * to convert an @FTC_FaceID into a new @FT_Face object. The latter is
+ * then completely managed by the cache, including its termination
+ * through @FT_Done_Face. To monitor termination of face objects, the
+ * finalizer callback in the `generic' field of the @FT_Face object can
+ * be used, which might also be used to store the @FTC_FaceID of the
+ * face.
+ *
+ * Clients are free to map face IDs to anything else. The most simple
+ * usage is to associate them to a (pathname,face_index) pair that is
+ * used to call @FT_New_Face. However, more complex schemes are also
+ * possible.
+ *
+ * Note that for the cache to work correctly, the face ID values must be
+ * *persistent*, which means that the contents they point to should not
+ * change at runtime, or that their value should not become invalid.
+ *
+ * If this is unavoidable (e.g., when a font is uninstalled at runtime),
+ * you should call @FTC_Manager_RemoveFaceID as soon as possible, to let
+ * the cache get rid of any references to the old @FTC_FaceID it may
+ * keep internally. Failure to do so will lead to incorrect behaviour
+ * or even crashes.
+ *
+ * To use the cache, start with calling @FTC_Manager_New to create a new
+ * @FTC_Manager object, which models a single cache instance. You can
+ * then look up @FT_Face and @FT_Size objects with
+ * @FTC_Manager_LookupFace and @FTC_Manager_LookupSize, respectively.
+ *
+ * If you want to use the charmap caching, call @FTC_CMapCache_New, then
+ * later use @FTC_CMapCache_Lookup to perform the equivalent of
+ * @FT_Get_Char_Index, only much faster.
+ *
+ * If you want to use the @FT_Glyph caching, call @FTC_ImageCache, then
+ * later use @FTC_ImageCache_Lookup to retrieve the corresponding
+ * @FT_Glyph objects from the cache.
+ *
+ * If you need lots of small bitmaps, it is much more memory efficient
+ * to call @FTC_SBitCache_New followed by @FTC_SBitCache_Lookup. This
+ * returns @FTC_SBitRec structures, which are used to store small
+ * bitmaps directly. (A small bitmap is one whose metrics and
+ * dimensions all fit into 8-bit integers).
+ *
+ * We hope to also provide a kerning cache in the near future.
+ *
+ *
+ * <Order>
+ * FTC_Manager
+ * FTC_FaceID
+ * FTC_Face_Requester
+ *
+ * FTC_Manager_New
+ * FTC_Manager_Reset
+ * FTC_Manager_Done
+ * FTC_Manager_LookupFace
+ * FTC_Manager_LookupSize
+ * FTC_Manager_RemoveFaceID
+ *
+ * FTC_Node
+ * FTC_Node_Unref
+ *
+ * FTC_ImageCache
+ * FTC_ImageCache_New
+ * FTC_ImageCache_Lookup
+ *
+ * FTC_SBit
+ * FTC_SBitCache
+ * FTC_SBitCache_New
+ * FTC_SBitCache_Lookup
+ *
+ * FTC_CMapCache
+ * FTC_CMapCache_New
+ * FTC_CMapCache_Lookup
+ *
+ *************************************************************************/
+
+
+ /*************************************************************************/
+ /*************************************************************************/
+ /*************************************************************************/
+ /***** *****/
+ /***** BASIC TYPE DEFINITIONS *****/
+ /***** *****/
+ /*************************************************************************/
+ /*************************************************************************/
+ /*************************************************************************/
+
+
+ /*************************************************************************
+ *
+ * @type: FTC_FaceID
+ *
+ * @description:
+ * An opaque pointer type that is used to identity face objects. The
+ * contents of such objects is application-dependent.
+ *
+ * These pointers are typically used to point to a user-defined
+ * structure containing a font file path, and face index.
+ *
+ * @note:
+ * Never use NULL as a valid @FTC_FaceID.
+ *
+ * Face IDs are passed by the client to the cache manager that calls,
+ * when needed, the @FTC_Face_Requester to translate them into new
+ * @FT_Face objects.
+ *
+ * If the content of a given face ID changes at runtime, or if the value
+ * becomes invalid (e.g., when uninstalling a font), you should
+ * immediately call @FTC_Manager_RemoveFaceID before any other cache
+ * function.
+ *
+ * Failure to do so will result in incorrect behaviour or even
+ * memory leaks and crashes.
+ */
+ typedef FT_Pointer FTC_FaceID;
+
+
+ /************************************************************************
+ *
+ * @functype:
+ * FTC_Face_Requester
+ *
+ * @description:
+ * A callback function provided by client applications. It is used by
+ * the cache manager to translate a given @FTC_FaceID into a new valid
+ * @FT_Face object, on demand.
+ *
+ * <Input>
+ * face_id ::
+ * The face ID to resolve.
+ *
+ * library ::
+ * A handle to a FreeType library object.
+ *
+ * req_data ::
+ * Application-provided request data (see note below).
+ *
+ * <Output>
+ * aface ::
+ * A new @FT_Face handle.
+ *
+ * <Return>
+ * FreeType error code. 0~means success.
+ *
+ * <Note>
+ * The third parameter `req_data' is the same as the one passed by the
+ * client when @FTC_Manager_New is called.
+ *
+ * The face requester should not perform funny things on the returned
+ * face object, like creating a new @FT_Size for it, or setting a
+ * transformation through @FT_Set_Transform!
+ */
+ typedef FT_Error
+ (*FTC_Face_Requester)( FTC_FaceID face_id,
+ FT_Library library,
+ FT_Pointer req_data,
+ FT_Face* aface );
+
+ /* */
+
+
+ /*************************************************************************/
+ /*************************************************************************/
+ /*************************************************************************/
+ /***** *****/
+ /***** CACHE MANAGER OBJECT *****/
+ /***** *****/
+ /*************************************************************************/
+ /*************************************************************************/
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FTC_Manager */
+ /* */
+ /* <Description> */
+ /* This object corresponds to one instance of the cache-subsystem. */
+ /* It is used to cache one or more @FT_Face objects, along with */
+ /* corresponding @FT_Size objects. */
+ /* */
+ /* The manager intentionally limits the total number of opened */
+ /* @FT_Face and @FT_Size objects to control memory usage. See the */
+ /* `max_faces' and `max_sizes' parameters of @FTC_Manager_New. */
+ /* */
+ /* The manager is also used to cache `nodes' of various types while */
+ /* limiting their total memory usage. */
+ /* */
+ /* All limitations are enforced by keeping lists of managed objects */
+ /* in most-recently-used order, and flushing old nodes to make room */
+ /* for new ones. */
+ /* */
+ typedef struct FTC_ManagerRec_* FTC_Manager;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FTC_Node */
+ /* */
+ /* <Description> */
+ /* An opaque handle to a cache node object. Each cache node is */
+ /* reference-counted. A node with a count of~0 might be flushed */
+ /* out of a full cache whenever a lookup request is performed. */
+ /* */
+ /* If you look up nodes, you have the ability to `acquire' them, */
+ /* i.e., to increment their reference count. This will prevent the */
+ /* node from being flushed out of the cache until you explicitly */
+ /* `release' it (see @FTC_Node_Unref). */
+ /* */
+ /* See also @FTC_SBitCache_Lookup and @FTC_ImageCache_Lookup. */
+ /* */
+ typedef struct FTC_NodeRec_* FTC_Node;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FTC_Manager_New */
+ /* */
+ /* <Description> */
+ /* Create a new cache manager. */
+ /* */
+ /* <Input> */
+ /* library :: The parent FreeType library handle to use. */
+ /* */
+ /* max_faces :: Maximum number of opened @FT_Face objects managed by */
+ /* this cache instance. Use~0 for defaults. */
+ /* */
+ /* max_sizes :: Maximum number of opened @FT_Size objects managed by */
+ /* this cache instance. Use~0 for defaults. */
+ /* */
+ /* max_bytes :: Maximum number of bytes to use for cached data nodes. */
+ /* Use~0 for defaults. Note that this value does not */
+ /* account for managed @FT_Face and @FT_Size objects. */
+ /* */
+ /* requester :: An application-provided callback used to translate */
+ /* face IDs into real @FT_Face objects. */
+ /* */
+ /* req_data :: A generic pointer that is passed to the requester */
+ /* each time it is called (see @FTC_Face_Requester). */
+ /* */
+ /* <Output> */
+ /* amanager :: A handle to a new manager object. 0~in case of */
+ /* failure. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FTC_Manager_New( FT_Library library,
+ FT_UInt max_faces,
+ FT_UInt max_sizes,
+ FT_ULong max_bytes,
+ FTC_Face_Requester requester,
+ FT_Pointer req_data,
+ FTC_Manager *amanager );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FTC_Manager_Reset */
+ /* */
+ /* <Description> */
+ /* Empty a given cache manager. This simply gets rid of all the */
+ /* currently cached @FT_Face and @FT_Size objects within the manager. */
+ /* */
+ /* <InOut> */
+ /* manager :: A handle to the manager. */
+ /* */
+ FT_EXPORT( void )
+ FTC_Manager_Reset( FTC_Manager manager );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FTC_Manager_Done */
+ /* */
+ /* <Description> */
+ /* Destroy a given manager after emptying it. */
+ /* */
+ /* <Input> */
+ /* manager :: A handle to the target cache manager object. */
+ /* */
+ FT_EXPORT( void )
+ FTC_Manager_Done( FTC_Manager manager );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FTC_Manager_LookupFace */
+ /* */
+ /* <Description> */
+ /* Retrieve the @FT_Face object that corresponds to a given face ID */
+ /* through a cache manager. */
+ /* */
+ /* <Input> */
+ /* manager :: A handle to the cache manager. */
+ /* */
+ /* face_id :: The ID of the face object. */
+ /* */
+ /* <Output> */
+ /* aface :: A handle to the face object. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* The returned @FT_Face object is always owned by the manager. You */
+ /* should never try to discard it yourself. */
+ /* */
+ /* The @FT_Face object doesn't necessarily have a current size object */
+ /* (i.e., face->size can be~0). If you need a specific `font size', */
+ /* use @FTC_Manager_LookupSize instead. */
+ /* */
+ /* Never change the face's transformation matrix (i.e., never call */
+ /* the @FT_Set_Transform function) on a returned face! If you need */
+ /* to transform glyphs, do it yourself after glyph loading. */
+ /* */
+ /* When you perform a lookup, out-of-memory errors are detected */
+ /* _within_ the lookup and force incremental flushes of the cache */
+ /* until enough memory is released for the lookup to succeed. */
+ /* */
+ /* If a lookup fails with `FT_Err_Out_Of_Memory' the cache has */
+ /* already been completely flushed, and still no memory was available */
+ /* for the operation. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FTC_Manager_LookupFace( FTC_Manager manager,
+ FTC_FaceID face_id,
+ FT_Face *aface );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Struct> */
+ /* FTC_ScalerRec */
+ /* */
+ /* <Description> */
+ /* A structure used to describe a given character size in either */
+ /* pixels or points to the cache manager. See */
+ /* @FTC_Manager_LookupSize. */
+ /* */
+ /* <Fields> */
+ /* face_id :: The source face ID. */
+ /* */
+ /* width :: The character width. */
+ /* */
+ /* height :: The character height. */
+ /* */
+ /* pixel :: A Boolean. If 1, the `width' and `height' fields are */
+ /* interpreted as integer pixel character sizes. */
+ /* Otherwise, they are expressed as 1/64th of points. */
+ /* */
+ /* x_res :: Only used when `pixel' is value~0 to indicate the */
+ /* horizontal resolution in dpi. */
+ /* */
+ /* y_res :: Only used when `pixel' is value~0 to indicate the */
+ /* vertical resolution in dpi. */
+ /* */
+ /* <Note> */
+ /* This type is mainly used to retrieve @FT_Size objects through the */
+ /* cache manager. */
+ /* */
+ typedef struct FTC_ScalerRec_
+ {
+ FTC_FaceID face_id;
+ FT_UInt width;
+ FT_UInt height;
+ FT_Int pixel;
+ FT_UInt x_res;
+ FT_UInt y_res;
+
+ } FTC_ScalerRec;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Struct> */
+ /* FTC_Scaler */
+ /* */
+ /* <Description> */
+ /* A handle to an @FTC_ScalerRec structure. */
+ /* */
+ typedef struct FTC_ScalerRec_* FTC_Scaler;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FTC_Manager_LookupSize */
+ /* */
+ /* <Description> */
+ /* Retrieve the @FT_Size object that corresponds to a given */
+ /* @FTC_ScalerRec pointer through a cache manager. */
+ /* */
+ /* <Input> */
+ /* manager :: A handle to the cache manager. */
+ /* */
+ /* scaler :: A scaler handle. */
+ /* */
+ /* <Output> */
+ /* asize :: A handle to the size object. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* The returned @FT_Size object is always owned by the manager. You */
+ /* should never try to discard it by yourself. */
+ /* */
+ /* You can access the parent @FT_Face object simply as `size->face' */
+ /* if you need it. Note that this object is also owned by the */
+ /* manager. */
+ /* */
+ /* <Note> */
+ /* When you perform a lookup, out-of-memory errors are detected */
+ /* _within_ the lookup and force incremental flushes of the cache */
+ /* until enough memory is released for the lookup to succeed. */
+ /* */
+ /* If a lookup fails with `FT_Err_Out_Of_Memory' the cache has */
+ /* already been completely flushed, and still no memory is available */
+ /* for the operation. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FTC_Manager_LookupSize( FTC_Manager manager,
+ FTC_Scaler scaler,
+ FT_Size *asize );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FTC_Node_Unref */
+ /* */
+ /* <Description> */
+ /* Decrement a cache node's internal reference count. When the count */
+ /* reaches 0, it is not destroyed but becomes eligible for subsequent */
+ /* cache flushes. */
+ /* */
+ /* <Input> */
+ /* node :: The cache node handle. */
+ /* */
+ /* manager :: The cache manager handle. */
+ /* */
+ FT_EXPORT( void )
+ FTC_Node_Unref( FTC_Node node,
+ FTC_Manager manager );
+
+
+ /*************************************************************************
+ *
+ * @function:
+ * FTC_Manager_RemoveFaceID
+ *
+ * @description:
+ * A special function used to indicate to the cache manager that
+ * a given @FTC_FaceID is no longer valid, either because its
+ * content changed, or because it was deallocated or uninstalled.
+ *
+ * @input:
+ * manager ::
+ * The cache manager handle.
+ *
+ * face_id ::
+ * The @FTC_FaceID to be removed.
+ *
+ * @note:
+ * This function flushes all nodes from the cache corresponding to this
+ * `face_id', with the exception of nodes with a non-null reference
+ * count.
+ *
+ * Such nodes are however modified internally so as to never appear
+ * in later lookups with the same `face_id' value, and to be immediately
+ * destroyed when released by all their users.
+ *
+ */
+ FT_EXPORT( void )
+ FTC_Manager_RemoveFaceID( FTC_Manager manager,
+ FTC_FaceID face_id );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* cache_subsystem */
+ /* */
+ /*************************************************************************/
+
+ /*************************************************************************
+ *
+ * @type:
+ * FTC_CMapCache
+ *
+ * @description:
+ * An opaque handle used to model a charmap cache. This cache is to
+ * hold character codes -> glyph indices mappings.
+ *
+ */
+ typedef struct FTC_CMapCacheRec_* FTC_CMapCache;
+
+
+ /*************************************************************************
+ *
+ * @function:
+ * FTC_CMapCache_New
+ *
+ * @description:
+ * Create a new charmap cache.
+ *
+ * @input:
+ * manager ::
+ * A handle to the cache manager.
+ *
+ * @output:
+ * acache ::
+ * A new cache handle. NULL in case of error.
+ *
+ * @return:
+ * FreeType error code. 0~means success.
+ *
+ * @note:
+ * Like all other caches, this one will be destroyed with the cache
+ * manager.
+ *
+ */
+ FT_EXPORT( FT_Error )
+ FTC_CMapCache_New( FTC_Manager manager,
+ FTC_CMapCache *acache );
+
+
+ /************************************************************************
+ *
+ * @function:
+ * FTC_CMapCache_Lookup
+ *
+ * @description:
+ * Translate a character code into a glyph index, using the charmap
+ * cache.
+ *
+ * @input:
+ * cache ::
+ * A charmap cache handle.
+ *
+ * face_id ::
+ * The source face ID.
+ *
+ * cmap_index ::
+ * The index of the charmap in the source face. Any negative value
+ * means to use the cache @FT_Face's default charmap.
+ *
+ * char_code ::
+ * The character code (in the corresponding charmap).
+ *
+ * @return:
+ * Glyph index. 0~means `no glyph'.
+ *
+ */
+ FT_EXPORT( FT_UInt )
+ FTC_CMapCache_Lookup( FTC_CMapCache cache,
+ FTC_FaceID face_id,
+ FT_Int cmap_index,
+ FT_UInt32 char_code );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* cache_subsystem */
+ /* */
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /*************************************************************************/
+ /*************************************************************************/
+ /***** *****/
+ /***** IMAGE CACHE OBJECT *****/
+ /***** *****/
+ /*************************************************************************/
+ /*************************************************************************/
+ /*************************************************************************/
+
+
+ /*************************************************************************
+ *
+ * @struct:
+ * FTC_ImageTypeRec
+ *
+ * @description:
+ * A structure used to model the type of images in a glyph cache.
+ *
+ * @fields:
+ * face_id ::
+ * The face ID.
+ *
+ * width ::
+ * The width in pixels.
+ *
+ * height ::
+ * The height in pixels.
+ *
+ * flags ::
+ * The load flags, as in @FT_Load_Glyph.
+ *
+ */
+ typedef struct FTC_ImageTypeRec_
+ {
+ FTC_FaceID face_id;
+ FT_UInt width;
+ FT_UInt height;
+ FT_Int32 flags;
+
+ } FTC_ImageTypeRec;
+
+
+ /*************************************************************************
+ *
+ * @type:
+ * FTC_ImageType
+ *
+ * @description:
+ * A handle to an @FTC_ImageTypeRec structure.
+ *
+ */
+ typedef struct FTC_ImageTypeRec_* FTC_ImageType;
+
+
+ /* */
+
+
+#define FTC_IMAGE_TYPE_COMPARE( d1, d2 ) \
+ ( (d1)->face_id == (d2)->face_id && \
+ (d1)->width == (d2)->width && \
+ (d1)->flags == (d2)->flags )
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FTC_ImageCache */
+ /* */
+ /* <Description> */
+ /* A handle to a glyph image cache object. They are designed to */
+ /* hold many distinct glyph images while not exceeding a certain */
+ /* memory threshold. */
+ /* */
+ typedef struct FTC_ImageCacheRec_* FTC_ImageCache;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FTC_ImageCache_New */
+ /* */
+ /* <Description> */
+ /* Create a new glyph image cache. */
+ /* */
+ /* <Input> */
+ /* manager :: The parent manager for the image cache. */
+ /* */
+ /* <Output> */
+ /* acache :: A handle to the new glyph image cache object. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FTC_ImageCache_New( FTC_Manager manager,
+ FTC_ImageCache *acache );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FTC_ImageCache_Lookup */
+ /* */
+ /* <Description> */
+ /* Retrieve a given glyph image from a glyph image cache. */
+ /* */
+ /* <Input> */
+ /* cache :: A handle to the source glyph image cache. */
+ /* */
+ /* type :: A pointer to a glyph image type descriptor. */
+ /* */
+ /* gindex :: The glyph index to retrieve. */
+ /* */
+ /* <Output> */
+ /* aglyph :: The corresponding @FT_Glyph object. 0~in case of */
+ /* failure. */
+ /* */
+ /* anode :: Used to return the address of of the corresponding cache */
+ /* node after incrementing its reference count (see note */
+ /* below). */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* The returned glyph is owned and managed by the glyph image cache. */
+ /* Never try to transform or discard it manually! You can however */
+ /* create a copy with @FT_Glyph_Copy and modify the new one. */
+ /* */
+ /* If `anode' is _not_ NULL, it receives the address of the cache */
+ /* node containing the glyph image, after increasing its reference */
+ /* count. This ensures that the node (as well as the @FT_Glyph) will */
+ /* always be kept in the cache until you call @FTC_Node_Unref to */
+ /* `release' it. */
+ /* */
+ /* If `anode' is NULL, the cache node is left unchanged, which means */
+ /* that the @FT_Glyph could be flushed out of the cache on the next */
+ /* call to one of the caching sub-system APIs. Don't assume that it */
+ /* is persistent! */
+ /* */
+ FT_EXPORT( FT_Error )
+ FTC_ImageCache_Lookup( FTC_ImageCache cache,
+ FTC_ImageType type,
+ FT_UInt gindex,
+ FT_Glyph *aglyph,
+ FTC_Node *anode );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FTC_ImageCache_LookupScaler */
+ /* */
+ /* <Description> */
+ /* A variant of @FTC_ImageCache_Lookup that uses an @FTC_ScalerRec */
+ /* to specify the face ID and its size. */
+ /* */
+ /* <Input> */
+ /* cache :: A handle to the source glyph image cache. */
+ /* */
+ /* scaler :: A pointer to a scaler descriptor. */
+ /* */
+ /* load_flags :: The corresponding load flags. */
+ /* */
+ /* gindex :: The glyph index to retrieve. */
+ /* */
+ /* <Output> */
+ /* aglyph :: The corresponding @FT_Glyph object. 0~in case of */
+ /* failure. */
+ /* */
+ /* anode :: Used to return the address of of the corresponding */
+ /* cache node after incrementing its reference count */
+ /* (see note below). */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* The returned glyph is owned and managed by the glyph image cache. */
+ /* Never try to transform or discard it manually! You can however */
+ /* create a copy with @FT_Glyph_Copy and modify the new one. */
+ /* */
+ /* If `anode' is _not_ NULL, it receives the address of the cache */
+ /* node containing the glyph image, after increasing its reference */
+ /* count. This ensures that the node (as well as the @FT_Glyph) will */
+ /* always be kept in the cache until you call @FTC_Node_Unref to */
+ /* `release' it. */
+ /* */
+ /* If `anode' is NULL, the cache node is left unchanged, which means */
+ /* that the @FT_Glyph could be flushed out of the cache on the next */
+ /* call to one of the caching sub-system APIs. Don't assume that it */
+ /* is persistent! */
+ /* */
+ /* Calls to @FT_Set_Char_Size and friends have no effect on cached */
+ /* glyphs; you should always use the FreeType cache API instead. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FTC_ImageCache_LookupScaler( FTC_ImageCache cache,
+ FTC_Scaler scaler,
+ FT_ULong load_flags,
+ FT_UInt gindex,
+ FT_Glyph *aglyph,
+ FTC_Node *anode );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FTC_SBit */
+ /* */
+ /* <Description> */
+ /* A handle to a small bitmap descriptor. See the @FTC_SBitRec */
+ /* structure for details. */
+ /* */
+ typedef struct FTC_SBitRec_* FTC_SBit;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Struct> */
+ /* FTC_SBitRec */
+ /* */
+ /* <Description> */
+ /* A very compact structure used to describe a small glyph bitmap. */
+ /* */
+ /* <Fields> */
+ /* width :: The bitmap width in pixels. */
+ /* */
+ /* height :: The bitmap height in pixels. */
+ /* */
+ /* left :: The horizontal distance from the pen position to the */
+ /* left bitmap border (a.k.a. `left side bearing', or */
+ /* `lsb'). */
+ /* */
+ /* top :: The vertical distance from the pen position (on the */
+ /* baseline) to the upper bitmap border (a.k.a. `top */
+ /* side bearing'). The distance is positive for upwards */
+ /* y~coordinates. */
+ /* */
+ /* format :: The format of the glyph bitmap (monochrome or gray). */
+ /* */
+ /* max_grays :: Maximum gray level value (in the range 1 to~255). */
+ /* */
+ /* pitch :: The number of bytes per bitmap line. May be positive */
+ /* or negative. */
+ /* */
+ /* xadvance :: The horizontal advance width in pixels. */
+ /* */
+ /* yadvance :: The vertical advance height in pixels. */
+ /* */
+ /* buffer :: A pointer to the bitmap pixels. */
+ /* */
+ typedef struct FTC_SBitRec_
+ {
+ FT_Byte width;
+ FT_Byte height;
+ FT_Char left;
+ FT_Char top;
+
+ FT_Byte format;
+ FT_Byte max_grays;
+ FT_Short pitch;
+ FT_Char xadvance;
+ FT_Char yadvance;
+
+ FT_Byte* buffer;
+
+ } FTC_SBitRec;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FTC_SBitCache */
+ /* */
+ /* <Description> */
+ /* A handle to a small bitmap cache. These are special cache objects */
+ /* used to store small glyph bitmaps (and anti-aliased pixmaps) in a */
+ /* much more efficient way than the traditional glyph image cache */
+ /* implemented by @FTC_ImageCache. */
+ /* */
+ typedef struct FTC_SBitCacheRec_* FTC_SBitCache;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FTC_SBitCache_New */
+ /* */
+ /* <Description> */
+ /* Create a new cache to store small glyph bitmaps. */
+ /* */
+ /* <Input> */
+ /* manager :: A handle to the source cache manager. */
+ /* */
+ /* <Output> */
+ /* acache :: A handle to the new sbit cache. NULL in case of error. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FTC_SBitCache_New( FTC_Manager manager,
+ FTC_SBitCache *acache );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FTC_SBitCache_Lookup */
+ /* */
+ /* <Description> */
+ /* Look up a given small glyph bitmap in a given sbit cache and */
+ /* `lock' it to prevent its flushing from the cache until needed. */
+ /* */
+ /* <Input> */
+ /* cache :: A handle to the source sbit cache. */
+ /* */
+ /* type :: A pointer to the glyph image type descriptor. */
+ /* */
+ /* gindex :: The glyph index. */
+ /* */
+ /* <Output> */
+ /* sbit :: A handle to a small bitmap descriptor. */
+ /* */
+ /* anode :: Used to return the address of of the corresponding cache */
+ /* node after incrementing its reference count (see note */
+ /* below). */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* The small bitmap descriptor and its bit buffer are owned by the */
+ /* cache and should never be freed by the application. They might */
+ /* as well disappear from memory on the next cache lookup, so don't */
+ /* treat them as persistent data. */
+ /* */
+ /* The descriptor's `buffer' field is set to~0 to indicate a missing */
+ /* glyph bitmap. */
+ /* */
+ /* If `anode' is _not_ NULL, it receives the address of the cache */
+ /* node containing the bitmap, after increasing its reference count. */
+ /* This ensures that the node (as well as the image) will always be */
+ /* kept in the cache until you call @FTC_Node_Unref to `release' it. */
+ /* */
+ /* If `anode' is NULL, the cache node is left unchanged, which means */
+ /* that the bitmap could be flushed out of the cache on the next */
+ /* call to one of the caching sub-system APIs. Don't assume that it */
+ /* is persistent! */
+ /* */
+ FT_EXPORT( FT_Error )
+ FTC_SBitCache_Lookup( FTC_SBitCache cache,
+ FTC_ImageType type,
+ FT_UInt gindex,
+ FTC_SBit *sbit,
+ FTC_Node *anode );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FTC_SBitCache_LookupScaler */
+ /* */
+ /* <Description> */
+ /* A variant of @FTC_SBitCache_Lookup that uses an @FTC_ScalerRec */
+ /* to specify the face ID and its size. */
+ /* */
+ /* <Input> */
+ /* cache :: A handle to the source sbit cache. */
+ /* */
+ /* scaler :: A pointer to the scaler descriptor. */
+ /* */
+ /* load_flags :: The corresponding load flags. */
+ /* */
+ /* gindex :: The glyph index. */
+ /* */
+ /* <Output> */
+ /* sbit :: A handle to a small bitmap descriptor. */
+ /* */
+ /* anode :: Used to return the address of of the corresponding */
+ /* cache node after incrementing its reference count */
+ /* (see note below). */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* The small bitmap descriptor and its bit buffer are owned by the */
+ /* cache and should never be freed by the application. They might */
+ /* as well disappear from memory on the next cache lookup, so don't */
+ /* treat them as persistent data. */
+ /* */
+ /* The descriptor's `buffer' field is set to~0 to indicate a missing */
+ /* glyph bitmap. */
+ /* */
+ /* If `anode' is _not_ NULL, it receives the address of the cache */
+ /* node containing the bitmap, after increasing its reference count. */
+ /* This ensures that the node (as well as the image) will always be */
+ /* kept in the cache until you call @FTC_Node_Unref to `release' it. */
+ /* */
+ /* If `anode' is NULL, the cache node is left unchanged, which means */
+ /* that the bitmap could be flushed out of the cache on the next */
+ /* call to one of the caching sub-system APIs. Don't assume that it */
+ /* is persistent! */
+ /* */
+ FT_EXPORT( FT_Error )
+ FTC_SBitCache_LookupScaler( FTC_SBitCache cache,
+ FTC_Scaler scaler,
+ FT_ULong load_flags,
+ FT_UInt gindex,
+ FTC_SBit *sbit,
+ FTC_Node *anode );
+
+ /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTCACHE_H__ */
+
+
+/* END */
diff --git a/freetype/include/freetype/ftcffdrv.h b/freetype/include/freetype/ftcffdrv.h
new file mode 100644
index 0000000..8500346
--- /dev/null
+++ b/freetype/include/freetype/ftcffdrv.h
@@ -0,0 +1,262 @@
+/***************************************************************************/
+/* */
+/* ftcffdrv.h */
+/* */
+/* FreeType API for controlling the CFF driver (specification only). */
+/* */
+/* Copyright 2013-2015 by */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+
+#ifndef __FTCFFDRV_H__
+#define __FTCFFDRV_H__
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+ /**************************************************************************
+ *
+ * @section:
+ * cff_driver
+ *
+ * @title:
+ * The CFF driver
+ *
+ * @abstract:
+ * Controlling the CFF driver module.
+ *
+ * @description:
+ * While FreeType's CFF driver doesn't expose API functions by itself,
+ * it is possible to control its behaviour with @FT_Property_Set and
+ * @FT_Property_Get. The list below gives the available properties
+ * together with the necessary macros and structures.
+ *
+ * The CFF driver's module name is `cff'.
+ *
+ * *Hinting* *and* *antialiasing* *principles* *of* *the* *new* *engine*
+ *
+ * The rasterizer is positioning horizontal features (e.g., ascender
+ * height & x-height, or crossbars) on the pixel grid and minimizing the
+ * amount of antialiasing applied to them, while placing vertical
+ * features (vertical stems) on the pixel grid without hinting, thus
+ * representing the stem position and weight accurately. Sometimes the
+ * vertical stems may be only partially black. In this context,
+ * `antialiasing' means that stems are not positioned exactly on pixel
+ * borders, causing a fuzzy appearance.
+ *
+ * There are two principles behind this approach.
+ *
+ * 1) No hinting in the horizontal direction: Unlike `superhinted'
+ * TrueType, which changes glyph widths to accommodate regular
+ * inter-glyph spacing, Adobe's approach is `faithful to the design' in
+ * representing both the glyph width and the inter-glyph spacing
+ * designed for the font. This makes the screen display as close as it
+ * can be to the result one would get with infinite resolution, while
+ * preserving what is considered the key characteristics of each glyph.
+ * Note that the distances between unhinted and grid-fitted positions at
+ * small sizes are comparable to kerning values and thus would be
+ * noticeable (and distracting) while reading if hinting were applied.
+ *
+ * One of the reasons to not hint horizontally is antialiasing for LCD
+ * screens: The pixel geometry of modern displays supplies three
+ * vertical sub-pixels as the eye moves horizontally across each visible
+ * pixel. On devices where we can be certain this characteristic is
+ * present a rasterizer can take advantage of the sub-pixels to add
+ * increments of weight. In Western writing systems this turns out to
+ * be the more critical direction anyway; the weights and spacing of
+ * vertical stems (see above) are central to Armenian, Cyrillic, Greek,
+ * and Latin type designs. Even when the rasterizer uses greyscale
+ * antialiasing instead of color (a necessary compromise when one
+ * doesn't know the screen characteristics), the unhinted vertical
+ * features preserve the design's weight and spacing much better than
+ * aliased type would.
+ *
+ * 2) Aligment in the vertical direction: Weights and spacing along the
+ * y~axis are less critical; what is much more important is the visual
+ * alignment of related features (like cap-height and x-height). The
+ * sense of alignment for these is enhanced by the sharpness of grid-fit
+ * edges, while the cruder vertical resolution (full pixels instead of
+ * 1/3 pixels) is less of a problem.
+ *
+ * On the technical side, horizontal alignment zones for ascender,
+ * x-height, and other important height values (traditionally called
+ * `blue zones') as defined in the font are positioned independently,
+ * each being rounded to the nearest pixel edge, taking care of
+ * overshoot suppression at small sizes, stem darkening, and scaling.
+ *
+ * Hstems (this is, hint values defined in the font to help align
+ * horizontal features) that fall within a blue zone are said to be
+ * `captured' and are aligned to that zone. Uncaptured stems are moved
+ * in one of four ways, top edge up or down, bottom edge up or down.
+ * Unless there are conflicting hstems, the smallest movement is taken
+ * to minimize distortion.
+ *
+ * @order:
+ * hinting-engine
+ * no-stem-darkening[cff]
+ * darkening-parameters[cff]
+ *
+ */
+
+
+ /**************************************************************************
+ *
+ * @property:
+ * hinting-engine
+ *
+ * @description:
+ * Thanks to Adobe, which contributed a new hinting (and parsing)
+ * engine, an application can select between `freetype' and `adobe' if
+ * compiled with CFF_CONFIG_OPTION_OLD_ENGINE. If this configuration
+ * macro isn't defined, `hinting-engine' does nothing.
+ *
+ * The default engine is `freetype' if CFF_CONFIG_OPTION_OLD_ENGINE is
+ * defined, and `adobe' otherwise.
+ *
+ * The following example code demonstrates how to select Adobe's hinting
+ * engine (omitting the error handling).
+ *
+ * {
+ * FT_Library library;
+ * FT_UInt hinting_engine = FT_CFF_HINTING_ADOBE;
+ *
+ *
+ * FT_Init_FreeType( &library );
+ *
+ * FT_Property_Set( library, "cff",
+ * "hinting-engine", &hinting_engine );
+ * }
+ *
+ * @note:
+ * This property can be used with @FT_Property_Get also.
+ *
+ */
+
+
+ /**************************************************************************
+ *
+ * @enum:
+ * FT_CFF_HINTING_XXX
+ *
+ * @description:
+ * A list of constants used for the @hinting-engine property to select
+ * the hinting engine for CFF fonts.
+ *
+ * @values:
+ * FT_CFF_HINTING_FREETYPE ::
+ * Use the old FreeType hinting engine.
+ *
+ * FT_CFF_HINTING_ADOBE ::
+ * Use the hinting engine contributed by Adobe.
+ *
+ */
+#define FT_CFF_HINTING_FREETYPE 0
+#define FT_CFF_HINTING_ADOBE 1
+
+
+ /**************************************************************************
+ *
+ * @property:
+ * no-stem-darkening[cff]
+ *
+ * @description:
+ * By default, the Adobe CFF engine darkens stems at smaller sizes,
+ * regardless of hinting, to enhance contrast. This feature requires
+ * a rendering system with proper gamma correction. Setting this
+ * property, stem darkening gets switched off.
+ *
+ * Note that stem darkening is never applied if @FT_LOAD_NO_SCALE is set.
+ *
+ * {
+ * FT_Library library;
+ * FT_Bool no_stem_darkening = TRUE;
+ *
+ *
+ * FT_Init_FreeType( &library );
+ *
+ * FT_Property_Set( library, "cff",
+ * "no-stem-darkening", &no_stem_darkening );
+ * }
+ *
+ * @note:
+ * This property can be used with @FT_Property_Get also.
+ *
+ */
+
+
+ /**************************************************************************
+ *
+ * @property:
+ * darkening-parameters[cff]
+ *
+ * @description:
+ * By default, the Adobe CFF engine darkens stems as follows (if the
+ * `no-stem-darkening' property isn't set):
+ *
+ * {
+ * stem width <= 0.5px: darkening amount = 0.4px
+ * stem width = 1px: darkening amount = 0.275px
+ * stem width = 1.667px: darkening amount = 0.275px
+ * stem width >= 2.333px: darkening amount = 0px
+ * }
+ *
+ * and piecewise linear in-between. At configuration time, these four
+ * control points can be set with the macro
+ * `CFF_CONFIG_OPTION_DARKENING_PARAMETERS'. At runtime, the control
+ * points can be changed using the `darkening-parameters' property, as
+ * the following example demonstrates.
+ *
+ * {
+ * FT_Library library;
+ * FT_Int darken_params[8] = { 500, 300, // x1, y1
+ * 1000, 200, // x2, y2
+ * 1500, 100, // x3, y3
+ * 2000, 0 }; // x4, y4
+ *
+ *
+ * FT_Init_FreeType( &library );
+ *
+ * FT_Property_Set( library, "cff",
+ * "darkening-parameters", darken_params );
+ * }
+ *
+ * The x~values give the stem width, and the y~values the darkening
+ * amount. The unit is 1000th of pixels. All coordinate values must be
+ * positive; the x~values must be monotonically increasing; the
+ * y~values must be monotonically decreasing and smaller than or
+ * equal to 500 (corresponding to half a pixel); the slope of each
+ * linear piece must be shallower than -1 (e.g., -.4).
+ *
+ * @note:
+ * This property can be used with @FT_Property_Get also.
+ *
+ */
+
+ /* */
+
+
+FT_END_HEADER
+
+
+#endif /* __FTCFFDRV_H__ */
+
+
+/* END */
diff --git a/freetype/include/freetype/ftchapters.h b/freetype/include/freetype/ftchapters.h
new file mode 100644
index 0000000..ab43895
--- /dev/null
+++ b/freetype/include/freetype/ftchapters.h
@@ -0,0 +1,135 @@
+/***************************************************************************/
+/* */
+/* This file defines the structure of the FreeType reference. */
+/* It is used by the python script that generates the HTML files. */
+/* */
+/***************************************************************************/
+
+
+/***************************************************************************/
+/* */
+/* <Chapter> */
+/* general_remarks */
+/* */
+/* <Title> */
+/* General Remarks */
+/* */
+/* <Sections> */
+/* header_inclusion */
+/* user_allocation */
+/* */
+/***************************************************************************/
+
+
+/***************************************************************************/
+/* */
+/* <Chapter> */
+/* core_api */
+/* */
+/* <Title> */
+/* Core API */
+/* */
+/* <Sections> */
+/* version */
+/* basic_types */
+/* base_interface */
+/* glyph_variants */
+/* glyph_management */
+/* mac_specific */
+/* sizes_management */
+/* header_file_macros */
+/* */
+/***************************************************************************/
+
+
+/***************************************************************************/
+/* */
+/* <Chapter> */
+/* format_specific */
+/* */
+/* <Title> */
+/* Format-Specific API */
+/* */
+/* <Sections> */
+/* multiple_masters */
+/* truetype_tables */
+/* type1_tables */
+/* sfnt_names */
+/* bdf_fonts */
+/* cid_fonts */
+/* pfr_fonts */
+/* winfnt_fonts */
+/* font_formats */
+/* gasp_table */
+/* */
+/***************************************************************************/
+
+
+/***************************************************************************/
+/* */
+/* <Chapter> */
+/* module_specific */
+/* */
+/* <Title> */
+/* Controlling FreeType Modules */
+/* */
+/* <Sections> */
+/* auto_hinter */
+/* cff_driver */
+/* tt_driver */
+/* */
+/***************************************************************************/
+
+
+/***************************************************************************/
+/* */
+/* <Chapter> */
+/* cache_subsystem */
+/* */
+/* <Title> */
+/* Cache Sub-System */
+/* */
+/* <Sections> */
+/* cache_subsystem */
+/* */
+/***************************************************************************/
+
+
+/***************************************************************************/
+/* */
+/* <Chapter> */
+/* support_api */
+/* */
+/* <Title> */
+/* Support API */
+/* */
+/* <Sections> */
+/* computations */
+/* list_processing */
+/* outline_processing */
+/* quick_advance */
+/* bitmap_handling */
+/* raster */
+/* glyph_stroker */
+/* system_interface */
+/* module_management */
+/* gzip */
+/* lzw */
+/* bzip2 */
+/* lcd_filtering */
+/* */
+/***************************************************************************/
+
+/***************************************************************************/
+/* */
+/* <Chapter> */
+/* error_codes */
+/* */
+/* <Title> */
+/* Error Codes */
+/* */
+/* <Sections> */
+/* error_enumerations */
+/* error_code_values */
+/* */
+/***************************************************************************/
diff --git a/freetype/include/freetype/ftcid.h b/freetype/include/freetype/ftcid.h
new file mode 100644
index 0000000..05741c8
--- /dev/null
+++ b/freetype/include/freetype/ftcid.h
@@ -0,0 +1,168 @@
+/***************************************************************************/
+/* */
+/* ftcid.h */
+/* */
+/* FreeType API for accessing CID font information (specification). */
+/* */
+/* Copyright 2007-2015 by */
+/* Dereg Clegg and Michael Toftdal. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+
+#ifndef __FTCID_H__
+#define __FTCID_H__
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* cid_fonts */
+ /* */
+ /* <Title> */
+ /* CID Fonts */
+ /* */
+ /* <Abstract> */
+ /* CID-keyed font specific API. */
+ /* */
+ /* <Description> */
+ /* This section contains the declaration of CID-keyed font specific */
+ /* functions. */
+ /* */
+ /*************************************************************************/
+
+
+ /**********************************************************************
+ *
+ * @function:
+ * FT_Get_CID_Registry_Ordering_Supplement
+ *
+ * @description:
+ * Retrieve the Registry/Ordering/Supplement triple (also known as the
+ * "R/O/S") from a CID-keyed font.
+ *
+ * @input:
+ * face ::
+ * A handle to the input face.
+ *
+ * @output:
+ * registry ::
+ * The registry, as a C~string, owned by the face.
+ *
+ * ordering ::
+ * The ordering, as a C~string, owned by the face.
+ *
+ * supplement ::
+ * The supplement.
+ *
+ * @return:
+ * FreeType error code. 0~means success.
+ *
+ * @note:
+ * This function only works with CID faces, returning an error
+ * otherwise.
+ *
+ * @since:
+ * 2.3.6
+ */
+ FT_EXPORT( FT_Error )
+ FT_Get_CID_Registry_Ordering_Supplement( FT_Face face,
+ const char* *registry,
+ const char* *ordering,
+ FT_Int *supplement);
+
+
+ /**********************************************************************
+ *
+ * @function:
+ * FT_Get_CID_Is_Internally_CID_Keyed
+ *
+ * @description:
+ * Retrieve the type of the input face, CID keyed or not. In
+ * constrast to the @FT_IS_CID_KEYED macro this function returns
+ * successfully also for CID-keyed fonts in an SNFT wrapper.
+ *
+ * @input:
+ * face ::
+ * A handle to the input face.
+ *
+ * @output:
+ * is_cid ::
+ * The type of the face as an @FT_Bool.
+ *
+ * @return:
+ * FreeType error code. 0~means success.
+ *
+ * @note:
+ * This function only works with CID faces and OpenType fonts,
+ * returning an error otherwise.
+ *
+ * @since:
+ * 2.3.9
+ */
+ FT_EXPORT( FT_Error )
+ FT_Get_CID_Is_Internally_CID_Keyed( FT_Face face,
+ FT_Bool *is_cid );
+
+
+ /**********************************************************************
+ *
+ * @function:
+ * FT_Get_CID_From_Glyph_Index
+ *
+ * @description:
+ * Retrieve the CID of the input glyph index.
+ *
+ * @input:
+ * face ::
+ * A handle to the input face.
+ *
+ * glyph_index ::
+ * The input glyph index.
+ *
+ * @output:
+ * cid ::
+ * The CID as an @FT_UInt.
+ *
+ * @return:
+ * FreeType error code. 0~means success.
+ *
+ * @note:
+ * This function only works with CID faces and OpenType fonts,
+ * returning an error otherwise.
+ *
+ * @since:
+ * 2.3.9
+ */
+ FT_EXPORT( FT_Error )
+ FT_Get_CID_From_Glyph_Index( FT_Face face,
+ FT_UInt glyph_index,
+ FT_UInt *cid );
+
+ /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTCID_H__ */
+
+
+/* END */
diff --git a/freetype/include/freetype/fterrdef.h b/freetype/include/freetype/fterrdef.h
new file mode 100644
index 0000000..3bf4e63
--- /dev/null
+++ b/freetype/include/freetype/fterrdef.h
@@ -0,0 +1,276 @@
+/***************************************************************************/
+/* */
+/* fterrdef.h */
+/* */
+/* FreeType error codes (specification). */
+/* */
+/* Copyright 2002-2015 by */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* error_code_values */
+ /* */
+ /* <Title> */
+ /* Error Code Values */
+ /* */
+ /* <Abstract> */
+ /* All possible error codes returned by FreeType functions. */
+ /* */
+ /* <Description> */
+ /* The list below is taken verbatim from the file `fterrdef.h' */
+ /* (loaded automatically by including `FT_FREETYPE_H'). The first */
+ /* argument of the `FT_ERROR_DEF_' macro is the error label; by */
+ /* default, the prefix `FT_Err_' gets added so that you get error */
+ /* names like `FT_Err_Cannot_Open_Resource'. The second argument is */
+ /* the error code, and the last argument an error string, which is not */
+ /* used by FreeType. */
+ /* */
+ /* Within your application you should *only* use error names and */
+ /* *never* its numeric values! The latter might (and actually do) */
+ /* change in forthcoming FreeType versions. */
+ /* */
+ /* Macro `FT_NOERRORDEF_' defines `FT_Err_Ok', which is always zero. */
+ /* See the `Error Enumerations' subsection how to automatically */
+ /* generate a list of error strings. */
+ /* */
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* <Enum> */
+ /* FT_Err_XXX */
+ /* */
+ /*************************************************************************/
+
+ /* generic errors */
+
+ FT_NOERRORDEF_( Ok, 0x00,
+ "no error" )
+
+ FT_ERRORDEF_( Cannot_Open_Resource, 0x01,
+ "cannot open resource" )
+ FT_ERRORDEF_( Unknown_File_Format, 0x02,
+ "unknown file format" )
+ FT_ERRORDEF_( Invalid_File_Format, 0x03,
+ "broken file" )
+ FT_ERRORDEF_( Invalid_Version, 0x04,
+ "invalid FreeType version" )
+ FT_ERRORDEF_( Lower_Module_Version, 0x05,
+ "module version is too low" )
+ FT_ERRORDEF_( Invalid_Argument, 0x06,
+ "invalid argument" )
+ FT_ERRORDEF_( Unimplemented_Feature, 0x07,
+ "unimplemented feature" )
+ FT_ERRORDEF_( Invalid_Table, 0x08,
+ "broken table" )
+ FT_ERRORDEF_( Invalid_Offset, 0x09,
+ "broken offset within table" )
+ FT_ERRORDEF_( Array_Too_Large, 0x0A,
+ "array allocation size too large" )
+ FT_ERRORDEF_( Missing_Module, 0x0B,
+ "missing module" )
+ FT_ERRORDEF_( Missing_Property, 0x0C,
+ "missing property" )
+
+ /* glyph/character errors */
+
+ FT_ERRORDEF_( Invalid_Glyph_Index, 0x10,
+ "invalid glyph index" )
+ FT_ERRORDEF_( Invalid_Character_Code, 0x11,
+ "invalid character code" )
+ FT_ERRORDEF_( Invalid_Glyph_Format, 0x12,
+ "unsupported glyph image format" )
+ FT_ERRORDEF_( Cannot_Render_Glyph, 0x13,
+ "cannot render this glyph format" )
+ FT_ERRORDEF_( Invalid_Outline, 0x14,
+ "invalid outline" )
+ FT_ERRORDEF_( Invalid_Composite, 0x15,
+ "invalid composite glyph" )
+ FT_ERRORDEF_( Too_Many_Hints, 0x16,
+ "too many hints" )
+ FT_ERRORDEF_( Invalid_Pixel_Size, 0x17,
+ "invalid pixel size" )
+
+ /* handle errors */
+
+ FT_ERRORDEF_( Invalid_Handle, 0x20,
+ "invalid object handle" )
+ FT_ERRORDEF_( Invalid_Library_Handle, 0x21,
+ "invalid library handle" )
+ FT_ERRORDEF_( Invalid_Driver_Handle, 0x22,
+ "invalid module handle" )
+ FT_ERRORDEF_( Invalid_Face_Handle, 0x23,
+ "invalid face handle" )
+ FT_ERRORDEF_( Invalid_Size_Handle, 0x24,
+ "invalid size handle" )
+ FT_ERRORDEF_( Invalid_Slot_Handle, 0x25,
+ "invalid glyph slot handle" )
+ FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26,
+ "invalid charmap handle" )
+ FT_ERRORDEF_( Invalid_Cache_Handle, 0x27,
+ "invalid cache manager handle" )
+ FT_ERRORDEF_( Invalid_Stream_Handle, 0x28,
+ "invalid stream handle" )
+
+ /* driver errors */
+
+ FT_ERRORDEF_( Too_Many_Drivers, 0x30,
+ "too many modules" )
+ FT_ERRORDEF_( Too_Many_Extensions, 0x31,
+ "too many extensions" )
+
+ /* memory errors */
+
+ FT_ERRORDEF_( Out_Of_Memory, 0x40,
+ "out of memory" )
+ FT_ERRORDEF_( Unlisted_Object, 0x41,
+ "unlisted object" )
+
+ /* stream errors */
+
+ FT_ERRORDEF_( Cannot_Open_Stream, 0x51,
+ "cannot open stream" )
+ FT_ERRORDEF_( Invalid_Stream_Seek, 0x52,
+ "invalid stream seek" )
+ FT_ERRORDEF_( Invalid_Stream_Skip, 0x53,
+ "invalid stream skip" )
+ FT_ERRORDEF_( Invalid_Stream_Read, 0x54,
+ "invalid stream read" )
+ FT_ERRORDEF_( Invalid_Stream_Operation, 0x55,
+ "invalid stream operation" )
+ FT_ERRORDEF_( Invalid_Frame_Operation, 0x56,
+ "invalid frame operation" )
+ FT_ERRORDEF_( Nested_Frame_Access, 0x57,
+ "nested frame access" )
+ FT_ERRORDEF_( Invalid_Frame_Read, 0x58,
+ "invalid frame read" )
+
+ /* raster errors */
+
+ FT_ERRORDEF_( Raster_Uninitialized, 0x60,
+ "raster uninitialized" )
+ FT_ERRORDEF_( Raster_Corrupted, 0x61,
+ "raster corrupted" )
+ FT_ERRORDEF_( Raster_Overflow, 0x62,
+ "raster overflow" )
+ FT_ERRORDEF_( Raster_Negative_Height, 0x63,
+ "negative height while rastering" )
+
+ /* cache errors */
+
+ FT_ERRORDEF_( Too_Many_Caches, 0x70,
+ "too many registered caches" )
+
+ /* TrueType and SFNT errors */
+
+ FT_ERRORDEF_( Invalid_Opcode, 0x80,
+ "invalid opcode" )
+ FT_ERRORDEF_( Too_Few_Arguments, 0x81,
+ "too few arguments" )
+ FT_ERRORDEF_( Stack_Overflow, 0x82,
+ "stack overflow" )
+ FT_ERRORDEF_( Code_Overflow, 0x83,
+ "code overflow" )
+ FT_ERRORDEF_( Bad_Argument, 0x84,
+ "bad argument" )
+ FT_ERRORDEF_( Divide_By_Zero, 0x85,
+ "division by zero" )
+ FT_ERRORDEF_( Invalid_Reference, 0x86,
+ "invalid reference" )
+ FT_ERRORDEF_( Debug_OpCode, 0x87,
+ "found debug opcode" )
+ FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88,
+ "found ENDF opcode in execution stream" )
+ FT_ERRORDEF_( Nested_DEFS, 0x89,
+ "nested DEFS" )
+ FT_ERRORDEF_( Invalid_CodeRange, 0x8A,
+ "invalid code range" )
+ FT_ERRORDEF_( Execution_Too_Long, 0x8B,
+ "execution context too long" )
+ FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C,
+ "too many function definitions" )
+ FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D,
+ "too many instruction definitions" )
+ FT_ERRORDEF_( Table_Missing, 0x8E,
+ "SFNT font table missing" )
+ FT_ERRORDEF_( Horiz_Header_Missing, 0x8F,
+ "horizontal header (hhea) table missing" )
+ FT_ERRORDEF_( Locations_Missing, 0x90,
+ "locations (loca) table missing" )
+ FT_ERRORDEF_( Name_Table_Missing, 0x91,
+ "name table missing" )
+ FT_ERRORDEF_( CMap_Table_Missing, 0x92,
+ "character map (cmap) table missing" )
+ FT_ERRORDEF_( Hmtx_Table_Missing, 0x93,
+ "horizontal metrics (hmtx) table missing" )
+ FT_ERRORDEF_( Post_Table_Missing, 0x94,
+ "PostScript (post) table missing" )
+ FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95,
+ "invalid horizontal metrics" )
+ FT_ERRORDEF_( Invalid_CharMap_Format, 0x96,
+ "invalid character map (cmap) format" )
+ FT_ERRORDEF_( Invalid_PPem, 0x97,
+ "invalid ppem value" )
+ FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98,
+ "invalid vertical metrics" )
+ FT_ERRORDEF_( Could_Not_Find_Context, 0x99,
+ "could not find context" )
+ FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A,
+ "invalid PostScript (post) table format" )
+ FT_ERRORDEF_( Invalid_Post_Table, 0x9B,
+ "invalid PostScript (post) table" )
+
+ /* CFF, CID, and Type 1 errors */
+
+ FT_ERRORDEF_( Syntax_Error, 0xA0,
+ "opcode syntax error" )
+ FT_ERRORDEF_( Stack_Underflow, 0xA1,
+ "argument stack underflow" )
+ FT_ERRORDEF_( Ignore, 0xA2,
+ "ignore" )
+ FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3,
+ "no Unicode glyph name found" )
+ FT_ERRORDEF_( Glyph_Too_Big, 0xA4,
+ "glyph too big for hinting" )
+
+ /* BDF errors */
+
+ FT_ERRORDEF_( Missing_Startfont_Field, 0xB0,
+ "`STARTFONT' field missing" )
+ FT_ERRORDEF_( Missing_Font_Field, 0xB1,
+ "`FONT' field missing" )
+ FT_ERRORDEF_( Missing_Size_Field, 0xB2,
+ "`SIZE' field missing" )
+ FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3,
+ "`FONTBOUNDINGBOX' field missing" )
+ FT_ERRORDEF_( Missing_Chars_Field, 0xB4,
+ "`CHARS' field missing" )
+ FT_ERRORDEF_( Missing_Startchar_Field, 0xB5,
+ "`STARTCHAR' field missing" )
+ FT_ERRORDEF_( Missing_Encoding_Field, 0xB6,
+ "`ENCODING' field missing" )
+ FT_ERRORDEF_( Missing_Bbx_Field, 0xB7,
+ "`BBX' field missing" )
+ FT_ERRORDEF_( Bbx_Too_Big, 0xB8,
+ "`BBX' too big" )
+ FT_ERRORDEF_( Corrupted_Font_Header, 0xB9,
+ "Font header corrupted or missing fields" )
+ FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA,
+ "Font glyphs corrupted or missing fields" )
+
+ /* */
+
+
+/* END */
diff --git a/freetype/include/freetype/fterrors.h b/freetype/include/freetype/fterrors.h
new file mode 100644
index 0000000..0507b9a
--- /dev/null
+++ b/freetype/include/freetype/fterrors.h
@@ -0,0 +1,216 @@
+/***************************************************************************/
+/* */
+/* fterrors.h */
+/* */
+/* FreeType error code handling (specification). */
+/* */
+/* Copyright 1996-2015 by */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* error_enumerations */
+ /* */
+ /* <Title> */
+ /* Error Enumerations */
+ /* */
+ /* <Abstract> */
+ /* How to handle errors and error strings. */
+ /* */
+ /* <Description> */
+ /* The header file `fterrors.h' (which is automatically included by */
+ /* `freetype.h' defines the handling of FreeType's enumeration */
+ /* constants. It can also be used to generate error message strings */
+ /* with a small macro trick explained below. */
+ /* */
+ /* *Error* *Formats* */
+ /* */
+ /* The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be */
+ /* defined in `ftoption.h' in order to make the higher byte indicate */
+ /* the module where the error has happened (this is not compatible */
+ /* with standard builds of FreeType 2, however). See the file */
+ /* `ftmoderr.h' for more details. */
+ /* */
+ /* *Error* *Message* *Strings* */
+ /* */
+ /* Error definitions are set up with special macros that allow client */
+ /* applications to build a table of error message strings. The */
+ /* strings are not included in a normal build of FreeType 2 to */
+ /* save space (most client applications do not use them). */
+ /* */
+ /* To do so, you have to define the following macros before including */
+ /* this file. */
+ /* */
+ /* { */
+ /* FT_ERROR_START_LIST */
+ /* } */
+ /* */
+ /* This macro is called before anything else to define the start of */
+ /* the error list. It is followed by several FT_ERROR_DEF calls. */
+ /* */
+ /* { */
+ /* FT_ERROR_DEF( e, v, s ) */
+ /* } */
+ /* */
+ /* This macro is called to define one single error. `e' is the error */
+ /* code identifier (e.g., `Invalid_Argument'), `v' is the error's */
+ /* numerical value, and `s' is the corresponding error string. */
+ /* */
+ /* { */
+ /* FT_ERROR_END_LIST */
+ /* } */
+ /* */
+ /* This macro ends the list. */
+ /* */
+ /* Additionally, you have to undefine `__FTERRORS_H__' before */
+ /* #including this file. */
+ /* */
+ /* Here is a simple example. */
+ /* */
+ /* { */
+ /* #undef __FTERRORS_H__ */
+ /* #define FT_ERRORDEF( e, v, s ) { e, s }, */
+ /* #define FT_ERROR_START_LIST { */
+ /* #define FT_ERROR_END_LIST { 0, NULL } }; */
+ /* */
+ /* const struct */
+ /* { */
+ /* int err_code; */
+ /* const char* err_msg; */
+ /* } ft_errors[] = */
+ /* */
+ /* #include FT_ERRORS_H */
+ /* } */
+ /* */
+ /* Note that `FT_Err_Ok' is _not_ defined with `FT_ERRORDEF' but with */
+ /* `FT_NOERRORDEF'; it is always zero. */
+ /* */
+ /*************************************************************************/
+
+ /* */
+
+#ifndef __FTERRORS_H__
+#define __FTERRORS_H__
+
+
+ /* include module base error codes */
+#include FT_MODULE_ERRORS_H
+
+
+ /*******************************************************************/
+ /*******************************************************************/
+ /***** *****/
+ /***** SETUP MACROS *****/
+ /***** *****/
+ /*******************************************************************/
+ /*******************************************************************/
+
+
+#undef FT_NEED_EXTERN_C
+
+
+ /* FT_ERR_PREFIX is used as a prefix for error identifiers. */
+ /* By default, we use `FT_Err_'. */
+ /* */
+#ifndef FT_ERR_PREFIX
+#define FT_ERR_PREFIX FT_Err_
+#endif
+
+
+ /* FT_ERR_BASE is used as the base for module-specific errors. */
+ /* */
+#ifdef FT_CONFIG_OPTION_USE_MODULE_ERRORS
+
+#ifndef FT_ERR_BASE
+#define FT_ERR_BASE FT_Mod_Err_Base
+#endif
+
+#else
+
+#undef FT_ERR_BASE
+#define FT_ERR_BASE 0
+
+#endif /* FT_CONFIG_OPTION_USE_MODULE_ERRORS */
+
+
+ /* If FT_ERRORDEF is not defined, we need to define a simple */
+ /* enumeration type. */
+ /* */
+#ifndef FT_ERRORDEF
+
+#define FT_ERRORDEF( e, v, s ) e = v,
+#define FT_ERROR_START_LIST enum {
+#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
+
+#ifdef __cplusplus
+#define FT_NEED_EXTERN_C
+ extern "C" {
+#endif
+
+#endif /* !FT_ERRORDEF */
+
+
+ /* this macro is used to define an error */
+#define FT_ERRORDEF_( e, v, s ) \
+ FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
+
+ /* this is only used for <module>_Err_Ok, which must be 0! */
+#define FT_NOERRORDEF_( e, v, s ) \
+ FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
+
+
+#ifdef FT_ERROR_START_LIST
+ FT_ERROR_START_LIST
+#endif
+
+
+ /* now include the error codes */
+#include FT_ERROR_DEFINITIONS_H
+
+
+#ifdef FT_ERROR_END_LIST
+ FT_ERROR_END_LIST
+#endif
+
+
+ /*******************************************************************/
+ /*******************************************************************/
+ /***** *****/
+ /***** SIMPLE CLEANUP *****/
+ /***** *****/
+ /*******************************************************************/
+ /*******************************************************************/
+
+#ifdef FT_NEED_EXTERN_C
+ }
+#endif
+
+#undef FT_ERROR_START_LIST
+#undef FT_ERROR_END_LIST
+
+#undef FT_ERRORDEF
+#undef FT_ERRORDEF_
+#undef FT_NOERRORDEF_
+
+#undef FT_NEED_EXTERN_C
+#undef FT_ERR_BASE
+
+ /* FT_ERR_PREFIX is needed internally */
+#ifndef FT2_BUILD_LIBRARY
+#undef FT_ERR_PREFIX
+#endif
+
+#endif /* __FTERRORS_H__ */
+
+
+/* END */
diff --git a/freetype/include/freetype/ftfntfmt.h b/freetype/include/freetype/ftfntfmt.h
new file mode 100644
index 0000000..1f8ff28
--- /dev/null
+++ b/freetype/include/freetype/ftfntfmt.h
@@ -0,0 +1,92 @@
+/***************************************************************************/
+/* */
+/* ftfntfmt.h */
+/* */
+/* Support functions for font formats. */
+/* */
+/* Copyright 2002-2015 by */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+
+#ifndef __FTFNTFMT_H__
+#define __FTFNTFMT_H__
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* font_formats */
+ /* */
+ /* <Title> */
+ /* Font Formats */
+ /* */
+ /* <Abstract> */
+ /* Getting the font format. */
+ /* */
+ /* <Description> */
+ /* The single function in this section can be used to get the font */
+ /* format. Note that this information is not needed normally; */
+ /* however, there are special cases (like in PDF devices) where it is */
+ /* important to differentiate, in spite of FreeType's uniform API. */
+ /* */
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Get_Font_Format */
+ /* */
+ /* <Description> */
+ /* Return a string describing the format of a given face. Possible */
+ /* values are `TrueType', `Type~1', `BDF', `PCF', `Type~42', */
+ /* `CID~Type~1', `CFF', `PFR', and `Windows~FNT'. */
+ /* */
+ /* The return value is suitable to be used as an X11 FONT_PROPERTY. */
+ /* */
+ /* <Input> */
+ /* face :: */
+ /* Input face handle. */
+ /* */
+ /* <Return> */
+ /* Font format string. NULL in case of error. */
+ /* */
+ /* <Note> */
+ /* A deprecated name for the same function is */
+ /* `FT_Get_X11_Font_Format'. */
+ /* */
+ FT_EXPORT( const char* )
+ FT_Get_Font_Format( FT_Face face );
+
+
+ /* deprecated */
+ FT_EXPORT( const char* )
+ FT_Get_X11_Font_Format( FT_Face face );
+
+
+ /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTFNTFMT_H__ */
diff --git a/freetype/include/freetype/ftgasp.h b/freetype/include/freetype/ftgasp.h
new file mode 100644
index 0000000..9a9b632
--- /dev/null
+++ b/freetype/include/freetype/ftgasp.h
@@ -0,0 +1,129 @@
+/***************************************************************************/
+/* */
+/* ftgasp.h */
+/* */
+/* Access of TrueType's `gasp' table (specification). */
+/* */
+/* Copyright 2007-2015 by */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+
+#ifndef _FT_GASP_H_
+#define _FT_GASP_H_
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+ /***************************************************************************
+ *
+ * @section:
+ * gasp_table
+ *
+ * @title:
+ * Gasp Table
+ *
+ * @abstract:
+ * Retrieving TrueType `gasp' table entries.
+ *
+ * @description:
+ * The function @FT_Get_Gasp can be used to query a TrueType or OpenType
+ * font for specific entries in its `gasp' table, if any. This is
+ * mainly useful when implementing native TrueType hinting with the
+ * bytecode interpreter to duplicate the Windows text rendering results.
+ */
+
+ /*************************************************************************
+ *
+ * @enum:
+ * FT_GASP_XXX
+ *
+ * @description:
+ * A list of values and/or bit-flags returned by the @FT_Get_Gasp
+ * function.
+ *
+ * @values:
+ * FT_GASP_NO_TABLE ::
+ * This special value means that there is no GASP table in this face.
+ * It is up to the client to decide what to do.
+ *
+ * FT_GASP_DO_GRIDFIT ::
+ * Grid-fitting and hinting should be performed at the specified ppem.
+ * This *really* means TrueType bytecode interpretation. If this bit
+ * is not set, no hinting gets applied.
+ *
+ * FT_GASP_DO_GRAY ::
+ * Anti-aliased rendering should be performed at the specified ppem.
+ * If not set, do monochrome rendering.
+ *
+ * FT_GASP_SYMMETRIC_SMOOTHING ::
+ * If set, smoothing along multiple axes must be used with ClearType.
+ *
+ * FT_GASP_SYMMETRIC_GRIDFIT ::
+ * Grid-fitting must be used with ClearType's symmetric smoothing.
+ *
+ * @note:
+ * The bit-flags `FT_GASP_DO_GRIDFIT' and `FT_GASP_DO_GRAY' are to be
+ * used for standard font rasterization only. Independently of that,
+ * `FT_GASP_SYMMETRIC_SMOOTHING' and `FT_GASP_SYMMETRIC_GRIDFIT' are to
+ * be used if ClearType is enabled (and `FT_GASP_DO_GRIDFIT' and
+ * `FT_GASP_DO_GRAY' are consequently ignored).
+ *
+ * `ClearType' is Microsoft's implementation of LCD rendering, partly
+ * protected by patents.
+ *
+ * @since:
+ * 2.3.0
+ */
+#define FT_GASP_NO_TABLE -1
+#define FT_GASP_DO_GRIDFIT 0x01
+#define FT_GASP_DO_GRAY 0x02
+#define FT_GASP_SYMMETRIC_SMOOTHING 0x08
+#define FT_GASP_SYMMETRIC_GRIDFIT 0x10
+
+
+ /*************************************************************************
+ *
+ * @func:
+ * FT_Get_Gasp
+ *
+ * @description:
+ * Read the `gasp' table from a TrueType or OpenType font file and
+ * return the entry corresponding to a given character pixel size.
+ *
+ * @input:
+ * face :: The source face handle.
+ * ppem :: The vertical character pixel size.
+ *
+ * @return:
+ * Bit flags (see @FT_GASP_XXX), or @FT_GASP_NO_TABLE if there is no
+ * `gasp' table in the face.
+ *
+ * @since:
+ * 2.3.0
+ */
+ FT_EXPORT( FT_Int )
+ FT_Get_Gasp( FT_Face face,
+ FT_UInt ppem );
+
+ /* */
+
+
+#endif /* _FT_GASP_H_ */
+
+
+/* END */
diff --git a/freetype/include/freetype/ftglyph.h b/freetype/include/freetype/ftglyph.h
new file mode 100644
index 0000000..803ad39
--- /dev/null
+++ b/freetype/include/freetype/ftglyph.h
@@ -0,0 +1,605 @@
+/***************************************************************************/
+/* */
+/* ftglyph.h */
+/* */
+/* FreeType convenience functions to handle glyphs (specification). */
+/* */
+/* Copyright 1996-2015 by */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* This file contains the definition of several convenience functions */
+ /* that can be used by client applications to easily retrieve glyph */
+ /* bitmaps and outlines from a given face. */
+ /* */
+ /* These functions should be optional if you are writing a font server */
+ /* or text layout engine on top of FreeType. However, they are pretty */
+ /* handy for many other simple uses of the library. */
+ /* */
+ /*************************************************************************/
+
+
+#ifndef __FTGLYPH_H__
+#define __FTGLYPH_H__
+
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* glyph_management */
+ /* */
+ /* <Title> */
+ /* Glyph Management */
+ /* */
+ /* <Abstract> */
+ /* Generic interface to manage individual glyph data. */
+ /* */
+ /* <Description> */
+ /* This section contains definitions used to manage glyph data */
+ /* through generic FT_Glyph objects. Each of them can contain a */
+ /* bitmap, a vector outline, or even images in other formats. */
+ /* */
+ /*************************************************************************/
+
+
+ /* forward declaration to a private type */
+ typedef struct FT_Glyph_Class_ FT_Glyph_Class;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_Glyph */
+ /* */
+ /* <Description> */
+ /* Handle to an object used to model generic glyph images. It is a */
+ /* pointer to the @FT_GlyphRec structure and can contain a glyph */
+ /* bitmap or pointer. */
+ /* */
+ /* <Note> */
+ /* Glyph objects are not owned by the library. You must thus release */
+ /* them manually (through @FT_Done_Glyph) _before_ calling */
+ /* @FT_Done_FreeType. */
+ /* */
+ typedef struct FT_GlyphRec_* FT_Glyph;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Struct> */
+ /* FT_GlyphRec */
+ /* */
+ /* <Description> */
+ /* The root glyph structure contains a given glyph image plus its */
+ /* advance width in 16.16 fixed-point format. */
+ /* */
+ /* <Fields> */
+ /* library :: A handle to the FreeType library object. */
+ /* */
+ /* clazz :: A pointer to the glyph's class. Private. */
+ /* */
+ /* format :: The format of the glyph's image. */
+ /* */
+ /* advance :: A 16.16 vector that gives the glyph's advance width. */
+ /* */
+ typedef struct FT_GlyphRec_
+ {
+ FT_Library library;
+ const FT_Glyph_Class* clazz;
+ FT_Glyph_Format format;
+ FT_Vector advance;
+
+ } FT_GlyphRec;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_BitmapGlyph */
+ /* */
+ /* <Description> */
+ /* A handle to an object used to model a bitmap glyph image. This is */
+ /* a sub-class of @FT_Glyph, and a pointer to @FT_BitmapGlyphRec. */
+ /* */
+ typedef struct FT_BitmapGlyphRec_* FT_BitmapGlyph;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Struct> */
+ /* FT_BitmapGlyphRec */
+ /* */
+ /* <Description> */
+ /* A structure used for bitmap glyph images. This really is a */
+ /* `sub-class' of @FT_GlyphRec. */
+ /* */
+ /* <Fields> */
+ /* root :: The root @FT_Glyph fields. */
+ /* */
+ /* left :: The left-side bearing, i.e., the horizontal distance */
+ /* from the current pen position to the left border of the */
+ /* glyph bitmap. */
+ /* */
+ /* top :: The top-side bearing, i.e., the vertical distance from */
+ /* the current pen position to the top border of the glyph */
+ /* bitmap. This distance is positive for upwards~y! */
+ /* */
+ /* bitmap :: A descriptor for the bitmap. */
+ /* */
+ /* <Note> */
+ /* You can typecast an @FT_Glyph to @FT_BitmapGlyph if you have */
+ /* `glyph->format == FT_GLYPH_FORMAT_BITMAP'. This lets you access */
+ /* the bitmap's contents easily. */
+ /* */
+ /* The corresponding pixel buffer is always owned by @FT_BitmapGlyph */
+ /* and is thus created and destroyed with it. */
+ /* */
+ typedef struct FT_BitmapGlyphRec_
+ {
+ FT_GlyphRec root;
+ FT_Int left;
+ FT_Int top;
+ FT_Bitmap bitmap;
+
+ } FT_BitmapGlyphRec;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_OutlineGlyph */
+ /* */
+ /* <Description> */
+ /* A handle to an object used to model an outline glyph image. This */
+ /* is a sub-class of @FT_Glyph, and a pointer to @FT_OutlineGlyphRec. */
+ /* */
+ typedef struct FT_OutlineGlyphRec_* FT_OutlineGlyph;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Struct> */
+ /* FT_OutlineGlyphRec */
+ /* */
+ /* <Description> */
+ /* A structure used for outline (vectorial) glyph images. This */
+ /* really is a `sub-class' of @FT_GlyphRec. */
+ /* */
+ /* <Fields> */
+ /* root :: The root @FT_Glyph fields. */
+ /* */
+ /* outline :: A descriptor for the outline. */
+ /* */
+ /* <Note> */
+ /* You can typecast an @FT_Glyph to @FT_OutlineGlyph if you have */
+ /* `glyph->format == FT_GLYPH_FORMAT_OUTLINE'. This lets you access */
+ /* the outline's content easily. */
+ /* */
+ /* As the outline is extracted from a glyph slot, its coordinates are */
+ /* expressed normally in 26.6 pixels, unless the flag */
+ /* @FT_LOAD_NO_SCALE was used in @FT_Load_Glyph() or @FT_Load_Char(). */
+ /* */
+ /* The outline's tables are always owned by the object and are */
+ /* destroyed with it. */
+ /* */
+ typedef struct FT_OutlineGlyphRec_
+ {
+ FT_GlyphRec root;
+ FT_Outline outline;
+
+ } FT_OutlineGlyphRec;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Get_Glyph */
+ /* */
+ /* <Description> */
+ /* A function used to extract a glyph image from a slot. Note that */
+ /* the created @FT_Glyph object must be released with @FT_Done_Glyph. */
+ /* */
+ /* <Input> */
+ /* slot :: A handle to the source glyph slot. */
+ /* */
+ /* <Output> */
+ /* aglyph :: A handle to the glyph object. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Get_Glyph( FT_GlyphSlot slot,
+ FT_Glyph *aglyph );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Glyph_Copy */
+ /* */
+ /* <Description> */
+ /* A function used to copy a glyph image. Note that the created */
+ /* @FT_Glyph object must be released with @FT_Done_Glyph. */
+ /* */
+ /* <Input> */
+ /* source :: A handle to the source glyph object. */
+ /* */
+ /* <Output> */
+ /* target :: A handle to the target glyph object. 0~in case of */
+ /* error. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Glyph_Copy( FT_Glyph source,
+ FT_Glyph *target );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Glyph_Transform */
+ /* */
+ /* <Description> */
+ /* Transform a glyph image if its format is scalable. */
+ /* */
+ /* <InOut> */
+ /* glyph :: A handle to the target glyph object. */
+ /* */
+ /* <Input> */
+ /* matrix :: A pointer to a 2x2 matrix to apply. */
+ /* */
+ /* delta :: A pointer to a 2d vector to apply. Coordinates are */
+ /* expressed in 1/64th of a pixel. */
+ /* */
+ /* <Return> */
+ /* FreeType error code (if not 0, the glyph format is not scalable). */
+ /* */
+ /* <Note> */
+ /* The 2x2 transformation matrix is also applied to the glyph's */
+ /* advance vector. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Glyph_Transform( FT_Glyph glyph,
+ FT_Matrix* matrix,
+ FT_Vector* delta );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Enum> */
+ /* FT_Glyph_BBox_Mode */
+ /* */
+ /* <Description> */
+ /* The mode how the values of @FT_Glyph_Get_CBox are returned. */
+ /* */
+ /* <Values> */
+ /* FT_GLYPH_BBOX_UNSCALED :: */
+ /* Return unscaled font units. */
+ /* */
+ /* FT_GLYPH_BBOX_SUBPIXELS :: */
+ /* Return unfitted 26.6 coordinates. */
+ /* */
+ /* FT_GLYPH_BBOX_GRIDFIT :: */
+ /* Return grid-fitted 26.6 coordinates. */
+ /* */
+ /* FT_GLYPH_BBOX_TRUNCATE :: */
+ /* Return coordinates in integer pixels. */
+ /* */
+ /* FT_GLYPH_BBOX_PIXELS :: */
+ /* Return grid-fitted pixel coordinates. */
+ /* */
+ typedef enum FT_Glyph_BBox_Mode_
+ {
+ FT_GLYPH_BBOX_UNSCALED = 0,
+ FT_GLYPH_BBOX_SUBPIXELS = 0,
+ FT_GLYPH_BBOX_GRIDFIT = 1,
+ FT_GLYPH_BBOX_TRUNCATE = 2,
+ FT_GLYPH_BBOX_PIXELS = 3
+
+ } FT_Glyph_BBox_Mode;
+
+
+ /* these constants are deprecated; use the corresponding */
+ /* `FT_Glyph_BBox_Mode' values instead */
+#define ft_glyph_bbox_unscaled FT_GLYPH_BBOX_UNSCALED
+#define ft_glyph_bbox_subpixels FT_GLYPH_BBOX_SUBPIXELS
+#define ft_glyph_bbox_gridfit FT_GLYPH_BBOX_GRIDFIT
+#define ft_glyph_bbox_truncate FT_GLYPH_BBOX_TRUNCATE
+#define ft_glyph_bbox_pixels FT_GLYPH_BBOX_PIXELS
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Glyph_Get_CBox */
+ /* */
+ /* <Description> */
+ /* Return a glyph's `control box'. The control box encloses all the */
+ /* outline's points, including Bézier control points. Though it */
+ /* coincides with the exact bounding box for most glyphs, it can be */
+ /* slightly larger in some situations (like when rotating an outline */
+ /* that contains Bézier outside arcs). */
+ /* */
+ /* Computing the control box is very fast, while getting the bounding */
+ /* box can take much more time as it needs to walk over all segments */
+ /* and arcs in the outline. To get the latter, you can use the */
+ /* `ftbbox' component, which is dedicated to this single task. */
+ /* */
+ /* <Input> */
+ /* glyph :: A handle to the source glyph object. */
+ /* */
+ /* mode :: The mode that indicates how to interpret the returned */
+ /* bounding box values. */
+ /* */
+ /* <Output> */
+ /* acbox :: The glyph coordinate bounding box. Coordinates are */
+ /* expressed in 1/64th of pixels if it is grid-fitted. */
+ /* */
+ /* <Note> */
+ /* Coordinates are relative to the glyph origin, using the y~upwards */
+ /* convention. */
+ /* */
+ /* If the glyph has been loaded with @FT_LOAD_NO_SCALE, `bbox_mode' */
+ /* must be set to @FT_GLYPH_BBOX_UNSCALED to get unscaled font */
+ /* units in 26.6 pixel format. The value @FT_GLYPH_BBOX_SUBPIXELS */
+ /* is another name for this constant. */
+ /* */
+ /* If the font is tricky and the glyph has been loaded with */
+ /* @FT_LOAD_NO_SCALE, the resulting CBox is meaningless. To get */
+ /* reasonable values for the CBox it is necessary to load the glyph */
+ /* at a large ppem value (so that the hinting instructions can */
+ /* properly shift and scale the subglyphs), then extracting the CBox, */
+ /* which can be eventually converted back to font units. */
+ /* */
+ /* Note that the maximum coordinates are exclusive, which means that */
+ /* one can compute the width and height of the glyph image (be it in */
+ /* integer or 26.6 pixels) as: */
+ /* */
+ /* { */
+ /* width = bbox.xMax - bbox.xMin; */
+ /* height = bbox.yMax - bbox.yMin; */
+ /* } */
+ /* */
+ /* Note also that for 26.6 coordinates, if `bbox_mode' is set to */
+ /* @FT_GLYPH_BBOX_GRIDFIT, the coordinates will also be grid-fitted, */
+ /* which corresponds to: */
+ /* */
+ /* { */
+ /* bbox.xMin = FLOOR(bbox.xMin); */
+ /* bbox.yMin = FLOOR(bbox.yMin); */
+ /* bbox.xMax = CEILING(bbox.xMax); */
+ /* bbox.yMax = CEILING(bbox.yMax); */
+ /* } */
+ /* */
+ /* To get the bbox in pixel coordinates, set `bbox_mode' to */
+ /* @FT_GLYPH_BBOX_TRUNCATE. */
+ /* */
+ /* To get the bbox in grid-fitted pixel coordinates, set `bbox_mode' */
+ /* to @FT_GLYPH_BBOX_PIXELS. */
+ /* */
+ FT_EXPORT( void )
+ FT_Glyph_Get_CBox( FT_Glyph glyph,
+ FT_UInt bbox_mode,
+ FT_BBox *acbox );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Glyph_To_Bitmap */
+ /* */
+ /* <Description> */
+ /* Convert a given glyph object to a bitmap glyph object. */
+ /* */
+ /* <InOut> */
+ /* the_glyph :: A pointer to a handle to the target glyph. */
+ /* */
+ /* <Input> */
+ /* render_mode :: An enumeration that describes how the data is */
+ /* rendered. */
+ /* */
+ /* origin :: A pointer to a vector used to translate the glyph */
+ /* image before rendering. Can be~0 (if no */
+ /* translation). The origin is expressed in */
+ /* 26.6 pixels. */
+ /* */
+ /* destroy :: A boolean that indicates that the original glyph */
+ /* image should be destroyed by this function. It is */
+ /* never destroyed in case of error. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ /* <Note> */
+ /* This function does nothing if the glyph format isn't scalable. */
+ /* */
+ /* The glyph image is translated with the `origin' vector before */
+ /* rendering. */
+ /* */
+ /* The first parameter is a pointer to an @FT_Glyph handle, that will */
+ /* be _replaced_ by this function (with newly allocated data). */
+ /* Typically, you would use (omitting error handling): */
+ /* */
+ /* */
+ /* { */
+ /* FT_Glyph glyph; */
+ /* FT_BitmapGlyph glyph_bitmap; */
+ /* */
+ /* */
+ /* // load glyph */
+ /* error = FT_Load_Char( face, glyph_index, FT_LOAD_DEFAUT ); */
+ /* */
+ /* // extract glyph image */
+ /* error = FT_Get_Glyph( face->glyph, &glyph ); */
+ /* */
+ /* // convert to a bitmap (default render mode + destroying old) */
+ /* if ( glyph->format != FT_GLYPH_FORMAT_BITMAP ) */
+ /* { */
+ /* error = FT_Glyph_To_Bitmap( &glyph, FT_RENDER_MODE_NORMAL, */
+ /* 0, 1 ); */
+ /* if ( error ) // `glyph' unchanged */
+ /* ... */
+ /* } */
+ /* */
+ /* // access bitmap content by typecasting */
+ /* glyph_bitmap = (FT_BitmapGlyph)glyph; */
+ /* */
+ /* // do funny stuff with it, like blitting/drawing */
+ /* ... */
+ /* */
+ /* // discard glyph image (bitmap or not) */
+ /* FT_Done_Glyph( glyph ); */
+ /* } */
+ /* */
+ /* */
+ /* Here another example, again without error handling: */
+ /* */
+ /* */
+ /* { */
+ /* FT_Glyph glyphs[MAX_GLYPHS] */
+ /* */
+ /* */
+ /* ... */
+ /* */
+ /* for ( idx = 0; i < MAX_GLYPHS; i++ ) */
+ /* error = FT_Load_Glyph( face, idx, FT_LOAD_DEFAULT ) || */
+ /* FT_Get_Glyph ( face->glyph, &glyph[idx] ); */
+ /* */
+ /* ... */
+ /* */
+ /* for ( idx = 0; i < MAX_GLYPHS; i++ ) */
+ /* { */
+ /* FT_Glyph bitmap = glyphs[idx]; */
+ /* */
+ /* */
+ /* ... */
+ /* */
+ /* // after this call, `bitmap' no longer points into */
+ /* // the `glyphs' array (and the old value isn't destroyed) */
+ /* FT_Glyph_To_Bitmap( &bitmap, FT_RENDER_MODE_MONO, 0, 0 ); */
+ /* */
+ /* ... */
+ /* */
+ /* FT_Done_Glyph( bitmap ); */
+ /* } */
+ /* */
+ /* ... */
+ /* */
+ /* for ( idx = 0; i < MAX_GLYPHS; i++ ) */
+ /* FT_Done_Glyph( glyphs[idx] ); */
+ /* } */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Glyph_To_Bitmap( FT_Glyph* the_glyph,
+ FT_Render_Mode render_mode,
+ FT_Vector* origin,
+ FT_Bool destroy );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Done_Glyph */
+ /* */
+ /* <Description> */
+ /* Destroy a given glyph. */
+ /* */
+ /* <Input> */
+ /* glyph :: A handle to the target glyph object. */
+ /* */
+ FT_EXPORT( void )
+ FT_Done_Glyph( FT_Glyph glyph );
+
+ /* */
+
+
+ /* other helpful functions */
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* computations */
+ /* */
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Matrix_Multiply */
+ /* */
+ /* <Description> */
+ /* Perform the matrix operation `b = a*b'. */
+ /* */
+ /* <Input> */
+ /* a :: A pointer to matrix `a'. */
+ /* */
+ /* <InOut> */
+ /* b :: A pointer to matrix `b'. */
+ /* */
+ /* <Note> */
+ /* The result is undefined if either `a' or `b' is zero. */
+ /* */
+ FT_EXPORT( void )
+ FT_Matrix_Multiply( const FT_Matrix* a,
+ FT_Matrix* b );
+
+
+ /*************************************************************************/
+ /* */
+ /* <Function> */
+ /* FT_Matrix_Invert */
+ /* */
+ /* <Description> */
+ /* Invert a 2x2 matrix. Return an error if it can't be inverted. */
+ /* */
+ /* <InOut> */
+ /* matrix :: A pointer to the target matrix. Remains untouched in */
+ /* case of error. */
+ /* */
+ /* <Return> */
+ /* FreeType error code. 0~means success. */
+ /* */
+ FT_EXPORT( FT_Error )
+ FT_Matrix_Invert( FT_Matrix* matrix );
+
+ /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTGLYPH_H__ */
+
+
+/* END */
+
+
+/* Local Variables: */
+/* coding: utf-8 */
+/* End: */
diff --git a/freetype/include/freetype/ftgxval.h b/freetype/include/freetype/ftgxval.h
new file mode 100644
index 0000000..0e9ac1d
--- /dev/null
+++ b/freetype/include/freetype/ftgxval.h
@@ -0,0 +1,357 @@
+/***************************************************************************/
+/* */
+/* ftgxval.h */
+/* */
+/* FreeType API for validating TrueTypeGX/AAT tables (specification). */
+/* */
+/* Copyright 2004-2015 by */
+/* Masatake YAMATO, Redhat K.K, */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+/***************************************************************************/
+/* */
+/* gxvalid is derived from both gxlayout module and otvalid module. */
+/* Development of gxlayout is supported by the Information-technology */
+/* Promotion Agency(IPA), Japan. */
+/* */
+/***************************************************************************/
+
+
+#ifndef __FTGXVAL_H__
+#define __FTGXVAL_H__
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* gx_validation */
+ /* */
+ /* <Title> */
+ /* TrueTypeGX/AAT Validation */
+ /* */
+ /* <Abstract> */
+ /* An API to validate TrueTypeGX/AAT tables. */
+ /* */
+ /* <Description> */
+ /* This section contains the declaration of functions to validate */
+ /* some TrueTypeGX tables (feat, mort, morx, bsln, just, kern, opbd, */
+ /* trak, prop, lcar). */
+ /* */
+ /* <Order> */
+ /* FT_TrueTypeGX_Validate */
+ /* FT_TrueTypeGX_Free */
+ /* */
+ /* FT_ClassicKern_Validate */
+ /* FT_ClassicKern_Free */
+ /* */
+ /* FT_VALIDATE_GX_LENGTH */
+ /* FT_VALIDATE_GXXXX */
+ /* FT_VALIDATE_CKERNXXX */
+ /* */
+ /*************************************************************************/
+
+ /*************************************************************************/
+ /* */
+ /* */
+ /* Warning: Use FT_VALIDATE_XXX to validate a table. */
+ /* Following definitions are for gxvalid developers. */
+ /* */
+ /* */
+ /*************************************************************************/
+
+#define FT_VALIDATE_feat_INDEX 0
+#define FT_VALIDATE_mort_INDEX 1
+#define FT_VALIDATE_morx_INDEX 2
+#define FT_VALIDATE_bsln_INDEX 3
+#define FT_VALIDATE_just_INDEX 4
+#define FT_VALIDATE_kern_INDEX 5
+#define FT_VALIDATE_opbd_INDEX 6
+#define FT_VALIDATE_trak_INDEX 7
+#define FT_VALIDATE_prop_INDEX 8
+#define FT_VALIDATE_lcar_INDEX 9
+#define FT_VALIDATE_GX_LAST_INDEX FT_VALIDATE_lcar_INDEX
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_VALIDATE_GX_LENGTH
+ *
+ * @description:
+ * The number of tables checked in this module. Use it as a parameter
+ * for the `table-length' argument of function @FT_TrueTypeGX_Validate.
+ */
+#define FT_VALIDATE_GX_LENGTH (FT_VALIDATE_GX_LAST_INDEX + 1)
+
+ /* */
+
+ /* Up to 0x1000 is used by otvalid.
+ Ox2xxx is reserved for feature OT extension. */
+#define FT_VALIDATE_GX_START 0x4000
+#define FT_VALIDATE_GX_BITFIELD( tag ) \
+ ( FT_VALIDATE_GX_START << FT_VALIDATE_##tag##_INDEX )
+
+
+ /**********************************************************************
+ *
+ * @enum:
+ * FT_VALIDATE_GXXXX
+ *
+ * @description:
+ * A list of bit-field constants used with @FT_TrueTypeGX_Validate to
+ * indicate which TrueTypeGX/AAT Type tables should be validated.
+ *
+ * @values:
+ * FT_VALIDATE_feat ::
+ * Validate `feat' table.
+ *
+ * FT_VALIDATE_mort ::
+ * Validate `mort' table.
+ *
+ * FT_VALIDATE_morx ::
+ * Validate `morx' table.
+ *
+ * FT_VALIDATE_bsln ::
+ * Validate `bsln' table.
+ *
+ * FT_VALIDATE_just ::
+ * Validate `just' table.
+ *
+ * FT_VALIDATE_kern ::
+ * Validate `kern' table.
+ *
+ * FT_VALIDATE_opbd ::
+ * Validate `opbd' table.
+ *
+ * FT_VALIDATE_trak ::
+ * Validate `trak' table.
+ *
+ * FT_VALIDATE_prop ::
+ * Validate `prop' table.
+ *
+ * FT_VALIDATE_lcar ::
+ * Validate `lcar' table.
+ *
+ * FT_VALIDATE_GX ::
+ * Validate all TrueTypeGX tables (feat, mort, morx, bsln, just, kern,
+ * opbd, trak, prop and lcar).
+ *
+ */
+
+#define FT_VALIDATE_feat FT_VALIDATE_GX_BITFIELD( feat )
+#define FT_VALIDATE_mort FT_VALIDATE_GX_BITFIELD( mort )
+#define FT_VALIDATE_morx FT_VALIDATE_GX_BITFIELD( morx )
+#define FT_VALIDATE_bsln FT_VALIDATE_GX_BITFIELD( bsln )
+#define FT_VALIDATE_just FT_VALIDATE_GX_BITFIELD( just )
+#define FT_VALIDATE_kern FT_VALIDATE_GX_BITFIELD( kern )
+#define FT_VALIDATE_opbd FT_VALIDATE_GX_BITFIELD( opbd )
+#define FT_VALIDATE_trak FT_VALIDATE_GX_BITFIELD( trak )
+#define FT_VALIDATE_prop FT_VALIDATE_GX_BITFIELD( prop )
+#define FT_VALIDATE_lcar FT_VALIDATE_GX_BITFIELD( lcar )
+
+#define FT_VALIDATE_GX ( FT_VALIDATE_feat | \
+ FT_VALIDATE_mort | \
+ FT_VALIDATE_morx | \
+ FT_VALIDATE_bsln | \
+ FT_VALIDATE_just | \
+ FT_VALIDATE_kern | \
+ FT_VALIDATE_opbd | \
+ FT_VALIDATE_trak | \
+ FT_VALIDATE_prop | \
+ FT_VALIDATE_lcar )
+
+
+ /**********************************************************************
+ *
+ * @function:
+ * FT_TrueTypeGX_Validate
+ *
+ * @description:
+ * Validate various TrueTypeGX tables to assure that all offsets and
+ * indices are valid. The idea is that a higher-level library that
+ * actually does the text layout can access those tables without
+ * error checking (which can be quite time consuming).
+ *
+ * @input:
+ * face ::
+ * A handle to the input face.
+ *
+ * validation_flags ::
+ * A bit field that specifies the tables to be validated. See
+ * @FT_VALIDATE_GXXXX for possible values.
+ *
+ * table_length ::
+ * The size of the `tables' array. Normally, @FT_VALIDATE_GX_LENGTH
+ * should be passed.
+ *
+ * @output:
+ * tables ::
+ * The array where all validated sfnt tables are stored.
+ * The array itself must be allocated by a client.
+ *
+ * @return:
+ * FreeType error code. 0~means success.
+ *
+ * @note:
+ * This function only works with TrueTypeGX fonts, returning an error
+ * otherwise.
+ *
+ * After use, the application should deallocate the buffers pointed to by
+ * each `tables' element, by calling @FT_TrueTypeGX_Free. A NULL value
+ * indicates that the table either doesn't exist in the font, the
+ * application hasn't asked for validation, or the validator doesn't have
+ * the ability to validate the sfnt table.
+ */
+ FT_EXPORT( FT_Error )
+ FT_TrueTypeGX_Validate( FT_Face face,
+ FT_UInt validation_flags,
+ FT_Bytes tables[FT_VALIDATE_GX_LENGTH],
+ FT_UInt table_length );
+
+
+ /**********************************************************************
+ *
+ * @function:
+ * FT_TrueTypeGX_Free
+ *
+ * @description:
+ * Free the buffer allocated by TrueTypeGX validator.
+ *
+ * @input:
+ * face ::
+ * A handle to the input face.
+ *
+ * table ::
+ * The pointer to the buffer allocated by
+ * @FT_TrueTypeGX_Validate.
+ *
+ * @note:
+ * This function must be used to free the buffer allocated by
+ * @FT_TrueTypeGX_Validate only.
+ */
+ FT_EXPORT( void )
+ FT_TrueTypeGX_Free( FT_Face face,
+ FT_Bytes table );
+
+
+ /**********************************************************************
+ *
+ * @enum:
+ * FT_VALIDATE_CKERNXXX
+ *
+ * @description:
+ * A list of bit-field constants used with @FT_ClassicKern_Validate
+ * to indicate the classic kern dialect or dialects. If the selected
+ * type doesn't fit, @FT_ClassicKern_Validate regards the table as
+ * invalid.
+ *
+ * @values:
+ * FT_VALIDATE_MS ::
+ * Handle the `kern' table as a classic Microsoft kern table.
+ *
+ * FT_VALIDATE_APPLE ::
+ * Handle the `kern' table as a classic Apple kern table.
+ *
+ * FT_VALIDATE_CKERN ::
+ * Handle the `kern' as either classic Apple or Microsoft kern table.
+ */
+#define FT_VALIDATE_MS ( FT_VALIDATE_GX_START << 0 )
+#define FT_VALIDATE_APPLE ( FT_VALIDATE_GX_START << 1 )
+
+#define FT_VALIDATE_CKERN ( FT_VALIDATE_MS | FT_VALIDATE_APPLE )
+
+
+ /**********************************************************************
+ *
+ * @function:
+ * FT_ClassicKern_Validate
+ *
+ * @description:
+ * Validate classic (16-bit format) kern table to assure that the offsets
+ * and indices are valid. The idea is that a higher-level library that
+ * actually does the text layout can access those tables without error
+ * checking (which can be quite time consuming).
+ *
+ * The `kern' table validator in @FT_TrueTypeGX_Validate deals with both
+ * the new 32-bit format and the classic 16-bit format, while
+ * FT_ClassicKern_Validate only supports the classic 16-bit format.
+ *
+ * @input:
+ * face ::
+ * A handle to the input face.
+ *
+ * validation_flags ::
+ * A bit field that specifies the dialect to be validated. See
+ * @FT_VALIDATE_CKERNXXX for possible values.
+ *
+ * @output:
+ * ckern_table ::
+ * A pointer to the kern table.
+ *
+ * @return:
+ * FreeType error code. 0~means success.
+ *
+ * @note:
+ * After use, the application should deallocate the buffers pointed to by
+ * `ckern_table', by calling @FT_ClassicKern_Free. A NULL value
+ * indicates that the table doesn't exist in the font.
+ */
+ FT_EXPORT( FT_Error )
+ FT_ClassicKern_Validate( FT_Face face,
+ FT_UInt validation_flags,
+ FT_Bytes *ckern_table );
+
+
+ /**********************************************************************
+ *
+ * @function:
+ * FT_ClassicKern_Free
+ *
+ * @description:
+ * Free the buffer allocated by classic Kern validator.
+ *
+ * @input:
+ * face ::
+ * A handle to the input face.
+ *
+ * table ::
+ * The pointer to the buffer that is allocated by
+ * @FT_ClassicKern_Validate.
+ *
+ * @note:
+ * This function must be used to free the buffer allocated by
+ * @FT_ClassicKern_Validate only.
+ */
+ FT_EXPORT( void )
+ FT_ClassicKern_Free( FT_Face face,
+ FT_Bytes table );
+
+ /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTGXVAL_H__ */
+
+
+/* END */
diff --git a/freetype/include/freetype/ftgzip.h b/freetype/include/freetype/ftgzip.h
new file mode 100644
index 0000000..b3a532d
--- /dev/null
+++ b/freetype/include/freetype/ftgzip.h
@@ -0,0 +1,148 @@
+/***************************************************************************/
+/* */
+/* ftgzip.h */
+/* */
+/* Gzip-compressed stream support. */
+/* */
+/* Copyright 2002-2015 by */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+
+#ifndef __FTGZIP_H__
+#define __FTGZIP_H__
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* gzip */
+ /* */
+ /* <Title> */
+ /* GZIP Streams */
+ /* */
+ /* <Abstract> */
+ /* Using gzip-compressed font files. */
+ /* */
+ /* <Description> */
+ /* This section contains the declaration of Gzip-specific functions. */
+ /* */
+ /*************************************************************************/
+
+
+ /************************************************************************
+ *
+ * @function:
+ * FT_Stream_OpenGzip
+ *
+ * @description:
+ * Open a new stream to parse gzip-compressed font files. This is
+ * mainly used to support the compressed `*.pcf.gz' fonts that come
+ * with XFree86.
+ *
+ * @input:
+ * stream ::
+ * The target embedding stream.
+ *
+ * source ::
+ * The source stream.
+ *
+ * @return:
+ * FreeType error code. 0~means success.
+ *
+ * @note:
+ * The source stream must be opened _before_ calling this function.
+ *
+ * Calling the internal function `FT_Stream_Close' on the new stream will
+ * *not* call `FT_Stream_Close' on the source stream. None of the stream
+ * objects will be released to the heap.
+ *
+ * The stream implementation is very basic and resets the decompression
+ * process each time seeking backwards is needed within the stream.
+ *
+ * In certain builds of the library, gzip compression recognition is
+ * automatically handled when calling @FT_New_Face or @FT_Open_Face.
+ * This means that if no font driver is capable of handling the raw
+ * compressed file, the library will try to open a gzipped stream from
