dist2/PrepareRelease - nest-cam/4320010/pcre2 - Git at Google

 #/bin/sh

 # Script to prepare the files for building a PCRE2 release. It does some
 # processing of the documentation, detrails files, and creates pcre2.h.generic
 # and config.h.generic (for use by builders who can't run ./configure).

 # You must run this script before runnning "make dist". If its first argument
 # is "doc", it stops after preparing the documentation. There are no other
 # arguments. The script makes use of the following files:

 # 132html     A Perl script that converts a .1 or .3 man page into HTML. It
 #             "knows" the relevant troff constructs that are used in the PCRE2
 #             man pages.

 # CheckMan    A Perl script that checks man pages for typos in the mark up.

 # CleanTxt    A Perl script that cleans up the output of "nroff -man" by
 #             removing backspaces and other redundant text so as to produce
 #             a readable .txt file.

 # Detrail     A Perl script that removes trailing spaces from files.

 # doc/index.html.src
 #             A file that is copied as index.html into the doc/html directory
 #             when the HTML documentation is built. It works like this so that
 #             doc/html can be deleted and re-created from scratch.

 # README & NON-AUTOTOOLS-BUILD
 #             These files are copied into the doc/html directory, with .txt
 #             extensions so that they can by hyperlinked from the HTML
 #             documentation, because some people just go to the HTML without
 #             looking for text files.


 # First, sort out the documentation. Remove pcre2demo.3 first because it won't
 # pass the markup check (it is created below, using markup that none of the
 # other pages use).

 cd doc
 echo Processing documentation

 /bin/rm -f pcre2demo.3

 # Check the remaining man pages

 perl ../CheckMan *.1 *.3
 if [ $? != 0 ] ; then exit 1; fi

 # Make Text form of the documentation. It needs some mangling to make it
 # tidy for online reading. Concatenate all the .3 stuff, but omit the
 # individual function pages.

 cat <<End >pcre2.txt
 -----------------------------------------------------------------------------
 This file contains a concatenation of the PCRE2 man pages, converted to plain
 text format for ease of searching with a text editor, or for use on systems
 that do not have a man page processor. The small individual files that give
 synopses of each function in the library have not been included. Neither has
 the pcre2demo program. There are separate text files for the pcre2grep and
 pcre2test commands.
 -----------------------------------------------------------------------------


 End

 echo "Making pcre2.txt"
 for file in pcre2 pcre2api pcre2build pcre2callout pcre2compat pcre2jit \
             pcre2limits pcre2matching pcre2partial pcre2pattern pcre2perform \
             pcre2posix pcre2sample pcre2serialize pcre2stack pcre2syntax \
             pcre2unicode ; do
   echo "  Processing $file.3"
   nroff -c -man $file.3 >$file.rawtxt
   perl ../CleanTxt <$file.rawtxt >>pcre2.txt
   /bin/rm $file.rawtxt
   echo "------------------------------------------------------------------------------" >>pcre2.txt
   if [ "$file" != "pcre2sample" ] ; then
     echo " " >>pcre2.txt
     echo " " >>pcre2.txt
   fi
 done

 # The three commands
 for file in pcre2test pcre2grep pcre2-config ; do
   echo Making $file.txt
   nroff -c -man $file.1 >$file.rawtxt
   perl ../CleanTxt <$file.rawtxt >$file.txt
   /bin/rm $file.rawtxt
 done


 # Make pcre2demo.3 from the pcre2demo.c source file

 echo "Making pcre2demo.3"
 perl <<"END" >pcre2demo.3
   open(IN, "../src/pcre2demo.c") || die "Failed to open src/pcre2demo.c\n";
   open(OUT, ">pcre2demo.3") || die "Failed to open pcre2demo.3\n";
   print OUT ".\\\" Start example.\n" .
             ".de EX\n" .
             ".  nr mE \\\\n(.f\n" .
             ".  nf\n" .
             ".  nh\n" .
             ".  ft CW\n" .
             "..\n" .
             ".\n" .
             ".\n" .
             ".\\\" End example.\n" .
             ".de EE\n" .
             ".  ft \\\\n(mE\n" .
             ".  fi\n" .
             ".  hy \\\\n(HY\n" .
             "..\n" .
             ".\n" .
             ".EX\n" ;
   while (<IN>)
     {
     s/\\/\\e/g;
     print OUT;
     }
   print OUT ".EE\n";
   close(IN);
   close(OUT);
 END
 if [ $? != 0 ] ; then exit 1; fi


 # Make HTML form of the documentation.

 echo "Making HTML documentation"
 /bin/rm html/*
 cp index.html.src html/index.html
 cp ../README html/README.txt
 cp ../NON-AUTOTOOLS-BUILD html/NON-AUTOTOOLS-BUILD.txt

 for file in *.1 ; do
   base=`basename $file .1`
   echo "  Making $base.html"
   perl ../132html -toc $base <$file >html/$base.html
 done

 # Exclude table of contents for function summaries. It seems that expr
 # forces an anchored regex. Also exclude them for small pages that have
 # only one section.

 for file in *.3 ; do
   base=`basename $file .3`
   toc=-toc
   if [ `expr $base : '.*_'` -ne 0 ] ; then toc="" ; fi
   if [ "$base" = "pcre2sample" ]  || \
      [ "$base" = "pcre2stack" ]   || \
      [ "$base" = "pcre2compat" ]  || \
      [ "$base" = "pcre2limits" ]  || \
      [ "$base" = "pcre2unicode" ] ; then
     toc=""
   fi
   echo "  Making $base.html"
   perl ../132html $toc $base <$file >html/$base.html
   if [ $? != 0 ] ; then exit 1; fi
 done

 # End of documentation processing; stop if only documentation required.

 cd ..
 echo Documentation done
 if [ "$1" = "doc" ] ; then exit; fi

 # These files are detrailed; do not detrail the test data because there may be
 # significant trailing spaces. Do not detrail RunTest.bat, because it has CRLF
 # line endings and the detrail script removes all trailing white space. The
 # configure files are also omitted from the detrailing.

 files="\
   Makefile.am \
   configure.ac \
   README \
   LICENCE \
   COPYING \
   AUTHORS \
   NEWS \
   NON-AUTOTOOLS-BUILD \
   INSTALL \
   132html \
   CleanTxt \
   Detrail \
   ChangeLog \
   CMakeLists.txt \
   RunGrepTest \
   RunTest \
   pcre2-config.in \
   perltest.sh \
   libpcre2-8.pc.in \
   libpcre2-16.pc.in \
   libpcre2-32.pc.in \
   libpcre2-posix.pc.in \
   src/dftables.c \
   src/pcre2.h.in \
   src/pcre2_auto_possess.c \
   src/pcre2_compile.c \
   src/pcre2_config.c \
   src/pcre2_context.c \
   src/pcre2_dfa_match.c \
   src/pcre2_error.c \
   src/pcre2_find_bracket.c \
   src/pcre2_internal.h \
   src/pcre2_intmodedep.h \
   src/pcre2_jit_compile.c \
   src/pcre2_jit_match.c \
   src/pcre2_jit_misc.c \
   src/pcre2_jit_test.c \
   src/pcre2_maketables.c \
   src/pcre2_match.c \
   src/pcre2_match_data.c \
   src/pcre2_newline.c \
   src/pcre2_ord2utf.c \
   src/pcre2_pattern_info.c \
   src/pcre2_printint.c \
   src/pcre2_string_utils.c \
   src/pcre2_study.c \
   src/pcre2_substring.c \
   src/pcre2_tables.c \
   src/pcre2_ucd.c \
   src/pcre2_ucp.h \
   src/pcre2_valid_utf.c \
   src/pcre2_xclass.c \
   src/pcre2demo.c \
   src/pcre2grep.c \
   src/pcre2posix.c \
   src/pcre2posix.h \
   src/pcre2test.c"

 echo Detrailing
 perl ./Detrail $files doc/p* doc/html/*

 echo Done

 #End
	#/bin/sh

	# Script to prepare the files for building a PCRE2 release. It does some
	# processing of the documentation, detrails files, and creates pcre2.h.generic
	# and config.h.generic (for use by builders who can't run ./configure).

	# You must run this script before runnning "make dist". If its first argument
	# is "doc", it stops after preparing the documentation. There are no other
	# arguments. The script makes use of the following files:

	# 132html A Perl script that converts a .1 or .3 man page into HTML. It
	# "knows" the relevant troff constructs that are used in the PCRE2
	# man pages.

	# CheckMan A Perl script that checks man pages for typos in the mark up.

	# CleanTxt A Perl script that cleans up the output of "nroff -man" by
	# removing backspaces and other redundant text so as to produce
	# a readable .txt file.

	# Detrail A Perl script that removes trailing spaces from files.

	# doc/index.html.src
	# A file that is copied as index.html into the doc/html directory
	# when the HTML documentation is built. It works like this so that
	# doc/html can be deleted and re-created from scratch.

	# README & NON-AUTOTOOLS-BUILD
	# These files are copied into the doc/html directory, with .txt
	# extensions so that they can by hyperlinked from the HTML
	# documentation, because some people just go to the HTML without
	# looking for text files.


	# First, sort out the documentation. Remove pcre2demo.3 first because it won't
	# pass the markup check (it is created below, using markup that none of the
	# other pages use).

	cd doc
	echo Processing documentation

	/bin/rm -f pcre2demo.3

	# Check the remaining man pages

	perl ../CheckMan .1 .3
	if [ $? != 0 ] ; then exit 1; fi

	# Make Text form of the documentation. It needs some mangling to make it
	# tidy for online reading. Concatenate all the .3 stuff, but omit the
	# individual function pages.

	cat <<End >pcre2.txt
	-----------------------------------------------------------------------------
	This file contains a concatenation of the PCRE2 man pages, converted to plain
	text format for ease of searching with a text editor, or for use on systems
	that do not have a man page processor. The small individual files that give
	synopses of each function in the library have not been included. Neither has
	the pcre2demo program. There are separate text files for the pcre2grep and
	pcre2test commands.
	-----------------------------------------------------------------------------


	End

	echo "Making pcre2.txt"
	for file in pcre2 pcre2api pcre2build pcre2callout pcre2compat pcre2jit \
	pcre2limits pcre2matching pcre2partial pcre2pattern pcre2perform \
	pcre2posix pcre2sample pcre2serialize pcre2stack pcre2syntax \
	pcre2unicode ; do
	echo " Processing $file.3"
	nroff -c -man $file.3 >$file.rawtxt
	perl ../CleanTxt <$file.rawtxt >>pcre2.txt
	/bin/rm $file.rawtxt
	echo "------------------------------------------------------------------------------" >>pcre2.txt
	if [ "$file" != "pcre2sample" ] ; then
	echo " " >>pcre2.txt
	echo " " >>pcre2.txt
	fi
	done

	# The three commands
	for file in pcre2test pcre2grep pcre2-config ; do
	echo Making $file.txt
	nroff -c -man $file.1 >$file.rawtxt
	perl ../CleanTxt <$file.rawtxt >$file.txt
	/bin/rm $file.rawtxt
	done


	# Make pcre2demo.3 from the pcre2demo.c source file

	echo "Making pcre2demo.3"
	perl <<"END" >pcre2demo.3
	open(IN, "../src/pcre2demo.c") \|\| die "Failed to open src/pcre2demo.c\n";
	open(OUT, ">pcre2demo.3") \|\| die "Failed to open pcre2demo.3\n";
	print OUT ".\\\" Start example.\n" .
	".de EX\n" .
	". nr mE \\\\n(.f\n" .
	". nf\n" .
	". nh\n" .
	". ft CW\n" .
	"..\n" .
	".\n" .
	".\n" .
	".\\\" End example.\n" .
	".de EE\n" .
	". ft \\\\n(mE\n" .
	". fi\n" .
	". hy \\\\n(HY\n" .
	"..\n" .
	".\n" .
	".EX\n" ;
	while (<IN>)
	{
	s/\\/\\e/g;
	print OUT;
	}
	print OUT ".EE\n";
	close(IN);
	close(OUT);
	END
	if [ $? != 0 ] ; then exit 1; fi


	# Make HTML form of the documentation.

	echo "Making HTML documentation"
	/bin/rm html/*
	cp index.html.src html/index.html
	cp ../README html/README.txt
	cp ../NON-AUTOTOOLS-BUILD html/NON-AUTOTOOLS-BUILD.txt

	for file in *.1 ; do
	base=`basename $file .1`
	echo " Making $base.html"
	perl ../132html -toc $base <$file >html/$base.html
	done

	# Exclude table of contents for function summaries. It seems that expr
	# forces an anchored regex. Also exclude them for small pages that have
	# only one section.

	for file in *.3 ; do
	base=`basename $file .3`
	toc=-toc
	if [ `expr $base : '.*_'` -ne 0 ] ; then toc="" ; fi
	if [ "$base" = "pcre2sample" ] \|\| \
	[ "$base" = "pcre2stack" ] \|\| \
	[ "$base" = "pcre2compat" ] \|\| \
	[ "$base" = "pcre2limits" ] \|\| \
	[ "$base" = "pcre2unicode" ] ; then
	toc=""
	fi
	echo " Making $base.html"
	perl ../132html $toc $base <$file >html/$base.html
	if [ $? != 0 ] ; then exit 1; fi
	done

	# End of documentation processing; stop if only documentation required.

	cd ..
	echo Documentation done
	if [ "$1" = "doc" ] ; then exit; fi

	# These files are detrailed; do not detrail the test data because there may be
	# significant trailing spaces. Do not detrail RunTest.bat, because it has CRLF
	# line endings and the detrail script removes all trailing white space. The
	# configure files are also omitted from the detrailing.

	files="\
	Makefile.am \
	configure.ac \
	README \
	LICENCE \
	COPYING \
	AUTHORS \
	NEWS \
	NON-AUTOTOOLS-BUILD \
	INSTALL \
	132html \
	CleanTxt \
	Detrail \
	ChangeLog \
	CMakeLists.txt \
	RunGrepTest \
	RunTest \
	pcre2-config.in \
	perltest.sh \
	libpcre2-8.pc.in \
	libpcre2-16.pc.in \
	libpcre2-32.pc.in \
	libpcre2-posix.pc.in \
	src/dftables.c \
	src/pcre2.h.in \
	src/pcre2_auto_possess.c \
	src/pcre2_compile.c \
	src/pcre2_config.c \
	src/pcre2_context.c \
	src/pcre2_dfa_match.c \
	src/pcre2_error.c \
	src/pcre2_find_bracket.c \
	src/pcre2_internal.h \
	src/pcre2_intmodedep.h \
	src/pcre2_jit_compile.c \
	src/pcre2_jit_match.c \
	src/pcre2_jit_misc.c \
	src/pcre2_jit_test.c \
	src/pcre2_maketables.c \
	src/pcre2_match.c \
	src/pcre2_match_data.c \
	src/pcre2_newline.c \
	src/pcre2_ord2utf.c \
	src/pcre2_pattern_info.c \
	src/pcre2_printint.c \
	src/pcre2_string_utils.c \
	src/pcre2_study.c \
	src/pcre2_substring.c \
	src/pcre2_tables.c \
	src/pcre2_ucd.c \
	src/pcre2_ucp.h \
	src/pcre2_valid_utf.c \
	src/pcre2_xclass.c \
	src/pcre2demo.c \
	src/pcre2grep.c \
	src/pcre2posix.c \
	src/pcre2posix.h \
	src/pcre2test.c"

	echo Detrailing
	perl ./Detrail $files doc/p* doc/html/*

	echo Done

	#End