blob: 7fdc0dc4bbda2065fa51eea519c6971f77483d5b [file] [log] [blame]
<html>
<head>
<title>pcre2syntax specification</title>
</head>
<body bgcolor="#FFFFFF" text="#00005A" link="#0066FF" alink="#3399FF" vlink="#2222BB">
<h1>pcre2syntax man page</h1>
<p>
Return to the <a href="index.html">PCRE2 index page</a>.
</p>
<p>
This page is part of the PCRE2 HTML documentation. It was generated
automatically from the original man page. If there is any nonsense in it,
please consult the man page, in case the conversion went wrong.
<br>
<ul>
<li><a name="TOC1" href="#SEC1">PCRE2 REGULAR EXPRESSION SYNTAX SUMMARY</a>
<li><a name="TOC2" href="#SEC2">QUOTING</a>
<li><a name="TOC3" href="#SEC3">ESCAPED CHARACTERS</a>
<li><a name="TOC4" href="#SEC4">CHARACTER TYPES</a>
<li><a name="TOC5" href="#SEC5">GENERAL CATEGORY PROPERTIES FOR \p and \P</a>
<li><a name="TOC6" href="#SEC6">PCRE2 SPECIAL CATEGORY PROPERTIES FOR \p and \P</a>
<li><a name="TOC7" href="#SEC7">SCRIPT NAMES FOR \p AND \P</a>
<li><a name="TOC8" href="#SEC8">CHARACTER CLASSES</a>
<li><a name="TOC9" href="#SEC9">QUANTIFIERS</a>
<li><a name="TOC10" href="#SEC10">ANCHORS AND SIMPLE ASSERTIONS</a>
<li><a name="TOC11" href="#SEC11">MATCH POINT RESET</a>
<li><a name="TOC12" href="#SEC12">ALTERNATION</a>
<li><a name="TOC13" href="#SEC13">CAPTURING</a>
<li><a name="TOC14" href="#SEC14">ATOMIC GROUPS</a>
<li><a name="TOC15" href="#SEC15">COMMENT</a>
<li><a name="TOC16" href="#SEC16">OPTION SETTING</a>
<li><a name="TOC17" href="#SEC17">NEWLINE CONVENTION</a>
<li><a name="TOC18" href="#SEC18">WHAT \R MATCHES</a>
<li><a name="TOC19" href="#SEC19">LOOKAHEAD AND LOOKBEHIND ASSERTIONS</a>
<li><a name="TOC20" href="#SEC20">BACKREFERENCES</a>
<li><a name="TOC21" href="#SEC21">SUBROUTINE REFERENCES (POSSIBLY RECURSIVE)</a>
<li><a name="TOC22" href="#SEC22">CONDITIONAL PATTERNS</a>
<li><a name="TOC23" href="#SEC23">BACKTRACKING CONTROL</a>
<li><a name="TOC24" href="#SEC24">CALLOUTS</a>
<li><a name="TOC25" href="#SEC25">SEE ALSO</a>
<li><a name="TOC26" href="#SEC26">AUTHOR</a>
<li><a name="TOC27" href="#SEC27">REVISION</a>
</ul>
<br><a name="SEC1" href="#TOC1">PCRE2 REGULAR EXPRESSION SYNTAX SUMMARY</a><br>
<P>
The full syntax and semantics of the regular expressions that are supported by
PCRE2 are described in the
<a href="pcre2pattern.html"><b>pcre2pattern</b></a>
documentation. This document contains a quick-reference summary of the syntax.
</P>
<br><a name="SEC2" href="#TOC1">QUOTING</a><br>
<P>
<pre>
\x where x is non-alphanumeric is a literal x
\Q...\E treat enclosed characters as literal
</PRE>
</P>
<br><a name="SEC3" href="#TOC1">ESCAPED CHARACTERS</a><br>
<P>
This table applies to ASCII and Unicode environments.
<pre>
\a alarm, that is, the BEL character (hex 07)
\cx "control-x", where x is any ASCII printing character
\e escape (hex 1B)
\f form feed (hex 0C)
\n newline (hex 0A)
\r carriage return (hex 0D)
\t tab (hex 09)
\0dd character with octal code 0dd
\ddd character with octal code ddd, or backreference
\o{ddd..} character with octal code ddd..
\U "U" if PCRE2_ALT_BSUX is set (otherwise is an error)
\uhhhh character with hex code hhhh (if PCRE2_ALT_BSUX is set)
\xhh character with hex code hh
\x{hhh..} character with hex code hhh..
</pre>
Note that \0dd is always an octal code. The treatment of backslash followed by
a non-zero digit is complicated; for details see the section
<a href="pcre2pattern.html#digitsafterbackslash">"Non-printing characters"</a>
in the
<a href="pcre2pattern.html"><b>pcre2pattern</b></a>
documentation, where details of escape processing in EBCDIC environments are
also given.
</P>
<P>
When \x is not followed by {, from zero to two hexadecimal digits are read,
but if PCRE2_ALT_BSUX is set, \x must be followed by two hexadecimal digits to
be recognized as a hexadecimal escape; otherwise it matches a literal "x".
Likewise, if \u (in ALT_BSUX mode) is not followed by four hexadecimal digits,
it matches a literal "u".
</P>
<br><a name="SEC4" href="#TOC1">CHARACTER TYPES</a><br>
<P>
<pre>
. any character except newline;
in dotall mode, any character whatsoever
\C one code unit, even in UTF mode (best avoided)
\d a decimal digit
\D a character that is not a decimal digit
\h a horizontal white space character
\H a character that is not a horizontal white space character
\N a character that is not a newline
\p{<i>xx</i>} a character with the <i>xx</i> property
\P{<i>xx</i>} a character without the <i>xx</i> property
\R a newline sequence
\s a white space character
\S a character that is not a white space character
\v a vertical white space character
\V a character that is not a vertical white space character
\w a "word" character
\W a "non-word" character
\X a Unicode extended grapheme cluster
</pre>
\C is dangerous because it may leave the current matching point in the middle
of a UTF-8 or UTF-16 character. The application can lock out the use of \C by
setting the PCRE2_NEVER_BACKSLASH_C option. It is also possible to build PCRE2
with the use of \C permanently disabled.
</P>
<P>
By default, \d, \s, and \w match only ASCII characters, even in UTF-8 mode
or in the 16-bit and 32-bit libraries. However, if locale-specific matching is
happening, \s and \w may also match characters with code points in the range
128-255. If the PCRE2_UCP option is set, the behaviour of these escape
sequences is changed to use Unicode properties and they match many more
characters.
</P>
<br><a name="SEC5" href="#TOC1">GENERAL CATEGORY PROPERTIES FOR \p and \P</a><br>
<P>
<pre>
C Other
Cc Control
Cf Format
Cn Unassigned
Co Private use
Cs Surrogate
L Letter
Ll Lower case letter
Lm Modifier letter
Lo Other letter
Lt Title case letter
Lu Upper case letter
L& Ll, Lu, or Lt
M Mark
Mc Spacing mark
Me Enclosing mark
Mn Non-spacing mark
N Number
Nd Decimal number
Nl Letter number
No Other number
P Punctuation
Pc Connector punctuation
Pd Dash punctuation
Pe Close punctuation
Pf Final punctuation
Pi Initial punctuation
Po Other punctuation
Ps Open punctuation
S Symbol
Sc Currency symbol
Sk Modifier symbol
Sm Mathematical symbol
So Other symbol
Z Separator
Zl Line separator
Zp Paragraph separator
Zs Space separator
</PRE>
</P>
<br><a name="SEC6" href="#TOC1">PCRE2 SPECIAL CATEGORY PROPERTIES FOR \p and \P</a><br>
<P>
<pre>
Xan Alphanumeric: union of properties L and N
Xps POSIX space: property Z or tab, NL, VT, FF, CR
Xsp Perl space: property Z or tab, NL, VT, FF, CR
Xuc Univerally-named character: one that can be
represented by a Universal Character Name
Xwd Perl word: property Xan or underscore
</pre>
Perl and POSIX space are now the same. Perl added VT to its space character set
at release 5.18.
</P>
<br><a name="SEC7" href="#TOC1">SCRIPT NAMES FOR \p AND \P</a><br>
<P>
Ahom,
Anatolian_Hieroglyphs,
Arabic,
Armenian,
Avestan,
Balinese,
Bamum,
Bassa_Vah,
Batak,
Bengali,
Bopomofo,
Brahmi,
Braille,
Buginese,
Buhid,
Canadian_Aboriginal,
Carian,
Caucasian_Albanian,
Chakma,
Cham,
Cherokee,
Common,
Coptic,
Cuneiform,
Cypriot,
Cyrillic,
Deseret,
Devanagari,
Duployan,
Egyptian_Hieroglyphs,
Elbasan,
Ethiopic,
Georgian,
Glagolitic,
Gothic,
Grantha,
Greek,
Gujarati,
Gurmukhi,
Han,
Hangul,
Hanunoo,
Hatran,
Hebrew,
Hiragana,
Imperial_Aramaic,
Inherited,
Inscriptional_Pahlavi,
Inscriptional_Parthian,
Javanese,
Kaithi,
Kannada,
Katakana,
Kayah_Li,
Kharoshthi,
Khmer,
Khojki,
Khudawadi,
Lao,
Latin,
Lepcha,
Limbu,
Linear_A,
Linear_B,
Lisu,
Lycian,
Lydian,
Mahajani,
Malayalam,
Mandaic,
Manichaean,
Meetei_Mayek,
Mende_Kikakui,
Meroitic_Cursive,
Meroitic_Hieroglyphs,
Miao,
Modi,
Mongolian,
Mro,
Multani,
Myanmar,
Nabataean,
New_Tai_Lue,
Nko,
Ogham,
Ol_Chiki,
Old_Hungarian,
Old_Italic,
Old_North_Arabian,
Old_Permic,
Old_Persian,
Old_South_Arabian,
Old_Turkic,
Oriya,
Osmanya,
Pahawh_Hmong,
Palmyrene,
Pau_Cin_Hau,
Phags_Pa,
Phoenician,
Psalter_Pahlavi,
Rejang,
Runic,
Samaritan,
Saurashtra,
Sharada,
Shavian,
Siddham,
SignWriting,
Sinhala,
Sora_Sompeng,
Sundanese,
Syloti_Nagri,
Syriac,
Tagalog,
Tagbanwa,
Tai_Le,
Tai_Tham,
Tai_Viet,
Takri,
Tamil,
Telugu,
Thaana,
Thai,
Tibetan,
Tifinagh,
Tirhuta,
Ugaritic,
Vai,
Warang_Citi,
Yi.
</P>
<br><a name="SEC8" href="#TOC1">CHARACTER CLASSES</a><br>
<P>
<pre>
[...] positive character class
[^...] negative character class
[x-y] range (can be used for hex characters)
[[:xxx:]] positive POSIX named set
[[:^xxx:]] negative POSIX named set
alnum alphanumeric
alpha alphabetic
ascii 0-127
blank space or tab
cntrl control character
digit decimal digit
graph printing, excluding space
lower lower case letter
print printing, including space
punct printing, excluding alphanumeric
space white space
upper upper case letter
word same as \w
xdigit hexadecimal digit
</pre>
In PCRE2, POSIX character set names recognize only ASCII characters by default,
but some of them use Unicode properties if PCRE2_UCP is set. You can use
\Q...\E inside a character class.
</P>
<br><a name="SEC9" href="#TOC1">QUANTIFIERS</a><br>
<P>
<pre>
? 0 or 1, greedy
?+ 0 or 1, possessive
?? 0 or 1, lazy
* 0 or more, greedy
*+ 0 or more, possessive
*? 0 or more, lazy
+ 1 or more, greedy
++ 1 or more, possessive
+? 1 or more, lazy
{n} exactly n
{n,m} at least n, no more than m, greedy
{n,m}+ at least n, no more than m, possessive
{n,m}? at least n, no more than m, lazy
{n,} n or more, greedy
{n,}+ n or more, possessive
{n,}? n or more, lazy
</PRE>
</P>
<br><a name="SEC10" href="#TOC1">ANCHORS AND SIMPLE ASSERTIONS</a><br>
<P>
<pre>
\b word boundary
\B not a word boundary
^ start of subject
also after an internal newline in multiline mode
(after any newline if PCRE2_ALT_CIRCUMFLEX is set)
\A start of subject
$ end of subject
also before newline at end of subject
also before internal newline in multiline mode
\Z end of subject
also before newline at end of subject
\z end of subject
\G first matching position in subject
</PRE>
</P>
<br><a name="SEC11" href="#TOC1">MATCH POINT RESET</a><br>
<P>
<pre>
\K reset start of match
</pre>
\K is honoured in positive assertions, but ignored in negative ones.
</P>
<br><a name="SEC12" href="#TOC1">ALTERNATION</a><br>
<P>
<pre>
expr|expr|expr...
</PRE>
</P>
<br><a name="SEC13" href="#TOC1">CAPTURING</a><br>
<P>
<pre>
(...) capturing group
(?&#60;name&#62;...) named capturing group (Perl)
(?'name'...) named capturing group (Perl)
(?P&#60;name&#62;...) named capturing group (Python)
(?:...) non-capturing group
(?|...) non-capturing group; reset group numbers for
capturing groups in each alternative
</PRE>
</P>
<br><a name="SEC14" href="#TOC1">ATOMIC GROUPS</a><br>
<P>
<pre>
(?&#62;...) atomic, non-capturing group
</PRE>
</P>
<br><a name="SEC15" href="#TOC1">COMMENT</a><br>
<P>
<pre>
(?#....) comment (not nestable)
</PRE>
</P>
<br><a name="SEC16" href="#TOC1">OPTION SETTING</a><br>
<P>
<pre>
(?i) caseless
(?J) allow duplicate names
(?m) multiline
(?s) single line (dotall)
(?U) default ungreedy (lazy)
(?x) extended (ignore white space)
(?-...) unset option(s)
</pre>
The following are recognized only at the very start of a pattern or after one
of the newline or \R options with similar syntax. More than one of them may
appear.
<pre>
(*LIMIT_MATCH=d) set the match limit to d (decimal number)
(*LIMIT_RECURSION=d) set the recursion limit to d (decimal number)
(*NOTEMPTY) set PCRE2_NOTEMPTY when matching
(*NOTEMPTY_ATSTART) set PCRE2_NOTEMPTY_ATSTART when matching
(*NO_AUTO_POSSESS) no auto-possessification (PCRE2_NO_AUTO_POSSESS)
(*NO_DOTSTAR_ANCHOR) no .* anchoring (PCRE2_NO_DOTSTAR_ANCHOR)
(*NO_JIT) disable JIT optimization
(*NO_START_OPT) no start-match optimization (PCRE2_NO_START_OPTIMIZE)
(*UTF) set appropriate UTF mode for the library in use
(*UCP) set PCRE2_UCP (use Unicode properties for \d etc)
</pre>
Note that LIMIT_MATCH and LIMIT_RECURSION can only reduce the value of the
limits set by the caller of pcre2_match(), not increase them. The application
can lock out the use of (*UTF) and (*UCP) by setting the PCRE2_NEVER_UTF or
PCRE2_NEVER_UCP options, respectively, at compile time.
</P>
<br><a name="SEC17" href="#TOC1">NEWLINE CONVENTION</a><br>
<P>
These are recognized only at the very start of the pattern or after option
settings with a similar syntax.
<pre>
(*CR) carriage return only
(*LF) linefeed only
(*CRLF) carriage return followed by linefeed
(*ANYCRLF) all three of the above
(*ANY) any Unicode newline sequence
</PRE>
</P>
<br><a name="SEC18" href="#TOC1">WHAT \R MATCHES</a><br>
<P>
These are recognized only at the very start of the pattern or after option
setting with a similar syntax.
<pre>
(*BSR_ANYCRLF) CR, LF, or CRLF
(*BSR_UNICODE) any Unicode newline sequence
</PRE>
</P>
<br><a name="SEC19" href="#TOC1">LOOKAHEAD AND LOOKBEHIND ASSERTIONS</a><br>
<P>
<pre>
(?=...) positive look ahead
(?!...) negative look ahead
(?&#60;=...) positive look behind
(?&#60;!...) negative look behind
</pre>
Each top-level branch of a look behind must be of a fixed length.
</P>
<br><a name="SEC20" href="#TOC1">BACKREFERENCES</a><br>
<P>
<pre>
\n reference by number (can be ambiguous)
\gn reference by number
\g{n} reference by number
\g{-n} relative reference by number
\k&#60;name&#62; reference by name (Perl)
\k'name' reference by name (Perl)
\g{name} reference by name (Perl)
\k{name} reference by name (.NET)
(?P=name) reference by name (Python)
</PRE>
</P>
<br><a name="SEC21" href="#TOC1">SUBROUTINE REFERENCES (POSSIBLY RECURSIVE)</a><br>
<P>
<pre>
(?R) recurse whole pattern
(?n) call subpattern by absolute number
(?+n) call subpattern by relative number
(?-n) call subpattern by relative number
(?&name) call subpattern by name (Perl)
(?P&#62;name) call subpattern by name (Python)
\g&#60;name&#62; call subpattern by name (Oniguruma)
\g'name' call subpattern by name (Oniguruma)
\g&#60;n&#62; call subpattern by absolute number (Oniguruma)
\g'n' call subpattern by absolute number (Oniguruma)
\g&#60;+n&#62; call subpattern by relative number (PCRE2 extension)
\g'+n' call subpattern by relative number (PCRE2 extension)
\g&#60;-n&#62; call subpattern by relative number (PCRE2 extension)
\g'-n' call subpattern by relative number (PCRE2 extension)
</PRE>
</P>
<br><a name="SEC22" href="#TOC1">CONDITIONAL PATTERNS</a><br>
<P>
<pre>
(?(condition)yes-pattern)
(?(condition)yes-pattern|no-pattern)
(?(n) absolute reference condition
(?(+n) relative reference condition
(?(-n) relative reference condition
(?(&#60;name&#62;) named reference condition (Perl)
(?('name') named reference condition (Perl)
(?(name) named reference condition (PCRE2)
(?(R) overall recursion condition
(?(Rn) specific group recursion condition
(?(R&name) specific recursion condition
(?(DEFINE) define subpattern for reference
(?(VERSION[&#62;]=n.m) test PCRE2 version
(?(assert) assertion condition
</PRE>
</P>
<br><a name="SEC23" href="#TOC1">BACKTRACKING CONTROL</a><br>
<P>
The following act immediately they are reached:
<pre>
(*ACCEPT) force successful match
(*FAIL) force backtrack; synonym (*F)
(*MARK:NAME) set name to be passed back; synonym (*:NAME)
</pre>
The following act only when a subsequent match failure causes a backtrack to
reach them. They all force a match failure, but they differ in what happens
afterwards. Those that advance the start-of-match point do so only if the
pattern is not anchored.
<pre>
(*COMMIT) overall failure, no advance of starting point
(*PRUNE) advance to next starting character
(*PRUNE:NAME) equivalent to (*MARK:NAME)(*PRUNE)
(*SKIP) advance to current matching position
(*SKIP:NAME) advance to position corresponding to an earlier
(*MARK:NAME); if not found, the (*SKIP) is ignored
(*THEN) local failure, backtrack to next alternation
(*THEN:NAME) equivalent to (*MARK:NAME)(*THEN)
</PRE>
</P>
<br><a name="SEC24" href="#TOC1">CALLOUTS</a><br>
<P>
<pre>
(?C) callout (assumed number 0)
(?Cn) callout with numerical data n
(?C"text") callout with string data
</pre>
The allowed string delimiters are ` ' " ^ % # $ (which are the same for the
start and the end), and the starting delimiter { matched with the ending
delimiter }. To encode the ending delimiter within the string, double it.
</P>
<br><a name="SEC25" href="#TOC1">SEE ALSO</a><br>
<P>
<b>pcre2pattern</b>(3), <b>pcre2api</b>(3), <b>pcre2callout</b>(3),
<b>pcre2matching</b>(3), <b>pcre2</b>(3).
</P>
<br><a name="SEC26" href="#TOC1">AUTHOR</a><br>
<P>
Philip Hazel
<br>
University Computing Service
<br>
Cambridge, England.
<br>
</P>
<br><a name="SEC27" href="#TOC1">REVISION</a><br>
<P>
Last updated: 16 October 2015
<br>
Copyright &copy; 1997-2015 University of Cambridge.
<br>
<p>
Return to the <a href="index.html">PCRE2 index page</a>.
</p>