blob: 36dc638edd7c689313299e4e90da363018f0b4b5 [file] [log] [blame]
#! /bin/sh
###############################################################################
# Run the PCRE2 tests using the pcre2test program. The appropriate tests are
# selected, depending on which build-time options were used.
#
# When JIT support is available, all appropriate tests are run with and without
# JIT, unless "-nojit" is given on the command line. There are also two tests
# for JIT-specific features, one to be run when JIT support is available
# (unless "-nojit" is specified), and one when it is not.
#
# Whichever of the 8-, 16- and 32-bit libraries exist are tested. It is also
# possible to select which to test by giving "-8", "-16" or "-32" on the
# command line.
#
# As well as "-nojit", "-8", "-16", and "-32", arguments for this script are
# individual test numbers, ranges of tests such as 3-6 or 3- (meaning 3 to the
# end), or a number preceded by ~ to exclude a test. For example, "3-15 ~10"
# runs tests 3 to 15, excluding test 10, and just "~10" runs all the tests
# except test 10. Whatever order the arguments are in, the tests are always run
# in numerical order.
#
# Inappropriate tests are automatically skipped (with a comment to say so). For
# example, if JIT support is not compiled, test 16 is skipped, whereas if JIT
# support is compiled, test 15 is skipped.
#
# Other arguments can be one of the words "-valgrind", "-valgrind-log", or
# "-sim" followed by an argument to run cross-compiled executables under a
# simulator, for example:
#
# RunTest 3 -sim "qemu-arm -s 8388608"
#
# For backwards compatibility, -nojit, -valgrind, -valgrind-log, and -sim may
# be given without the leading "-" character.
#
# When PCRE2 is compiled by clang with -fsanitize arguments, some tests need
# very much more stack than normal. In environments where the stack can be
# set at runtime, -bigstack sets a gigantic stack.
#
# There are two special cases where only one argument is allowed:
#
# If the first and only argument is "ebcdic", the script runs the special
# EBCDIC test that can be useful for checking certain EBCDIC features, even
# when run in an ASCII environment. PCRE2 must be built with EBCDIC support for
# this test to be run.
#
# If the script is obeyed as "RunTest list", a list of available tests is
# output, but none of them are run.
###############################################################################
# Define test titles in variables so that they can be output as a list. Some
# of them are modified (e.g. with -8 or -16) when used in the actual tests.
title0="Test 0: Unchecked pcre2test argument tests (to improve coverage)"
title1="Test 1: Main non-UTF, non-UCP functionality (compatible with Perl >= 5.10)"
title2="Test 2: API, errors, internals, and non-Perl stuff"
title3="Test 3: Locale-specific features"
title4A="Test 4: UTF"
title4B=" and Unicode property support (compatible with Perl >= 5.10)"
title5A="Test 5: API, internals, and non-Perl stuff for UTF"
title5B=" and UCP support"
title6="Test 6: DFA matching main non-UTF, non-UCP functionality"
title7A="Test 7: DFA matching with UTF"
title7B=" and Unicode property support"
title8="Test 8: Internal offsets and code size tests"
title9="Test 9: Specials for the basic 8-bit library"
title10="Test 10: Specials for the 8-bit library with UTF-8 and UCP support"
title11="Test 11: Specials for the basic 16-bit and 32-bit libraries"
title12="Test 12: Specials for the 16-bit and 32-bit libraries UTF and UCP support"
title13="Test 13: DFA specials for the basic 16-bit and 32-bit libraries"
title14="Test 14: DFA specials for UTF and UCP support"
title15="Test 15: Non-JIT limits and other non-JIT tests"
title16="Test 16: JIT-specific features when JIT is not available"
title17="Test 17: JIT-specific features when JIT is available"
title18="Test 18: Tests of the POSIX interface, excluding UTF/UCP"
title19="Test 19: Tests of the POSIX interface with UTF/UCP"
title20="Test 20: Serialization tests"
title21="Test 21: \C tests without UTF (supported for DFA matching)"
title22="Test 22: \C tests with UTF (not supported for DFA matching)"
title23="Test 23: \C disabled test"
maxtest=23
if [ $# -eq 1 -a "$1" = "list" ]; then
echo $title0
echo $title1
echo $title2 "(not UTF or UCP)"
echo $title3
echo $title4A $title4B
echo $title5A $title5B
echo $title6
echo $title7A $title7B
echo $title8
echo $title9
echo $title10
echo $title11
echo $title12
echo $title13
echo $title14
echo $title15
echo $title16
echo $title17
echo $title18
echo $title19
echo $title20
echo $title21
echo $title22
echo $title23
exit 0
fi
# Set up a suitable "diff" command for comparison. Some systems
# have a diff that lacks a -u option. Try to deal with this.
cf="diff"
diff -u /dev/null /dev/null 2>/dev/null && cf="diff -u"
# Find the test data
if [ -n "$srcdir" -a -d "$srcdir" ] ; then
testdata="$srcdir/testdata"
elif [ -d "./testdata" ] ; then
testdata=./testdata
elif [ -d "../testdata" ] ; then
testdata=../testdata
else
echo "Cannot find the testdata directory"
exit 1
fi
# ------ Function to check results of a test -------
# This function is called with three parameters:
#
# $1 the value of $? after a call to pcre2test
# $2 the suffix of the output file to compare with
# $3 the $opt value (empty, -jit, or -dfa)
#
# Note: must define using name(), not "function name", for Solaris.
checkresult()
{
if [ $1 -ne 0 ] ; then
echo "** pcre2test failed - check testtry"
exit 1
fi
case "$3" in
-jit) with=" with JIT";;
-dfa) with=" with DFA";;
*) with="";;
esac
$cf $testdata/testoutput$2 testtry
if [ $? != 0 ] ; then
echo ""
echo "** Test $2 failed$with"
exit 1
fi
echo " OK$with"
}
# ------ Function to run and check a special pcre2test arguments test -------
checkspecial()
{
$valgrind $vjs ./pcre2test $1 >>testtry
if [ $? -ne 0 ] ; then
echo "** pcre2test $1 failed - check testtry"
exit 1
fi
}
# ------ Special EBCDIC Test -------
if [ $# -eq 1 -a "$1" = "ebcdic" ]; then
$valgrind ./pcre2test -C ebcdic >/dev/null
ebcdic=$?
if [ $ebcdic -ne 1 ] ; then
echo "Cannot run EBCDIC tests: EBCDIC support not compiled"
exit 1
fi
for opt in "" "-dfa"; do
./pcre2test -q $opt $testdata/testinputEBC >testtry
checkresult $? EBC "$opt"
done
exit 0
fi
# ------ Normal Tests ------
# Default values
arg8=
arg16=
arg32=
nojit=
bigstack=
sim=
skip=
valgrind=
vjs=
# This is in case the caller has set aliases (as I do - PH)
unset cp ls mv rm
# Process options and select which tests to run; for those that are explicitly
# requested, check that the necessary optional facilities are available.
do0=no
do1=no
do2=no
do3=no
do4=no
do5=no
do6=no
do7=no
do8=no
do9=no
do10=no
do11=no
do12=no
do13=no
do14=no
do15=no
do16=no
do17=no
do18=no
do19=no
do20=no
do21=no
do22=no
do23=no
while [ $# -gt 0 ] ; do
case $1 in
0) do0=yes;;
1) do1=yes;;
2) do2=yes;;
3) do3=yes;;
4) do4=yes;;
5) do5=yes;;
6) do6=yes;;
7) do7=yes;;
8) do8=yes;;
9) do9=yes;;
10) do10=yes;;
11) do11=yes;;
12) do12=yes;;
13) do13=yes;;
14) do14=yes;;
15) do15=yes;;
16) do16=yes;;
17) do17=yes;;
18) do18=yes;;
19) do19=yes;;
20) do20=yes;;
21) do21=yes;;
22) do22=yes;;
23) do23=yes;;
-8) arg8=yes;;
-16) arg16=yes;;
-32) arg32=yes;;
bigstack|-bigstack) bigstack=yes;;
nojit|-nojit) nojit=yes;;
sim|-sim) shift; sim=$1;;
valgrind|-valgrind) valgrind="valgrind --tool=memcheck -q --smc-check=all";;
valgrind-log|-valgrind-log) valgrind="valgrind --tool=memcheck --num-callers=30 --leak-check=no --error-limit=no --smc-check=all --log-file=report.%p ";;
~*)
if expr "$1" : '~[0-9][0-9]*$' >/dev/null; then
skip="$skip `expr "$1" : '~\([0-9]*\)*$'`"
else
echo "Unknown option or test selector '$1'"; exit 1
fi
;;
*-*)
if expr "$1" : '[0-9][0-9]*-[0-9]*$' >/dev/null; then
tf=`expr "$1" : '\([0-9]*\)'`
tt=`expr "$1" : '.*-\([0-9]*\)'`
if [ "$tt" = "" ] ; then tt=$maxtest; fi
if expr \( "$tt" ">" "$maxtest" \) >/dev/null; then
echo "Invalid test range '$1'"; exit 1
fi
while expr "$tf" "<=" "$tt" >/dev/null; do
eval do${tf}=yes
tf=`expr $tf + 1`
done
else
echo "Invalid test range '$1'"; exit 1
fi
;;
*) echo "Unknown option or test selector '$1'"; exit 1;;
esac
shift
done
# Find which optional facilities are available.
$sim ./pcre2test -C linksize >/dev/null
link_size=$?
if [ $link_size -lt 2 ] ; then
echo "RunTest: Failed to find internal link size"
exit 1
fi
if [ $link_size -gt 4 ] ; then
echo "RunTest: Failed to find internal link size"
exit 1
fi
# If it is possible to set the system stack size, arrange to set a value for
# test 2, which needs more than the even the Linux default when PCRE2 has been
# compiled by gcc with -fsanitize=address. When the compiler is clang, sanitize
# options require an even bigger stack for test 2, and an increased stack for
# some of the other tests.
$sim ./pcre2test -S 1 /dev/null /dev/null
if [ $? -eq 0 ] ; then
if [ "$bigstack" = "" ] ; then
test2stack="-S 16"
defaultstack=""
else
test2stack="-S 1024"
defaultstack="-S 64"
fi
else
test2stack=""
defaultstack=""
fi
# All of 8-bit, 16-bit, and 32-bit character strings may be supported, but only
# one need be.
$sim ./pcre2test -C pcre2-8 >/dev/null
support8=$?
$sim ./pcre2test -C pcre2-16 >/dev/null
support16=$?
$sim ./pcre2test -C pcre2-32 >/dev/null
support32=$?
# \C may be disabled
$sim ./pcre2test -C backslash-C >/dev/null
supportBSC=$?
# Initialize all bitsizes skipped
test8=skip
test16=skip
test32=skip
# If no bitsize arguments, select all that are available
if [ "$arg8$arg16$arg32" = "" ] ; then
if [ $support8 -ne 0 ] ; then
test8=-8
fi
if [ $support16 -ne 0 ] ; then
test16=-16
fi
if [ $support32 -ne 0 ] ; then
test32=-32
fi
# Otherwise, select requested bit sizes
else
if [ "$arg8" = yes ] ; then
if [ $support8 -eq 0 ] ; then
echo "Cannot run 8-bit library tests: 8-bit library not compiled"
exit 1
fi
test8=-8
fi
if [ "$arg16" = yes ] ; then
if [ $support16 -eq 0 ] ; then
echo "Cannot run 16-bit library tests: 16-bit library not compiled"
exit 1
fi
test16=-16
fi
if [ "$arg32" = yes ] ; then
if [ $support32 -eq 0 ] ; then
echo "Cannot run 32-bit library tests: 32-bit library not compiled"
exit 1
fi
test32=-32
fi
fi
# UTF support is implied by Unicode support, and it always applies to all bit
# sizes if both are supported; we can't have UTF-8 support without UTF-16 or
# UTF-32 support.
$sim ./pcre2test -C unicode >/dev/null
utf=$?
# When JIT is used with valgrind, we need to set up valgrind suppressions as
# otherwise there are a lot of false positive valgrind reports when the
# the hardware supports SSE2.
jitopt=
$sim ./pcre2test -C jit >/dev/null
jit=$?
if [ $jit -ne 0 -a "$nojit" != "yes" ] ; then
jitopt=-jit
if [ "$valgrind" != "" ] ; then
vjs="--suppressions=$testdata/valgrind-jit.supp"
fi
fi
# If no specific tests were requested, select all. Those that are not
# relevant will be automatically skipped.
if [ $do0 = no -a $do1 = no -a $do2 = no -a $do3 = no -a \
$do4 = no -a $do5 = no -a $do6 = no -a $do7 = no -a \
$do8 = no -a $do9 = no -a $do10 = no -a $do11 = no -a \
$do12 = no -a $do13 = no -a $do14 = no -a $do15 = no -a \
$do16 = no -a $do17 = no -a $do18 = no -a $do19 = no -a \
$do20 = no -a $do21 = no -a $do22 = no -a $do23 = no \
]; then
do0=yes
do1=yes
do2=yes
do3=yes
do4=yes
do5=yes
do6=yes
do7=yes
do8=yes
do9=yes
do10=yes
do11=yes
do12=yes
do13=yes
do14=yes
do15=yes
do16=yes
do17=yes
do18=yes
do19=yes
do20=yes
do21=yes
do22=yes
do23=yes
fi
# Handle any explicit skips at this stage, so that an argument list may consist
# only of explicit skips.
for i in $skip; do eval do$i=no; done
# Show which release and which test data
echo ""
echo PCRE2 C library tests using test data from $testdata
$sim ./pcre2test /dev/null
echo ""
for bmode in "$test8" "$test16" "$test32"; do
case "$bmode" in
skip) continue;;
-16) if [ "$test8$test32" != "skipskip" ] ; then echo ""; fi
bits=16; echo "---- Testing 16-bit library ----"; echo "";;
-32) if [ "$test8$test16" != "skipskip" ] ; then echo ""; fi
bits=32; echo "---- Testing 32-bit library ----"; echo "";;
-8) bits=8; echo "---- Testing 8-bit library ----"; echo "";;
esac
# Test 0 is a special test. Its output is not checked, because it will
# be different on different hardware and with different configurations.
# Running this test just exercises the code.
if [ $do0 = yes ] ; then
echo $title0
echo '/abc/jit,memory' >testSinput
echo ' abc' >>testSinput
echo '' >testtry
checkspecial '-C'
checkspecial '--help'
checkspecial '-S 1 -t 10 testSinput'
echo " OK"
fi
# Primary non-UTF test, compatible with JIT and all versions of Perl >= 5.8
if [ $do1 = yes ] ; then
echo $title1
for opt in "" $jitopt; do
$sim $valgrind ${opt:+$vjs} ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput1 testtry
checkresult $? 1 "$opt"
done
fi
# PCRE2 tests that are not Perl-compatible: API, errors, internals
if [ $do2 = yes ] ; then
echo $title2 "(excluding UTF-$bits)"
for opt in "" $jitopt; do
$sim $valgrind ${opt:+$vjs} ./pcre2test -q $test2stack $bmode $opt $testdata/testinput2 testtry
if [ $? = 0 ] ; then
checkresult $? 2 "$opt"
else
echo " "
echo "** Test 2 requires a lot of stack. If it has crashed with a"
echo "** segmentation fault, it may be that you do not have enough"
echo "** stack available by default. Please see the 'pcre2stack' man"
echo "** page for a discussion of PCRE2's stack usage."
echo " "
exit 1
fi
done
fi
# Locale-specific tests, provided that either the "fr_FR", "fr_CA", "french"
# or "fr" locale is available. The first two are Unix-like standards; the
# last two are for Windows. Unfortunately, different versions of the French
# locale give different outputs for some items. This test passes if the
# output matches any one of the alternative output files.
if [ $do3 = yes ] ; then
locale=
# In some environments locales that are listed by the "locale -a"
# command do not seem to work with setlocale(). Therefore, we do
# a preliminary test to see if pcre2test can set one before going
# on to use it.
for loc in 'fr_FR' 'french' 'fr' 'fr_CA'; do
locale -a | grep "^$loc\$" >/dev/null
if [ $? -eq 0 ] ; then
echo "/a/locale=$loc" | \
$sim $valgrind ./pcre2test -q $bmode | \
grep "Failed to set locale" >/dev/null
if [ $? -ne 0 ] ; then
locale=$loc
if [ "$locale" = "fr_FR" ] ; then
infile=$testdata/testinput3
outfile=$testdata/testoutput3
outfile2=$testdata/testoutput3A
outfile3=$testdata/testoutput3B
else
infile=test3input
outfile=test3output
outfile2=test3outputA
outfile3=test3outputB
sed "s/fr_FR/$loc/" $testdata/testinput3 >test3input
sed "s/fr_FR/$loc/" $testdata/testoutput3 >test3output
sed "s/fr_FR/$loc/" $testdata/testoutput3A >test3outputA
sed "s/fr_FR/$loc/" $testdata/testoutput3B >test3outputB
fi
break
fi
fi
done
if [ "$locale" != "" ] ; then
echo $title3 "(using '$locale' locale)"
for opt in "" $jitopt; do
$sim $valgrind ${opt:+$vjs} ./pcre2test -q $defaultstack $bmode $opt $infile testtry
if [ $? = 0 ] ; then
case "$opt" in
-jit) with=" with JIT";;
*) with="";;
esac
if $cf $outfile testtry >teststdout || \
$cf $outfile2 testtry >teststdout || \
$cf $outfile3 testtry >teststdout
then
echo " OK$with"
else
echo "** Locale test did not run successfully$with. The output did not match"
echo " $outfile, $outfile2 or $outfile3."
echo " This may mean that there is a problem with the locale settings rather"
echo " than a bug in PCRE2."
exit 1
fi
else exit 1
fi
done
else
echo "Cannot test locale-specific features - none of the 'fr_FR', 'fr_CA',"
echo "'fr' or 'french' locales can be set, or the \"locale\" command is"
echo "not available to check for them."
echo " "
fi
fi
# Tests for UTF and Unicode property support
if [ $do4 = yes ] ; then
echo ${title4A}-${bits}${title4B}
if [ $utf -eq 0 ] ; then
echo " Skipped because UTF-$bits support is not available"
else
for opt in "" $jitopt; do
$sim $valgrind ${opt:+$vjs} ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput4 testtry
checkresult $? 4 "$opt"
done
fi
fi
if [ $do5 = yes ] ; then
echo ${title5A}-${bits}$title5B
if [ $utf -eq 0 ] ; then
echo " Skipped because UTF-$bits support is not available"
else
for opt in "" $jitopt; do
$sim $valgrind ${opt:+$vjs} ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput5 testtry
checkresult $? 5 "$opt"
done
fi
fi
# Tests for DFA matching support
if [ $do6 = yes ] ; then
echo $title6
$sim $valgrind ./pcre2test -q $defaultstack $bmode $testdata/testinput6 testtry
checkresult $? 6 ""
fi
if [ $do7 = yes ] ; then
echo ${title7A}-${bits}$title7B
if [ $utf -eq 0 ] ; then
echo " Skipped because UTF-$bits support is not available"
else
$sim $valgrind ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput7 testtry
checkresult $? 7 ""
fi
fi
# Test of internal offsets and code sizes. This test is run only when there
# is UTF/UCP support. The actual tests are mostly the same as in some of the
# above, but in this test we inspect some offsets and sizes. This is a
# doublecheck for the maintainer, just in case something changes unexpectely.
# The output from this test is different in 8-bit, 16-bit, and 32-bit modes
# and for different link sizes, so there are different output files for each
# mode and link size.
if [ $do8 = yes ] ; then
echo $title8
if [ $utf -eq 0 ] ; then
echo " Skipped because UTF-$bits support is not available"
else
$sim $valgrind ./pcre2test -q $defaultstack $bmode $testdata/testinput8 testtry
checkresult $? 8-$bits-$link_size ""
fi
fi
# Tests for 8-bit-specific features
if [ "$do9" = yes ] ; then
echo $title9
if [ "$bits" = "16" -o "$bits" = "32" ] ; then
echo " Skipped when running 16/32-bit tests"
else
for opt in "" $jitopt; do
$sim $valgrind ${opt:+$vjs} ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput9 testtry
checkresult $? 9 "$opt"
done
fi
fi
# Tests for UTF-8 and UCP 8-bit-specific features
if [ "$do10" = yes ] ; then
echo $title10
if [ "$bits" = "16" -o "$bits" = "32" ] ; then
echo " Skipped when running 16/32-bit tests"
elif [ $utf -eq 0 ] ; then
echo " Skipped because UTF-$bits support is not available"
else
for opt in "" $jitopt; do
$sim $valgrind ${opt:+$vjs} ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput10 testtry
checkresult $? 10 "$opt"
done
fi
fi
# Tests for 16-bit and 32-bit features. Output is different for the two widths.
if [ $do11 = yes ] ; then
echo $title11
if [ "$bits" = "8" ] ; then
echo " Skipped when running 8-bit tests"
else
for opt in "" $jitopt; do
$sim $valgrind ${opt:+$vjs} ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput11 testtry
checkresult $? 11-$bits "$opt"
done
fi
fi
# Tests for 16-bit and 32-bit features with UTF-16/32 and UCP support. Output
# is different for the two widths.
if [ $do12 = yes ] ; then
echo $title12
if [ "$bits" = "8" ] ; then
echo " Skipped when running 8-bit tests"
elif [ $utf -eq 0 ] ; then
echo " Skipped because UTF-$bits support is not available"
else
for opt in "" $jitopt; do
$sim $valgrind ${opt:+$vjs} ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput12 testtry
checkresult $? 12-$bits "$opt"
done
fi
fi
# Tests for 16/32-bit-specific features in DFA non-UTF modes
if [ $do13 = yes ] ; then
echo $title13
if [ "$bits" = "8" ] ; then
echo " Skipped when running 8-bit tests"
else
$sim $valgrind ./pcre2test -q $defaultstack $bmode $testdata/testinput13 testtry
checkresult $? 13 ""
fi
fi
# Tests for DFA UTF and UCP features. Output is different for the different widths.
if [ $do14 = yes ] ; then
echo $title14
if [ $utf -eq 0 ] ; then
echo " Skipped because UTF-$bits support is not available"
else
$sim $valgrind ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput14 testtry
checkresult $? 14-$bits ""
fi
fi
# Test non-JIT match and recursion limits
if [ $do15 = yes ] ; then
echo $title15
$sim $valgrind ./pcre2test -q $defaultstack $bmode $testdata/testinput15 testtry
checkresult $? 15 ""
fi
# Test JIT-specific features when JIT is not available
if [ $do16 = yes ] ; then
echo $title16
if [ $jit -ne 0 ] ; then
echo " Skipped because JIT is available"
else
$sim $valgrind ./pcre2test -q $defaultstack $bmode $testdata/testinput16 testtry
checkresult $? 16 ""
fi
fi
# Test JIT-specific features when JIT is available
if [ $do17 = yes ] ; then
echo $title17
if [ $jit -eq 0 -o "$nojit" = "yes" ] ; then
echo " Skipped because JIT is not available or nojit was specified"
else
$sim $valgrind $vjs ./pcre2test -q $defaultstack $bmode $testdata/testinput17 testtry
checkresult $? 17 ""
fi
fi
# Tests for the POSIX interface without UTF/UCP (8-bit only)
if [ $do18 = yes ] ; then
echo $title18
if [ "$bits" = "16" -o "$bits" = "32" ] ; then
echo " Skipped when running 16/32-bit tests"
else
$sim $valgrind ./pcre2test -q $defaultstack $bmode $testdata/testinput18 testtry
checkresult $? 18 ""
fi
fi
# Tests for the POSIX interface with UTF/UCP (8-bit only)
if [ $do19 = yes ] ; then
echo $title19
if [ "$bits" = "16" -o "$bits" = "32" ] ; then
echo " Skipped when running 16/32-bit tests"
elif [ $utf -eq 0 ] ; then
echo " Skipped because UTF-$bits support is not available"
else
$sim $valgrind ./pcre2test -q $defaultstack $bmode $testdata/testinput19 testtry
checkresult $? 19 ""
fi
fi
# Serialization tests
if [ $do20 = yes ] ; then
echo $title20
$sim $valgrind ./pcre2test -q $defaultstack $bmode $testdata/testinput20 testtry
checkresult $? 20 ""
fi
# \C tests without UTF - DFA matching is supported
if [ "$do21" = yes ] ; then
echo $title21
if [ $supportBSC -eq 0 ] ; then
echo " Skipped because \C is disabled"
else
for opt in "" $jitopt -dfa; do
$sim $valgrind ${opt:+$vjs} ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput21 testtry
checkresult $? 21 "$opt"
done
fi
fi
# \C tests with UTF - DFA matching is not supported for \C in UTF mode
if [ "$do22" = yes ] ; then
echo $title22
if [ $supportBSC -eq 0 ] ; then
echo " Skipped because \C is disabled"
elif [ $utf -eq 0 ] ; then
echo " Skipped because UTF-$bits support is not available"
else
for opt in "" $jitopt; do
$sim $valgrind ${opt:+$vjs} ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput22 testtry
checkresult $? 22-$bits "$opt"
done
fi
fi
# Test when \C is disabled
if [ "$do23" = yes ] ; then
echo $title23
if [ $supportBSC -ne 0 ] ; then
echo " Skipped because \C is not disabled"
else
$sim $valgrind ${opt:+$vjs} ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput23 testtry
checkresult $? 23 ""
fi
fi
# End of loop for 8/16/32-bit tests
done
# Clean up local working files
rm -f testSinput test3input testsaved1 testsaved2 test3output test3outputA test3outputB teststdout teststderr testtry
# End