blob: e0e040f34c68f7652e4d2c9e302fa2945f5f08e1 [file] [log] [blame]
/*
* Copyright (C) 2009 Texas Instruments Inc.
*
* Modified from mach-omap2/board-zoom2.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/gpio.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/wl12xx.h>
#include <linux/mmc/host.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/common.h>
#include <plat/usb.h>
#include <mach/board-zoom.h>
#include "mux.h"
#include "hsmmc.h"
#define OMAP_ZOOM_WLAN_PMENA_GPIO (101)
#define OMAP_ZOOM_WLAN_IRQ_GPIO (162)
#define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES)
/* Zoom2 has Qwerty keyboard*/
static uint32_t board_keymap[] = {
KEY(0, 0, KEY_E),
KEY(0, 1, KEY_R),
KEY(0, 2, KEY_T),
KEY(0, 3, KEY_HOME),
KEY(0, 6, KEY_I),
KEY(0, 7, KEY_LEFTSHIFT),
KEY(1, 0, KEY_D),
KEY(1, 1, KEY_F),
KEY(1, 2, KEY_G),
KEY(1, 3, KEY_SEND),
KEY(1, 6, KEY_K),
KEY(1, 7, KEY_ENTER),
KEY(2, 0, KEY_X),
KEY(2, 1, KEY_C),
KEY(2, 2, KEY_V),
KEY(2, 3, KEY_END),
KEY(2, 6, KEY_DOT),
KEY(2, 7, KEY_CAPSLOCK),
KEY(3, 0, KEY_Z),
KEY(3, 1, KEY_KPPLUS),
KEY(3, 2, KEY_B),
KEY(3, 3, KEY_F1),
KEY(3, 6, KEY_O),
KEY(3, 7, KEY_SPACE),
KEY(4, 0, KEY_W),
KEY(4, 1, KEY_Y),
KEY(4, 2, KEY_U),
KEY(4, 3, KEY_F2),
KEY(4, 4, KEY_VOLUMEUP),
KEY(4, 6, KEY_L),
KEY(4, 7, KEY_LEFT),
KEY(5, 0, KEY_S),
KEY(5, 1, KEY_H),
KEY(5, 2, KEY_J),
KEY(5, 3, KEY_F3),
KEY(5, 4, KEY_UNKNOWN),
KEY(5, 5, KEY_VOLUMEDOWN),
KEY(5, 6, KEY_M),
KEY(5, 7, KEY_RIGHT),
KEY(6, 0, KEY_Q),
KEY(6, 1, KEY_A),
KEY(6, 2, KEY_N),
KEY(6, 3, KEY_BACKSPACE),
KEY(6, 6, KEY_P),
KEY(6, 7, KEY_UP),
KEY(7, 0, KEY_PROG1), /*MACRO 1 <User defined> */
KEY(7, 1, KEY_PROG2), /*MACRO 2 <User defined> */
KEY(7, 2, KEY_PROG3), /*MACRO 3 <User defined> */
KEY(7, 3, KEY_PROG4), /*MACRO 4 <User defined> */
KEY(7, 6, KEY_SELECT),
KEY(7, 7, KEY_DOWN)
};
static struct matrix_keymap_data board_map_data = {
.keymap = board_keymap,
.keymap_size = ARRAY_SIZE(board_keymap),
};
static struct twl4030_keypad_data zoom_kp_twl4030_data = {
.keymap_data = &board_map_data,
.rows = 8,
.cols = 8,
.rep = 1,
};
static struct regulator_consumer_supply zoom_vmmc1_supply = {
.supply = "vmmc",
};
static struct regulator_consumer_supply zoom_vsim_supply = {
.supply = "vmmc_aux",
};
static struct regulator_consumer_supply zoom_vmmc2_supply = {
.supply = "vmmc",
};
static struct regulator_consumer_supply zoom_vmmc3_supply = {
.supply = "vmmc",
.dev_name = "mmci-omap-hs.2",
};
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
static struct regulator_init_data zoom_vmmc1 = {
.constraints = {
.min_uV = 1850000,
.max_uV = 3150000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &zoom_vmmc1_supply,
};
/* VMMC2 for MMC2 card */
static struct regulator_init_data zoom_vmmc2 = {
.constraints = {
.min_uV = 1850000,
.max_uV = 1850000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &zoom_vmmc2_supply,
};
/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
static struct regulator_init_data zoom_vsim = {
.constraints = {
.min_uV = 1800000,
.max_uV = 3000000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &zoom_vsim_supply,
};
static struct regulator_init_data zoom_vmmc3 = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &zoom_vmmc3_supply,
};
static struct fixed_voltage_config zoom_vwlan = {
.supply_name = "vwl1271",
.microvolts = 1800000, /* 1.8V */
.gpio = OMAP_ZOOM_WLAN_PMENA_GPIO,
.startup_delay = 70000, /* 70msec */
.enable_high = 1,
.enabled_at_boot = 0,
.init_data = &zoom_vmmc3,
};
static struct platform_device omap_vwlan_device = {
.name = "reg-fixed-voltage",
.id = 1,
.dev = {
.platform_data = &zoom_vwlan,
},
};
static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
.irq = OMAP_GPIO_IRQ(OMAP_ZOOM_WLAN_IRQ_GPIO),
/* ZOOM ref clock is 26 MHz */
.board_ref_clock = 1,
};
static struct omap2_hsmmc_info mmc[] = {
{
.name = "external",
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA,
.gpio_wp = -EINVAL,
.power_saving = true,
},
{
.name = "internal",
.mmc = 2,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.nonremovable = true,
.power_saving = true,
},
{
.name = "wl1271",
.mmc = 3,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
.gpio_wp = -EINVAL,
.gpio_cd = -EINVAL,
.nonremovable = true,
},
{} /* Terminator */
};
static struct regulator_consumer_supply zoom_vpll2_supply =
REGULATOR_SUPPLY("vdds_dsi", "omapdss");
static struct regulator_consumer_supply zoom_vdda_dac_supply =
REGULATOR_SUPPLY("vdda_dac", "omapdss");
static struct regulator_init_data zoom_vpll2 = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &zoom_vpll2_supply,
};
static struct regulator_init_data zoom_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &zoom_vdda_dac_supply,
};
static int zoom_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
int ret;
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters ... we "know" the
* regulators will be set up only *after* we return.
*/
zoom_vmmc1_supply.dev = mmc[0].dev;
zoom_vsim_supply.dev = mmc[0].dev;
zoom_vmmc2_supply.dev = mmc[1].dev;
ret = gpio_request(LCD_PANEL_ENABLE_GPIO, "lcd enable");
if (ret) {
pr_err("Failed to get LCD_PANEL_ENABLE_GPIO (gpio%d).\n",
LCD_PANEL_ENABLE_GPIO);
return ret;
}
gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0);
return ret;
}
/* EXTMUTE callback function */
static void zoom2_set_hs_extmute(int mute)
{
gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute);
}
static int zoom_batt_table[] = {
/* 0 C*/
30800, 29500, 28300, 27100,
26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
4040, 3910, 3790, 3670, 3550
};
static struct twl4030_bci_platform_data zoom_bci_data = {
.battery_tmp_tbl = zoom_batt_table,
.tblsize = ARRAY_SIZE(zoom_batt_table),
};
static struct twl4030_usb_data zoom_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_gpio_platform_data zoom_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.setup = zoom_twl_gpio_setup,
};
static struct twl4030_madc_platform_data zoom_madc_data = {
.irq_line = 1,
};
static struct twl4030_codec_audio_data zoom_audio_data = {
.audio_mclk = 26000000,
};
static struct twl4030_codec_data zoom_codec_data = {
.audio_mclk = 26000000,
.audio = &zoom_audio_data,
};
static struct twl4030_platform_data zoom_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.bci = &zoom_bci_data,
.madc = &zoom_madc_data,
.usb = &zoom_usb_data,
.gpio = &zoom_gpio_data,
.keypad = &zoom_kp_twl4030_data,
.codec = &zoom_codec_data,
.vmmc1 = &zoom_vmmc1,
.vmmc2 = &zoom_vmmc2,
.vsim = &zoom_vsim,
.vpll2 = &zoom_vpll2,
.vdac = &zoom_vdac,
};
static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = {
{
I2C_BOARD_INFO("twl5030", 0x48),
.flags = I2C_CLIENT_WAKE,
.irq = INT_34XX_SYS_NIRQ,
.platform_data = &zoom_twldata,
},
};
static int __init omap_i2c_init(void)
{
if (machine_is_omap_zoom2()) {
zoom_audio_data.ramp_delay_value = 3; /* 161 ms */
zoom_audio_data.hs_extmute = 1;
zoom_audio_data.set_hs_extmute = zoom2_set_hs_extmute;
}
omap_register_i2c_bus(1, 2400, zoom_i2c_boardinfo,
ARRAY_SIZE(zoom_i2c_boardinfo));
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
return 0;
}
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_ULPI,
.mode = MUSB_OTG,
.power = 100,
};
static void enable_board_wakeup_source(void)
{
/* T2 interrupt line (keypad) */
omap_mux_init_signal("sys_nirq",
OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
void __init zoom_peripherals_init(void)
{
if (wl12xx_set_platform_data(&omap_zoom_wlan_data))
pr_err("error setting wl12xx data\n");
omap_i2c_init();
platform_device_register(&omap_vwlan_device);
usb_musb_init(&musb_board_data);
enable_board_wakeup_source();
omap_serial_init();
}