| /* | |
| * arch/arm/plat-mxc/iomux-v1.c | |
| * | |
| * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH | |
| * Copyright (C) 2009 Uwe Kleine-Koenig, Pengutronix | |
| * | |
| * Common code for i.MX1, i.MX21 and i.MX27 | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software Foundation, Inc., | |
| * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. | |
| */ | |
| #include <linux/errno.h> | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/string.h> | |
| #include <linux/gpio.h> | |
| #include <mach/hardware.h> | |
| #include <asm/mach/map.h> | |
| #include <mach/iomux-v1.h> | |
| static void __iomem *imx_iomuxv1_baseaddr; | |
| static unsigned imx_iomuxv1_numports; | |
| static inline unsigned long imx_iomuxv1_readl(unsigned offset) | |
| { | |
| return __raw_readl(imx_iomuxv1_baseaddr + offset); | |
| } | |
| static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset) | |
| { | |
| __raw_writel(val, imx_iomuxv1_baseaddr + offset); | |
| } | |
| static inline void imx_iomuxv1_rmwl(unsigned offset, | |
| unsigned long mask, unsigned long value) | |
| { | |
| unsigned long reg = imx_iomuxv1_readl(offset); | |
| reg &= ~mask; | |
| reg |= value; | |
| imx_iomuxv1_writel(reg, offset); | |
| } | |
| static inline void imx_iomuxv1_set_puen( | |
| unsigned int port, unsigned int pin, int on) | |
| { | |
| unsigned long mask = 1 << pin; | |
| imx_iomuxv1_rmwl(MXC_PUEN(port), mask, on ? mask : 0); | |
| } | |
| static inline void imx_iomuxv1_set_ddir( | |
| unsigned int port, unsigned int pin, int out) | |
| { | |
| unsigned long mask = 1 << pin; | |
| imx_iomuxv1_rmwl(MXC_DDIR(port), mask, out ? mask : 0); | |
| } | |
| static inline void imx_iomuxv1_set_gpr( | |
| unsigned int port, unsigned int pin, int af) | |
| { | |
| unsigned long mask = 1 << pin; | |
| imx_iomuxv1_rmwl(MXC_GPR(port), mask, af ? mask : 0); | |
| } | |
| static inline void imx_iomuxv1_set_gius( | |
| unsigned int port, unsigned int pin, int inuse) | |
| { | |
| unsigned long mask = 1 << pin; | |
| imx_iomuxv1_rmwl(MXC_GIUS(port), mask, inuse ? mask : 0); | |
| } | |
| static inline void imx_iomuxv1_set_ocr( | |
| unsigned int port, unsigned int pin, unsigned int ocr) | |
| { | |
| unsigned long shift = (pin & 0xf) << 1; | |
| unsigned long mask = 3 << shift; | |
| unsigned long value = ocr << shift; | |
| unsigned long offset = pin < 16 ? MXC_OCR1(port) : MXC_OCR2(port); | |
| imx_iomuxv1_rmwl(offset, mask, value); | |
| } | |
| static inline void imx_iomuxv1_set_iconfa( | |
| unsigned int port, unsigned int pin, unsigned int aout) | |
| { | |
| unsigned long shift = (pin & 0xf) << 1; | |
| unsigned long mask = 3 << shift; | |
| unsigned long value = aout << shift; | |
| unsigned long offset = pin < 16 ? MXC_ICONFA1(port) : MXC_ICONFA2(port); | |
| imx_iomuxv1_rmwl(offset, mask, value); | |
| } | |
| static inline void imx_iomuxv1_set_iconfb( | |
| unsigned int port, unsigned int pin, unsigned int bout) | |
| { | |
| unsigned long shift = (pin & 0xf) << 1; | |
| unsigned long mask = 3 << shift; | |
| unsigned long value = bout << shift; | |
| unsigned long offset = pin < 16 ? MXC_ICONFB1(port) : MXC_ICONFB2(port); | |
| imx_iomuxv1_rmwl(offset, mask, value); | |
| } | |
| int mxc_gpio_mode(int gpio_mode) | |
| { | |
| unsigned int pin = gpio_mode & GPIO_PIN_MASK; | |
| unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; | |
| unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT; | |
| unsigned int aout = (gpio_mode >> GPIO_AOUT_SHIFT) & 3; | |
| unsigned int bout = (gpio_mode >> GPIO_BOUT_SHIFT) & 3; | |
| if (port >= imx_iomuxv1_numports) | |
| return -EINVAL; | |
| /* Pullup enable */ | |
| imx_iomuxv1_set_puen(port, pin, gpio_mode & GPIO_PUEN); | |
| /* Data direction */ | |
| imx_iomuxv1_set_ddir(port, pin, gpio_mode & GPIO_OUT); | |
| /* Primary / alternate function */ | |
| imx_iomuxv1_set_gpr(port, pin, gpio_mode & GPIO_AF); | |
| /* use as gpio? */ | |
| imx_iomuxv1_set_gius(port, pin, !(gpio_mode & (GPIO_PF | GPIO_AF))); | |
| imx_iomuxv1_set_ocr(port, pin, ocr); | |
| imx_iomuxv1_set_iconfa(port, pin, aout); | |
| imx_iomuxv1_set_iconfb(port, pin, bout); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(mxc_gpio_mode); | |
| static int imx_iomuxv1_setup_multiple(const int *list, unsigned count) | |
| { | |
| size_t i; | |
| int ret; | |
| for (i = 0; i < count; ++i) { | |
| ret = mxc_gpio_mode(list[i]); | |
| if (ret) | |
| return ret; | |
| } | |
| return ret; | |
| } | |
| int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, | |
| const char *label) | |
| { | |
| size_t i; | |
| int ret; | |
| for (i = 0; i < count; ++i) { | |
| unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK); | |
| ret = gpio_request(gpio, label); | |
| if (ret) | |
| goto err_gpio_request; | |
| } | |
| ret = imx_iomuxv1_setup_multiple(pin_list, count); | |
| if (ret) | |
| goto err_setup; | |
| return 0; | |
| err_setup: | |
| BUG_ON(i != count); | |
| err_gpio_request: | |
| mxc_gpio_release_multiple_pins(pin_list, i); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins); | |
| void mxc_gpio_release_multiple_pins(const int *pin_list, int count) | |
| { | |
| size_t i; | |
| for (i = 0; i < count; ++i) { | |
| unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK); | |
| gpio_free(gpio); | |
| } | |
| } | |
| EXPORT_SYMBOL(mxc_gpio_release_multiple_pins); | |
| static int imx_iomuxv1_init(void) | |
| { | |
| #ifdef CONFIG_ARCH_MX1 | |
| if (cpu_is_mx1()) { | |
| imx_iomuxv1_baseaddr = MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR); | |
| imx_iomuxv1_numports = MX1_NUM_GPIO_PORT; | |
| } else | |
| #endif | |
| #ifdef CONFIG_MACH_MX21 | |
| if (cpu_is_mx21()) { | |
| imx_iomuxv1_baseaddr = MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR); | |
| imx_iomuxv1_numports = MX21_NUM_GPIO_PORT; | |
| } else | |
| #endif | |
| #ifdef CONFIG_MACH_MX27 | |
| if (cpu_is_mx27()) { | |
| imx_iomuxv1_baseaddr = MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR); | |
| imx_iomuxv1_numports = MX27_NUM_GPIO_PORT; | |
| } else | |
| #endif | |
| return -ENODEV; | |
| return 0; | |
| } | |
| pure_initcall(imx_iomuxv1_init); |