blob: 41723402006b44d932d40f9c216d36f99911f10b [file] [log] [blame]
/*
* linux/arch/arm/plat-nomadik/timer.c
*
* Copyright (C) 2008 STMicroelectronics
* Copyright (C) 2010 Alessandro Rubini
* Copyright (C) 2010 Linus Walleij for ST-Ericsson
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2, as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/clockchips.h>
#include <linux/clk.h>
#include <linux/jiffies.h>
#include <linux/err.h>
#include <linux/sched.h>
#include <asm/mach/time.h>
#include <asm/sched_clock.h>
#include <plat/mtu.h>
void __iomem *mtu_base; /* Assigned by machine code */
/*
* Kernel assumes that sched_clock can be called early
* but the MTU may not yet be initialized.
*/
static cycle_t nmdk_read_timer_dummy(struct clocksource *cs)
{
return 0;
}
/* clocksource: MTU decrements, so we negate the value being read. */
static cycle_t nmdk_read_timer(struct clocksource *cs)
{
return -readl(mtu_base + MTU_VAL(0));
}
static struct clocksource nmdk_clksrc = {
.name = "mtu_0",
.rating = 200,
.read = nmdk_read_timer_dummy,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
/*
* Override the global weak sched_clock symbol with this
* local implementation which uses the clocksource to get some
* better resolution when scheduling the kernel.
*/
static DEFINE_CLOCK_DATA(cd);
unsigned long long notrace sched_clock(void)
{
u32 cyc;
if (unlikely(!mtu_base))
return 0;
cyc = -readl(mtu_base + MTU_VAL(0));
return cyc_to_sched_clock(&cd, cyc, (u32)~0);
}
static void notrace nomadik_update_sched_clock(void)
{
u32 cyc = -readl(mtu_base + MTU_VAL(0));
update_sched_clock(&cd, cyc, (u32)~0);
}
/* Clockevent device: use one-shot mode */
static void nmdk_clkevt_mode(enum clock_event_mode mode,
struct clock_event_device *dev)
{
u32 cr;
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
pr_err("%s: periodic mode not supported\n", __func__);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* Load highest value, enable device, enable interrupts */
cr = readl(mtu_base + MTU_CR(1));
writel(0, mtu_base + MTU_LR(1));
writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1));
writel(1 << 1, mtu_base + MTU_IMSC);
break;
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_UNUSED:
/* disable irq */
writel(0, mtu_base + MTU_IMSC);
/* disable timer */
cr = readl(mtu_base + MTU_CR(1));
cr &= ~MTU_CRn_ENA;
writel(cr, mtu_base + MTU_CR(1));
/* load some high default value */
writel(0xffffffff, mtu_base + MTU_LR(1));
break;
case CLOCK_EVT_MODE_RESUME:
break;
}
}
static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
{
/* writing the value has immediate effect */
writel(evt, mtu_base + MTU_LR(1));
return 0;
}
static struct clock_event_device nmdk_clkevt = {
.name = "mtu_1",
.features = CLOCK_EVT_FEAT_ONESHOT,
.rating = 200,
.set_mode = nmdk_clkevt_mode,
.set_next_event = nmdk_clkevt_next,
};
/*
* IRQ Handler for timer 1 of the MTU block.
*/
static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evdev = dev_id;
writel(1 << 1, mtu_base + MTU_ICR); /* Interrupt clear reg */
evdev->event_handler(evdev);
return IRQ_HANDLED;
}
static struct irqaction nmdk_timer_irq = {
.name = "Nomadik Timer Tick",
.flags = IRQF_DISABLED | IRQF_TIMER,
.handler = nmdk_timer_interrupt,
.dev_id = &nmdk_clkevt,
};
void __init nmdk_timer_init(void)
{
unsigned long rate;
struct clk *clk0;
u32 cr = MTU_CRn_32BITS;
clk0 = clk_get_sys("mtu0", NULL);
BUG_ON(IS_ERR(clk0));
clk_enable(clk0);
/*
* Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
* for ux500.
* Use a divide-by-16 counter if the tick rate is more than 32MHz.
* At 32 MHz, the timer (with 32 bit counter) can be programmed
* to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer
* with 16 gives too low timer resolution.
*/
rate = clk_get_rate(clk0);
if (rate > 32000000) {
rate /= 16;
cr |= MTU_CRn_PRESCALE_16;
} else {
cr |= MTU_CRn_PRESCALE_1;
}
/* Timer 0 is the free running clocksource */
writel(cr, mtu_base + MTU_CR(0));
writel(0, mtu_base + MTU_LR(0));
writel(0, mtu_base + MTU_BGLR(0));
writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
/* Now the clock source is ready */
nmdk_clksrc.read = nmdk_read_timer;
if (clocksource_register_hz(&nmdk_clksrc, rate))
pr_err("timer: failed to initialize clock source %s\n",
nmdk_clksrc.name);
init_sched_clock(&cd, nomadik_update_sched_clock, 32, rate);
/* Timer 1 is used for events */
clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
nmdk_clkevt.max_delta_ns =
clockevent_delta2ns(0xffffffff, &nmdk_clkevt);
nmdk_clkevt.min_delta_ns =
clockevent_delta2ns(0x00000002, &nmdk_clkevt);
nmdk_clkevt.cpumask = cpumask_of(0);
/* Register irq and clockevents */
setup_irq(IRQ_MTU0, &nmdk_timer_irq);
clockevents_register_device(&nmdk_clkevt);
}