blob: 45e14cac4622ba03108bd3b4845f6f77a1beab18 [file] [log] [blame]
/*
* cx231xx IR glue driver
*
* Copyright (C) 2010 Mauro Carvalho Chehab <mchehab@redhat.com>
*
* Polaris (cx231xx) has its support for IR's with a design close to MCE.
* however, a few designs are using an external I2C chip for IR, instead
* of using the one provided by the chip.
* This driver provides support for those extra devices
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*/
#include "cx231xx.h"
#include <linux/usb.h>
#include <linux/slab.h>
#define MODULE_NAME "cx231xx-input"
static int get_key_isdbt(struct IR_i2c *ir, u32 *ir_key,
u32 *ir_raw)
{
u8 cmd, scancode;
dev_dbg(&ir->rc->input_dev->dev, "%s\n", __func__);
/* poll IR chip */
if (1 != i2c_master_recv(ir->c, &cmd, 1))
return -EIO;
/* it seems that 0xFE indicates that a button is still hold
down, while 0xff indicates that no button is hold
down. 0xfe sequences are sometimes interrupted by 0xFF */
if (cmd == 0xff)
return 0;
scancode =
((cmd & 0x01) ? 0x80 : 0) |
((cmd & 0x02) ? 0x40 : 0) |
((cmd & 0x04) ? 0x20 : 0) |
((cmd & 0x08) ? 0x10 : 0) |
((cmd & 0x10) ? 0x08 : 0) |
((cmd & 0x20) ? 0x04 : 0) |
((cmd & 0x40) ? 0x02 : 0) |
((cmd & 0x80) ? 0x01 : 0);
dev_dbg(&ir->rc->input_dev->dev, "cmd %02x, scan = %02x\n",
cmd, scancode);
*ir_key = scancode;
*ir_raw = scancode;
return 1;
}
int cx231xx_ir_init(struct cx231xx *dev)
{
struct i2c_board_info info;
u8 ir_i2c_bus;
dev_dbg(&dev->udev->dev, "%s\n", __func__);
/* Only initialize if a rc keycode map is defined */
if (!cx231xx_boards[dev->model].rc_map_name)
return -ENODEV;
request_module("ir-kbd-i2c");
memset(&info, 0, sizeof(struct i2c_board_info));
memset(&dev->init_data, 0, sizeof(dev->init_data));
dev->init_data.rc_dev = rc_allocate_device();
if (!dev->init_data.rc_dev)
return -ENOMEM;
dev->init_data.name = cx231xx_boards[dev->model].name;
strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
info.platform_data = &dev->init_data;
/*
* Board-dependent values
*
* For now, there's just one type of hardware design using
* an i2c device.
*/
dev->init_data.get_key = get_key_isdbt;
dev->init_data.ir_codes = cx231xx_boards[dev->model].rc_map_name;
/* The i2c micro-controller only outputs the cmd part of NEC protocol */
dev->init_data.rc_dev->scanmask = 0xff;
dev->init_data.rc_dev->driver_name = "cx231xx";
dev->init_data.type = RC_TYPE_NEC;
info.addr = 0x30;
/* Load and bind ir-kbd-i2c */
ir_i2c_bus = cx231xx_boards[dev->model].ir_i2c_master;
dev_dbg(&dev->udev->dev, "Trying to bind ir at bus %d, addr 0x%02x\n",
ir_i2c_bus, info.addr);
i2c_new_device(&dev->i2c_bus[ir_i2c_bus].i2c_adap, &info);
return 0;
}
void cx231xx_ir_exit(struct cx231xx *dev)
{
}