| //------------------------------------------------------------------------------ |
| // <copyright file="ar6k_events.c" company="Atheros"> |
| // Copyright (c) 2007-2010 Atheros Corporation. All rights reserved. |
| // |
| // |
| // Permission to use, copy, modify, and/or distribute this software for any |
| // purpose with or without fee is hereby granted, provided that the above |
| // copyright notice and this permission notice appear in all copies. |
| // |
| // THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| // WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| // MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| // ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| // WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| // ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| // OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| // |
| // |
| //------------------------------------------------------------------------------ |
| //============================================================================== |
| // AR6K Driver layer event handling (i.e. interrupts, message polling) |
| // |
| // Author(s): ="Atheros" |
| //============================================================================== |
| |
| #include "a_config.h" |
| #include "athdefs.h" |
| #include "a_types.h" |
| #include "AR6002/hw2.0/hw/mbox_host_reg.h" |
| #include "a_osapi.h" |
| #include "../htc_debug.h" |
| #include "hif.h" |
| #include "htc_packet.h" |
| #include "ar6k.h" |
| |
| extern void AR6KFreeIOPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket); |
| extern HTC_PACKET *AR6KAllocIOPacket(AR6K_DEVICE *pDev); |
| |
| static A_STATUS DevServiceDebugInterrupt(AR6K_DEVICE *pDev); |
| |
| #define DELAY_PER_INTERVAL_MS 10 /* 10 MS delay per polling interval */ |
| |
| /* completion routine for ALL HIF layer async I/O */ |
| A_STATUS DevRWCompletionHandler(void *context, A_STATUS status) |
| { |
| HTC_PACKET *pPacket = (HTC_PACKET *)context; |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_RECV, |
| ("+DevRWCompletionHandler (Pkt:0x%lX) , Status: %d \n", |
| (unsigned long)pPacket, |
| status)); |
| |
| COMPLETE_HTC_PACKET(pPacket,status); |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_RECV, |
| ("-DevRWCompletionHandler\n")); |
| |
| return A_OK; |
| } |
| |
| /* mailbox recv message polling */ |
| A_STATUS DevPollMboxMsgRecv(AR6K_DEVICE *pDev, |
| A_UINT32 *pLookAhead, |
| int TimeoutMS) |
| { |
| A_STATUS status = A_OK; |
| int timeout = TimeoutMS/DELAY_PER_INTERVAL_MS; |
| |
| A_ASSERT(timeout > 0); |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+DevPollMboxMsgRecv \n")); |
| |
| while (TRUE) { |
| |
| if (pDev->GetPendingEventsFunc != NULL) { |
| |
| HIF_PENDING_EVENTS_INFO events; |
| |
| #ifdef THREAD_X |
| events.Polling =1; |
| #endif |
| |
| /* the HIF layer uses a special mechanism to get events, do this |
| * synchronously */ |
| status = pDev->GetPendingEventsFunc(pDev->HIFDevice, |
| &events, |
| NULL); |
| if (A_FAILED(status)) |
| { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to get pending events \n")); |
| break; |
| } |
| |
| if (events.Events & HIF_RECV_MSG_AVAIL) |
| { |
| /* there is a message available, the lookahead should be valid now */ |
| *pLookAhead = events.LookAhead; |
| |
| break; |
| } |
| } else { |
| |
| /* this is the standard HIF way.... */ |
| /* load the register table */ |
| status = HIFReadWrite(pDev->HIFDevice, |
| HOST_INT_STATUS_ADDRESS, |
| (A_UINT8 *)&pDev->IrqProcRegisters, |
| AR6K_IRQ_PROC_REGS_SIZE, |
| HIF_RD_SYNC_BYTE_INC, |
| NULL); |
| |
| if (A_FAILED(status)){ |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to read register table \n")); |
| break; |
| } |
| |
| /* check for MBOX data and valid lookahead */ |
| if (pDev->IrqProcRegisters.host_int_status & (1 << HTC_MAILBOX)) { |
| if (pDev->IrqProcRegisters.rx_lookahead_valid & (1 << HTC_MAILBOX)) |
| { |
| /* mailbox has a message and the look ahead is valid */ |
| *pLookAhead = pDev->IrqProcRegisters.rx_lookahead[HTC_MAILBOX]; |
| break; |
| } |
| } |
| |
| } |
| |
| timeout--; |
| |
| if (timeout <= 0) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, (" Timeout waiting for recv message \n")); |
| status = A_ERROR; |
| |
| /* check if the target asserted */ |
| if ( pDev->IrqProcRegisters.counter_int_status & AR6K_TARGET_DEBUG_INTR_MASK) { |
| /* target signaled an assert, process this pending interrupt |
| * this will call the target failure handler */ |
| DevServiceDebugInterrupt(pDev); |
| } |
| |
| break; |
| } |
| |
| /* delay a little */ |
| A_MDELAY(DELAY_PER_INTERVAL_MS); |
| AR_DEBUG_PRINTF(ATH_DEBUG_RECV,(" Retry Mbox Poll : %d \n",timeout)); |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-DevPollMboxMsgRecv \n")); |
| |
| return status; |
| } |
| |
| static A_STATUS DevServiceCPUInterrupt(AR6K_DEVICE *pDev) |
| { |
| A_STATUS status; |
| A_UINT8 cpu_int_status; |
| A_UINT8 regBuffer[4]; |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("CPU Interrupt\n")); |
| cpu_int_status = pDev->IrqProcRegisters.cpu_int_status & |
| pDev->IrqEnableRegisters.cpu_int_status_enable; |
| A_ASSERT(cpu_int_status); |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, |
| ("Valid interrupt source(s) in CPU_INT_STATUS: 0x%x\n", |
| cpu_int_status)); |
| |
| /* Clear the interrupt */ |
| pDev->IrqProcRegisters.cpu_int_status &= ~cpu_int_status; /* W1C */ |
| |
| /* set up the register transfer buffer to hit the register 4 times , this is done |
| * to make the access 4-byte aligned to mitigate issues with host bus interconnects that |
| * restrict bus transfer lengths to be a multiple of 4-bytes */ |
| |
| /* set W1C value to clear the interrupt, this hits the register first */ |
| regBuffer[0] = cpu_int_status; |
| /* the remaining 4 values are set to zero which have no-effect */ |
| regBuffer[1] = 0; |
| regBuffer[2] = 0; |
| regBuffer[3] = 0; |
| |
| status = HIFReadWrite(pDev->HIFDevice, |
| CPU_INT_STATUS_ADDRESS, |
| regBuffer, |
| 4, |
| HIF_WR_SYNC_BYTE_FIX, |
| NULL); |
| |
| A_ASSERT(status == A_OK); |
| return status; |
| } |
| |
| |
| static A_STATUS DevServiceErrorInterrupt(AR6K_DEVICE *pDev) |
| { |
| A_STATUS status; |
| A_UINT8 error_int_status; |
| A_UINT8 regBuffer[4]; |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Error Interrupt\n")); |
| error_int_status = pDev->IrqProcRegisters.error_int_status & 0x0F; |
| A_ASSERT(error_int_status); |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, |
| ("Valid interrupt source(s) in ERROR_INT_STATUS: 0x%x\n", |
| error_int_status)); |
| |
| if (ERROR_INT_STATUS_WAKEUP_GET(error_int_status)) { |
| /* Wakeup */ |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Error : Wakeup\n")); |
| } |
| |
| if (ERROR_INT_STATUS_RX_UNDERFLOW_GET(error_int_status)) { |
| /* Rx Underflow */ |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Error : Rx Underflow\n")); |
| } |
| |
| if (ERROR_INT_STATUS_TX_OVERFLOW_GET(error_int_status)) { |
| /* Tx Overflow */ |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Error : Tx Overflow\n")); |
| } |
| |
| /* Clear the interrupt */ |
| pDev->IrqProcRegisters.error_int_status &= ~error_int_status; /* W1C */ |
| |
| /* set up the register transfer buffer to hit the register 4 times , this is done |
| * to make the access 4-byte aligned to mitigate issues with host bus interconnects that |
| * restrict bus transfer lengths to be a multiple of 4-bytes */ |
| |
| /* set W1C value to clear the interrupt, this hits the register first */ |
| regBuffer[0] = error_int_status; |
| /* the remaining 4 values are set to zero which have no-effect */ |
| regBuffer[1] = 0; |
| regBuffer[2] = 0; |
| regBuffer[3] = 0; |
| |
| status = HIFReadWrite(pDev->HIFDevice, |
| ERROR_INT_STATUS_ADDRESS, |
| regBuffer, |
| 4, |
| HIF_WR_SYNC_BYTE_FIX, |
| NULL); |
| |
| A_ASSERT(status == A_OK); |
| return status; |
| } |
| |
| static A_STATUS DevServiceDebugInterrupt(AR6K_DEVICE *pDev) |
| { |
| A_UINT32 dummy; |
| A_STATUS status; |
| |
| /* Send a target failure event to the application */ |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Target debug interrupt\n")); |
| |
| if (pDev->TargetFailureCallback != NULL) { |
| pDev->TargetFailureCallback(pDev->HTCContext); |
| } |
| |
| if (pDev->GMboxEnabled) { |
| DevNotifyGMboxTargetFailure(pDev); |
| } |
| |
| /* clear the interrupt , the debug error interrupt is |
| * counter 0 */ |
| /* read counter to clear interrupt */ |
| status = HIFReadWrite(pDev->HIFDevice, |
| COUNT_DEC_ADDRESS, |
| (A_UINT8 *)&dummy, |
| 4, |
| HIF_RD_SYNC_BYTE_INC, |
| NULL); |
| |
| A_ASSERT(status == A_OK); |
| return status; |
| } |
| |
| static A_STATUS DevServiceCounterInterrupt(AR6K_DEVICE *pDev) |
| { |
| A_UINT8 counter_int_status; |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Counter Interrupt\n")); |
| |
| counter_int_status = pDev->IrqProcRegisters.counter_int_status & |
| pDev->IrqEnableRegisters.counter_int_status_enable; |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, |
| ("Valid interrupt source(s) in COUNTER_INT_STATUS: 0x%x\n", |
| counter_int_status)); |
| |
| /* Check if the debug interrupt is pending |
| * NOTE: other modules like GMBOX may use the counter interrupt for |
| * credit flow control on other counters, we only need to check for the debug assertion |
| * counter interrupt */ |
| if (counter_int_status & AR6K_TARGET_DEBUG_INTR_MASK) { |
| return DevServiceDebugInterrupt(pDev); |
| } |
| |
| return A_OK; |
| } |
| |
| /* callback when our fetch to get interrupt status registers completes */ |
| static void DevGetEventAsyncHandler(void *Context, HTC_PACKET *pPacket) |
| { |
| AR6K_DEVICE *pDev = (AR6K_DEVICE *)Context; |
| A_UINT32 lookAhead = 0; |
| A_BOOL otherInts = FALSE; |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevGetEventAsyncHandler: (dev: 0x%lX)\n", (unsigned long)pDev)); |
| |
| do { |
| |
| if (A_FAILED(pPacket->Status)) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, |
| (" GetEvents I/O request failed, status:%d \n", pPacket->Status)); |
| /* bail out, don't unmask HIF interrupt */ |
| break; |
| } |
| |
| if (pDev->GetPendingEventsFunc != NULL) { |
| /* the HIF layer collected the information for us */ |
| HIF_PENDING_EVENTS_INFO *pEvents = (HIF_PENDING_EVENTS_INFO *)pPacket->pBuffer; |
| if (pEvents->Events & HIF_RECV_MSG_AVAIL) { |
| lookAhead = pEvents->LookAhead; |
| if (0 == lookAhead) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" DevGetEventAsyncHandler1, lookAhead is zero! \n")); |
| } |
| } |
| if (pEvents->Events & HIF_OTHER_EVENTS) { |
| otherInts = TRUE; |
| } |
| } else { |
| /* standard interrupt table handling.... */ |
| AR6K_IRQ_PROC_REGISTERS *pReg = (AR6K_IRQ_PROC_REGISTERS *)pPacket->pBuffer; |
| A_UINT8 host_int_status; |
| |
| host_int_status = pReg->host_int_status & pDev->IrqEnableRegisters.int_status_enable; |
| |
| if (host_int_status & (1 << HTC_MAILBOX)) { |
| host_int_status &= ~(1 << HTC_MAILBOX); |
| if (pReg->rx_lookahead_valid & (1 << HTC_MAILBOX)) { |
| /* mailbox has a message and the look ahead is valid */ |
| lookAhead = pReg->rx_lookahead[HTC_MAILBOX]; |
| if (0 == lookAhead) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" DevGetEventAsyncHandler2, lookAhead is zero! \n")); |
| } |
| } |
| } |
| |
| if (host_int_status) { |
| /* there are other interrupts to handle */ |
| otherInts = TRUE; |
| } |
| } |
| |
| if (otherInts || (lookAhead == 0)) { |
| /* if there are other interrupts to process, we cannot do this in the async handler so |
| * ack the interrupt which will cause our sync handler to run again |
| * if however there are no more messages, we can now ack the interrupt */ |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, |
| (" Acking interrupt from DevGetEventAsyncHandler (otherints:%d, lookahead:0x%X)\n", |
| otherInts, lookAhead)); |
| HIFAckInterrupt(pDev->HIFDevice); |
| } else { |
| int fetched = 0; |
| A_STATUS status; |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, |
| (" DevGetEventAsyncHandler : detected another message, lookahead :0x%X \n", |
| lookAhead)); |
| /* lookahead is non-zero and there are no other interrupts to service, |
| * go get the next message */ |
| status = pDev->MessagePendingCallback(pDev->HTCContext, &lookAhead, 1, NULL, &fetched); |
| |
| if (A_SUCCESS(status) && !fetched) { |
| /* HTC layer could not pull out messages due to lack of resources, stop IRQ processing */ |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("MessagePendingCallback did not pull any messages, force-ack \n")); |
| DevAsyncIrqProcessComplete(pDev); |
| } |
| } |
| |
| } while (FALSE); |
| |
| /* free this IO packet */ |
| AR6KFreeIOPacket(pDev,pPacket); |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevGetEventAsyncHandler \n")); |
| } |
| |
| /* called by the HTC layer when it wants us to check if the device has any more pending |
| * recv messages, this starts off a series of async requests to read interrupt registers */ |
| A_STATUS DevCheckPendingRecvMsgsAsync(void *context) |
| { |
| AR6K_DEVICE *pDev = (AR6K_DEVICE *)context; |
| A_STATUS status = A_OK; |
| HTC_PACKET *pIOPacket; |
| |
| /* this is called in an ASYNC only context, we may NOT block, sleep or call any apis that can |
| * cause us to switch contexts */ |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevCheckPendingRecvMsgsAsync: (dev: 0x%lX)\n", (unsigned long)pDev)); |
| |
| do { |
| |
| if (HIF_DEVICE_IRQ_SYNC_ONLY == pDev->HifIRQProcessingMode) { |
| /* break the async processing chain right here, no need to continue. |
| * The DevDsrHandler() will handle things in a loop when things are driven |
| * synchronously */ |
| break; |
| } |
| |
| /* an optimization to bypass reading the IRQ status registers unecessarily which can re-wake |
| * the target, if upper layers determine that we are in a low-throughput mode, we can |
| * rely on taking another interrupt rather than re-checking the status registers which can |
| * re-wake the target */ |
| if (pDev->RecheckIRQStatusCnt == 0) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("Bypassing IRQ Status re-check, re-acking HIF interrupts\n")); |
| /* ack interrupt */ |
| HIFAckInterrupt(pDev->HIFDevice); |
| break; |
| } |
| |
| /* first allocate one of our HTC packets we created for async I/O |
| * we reuse HTC packet definitions so that we can use the completion mechanism |
| * in DevRWCompletionHandler() */ |
| pIOPacket = AR6KAllocIOPacket(pDev); |
| |
| if (NULL == pIOPacket) { |
| /* there should be only 1 asynchronous request out at a time to read these registers |
| * so this should actually never happen */ |
| status = A_NO_MEMORY; |
| A_ASSERT(FALSE); |
| break; |
| } |
| |
| /* stick in our completion routine when the I/O operation completes */ |
| pIOPacket->Completion = DevGetEventAsyncHandler; |
| pIOPacket->pContext = pDev; |
| |
| if (pDev->GetPendingEventsFunc) { |
| /* HIF layer has it's own mechanism, pass the IO to it.. */ |
| status = pDev->GetPendingEventsFunc(pDev->HIFDevice, |
| (HIF_PENDING_EVENTS_INFO *)pIOPacket->pBuffer, |
| pIOPacket); |
| |
| } else { |
| /* standard way, read the interrupt register table asynchronously again */ |
| status = HIFReadWrite(pDev->HIFDevice, |
| HOST_INT_STATUS_ADDRESS, |
| pIOPacket->pBuffer, |
| AR6K_IRQ_PROC_REGS_SIZE, |
| HIF_RD_ASYNC_BYTE_INC, |
| pIOPacket); |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,(" Async IO issued to get interrupt status...\n")); |
| } while (FALSE); |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevCheckPendingRecvMsgsAsync \n")); |
| |
| return status; |
| } |
| |
| void DevAsyncIrqProcessComplete(AR6K_DEVICE *pDev) |
| { |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("DevAsyncIrqProcessComplete - forcing HIF IRQ ACK \n")); |
| HIFAckInterrupt(pDev->HIFDevice); |
| } |
| |
| /* process pending interrupts synchronously */ |
| static A_STATUS ProcessPendingIRQs(AR6K_DEVICE *pDev, A_BOOL *pDone, A_BOOL *pASyncProcessing) |
| { |
| A_STATUS status = A_OK; |
| A_UINT8 host_int_status = 0; |
| A_UINT32 lookAhead = 0; |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+ProcessPendingIRQs: (dev: 0x%lX)\n", (unsigned long)pDev)); |
| |
| /*** NOTE: the HIF implementation guarantees that the context of this call allows |
| * us to perform SYNCHRONOUS I/O, that is we can block, sleep or call any API that |
| * can block or switch thread/task ontexts. |
| * This is a fully schedulable context. |
| * */ |
| do { |
| |
| if (pDev->IrqEnableRegisters.int_status_enable == 0) { |
| /* interrupt enables have been cleared, do not try to process any pending interrupts that |
| * may result in more bus transactions. The target may be unresponsive at this |
| * point. */ |
| break; |
| } |
| |
| if (pDev->GetPendingEventsFunc != NULL) { |
| HIF_PENDING_EVENTS_INFO events; |
| |
| #ifdef THREAD_X |
| events.Polling= 0; |
| #endif |
| /* the HIF layer uses a special mechanism to get events |
| * get this synchronously */ |
| status = pDev->GetPendingEventsFunc(pDev->HIFDevice, |
| &events, |
| NULL); |
| |
| if (A_FAILED(status)) { |
| break; |
| } |
| |
| if (events.Events & HIF_RECV_MSG_AVAIL) { |
| lookAhead = events.LookAhead; |
| if (0 == lookAhead) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" ProcessPendingIRQs1 lookAhead is zero! \n")); |
| } |
| } |
| |
| if (!(events.Events & HIF_OTHER_EVENTS) || |
| !(pDev->IrqEnableRegisters.int_status_enable & OTHER_INTS_ENABLED)) { |
| /* no need to read the register table, no other interesting interrupts. |
| * Some interfaces (like SPI) can shadow interrupt sources without |
| * requiring the host to do a full table read */ |
| break; |
| } |
| |
| /* otherwise fall through and read the register table */ |
| } |
| |
| /* |
| * Read the first 28 bytes of the HTC register table. This will yield us |
| * the value of different int status registers and the lookahead |
| * registers. |
| * length = sizeof(int_status) + sizeof(cpu_int_status) + |
| * sizeof(error_int_status) + sizeof(counter_int_status) + |
| * sizeof(mbox_frame) + sizeof(rx_lookahead_valid) + |
| * sizeof(hole) + sizeof(rx_lookahead) + |
| * sizeof(int_status_enable) + sizeof(cpu_int_status_enable) + |
| * sizeof(error_status_enable) + |
| * sizeof(counter_int_status_enable); |
| * |
| */ |
| #ifdef CONFIG_MMC_SDHCI_S3C |
| pDev->IrqProcRegisters.host_int_status = 0; |
| pDev->IrqProcRegisters.rx_lookahead_valid = 0; |
| pDev->IrqProcRegisters.host_int_status2 = 0; |
| pDev->IrqProcRegisters.rx_lookahead[0] = 0; |
| pDev->IrqProcRegisters.rx_lookahead[1] = 0xaaa5555; |
| #endif /* CONFIG_MMC_SDHCI_S3C */ |
| status = HIFReadWrite(pDev->HIFDevice, |
| HOST_INT_STATUS_ADDRESS, |
| (A_UINT8 *)&pDev->IrqProcRegisters, |
| AR6K_IRQ_PROC_REGS_SIZE, |
| HIF_RD_SYNC_BYTE_INC, |
| NULL); |
| |
| if (A_FAILED(status)) { |
| break; |
| } |
| |
| #ifdef ATH_DEBUG_MODULE |
| if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_IRQ)) { |
| DevDumpRegisters(pDev, |
| &pDev->IrqProcRegisters, |
| &pDev->IrqEnableRegisters); |
| } |
| #endif |
| |
| /* Update only those registers that are enabled */ |
| host_int_status = pDev->IrqProcRegisters.host_int_status & |
| pDev->IrqEnableRegisters.int_status_enable; |
| |
| if (NULL == pDev->GetPendingEventsFunc) { |
| /* only look at mailbox status if the HIF layer did not provide this function, |
| * on some HIF interfaces reading the RX lookahead is not valid to do */ |
| if (host_int_status & (1 << HTC_MAILBOX)) { |
| /* mask out pending mailbox value, we use "lookAhead" as the real flag for |
| * mailbox processing below */ |
| host_int_status &= ~(1 << HTC_MAILBOX); |
| if (pDev->IrqProcRegisters.rx_lookahead_valid & (1 << HTC_MAILBOX)) { |
| /* mailbox has a message and the look ahead is valid */ |
| lookAhead = pDev->IrqProcRegisters.rx_lookahead[HTC_MAILBOX]; |
| if (0 == lookAhead) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" ProcessPendingIRQs2, lookAhead is zero! \n")); |
| } |
| } |
| } |
| } else { |
| /* not valid to check if the HIF has another mechanism for reading mailbox pending status*/ |
| host_int_status &= ~(1 << HTC_MAILBOX); |
| } |
| |
| if (pDev->GMboxEnabled) { |
| /*call GMBOX layer to process any interrupts of interest */ |
| status = DevCheckGMboxInterrupts(pDev); |
| } |
| |
| } while (FALSE); |
| |
| |
| do { |
| |
| /* did the interrupt status fetches succeed? */ |
| if (A_FAILED(status)) { |
| break; |
| } |
| |
| if ((0 == host_int_status) && (0 == lookAhead)) { |
| /* nothing to process, the caller can use this to break out of a loop */ |
| *pDone = TRUE; |
| break; |
| } |
| |
| if (lookAhead != 0) { |
| int fetched = 0; |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("Pending mailbox message, LookAhead: 0x%X\n",lookAhead)); |
| /* Mailbox Interrupt, the HTC layer may issue async requests to empty the |
| * mailbox... |
| * When emptying the recv mailbox we use the async handler above called from the |
| * completion routine of the callers read request. This can improve performance |
| * by reducing context switching when we rapidly pull packets */ |
| status = pDev->MessagePendingCallback(pDev->HTCContext, &lookAhead, 1, pASyncProcessing, &fetched); |
| if (A_FAILED(status)) { |
| break; |
| } |
| |
| if (!fetched) { |
| /* HTC could not pull any messages out due to lack of resources */ |
| /* force DSR handler to ack the interrupt */ |
| *pASyncProcessing = FALSE; |
| pDev->RecheckIRQStatusCnt = 0; |
| } |
| } |
| |
| /* now handle the rest of them */ |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, |
| (" Valid interrupt source(s) for OTHER interrupts: 0x%x\n", |
| host_int_status)); |
| |
| if (HOST_INT_STATUS_CPU_GET(host_int_status)) { |
| /* CPU Interrupt */ |
| status = DevServiceCPUInterrupt(pDev); |
| if (A_FAILED(status)){ |
| break; |
| } |
| } |
| |
| if (HOST_INT_STATUS_ERROR_GET(host_int_status)) { |
| /* Error Interrupt */ |
| status = DevServiceErrorInterrupt(pDev); |
| if (A_FAILED(status)){ |
| break; |
| } |
| } |
| |
| if (HOST_INT_STATUS_COUNTER_GET(host_int_status)) { |
| /* Counter Interrupt */ |
| status = DevServiceCounterInterrupt(pDev); |
| if (A_FAILED(status)){ |
| break; |
| } |
| } |
| |
| } while (FALSE); |
| |
| /* an optimization to bypass reading the IRQ status registers unecessarily which can re-wake |
| * the target, if upper layers determine that we are in a low-throughput mode, we can |
| * rely on taking another interrupt rather than re-checking the status registers which can |
| * re-wake the target. |
| * |
| * NOTE : for host interfaces that use the special GetPendingEventsFunc, this optimization cannot |
| * be used due to possible side-effects. For example, SPI requires the host to drain all |
| * messages from the mailbox before exiting the ISR routine. */ |
| if (!(*pASyncProcessing) && (pDev->RecheckIRQStatusCnt == 0) && (pDev->GetPendingEventsFunc == NULL)) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("Bypassing IRQ Status re-check, forcing done \n")); |
| *pDone = TRUE; |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-ProcessPendingIRQs: (done:%d, async:%d) status=%d \n", |
| *pDone, *pASyncProcessing, status)); |
| |
| return status; |
| } |
| |
| |
| /* Synchronousinterrupt handler, this handler kicks off all interrupt processing.*/ |
| A_STATUS DevDsrHandler(void *context) |
| { |
| AR6K_DEVICE *pDev = (AR6K_DEVICE *)context; |
| A_STATUS status = A_OK; |
| A_BOOL done = FALSE; |
| A_BOOL asyncProc = FALSE; |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevDsrHandler: (dev: 0x%lX)\n", (unsigned long)pDev)); |
| |
| /* reset the recv counter that tracks when we need to yield from the DSR */ |
| pDev->CurrentDSRRecvCount = 0; |
| /* reset counter used to flag a re-scan of IRQ status registers on the target */ |
| pDev->RecheckIRQStatusCnt = 0; |
| |
| while (!done) { |
| status = ProcessPendingIRQs(pDev, &done, &asyncProc); |
| if (A_FAILED(status)) { |
| break; |
| } |
| |
| if (HIF_DEVICE_IRQ_SYNC_ONLY == pDev->HifIRQProcessingMode) { |
| /* the HIF layer does not allow async IRQ processing, override the asyncProc flag */ |
| asyncProc = FALSE; |
| /* this will cause us to re-enter ProcessPendingIRQ() and re-read interrupt status registers. |
| * this has a nice side effect of blocking us until all async read requests are completed. |
| * This behavior is required on some HIF implementations that do not allow ASYNC |
| * processing in interrupt handlers (like Windows CE) */ |
| |
| if (pDev->DSRCanYield && DEV_CHECK_RECV_YIELD(pDev)) { |
| /* ProcessPendingIRQs() pulled enough recv messages to satisfy the yield count, stop |
| * checking for more messages and return */ |
| break; |
| } |
| } |
| |
| if (asyncProc) { |
| /* the function performed some async I/O for performance, we |
| need to exit the ISR immediately, the check below will prevent the interrupt from being |
| Ack'd while we handle it asynchronously */ |
| break; |
| } |
| |
| } |
| |
| if (A_SUCCESS(status) && !asyncProc) { |
| /* Ack the interrupt only if : |
| * 1. we did not get any errors in processing interrupts |
| * 2. there are no outstanding async processing requests */ |
| if (pDev->DSRCanYield) { |
| /* if the DSR can yield do not ACK the interrupt, there could be more pending messages. |
| * The HIF layer must ACK the interrupt on behalf of HTC */ |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,(" Yield in effect (cur RX count: %d) \n", pDev->CurrentDSRRecvCount)); |
| } else { |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,(" Acking interrupt from DevDsrHandler \n")); |
| HIFAckInterrupt(pDev->HIFDevice); |
| } |
| } |
| |
| AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevDsrHandler \n")); |
| return status; |
| } |
| |
| #ifdef ATH_DEBUG_MODULE |
| void DumpAR6KDevState(AR6K_DEVICE *pDev) |
| { |
| A_STATUS status; |
| AR6K_IRQ_ENABLE_REGISTERS regs; |
| AR6K_IRQ_PROC_REGISTERS procRegs; |
| |
| LOCK_AR6K(pDev); |
| /* copy into our temp area */ |
| A_MEMCPY(®s,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE); |
| UNLOCK_AR6K(pDev); |
| |
| /* load the register table from the device */ |
| status = HIFReadWrite(pDev->HIFDevice, |
| HOST_INT_STATUS_ADDRESS, |
| (A_UINT8 *)&procRegs, |
| AR6K_IRQ_PROC_REGS_SIZE, |
| HIF_RD_SYNC_BYTE_INC, |
| NULL); |
| |
| if (A_FAILED(status)) { |
| AR_DEBUG_PRINTF(ATH_DEBUG_ERR, |
| ("DumpAR6KDevState : Failed to read register table (%d) \n",status)); |
| return; |
| } |
| |
| DevDumpRegisters(pDev,&procRegs,®s); |
| |
| if (pDev->GMboxInfo.pStateDumpCallback != NULL) { |
| pDev->GMboxInfo.pStateDumpCallback(pDev->GMboxInfo.pProtocolContext); |
| } |
| |
| /* dump any bus state at the HIF layer */ |
| HIFConfigureDevice(pDev->HIFDevice,HIF_DEVICE_DEBUG_BUS_STATE,NULL,0); |
| |
| } |
| #endif |
| |
| |