Google Git
Sign in
nest-open-source / nest-cam / v350 / atheros_tools / refs/heads/main / . / ath6kl-wmiconfig / include / wmi.h
blob: 8655a85ded2d7d7e72961f5cf70dbbefb62c3b82 [file] [log] [blame]
/*
* Copyright (c) 2012 Qualcomm Atheros, Inc..
* All Rights Reserved.
* Qualcomm Atheros Confidential and Proprietary.
*/
/*
* This file contains the definitions of the WMI protocol specified in the
* Wireless Module Interface (WMI). It includes definitions of all the
* commands and events. Commands are messages from the host to the WM.
* Events and Replies are messages from the WM to the host.
*
* Ownership of correctness in regards to commands
* belongs to the host driver and the WMI is not required to validate
* parameters for value, proper range, or any other checking.
*
*/
#ifndef _WMI_H_
#define _WMI_H_
#ifndef ATH_TARGET
//#include "athstartpack.h"
#endif
//#include "wmix.h"
//#include "wlan_defs.h"
//#include "dfs_common.h"
#ifdef __cplusplus
extern "C" {
#endif
#define HTC_PROTOCOL_VERSION 0x0002
#define HTC_PROTOCOL_REVISION 0x0000
#define WMI_PROTOCOL_VERSION 0x0002
#define WMI_PROTOCOL_REVISION 0x0000
#define ATH_MAC_LEN 6 /* length of mac in bytes */
#define WMI_CMD_MAX_LEN 100
#define WMI_CONTROL_MSG_MAX_LEN 256
#define WMI_OPT_CONTROL_MSG_MAX_LEN 1536
#define IS_ETHERTYPE(_typeOrLen) ((_typeOrLen) >= 0x0600)
#define RFC1042OUI {0x00, 0x00, 0x00}
#define IP_ETHERTYPE 0x0800
#define WMI_IMPLICIT_PSTREAM 0xFF
#define WMI_MAX_THINSTREAM 15
#ifdef AR6002_REV2
#define IBSS_MAX_NUM_STA 4
#else
#define IBSS_MAX_NUM_STA 8
#endif
#define WMI_MODE_MAX 8
#define WMI_MAX_RATE_MASK 2
#define WMI_NETWORK_TYPE(networkType) ((networkType) & 0x000F)
#define WMI_CONNECTED_PHYMODE(networkType) (((networkType) & 0x0F00) >> 8)
/* Max rates we'll handle */
#define WMI_RATE_MAXSIZE 15
/*
* These constants are used with A_WLAN_BAND_SET.
*/
#define A_BAND_24GHZ 0
#define A_BAND_5GHZ 1
#define A_NUM_BANDS 2
PREPACK struct host_app_area_s {
A_UINT32 wmi_protocol_ver;
} POSTPACK;
/*
* Data Path
*/
typedef PREPACK struct {
A_UINT8 dstMac[ATH_MAC_LEN];
A_UINT8 srcMac[ATH_MAC_LEN];
A_UINT16 typeOrLen;
} POSTPACK ATH_MAC_HDR;
typedef PREPACK struct {
A_UINT8 dsap;
A_UINT8 ssap;
A_UINT8 cntl;
A_UINT8 orgCode[3];
A_UINT16 etherType;
} POSTPACK ATH_LLC_SNAP_HDR;
typedef enum {
DATA_MSGTYPE = 0x0,
CNTL_MSGTYPE,
SYNC_MSGTYPE,
OPT_MSGTYPE,
} WMI_MSG_TYPE;
/*
* Macros for operating on WMI_DATA_HDR (info) field
*/
#define WMI_DATA_HDR_MSG_TYPE_MASK 0x03
#define WMI_DATA_HDR_MSG_TYPE_SHIFT 0
#define WMI_DATA_HDR_UP_MASK 0x07
#define WMI_DATA_HDR_UP_SHIFT 2
/* In AP mode, the same bit (b5) is used to indicate Power save state in
* the Rx dir and More data bit state in the tx direction.
*/
#define WMI_DATA_HDR_PS_MASK 0x1
#define WMI_DATA_HDR_PS_SHIFT 5
#define WMI_DATA_HDR_MORE_MASK 0x1
#define WMI_DATA_HDR_MORE_SHIFT 5
typedef enum {
WMI_DATA_HDR_DATA_TYPE_802_3 = 0,
WMI_DATA_HDR_DATA_TYPE_802_11,
WMI_DATA_HDR_DATA_TYPE_ACL,
} WMI_DATA_HDR_DATA_TYPE;
/* Bitmap of data header flags */
typedef enum {
WMI_DATA_HDR_FLAGS_MORE = 0x1,
WMI_DATA_HDR_FLAGS_EOSP = 0x2,
} WMI_DATA_HDR_FLAGS;
#define WMI_DATA_HDR_DATA_TYPE_MASK 0x3
#define WMI_DATA_HDR_DATA_TYPE_SHIFT 6
#define WMI_DATA_HDR_GET_RSSI(h) ((h)->rssi)
#define WMI_DATA_HDR_SET_MORE_BIT(h) ((h)->info |= (WMI_DATA_HDR_MORE_MASK << WMI_DATA_HDR_MORE_SHIFT))
#define WMI_DATA_HDR_HAS_MORE_BIT(h) ((h)->info & (WMI_DATA_HDR_MORE_MASK << WMI_DATA_HDR_MORE_SHIFT))
#define WMI_DATA_HDR_IS_MSG_TYPE(h, t) (((h)->info & (WMI_DATA_HDR_MSG_TYPE_MASK)) == (t))
#define WMI_DATA_HDR_SET_MSG_TYPE(h, t) (h)->info = (((h)->info & ~(WMI_DATA_HDR_MSG_TYPE_MASK << WMI_DATA_HDR_MSG_TYPE_SHIFT)) | (t << WMI_DATA_HDR_MSG_TYPE_SHIFT))
#define WMI_DATA_HDR_GET_UP(h) (((h)->info >> WMI_DATA_HDR_UP_SHIFT) & WMI_DATA_HDR_UP_MASK)
#define WMI_DATA_HDR_SET_UP(h, p) (h)->info = (((h)->info & ~(WMI_DATA_HDR_UP_MASK << WMI_DATA_HDR_UP_SHIFT)) | (p << WMI_DATA_HDR_UP_SHIFT))
#define WMI_DATA_HDR_GET_DATA_TYPE(h) (((h)->info >> WMI_DATA_HDR_DATA_TYPE_SHIFT) & WMI_DATA_HDR_DATA_TYPE_MASK)
#define WMI_DATA_HDR_SET_DATA_TYPE(h, p) (h)->info = (((h)->info & ~(WMI_DATA_HDR_DATA_TYPE_MASK << WMI_DATA_HDR_DATA_TYPE_SHIFT)) | ((p) << WMI_DATA_HDR_DATA_TYPE_SHIFT))
#define WMI_DATA_HDR_GET_DOT11(h) (WMI_DATA_HDR_GET_DATA_TYPE((h)) == WMI_DATA_HDR_DATA_TYPE_802_11)
#define WMI_DATA_HDR_SET_DOT11(h, p) WMI_DATA_HDR_SET_DATA_TYPE((h), (p))
/* Macros for operating on WMI_DATA_HDR (info2) field */
#define WMI_DATA_HDR_SEQNO_MASK 0xFFF
#define WMI_DATA_HDR_SEQNO_SHIFT 0
#define WMI_DATA_HDR_AMSDU_MASK 0x1
#define WMI_DATA_HDR_AMSDU_SHIFT 12
#define WMI_DATA_HDR_META_MASK 0x7
#define WMI_DATA_HDR_META_SHIFT 13
#define GET_SEQ_NO(_v) ((_v) & WMI_DATA_HDR_SEQNO_MASK)
#define GET_ISMSDU(_v) ((_v) & WMI_DATA_HDR_AMSDU_MASK)
#define WMI_DATA_HDR_GET_SEQNO(h) GET_SEQ_NO((h)->info2 >> WMI_DATA_HDR_SEQNO_SHIFT)
#define WMI_DATA_HDR_SET_SEQNO(h, _v) ((h)->info2 = ((h)->info2 & ~(WMI_DATA_HDR_SEQNO_MASK << WMI_DATA_HDR_SEQNO_SHIFT)) | (GET_SEQ_NO(_v) << WMI_DATA_HDR_SEQNO_SHIFT))
#define WMI_DATA_HDR_IS_AMSDU(h) GET_ISMSDU((h)->info2 >> WMI_DATA_HDR_AMSDU_SHIFT)
#define WMI_DATA_HDR_SET_AMSDU(h, _v) ((h)->info2 = ((h)->info2 & ~(WMI_DATA_HDR_AMSDU_MASK << WMI_DATA_HDR_AMSDU_SHIFT)) | (GET_ISMSDU(_v) << WMI_DATA_HDR_AMSDU_SHIFT))
#define WMI_DATA_HDR_GET_META(h) (((h)->info2 >> WMI_DATA_HDR_META_SHIFT) & WMI_DATA_HDR_META_MASK)
#define WMI_DATA_HDR_SET_META(h, _v) ((h)->info2 = ((h)->info2 & ~(WMI_DATA_HDR_META_MASK << WMI_DATA_HDR_META_SHIFT)) | ((_v) << WMI_DATA_HDR_META_SHIFT))
/* Macros for operating on WMI_DATA_HDR (info3) field */
#define WMI_DATA_HDR_DEVID_MASK 0xF
#define WMI_DATA_HDR_DEVID_SHIFT 0
#define GET_DEVID(_v) ((_v) & WMI_DATA_HDR_DEVID_MASK)
#define WMI_DATA_HDR_GET_DEVID(h) (((h)->info3 >> WMI_DATA_HDR_DEVID_SHIFT) & WMI_DATA_HDR_DEVID_MASK)
#define WMI_DATA_HDR_SET_DEVID(h, _v) ((h)->info3 = ((h)->info3 & ~(WMI_DATA_HDR_DEVID_MASK << WMI_DATA_HDR_DEVID_SHIFT)) | (GET_DEVID(_v) << WMI_DATA_HDR_DEVID_SHIFT))
#define WMI_DATA_HDR_RXFILT_SHIFT 4
#define WMI_DATA_HDR_RXFILT_MASK (0x1 << WMI_DATA_HDR_RXFILT_SHIFT)
#define WMI_DATA_HDR_IS_RXFILTERED(h) ((h)->info3 & WMI_DATA_HDR_RXFILT_MASK)
#define SET_WMI_DATA_HDR_RXFILTERED(h) (h)->info3 |= WMI_DATA_HDR_RXFILT_MASK
#define WMI_DATA_HDR_TRIGGER_MASK 0x1
#define WMI_DATA_HDR_TRIGGER_SHIFT 4
#define WMI_DATA_HDR_SET_TRIGGER(h, _v) ((h)->info3 = ((h)->info3 & ~(WMI_DATA_HDR_TRIGGER_MASK << WMI_DATA_HDR_TRIGGER_SHIFT)) | ((_v) << WMI_DATA_HDR_TRIGGER_SHIFT))
#define WMI_DATA_HDR_IS_TRIGGER(h) ((((h)->info3 >> WMI_DATA_HDR_TRIGGER_SHIFT) & WMI_DATA_HDR_TRIGGER_MASK) == WMI_DATA_HDR_TRIGGER_MASK)
#define WMI_DATA_HDR_EOSP_MASK WMI_DATA_HDR_TRIGGER_MASK
#define WMI_DATA_HDR_EOSP_SHIFT WMI_DATA_HDR_TRIGGER_SHIFT
#define WMI_DATA_HDR_SET_EOSP_BIT(h) ((h)->info3 |= (WMI_DATA_HDR_EOSP_MASK << WMI_DATA_HDR_EOSP_SHIFT))
#define WMI_DATA_HDR_HAS_EOSP_BIT(h) ((h)->info3 & (WMI_DATA_HDR_EOSP_MASK << WMI_DATA_HDR_EOSP_SHIFT))
#define WMI_DATA_HDR_CCX_LINKTEST_MASK 0x1
#define WMI_DATA_HDR_CCX_LINKTEST_SHIFT 5
#define WMI_DATA_HDR_SET_CCX_LINKTEST_BIT(h) ((h)->info3 |= (WMI_DATA_HDR_CCX_LINKTEST_MASK << WMI_DATA_HDR_CCX_LINKTEST_SHIFT))
#define WMI_DATA_HDR_HAS_CCX_LINKTEST_BIT(h) ((h)->info3 & (WMI_DATA_HDR_CCX_LINKTEST_MASK << WMI_DATA_HDR_CCX_LINKTEST_SHIFT))
#define WMI_DATA_HDR_PAD_BEFORE_DATA_MASK 0xFF
#define WMI_DATA_HDR_PAD_BEFORE_DATA_SHIFT 0x8
#define GET_PAD_BEFORE_DATA_START(_v) ((_v) & WMI_DATA_HDR_PAD_BEFORE_DATA_MASK)
#define WMI_DATA_HDR_GET_PAD_BEFORE_DATA_START(h) (((h)->info3 >> WMI_DATA_HDR_PAD_BEFORE_DATA_SHIFT) & WMI_DATA_HDR_PAD_BEFORE_DATA_MASK)
#define WMI_DATA_HDR_SET_PAD_BEFORE_DATA_START(h, _v) ((h)->info3 = ((h)->info3 & ~(WMI_DATA_HDR_PAD_BEFORE_DATA_MASK << WMI_DATA_HDR_PAD_BEFORE_DATA_SHIFT)) | (GET_PAD_BEFORE_DATA_START(_v) << WMI_DATA_HDR_PAD_BEFORE_DATA_SHIFT))
typedef PREPACK struct {
A_INT8 rssi;
A_UINT8 info; /* usage of 'info' field(8-bit):
* b1:b0 - WMI_MSG_TYPE
* b4:b3:b2 - UP(tid)
* b5 - Used in AP mode. More-data in tx dir, PS in rx.
* b7:b6 - Dot3 header(0),
* Dot11 Header(1),
* ACL data(2)
*/
A_UINT16 info2; /* usage of 'info2' field(16-bit):
* b11:b0 - seq_no
* b12 - A-MSDU?
* b15:b13 - META_DATA_VERSION 0 - 7
*/
A_UINT16 info3; /* b3:b2:b1:b0 - device id
* b4 - Used in AP mode. uAPSD trigger in rx, EOSP in tx
* b7:b5 - unused?
* b15:b8 - pad before data start(irrespective of meta version)
*/
} POSTPACK WMI_DATA_HDR;
/*
* TX META VERSION DEFINITIONS
*/
#define WMI_MAX_TX_META_SZ (12)
#define WMI_MAX_TX_META_VERSION (7)
#define WMI_META_VERSION_1 (0x01)
#define WMI_META_VERSION_2 (0X02)
#define WMI_META_VERSION_3 (0x03)
#define WMI_META_VERSION_4 (0x04)
#define WMI_ACL_TO_DOT11_HEADROOM 36
#if 0 /* removed to prevent compile errors for WM.. */
typedef PREPACK struct {
/* intentionally empty. Default version is no meta data. */
} POSTPACK WMI_TX_META_V0;
#endif
typedef PREPACK struct {
A_UINT8 pktID; /* The packet ID to identify the tx request */
A_UINT8 ratePolicyID; /* The rate policy to be used for the tx of this frame */
} POSTPACK WMI_TX_META_V1;
#define WMI_CSUM_DIR_TX (0x1)
#define TX_CSUM_CALC_FILL (0x1)
typedef PREPACK struct {
A_UINT8 csumStart; /*Offset from start of the Payload(SNAP header) for csum calculation to begin */
A_UINT8 csumDest; /*Offset from start of Payload(SNAP header) where final csum goes*/
A_UINT8 csumFlags; /*Flag for check sum engine to be offloaded to device*/
} POSTPACK WMI_TX_META_V2;
/* WMI_META_TX_FLAG... are used as TX qualifiers for frames containing WMI_TX_RATE_SCHEDULE in the
* meta data. 0 or more of these flags should be assigned to the flags member of the schedule. */
#define WMI_META_TX_FLAG_ACK 0x01 // frame needs ACK response from receiver
#define WMI_META_TX_FLAG_SET_RETRY_BIT 0x02 // device will set retry bit in MAC header for retried frames.
#define WMI_META_TX_FLAG_SET_DURATION 0x04 // device will fill duration field in MAC header
/* NOTE: If WMI_META_TX_FLAG_USE_PREFIX == 0 device will NOT use prefix frame.
* If WMI_META_TX_FLAG_USE_PREFIX == 1 && WMI_META_TX_FLAG_PREFIX_RTS == 0 device will use CTS prefix.
* If WMI_META_TX_FLAG_USE_PREFIX == 1 && WMI_META_TX_FLAG_PREFIX_RTS == 1 device will use RTS prefix.
*/
#define WMI_META_TX_FLAG_USE_PREFIX 0x08 // device will send either RTS or CTS frame prior to subject frame.
#define WMI_META_TX_FLAG_PREFIX_RTS 0x10 // device will send RTS and wait for CTS prior to sending subject frame.
#define WMI_META_TX_LOAD_TSF 0x20 // device will fill the TSF field during transmit procedure. <Beacons/probe responses>
/* WMI_TX_RATE_SCHEDULE - Acts as a host-provided rate schedule to replace what would be normally determined
* by firmware. This allows the host to specify what rates and attempts should be used to transmit the
* frame. */
typedef PREPACK struct {
#define WMI_TX_MAX_RATE_SERIES (4)
A_UINT8 rateSeries[WMI_TX_MAX_RATE_SERIES]; //rate index for each series. first invalid rate terminates series.
A_UINT8 trySeries[WMI_TX_MAX_RATE_SERIES]; //number of tries for each series.
A_UINT8 flags; // combination of WMI_META_TX_FLAG...
A_UINT8 accessCategory; // should be WMM_AC_BE for managment frames and multicast frames.
//A_UINT8 keyIndex;
//
}POSTPACK WMI_TX_RATE_SCHEDULE;
#ifdef TIME_BASED_DISCARD
typedef PREPACK struct {
A_UINT32 txdiscardTime;
A_UINT8 discardDispostion;
} POSTPACK WMI_TX_META_V4;
#endif
typedef PREPACK struct {
WMI_TX_RATE_SCHEDULE rateSched;
A_UINT8 pktID; /* The packet ID to identify the tx request */
} POSTPACK WMI_TX_META_V3;
/*
* RX META VERSION DEFINITIONS
*/
/* if RX meta data is present at all then the meta data field
* will consume WMI_MAX_RX_META_SZ bytes of space between the
* WMI_DATA_HDR and the payload. How much of the available
* Meta data is actually used depends on which meta data
* version is active. */
#define WMI_MAX_RX_META_SZ (12)
#define WMI_MAX_RX_META_VERSION (7)
#define WMI_RX_STATUS_OK 0 /* success */
#define WMI_RX_STATUS_DECRYPT_ERR 1 /* decrypt error */
#define WMI_RX_STATUS_MIC_ERR 2 /* tkip MIC error */
#define WMI_RX_STATUS_ERR 3 /* undefined error */
#define WMI_RX_FLAGS_AGGR 0x0001 /* part of AGGR */
#define WMI_RX_FlAGS_STBC 0x0002 /* used STBC */
#define WMI_RX_FLAGS_SGI 0x0004 /* used SGI */
#define WMI_RX_FLAGS_HT 0x0008 /* is HT packet */
/* the flags field is also used to store the CRYPTO_TYPE of the frame
* that value is shifted by WMI_RX_FLAGS_CRYPTO_SHIFT */
#define WMI_RX_FLAGS_CRYPTO_SHIFT 4
#define WMI_RX_FLAGS_CRYPTO_MASK 0x1f
#define WMI_RX_META_GET_CRYPTO(flags) (((flags) >> WMI_RX_FLAGS_CRYPTO_SHIFT) & WMI_RX_FLAGS_CRYPTO_MASK)
#if 0 /* removed to prevent compile errors for WM.. */
typedef PREPACK struct {
/* intentionally empty. Default version is no meta data. */
} POSTPACK WMI_RX_META_VERSION_0;
#endif
typedef PREPACK struct {
A_UINT8 status; /* one of WMI_RX_STATUS_... */
A_UINT8 rix; /* rate index mapped to rate at which this packet was received. */
A_UINT8 rssi; /* rssi of packet */
A_UINT8 channel;/* rf channel during packet reception */
A_UINT16 flags; /* a combination of WMI_RX_FLAGS_... */
} POSTPACK WMI_RX_META_V1;
#define RX_CSUM_VALID_FLAG (0x1)
typedef PREPACK struct {
A_UINT16 csum;
A_UINT8 csumFlags;/* bit 0 set -partial csum valid
bit 1 set -test mode */
} POSTPACK WMI_RX_META_V2;
#ifdef TIME_BASED_DISCARD
typedef PREPACK struct {
A_UINT8 discardDispostion;
A_UINT32 txdiscardTime;
} POSTPACK WMI_RX_META_V4;
#endif
#define WMI_GET_DEVICE_ID(info1) ((info1) & 0xF)
/* Macros for operating on WMI_CMD_HDR (info1) field */
#define WMI_CMD_HDR_DEVID_MASK 0xF
#define WMI_CMD_HDR_DEVID_SHIFT 0
#define GET_CMD_DEVID(_v) ((_v) & WMI_CMD_HDR_DEVID_MASK)
#define WMI_CMD_HDR_GET_DEVID(h) (((h)->info1 >> WMI_CMD_HDR_DEVID_SHIFT) & WMI_CMD_HDR_DEVID_MASK)
#define WMI_CMD_HDR_SET_DEVID(h, _v) ((h)->info1 = ((h)->info1 & ~(WMI_CMD_HDR_DEVID_MASK << WMI_CMD_HDR_DEVID_SHIFT)) | (GET_CMD_DEVID(_v) << WMI_CMD_HDR_DEVID_SHIFT))
/*
* Control Path
*/
typedef PREPACK struct {
A_UINT16 commandId;
/*
* info1 - 16 bits
* b03:b00 - id
* b15:b04 - unused
*/
A_UINT16 info1;
A_UINT16 reserved; /* For alignment */
} POSTPACK WMI_CMD_HDR; /* used for commands and events */
/*
* List of Commnands
*/
typedef enum {
WMI_CONNECT_CMDID = 0x0001,
WMI_RECONNECT_CMDID,
WMI_DISCONNECT_CMDID,
WMI_SYNCHRONIZE_CMDID,
WMI_CREATE_PSTREAM_CMDID,
WMI_DELETE_PSTREAM_CMDID,
/* WMI_START_SCAN_CMDID is to be deprecated; WMI_BEGIN_SCAN is to
* be used instead. The new command supports P2P mgmt operations
* using station interface.
*/
WMI_START_SCAN_CMDID,
WMI_SET_SCAN_PARAMS_CMDID,
WMI_SET_BSS_FILTER_CMDID,
WMI_SET_PROBED_SSID_CMDID, /* 10 */
WMI_SET_LISTEN_INT_CMDID,
WMI_SET_BMISS_TIME_CMDID,
WMI_SET_DISC_TIMEOUT_CMDID,
WMI_GET_CHANNEL_LIST_CMDID,
WMI_SET_BEACON_INT_CMDID,
WMI_GET_STATISTICS_CMDID,
WMI_SET_CHANNEL_PARAMS_CMDID,
WMI_SET_POWER_MODE_CMDID,
WMI_SET_IBSS_PM_CAPS_CMDID,
WMI_SET_POWER_PARAMS_CMDID, /* 20 */
WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID,
WMI_ADD_CIPHER_KEY_CMDID,
WMI_DELETE_CIPHER_KEY_CMDID,
WMI_ADD_KRK_CMDID,
WMI_DELETE_KRK_CMDID,
WMI_SET_PMKID_CMDID,
WMI_SET_TX_PWR_CMDID,
WMI_GET_TX_PWR_CMDID,
WMI_SET_ASSOC_INFO_CMDID,
WMI_ADD_BAD_AP_CMDID, /* 30 */
WMI_DELETE_BAD_AP_CMDID,
WMI_SET_TKIP_COUNTERMEASURES_CMDID,
WMI_RSSI_THRESHOLD_PARAMS_CMDID,
WMI_TARGET_ERROR_REPORT_BITMASK_CMDID,
WMI_SET_ACCESS_PARAMS_CMDID,
WMI_SET_RETRY_LIMITS_CMDID,
WMI_SET_OPT_MODE_CMDID,
WMI_OPT_TX_FRAME_CMDID,
WMI_SET_VOICE_PKT_SIZE_CMDID,
WMI_SET_MAX_SP_LEN_CMDID, /* 40 */
WMI_SET_ROAM_CTRL_CMDID,
WMI_GET_ROAM_TBL_CMDID,
WMI_GET_ROAM_DATA_CMDID,
WMI_ENABLE_RM_CMDID,
WMI_SET_MAX_OFFHOME_DURATION_CMDID,
WMI_EXTENSION_CMDID, /* Non-wireless extensions */
WMI_SNR_THRESHOLD_PARAMS_CMDID,
WMI_LQ_THRESHOLD_PARAMS_CMDID,
WMI_SET_LPREAMBLE_CMDID,
WMI_SET_RTS_CMDID, /* 50 */
WMI_CLR_RSSI_SNR_CMDID,
WMI_SET_FIXRATES_CMDID,
WMI_GET_FIXRATES_CMDID,
WMI_SET_AUTH_MODE_CMDID,
WMI_SET_REASSOC_MODE_CMDID,
WMI_SET_WMM_CMDID,
WMI_SET_WMM_TXOP_CMDID,
WMI_TEST_CMDID,
/* COEX AR6002 only*/
WMI_SET_BT_STATUS_CMDID,
WMI_SET_BT_PARAMS_CMDID, /* 60 */
WMI_SET_KEEPALIVE_CMDID,
WMI_GET_KEEPALIVE_CMDID,
WMI_SET_APPIE_CMDID,
WMI_GET_APPIE_CMDID,
WMI_SET_WSC_STATUS_CMDID,
/* Wake on Wireless */
WMI_SET_HOST_SLEEP_MODE_CMDID,
WMI_SET_WOW_MODE_CMDID,
WMI_GET_WOW_LIST_CMDID,
WMI_ADD_WOW_PATTERN_CMDID,
WMI_DEL_WOW_PATTERN_CMDID, /* 70 */
WMI_SET_FRAMERATES_CMDID,
WMI_SET_AP_PS_CMDID,
WMI_SET_QOS_SUPP_CMDID,
/* WMI_THIN_RESERVED_... mark the start and end
* values for WMI_THIN_RESERVED command IDs. These
* command IDs can be found in wmi_thin.h */
WMI_THIN_RESERVED_START = 0x8000,
WMI_THIN_RESERVED_END = 0x8fff,
/*
* Developer commands starts at 0xF000
*/
WMI_SET_BITRATE_CMDID = 0xF000,
WMI_GET_BITRATE_CMDID,
WMI_SET_WHALPARAM_CMDID,
/*Should add the new command to the tail for compatible with
* etna.
*/
WMI_SET_MAC_ADDRESS_CMDID,
WMI_SET_AKMP_PARAMS_CMDID,
WMI_SET_PMKID_LIST_CMDID,
WMI_GET_PMKID_LIST_CMDID,
WMI_ABORT_SCAN_CMDID,
WMI_SET_TARGET_EVENT_REPORT_CMDID,
// Unused
WMI_UNUSED1,
WMI_UNUSED2,
/*
* AP mode commands
*/
WMI_AP_HIDDEN_SSID_CMDID, /* F00B */
WMI_AP_SET_NUM_STA_CMDID,
WMI_AP_ACL_POLICY_CMDID,
WMI_AP_ACL_MAC_LIST_CMDID,
WMI_AP_CONFIG_COMMIT_CMDID,
WMI_AP_SET_MLME_CMDID, /* F010 */
WMI_AP_SET_PVB_CMDID,
WMI_AP_CONN_INACT_CMDID,
WMI_AP_PROT_SCAN_TIME_CMDID,
WMI_AP_SET_COUNTRY_CMDID,
WMI_AP_SET_DTIM_CMDID,
WMI_AP_MODE_STAT_CMDID,
WMI_SET_IP_CMDID, /* F017 */
WMI_SET_PARAMS_CMDID,
WMI_SET_MCAST_FILTER_CMDID,
WMI_DEL_MCAST_FILTER_CMDID,
WMI_ALLOW_AGGR_CMDID, /* F01B */
WMI_ADDBA_REQ_CMDID,
WMI_DELBA_REQ_CMDID,
WMI_SET_HT_CAP_CMDID,
WMI_SET_HT_OP_CMDID,
WMI_SET_TX_SELECT_RATES_CMDID,
WMI_SET_TX_SGI_PARAM_CMDID,
WMI_SET_RATE_POLICY_CMDID,
WMI_HCI_CMD_CMDID, /* F023 */
WMI_RX_FRAME_FORMAT_CMDID,
WMI_SET_THIN_MODE_CMDID,
WMI_SET_BT_WLAN_CONN_PRECEDENCE_CMDID,
WMI_AP_SET_11BG_RATESET_CMDID, /* F027 */
WMI_SET_PMK_CMDID,
WMI_MCAST_FILTER_CMDID,
/* COEX CMDID AR6003*/
WMI_SET_BTCOEX_FE_ANT_CMDID, /* F02A */
WMI_SET_BTCOEX_COLOCATED_BT_DEV_CMDID,
WMI_SET_BTCOEX_SCO_CONFIG_CMDID,
WMI_SET_BTCOEX_A2DP_CONFIG_CMDID,
WMI_SET_BTCOEX_ACLCOEX_CONFIG_CMDID,
WMI_SET_BTCOEX_BTINQUIRY_PAGE_CONFIG_CMDID,
WMI_SET_BTCOEX_DEBUG_CMDID,
WMI_SET_BTCOEX_BT_OPERATING_STATUS_CMDID,
WMI_GET_BTCOEX_STATS_CMDID,
WMI_GET_BTCOEX_CONFIG_CMDID,
#if !defined(AR6002_REV61) || !defined(ATH_TARGET) /* WAR for EV 89272 */
WMI_DFS_RESERVED, /* F034 */
#endif
WMI_SET_DFS_MINRSSITHRESH_CMDID,
WMI_SET_DFS_MAXPULSEDUR_CMDID,
WMI_DFS_RADAR_DETECTED_CMDID,
/* P2P CMDS */
WMI_P2P_SET_CONFIG_CMDID, /* F037 */
WMI_WPS_SET_CONFIG_CMDID,
WMI_SET_REQ_DEV_ATTR_CMDID,
WMI_P2P_FIND_CMDID,
WMI_P2P_STOP_FIND_CMDID,
WMI_P2P_GO_NEG_START_CMDID,
WMI_P2P_LISTEN_CMDID,
WMI_CONFIG_TX_MAC_RULES_CMDID, /* F044 */
WMI_SET_PROMISCUOUS_MODE_CMDID,
WMI_RX_FRAME_FILTER_CMDID,
WMI_SET_CHANNEL_CMDID,
/* WAC commands */
WMI_ENABLE_WAC_CMDID,
WMI_WAC_SCAN_REPLY_CMDID,
WMI_WAC_CTRL_REQ_CMDID,
WMI_SET_DIV_PARAMS_CMDID,
WMI_GET_PMK_CMDID,
WMI_SET_PASSPHRASE_CMDID,
WMI_SEND_ASSOC_RES_CMDID,
WMI_SET_ASSOC_REQ_RELAY_CMDID,
/* ACS command, consists of sub-commands */
WMI_ACS_CTRL_CMDID,
WMI_SET_EXCESS_TX_RETRY_THRES_CMDID,
WMI_SET_TBD_TIME_CMDID, /*added for wmiconfig command for TBD */
/* Pktlog cmds */
WMI_PKTLOG_ENABLE_CMDID,
WMI_PKTLOG_DISABLE_CMDID,
/* More P2P Cmds */
WMI_P2P_GO_NEG_REQ_RSP_CMDID,
WMI_P2P_GRP_INIT_CMDID,
WMI_P2P_GRP_FORMATION_DONE_CMDID,
WMI_P2P_INVITE_CMDID,
WMI_P2P_INVITE_REQ_RSP_CMDID,
WMI_P2P_PROV_DISC_REQ_CMDID,
WMI_P2P_SET_CMDID,
WMI_GET_RFKILL_MODE_CMDID,
WMI_SET_RFKILL_MODE_CMDID,
WMI_AP_SET_APSD_CMDID,
WMI_AP_APSD_BUFFERED_TRAFFIC_CMDID,
WMI_P2P_SDPD_TX_CMDID, /* F05C */
WMI_P2P_STOP_SDPD_CMDID,
WMI_P2P_CANCEL_CMDID,
/* Ultra low power store / recall commands */
WMI_STORERECALL_CONFIGURE_CMDID,
WMI_STORERECALL_RECALL_CMDID,
WMI_STORERECALL_HOST_READY_CMDID,
WMI_FORCE_TARGET_ASSERT_CMDID,
WMI_SET_PROBED_SSID_EX_CMDID,
WMI_SET_NETWORK_LIST_OFFLOAD_CMDID,
WMI_SET_ARP_NS_OFFLOAD_CMDID,
WMI_ADD_WOW_EXT_PATTERN_CMDID,
WMI_GTK_OFFLOAD_OP_CMDID,
WMI_REMAIN_ON_CHNL_CMDID,
WMI_CANCEL_REMAIN_ON_CHNL_CMDID,
/* WMI_SEND_ACTION_CMDID is to be deprecated; WMI_SEND_MGMT_CMDID
* is to be used instead. The new command supports P2P mgmt
* operations using station interface
*/
WMI_SEND_ACTION_CMDID,
WMI_PROBE_REQ_REPORT_CMDID,
WMI_DISABLE_11B_RATES_CMDID,
WMI_SEND_PROBE_RESPONSE_CMDID,
WMI_GET_P2P_INFO_CMDID,
WMI_AP_JOIN_BSS_CMDID,
WMI_SMPS_ENABLE_CMDID,
WMI_SMPS_CONFIG_CMDID,
WMI_SET_RATECTRL_PARM_CMDID,
/* LPL specific commands*/
WMI_LPL_FORCE_ENABLE_CMDID,
WMI_LPL_SET_POLICY_CMDID,
WMI_LPL_GET_POLICY_CMDID,
WMI_LPL_GET_HWSTATE_CMDID,
WMI_LPL_SET_PARAMS_CMDID,
WMI_LPL_GET_PARAMS_CMDID,
WMI_SET_BUNDLE_PARAM_CMDID,
/*GreenTx specific commands*/
WMI_GREENTX_PARAMS_CMDID,
WMI_RTT_MEASREQ_CMDID,
WMI_RTT_CAPREQ_CMDID,
WMI_RTT_STATUSREQ_CMDID,
/* WPS Commands */
WMI_WPS_START_CMDID,
WMI_GET_WPS_STATUS_CMDID,
/* More P2P commands */
WMI_SET_NOA_CMDID,
WMI_GET_NOA_CMDID,
WMI_SET_OPPPS_CMDID,
WMI_GET_OPPPS_CMDID,
WMI_ADD_PORT_CMDID,
WMI_DEL_PORT_CMDID,
/* 802.11w cmd */
WMI_SET_RSN_CAP_CMDID,
WMI_GET_RSN_CAP_CMDID,
WMI_SET_IGTK_CMDID,
WMI_RX_FILTER_COALESCE_FILTER_OP_CMDID,
WMI_RX_FILTER_SET_FRAME_TEST_LIST_CMDID,
/* Commands added to support P2P mgmt operations on top of station
* interface. WMI_SEND_ACTION_CMDID and WMI_START_SCAN_CMDID to be
* deprecated.
*/
WMI_SEND_MGMT_CMDID,
WMI_BEGIN_SCAN_CMDID,
/* End of commands added to support P2P mgmt operations on station
* interface
*/
WMI_SET_BLACK_LIST,
WMI_SET_MCASTRATE_CMDID,
WMI_STA_BMISS_ENHANCE_CMDID,
WMI_SET_REGDOMAIN_CMDID,
WMI_SET_RSSI_FILTER_CMDID,
WMI_SET_KEEPALIVE_CMDID_EXT,
WMI_VOICE_DETECTION_ENABLE_CMDID,
WMI_SET_TXE_NOTIFY_CMDID,
WMI_SET_RECOVERY_TEST_PARAMETER_CMDID,
WMI_ENABLE_SCHED_SCAN,
WMI_DISABLE_BCAST_IN_PM_CMDID = 0xf200,
} WMI_COMMAND_ID;
/*
* Frame Types
*/
typedef enum {
WMI_FRAME_BEACON = 0,
WMI_FRAME_PROBE_REQ,
WMI_FRAME_PROBE_RESP,
WMI_FRAME_ASSOC_REQ,
WMI_FRAME_ASSOC_RESP,
WMI_NUM_MGMT_FRAME
} WMI_MGMT_FRAME_TYPE;
/*
* Connect Command
*/
typedef enum {
INFRA_NETWORK = 0x01,
ADHOC_NETWORK = 0x02,
ADHOC_CREATOR = 0x04,
AP_NETWORK = 0x10,
NETWORK_CONNECTED_USING_WPS = 0x20,
} NETWORK_TYPE;
typedef enum {
SUBTYPE_NONE,
SUBTYPE_BT,
SUBTYPE_P2PDEV,
SUBTYPE_P2PCLIENT,
SUBTYPE_P2PGO,
} NETWORK_SUBTYPE;
typedef enum {
OPEN_AUTH = 0x01,
SHARED_AUTH = 0x02,
LEAP_AUTH = 0x04, /* different from IEEE_AUTH_MODE definitions */
} DOT11_AUTH_MODE;
typedef enum {
WMI_NONE_AUTH = 0x01,
WMI_WPA_AUTH = 0x02,
WMI_WPA2_AUTH = 0x04,
WMI_WPA_PSK_AUTH = 0x08,
WMI_WPA2_PSK_AUTH = 0x10,
WMI_WPA_AUTH_CCKM = 0x20,
WMI_WPA2_AUTH_CCKM = 0x40,
} AUTH_MODE;
typedef enum {
NONE_CRYPT = 0x01,
WEP_CRYPT = 0x02,
TKIP_CRYPT = 0x04,
AES_CRYPT = 0x08,
#ifdef WAPI_ENABLE
WAPI_CRYPT = 0x10,
#endif /*WAPI_ENABLE*/
} CRYPTO_TYPE;
#define WMI_MIN_CRYPTO_TYPE NONE_CRYPT
#define WMI_MAX_CRYPTO_TYPE (AES_CRYPT + 1)
#ifdef WAPI_ENABLE
#undef WMI_MAX_CRYPTO_TYPE
#define WMI_MAX_CRYPTO_TYPE (WAPI_CRYPT + 1)
#endif /* WAPI_ENABLE */
#ifdef WAPI_ENABLE
#define IW_ENCODE_ALG_SM4 0x20
/*
* Defined this to be some very high bit because it is less likely to be
* clobbered by future changes to the kernel's wireless.h file
*/
#define IW_AUTH_CIPHER_SMS4 0x40000000
#endif
#define WMI_MIN_KEY_INDEX 0
#define WMI_MAX_KEY_INDEX 3
#ifdef IEEE80211W
#undef WMI_MAX_KEY_INDEX
#define WMI_MAX_KEY_INDEX 5
#endif
#ifdef WAPI_ENABLE
#undef WMI_MAX_KEY_INDEX
#define WMI_MAX_KEY_INDEX 7 /* wapi grpKey 0-3, prwKey 4-7 */
#endif /* WAPI_ENABLE */
#define WMI_MAX_KEY_LEN 32
#define WMI_MAX_SSID_LEN 32
typedef enum {
CONNECT_ASSOC_POLICY_USER = 0x0001,
CONNECT_SEND_REASSOC = 0x0002,
CONNECT_IGNORE_WPAx_GROUP_CIPHER = 0x0004,
CONNECT_PROFILE_MATCH_DONE = 0x0008,
CONNECT_IGNORE_AAC_BEACON = 0x0010,
CONNECT_CSA_FOLLOW_BSS = 0x0020,
CONNECT_DO_WPA_OFFLOAD = 0x0040,
CONNECT_DO_NOT_DEAUTH = 0x0080,
CONNECT_WPS_FLAG = 0x0100,
/* AP configuration flags */
AP_NO_DISASSOC_UPON_DEAUTH = 0x10000,
AP_HOSTPAL_SUPPORT = 0x20000
} WMI_CONNECT_CTRL_FLAGS_BITS;
#define DEFAULT_CONNECT_CTRL_FLAGS (CONNECT_CSA_FOLLOW_BSS)
typedef PREPACK struct {
A_UINT8 networkType;
A_UINT8 dot11AuthMode;
A_UINT8 authMode;
A_UINT8 pairwiseCryptoType;
A_UINT8 pairwiseCryptoLen;
A_UINT8 groupCryptoType;
A_UINT8 groupCryptoLen;
A_UINT8 ssidLength;
A_UCHAR ssid[WMI_MAX_SSID_LEN];
A_UINT16 channel;
A_UINT8 bssid[ATH_MAC_LEN];
A_UINT32 ctrl_flags;
A_UINT8 networkSubtype;
} POSTPACK WMI_CONNECT_CMD;
typedef PREPACK struct {
A_UINT32 divIdleTime;
A_UINT8 antRssiThresh;
A_UINT8 divEnable;
A_UINT16 active_treshold_rate;
} POSTPACK WMI_DIV_PARAMS_CMD;
/*
* WMI_RECONNECT_CMDID
*/
typedef PREPACK struct {
A_UINT16 channel; /* hint */
A_UINT8 bssid[ATH_MAC_LEN]; /* mandatory if set */
} POSTPACK WMI_RECONNECT_CMD;
/*
* WMI_SET_PMK_CMDID
*/
#define WMI_PMK_LEN 32
typedef PREPACK struct {
A_UINT8 pmk[WMI_PMK_LEN];
A_UINT8 pmk_len;
} POSTPACK WMI_SET_PMK_CMD, WMI_GET_PMK_REPLY;
/*
* WMI_SET_PASSPHRASE_CMDID
*/
#define WMI_PASSPHRASE_LEN 64
typedef PREPACK struct {
A_UCHAR ssid[WMI_MAX_SSID_LEN];
A_UINT8 passphrase[WMI_PASSPHRASE_LEN];
A_UINT8 ssid_len;
A_UINT8 passphrase_len;
} POSTPACK WMI_SET_PASSPHRASE_CMD;
/*
* WMI_SET_EXCESS_TX_RETRY_THRES_CMDID
*/
typedef PREPACK struct {
A_UINT32 threshold;
} POSTPACK WMI_SET_EXCESS_TX_RETRY_THRES_CMD;
/*
* WMI_SET_MCASTRATE_CMD
*/
typedef PREPACK struct {
A_UINT16 bitrate; /* in units of 100 Kbps */
/* Valid values are 10, 20, 55, 110, 60, 90, 120, 180,
* 240, 360, 480, 540 */
} POSTPACK WMI_SET_MCASTRATE_CMD;
/*
* WMI_ADD_CIPHER_KEY_CMDID
*/
typedef enum {
PAIRWISE_USAGE = 0x00,
GROUP_USAGE = 0x01,
TX_USAGE = 0x02, /* default Tx Key - Static WEP only */
} KEY_USAGE;
/*
* Bit Flag
* Bit 0 - Initialise TSC - default is Initialize
*/
#define KEY_OP_INIT_TSC 0x01
#define KEY_OP_INIT_RSC 0x02
#ifdef WAPI_ENABLE
#define KEY_OP_INIT_WAPIPN 0x10
#endif /* WAPI_ENABLE */
#define KEY_OP_INIT_VAL 0x03 /* Default Initialise the TSC & RSC */
#define KEY_OP_VALID_MASK 0x03
typedef PREPACK struct {
A_UINT8 keyIndex;
A_UINT8 keyType;
A_UINT8 keyUsage; /* KEY_USAGE */
A_UINT8 keyLength;
A_UINT8 keyRSC[8]; /* key replay sequence counter */
A_UINT8 key[WMI_MAX_KEY_LEN];
A_UINT8 key_op_ctrl; /* Additional Key Control information */
A_UINT8 key_macaddr[ATH_MAC_LEN];
} POSTPACK WMI_ADD_CIPHER_KEY_CMD;
/*
* WMI_DELETE_CIPHER_KEY_CMDID
*/
typedef PREPACK struct {
A_UINT8 keyIndex;
} POSTPACK WMI_DELETE_CIPHER_KEY_CMD;
/*
*for Linux, it need KRK, length is 16
*for Win7, it need CCKM ie, length is 26
*/
#define WMI_KRK_LEN 16
#define WMI_CCKM_IE_LEN 26
/*
* WMI_ADD_KRK_CMDID
*/
typedef PREPACK struct {
A_UINT8 krk[WMI_CCKM_IE_LEN];
} POSTPACK WMI_ADD_KRK_CMD;
/*
* WMI_SET_TKIP_COUNTERMEASURES_CMDID
*/
typedef enum {
WMI_TKIP_CM_DISABLE = 0x0,
WMI_TKIP_CM_ENABLE = 0x1,
} WMI_TKIP_CM_CONTROL;
typedef PREPACK struct {
A_UINT8 cm_en; /* WMI_TKIP_CM_CONTROL */
} POSTPACK WMI_SET_TKIP_COUNTERMEASURES_CMD;
/*
* WMI_SET_PMKID_CMDID
*/
#define WMI_PMKID_LEN 16
typedef enum {
PMKID_DISABLE = 0,
PMKID_ENABLE = 1,
} PMKID_ENABLE_FLG;
typedef PREPACK struct {
A_UINT8 bssid[ATH_MAC_LEN];
A_UINT8 enable; /* PMKID_ENABLE_FLG */
A_UINT8 pmkid[WMI_PMKID_LEN];
} POSTPACK WMI_SET_PMKID_CMD;
/*
* WMI_START_SCAN_CMD
*/
typedef enum {
WMI_LONG_SCAN = 0,
WMI_SHORT_SCAN = 1,
} WMI_SCAN_TYPE;
typedef PREPACK struct {
A_UINT8 nrates;
A_UINT8 rates[WMI_RATE_MAXSIZE];
} POSTPACK WMI_SUPPORTED_RATES;
typedef PREPACK struct {
A_BOOL forceFgScan;
A_BOOL isLegacy; /* For Legacy Cisco AP compatibility */
A_UINT32 homeDwellTime; /* Maximum duration in the home channel(milliseconds) */
A_UINT32 forceScanInterval; /* Time interval between scans (milliseconds)*/
A_BOOL no_cck; /* Flag to force no CCK rates to be used for
probe request frames */
A_UINT8 scanType; /* WMI_SCAN_TYPE */
WMI_SUPPORTED_RATES supp_rates[A_NUM_BANDS]; /* Supported rates to
advertise in probe request
frames */
A_UINT8 numChannels; /* how many channels follow */
A_UINT16 channelList[1]; /* channels in Mhz */
} POSTPACK WMI_BEGIN_SCAN_CMD;
/* WMI_START_SCAN_CMD is to be deprecated; WMI_BEGIN_SCAN_CMD is
* to be used instead. The new command supports P2P mgmt operations using
* station interface
*/
typedef PREPACK struct {
A_BOOL forceFgScan;
A_BOOL isLegacy; /* For Legacy Cisco AP compatibility */
A_UINT32 homeDwellTime; /* Maximum duration in the home channel(milliseconds) */
A_UINT32 forceScanInterval; /* Time interval between scans (milliseconds)*/
A_UINT8 scanType; /* WMI_SCAN_TYPE */
A_UINT8 numChannels; /* how many channels follow */
A_UINT16 channelList[1]; /* channels in Mhz */
} POSTPACK WMI_START_SCAN_CMD;
/*
* WMI_SET_SCAN_PARAMS_CMDID
*/
#define WMI_SHORTSCANRATIO_DEFAULT 3
/*
* Warning: ScanCtrlFlag value of 0xFF is used to disable all flags in WMI_SCAN_PARAMS_CMD
* Do not add any more flags to WMI_SCAN_CTRL_FLAG_BITS
*/
typedef enum {
CONNECT_SCAN_CTRL_FLAGS = 0x01, /* set if can scan in the Connect cmd */
SCAN_CONNECTED_CTRL_FLAGS = 0x02, /* set if scan for the SSID it is */
/* already connected to */
ACTIVE_SCAN_CTRL_FLAGS = 0x04, /* set if enable active scan */
ROAM_SCAN_CTRL_FLAGS = 0x08, /* set if enable roam scan when bmiss and lowrssi */
REPORT_BSSINFO_CTRL_FLAGS = 0x10, /* set if follows customer BSSINFO reporting rule */
ENABLE_AUTO_CTRL_FLAGS = 0x20, /* if disabled, target doesn't
scan after a disconnect event */
ENABLE_SCAN_ABORT_EVENT = 0x40 /* Scan complete event with canceled status will be generated when a scan is prempted before it gets completed */
} WMI_SCAN_CTRL_FLAGS_BITS;
#define CAN_SCAN_IN_CONNECT(flags) (flags & CONNECT_SCAN_CTRL_FLAGS)
#define CAN_SCAN_CONNECTED(flags) (flags & SCAN_CONNECTED_CTRL_FLAGS)
#define ENABLE_ACTIVE_SCAN(flags) (flags & ACTIVE_SCAN_CTRL_FLAGS)
#define ENABLE_ROAM_SCAN(flags) (flags & ROAM_SCAN_CTRL_FLAGS)
#define CONFIG_REPORT_BSSINFO(flags) (flags & REPORT_BSSINFO_CTRL_FLAGS)
#define IS_AUTO_SCAN_ENABLED(flags) (flags & ENABLE_AUTO_CTRL_FLAGS)
#define SCAN_ABORT_EVENT_ENABLED(flags) (flags & ENABLE_SCAN_ABORT_EVENT)
#define DEFAULT_SCAN_CTRL_FLAGS (CONNECT_SCAN_CTRL_FLAGS| SCAN_CONNECTED_CTRL_FLAGS| ACTIVE_SCAN_CTRL_FLAGS| ROAM_SCAN_CTRL_FLAGS | ENABLE_AUTO_CTRL_FLAGS)
typedef PREPACK struct {
A_UINT16 fg_start_period; /* seconds */
A_UINT16 fg_end_period; /* seconds */
A_UINT16 bg_period; /* seconds */
A_UINT16 maxact_chdwell_time; /* msec */
A_UINT16 pas_chdwell_time; /* msec */
A_UINT8 shortScanRatio; /* how many shorts scan for one long */
A_UINT8 scanCtrlFlags;
A_UINT16 minact_chdwell_time; /* msec */
A_UINT16 maxact_scan_per_ssid; /* max active scans per ssid */
A_UINT32 max_dfsch_act_time; /* msecs */
} POSTPACK WMI_SCAN_PARAMS_CMD;
typedef PREPACK struct {
A_UINT16 chan_index;
A_INT8 bang_radar;
} POSTPACK WMI_RADAR_DETECTED_CMD;
/*
* WMI_SET_BSS_FILTER_CMDID
*/
typedef enum {
NONE_BSS_FILTER = 0x0, /* no beacons forwarded */
ALL_BSS_FILTER, /* all beacons forwarded */
PROFILE_FILTER, /* only beacons matching profile */
ALL_BUT_PROFILE_FILTER, /* all but beacons matching profile */
CURRENT_BSS_FILTER, /* only beacons matching current BSS */
ALL_BUT_BSS_FILTER, /* all but beacons matching BSS */
PROBED_SSID_FILTER, /* beacons matching probed ssid */
LAST_BSS_FILTER, /* marker only */
} WMI_BSS_FILTER;
typedef PREPACK struct {
A_UINT8 bssFilter; /* see WMI_BSS_FILTER */
A_UINT8 reserved1; /* For alignment */
A_UINT16 reserved2; /* For alignment */
A_UINT32 ieMask;
} POSTPACK WMI_BSS_FILTER_CMD;
/*
* WMI_SET_PROBED_SSID_CMDID
*/
#define MAX_PROBED_SSID_INDEX 15
typedef enum {
DISABLE_SSID_FLAG = 0, /* disables entry */
SPECIFIC_SSID_FLAG = 0x01, /* probes specified ssid */
ANY_SSID_FLAG = 0x02, /* probes for any ssid */
PASSIVE_LISTEN_SSID_FLAG = 0x04, /* Just Listen on the Channel without Probing for any SSIDs But we wanted to use the Probed SSID List*/ /* for Profile Matching */
} WMI_SSID_FLAG;
typedef PREPACK struct {
A_UINT8 entryIndex; /* 0 to MAX_PROBED_SSID_INDEX */
A_UINT8 flag; /* WMI_SSID_FLG */
A_UINT8 ssidLength;
A_UINT8 ssid[32];
A_UINT8 authentication;
A_UINT8 encryption;
A_UINT8 channelHint;
A_BOOL bmatchcompleteprofile; /* If this Flag is True, we do a complete profile match of SSID, AUTH, Encryption */
} POSTPACK WMI_PROBED_SSID_CMD;
/*
* WMI_SET_LISTEN_INT_CMDID
* The Listen interval is between 15 and 3000 TUs
*/
#define MIN_LISTEN_INTERVAL 15
#define MAX_LISTEN_INTERVAL 5000
#define MIN_LISTEN_BEACONS 1
#define MAX_LISTEN_BEACONS 50
typedef PREPACK struct {
A_UINT16 listenInterval;
A_UINT16 numBeacons;
} POSTPACK WMI_LISTEN_INT_CMD;
/*
* WMI_SET_BEACON_INT_CMDID
*/
typedef PREPACK struct {
A_UINT16 beaconInterval;
} POSTPACK WMI_BEACON_INT_CMD;
/*
* WMI_SET_BMISS_TIME_CMDID
* valid values are between 1000 and 5000 TUs
*/
#define MIN_BMISS_TIME 1000
#define MAX_BMISS_TIME 5000
#define MIN_BMISS_BEACONS 1
#define MAX_BMISS_BEACONS 50
typedef PREPACK struct {
A_UINT16 bmissTime;
A_UINT16 numBeacons;
} POSTPACK WMI_BMISS_TIME_CMD;
/*
* WMI_SET_POWER_MODE_CMDID
*/
typedef enum {
REC_POWER = 0x01,
MAX_PERF_POWER,
} WMI_POWER_MODE;
typedef PREPACK struct {
A_UINT8 powerMode; /* WMI_POWER_MODE */
} POSTPACK WMI_POWER_MODE_CMD;
typedef PREPACK struct {
A_INT8 status; /* WMI_SET_PARAMS_REPLY */
} POSTPACK WMI_SET_PARAMS_REPLY;
typedef PREPACK struct {
A_UINT32 opcode;
A_UINT32 length;
A_CHAR buffer[1]; /* WMI_SET_PARAMS */
} POSTPACK WMI_SET_PARAMS_CMD;
typedef PREPACK struct {
A_UINT8 multicast_mac[ATH_MAC_LEN]; /* WMI_SET_MCAST_FILTER */
} POSTPACK WMI_SET_MCAST_FILTER_CMD;
typedef PREPACK struct {
A_UINT8 enable; /* WMI_MCAST_FILTER */
} POSTPACK WMI_MCAST_FILTER_CMD;
/*
* WMI_SET_POWER_PARAMS_CMDID
*/
typedef enum {
IGNORE_DTIM = 0x01,
NORMAL_DTIM = 0x02,
STICK_DTIM = 0x03,
AUTO_DTIM = 0x04,
} WMI_DTIM_POLICY;
/* Policy to determnine whether TX should wakeup WLAN if sleeping */
typedef enum {
TX_WAKEUP_UPON_SLEEP = 1,
TX_DONT_WAKEUP_UPON_SLEEP = 2
} WMI_TX_WAKEUP_POLICY_UPON_SLEEP;
/*
* Policy to determnine whether power save failure event should be sent to
* host during scanning
*/
typedef enum {
SEND_POWER_SAVE_FAIL_EVENT_ALWAYS = 1,
IGNORE_POWER_SAVE_FAIL_EVENT_DURING_SCAN = 2,
} POWER_SAVE_FAIL_EVENT_POLICY;
typedef PREPACK struct {
A_UINT16 idle_period; /* msec */
A_UINT16 pspoll_number;
A_UINT16 dtim_policy;
A_UINT16 tx_wakeup_policy;
A_UINT16 num_tx_to_wakeup;
A_UINT16 ps_fail_event_policy;
} POSTPACK WMI_POWER_PARAMS_CMD;
/* Adhoc power save types */
typedef enum {
ADHOC_PS_DISABLE=1,
ADHOC_PS_ATH=2,
ADHOC_PS_IEEE=3,
ADHOC_PS_OTHER=4,
} WMI_ADHOC_PS_TYPE;
typedef PREPACK struct {
A_UINT8 power_saving;
A_UINT8 ttl; /* number of beacon periods */
A_UINT16 atim_windows; /* msec */
A_UINT16 timeout_value; /* msec */
} POSTPACK WMI_IBSS_PM_CAPS_CMD;
/* AP power save types */
typedef enum {
AP_PS_DISABLE=1,
AP_PS_ATH=2,
} WMI_AP_PS_TYPE;
typedef PREPACK struct {
A_UINT32 idle_time; /* in msec */
A_UINT32 ps_period; /* in usec */
A_UINT8 sleep_period; /* in ps periods */
A_UINT8 psType;
} POSTPACK WMI_AP_PS_CMD;
/*
* WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID
*/
typedef enum {
IGNORE_TIM_ALL_QUEUES_APSD = 0,
PROCESS_TIM_ALL_QUEUES_APSD = 1,
IGNORE_TIM_SIMULATED_APSD = 2,
PROCESS_TIM_SIMULATED_APSD = 3,
} APSD_TIM_POLICY;
typedef PREPACK struct {
A_UINT16 psPollTimeout; /* msec */
A_UINT16 triggerTimeout; /* msec */
A_UINT32 apsdTimPolicy; /* TIM behavior with ques APSD enabled. Default is IGNORE_TIM_ALL_QUEUES_APSD */
A_UINT32 simulatedAPSDTimPolicy; /* TIM behavior with simulated APSD enabled. Default is PROCESS_TIM_SIMULATED_APSD */
} POSTPACK WMI_POWERSAVE_TIMERS_POLICY_CMD;
/*
* WMI_SET_VOICE_PKT_SIZE_CMDID
*/
typedef PREPACK struct {
A_UINT16 voicePktSize;
} POSTPACK WMI_SET_VOICE_PKT_SIZE_CMD;
/*
* WMI_SET_MAX_SP_LEN_CMDID
*/
typedef enum {
DELIVER_ALL_PKT = 0x0,
DELIVER_2_PKT = 0x1,
DELIVER_4_PKT = 0x2,
DELIVER_6_PKT = 0x3,
} APSD_SP_LEN_TYPE;
typedef PREPACK struct {
A_UINT8 maxSPLen;
} POSTPACK WMI_SET_MAX_SP_LEN_CMD;
/*
* WMI_SET_DISC_TIMEOUT_CMDID
*/
typedef PREPACK struct {
A_UINT8 disconnectTimeout; /* seconds */
} POSTPACK WMI_DISC_TIMEOUT_CMD;
typedef enum {
UPLINK_TRAFFIC = 0,
DNLINK_TRAFFIC = 1,
BIDIR_TRAFFIC = 2,
} DIR_TYPE;
typedef enum {
DISABLE_FOR_THIS_AC = 0,
ENABLE_FOR_THIS_AC = 1,
ENABLE_FOR_ALL_AC = 2,
} VOICEPS_CAP_TYPE;
typedef enum {
TRAFFIC_TYPE_APERIODIC = 0,
TRAFFIC_TYPE_PERIODIC = 1,
}TRAFFIC_TYPE;
/*
* WMI_SYNCHRONIZE_CMDID
*/
typedef PREPACK struct {
A_UINT8 dataSyncMap;
} POSTPACK WMI_SYNC_CMD;
/*
* WMI_CREATE_PSTREAM_CMDID
*/
typedef PREPACK struct {
A_UINT32 minServiceInt; /* in milli-sec */
A_UINT32 maxServiceInt; /* in milli-sec */
A_UINT32 inactivityInt; /* in milli-sec */
A_UINT32 suspensionInt; /* in milli-sec */
A_UINT32 serviceStartTime;
A_UINT32 minDataRate; /* in bps */
A_UINT32 meanDataRate; /* in bps */
A_UINT32 peakDataRate; /* in bps */
A_UINT32 maxBurstSize;
A_UINT32 delayBound;
A_UINT32 minPhyRate; /* in bps */
A_UINT32 sba;
A_UINT32 mediumTime;
A_UINT16 nominalMSDU; /* in octects */
A_UINT16 maxMSDU; /* in octects */
A_UINT8 trafficClass;
A_UINT8 trafficDirection; /* DIR_TYPE */
A_UINT8 rxQueueNum;
A_UINT8 trafficType; /* TRAFFIC_TYPE */
A_UINT8 voicePSCapability; /* VOICEPS_CAP_TYPE */
A_UINT8 tsid;
A_UINT8 userPriority; /* 802.1D user priority */
A_UINT8 nominalPHY; /* nominal phy rate */
} POSTPACK WMI_CREATE_PSTREAM_CMD;
/*
* WMI_DELETE_PSTREAM_CMDID
*/
typedef PREPACK struct {
A_UINT8 txQueueNumber;
A_UINT8 rxQueueNumber;
A_UINT8 trafficDirection;
A_UINT8 trafficClass;
A_UINT8 tsid;
} POSTPACK WMI_DELETE_PSTREAM_CMD;
/*
* WMI_SET_CHANNEL_PARAMS_CMDID
*/
typedef enum {
WMI_11A_MODE = 0x1,
WMI_11G_MODE = 0x2,
WMI_11AG_MODE = 0x3,
WMI_11B_MODE = 0x4,
WMI_11GONLY_MODE = 0x5,
} WMI_PHY_MODE;
#define WMI_MAX_CHANNELS 32
typedef PREPACK struct {
A_UINT8 reserved1;
A_UINT8 scanParam; /* set if enable scan */
A_UINT8 phyMode; /* see WMI_PHY_MODE */
A_UINT8 numChannels; /* how many channels follow */
A_UINT16 channelList[1]; /* channels in Mhz */
} POSTPACK WMI_CHANNEL_PARAMS_CMD;
/*
* WMI_RSSI_THRESHOLD_PARAMS_CMDID
* Setting the polltime to 0 would disable polling.
* Threshold values are in the ascending order, and should agree to:
* (lowThreshold_lowerVal < lowThreshold_upperVal < highThreshold_lowerVal
* < highThreshold_upperVal)
*/
typedef PREPACK struct WMI_RSSI_THRESHOLD_PARAMS{
A_UINT32 pollTime; /* Polling time as a factor of LI */
A_INT16 thresholdAbove1_Val; /* lowest of upper */
A_INT16 thresholdAbove2_Val;
A_INT16 thresholdAbove3_Val;
A_INT16 thresholdAbove4_Val;
A_INT16 thresholdAbove5_Val;
A_INT16 thresholdAbove6_Val; /* highest of upper */
A_INT16 thresholdBelow1_Val; /* lowest of bellow */
A_INT16 thresholdBelow2_Val;
A_INT16 thresholdBelow3_Val;
A_INT16 thresholdBelow4_Val;
A_INT16 thresholdBelow5_Val;
A_INT16 thresholdBelow6_Val; /* highest of bellow */
A_UINT8 weight; /* "alpha" */
A_UINT8 reserved[3];
} POSTPACK WMI_RSSI_THRESHOLD_PARAMS_CMD;
/*
* WMI_SNR_THRESHOLD_PARAMS_CMDID
* Setting the polltime to 0 would disable polling.
*/
typedef PREPACK struct WMI_SNR_THRESHOLD_PARAMS{
A_UINT32 pollTime; /* Polling time as a factor of LI */
A_UINT8 weight; /* "alpha" */
A_UINT8 thresholdAbove1_Val; /* lowest of uppper*/
A_UINT8 thresholdAbove2_Val;
A_UINT8 thresholdAbove3_Val;
A_UINT8 thresholdAbove4_Val; /* highest of upper */
A_UINT8 thresholdBelow1_Val; /* lowest of bellow */
A_UINT8 thresholdBelow2_Val;
A_UINT8 thresholdBelow3_Val;
A_UINT8 thresholdBelow4_Val; /* highest of bellow */
A_UINT8 reserved[3];
} POSTPACK WMI_SNR_THRESHOLD_PARAMS_CMD;
/*
* WMI_LQ_THRESHOLD_PARAMS_CMDID
*/
typedef PREPACK struct WMI_LQ_THRESHOLD_PARAMS {
A_UINT8 enable;
A_UINT8 thresholdAbove1_Val;
A_UINT8 thresholdAbove2_Val;
A_UINT8 thresholdAbove3_Val;
A_UINT8 thresholdAbove4_Val;
A_UINT8 thresholdBelow1_Val;
A_UINT8 thresholdBelow2_Val;
A_UINT8 thresholdBelow3_Val;
A_UINT8 thresholdBelow4_Val;
A_UINT8 reserved[3];
} POSTPACK WMI_LQ_THRESHOLD_PARAMS_CMD;
typedef enum {
WMI_LPREAMBLE_DISABLED = 0,
WMI_LPREAMBLE_ENABLED
} WMI_LPREAMBLE_STATUS;
typedef enum {
WMI_IGNORE_BARKER_IN_ERP = 0,
WMI_DONOT_IGNORE_BARKER_IN_ERP
} WMI_PREAMBLE_POLICY;
typedef PREPACK struct {
A_UINT8 status;
A_UINT8 preamblePolicy;
}POSTPACK WMI_SET_LPREAMBLE_CMD;
typedef PREPACK struct {
A_UINT16 threshold;
}POSTPACK WMI_SET_RTS_CMD;
/*
* WMI_TARGET_ERROR_REPORT_BITMASK_CMDID
* Sets the error reporting event bitmask in target. Target clears it
* upon an error. Subsequent errors are counted, but not reported
* via event, unless the bitmask is set again.
*/
typedef PREPACK struct {
A_UINT32 bitmask;
} POSTPACK WMI_TARGET_ERROR_REPORT_BITMASK;
/*
* WMI_SET_TX_PWR_CMDID
*/
typedef PREPACK struct {
A_UINT8 dbM; /* in dbM units */
} POSTPACK WMI_SET_TX_PWR_CMD, WMI_TX_PWR_REPLY;
/*
* WMI_SET_ASSOC_INFO_CMDID
*
* A maximum of 2 private IEs can be sent in the [Re]Assoc request.
* A 3rd one, the CCX version IE can also be set from the host.
*/
/*
* Bit 7: 1 CCX cckm ie upload to host, 0 default, don't upload
* Bit 6: 1 ccx radio measurement upload to host, 0 default, don't upload
* Bit 3~5: reserved
* Bit 0~2: ccx version
*/
#define WMI_CCX_VERSION_MASK 0x7
#define WMI_CCX_CCKMIE_UPLOAD_MASK (0x1 << 7)
#define WMI_CCX_RM_UPLOAD_MASK (0x1 << 6)
#define WMI_MAX_ASSOC_INFO_TYPE 2
#define WMI_CCX_VER_IE 2 /* ieType to set CCX Version IE */
#define WMI_MAX_ASSOC_INFO_LEN 240
typedef PREPACK struct {
A_UINT8 ieType;
A_UINT8 bufferSize;
A_UINT8 assocInfo[1]; /* up to WMI_MAX_ASSOC_INFO_LEN */
} POSTPACK WMI_SET_ASSOC_INFO_CMD;
/*
* WMI_GET_TX_PWR_CMDID does not take any parameters
*/
/*
* WMI_ADD_BAD_AP_CMDID
*/
#define WMI_MAX_BAD_AP_INDEX 1
typedef PREPACK struct {
A_UINT8 badApIndex; /* 0 to WMI_MAX_BAD_AP_INDEX */
A_UINT8 bssid[ATH_MAC_LEN];
} POSTPACK WMI_ADD_BAD_AP_CMD;
/*
* WMI_DELETE_BAD_AP_CMDID
*/
typedef PREPACK struct {
A_UINT8 badApIndex; /* 0 to WMI_MAX_BAD_AP_INDEX */
} POSTPACK WMI_DELETE_BAD_AP_CMD;
/*
* WMI_SET_ACCESS_PARAMS_CMDID
*/
#define WMI_DEFAULT_TXOP_ACPARAM 0 /* implies one MSDU */
#define WMI_DEFAULT_ECWMIN_ACPARAM 4 /* corresponds to CWmin of 15 */
#define WMI_DEFAULT_ECWMAX_ACPARAM 10 /* corresponds to CWmax of 1023 */
#define WMI_MAX_CW_ACPARAM 15 /* maximum eCWmin or eCWmax */
#define WMI_DEFAULT_AIFSN_ACPARAM 2
#define WMI_MAX_AIFSN_ACPARAM 15
typedef PREPACK struct {
A_UINT16 txop; /* in units of 32 usec */
A_UINT8 eCWmin;
A_UINT8 eCWmax;
A_UINT8 aifsn;
A_UINT8 ac;
} POSTPACK WMI_SET_ACCESS_PARAMS_CMD;
/*
* WMI_SET_RETRY_LIMITS_CMDID
*
* This command is used to customize the number of retries the
* wlan device will perform on a given frame.
*/
#define WMI_MIN_RETRIES 2
#define WMI_MAX_RETRIES 13
typedef enum {
MGMT_FRAMETYPE = 0,
CONTROL_FRAMETYPE = 1,
DATA_FRAMETYPE = 2
} WMI_FRAMETYPE;
typedef PREPACK struct {
A_UINT8 frameType; /* WMI_FRAMETYPE */
A_UINT8 trafficClass; /* applies only to DATA_FRAMETYPE */
A_UINT8 maxRetries;
A_UINT8 enableNotify;
} POSTPACK WMI_SET_RETRY_LIMITS_CMD;
/*
* WMI_SET_ROAM_CTRL_CMDID
*
* This command is used to influence the Roaming behaviour
* Set the host biases of the BSSs before setting the roam mode as bias
* based.
*/
/*
* Different types of Roam Control
*/
typedef enum {
WMI_FORCE_ROAM = 1, /* Roam to the specified BSSID */
WMI_SET_ROAM_MODE = 2, /* default ,progd bias, no roam */
WMI_SET_HOST_BIAS = 3, /* Set the Host Bias */
WMI_SET_LOWRSSI_SCAN_PARAMS = 4, /* Set lowrssi Scan parameters */
} WMI_ROAM_CTRL_TYPE;
#define WMI_MIN_ROAM_CTRL_TYPE WMI_FORCE_ROAM
#define WMI_MAX_ROAM_CTRL_TYPE WMI_SET_LOWRSSI_SCAN_PARAMS
/*
* ROAM MODES
*/
typedef enum {
WMI_DEFAULT_ROAM_MODE = 1, /* RSSI based ROAM */
WMI_HOST_BIAS_ROAM_MODE = 2, /* HOST BIAS based ROAM */
WMI_LOCK_BSS_MODE = 3 /* Lock to the Current BSS - no Roam */
} WMI_ROAM_MODE;
/*
* BSS HOST BIAS INFO
*/
typedef PREPACK struct {
A_UINT8 bssid[ATH_MAC_LEN];
A_INT8 bias;
} POSTPACK WMI_BSS_BIAS;
typedef PREPACK struct {
A_UINT8 numBss;
WMI_BSS_BIAS bssBias[1];
} POSTPACK WMI_BSS_BIAS_INFO;
typedef PREPACK struct WMI_LOWRSSI_SCAN_PARAMS {
A_UINT16 lowrssi_scan_period;
A_INT16 lowrssi_scan_threshold;
A_INT16 lowrssi_roam_threshold;
A_UINT8 roam_rssi_floor;
A_UINT8 reserved[1]; /* For alignment */
} POSTPACK WMI_LOWRSSI_SCAN_PARAMS;
typedef PREPACK struct {
PREPACK union {
A_UINT8 bssid[ATH_MAC_LEN]; /* WMI_FORCE_ROAM */
A_UINT8 roamMode; /* WMI_SET_ROAM_MODE */
WMI_BSS_BIAS_INFO bssBiasInfo; /* WMI_SET_HOST_BIAS */
WMI_LOWRSSI_SCAN_PARAMS lrScanParams;
} POSTPACK info;
A_UINT8 roamCtrlType ;
} POSTPACK WMI_SET_ROAM_CTRL_CMD;
/*
* WMI_SET_BT_WLAN_CONN_PRECEDENCE_CMDID
*/
typedef enum {
BT_WLAN_CONN_PRECDENCE_WLAN=0, /* Default */
BT_WLAN_CONN_PRECDENCE_PAL,
} BT_WLAN_CONN_PRECEDENCE;
typedef PREPACK struct {
A_UINT8 precedence;
} POSTPACK WMI_SET_BT_WLAN_CONN_PRECEDENCE;
/*
* WMI_ENABLE_RM_CMDID
*/
typedef PREPACK struct {
A_BOOL enable_radio_measurements;
} POSTPACK WMI_ENABLE_RM_CMD;
/*
* WMI_SET_MAX_OFFHOME_DURATION_CMDID
*/
typedef PREPACK struct {
A_UINT8 max_offhome_duration;
} POSTPACK WMI_SET_MAX_OFFHOME_DURATION_CMD;
typedef PREPACK struct {
A_UINT32 frequency;
A_UINT8 threshold;
} POSTPACK WMI_SET_HB_CHALLENGE_RESP_PARAMS_CMD;
typedef enum {
WMI_PKTLOG_CMD_DISABLE,
WMI_PKTLOG_CMD_SETSIZE,
} WMI_PKTLOG_CMD;
#define PKTLOG_MAX_BYTES 4096
typedef PREPACK struct {
A_UINT32 nbytes;
A_UINT8 buffer[PKTLOG_MAX_BYTES];
} POSTPACK WMI_GET_PKTLOG_CMD;
/* LPL commands */
typedef PREPACK struct {
A_UINT8 lplPolicy; /*0 - force off, 1 force on, 2 dynamic*/
A_UINT8 noBlockerDetect; /*don't do blocker detection if lpl policy is set
to dynamic*/
A_UINT8 noRfbDetect; /*don't do rate fall back detection if lpl policy is set
to dynamic*/
A_UINT8 rsvd;
} POSTPACK WMI_LPL_FORCE_ENABLE_CMD;
/*command structure for all policy related commands*/
typedef PREPACK struct {
A_UINT64 index;
A_BOOL value;
} POSTPACK WMI_LPL_POLICY_CMD;
typedef PREPACK struct {
A_UINT32 rfbPeriod;
A_UINT32 rfbObsDuration;
A_UINT32 blockerBeaconRssi;
A_UINT8 chanOff;
A_UINT32 rfbDiffThold;
A_UINT32 bRssiThold;
A_UINT32 maxBlockerRssi;
} POSTPACK WMI_LPL_PARAMS_CMD;
typedef enum {
WMI_PKTLOG_OPTION_LOG_TCP_HEADERS = 0x1,
WMI_PKTLOG_OPTION_TRIGGER_THRUPUT = 0x2,
WMI_PKTLOG_OPTION_TRIGGER_SACK = 0x4,
WMI_PKTLOG_OPTION_TRIGGER_PER = 0x8
} WMI_PKTLOG_OPTION;
typedef enum {
WMI_PKTLOG_EVENT_RX = 0x1,
WMI_PKTLOG_EVENT_TX = 0x2,
WMI_PKTLOG_EVENT_RCF = 0x4, /* Rate Control Find */
WMI_PKTLOG_EVENT_RCU = 0x8, /* Rate Control Update */
} WMI_PKTLOG_EVENT;
typedef PREPACK struct {
WMI_PKTLOG_EVENT evlist;
WMI_PKTLOG_OPTION option;
A_UINT32 trigger_thresh;
A_UINT32 trigger_interval;
A_UINT32 trigger_tail_count;
A_UINT32 buffer_size;
} POSTPACK WMI_ENABLE_PKTLOG_CMD;
typedef enum {
WMI_SMPS_OPTION_MODE = 0x1,
WMI_SMPS_OPTION_AUTO = 0x2,
WMI_SMPS_OPTION_DATATHRESH = 0x4,
WMI_SMPS_OPTION_RSSITHRESH = 0x8,
} WMI_SMPS_OPTION;
typedef enum {
WMI_SMPS_MODE_STATIC = 0x1,
WMI_SMPS_MODE_DYNAMIC = 0x2,
} WMI_SMPS_MODE;
typedef PREPACK struct {
A_UINT8 flags; /* To indicate which options have changed */
A_UINT8 rssiThresh;
A_UINT8 dataThresh;
A_UINT8 mode; /* static/dynamic */
A_UINT8 automatic;
} POSTPACK WMI_CONFIG_SMPS_CMD;
typedef PREPACK struct {
A_UINT8 enable; /* Enable/disable */
} POSTPACK WMI_ENABLE_SMPS_CMD;
typedef enum {
WMI_CCX_RM_STATUS_UNKNOWN = 0,
WMI_CCX_RM_REPORT_SENT,
WMI_CCX_RM_REFUSE_REPORT_SENT,
WMI_CCX_RM_STATUS_MAX
} WMI_CCX_RM_STATUS_TYPE;
/*---------------------- BTCOEX RELATED -------------------------------------*/
/*----------------------COMMON to AR6002 and AR6003 -------------------------*/
typedef enum {
BT_STREAM_UNDEF = 0,
BT_STREAM_SCO, /* SCO stream */
BT_STREAM_A2DP, /* A2DP stream */
BT_STREAM_SCAN, /* BT Discovery or Page */
BT_STREAM_ESCO,
BT_STREAM_MAX
} BT_STREAM_TYPE;
typedef enum {
BT_PARAM_SCO_PSPOLL_LATENCY_ONE_FOURTH =1,
BT_PARAM_SCO_PSPOLL_LATENCY_HALF,
BT_PARAM_SCO_PSPOLL_LATENCY_THREE_FOURTH,
} BT_PARAMS_SCO_PSPOLL_LATENCY;
typedef enum {
BT_PARAMS_SCO_STOMP_SCO_NEVER =1,
BT_PARAMS_SCO_STOMP_SCO_ALWAYS,
BT_PARAMS_SCO_STOMP_SCO_IN_LOWRSSI,
} BT_PARAMS_SCO_STOMP_RULES;
typedef enum {
BT_STATUS_UNDEF = 0,
BT_STATUS_ON,
BT_STATUS_OFF,
BT_STATUS_MAX
} BT_STREAM_STATUS;
typedef PREPACK struct {
A_UINT8 streamType;
A_UINT8 status;
} POSTPACK WMI_SET_BT_STATUS_CMD;
typedef enum {
BT_ANT_TYPE_UNDEF=0,
BT_ANT_TYPE_DUAL,
BT_ANT_TYPE_SPLITTER,
BT_ANT_TYPE_SWITCH,
BT_ANT_TYPE_HIGH_ISO_DUAL
} BT_ANT_FRONTEND_CONFIG;
typedef enum {
BT_COLOCATED_DEV_BTS4020=0,
BT_COLCATED_DEV_CSR ,
BT_COLOCATED_DEV_VALKYRIE
} BT_COLOCATED_DEV_TYPE;
/*********************** Applicable to AR6002 ONLY ******************************/
typedef enum {
BT_PARAM_SCO = 1, /* SCO stream parameters */
BT_PARAM_A2DP ,
BT_PARAM_ANTENNA_CONFIG,
BT_PARAM_COLOCATED_BT_DEVICE,
BT_PARAM_ACLCOEX,
BT_PARAM_11A_SEPARATE_ANT,
BT_PARAM_MAX
} BT_PARAM_TYPE;
#define BT_SCO_ALLOW_CLOSE_RANGE_OPT (1 << 0)
#define BT_SCO_FORCE_AWAKE_OPT (1 << 1)
#define BT_SCO_SET_RSSI_OVERRIDE(flags) ((flags) |= (1 << 2))
#define BT_SCO_GET_RSSI_OVERRIDE(flags) (((flags) >> 2) & 0x1)
#define BT_SCO_SET_RTS_OVERRIDE(flags) ((flags) |= (1 << 3))
#define BT_SCO_GET_RTS_OVERRIDE(flags) (((flags) >> 3) & 0x1)
#define BT_SCO_GET_MIN_LOW_RATE_CNT(flags) (((flags) >> 8) & 0xFF)
#define BT_SCO_GET_MAX_LOW_RATE_CNT(flags) (((flags) >> 16) & 0xFF)
#define BT_SCO_SET_MIN_LOW_RATE_CNT(flags,val) (flags) |= (((val) & 0xFF) << 8)
#define BT_SCO_SET_MAX_LOW_RATE_CNT(flags,val) (flags) |= (((val) & 0xFF) << 16)
typedef PREPACK struct {
A_UINT32 numScoCyclesForceTrigger; /* Number SCO cycles after which
force a pspoll. default = 10 */
A_UINT32 dataResponseTimeout; /* Timeout Waiting for Downlink pkt
in response for ps-poll,
default = 10 msecs */
A_UINT32 stompScoRules;
A_UINT32 scoOptFlags; /* SCO Options Flags :
bits: meaning:
0 Allow Close Range Optimization
1 Force awake during close range
2 If set use host supplied RSSI for OPT
3 If set use host supplied RTS COUNT for OPT
4..7 Unused
8..15 Low Data Rate Min Cnt
16..23 Low Data Rate Max Cnt
*/
A_UINT8 stompDutyCyleVal; /* Sco cycles to limit ps-poll queuing
if stomped */
A_UINT8 stompDutyCyleMaxVal; /*firm ware increases stomp duty cycle
gradually uptill this value on need basis*/
A_UINT8 psPollLatencyFraction; /* Fraction of idle
period, within which
additional ps-polls
can be queued */
A_UINT8 noSCOSlots; /* Number of SCO Tx/Rx slots.
HVx, EV3, 2EV3 = 2 */
A_UINT8 noIdleSlots; /* Number of Bluetooth idle slots between
consecutive SCO Tx/Rx slots
HVx, EV3 = 4
2EV3 = 10 */
A_UINT8 scoOptOffRssi;/*RSSI value below which we go to ps poll*/
A_UINT8 scoOptOnRssi; /*RSSI value above which we reenter opt mode*/
A_UINT8 scoOptRtsCount;
} POSTPACK BT_PARAMS_SCO;
#define BT_A2DP_ALLOW_CLOSE_RANGE_OPT (1 << 0)
#define BT_A2DP_FORCE_AWAKE_OPT (1 << 1)
#define BT_A2DP_SET_RSSI_OVERRIDE(flags) ((flags) |= (1 << 2))
#define BT_A2DP_GET_RSSI_OVERRIDE(flags) (((flags) >> 2) & 0x1)
#define BT_A2DP_SET_RTS_OVERRIDE(flags) ((flags) |= (1 << 3))
#define BT_A2DP_GET_RTS_OVERRIDE(flags) (((flags) >> 3) & 0x1)
#define BT_A2DP_GET_MIN_LOW_RATE_CNT(flags) (((flags) >> 8) & 0xFF)
#define BT_A2DP_GET_MAX_LOW_RATE_CNT(flags) (((flags) >> 16) & 0xFF)
#define BT_A2DP_SET_MIN_LOW_RATE_CNT(flags,val) (flags) |= (((val) & 0xFF) << 8)
#define BT_A2DP_SET_MAX_LOW_RATE_CNT(flags,val) (flags) |= (((val) & 0xFF) << 16)
typedef PREPACK struct {
A_UINT32 a2dpWlanUsageLimit; /* MAX time firmware uses the medium for
wlan, after it identifies the idle time
default (30 msecs) */
A_UINT32 a2dpBurstCntMin; /* Minimum number of bluetooth data frames
to replenish Wlan Usage limit (default 3) */
A_UINT32 a2dpDataRespTimeout;
A_UINT32 a2dpOptFlags; /* A2DP Option flags:
bits: meaning:
0 Allow Close Range Optimization
1 Force awake during close range
2 If set use host supplied RSSI for OPT
3 If set use host supplied RTS COUNT for OPT
4..7 Unused
8..15 Low Data Rate Min Cnt
16..23 Low Data Rate Max Cnt
*/
A_UINT8 isCoLocatedBtRoleMaster;
A_UINT8 a2dpOptOffRssi;/*RSSI value below which we go to ps poll*/
A_UINT8 a2dpOptOnRssi; /*RSSI value above which we reenter opt mode*/
A_UINT8 a2dpOptRtsCount;
}POSTPACK BT_PARAMS_A2DP;
/* During BT ftp/ BT OPP or any another data based acl profile on bluetooth
(non a2dp).*/
typedef PREPACK struct {
A_UINT32 aclWlanMediumUsageTime; /* Wlan usage time during Acl (non-a2dp)
coexistence (default 30 msecs) */
A_UINT32 aclBtMediumUsageTime; /* Bt usage time during acl coexistence
(default 30 msecs)*/
A_UINT32 aclDataRespTimeout;
A_UINT32 aclDetectTimeout; /* ACL coexistence enabled if we get
10 Pkts in X msec(default 100 msecs) */
A_UINT32 aclmaxPktCnt; /* No of ACL pkts to receive before
enabling ACL coex */
}POSTPACK BT_PARAMS_ACLCOEX;
typedef PREPACK struct {
PREPACK union {
BT_PARAMS_SCO scoParams;
BT_PARAMS_A2DP a2dpParams;
BT_PARAMS_ACLCOEX aclCoexParams;
A_UINT8 antType; /* 0 -Disabled (default)
1 - BT_ANT_TYPE_DUAL
2 - BT_ANT_TYPE_SPLITTER
3 - BT_ANT_TYPE_SWITCH */
A_UINT8 coLocatedBtDev; /* 0 - BT_COLOCATED_DEV_BTS4020 (default)
1 - BT_COLCATED_DEV_CSR
2 - BT_COLOCATED_DEV_VALKYRIe
*/
} POSTPACK info;
A_UINT8 paramType ;
} POSTPACK WMI_SET_BT_PARAMS_CMD;
/************************ END AR6002 BTCOEX *******************************/
/*-----------------------AR6003 BTCOEX -----------------------------------*/
/* ---------------WMI_SET_BTCOEX_FE_ANT_CMDID --------------------------*/
/* Indicates front end antenna configuration. This command needs to be issued
* right after initialization and after WMI_SET_BTCOEX_COLOCATED_BT_DEV_CMDID.
* AR6003 enables coexistence and antenna switching based on the configuration.
*/
typedef enum {
WMI_BTCOEX_NOT_ENABLED = 0,
WMI_BTCOEX_FE_ANT_SINGLE =1,
WMI_BTCOEX_FE_ANT_DUAL=2,
WMI_BTCOEX_FE_ANT_DUAL_HIGH_ISO=3,
WMI_BTCOEX_FE_ANT_DUAL_SH_BT_LOW_ISO = 4,
WMI_BTCOEX_FE_ANT_DUAL_SH_BT_HIGH_ISO = 5,
WMI_BTCOEX_FE_ANT_TYPE_MAX
}WMI_BTCOEX_FE_ANT_TYPE;
typedef PREPACK struct {
A_UINT8 btcoexFeAntType; /* 1 - WMI_BTCOEX_FE_ANT_SINGLE for single antenna front end
2 - WMI_BTCOEX_FE_ANT_DUAL for dual antenna front end
(for isolations less 35dB, for higher isolation there
is not need to pass this command).
(not implemented)
*/
}POSTPACK WMI_SET_BTCOEX_FE_ANT_CMD;
/* -------------WMI_SET_BTCOEX_COLOCATED_BT_DEV_CMDID ----------------*/
/* Indicate the bluetooth chip to the firmware. Firmware can have different algorithm based
* bluetooth chip type.Based on bluetooth device, different coexistence protocol would be used.
*/
typedef PREPACK struct {
A_UINT8 btcoexCoLocatedBTdev; /*1 - Qcom BT (3 -wire PTA)
2 - CSR BT (3 wire PTA)
3 - Atheros 3001 BT (3 wire PTA)
4 - STE bluetooth (4-wire ePTA)
5 - Atheros 3002 BT (4-wire MCI)
defaults= 3 (Atheros 3001 BT )
*/
}POSTPACK WMI_SET_BTCOEX_COLOCATED_BT_DEV_CMD;
/* -------------WMI_SET_BTCOEX_BTINQUIRY_PAGE_CONFIG_CMDID ------------*/
/* Configuration parameters during bluetooth inquiry and page. Page configuration
* is applicable only on interfaces which can distinguish page (applicable only for ePTA -
* STE bluetooth).
* Bluetooth inquiry start and end is indicated via WMI_SET_BTCOEX_BT_OPERATING_STATUS_CMDID.
* During this the station will be power-save mode.
*/
typedef PREPACK struct {
A_UINT32 btInquiryDataFetchFrequency;/* The frequency of querying the AP for data
(via pspoll) is configured by this parameter.
"default = 10 ms" */
A_UINT32 protectBmissDurPostBtInquiry;/* The firmware will continue to be in inquiry state
for configured duration, after inquiry completion
. This is to ensure other bluetooth transactions
(RDP, SDP profiles, link key exchange ...etc)
goes through smoothly without wifi stomping.
default = 10 secs*/
A_UINT32 maxpageStomp; /*Applicable only for STE-BT interface. Currently not
used */
A_UINT32 btInquiryPageFlag; /* Not used */
}POSTPACK WMI_SET_BTCOEX_BTINQUIRY_PAGE_CONFIG_CMD;
/*---------------------WMI_SET_BTCOEX_SCO_CONFIG_CMDID ---------------*/
/* Configure SCO parameters. These parameters would be used whenever firmware is indicated
* of (e)SCO profile on bluetooth ( via WMI_SET_BTCOEX_BT_OPERATING_STATUS_CMDID).
* Configration of BTCOEX_SCO_CONFIG data structure are common configuration and applies
* ps-poll mode and opt mode.
* Ps-poll Mode - Station is in power-save and retrieves downlink data between sco gaps.
* Opt Mode - station is in awake state and access point can send data to station any time.
* BTCOEX_PSPOLLMODE_SCO_CONFIG - Configuration applied only during ps-poll mode.
* BTCOEX_OPTMODE_SCO_CONFIG - Configuration applied only during opt mode.
*/
#define WMI_SCO_CONFIG_FLAG_ALLOW_OPTIMIZATION (1 << 0)
#define WMI_SCO_CONFIG_FLAG_IS_EDR_CAPABLE (1 << 1)
#define WMI_SCO_CONFIG_FLAG_IS_BT_MASTER (1 << 2)
#define WMI_SCO_CONFIG_FLAG_FW_DETECT_OF_PER (1 << 3)
typedef PREPACK struct {
A_UINT32 scoSlots; /* Number of SCO Tx/Rx slots.
HVx, EV3, 2EV3 = 2 */
A_UINT32 scoIdleSlots; /* Number of Bluetooth idle slots between
consecutive SCO Tx/Rx slots
HVx, EV3 = 4
2EV3 = 10
*/
A_UINT32 scoFlags; /* SCO Options Flags :
bits: meaning:
0 Allow Close Range Optimization
1 Is EDR capable or Not
2 IS Co-located Bt role Master
3 Firmware determines the periodicity of SCO.
*/
A_UINT32 linkId; /* applicable to STE-BT - not used */
}POSTPACK BTCOEX_SCO_CONFIG;
typedef PREPACK struct {
A_UINT32 scoCyclesForceTrigger; /* Number SCO cycles after which
force a pspoll. default = 10 */
A_UINT32 scoDataResponseTimeout; /* Timeout Waiting for Downlink pkt
in response for ps-poll,
default = 20 msecs */
A_UINT32 scoStompDutyCyleVal; /* not implemented */
A_UINT32 scoStompDutyCyleMaxVal; /*Not implemented */
A_UINT32 scoPsPollLatencyFraction; /* Fraction of idle
period, within which
additional ps-polls can be queued
1 - 1/4 of idle duration
2 - 1/2 of idle duration
3 - 3/4 of idle duration
default =2 (1/2)
*/
}POSTPACK BTCOEX_PSPOLLMODE_SCO_CONFIG;
typedef PREPACK struct {
A_UINT32 scoStompCntIn100ms;/*max number of SCO stomp in 100ms allowed in
opt mode. If exceeds the configured value,
switch to ps-poll mode
default = 3 */
A_UINT32 scoContStompMax; /* max number of continous stomp allowed in opt mode.
if excedded switch to pspoll mode
default = 3 */
A_UINT32 scoMinlowRateMbps; /* Low rate threshold */
A_UINT32 scoLowRateCnt; /* number of low rate pkts (< scoMinlowRateMbps) allowed in 100 ms.
If exceeded switch/stay to ps-poll mode, lower stay in opt mode.
default = 36
*/
A_UINT32 scoHighPktRatio; /*(Total Rx pkts in 100 ms + 1)/
((Total tx pkts in 100 ms - No of high rate pkts in 100 ms) + 1) in 100 ms,
if exceeded switch/stay in opt mode and if lower switch/stay in pspoll mode.
default = 5 (80% of high rates)
*/
A_UINT32 scoMaxAggrSize; /* Max number of Rx subframes allowed in this mode. (Firmware re-negogiates
max number of aggregates if it was negogiated to higher value
default = 1
Recommended value Basic rate headsets = 1, EDR (2-EV3) =4.
*/
}POSTPACK BTCOEX_OPTMODE_SCO_CONFIG;
typedef PREPACK struct {
A_UINT32 scanInterval;
A_UINT32 maxScanStompCnt;
}POSTPACK BTCOEX_WLANSCAN_SCO_CONFIG;
typedef PREPACK struct {
BTCOEX_SCO_CONFIG scoConfig;
BTCOEX_PSPOLLMODE_SCO_CONFIG scoPspollConfig;
BTCOEX_OPTMODE_SCO_CONFIG scoOptModeConfig;
BTCOEX_WLANSCAN_SCO_CONFIG scoWlanScanConfig;
}POSTPACK WMI_SET_BTCOEX_SCO_CONFIG_CMD;
/* ------------------WMI_SET_BTCOEX_A2DP_CONFIG_CMDID -------------------*/
/* Configure A2DP profile parameters. These parameters would be used whenver firmware is indicated
* of A2DP profile on bluetooth ( via WMI_SET_BTCOEX_BT_OPERATING_STATUS_CMDID).
* Configuration of BTCOEX_A2DP_CONFIG data structure are common configuration and applies to
* ps-poll mode and opt mode.
* Ps-poll Mode - Station is in power-save and retrieves downlink data between a2dp data bursts.
* Opt Mode - station is in power save during a2dp bursts and awake in the gaps.
* BTCOEX_PSPOLLMODE_A2DP_CONFIG - Configuration applied only during ps-poll mode.
* BTCOEX_OPTMODE_A2DP_CONFIG - Configuration applied only during opt mode.
*/
#define WMI_A2DP_CONFIG_FLAG_ALLOW_OPTIMIZATION (1 << 0)
#define WMI_A2DP_CONFIG_FLAG_IS_EDR_CAPABLE (1 << 1)
#define WMI_A2DP_CONFIG_FLAG_IS_BT_ROLE_MASTER (1 << 2)
#define WMI_A2DP_CONFIG_FLAG_IS_A2DP_HIGH_PRI (1 << 3)
#define WMI_A2DP_CONFIG_FLAG_FIND_BT_ROLE (1 << 4)
typedef PREPACK struct {
A_UINT32 a2dpFlags; /* A2DP Option flags:
bits: meaning:
0 Allow Close Range Optimization
1 IS EDR capable
2 IS Co-located Bt role Master
3 a2dp traffic is high priority
4 Fw detect the role of bluetooth.
*/
A_UINT32 linkId; /* Applicable only to STE-BT - not used */
}POSTPACK BTCOEX_A2DP_CONFIG;
typedef PREPACK struct {
A_UINT32 a2dpWlanMaxDur; /* MAX time firmware uses the medium for
wlan, after it identifies the idle time
default (30 msecs) */
A_UINT32 a2dpMinBurstCnt; /* Minimum number of bluetooth data frames
to replenish Wlan Usage limit (default 3) */
A_UINT32 a2dpDataRespTimeout; /* Max duration firmware waits for downlink
by stomping on bluetooth
after ps-poll is acknowledged.
default = 20 ms
*/
}POSTPACK BTCOEX_PSPOLLMODE_A2DP_CONFIG;
typedef PREPACK struct {
A_UINT32 a2dpMinlowRateMbps; /* Low rate threshold */
A_UINT32 a2dpLowRateCnt; /* number of low rate pkts (< a2dpMinlowRateMbps) allowed in 100 ms.
If exceeded switch/stay to ps-poll mode, lower stay in opt mode.
default = 36
*/
A_UINT32 a2dpHighPktRatio; /*(Total Rx pkts in 100 ms + 1)/
((Total tx pkts in 100 ms - No of high rate pkts in 100 ms) + 1) in 100 ms,
if exceeded switch/stay in opt mode and if lower switch/stay in pspoll mode.
default = 5 (80% of high rates)
*/
A_UINT32 a2dpMaxAggrSize; /* Max number of Rx subframes allowed in this mode. (Firmware re-negogiates
max number of aggregates if it was negogiated to higher value
default = 1
Recommended value Basic rate headsets = 1, EDR (2-EV3) =8.
*/
A_UINT32 a2dpPktStompCnt; /*number of a2dp pkts that can be stomped per burst.
default = 6*/
}POSTPACK BTCOEX_OPTMODE_A2DP_CONFIG;
typedef PREPACK struct {
BTCOEX_A2DP_CONFIG a2dpConfig;
BTCOEX_PSPOLLMODE_A2DP_CONFIG a2dppspollConfig;
BTCOEX_OPTMODE_A2DP_CONFIG a2dpOptConfig;
}POSTPACK WMI_SET_BTCOEX_A2DP_CONFIG_CMD;
/*------------ WMI_SET_BTCOEX_ACLCOEX_CONFIG_CMDID---------------------*/
/* Configure non-A2dp ACL profile parameters.The starts of ACL profile can either be
* indicated via WMI_SET_BTCOEX_BT_OPERATING_STATUS_CMDID orenabled via firmware detection
* which is configured via "aclCoexFlags".
* Configration of BTCOEX_ACLCOEX_CONFIG data structure are common configuration and applies
* ps-poll mode and opt mode.
* Ps-poll Mode - Station is in power-save and retrieves downlink data during wlan medium.
* Opt Mode - station is in power save during bluetooth medium time and awake during wlan duration.
* (Not implemented yet)
*
* BTCOEX_PSPOLLMODE_ACLCOEX_CONFIG - Configuration applied only during ps-poll mode.
* BTCOEX_OPTMODE_ACLCOEX_CONFIG - Configuration applied only during opt mode.
*/
#define WMI_ACLCOEX_FLAGS_ALLOW_OPTIMIZATION (1 << 0)
#define WMI_ACLCOEX_FLAGS_DISABLE_FW_DETECTION (1 << 1)
typedef PREPACK struct {
A_UINT32 aclWlanMediumDur; /* Wlan usage time during Acl (non-a2dp)
coexistence (default 30 msecs)
*/
A_UINT32 aclBtMediumDur; /* Bt usage time during acl coexistence
(default 30 msecs)
*/
A_UINT32 aclDetectTimeout; /* BT activity observation time limit.
In this time duration, number of bt pkts are counted.
If the Cnt reaches "aclPktCntLowerLimit" value
for "aclIterToEnableCoex" iteration continuously,
firmware gets into ACL coexistence mode.
Similarly, if bt traffic count during ACL coexistence
has not reached "aclPktCntLowerLimit" continuously
for "aclIterToEnableCoex", then ACL coexistence is
disabled.
-default 100 msecs
*/
A_UINT32 aclPktCntLowerLimit; /* Acl Pkt Cnt to be received in duration of
"aclDetectTimeout" for
"aclIterForEnDis" times to enabling ACL coex.
Similar logic is used to disable acl coexistence.
(If "aclPktCntLowerLimit" cnt of acl pkts
are not seen by the for "aclIterForEnDis"
then acl coexistence is disabled).
default = 10
*/
A_UINT32 aclIterForEnDis; /* number of Iteration of "aclPktCntLowerLimit" for Enabling and
Disabling Acl Coexistence.
default = 3
*/
A_UINT32 aclPktCntUpperLimit; /* This is upperBound limit, if there is more than
"aclPktCntUpperLimit" seen in "aclDetectTimeout",
ACL coexistence is enabled right away.
- default 15*/
A_UINT32 aclCoexFlags; /* A2DP Option flags:
bits: meaning:
0 Allow Close Range Optimization
1 disable Firmware detection
(Currently supported configuration is aclCoexFlags =0)
*/
A_UINT32 linkId; /* Applicable only for STE-BT - not used */
}POSTPACK BTCOEX_ACLCOEX_CONFIG;
typedef PREPACK struct {
A_UINT32 aclDataRespTimeout; /* Max duration firmware waits for downlink
by stomping on bluetooth
after ps-poll is acknowledged.
default = 20 ms */
}POSTPACK BTCOEX_PSPOLLMODE_ACLCOEX_CONFIG;
/* Not implemented yet*/
typedef PREPACK struct {
A_UINT32 aclCoexMinlowRateMbps;
A_UINT32 aclCoexLowRateCnt;
A_UINT32 aclCoexHighPktRatio;
A_UINT32 aclCoexMaxAggrSize;
A_UINT32 aclPktStompCnt;
}POSTPACK BTCOEX_OPTMODE_ACLCOEX_CONFIG;
typedef PREPACK struct {
BTCOEX_ACLCOEX_CONFIG aclCoexConfig;
BTCOEX_PSPOLLMODE_ACLCOEX_CONFIG aclCoexPspollConfig;
BTCOEX_OPTMODE_ACLCOEX_CONFIG aclCoexOptConfig;
}POSTPACK WMI_SET_BTCOEX_ACLCOEX_CONFIG_CMD;
/* -----------WMI_SET_BTCOEX_BT_OPERATING_STATUS_CMDID ------------------*/
typedef enum {
WMI_BTCOEX_BT_PROFILE_SCO =1,
WMI_BTCOEX_BT_PROFILE_A2DP,
WMI_BTCOEX_BT_PROFILE_INQUIRY_PAGE,
WMI_BTCOEX_BT_PROFILE_ACLCOEX,
}WMI_BTCOEX_BT_PROFILE;
typedef PREPACK struct {
A_UINT32 btProfileType;
A_UINT32 btOperatingStatus;
A_UINT32 btLinkId;
}WMI_SET_BTCOEX_BT_OPERATING_STATUS_CMD;
/*--------------------- WMI_SET_BTCOEX_DEBUG_CMDID ---------------------*/
/* Used for firmware development and debugging */
typedef PREPACK struct {
A_UINT32 btcoexDbgParam1;
A_UINT32 btcoexDbgParam2;
A_UINT32 btcoexDbgParam3;
A_UINT32 btcoexDbgParam4;
A_UINT32 btcoexDbgParam5;
}WMI_SET_BTCOEX_DEBUG_CMD;
/*---------------------WMI_GET_BTCOEX_CONFIG_CMDID --------------------- */
/* Command to firmware to get configuration parameters of the bt profile
* reported via WMI_BTCOEX_CONFIG_EVENTID */
typedef PREPACK struct {
A_UINT32 btProfileType; /* 1 - SCO
2 - A2DP
3 - INQUIRY_PAGE
4 - ACLCOEX
*/
A_UINT32 linkId; /* not used */
}WMI_GET_BTCOEX_CONFIG_CMD;
/*------------------WMI_REPORT_BTCOEX_CONFIG_EVENTID------------------- */
/* Event from firmware to host, sent in response to WMI_GET_BTCOEX_CONFIG_CMDID
* */
typedef PREPACK struct {
A_UINT32 btProfileType;
A_UINT32 linkId; /* not used */
PREPACK union {
WMI_SET_BTCOEX_SCO_CONFIG_CMD scoConfigCmd;
WMI_SET_BTCOEX_A2DP_CONFIG_CMD a2dpConfigCmd;
WMI_SET_BTCOEX_ACLCOEX_CONFIG_CMD aclcoexConfig;
WMI_SET_BTCOEX_BTINQUIRY_PAGE_CONFIG_CMD btinquiryPageConfigCmd;
} POSTPACK info;
} POSTPACK WMI_BTCOEX_CONFIG_EVENT;
/*------------- WMI_REPORT_BTCOEX_BTCOEX_STATS_EVENTID--------------------*/
/* Used for firmware development and debugging*/
typedef PREPACK struct {
A_UINT32 highRatePktCnt;
A_UINT32 firstBmissCnt;
A_UINT32 psPollFailureCnt;
A_UINT32 nullFrameFailureCnt;
A_UINT32 optModeTransitionCnt;
}BTCOEX_GENERAL_STATS;
typedef PREPACK struct {
A_UINT32 scoStompCntAvg;
A_UINT32 scoStompIn100ms;
A_UINT32 scoMaxContStomp;
A_UINT32 scoAvgNoRetries;
A_UINT32 scoMaxNoRetriesIn100ms;
}BTCOEX_SCO_STATS;
typedef PREPACK struct {
A_UINT32 a2dpBurstCnt;
A_UINT32 a2dpMaxBurstCnt;
A_UINT32 a2dpAvgIdletimeIn100ms;
A_UINT32 a2dpAvgStompCnt;
}BTCOEX_A2DP_STATS;
typedef PREPACK struct {
A_UINT32 aclPktCntInBtTime;
A_UINT32 aclStompCntInWlanTime;
A_UINT32 aclPktCntIn100ms;
}BTCOEX_ACLCOEX_STATS;
typedef PREPACK struct {
BTCOEX_GENERAL_STATS coexStats;
BTCOEX_SCO_STATS scoStats;
BTCOEX_A2DP_STATS a2dpStats;
BTCOEX_ACLCOEX_STATS aclCoexStats;
}WMI_BTCOEX_STATS_EVENT;
/*--------------------------END OF BTCOEX -------------------------------------*/
/* WAC commands
*/
typedef PREPACK struct {
A_UINT32 period;
A_UINT32 threshold;
A_INT32 rssi;
A_BOOL enable;
A_CHAR wps_pin[8];
}WMI_WAC_ENABLE_CMD;
typedef enum {
WAC_MORE_SCAN = -1,
WAC_SEND_PROBE_IDX = 0,
}WAC_SUBCMD;
typedef PREPACK struct {
WAC_SUBCMD cmdid;
}WMI_WAC_SCAN_REPLY_CMD;
typedef PREPACK struct {
A_UINT8 req;
A_UINT8 cmd;
A_UINT8 frame;
A_UINT8 ie[64];
A_INT32 status;
}WMI_WAC_CTRL_REQ_CMD;
/* END OF WAC */
typedef PREPACK struct {
A_UINT32 sleepState;
}WMI_REPORT_SLEEP_STATE_EVENT;
typedef enum {
WMI_REPORT_SLEEP_STATUS_IS_DEEP_SLEEP =0,
WMI_REPORT_SLEEP_STATUS_IS_AWAKE
} WMI_REPORT_SLEEP_STATUS;
typedef enum {
DISCONN_EVT_IN_RECONN = 0, /* default */
NO_DISCONN_EVT_IN_RECONN
} TARGET_EVENT_REPORT_CONFIG;
typedef PREPACK struct {
A_UINT32 evtConfig;
} POSTPACK WMI_SET_TARGET_EVENT_REPORT_CMD;
typedef PREPACK struct {
A_UINT16 cmd_buf_sz; /* HCI cmd buffer size */
A_UINT8 buf[1]; /* Absolute HCI cmd */
} POSTPACK WMI_HCI_CMD;
/*
* Command Replies
*/
/*
* WMI_GET_CHANNEL_LIST_CMDID reply
*/
typedef PREPACK struct {
A_UINT8 reserved1;
A_UINT8 numChannels; /* number of channels in reply */
A_UINT16 channelList[1]; /* channel in Mhz */
} POSTPACK WMI_CHANNEL_LIST_REPLY;
typedef enum {
A_SUCCEEDED = A_OK,
A_FAILED_DELETE_STREAM_DOESNOT_EXIST=250,
A_SUCCEEDED_MODIFY_STREAM=251,
A_FAILED_INVALID_STREAM = 252,
A_FAILED_MAX_THINSTREAMS = 253,
A_FAILED_CREATE_REMOVE_PSTREAM_FIRST = 254,
} PSTREAM_REPLY_STATUS;
typedef PREPACK struct {
A_UINT8 status; /* PSTREAM_REPLY_STATUS */
A_UINT8 txQueueNumber;
A_UINT8 rxQueueNumber;
A_UINT8 trafficClass;
A_UINT8 trafficDirection; /* DIR_TYPE */
} POSTPACK WMI_CRE_PRIORITY_STREAM_REPLY;
typedef PREPACK struct {
A_UINT8 status; /* PSTREAM_REPLY_STATUS */
A_UINT8 txQueueNumber;
A_UINT8 rxQueueNumber;
A_UINT8 trafficDirection; /* DIR_TYPE */
A_UINT8 trafficClass;
} POSTPACK WMI_DEL_PRIORITY_STREAM_REPLY;
#ifdef TIME_BASED_DISCARD
/*
* WMI_SET_TBD_TIME_CMDID
*/
typedef PREPACK struct{
A_UINT32 discardDispostion:1;
A_UINT32 txdiscardTime:31;
} POSTPACK WMI_SET_TBD_TIME;
extern WMI_SET_TBD_TIME *txDiscard ;
#endif
/*
* List of Events (target to host)
*/
typedef enum {
WMI_READY_EVENTID = 0x1001,
WMI_CONNECT_EVENTID,
WMI_DISCONNECT_EVENTID,
WMI_BSSINFO_EVENTID,
WMI_CMDERROR_EVENTID,
WMI_REGDOMAIN_EVENTID,
WMI_PSTREAM_TIMEOUT_EVENTID,
WMI_NEIGHBOR_REPORT_EVENTID,
WMI_TKIP_MICERR_EVENTID,
WMI_SCAN_COMPLETE_EVENTID, /* 0x100a */
WMI_REPORT_STATISTICS_EVENTID,
WMI_RSSI_THRESHOLD_EVENTID,
WMI_ERROR_REPORT_EVENTID,
WMI_OPT_RX_FRAME_EVENTID,
WMI_REPORT_ROAM_TBL_EVENTID,
WMI_EXTENSION_EVENTID,
WMI_CAC_EVENTID,
WMI_SNR_THRESHOLD_EVENTID,
WMI_LQ_THRESHOLD_EVENTID,
WMI_TX_RETRY_ERR_EVENTID, /* 0x1014 */
WMI_REPORT_ROAM_DATA_EVENTID,
WMI_TEST_EVENTID,
WMI_APLIST_EVENTID,
WMI_GET_WOW_LIST_EVENTID,
WMI_GET_PMKID_LIST_EVENTID,
WMI_CHANNEL_CHANGE_EVENTID,
WMI_PEER_NODE_EVENTID,
WMI_PSPOLL_EVENTID,
WMI_DTIMEXPIRY_EVENTID,
WMI_WLAN_VERSION_EVENTID,
WMI_SET_PARAMS_REPLY_EVENTID,
WMI_ADDBA_REQ_EVENTID, /*0x1020 */
WMI_ADDBA_RESP_EVENTID,
WMI_DELBA_REQ_EVENTID,
WMI_TX_COMPLETE_EVENTID,
WMI_HCI_EVENT_EVENTID,
WMI_ACL_DATA_EVENTID,
WMI_REPORT_SLEEP_STATE_EVENTID,
WMI_WAPI_REKEY_EVENTID,
WMI_REPORT_BTCOEX_STATS_EVENTID,
WMI_REPORT_BTCOEX_CONFIG_EVENTID,
WMI_GET_PMK_EVENTID,
/* DFS Events */
WMI_DFS_HOST_ATTACH_EVENTID, /* 102B */
WMI_DFS_HOST_INIT_EVENTID,
WMI_DFS_RESET_DELAYLINES_EVENTID,
WMI_DFS_RESET_RADARQ_EVENTID,
WMI_DFS_RESET_AR_EVENTID,
WMI_DFS_RESET_ARQ_EVENTID,
WMI_DFS_SET_DUR_MULTIPLIER_EVENTID,
WMI_DFS_SET_BANGRADAR_EVENTID,
WMI_DFS_SET_DEBUGLEVEL_EVENTID,
WMI_DFS_PHYERR_EVENTID,
/* CCX Evants */
WMI_CCX_RM_STATUS_EVENTID, /* 1035 */
/* P2P Events */
WMI_P2P_GO_NEG_RESULT_EVENTID, /* 1036 */
WMI_WAC_SCAN_DONE_EVENTID,
WMI_WAC_REPORT_BSS_EVENTID,
WMI_WAC_START_WPS_EVENTID,
WMI_WAC_CTRL_REQ_REPLY_EVENTID,
WMI_REPORT_WMM_PARAMS_EVENTID,
WMI_WAC_REJECT_WPS_EVENTID,
/* More P2P Events */
WMI_P2P_GO_NEG_REQ_EVENTID,
WMI_P2P_INVITE_REQ_EVENTID,
WMI_P2P_INVITE_RCVD_RESULT_EVENTID,
WMI_P2P_INVITE_SENT_RESULT_EVENTID,
WMI_P2P_PROV_DISC_RESP_EVENTID,
WMI_P2P_PROV_DISC_REQ_EVENTID,
/*RFKILL Events*/
WMI_RFKILL_STATE_CHANGE_EVENTID,
WMI_RFKILL_GET_MODE_CMD_EVENTID,
WMI_P2P_START_SDPD_EVENTID,
WMI_P2P_SDPD_RX_EVENTID,
/* Special event used to notify host that AR6003
* has processed sleep command (needed to prevent
* a late incoming credit report from crashing
* the system)
*/
WMI_SET_HOST_SLEEP_MODE_CMD_PROCESSED_EVENTID,
WMI_THIN_RESERVED_START_EVENTID = 0x8000,
/* Events in this range are reserved for thinmode
* See wmi_thin.h for actual definitions */
WMI_THIN_RESERVED_END_EVENTID = 0x8fff,
WMI_SET_CHANNEL_EVENTID,
WMI_ASSOC_REQ_EVENTID,
/* generic ACS event */
WMI_ACS_EVENTID,
WMI_STORERECALL_STORE_EVENTID,
WMI_WOW_EXT_WAKE_EVENTID,
WMI_GTK_OFFLOAD_STATUS_EVENTID,
WMI_NETWORK_LIST_OFFLOAD_EVENTID,
WMI_REMAIN_ON_CHNL_EVENTID,
WMI_CANCEL_REMAIN_ON_CHNL_EVENTID,
WMI_TX_STATUS_EVENTID,
WMI_RX_PROBE_REQ_EVENTID,
WMI_P2P_CAPABILITIES_EVENTID,
WMI_RX_ACTION_EVENTID,
WMI_P2P_INFO_EVENTID,
/*WMI Location API Commands*/
#ifdef WLAN_LOCATION_SUPPORT
WMI_RTT_MEASRESP_EVENTID,
WMI_RTT_CAPRESP_EVENTID,
WMI_RTT_STATUSRESP_EVENTID,
#endif
/* WPS Events */
WMI_WPS_GET_STATUS_EVENTID,
WMI_WPS_PROFILE_EVENTID,
/* more P2P events */
WMI_NOA_INFO_EVENTID,
WMI_OPPPS_INFO_EVENTID,
WMI_PORT_STATUS_EVENTID,
/* 802.11w */
WMI_GET_RSN_CAP_EVENTID,
} WMI_EVENT_ID;
typedef enum {
WMI_11A_CAPABILITY = 1,
WMI_11G_CAPABILITY = 2,
WMI_11AG_CAPABILITY = 3,
WMI_11NA_CAPABILITY = 4,
WMI_11NG_CAPABILITY = 5,
WMI_11NAG_CAPABILITY = 6,
// END CAPABILITY
WMI_11N_CAPABILITY_OFFSET = (WMI_11NA_CAPABILITY - WMI_11A_CAPABILITY),
} WMI_PHY_CAPABILITY;
typedef PREPACK struct {
A_UINT8 macaddr[ATH_MAC_LEN];
A_UINT8 phyCapability; /* WMI_PHY_CAPABILITY */
} POSTPACK WMI_READY_EVENT_1;
typedef PREPACK struct {
A_UINT32 sw_version;
A_UINT32 abi_version;
A_UINT8 macaddr[ATH_MAC_LEN];
A_UINT8 phyCapability; /* WMI_PHY_CAPABILITY */
} POSTPACK WMI_READY_EVENT_2;
#if defined(ATH_TARGET)
#ifdef AR6002_REV2
#define WMI_READY_EVENT WMI_READY_EVENT_1 /* AR6002_REV2 target code */
#else
#define WMI_READY_EVENT WMI_READY_EVENT_2 /* AR6001, AR6002_REV4, AR6002_REV6 */
#endif
#else
#define WMI_READY_EVENT WMI_READY_EVENT_2 /* host code */
#endif
/*
* Connect Event
*
* In STA mode networkType comes along with connected phy mode
* To get networkType, WMI_NETWORK_TYPE (networkType)
* To get connected phymode, WMI_CONNECTED_PHYMODE(networkType)
* will give the phymode value.
*/
typedef PREPACK struct {
PREPACK union {
struct {
A_UINT16 channel;
A_UINT8 bssid[ATH_MAC_LEN];
A_UINT16 listenInterval;
A_UINT16 beaconInterval;
#if defined(EXTENDED_TX_COMPLETE)
A_UINT16 networkType;
A_UINT8 aid;
A_UINT8 unused;
#else
A_UINT32 networkType;
#endif /* EXTENDED_TX_COMPLETE */
} infra_ibss_bss;
struct {
A_UINT8 phymode;
A_UINT8 aid;
A_UINT8 mac_addr[ATH_MAC_LEN];
A_UINT8 auth;
A_UINT8 keymgmt;
A_UINT16 cipher;
A_UINT8 apsd_info;
A_UINT8 unused[3];
} ap_sta;
struct {
A_UINT16 channel;
A_UINT8 bssid[ATH_MAC_LEN];
A_UINT8 unused[8];
} ap_bss;
} POSTPACK u;
A_UINT8 beaconIeLen;
A_UINT8 assocReqLen;
A_UINT8 assocRespLen;
A_UINT8 assocInfo[1];
} POSTPACK WMI_CONNECT_EVENT;
typedef struct {
A_UINT8 status;
A_UINT8 rspType;
} WMI_ASSOCREQ_EVENT;
typedef PREPACK struct {
A_UINT8 host_accept;
A_UINT8 host_reasonCode;
A_UINT8 target_status;
A_UINT8 sta_mac_addr[ATH_MAC_LEN];
A_UINT8 rspType;
} POSTPACK WMI_SEND_ASSOCRES_CMD;
typedef struct {
A_UINT8 enable;
} WMI_SET_ASSOCREQ_RELAY;
/*
* Disconnect Event
*/
typedef enum {
NO_NETWORK_AVAIL = 0x01,
LOST_LINK = 0x02, /* bmiss */
DISCONNECT_CMD = 0x03,
BSS_DISCONNECTED = 0x04,
AUTH_FAILED = 0x05,
ASSOC_FAILED = 0x06,
NO_RESOURCES_AVAIL = 0x07,
CSERV_DISCONNECT = 0x08,
INVALID_PROFILE = 0x0a,
DOT11H_CHANNEL_SWITCH = 0x0b,
PROFILE_MISMATCH = 0x0c,
CONNECTION_EVICTED = 0x0d,
IBSS_MERGE = 0x0e,
EXCESS_TX_RETRY = 0x0f, /* TX frames failed after excessive retries */
SEC_HS_TO_RECV_M1 = 0x10, /* Security 4-way handshake timed out waiting for M1 */
SEC_HS_TO_RECV_M3 = 0x11, /* Security 4-way handshake timed out waiting for M3 */
TKIP_COUNTERMEASURES = 0x12,
MLME_TIMEOUT = 0x13,
CCX_TARGET_ROAMING_INDICATION = 0xfd, /* hack for CCX AP-Assisted roaming*/
CCKM_ROAMING_INDICATION = 0xfe, /* hack for CCKM fast roaming */
} WMI_DISCONNECT_REASON;
typedef PREPACK struct {
A_UINT16 protocolReasonStatus; /* reason code, see 802.11 spec. */
A_UINT8 bssid[ATH_MAC_LEN]; /* set if known */
A_UINT8 disconnectReason ; /* see WMI_DISCONNECT_REASON */
A_UINT8 assocRespLen;
A_UINT8 assocInfo[1];
} POSTPACK WMI_DISCONNECT_EVENT;
/*
* BSS Info Event.
* Mechanism used to inform host of the presence and characteristic of
* wireless networks present. Consists of bss info header followed by
* the beacon or probe-response frame body. The 802.11 header is not included.
*/
typedef enum {
BEACON_FTYPE = 0x1,
PROBERESP_FTYPE,
ACTION_MGMT_FTYPE,
PROBEREQ_FTYPE,
} WMI_BI_FTYPE;
enum {
BSS_ELEMID_CHANSWITCH = 0x01,
BSS_ELEMID_ATHEROS = 0x02,
};
typedef PREPACK struct {
A_UINT16 channel;
A_UINT8 frameType; /* see WMI_BI_FTYPE */
A_UINT8 snr;
A_INT16 rssi;
A_UINT8 bssid[ATH_MAC_LEN];
A_UINT32 ieMask;
} POSTPACK WMI_BSS_INFO_HDR;
/*
* BSS INFO HDR version 2.0
* With 6 bytes HTC header and 6 bytes of WMI header
* WMI_BSS_INFO_HDR cannot be accomodated in the removed 802.11 management
* header space.
* - Reduce the ieMask to 2 bytes as only two bit flags are used
* - Remove rssi and compute it on the host. rssi = snr - 95
*/
typedef PREPACK struct {
A_UINT16 channel;
A_UINT8 frameType; /* see WMI_BI_FTYPE */
A_UINT8 snr;
A_UINT8 bssid[ATH_MAC_LEN];
A_UINT16 ieMask;
} POSTPACK WMI_BSS_INFO_HDR2;
typedef PREPACK struct {
A_UINT8 bssid[ATH_MAC_LEN];
A_UINT8 pin[8];
} POSTPACK WMI_WPS_PIN_INFO;
typedef PREPACK struct {
PREPACK union {
A_UINT8 ie[17];
A_INT32 wac_status;
} POSTPACK info;
} POSTPACK WMI_GET_WAC_INFO;
#define IEEE80211_NWID_LEN 32
typedef PREPACK struct {
A_UINT8 bssid[ATH_MAC_LEN];
A_UINT8 ssid[IEEE80211_NWID_LEN];
A_UINT8 ssid_len;
A_UINT8 channel;
A_UINT8 snr;
A_UINT8 id;
A_UINT8 device_type;
A_UINT8 antenna_type;
A_INT8 threshold_offset1; /* offset for AP Tx power */
A_INT8 threshold_offset2; /* offset for antenna gain */
} POSTPACK WMI_WAC_BSS_INFO_REPORT;
/*
* Command Error Event
*/
typedef enum {
INVALID_PARAM = 0x01,
ILLEGAL_STATE = 0x02,
INTERNAL_ERROR = 0x03,
DFS_CHANNEL = 0x05,
} WMI_ERROR_CODE;
typedef PREPACK struct {
A_UINT16 commandId;
A_UINT8 errorCode;
} POSTPACK WMI_CMD_ERROR_EVENT;
/*
* New Regulatory Domain Event
*/
typedef PREPACK struct {
A_UINT32 regDomain;
} POSTPACK WMI_REG_DOMAIN_EVENT;
typedef PREPACK struct {
A_UINT8 txQueueNumber;
A_UINT8 rxQueueNumber;
A_UINT8 trafficDirection;
A_UINT8 trafficClass;
} POSTPACK WMI_PSTREAM_TIMEOUT_EVENT;
/*
* The WMI_NEIGHBOR_REPORT Event is generated by the target to inform
* the host of BSS's it has found that matches the current profile.
* It can be used by the host to cache PMKs and/to initiate pre-authentication
* if the BSS supports it. The first bssid is always the current associated
* BSS.
* The bssid and bssFlags information repeats according to the number
* or APs reported.
*/
typedef enum {
WMI_DEFAULT_BSS_FLAGS = 0x00,
WMI_PREAUTH_CAPABLE_BSS = 0x01,
WMI_PMKID_VALID_BSS = 0x02,
} WMI_BSS_FLAGS;
typedef PREPACK struct {
A_UINT8 bssid[ATH_MAC_LEN];
A_UINT8 bssFlags; /* see WMI_BSS_FLAGS */
} POSTPACK WMI_NEIGHBOR_INFO;
typedef PREPACK struct {
A_INT8 numberOfAps;
WMI_NEIGHBOR_INFO neighbor[1];
} POSTPACK WMI_NEIGHBOR_REPORT_EVENT;
/*
* TKIP MIC Error Event
*/
typedef PREPACK struct {
A_UINT8 keyid;
A_UINT8 ismcast;
} POSTPACK WMI_TKIP_MICERR_EVENT;
/*
* WMI_SCAN_COMPLETE_EVENTID - no parameters (old), staus parameter (new)
*/
typedef PREPACK struct {
A_INT32 status;
} POSTPACK WMI_SCAN_COMPLETE_EVENT;
typedef PREPACK struct {
A_INT32 rm_type;
A_INT32 status;
} POSTPACK WMI_CCX_RM_STATUS_EVENT;
#define MAX_OPT_DATA_LEN 1400
/*
* WMI_SET_ADHOC_BSSID_CMDID
*/
typedef PREPACK struct {
A_UINT8 bssid[ATH_MAC_LEN];
} POSTPACK WMI_SET_ADHOC_BSSID_CMD;
/*
* Special frame receive Event.
* Mechanism used to inform host of the receiption of the special frames.
* Consists of special frame info header followed by special frame body.
* The 802.11 header is not included.
*/
typedef PREPACK struct {
A_UINT16 channel;
A_UINT8 frameType; /* see WMI_OPT_FTYPE */
A_INT8 snr;
A_UINT8 srcAddr[ATH_MAC_LEN];
A_UINT8 bssid[ATH_MAC_LEN];
} POSTPACK WMI_OPT_RX_INFO_HDR;
/*
* Reporting statistics.
*/
typedef PREPACK struct {
A_UINT32 tx_packets;
A_UINT32 tx_bytes;
A_UINT32 tx_unicast_pkts;
A_UINT32 tx_unicast_bytes;
A_UINT32 tx_multicast_pkts;
A_UINT32 tx_multicast_bytes;
A_UINT32 tx_broadcast_pkts;
A_UINT32 tx_broadcast_bytes;
A_UINT32 tx_rts_success_cnt;
A_UINT32 tx_packet_per_ac[4];
A_UINT32 tx_errors_per_ac[4];
A_UINT32 tx_errors;
A_UINT32 tx_failed_cnt;
A_UINT32 tx_retry_cnt;
A_UINT32 tx_mult_retry_cnt;
A_UINT32 tx_rts_fail_cnt;
A_INT32 tx_unicast_rate;
}POSTPACK tx_stats_t;
typedef PREPACK struct {
A_UINT32 rx_packets;
A_UINT32 rx_bytes;
A_UINT32 rx_unicast_pkts;
A_UINT32 rx_unicast_bytes;
A_UINT32 rx_multicast_pkts;
A_UINT32 rx_multicast_bytes;
A_UINT32 rx_broadcast_pkts;
A_UINT32 rx_broadcast_bytes;
A_UINT32 rx_fragment_pkt;
A_UINT32 rx_errors;
A_UINT32 rx_crcerr;
A_UINT32 rx_key_cache_miss;
A_UINT32 rx_decrypt_err;
A_UINT32 rx_duplicate_frames;
A_INT32 rx_unicast_rate;
}POSTPACK rx_stats_t;
typedef PREPACK struct {
A_UINT32 tkip_local_mic_failure;
A_UINT32 tkip_counter_measures_invoked;
A_UINT32 tkip_replays;
A_UINT32 tkip_format_errors;
A_UINT32 ccmp_format_errors;
A_UINT32 ccmp_replays;
}POSTPACK tkip_ccmp_stats_t;
typedef PREPACK struct {
A_UINT32 power_save_failure_cnt;
A_UINT16 stop_tx_failure_cnt;
A_UINT16 atim_tx_failure_cnt;
A_UINT16 atim_rx_failure_cnt;
A_UINT16 bcn_rx_failure_cnt;
}POSTPACK pm_stats_t;
typedef PREPACK struct {
A_UINT32 cs_bmiss_cnt;
A_UINT32 cs_lowRssi_cnt;
A_UINT16 cs_connect_cnt;
A_UINT16 cs_disconnect_cnt;
A_INT16 cs_aveBeacon_rssi;
A_UINT16 cs_roam_count;
A_INT16 cs_rssi;
A_UINT8 cs_snr;
A_UINT8 cs_aveBeacon_snr;
A_UINT8 cs_lastRoam_msec;
} POSTPACK cserv_stats_t;
typedef PREPACK struct {
tx_stats_t tx_stats;
rx_stats_t rx_stats;
tkip_ccmp_stats_t tkipCcmpStats;
}POSTPACK wlan_net_stats_t;
typedef PREPACK struct {
A_UINT32 arp_received;
A_UINT32 arp_matched;
A_UINT32 arp_replied;
} POSTPACK arp_stats_t;
typedef PREPACK struct {
A_UINT32 wow_num_pkts_dropped;
A_UINT16 wow_num_events_discarded;
A_UINT8 wow_num_host_pkt_wakeups;
A_UINT8 wow_num_host_event_wakeups;
} POSTPACK wlan_wow_stats_t;
typedef PREPACK struct {
A_UINT32 lqVal;
A_INT32 noise_floor_calibation;
pm_stats_t pmStats;
wlan_net_stats_t txrxStats;
wlan_wow_stats_t wowStats;
arp_stats_t arpStats;
cserv_stats_t cservStats;
} POSTPACK WMI_TARGET_STATS;
/*
* WMI_RSSI_THRESHOLD_EVENTID.
* Indicate the RSSI events to host. Events are indicated when we breach a
* thresold value.
*/
typedef enum{
WMI_RSSI_THRESHOLD1_ABOVE = 0,
WMI_RSSI_THRESHOLD2_ABOVE,
WMI_RSSI_THRESHOLD3_ABOVE,
WMI_RSSI_THRESHOLD4_ABOVE,
WMI_RSSI_THRESHOLD5_ABOVE,
WMI_RSSI_THRESHOLD6_ABOVE,
WMI_RSSI_THRESHOLD1_BELOW,
WMI_RSSI_THRESHOLD2_BELOW,
WMI_RSSI_THRESHOLD3_BELOW,
WMI_RSSI_THRESHOLD4_BELOW,
WMI_RSSI_THRESHOLD5_BELOW,
WMI_RSSI_THRESHOLD6_BELOW
}WMI_RSSI_THRESHOLD_VAL;
typedef PREPACK struct {
A_INT16 rssi;
A_UINT8 range;
}POSTPACK WMI_RSSI_THRESHOLD_EVENT;
/*
* WMI_ERROR_REPORT_EVENTID
*/
typedef enum{
WMI_TARGET_PM_ERR_FAIL = 0x00000001,
WMI_TARGET_KEY_NOT_FOUND = 0x00000002,
WMI_TARGET_DECRYPTION_ERR = 0x00000004,
WMI_TARGET_BMISS = 0x00000008,
WMI_PSDISABLE_NODE_JOIN = 0x00000010,
WMI_TARGET_COM_ERR = 0x00000020,
WMI_TARGET_FATAL_ERR = 0x00000040,
WMI_TARGET_BCN_FOUND = 0x00000080
} WMI_TARGET_ERROR_VAL;
typedef PREPACK struct {
A_UINT32 errorVal;
}POSTPACK WMI_TARGET_ERROR_REPORT_EVENT;
typedef PREPACK struct {
A_UINT8 retrys;
}POSTPACK WMI_TX_RETRY_ERR_EVENT;
typedef enum{
WMI_SNR_THRESHOLD1_ABOVE = 1,
WMI_SNR_THRESHOLD1_BELOW,
WMI_SNR_THRESHOLD2_ABOVE,
WMI_SNR_THRESHOLD2_BELOW,
WMI_SNR_THRESHOLD3_ABOVE,
WMI_SNR_THRESHOLD3_BELOW,
WMI_SNR_THRESHOLD4_ABOVE,
WMI_SNR_THRESHOLD4_BELOW
} WMI_SNR_THRESHOLD_VAL;
typedef PREPACK struct {
A_UINT8 range; /* WMI_SNR_THRESHOLD_VAL */
A_UINT8 snr;
}POSTPACK WMI_SNR_THRESHOLD_EVENT;
typedef enum{
WMI_LQ_THRESHOLD1_ABOVE = 1,
WMI_LQ_THRESHOLD1_BELOW,
WMI_LQ_THRESHOLD2_ABOVE,
WMI_LQ_THRESHOLD2_BELOW,
WMI_LQ_THRESHOLD3_ABOVE,
WMI_LQ_THRESHOLD3_BELOW,
WMI_LQ_THRESHOLD4_ABOVE,
WMI_LQ_THRESHOLD4_BELOW
} WMI_LQ_THRESHOLD_VAL;
typedef PREPACK struct {
A_INT32 lq;
A_UINT8 range; /* WMI_LQ_THRESHOLD_VAL */
}POSTPACK WMI_LQ_THRESHOLD_EVENT;
/*
* WMI_REPORT_ROAM_TBL_EVENTID
*/
#define MAX_ROAM_TBL_CAND 5
typedef PREPACK struct {
A_INT32 roam_util;
A_UINT8 bssid[ATH_MAC_LEN];
A_INT8 rssi;
A_INT8 rssidt;
A_INT8 last_rssi;
A_INT8 util;
A_INT8 bias;
A_UINT8 reserved; /* For alignment */
} POSTPACK WMI_BSS_ROAM_INFO;
typedef PREPACK struct {
A_UINT16 roamMode;
A_UINT16 numEntries;
WMI_BSS_ROAM_INFO bssRoamInfo[1];
} POSTPACK WMI_TARGET_ROAM_TBL;
/*
* WMI_HCI_EVENT_EVENTID
*/
typedef PREPACK struct {
A_UINT16 evt_buf_sz; /* HCI event buffer size */
A_UINT8 buf[1]; /* HCI event */
} POSTPACK WMI_HCI_EVENT;
/*
* WMI_CAC_EVENTID
*/
typedef enum {
CAC_INDICATION_ADMISSION = 0x00,
CAC_INDICATION_ADMISSION_RESP = 0x01,
CAC_INDICATION_DELETE = 0x02,
CAC_INDICATION_NO_RESP = 0x03,
}CAC_INDICATION;
#define WMM_TSPEC_IE_LEN 63
typedef PREPACK struct {
A_UINT8 ac;
A_UINT8 cac_indication;
A_UINT8 statusCode;
A_UINT8 tspecSuggestion[WMM_TSPEC_IE_LEN];
}POSTPACK WMI_CAC_EVENT;
/*
* WMI_APLIST_EVENTID
*/
typedef enum {
APLIST_VER1 = 1,
} APLIST_VER;
typedef PREPACK struct {
A_UINT8 bssid[ATH_MAC_LEN];
A_UINT16 channel;
} POSTPACK WMI_AP_INFO_V1;
typedef PREPACK union {
WMI_AP_INFO_V1 apInfoV1;
} POSTPACK WMI_AP_INFO;
typedef PREPACK struct {
A_UINT8 apListVer;
A_UINT8 numAP;
WMI_AP_INFO apList[1];
} POSTPACK WMI_APLIST_EVENT;
/*
* developer commands
*/
/*
* WMI_SET_BITRATE_CMDID
*
* Get bit rate cmd uses same definition as set bit rate cmd
*
*/
typedef enum {
RATE_AUTO = -1,
AR6003_RATE_1Mb = 0,
AR6003_RATE_2Mb = 1,
AR6003_RATE_5_5Mb = 2,
AR6003_RATE_11Mb = 3,
AR6003_RATE_6Mb = 4,
AR6003_RATE_9Mb = 5,
AR6003_RATE_12Mb = 6,
AR6003_RATE_18Mb = 7,
AR6003_RATE_24Mb = 8,
AR6003_RATE_36Mb = 9,
AR6003_RATE_48Mb = 10,
AR6003_RATE_54Mb = 11,
AR6003_RATE_MCS_0_20 = 12,
AR6003_RATE_MCS_1_20 = 13,
AR6003_RATE_MCS_2_20 = 14,
AR6003_RATE_MCS_3_20 = 15,
AR6003_RATE_MCS_4_20 = 16,
AR6003_RATE_MCS_5_20 = 17,
AR6003_RATE_MCS_6_20 = 18,
AR6003_RATE_MCS_7_20 = 19,
AR6003_RATE_MCS_0_40 = 20,
AR6003_RATE_MCS_1_40 = 21,
AR6003_RATE_MCS_2_40 = 22,
AR6003_RATE_MCS_3_40 = 23,
AR6003_RATE_MCS_4_40 = 24,
AR6003_RATE_MCS_5_40 = 25,
AR6003_RATE_MCS_6_40 = 26,
AR6003_RATE_MCS_7_40 = 27,
AR6003_RATE_MAX,
AR6004_RATE_1Mb = 0,
AR6004_RATE_2Mb = 1,
AR6004_RATE_5_5Mb = 2,
AR6004_RATE_11Mb = 3,
AR6004_RATE_6Mb = 4,
AR6004_RATE_9Mb = 5,
AR6004_RATE_12Mb = 6,
AR6004_RATE_18Mb = 7,
AR6004_RATE_24Mb = 8,
AR6004_RATE_36Mb = 9,
AR6004_RATE_48Mb = 10,
AR6004_RATE_54Mb = 11,
AR6004_RATE_MCS_0_20 = 12,
AR6004_RATE_MCS_1_20 = 13,
AR6004_RATE_MCS_2_20 = 14,
AR6004_RATE_MCS_3_20 = 15,
AR6004_RATE_MCS_4_20 = 16,
AR6004_RATE_MCS_5_20 = 17,
AR6004_RATE_MCS_6_20 = 18,
AR6004_RATE_MCS_7_20 = 19,
AR6004_RATE_MCS_8_20 = 20,
AR6004_RATE_MCS_9_20 = 21,
AR6004_RATE_MCS_10_20 = 22,
AR6004_RATE_MCS_11_20 = 23,
AR6004_RATE_MCS_12_20 = 24,
AR6004_RATE_MCS_13_20 = 25,
AR6004_RATE_MCS_14_20 = 26,
AR6004_RATE_MCS_15_20 = 27,
AR6004_RATE_MCS_0_40 = 28,
AR6004_RATE_MCS_1_40 = 29,
AR6004_RATE_MCS_2_40 = 30,
AR6004_RATE_MCS_3_40 = 31,
AR6004_RATE_MCS_4_40 = 32,
AR6004_RATE_MCS_5_40 = 33,
AR6004_RATE_MCS_6_40 = 34,
AR6004_RATE_MCS_7_40 = 35,
AR6004_RATE_MCS_8_40 = 36,
AR6004_RATE_MCS_9_40 = 37,
AR6004_RATE_MCS_10_40 = 38,
AR6004_RATE_MCS_11_40 = 39,
AR6004_RATE_MCS_12_40 = 40,
AR6004_RATE_MCS_13_40 = 41,
AR6004_RATE_MCS_14_40 = 42,
AR6004_RATE_MCS_15_40 = 43,
AR6004_RATE_MAX,
} WMI_BIT_RATE;
typedef PREPACK struct {
A_INT8 rateIndex; /* see WMI_BIT_RATE */
A_INT8 mgmtRateIndex;
A_INT8 ctlRateIndex;
} POSTPACK WMI_BIT_RATE_CMD;
typedef PREPACK struct {
A_INT8 rateIndex; /* see WMI_BIT_RATE */
} POSTPACK WMI_BIT_RATE_REPLY;
/*
* WMI_SET_FIXRATES_CMDID
*
* Get fix rates cmd uses same definition as set fix rates cmd
* Fix rate mask is now 64 bit, which is split across two words.
* Refer WMI_BIT_RATE for bit position for each rate.
*/
#define FIX_RATE_1Mb ((A_UINT32)0x1)
#define FIX_RATE_2Mb ((A_UINT32)0x2)
#define FIX_RATE_5_5Mb ((A_UINT32)0x4)
#define FIX_RATE_11Mb ((A_UINT32)0x8)
#define FIX_RATE_6Mb ((A_UINT32)0x10)
#define FIX_RATE_9Mb ((A_UINT32)0x20)
#define FIX_RATE_12Mb ((A_UINT32)0x40)
#define FIX_RATE_18Mb ((A_UINT32)0x80)
#define FIX_RATE_24Mb ((A_UINT32)0x100)
#define FIX_RATE_36Mb ((A_UINT32)0x200)
#define FIX_RATE_48Mb ((A_UINT32)0x400)
#define FIX_RATE_54Mb ((A_UINT32)0x800)
typedef PREPACK struct {
A_UINT32 fixRateMask[WMI_MAX_RATE_MASK]; /* see WMI_BIT_RATE */
} POSTPACK WMI_FIX_RATES_CMD, WMI_FIX_RATES_REPLY;
typedef PREPACK struct {
A_UINT8 bEnableMask;
A_UINT8 frameType; /* type and subtype */
A_UINT8 reserved[2]; /* for alignment */
A_UINT32 frameRateMask[WMI_MAX_RATE_MASK]; /* see WMI_BIT_RATE */
} POSTPACK WMI_FRAME_RATES_CMD, WMI_FRAME_RATES_REPLY;
/*
* WMI_SET_RECONNECT_AUTH_MODE_CMDID
*
* Set authentication mode
*/
typedef enum {
RECONN_DO_AUTH = 0x00,
RECONN_NOT_AUTH = 0x01
} WMI_AUTH_MODE;
typedef PREPACK struct {
A_UINT8 mode;
} POSTPACK WMI_SET_AUTH_MODE_CMD;
/*
* WMI_SET_REASSOC_MODE_CMDID
*
* Set authentication mode
*/
typedef enum {
REASSOC_DO_DISASSOC = 0x00,
REASSOC_DONOT_DISASSOC = 0x01
} WMI_REASSOC_MODE;
typedef PREPACK struct {
A_UINT8 mode;
}POSTPACK WMI_SET_REASSOC_MODE_CMD;
typedef enum {
ROAM_DATA_TIME = 1, /* Get The Roam Time Data */
} ROAM_DATA_TYPE;
typedef PREPACK struct {
A_UINT32 disassoc_time;
A_UINT32 no_txrx_time;
A_UINT32 assoc_time;
A_UINT32 allow_txrx_time;
A_UINT8 disassoc_bssid[ATH_MAC_LEN];
A_INT8 disassoc_bss_rssi;
A_UINT8 assoc_bssid[ATH_MAC_LEN];
A_INT8 assoc_bss_rssi;
} POSTPACK WMI_TARGET_ROAM_TIME;
typedef PREPACK struct {
PREPACK union {
WMI_TARGET_ROAM_TIME roamTime;
} POSTPACK u;
A_UINT8 roamDataType ;
} POSTPACK WMI_TARGET_ROAM_DATA;
typedef enum {
WMI_WMM_DISABLED = 0,
WMI_WMM_ENABLED
} WMI_WMM_STATUS;
typedef PREPACK struct {
A_UINT8 status;
}POSTPACK WMI_SET_WMM_CMD;
typedef PREPACK struct {
A_UINT8 status;
}POSTPACK WMI_SET_QOS_SUPP_CMD;
typedef enum {
WMI_TXOP_DISABLED = 0,
WMI_TXOP_ENABLED
} WMI_TXOP_CFG;
typedef PREPACK struct {
A_UINT8 txopEnable;
}POSTPACK WMI_SET_WMM_TXOP_CMD;
typedef PREPACK struct {
A_UINT8 keepaliveInterval;
} POSTPACK WMI_SET_KEEPALIVE_CMD;
typedef PREPACK struct {
A_UINT8 keepaliveInterval;
A_UINT8 keepaliveMode;
A_UINT8 reserved[2];
A_UINT32 keepalive_arp_srcip;
A_UINT32 keepalive_arp_tgtip;
A_UINT8 peer_mac_address[6];
} POSTPACK WMI_SET_KEEPALIVE_CMD_EXT;
typedef PREPACK struct {
A_BOOL configured;
A_UINT8 keepaliveInterval;
} POSTPACK WMI_GET_KEEPALIVE_CMD;
/*
* Add Application specified IE to a management frame
*/
#define WMI_MAX_IE_LEN 255
typedef PREPACK struct {
A_UINT8 mgmtFrmType; /* one of WMI_MGMT_FRAME_TYPE */
A_UINT8 ieLen; /* Length of the IE that should be added to the MGMT frame */
A_UINT8 ieInfo[1];
} POSTPACK WMI_SET_APPIE_CMD;
/*
* Notify the WSC registration status to the target
*/
#define WSC_REG_ACTIVE 1
#define WSC_REG_INACTIVE 0
/* Generic Hal Interface for setting hal paramters. */
/* Add new Set HAL Param cmdIds here for newer params */
typedef enum {
WHAL_SETCABTO_CMDID = 1,
}WHAL_CMDID;
typedef PREPACK struct {
A_UINT8 cabTimeOut;
} POSTPACK WHAL_SETCABTO_PARAM;
typedef PREPACK struct {
A_UINT8 whalCmdId;
A_UINT8 data[1];
} POSTPACK WHAL_PARAMCMD;
#define WOW_MAX_FILTER_LISTS 1 /*4*/
#define WOW_MAX_FILTERS_PER_LIST 4
#define WOW_PATTERN_SIZE 64
#define WOW_MASK_SIZE 64
#define MAC_MAX_FILTERS_PER_LIST 7
typedef PREPACK struct {
A_UINT8 wow_valid_filter;
A_UINT8 wow_filter_id;
A_UINT8 wow_filter_size;
A_UINT8 wow_filter_offset;
A_UINT8 wow_filter_mask[WOW_MASK_SIZE];
A_UINT8 wow_filter_pattern[WOW_PATTERN_SIZE];
} POSTPACK WOW_FILTER;
typedef PREPACK struct {
A_UINT8 wow_valid_list;
A_UINT8 wow_list_id;
A_UINT8 wow_num_filters;
A_UINT8 wow_total_list_size;
WOW_FILTER list[WOW_MAX_FILTERS_PER_LIST];
} POSTPACK WOW_FILTER_LIST;
typedef PREPACK struct {
A_UINT8 valid_filter;
A_UINT8 mac_addr[ATH_MAC_LEN];
} POSTPACK MAC_FILTER;
typedef PREPACK struct {
A_UINT8 total_list_size;
A_UINT8 enable;
MAC_FILTER list[MAC_MAX_FILTERS_PER_LIST];
} POSTPACK MAC_FILTER_LIST;
#define MAX_IP_ADDRS 2
typedef PREPACK struct {
A_UINT32 ips[MAX_IP_ADDRS]; /* IP in Network Byte Order */
} POSTPACK WMI_SET_IP_CMD;
typedef PREPACK struct {
A_BOOL awake;
A_BOOL asleep;
} POSTPACK WMI_SET_HOST_SLEEP_MODE_CMD;
typedef A_UINT32 WMI_WOW_FILTER;
/* bit positions for filter options */
#define WOW_FILTER_UNUSED 0
#define WOW_FILTER_SSID 1 /* wake up on probed SSID (legacy definition) */
/* the following filter options are available if the WOW extensions are installed in the target
* otherwise the feature setting has no effect */
#define WOW_FILTER_OPTION_MASK(option) (1 << (option))
#define WOW_FILTER_OPTION_MAGIC_PACKET WOW_FILTER_OPTION_MASK(2)
#define WOW_FILTER_OPTION_EAP_REQ WOW_FILTER_OPTION_MASK(3)
#define WOW_FILTER_OPTION_PATTERNS WOW_FILTER_OPTION_MASK(4)
#define WOW_FILTER_OPTION_OFFLOAD_ARP WOW_FILTER_OPTION_MASK(5)
#define WOW_FILTER_OPTION_OFFLOAD_NS WOW_FILTER_OPTION_MASK(6)
#define WOW_FILTER_OPTION_OFFLOAD_GTK WOW_FILTER_OPTION_MASK(7)
#define WOW_FILTER_OPTION_8021X_4WAYHS WOW_FILTER_OPTION_MASK(8)
#define WOW_FILTER_OPTION_NLO_DISCVRY WOW_FILTER_OPTION_MASK(9)
#define WOW_FILTER_OPTION_NWK_DISASSOC WOW_FILTER_OPTION_MASK(10)
#define WOW_FILTER_OPTION_GTK_ERROR WOW_FILTER_OPTION_MASK(11)
#define WOW_FILTER_OPTION_TEST_MODE WOW_FILTER_OPTION_MASK(15)
typedef PREPACK struct {
A_BOOL enable_wow;
WMI_WOW_FILTER filter;
A_UINT16 hostReqDelay;
} POSTPACK WMI_SET_WOW_MODE_CMD;
typedef PREPACK struct {
A_UINT8 filter_list_id;
} POSTPACK WMI_GET_WOW_LIST_CMD;
/*
* WMI_GET_WOW_LIST_CMD reply
*/
typedef PREPACK struct {
A_UINT8 num_filters; /* number of patterns in reply */
A_UINT8 this_filter_num; /* this is filter # x of total num_filters */
A_UINT8 wow_mode;
A_UINT8 host_mode;
WOW_FILTER wow_filters[1];
} POSTPACK WMI_GET_WOW_LIST_REPLY;
typedef PREPACK struct {
A_UINT8 filter_list_id;
A_UINT8 filter_size;
A_UINT8 filter_offset;
A_UINT8 filter[1];
} POSTPACK WMI_ADD_WOW_PATTERN_CMD;
typedef PREPACK struct {
A_UINT16 filter_list_id;
A_UINT16 filter_id;
} POSTPACK WMI_DEL_WOW_PATTERN_CMD;
typedef PREPACK struct {
A_UINT8 macaddr[ATH_MAC_LEN];
} POSTPACK WMI_SET_MAC_ADDRESS_CMD;
/* WMI_SET_TXE_NOTIFY_CMDID */
typedef PREPACK struct {
A_UINT32 rate;
A_UINT32 pkts;
A_UINT32 intvl;
} POSTPACK WMI_SET_TXE_NOTIFY_CMD;
/*
* WMI_SET_AKMP_PARAMS_CMD
*/
#define WMI_AKMP_MULTI_PMKID_EN 0x000001
typedef PREPACK struct {
A_UINT32 akmpInfo;
} POSTPACK WMI_SET_AKMP_PARAMS_CMD;
typedef PREPACK struct {
A_UINT8 pmkid[WMI_PMKID_LEN];
} POSTPACK WMI_PMKID;
/*
* WMI_SET_PMKID_LIST_CMD
*/
#define WMI_MAX_PMKID_CACHE 8
typedef PREPACK struct {
A_UINT32 numPMKID;
WMI_PMKID pmkidList[WMI_MAX_PMKID_CACHE];
} POSTPACK WMI_SET_PMKID_LIST_CMD;
/*
* WMI_GET_PMKID_LIST_CMD Reply
* Following the Number of PMKIDs is the list of PMKIDs
*/
typedef PREPACK struct {
A_UINT32 numPMKID;
A_UINT8 bssidList[ATH_MAC_LEN][1];
WMI_PMKID pmkidList[1];
} POSTPACK WMI_PMKID_LIST_REPLY;
typedef PREPACK struct {
A_UINT16 oldChannel;
A_UINT32 newChannel;
} POSTPACK WMI_CHANNEL_CHANGE_EVENT;
typedef PREPACK struct {
A_UINT32 version;
} POSTPACK WMI_WLAN_VERSION_EVENT;
/* WMI_ADDBA_REQ_EVENTID */
typedef PREPACK struct {
A_UINT8 tid;
A_UINT8 win_sz;
A_UINT16 st_seq_no;
A_UINT8 status; /* f/w response for ADDBA Req; OK(0) or failure(!=0) */
} POSTPACK WMI_ADDBA_REQ_EVENT;
/* WMI_ADDBA_RESP_EVENTID */
typedef PREPACK struct {
A_UINT8 tid;
A_UINT8 status; /* OK(0), failure (!=0) */
A_UINT16 amsdu_sz; /* Three values: Not supported(0), 3839, 8k */
} POSTPACK WMI_ADDBA_RESP_EVENT;
/* WMI_DELBA_EVENTID
* f/w received a DELBA for peer and processed it.
* Host is notified of this
*/
typedef PREPACK struct {
A_UINT8 tid;
A_UINT8 is_peer_initiator;
A_UINT16 reason_code;
} POSTPACK WMI_DELBA_EVENT;
#ifdef WAPI_ENABLE
#define WAPI_REKEY_UCAST 1
#define WAPI_REKEY_MCAST 2
typedef PREPACK struct {
A_UINT8 type;
A_UINT8 macAddr[ATH_MAC_LEN];
} POSTPACK WMI_WAPIREKEY_EVENT;
#endif
/* WMI_ALLOW_AGGR_CMDID
* Configures tid's to allow ADDBA negotiations
* on each tid, in each direction
*/
typedef PREPACK struct {
A_UINT16 tx_allow_aggr; /* 16-bit mask to allow uplink ADDBA negotiation - bit position indicates tid*/
A_UINT16 rx_allow_aggr; /* 16-bit mask to allow donwlink ADDBA negotiation - bit position indicates tid*/
} POSTPACK WMI_ALLOW_AGGR_CMD;
/* WMI_ADDBA_REQ_CMDID
* f/w starts performing ADDBA negotiations with peer
* on the given tid
*/
typedef PREPACK struct {
A_UINT8 tid;
} POSTPACK WMI_ADDBA_REQ_CMD;
/* WMI_DELBA_REQ_CMDID
* f/w would teardown BA with peer.
* is_send_initiator indicates if it's or tx or rx side
*/
typedef PREPACK struct {
A_UINT8 tid;
A_UINT8 is_sender_initiator;
} POSTPACK WMI_DELBA_REQ_CMD;
#define PEER_NODE_JOIN_EVENT 0x00
#define PEER_NODE_LEAVE_EVENT 0x01
#define PEER_FIRST_NODE_JOIN_EVENT 0x10
#define PEER_LAST_NODE_LEAVE_EVENT 0x11
typedef PREPACK struct {
A_UINT8 eventCode;
A_UINT8 peerMacAddr[ATH_MAC_LEN];
} POSTPACK WMI_PEER_NODE_EVENT;
#define IEEE80211_FRAME_TYPE_MGT 0x00
#define IEEE80211_FRAME_TYPE_CTL 0x04
typedef PREPACK struct {
A_UINT32 rules; /* combination of WMI_WRT_... values */
} POSTPACK WMI_CONFIG_TX_MAC_RULES_CMD;
typedef PREPACK struct {
A_UINT8 enable; /* 1 == device operates in promiscuous mode , 0 == normal mode <default> */
} POSTPACK WMI_SET_PROMISCUOUS_MODE_CMD;
/*RFKILL Related Data Structures*/
typedef enum {
RADIO_STATE_OFF = 0x1,
RADIO_STATE_ON = 0x2,
RADIO_STATE_INVALID = 0xFF
}RFKILL_RADIO_STATE;
typedef PREPACK struct {
A_UINT8 GPIOPinNumber;
A_UINT8 IntrType;
A_UINT8 RadioState;
} POSTPACK WMI_RFKILL_MODE_CMD;
typedef PREPACK struct {
A_UINT32 FastScanInterval;
A_UINT32 FastScanDuration;
A_UINT32 SlowScanInterval;
A_UINT8 ScanType; //ActiveUseSSID=0, ActiveUseWildCard=1, PassiveScan=2
A_UINT8 bStartNetworkListOffload; //TRUE - Use the Probed SSID
}POSTPACK WMI_NETWORK_LIST_OFFLOAD_CMD;
typedef PREPACK struct {
A_UINT8 bProfileMatch;
A_UINT8 Index;
A_UINT32 nFastScansRemaining;
}POSTPACK WMI_NETWORK_LIST_OFFLOAD_INFO;
typedef PREPACK struct _WMI_IPV6_ADDR {
A_UINT8 address[16]; /* IPV6 in Network Byte Order */
} POSTPACK WMI_IPV6_ADDR;
#define WMI_MAX_NS_OFFLOADS 2
#define WMI_MAX_ARP_OFFLOADS 2
#define WMI_ARPOFF_FLAGS_VALID (1 << 0) /* the tuple entry is valid */
#define WMI_ARPOFF_FLAGS_MAC_VALID (1 << 1) /* the target mac address is valid */
#define WMI_ARPOFF_FLAGS_REMOTE_IP_VALID (1 << 2) /* remote IP field is valid */
typedef PREPACK struct {
A_UINT8 flags; /* flags */
A_UINT8 target_ipaddr[4]; /* IPV4 addresses of the local node*/
A_UINT8 remote_ipaddr[4]; /* source address of the remote node requesting the ARP (qualifier) */
A_UINT8 target_mac[ATH_MAC_LEN]; /* mac address for this tuple, if not valid, the local MAC is used */
} POSTPACK WMI_ARP_OFFLOAD_TUPLE;
#define WMI_NSOFF_FLAGS_VALID (1 << 0) /* the tuple entry is valid */
#define WMI_NSOFF_FLAGS_MAC_VALID (1 << 1) /* the target mac address is valid */
#define WMI_NSOFF_FLAGS_REMOTE_IP_VALID (1 << 2) /* remote IP field is valid */
#define WMI_NSOFF_MAX_TARGET_IPS 2
typedef PREPACK struct {
A_UINT8 flags; /* flags */
WMI_IPV6_ADDR target_ipaddr[WMI_NSOFF_MAX_TARGET_IPS]; /* IPV6 target addresses of the local node */
WMI_IPV6_ADDR solicitation_ipaddr; /* multi-cast source IP addresses for receiving solicitations */
WMI_IPV6_ADDR remote_ipaddr; /* address of remote node requesting the solicitation (qualifier) */
A_UINT8 target_mac[ATH_MAC_LEN]; /* mac address for this tuple, if not valid, the local MAC is used */
} POSTPACK WMI_NS_OFFLOAD_TUPLE;
typedef PREPACK struct {
A_UINT32 flags;
WMI_NS_OFFLOAD_TUPLE ns_tuples[WMI_MAX_NS_OFFLOADS];
WMI_ARP_OFFLOAD_TUPLE arp_tuples[WMI_MAX_ARP_OFFLOADS];
} POSTPACK WMI_SET_ARP_NS_OFFLOAD_CMD;
typedef PREPACK struct {
A_UINT8 filter_list_id;
A_UINT8 filter_id;
A_UINT16 filter_size;
A_UINT8 filter_offset;
A_UINT8 filter[1];
} POSTPACK WMI_ADD_WOW_EXT_PATTERN_CMD;
/* WOW extension for larger filter patterns, note these settings are only
* valid if the WOW extension is installed in the target
* When using the WOW extensions, the use of WMI_GET_WOW_LIST_REPLY will return an empty
* WOW_FILTER structure. In WOW extended mode, the host is expected to track what filters
* are installed in the target. */
#define WOW_EXT_DEF_FILTER_LISTS 1
#define WOW_EXT_DEF_FILTERS_PER_LIST 16
#define WOW_EXT_DEF_PATTERN_SIZE 136 /* typical pattern size (128 byte DIX + SNAPLLC) */
#define WOW_EXT_FILTER_ID_CLEAR_ALL 0xFFFF /* use this ID in WMI_DEL_WOW_PATTERN, to clear all patterns */
#define WOW_EXT_MAX_PATTERN_LEN_SIZE 2040 /* absolute max limit on pattern */
/* compute mask size based on pattern size */
#define WOW_EXT_COMPUTE_MASK_SIZE(msize,psize) \
{ \
*(msize) = ((A_UINT32)psize)/8; \
if (((A_UINT32)psize) % 8) {(*(msize))++;} \
}
/* variable length event providing wake event information. Wake events can be
* the result of wake-packets, network events or other miscellaneous wake causes.
*
* NOTE: a WMI data header flag is not sufficient to use as WMI also forwards
* A-MSDU aggregates. The wake event indicates which frame caused the wake which could
* be embedded in an A-MSDU frame */
typedef enum {
WOW_EXT_WAKE_TYPE_UNDEF = 0,
WOW_EXT_WAKE_TYPE_MAGIC = 1, /* magic, value = N/A, wake_data = copy of wake packet */
WOW_EXT_WAKE_TYPE_PATTERN = 2, /* bitmap pattern, value = filter index, wake_data = copy of wake packet */
WOW_EXT_WAKE_TYPE_EAPREQ = 3, /* eap request value = N/A, wake_data = copy of wake packet */
WOW_EXT_WAKE_TYPE_4WAYHS, /* 802.1X 4-wake handshake request caused wakeup, wake_data - copy of packet */
WOW_EXT_WAKE_TYPE_NETWORK_NLO, /* network list offload match */
WOW_EXT_WAKE_TYPE_NETWORK_DISASSOC, /* network association loss */
WOW_EXT_WAKE_TYPE_NETWORK_GTK_OFFL_ERROR, /* if GTK refresh is enabled, a failure generates a wake event */
WOW_EXT_WAKE_TYPE_MAX
} WOW_EXT_WAKE_TYPE;
typedef PREPACK struct {
A_UINT16 flags; /* flags, currently reserved */
A_UINT8 type; /* type of packet that caused the wake event */
A_UINT8 value; /* optional value depending on type (see above) */
A_UINT16 packet_length; /* if type is a wake packet, then this is the original length */
A_UINT16 wake_data_length; /* copy length of wake packet data to follow */
A_UINT8 wake_data[1]; /* start of wake data*/
} POSTPACK WMI_WOW_EXT_WAKE_EVENT;
#define WMI_WOW_EXT_WAKE_MAX_DATA_LENGTH 128
#define GTK_OFFLOAD_REPLAY_COUNTER_BYTES 8
#define WMI_GTK_OFFLOAD_STATUS_FLAGS_RUNNING (1 << 0) /* GTK offload is running*/
#define GTK_OFFLOAD_KEK_BYTES 16
#define GTK_OFFLOAD_KCK_BYTES 16
#define GTK_REPLAY_COUNTER_BYTES 8
typedef PREPACK struct {
A_UINT32 flags; /* status flags */
A_UINT32 refresh_cnt; /* number of successful GTK refresh exchanges since last SET operation */
A_UINT8 replay_counter[GTK_REPLAY_COUNTER_BYTES]; /* current replay counter */
} POSTPACK WMI_GTK_OFFLOAD_STATUS_EVENT;
#define WMI_GTK_OFFLOAD_OPCODE_SET 1 /* set offload parameters, KEK,KCK and replay counter values are valid */
#define WMI_GTK_OFFLOAD_OPCODE_CLEAR 2 /* clear offload parameters */
#define WMI_GTK_OFFLOAD_OPCODE_STATUS 3 /* get status, generates WMI_GTK_OFFLOAD_STATUS_EVENT */
/* structure to issue GTK offload opcode to set/clear or fetch status
* NOTE: offload is enabled when WOW options are enabled, see WOW_FILTER_OPTION_OFFLOAD_GTK */
typedef PREPACK struct {
A_UINT32 flags; /* control flags */
A_UINT8 opcode; /* opcode */
A_UINT8 KEK[GTK_OFFLOAD_KEK_BYTES]; /* key encryption key */
A_UINT8 KCK[GTK_OFFLOAD_KCK_BYTES]; /* key confirmation key */
A_UINT8 replay_counter[GTK_REPLAY_COUNTER_BYTES]; /* replay counter for re-key */
} POSTPACK WMI_GTK_OFFLOAD_OP;
#define WMI_RX_FILTER_DEFAULT_MAX_TESTS_PER_FILTER 5
#define WMI_RX_FILTER_DEFAULT_MAX_FILTERS 10
/* note the max pattern length was selected to balance size and usefulness. Header
* filtering is sized to support IPV6 addresses (16 octets using 2 entries)
* and MAC addresses (6 octets) */
#define RX_FILTER_FRAME_TEST_MAX_PATTERN_LEN 8
typedef enum {
WMI_RX_FILTER_PACKET_TYPE_NOT_SPEC = 0, /* not specified */
WMI_RX_FILTER_PACKET_TYPE_UNICAST = 1,
WMI_RX_FILTER_PACKET_TYPE_MULTICAST = 2,
WMI_RX_FILTER_PACKET_TYPE_BROADCAST = 3,
WMI_RX_FILTER_PACKET_TYPE_MAX
} WMI_RX_FILTER_PACKET_TYPE;
#define RX_FILTER_FRAME_TEST_FLAGS_EQUALITY (1 << 0) /* equality test, otherwise != */
#define RX_FILTER_FRAME_TEST_FLAGS_MASK (1 << 1) /* mask test */
#define RX_FILTER_FRAME_TEST_FLAGS_TYPE_CHECK (1 << 2) /* this entry is a packet type check place holder */
/* testing a frame requires an offset, equality flag, an ANDing mask array and a check bytes array.
* This provides the flexibity to test a frame for a desired result using the following combinations:
*
* frame[offset] AND mask[] == check[]
* frame[offset] AND mask[] != check[]
* frame[offset] == check[]
* frame[offset] != check[]
*
*/
typedef PREPACK struct {
A_UINT8 flags; /* frame test flags */
union {
A_UINT8 offset; /* relative offset from this layer's header */
A_UINT8 type; /* if flags indicate a type-check, this value is WMI_RX_FILTER_PACKET_TYPE */
} option; /* additional test options depending on flags setting */
A_UINT8 length; /* number of bytes to test */
A_UINT8 rsvd0; /* reserved for target use */
A_UINT8 mask[RX_FILTER_FRAME_TEST_MAX_PATTERN_LEN]; /* AND mask to apply to each frame byte */
A_UINT8 check[RX_FILTER_FRAME_TEST_MAX_PATTERN_LEN]; /* check bytes */
} POSTPACK WMI_RX_FILTER_FRAME_TEST;
typedef PREPACK struct {
A_UINT8 index; /* index for this entry */
A_UINT8 reserved[3]; /* padding and future use */
WMI_RX_FILTER_FRAME_TEST frame_test; /* frame test information for this entry */
} POSTPACK WMI_RX_FILTER_SET_FRAME_TEST;
/* structure for WMI_RX_FILTER_SET_FRAME_TEST_LIST_CMDID */
typedef PREPACK struct {
A_UINT8 num_entries; /* number of entries to follow */
A_UINT8 reserved[3]; /* padding and future use */
WMI_RX_FILTER_SET_FRAME_TEST frame_test_entries[1]; /* start of frame test entries */
} POSTPACK WMI_RX_FILTER_SET_FRAME_TEST_LIST;
typedef enum {
WMI_RX_FILTER_FRAME_HDR_TEST_MAC = 0, /* testing MAC fields */
WMI_RX_FILTER_FRAME_HDR_TEST_SNAP = 1, /* testing SNAP fields */
WMI_RX_FILTER_FRAME_HDR_TEST_ARP = 2, /* testing ARP fields */
WMI_RX_FILTER_FRAME_HDR_TEST_GEN_ETHPROTO, /* testing a generic pattern in ether payload */
WMI_RX_FILTER_FRAME_HDR_TEST_IPV4, /* testing IPV4 fields */
WMI_RX_FILTER_FRAME_HDR_TEST_IPV6, /* testing IPV6 fields */
WMI_RX_FILTER_FRAME_HDR_TEST_GEN_IPPROTO, /* testing a generic pattern in IP payload */
WMI_RX_FILTER_FRAME_HDR_TEST_UDP, /* testing UDP fields */
WMI_RX_FILTER_FRAME_HDR_TEST_MAX
} WMI_RX_FILTER_FRAME_HDR_TEST_TYPE;
#define MAKE_RX_FILTER_FRAME_HDR_MASK(b) (1 << (b))
#define WMI_RX_FILT_FRAME_HDR_TEST_MAC \
MAKE_RX_FILTER_FRAME_HDR_MASK(WMI_RX_FILTER_FRAME_HDR_TEST_MAC)
#define WMI_RX_FILT_FRAME_HDR_TEST_SNAP \
MAKE_RX_FILTER_FRAME_HDR_MASK(WMI_RX_FILTER_FRAME_HDR_TEST_SNAP)
#define WMI_RX_FILT_FRAME_HDR_TEST_ARP \
MAKE_RX_FILTER_FRAME_HDR_MASK(WMI_RX_FILTER_FRAME_HDR_TEST_ARP)
#define WMI_RX_FILT_FRAME_HDR_TEST_IPV4 \
MAKE_RX_FILTER_FRAME_HDR_MASK(WMI_RX_FILTER_FRAME_HDR_TEST_IPV4)
#define WMI_RX_FILT_FRAME_HDR_TEST_IPV6 \
MAKE_RX_FILTER_FRAME_HDR_MASK(WMI_RX_FILTER_FRAME_HDR_TEST_IPV6)
#define WMI_RX_FILT_FRAME_HDR_TEST_UDP \
MAKE_RX_FILTER_FRAME_HDR_MASK(WMI_RX_FILTER_FRAME_HDR_TEST_UDP)
typedef PREPACK struct {
A_UINT8 type; /* header test type (see WMI_RX_FILTER_FRAME_HDR_TEST_TYPE) */
A_UINT8 frame_test_index; /* corresponding frame test */
A_UINT8 reserved[2]; /* padding and future use */
} POSTPACK WMI_RX_FILTER_SET_HDR_TEST;
typedef enum {
WMI_RX_COALESCE_FILTER_OP_UNDEF = 0,
WMI_RX_COALESCE_FILTER_OP_SET = 1,
WMI_RX_COALESCE_FILTER_OP_CLEAR = 2,
WMI_RX_COALESCE_FILTER_OP_MAX,
} WMI_RX_COALESCE_FILTER_OPCODE;
typedef PREPACK struct {
A_UINT8 op_code; /* op code */
A_UINT8 index; /* filter index */
A_UINT8 reserved[2]; /* padding and future use */
union {
/* parameters for SET opcode */
struct {
A_UINT32 coalesc_delay_ms; /* coalesc delay in milliseconds */
A_UINT8 total_hdr_tests; /* number of hdr test elements to follow */
A_UINT8 reserved[3]; /* padding and future use */
} set_filter_params;
} params;
union {
/* data for SET opcode */
WMI_RX_FILTER_SET_HDR_TEST header_tests[1]; /* one or more entries */
} data;
} POSTPACK WMI_RX_FILTER_COALESCE_FILTER_OP;
/*
* Transmit complete event data structure(s)
*/
typedef PREPACK struct {
#define TX_COMPLETE_STATUS_SUCCESS 0
#define TX_COMPLETE_STATUS_RETRIES 1
#define TX_COMPLETE_STATUS_NOLINK 2
#define TX_COMPLETE_STATUS_TIMEOUT 3
#define TX_COMPLETE_STATUS_OTHER 4
A_UINT8 status; /* one of TX_COMPLETE_STATUS_... */
A_UINT8 pktID; /* packet ID to identify parent packet */
A_UINT8 rateIdx; /* rate index on successful transmission */
A_UINT8 ackFailures; /* number of ACK failures in tx attempt */
#if 0 /* optional params currently ommitted. */
A_UINT32 queueDelay; // usec delay measured Tx Start time - host delivery time
A_UINT32 mediaDelay; // usec delay measured ACK rx time - host delivery time
#endif
} POSTPACK TX_COMPLETE_MSG_V1; /* version 1 of tx complete msg */
#if defined(EXTENDED_TX_COMPLETE)
typedef PREPACK struct {
#define TX_COMPLETE_TYPE_UCAST 0
#define TX_COMPLETE_TYPE_MGMT 1
#define TX_COMPLETE_TYPE_MCAST 2
#define TX_COMPLETE_TYPE_PAL 3
A_UINT8 status : 4, /* one of TX_COMPLETE_STATUS_... */
dev_id : 4;
A_UINT8 peer_id;
A_UINT8 tid : 4,
pkt_type : 4; /* 0:unicast data, 1:mgmt&ctrl, 2:multicast data, 3:pal */
A_UINT8 packet_id;
} POSTPACK TX_COMPLETE_MSG_V2; /* version 1 of tx complete msg */
#endif /* EXTENDED_TX_COMPLETE */
typedef PREPACK struct {
A_UINT8 numMessages; /* number of tx comp msgs following this struct */
A_UINT8 msgLen; /* length in bytes for each individual msg following this struct */
A_UINT8 msgType; /* version of tx complete msg data following this struct */
A_UINT8 reserved; /* individual messages follow this header */
} POSTPACK WMI_TX_COMPLETE_EVENT;
#define WMI_TXCOMPLETE_VERSION_1 (0x01)
#if defined(EXTENDED_TX_COMPLETE)
#define WMI_TXCOMPLETE_VERSION_2 (0x02)
#endif /* EXTENDED_TX_COMPLETE */
/*
* ------- AP Mode definitions --------------
*/
/*
* !!! Warning !!!
* -Changing the following values needs compilation of both driver and firmware
*/
#ifdef AR6002_REV2
#define AP_MAX_NUM_STA 4
#else
#define AP_MAX_NUM_STA 10
#endif
/*Maximum no. of virtual interface supported*/
#ifdef AR6002_REV64
#define NUM_DEV 4
#define NUM_CONN (AP_MAX_NUM_STA + NUM_DEV - 1) /* As P2P device port won't enter CONN state, so we omit 1 CONN buffer */
#else
#define NUM_DEV 3
#define NUM_CONN (AP_MAX_NUM_STA + NUM_DEV)
#endif
#define AP_ACL_SIZE 10
#define IEEE80211_MAX_IE 256
#define MCAST_AID 0xFF /* Spl. AID used to set DTIM flag in the beacons */
#define DEF_AP_COUNTRY_CODE "US "
#define DEF_AP_WMODE_G WMI_11G_MODE
#define DEF_AP_WMODE_AG WMI_11AG_MODE
#define DEF_AP_DTIM 5
#define DEF_BEACON_INTERVAL 100
/* ACS scan policy */
#define AP_ACS_NORMAL 0 /* 1, 6, 11 */
#define AP_ACS_DISABLE_CH11 1 /* 1, 6 */
#define AP_ACS_INCLUDE_CH13 2 /* 1, 5, 9, 13 */
/* AP mode disconnect reasons */
#define AP_DISCONNECT_STA_LEFT 101
#define AP_DISCONNECT_FROM_HOST 102
#define AP_DISCONNECT_COMM_TIMEOUT 103
#define AP_DISCONNECT_MAX_STA 104
#define AP_DISCONNECT_ACL 105
#define AP_DISCONNECT_STA_ROAM 106
#define AP_DISCONNECT_DFS_CHANNEL 107
/*
* Used with WMI_AP_HIDDEN_SSID_CMDID
*/
#define HIDDEN_SSID_FALSE 0
#define HIDDEN_SSID_TRUE 1
typedef PREPACK struct {
A_UINT8 hidden_ssid;
} POSTPACK WMI_AP_HIDDEN_SSID_CMD;
/*
* Used with WMI_AP_ACL_POLICY_CMDID
*/
#define AP_ACL_DISABLE 0x00
#define AP_ACL_ALLOW_MAC 0x01
#define AP_ACL_DENY_MAC 0x02
#define AP_ACL_BLWL_MAC 0x03
#define AP_ACL_RETAIN_LIST_MASK 0x80
typedef PREPACK struct {
A_UINT8 policy;
} POSTPACK WMI_AP_ACL_POLICY_CMD;
/*
* Used with WMI_AP_ACL_MAC_LIST_CMDID
*/
#define ADD_MAC_ADDR 1
#define DEL_MAC_ADDR 2
#define ADD_WHITE_MAC_ADDR 0x01
#define ADD_BLACK_MAC_ADDR 0x02
#define RESET_WHITE_LIST 0x03
#define RESET_BLACK_LIST 0x04
#define RESET_BWLIST 0x10
typedef PREPACK struct {
A_UINT8 action;
A_UINT8 index;
A_UINT8 mac[ATH_MAC_LEN];
A_UINT8 wildcard;
} POSTPACK WMI_AP_ACL_MAC_CMD;
typedef PREPACK struct {
A_UINT16 index;
A_UINT8 acl_mac[AP_ACL_SIZE][ATH_MAC_LEN];
A_UINT8 wildcard[AP_ACL_SIZE];
A_UINT8 policy;
} POSTPACK WMI_AP_ACL;
/*
* Used with WMI_AP_SET_NUM_STA_CMDID
*/
typedef PREPACK struct {
A_UINT8 num_sta;
} POSTPACK WMI_AP_NUM_STA_CMD;
/*
* Used with WMI_AP_SET_MLME_CMDID
*/
typedef PREPACK struct {
A_UINT8 mac[ATH_MAC_LEN];
A_UINT16 reason; /* 802.11 reason code */
A_UINT8 cmd; /* operation to perform */
/* MLME Commands */
#define WMI_AP_MLME_ASSOC 1 /* associate station */
#define WMI_AP_DISASSOC 2 /* disassociate station */
#define WMI_AP_DEAUTH 3 /* deauthenticate station */
#define WMI_AP_MLME_AUTHORIZE 4 /* authorize station */
#define WMI_AP_MLME_UNAUTHORIZE 5 /* unauthorize station */
} POSTPACK WMI_AP_SET_MLME_CMD;
typedef PREPACK struct {
A_UINT32 period;
A_UINT8 num_null_func;
} POSTPACK WMI_AP_CONN_INACT_CMD;
typedef PREPACK struct {
A_UINT32 period_min;
A_UINT32 dwell_ms;
} POSTPACK WMI_AP_PROT_SCAN_TIME_CMD;
typedef struct {
A_BOOL flag;
A_UINT16 rsvd;
A_UINT16 aid;
} WMI_AP_SET_PVB_CMD;
#define WMI_DISABLE_REGULATORY_CODE "FF"
typedef PREPACK struct {
A_UCHAR countryCode[3];
} POSTPACK WMI_AP_SET_COUNTRY_CMD;
typedef PREPACK struct {
A_UINT8 dtim;
} POSTPACK WMI_AP_SET_DTIM_CMD;
typedef PREPACK struct {
A_UINT8 band; /* specifies which band to apply these values */
A_UINT8 enable; /* allows 11n to be disabled on a per band basis */
A_UINT8 chan_width_40M_supported;
A_UINT8 short_GI_20MHz;
A_UINT8 short_GI_40MHz;
A_UINT8 intolerance_40MHz;
A_UINT8 max_ampdu_len_exp;
} POSTPACK WMI_SET_HT_CAP_CMD;
typedef PREPACK struct {
A_UINT8 sta_chan_width;
} POSTPACK WMI_SET_HT_OP_CMD;
typedef PREPACK struct {
A_UINT32 rateMasks[WMI_MODE_MAX*WMI_MAX_RATE_MASK];
} POSTPACK WMI_SET_TX_SELECT_RATES_CMD;
typedef PREPACK struct {
A_UINT32 sgiMask[WMI_MAX_RATE_MASK];
A_UINT8 sgiPERThreshold;
} POSTPACK WMI_SET_TX_SGI_PARAM_CMD;
/* Enable for MCS 7/MCS 15 */
#define DEFAULT_SGI_MASK_L32 0x08080000
#define DEFAULT_SGI_MASK_U32 0x00000808
#define DEFAULT_SGI_PER 10
typedef PREPACK struct {
A_UINT32 rateField[WMI_MAX_RATE_MASK]; /* 1 bit per rate corresponding to index */
#define WMI_RATE_POLICY_ID_MAX 5
A_UINT8 id; /* valid values == 1->WMI_RATE_POLICY_ID_MAX */
A_UINT8 shortTrys;
A_UINT8 longTrys;
A_UINT8 reserved; /* padding */
} POSTPACK WMI_SET_RATE_POLICY_CMD;
typedef PREPACK struct {
A_UINT8 metaVersion; /* version of meta data for rx packets <0 = default> (0-7 = valid) */
A_UINT8 dot11Hdr; /* 1 == leave .11 header intact , 0 == replace .11 header with .3 <default> */
A_UINT8 defragOnHost; /* 1 == defragmentation is performed by host, 0 == performed by target <default> */
A_UINT8 reserved[1]; /* alignment */
} POSTPACK WMI_RX_FRAME_FORMAT_CMD;
typedef PREPACK struct {
A_UINT8 enable; /* 1 == device operates in thin mode , 0 == normal mode <default> */
A_UINT8 reserved[3];
} POSTPACK WMI_SET_THIN_MODE_CMD;
typedef PREPACK struct {
A_UINT16 channel; /* frequency in Mhz */
//A_UINT8 mode; // HT20 or HT40
//A_UINT8 secondary; // if mode == HT40 secondary channel above | below
} POSTPACK WMI_SET_CHANNEL_CMD;
typedef enum {
WMI_SET_CHANNEL_RES_SUCCESS = 0, // device has joined the network
WMI_SET_CHANNEL_RES_FAIL, // device failed for unspecified reason
}WMI_SET_CHANNEL_RESULT;
typedef PREPACK struct {
A_UINT8 result; /* the result of the join cmd. one of WMI_THIN_JOIN_RESULT */
A_UINT8 reserved[3]; /* alignment */
} POSTPACK WMI_SET_CHANNEL_EVENT;
typedef enum {
WMI_FILTERMASK_MGMT=0,
WMI_FILTERMASK_CTRL,
WMI_FILTERMASK_DATA,
WMI_FILTERMASK_MAX
}WMI_FILTERMASK_INDEX;
typedef PREPACK struct {
A_UINT16 filtermask[WMI_FILTERMASK_MAX];
A_UINT16 reserved; /* alignment */
} POSTPACK WMI_RX_FRAME_FILTER_CMD;
/* AP mode events */
/* WMI_PS_POLL_EVENT */
typedef PREPACK struct {
A_UINT16 aid;
} POSTPACK WMI_PSPOLL_EVENT;
typedef PREPACK struct {
A_UINT32 tx_bytes;
A_UINT32 tx_pkts;
A_UINT32 tx_error;
A_UINT32 tx_discard;
A_UINT32 rx_bytes;
A_UINT32 rx_pkts;
A_UINT32 rx_error;
A_UINT32 rx_discard;
A_UINT32 aid;
} POSTPACK WMI_PER_STA_STAT;
#define AP_GET_STATS 0
#define AP_CLEAR_STATS 1
typedef PREPACK struct {
A_UINT32 action;
WMI_PER_STA_STAT sta[AP_MAX_NUM_STA];
} POSTPACK WMI_AP_MODE_STAT;
#define AP_11BG_RATESET1 1
#define AP_11BG_RATESET2 2
#define DEF_AP_11BG_RATESET AP_11BG_RATESET1
typedef PREPACK struct {
A_UINT8 rateset;
} POSTPACK WMI_AP_SET_11BG_RATESET_CMD;
/*
* End of AP mode definitions
*/
struct _wmm_params {
A_UINT8 acm; /* ACM parameter */
A_UINT8 aifsn; /* AIFSN parameters */
A_UINT8 logcwmin; /* cwmin in exponential form */
A_UINT8 logcwmax; /* cwmax in exponential form */
A_UINT16 txopLimit; /* txopLimit */
};
/* WMI_REPORT_WMM_PARAMS_EVENT */
typedef PREPACK struct {
struct _wmm_params wmm_params[4];
} POSTPACK WMI_REPORT_WMM_PARAMS_EVENT;
/* P2P module definitions */
/* P2P module commands */
typedef PREPACK struct {
A_UINT8 go_intent;
A_UINT8 country[3];
A_UINT8 reg_class;
A_UINT8 listen_channel;
A_UINT8 op_reg_class;
A_UINT8 op_channel;
} POSTPACK WMI_P2P_SET_CONFIG_CMD;
typedef PREPACK struct {
A_UINT16 categ;
A_UINT16 sub_categ;
} POSTPACK device_type_tuple;
typedef PREPACK struct {
device_type_tuple pri_dev_type;
//A_UINT8 pri_device_type[8];
#define MAX_P2P_SEC_DEVICE_TYPES 5
device_type_tuple sec_dev_type[MAX_P2P_SEC_DEVICE_TYPES];
#define WPS_UUID_LEN 16
A_UINT8 uuid[WPS_UUID_LEN];
#define WPS_MAX_DEVNAME_LEN 32
A_UINT8 device_name[WPS_MAX_DEVNAME_LEN];
A_UINT8 dev_name_len;
} POSTPACK WMI_WPS_SET_CONFIG_CMD;
typedef PREPACK struct {
device_type_tuple pri_dev_type;
device_type_tuple sec_dev_type[MAX_P2P_SEC_DEVICE_TYPES];
A_UINT8 device_addr[ATH_MAC_LEN];
} POSTPACK WMI_SET_REQ_DEV_ATTR_CMD;
typedef PREPACK struct {
A_UINT8 ssidLength;
A_UINT8 ssid[WMI_MAX_SSID_LEN];
} POSTPACK P2P_SSID;
typedef enum wmi_p2p_discovery_type {
WMI_P2P_FIND_START_WITH_FULL,
WMI_P2P_FIND_ONLY_SOCIAL,
WMI_P2P_FIND_PROGRESSIVE
} WMI_P2P_DISC_TYPE;
typedef PREPACK struct {
A_UINT32 timeout;
WMI_P2P_DISC_TYPE type;
} POSTPACK WMI_P2P_FIND_CMD;
typedef PREPACK struct {
A_UINT16 listen_freq;
A_UINT16 force_freq;
A_UINT16 go_oper_freq;
A_UINT8 dialog_token;
A_UINT8 peer_addr[ATH_MAC_LEN];
A_UINT8 own_interface_addr[ATH_MAC_LEN];
A_UINT8 member_in_go_dev[ATH_MAC_LEN];
A_UINT8 go_dev_dialog_token;
P2P_SSID peer_go_ssid;
A_UINT8 wps_method;
A_UINT8 dev_capab;
A_INT8 go_intent;
A_UINT8 persistent_grp;
} POSTPACK WMI_P2P_GO_NEG_START_CMD;
typedef PREPACK struct {
A_UINT8 persistent_group;
A_UINT8 group_formation;
} POSTPACK WMI_P2P_GRP_INIT_CMD;
typedef PREPACK struct {
A_UINT8 peer_addr[ATH_MAC_LEN];
A_UINT8 grp_formation_status;
} POSTPACK WMI_P2P_GRP_FORMATION_DONE_CMD;
typedef PREPACK struct {
A_UINT32 timeout;
}POSTPACK WMI_P2P_LISTEN_CMD;
typedef PREPACK struct {
A_UINT16 listen_freq;
A_UINT16 force_freq;
A_UINT8 status;
A_INT8 go_intent;
A_UINT8 wps_buf[512];
A_UINT16 wps_buflen;
A_UINT8 p2p_buf[512];
A_UINT16 p2p_buflen;
A_UINT8 dialog_token;
A_UINT8 wps_method;
A_UINT8 persistent_grp;
}POSTPACK WMI_P2P_GO_NEG_REQ_RSP_CMD;
typedef enum {
WMI_P2P_INVITE_ROLE_GO,
WMI_P2P_INVITE_ROLE_ACTIVE_GO,
WMI_P2P_INVITE_ROLE_CLIENT,
} WMI_P2P_INVITE_ROLE;
typedef PREPACK struct {
WMI_P2P_INVITE_ROLE role;
A_UINT16 listen_freq;
A_UINT16 force_freq;
A_UINT8 dialog_token;
A_UINT8 peer_addr[ATH_MAC_LEN];
A_UINT8 bssid[ATH_MAC_LEN];
A_UINT8 go_dev_addr[ATH_MAC_LEN];
P2P_SSID ssid;
A_UINT8 is_persistent;
A_UINT8 wps_method;
}POSTPACK WMI_P2P_INVITE_CMD;
typedef PREPACK struct {
A_UINT16 force_freq;
A_UINT8 status;
A_UINT8 dialog_token;
A_UINT8 p2p_buf[512];
A_UINT16 p2p_buflen;
A_UINT8 is_go;
A_UINT8 group_bssid[ATH_MAC_LEN];
}POSTPACK WMI_P2P_INVITE_REQ_RSP_CMD;
typedef PREPACK struct {
A_UINT16 wps_method;
A_UINT16 listen_freq;
A_UINT8 dialog_token;
A_UINT8 peer[ATH_MAC_LEN];
A_UINT8 go_dev_addr[ATH_MAC_LEN];
P2P_SSID go_oper_ssid;
}POSTPACK WMI_P2P_PROV_DISC_REQ_CMD;
typedef enum {
WMI_P2P_CONFID_LISTEN_CHANNEL=1,
WMI_P2P_CONFID_CROSS_CONNECT=2,
WMI_P2P_CONFID_SSID_POSTFIX=3,
WMI_P2P_CONFID_INTRA_BSS=4,
} WMI_P2P_CONF_ID;
typedef PREPACK struct {
A_UINT8 reg_class;
A_UINT8 listen_channel;
}POSTPACK WMI_P2P_LISTEN_CHANNEL;
typedef PREPACK struct {
A_UINT8 flag;
}POSTPACK WMI_P2P_SET_CROSS_CONNECT;
typedef PREPACK struct {
A_UINT8 ssid_postfix[WMI_MAX_SSID_LEN-9];
A_UINT8 ssid_postfix_len;
}POSTPACK WMI_P2P_SET_SSID_POSTFIX;
typedef PREPACK struct {
A_UINT8 flag;
}POSTPACK WMI_P2P_SET_INTRA_BSS;
typedef PREPACK struct {
A_UINT8 config_id; /* set to one of WMI_P2P_CONF_ID */
PREPACK union {
WMI_P2P_LISTEN_CHANNEL listen_ch;
WMI_P2P_SET_CROSS_CONNECT cross_conn;
WMI_P2P_SET_SSID_POSTFIX ssid_postfix;
WMI_P2P_SET_INTRA_BSS intra_bss;
}POSTPACK val;
}POSTPACK WMI_P2P_SET_CMD;
#define RATECTRL_MODE_DEFAULT 0
#define RATECTRL_MODE_PERONLY 1
typedef PREPACK struct {
A_UINT32 mode;
}POSTPACK WMI_SET_RATECTRL_PARM_CMD;
#define WMI_P2P_MAX_TLV_LEN 1024
typedef enum {
WMI_P2P_SD_TYPE_GAS_INITIAL_REQ = 0x1,
WMI_P2P_SD_TYPE_GAS_INITIAL_RESP = 0x2,
WMI_P2P_SD_TYPE_GAS_COMEBACK_REQ = 0x3,
WMI_P2P_SD_TYPE_GAS_COMEBACK_RESP = 0x4,
WMI_P2P_PD_TYPE_RESP = 0x5,
WMI_P2P_SD_TYPE_STATUS_IND = 0x6,
} WMI_P2P_SDPD_TYPE;
typedef enum {
WMI_P2P_SDPD_TRANSACTION_PENDING = 0x1,
WMI_P2P_SDPD_TRANSACTION_COMP = 0x2,
} WMI_P2P_SDPD_TRANSACTION_STATUS;
typedef PREPACK struct {
A_UINT8 type;
A_UINT8 dialog_token;
A_UINT8 frag_id;
A_UINT8 reserved1; /* alignment */
A_UINT8 peer_addr[ATH_MAC_LEN];
A_UINT16 freq;
A_UINT16 status_code;
A_UINT16 comeback_delay;
A_UINT16 tlv_length;
A_UINT16 update_indic;
A_UINT16 total_length;
A_UINT16 reserved2; /* future */
A_UINT8 tlv[WMI_P2P_MAX_TLV_LEN];
} POSTPACK WMI_P2P_SDPD_TX_CMD;
/* P2P module events */
typedef PREPACK struct {
A_UINT8 sa[ATH_MAC_LEN];
A_UINT8 wps_buf[512];
A_UINT16 wps_buflen;
A_UINT8 p2p_buf[512];
A_UINT16 p2p_buflen;
A_UINT8 dialog_token;
}POSTPACK WMI_P2P_GO_NEG_REQ_EVENT;
typedef PREPACK struct {
A_UINT16 freq;
A_INT8 status;
A_UINT8 role_go;
A_UINT8 ssid[WMI_MAX_SSID_LEN];
A_UINT8 ssid_len;
#define WMI_MAX_PASSPHRASE_LEN 9
A_CHAR pass_phrase[WMI_MAX_PASSPHRASE_LEN];
A_UINT8 peer_device_addr[ATH_MAC_LEN];
A_UINT8 peer_interface_addr[ATH_MAC_LEN];
A_UINT8 wps_method;
A_UINT8 persistent_grp;
} POSTPACK WMI_P2P_GO_NEG_RESULT_EVENT;
typedef PREPACK struct {
A_UINT8 p2p_buf[512];
A_UINT16 p2p_buflen;
A_UINT8 sa[ATH_MAC_LEN];
A_UINT8 bssid[ATH_MAC_LEN];
A_UINT8 go_dev_addr[ATH_MAC_LEN];
P2P_SSID ssid;
A_UINT8 is_persistent;
A_UINT8 dialog_token;
} POSTPACK WMI_P2P_INVITE_REQ_EVENT;
typedef PREPACK struct {
A_UINT16 oper_freq;
A_UINT8 sa[ATH_MAC_LEN];
A_UINT8 bssid[ATH_MAC_LEN];
A_UINT8 is_bssid_valid;
A_UINT8 go_dev_addr[ATH_MAC_LEN];
P2P_SSID ssid;
A_UINT8 status;
} POSTPACK WMI_P2P_INVITE_RCVD_RESULT_EVENT;
typedef PREPACK struct {
A_UINT8 status;
A_UINT8 bssid[ATH_MAC_LEN];
A_UINT8 is_bssid_valid;
} POSTPACK WMI_P2P_INVITE_SENT_RESULT_EVENT;
typedef PREPACK struct {
A_UINT8 sa[ATH_MAC_LEN];
A_UINT16 wps_config_method;
A_UINT8 dev_addr[ATH_MAC_LEN];
#define WPS_DEV_TYPE_LEN 8
A_UINT8 pri_dev_type[WPS_DEV_TYPE_LEN];
A_UINT8 device_name[WPS_MAX_DEVNAME_LEN];
A_UINT8 dev_name_len;
A_UINT16 dev_config_methods;
A_UINT8 device_capab;
A_UINT8 group_capab;
} POSTPACK WMI_P2P_PROV_DISC_REQ_EVENT;
typedef PREPACK struct {
A_UINT8 peer[ATH_MAC_LEN];
A_UINT16 config_methods;
} POSTPACK WMI_P2P_PROV_DISC_RESP_EVENT;
typedef PREPACK struct {
A_UINT8 type;
A_UINT8 transaction_status;
A_UINT8 dialog_token;
A_UINT8 frag_id;
A_UINT8 peer_addr[ATH_MAC_LEN];
A_UINT16 freq;
A_UINT16 status_code;
A_UINT16 comeback_delay;
A_UINT16 tlv_length;
A_UINT16 update_indic;
// Variable length TLV will be placed after the event
} POSTPACK WMI_P2P_SDPD_RX_EVENT;
typedef PREPACK struct {
A_UINT8 event_id; /* event identifier */
A_UINT8 length; /* number of bytes of data that follows */
A_UINT8 data[1]; /* start of event data */
} POSTPACK WMI_ACS_EVENT_MSG;
#define WMI_ACS_EVENT_HDR_LEN (sizeof(WMI_ACS_EVENT_MSG) - sizeof(A_UINT8))
typedef PREPACK struct {
A_UINT8 ctrl_id; /* control identifier */
A_UINT8 length; /* number of bytes of data to follow */
A_UINT8 data[1]; /* start of control data */
} POSTPACK WMI_ACS_CTRL_MSG;
#define WMI_ACS_CTRL_HDR_LEN (sizeof(WMI_ACS_CTRL_MSG) - sizeof(A_UINT8))
/* STORE / RECALL Commands AND Events DEFINITION START */
typedef PREPACK struct {
A_UINT8 enable;
#define STRRCL_RECIPIENT_HOST 1
#define STRRCL_RECIPIENT_POWERSAFE_MEM 2
A_UINT8 recipient;
} POSTPACK WMI_STORERECALL_CONFIGURE_CMD;
typedef PREPACK struct {
A_UINT32 length; /* number of bytes of data to follow */
A_UINT8 data[1]; /* start of data */
} POSTPACK WMI_STORERECALL_RECALL_CMD;
typedef PREPACK struct {
A_UINT32 sleep_msec;
A_UINT8 store_after_tx_empty;
A_UINT8 store_after_fresh_beacon_rx;
} POSTPACK WMI_STORERECALL_HOST_READY_CMD;
typedef PREPACK struct {
A_UINT32 msec_sleep; /* time between power off/on */
A_UINT32 length; /* length of following data */
A_UINT8 data[1]; /* start of data */
} POSTPACK WMI_STORERECALL_STORE_EVENT;
/* STORE / RECALL Commands AND Events DEFINITION END */
/* WPS Commands AND Events DEFINITION START */
typedef PREPACK struct {
A_UINT8 ssid[WMI_MAX_SSID_LEN];
A_UINT8 macaddress[ATH_MAC_LEN];
A_UINT16 channel;
A_UINT8 ssid_len;
} POSTPACK WPS_SCAN_LIST_ENTRY;
#define WPS_PIN_LEN (8)
typedef PREPACK struct {
A_UINT8 pin[WPS_PIN_LEN+1];
}POSTPACK WPS_PIN;
typedef enum {
WPS_PIN_MODE = 0x1,
WPS_PBC_MODE = 0x2
} WPS_MODE;
typedef enum {
WPS_REGISTRAR_ROLE = 0x1,
WPS_ENROLLEE_ROLE = 0x2
} WPS_OPER_MODE;
typedef enum {
WPS_DO_CONNECT_AFTER_CRED_RECVD = 0x1
} WPS_START_CTRL_FLAG;
typedef PREPACK struct {
WPS_SCAN_LIST_ENTRY ssid_info;
A_UINT8 config_mode; /* WPS_MODE */
WPS_PIN wps_pin;
A_UINT8 timeout; /* in Seconds */
A_UINT8 role; /* WPS_OPER_MOD */
A_UINT8 ctl_flag; /* WPS_START_CTRL_FLAG */
} POSTPACK WMI_WPS_START_CMD;
typedef enum {
WPS_STATUS_SUCCESS = 0x0,
WPS_STATUS_FAILURE = 0x1,
WPS_STATUS_IDLE = 0x2,
WPS_STATUS_IN_PROGRESS = 0x3,
} WPS_STATUS;
typedef PREPACK struct {
A_UINT8 wps_status; /* WPS_STATUS */
A_UINT8 wps_state;
} POSTPACK WMI_WPS_GET_STATUS_EVENT;
typedef enum {
WPS_ERROR_INVALID_START_INFO = 0x1,
WPS_ERROR_MULTIPLE_PBC_SESSIONS,
WPS_ERROR_WALKTIMER_TIMEOUT,
WPS_ERROR_M2D_RCVD,
WPS_ERROR_PWD_AUTH_FAIL
} WPS_ERROR_CODE;
typedef enum {
WPS_AUTH_TYPE_OPEN = 0x0001,
WPS_AUTH_TYPE_WPAPSK = 0x0002,
WPS_AUTH_TYPE_SHARED = 0x0004,
WPS_AUTH_TYPE_WPA = 0x0008,
WPS_AUTH_TYPE_WPA2 = 0x0010,
WPS_AUTH_TYPE_WPA2PSK = 0x0020
} WPS_AUTH_TYPE;
typedef enum {
WPS_ENCR_TYPE_NONE = 0x0001,
WPS_ENCR_TYPE_WEP = 0x0002,
WPS_ENCR_TYPE_TKIP = 0x0004,
WPS_ENCR_TYPE_AES = 0x0008,
} WPS_ENCR_TYPE;
typedef PREPACK struct {
A_UINT16 ap_channel;
A_UINT8 ssid[WMI_MAX_SSID_LEN];
A_UINT8 ssid_len;
A_UINT16 auth_type; /* WPS_AUTH_TYPE */
A_UINT16 encr_type; /* WPS_ENCR_TYPE */
A_UINT8 key_idx;
A_UINT8 key[64];
A_UINT8 key_len;
A_UINT8 mac_addr[ATH_MAC_LEN];
} POSTPACK WPS_CREDENTIAL;
typedef PREPACK struct {
A_UINT8 status; /* WPS_STATUS */
A_UINT8 error_code; /* WPS_ERROR_CODE */
WPS_CREDENTIAL credential;
} POSTPACK WMI_WPS_PROFILE_EVENT;
/* WPS Commands AND Events DEFINITION END */
typedef enum {
WMI_AP_APSD_DISABLED = 0,
WMI_AP_APSD_ENABLED
} WMI_AP_APSD_STATUS;
typedef PREPACK struct {
A_UINT8 enable;
} POSTPACK WMI_AP_SET_APSD_CMD;
typedef enum {
WMI_AP_APSD_NO_DELIVERY_FRAMES_FOR_THIS_TRIGGER = 0x1,
} WMI_AP_APSD_BUFFERED_TRAFFIC_FLAGS;
typedef PREPACK struct {
A_UINT16 aid;
A_UINT16 bitmap;
A_UINT32 flags;
} POSTPACK WMI_AP_APSD_BUFFERED_TRAFFIC_CMD;
typedef PREPACK struct {
A_UINT32 freq;
A_UINT32 duration;
} POSTPACK WMI_REMAIN_ON_CHNL_CMD_STRUCT;
/* WMI_SEND_ACTION_CMD_STRUCT is to be deprecated; WMI_SEND_MGMT_CMD_STRUCT is
* to be used instead. The new command supports P2P mgmt operations using
* station interface
*/
typedef PREPACK struct {
A_UINT32 ID;
A_UINT32 freq;
A_UINT32 wait;
A_UINT16 len;
A_UINT8 data[1];
} POSTPACK WMI_SEND_ACTION_CMD_STRUCT;
typedef PREPACK struct {
A_UINT32 ID;
A_UINT32 freq;
A_UINT32 wait;
A_BOOL no_cck;
A_UINT16 len;
A_UINT8 data[1];
} POSTPACK WMI_SEND_MGMT_CMD_STRUCT;
typedef PREPACK struct {
A_UINT32 ID;
A_UINT8 ACKStatus;
} POSTPACK WMI_TX_STATUS_EVENT_STRUCT;
typedef PREPACK struct {
A_UINT8 enable;
} POSTPACK WMI_PROBE_REQ_REPORT_CMD_STRUCT;
typedef PREPACK struct {
A_UINT8 disable;
} POSTPACK WMI_DISABLE_11B_RATES_CMD_STRUCT;
typedef PREPACK struct {
A_UINT8 RoleID;
A_UINT8 mgmtFrmType;
A_UINT8 ieLen;
A_UINT8 ieInfo[1];
} POSTPACK WMI_SET_APPIE_EXTENDED_CMD_STRUCT;
typedef PREPACK struct {
A_UINT32 freq;
A_UINT32 duration;
} POSTPACK WMI_REMAIN_ON_CHNL_EVENT_STRUCT;
typedef PREPACK struct {
A_UINT32 freq;
A_UINT32 duration;
A_UINT8 status;
} POSTPACK WMI_CANCEL_REMAIN_ON_CHNL_EVENT_STRUCT;
typedef PREPACK struct {
A_UINT32 freq;
A_UINT16 len;
A_UINT8 data[1];
} POSTPACK WMI_RX_ACTION_EVENT_STRUCT;
typedef PREPACK struct {
A_UINT16 len;
A_UINT8 data[1];
} POSTPACK WMI_P2P_CAPABILITIES_EVENT_STRUCT;
typedef PREPACK struct {
A_UINT32 freq;
A_UINT16 len;
A_UINT8 data[1];
} POSTPACK WMI_P2P_RX_PROBE_REQ_EVENT_STRUCT;
#define P2P_FLAG_CAPABILITIES_REQ (0x00000001)
#define P2P_FLAG_MACADDR_REQ (0x00000002)
#define P2P_FLAG_P2P_MODEL_REQ (0x00000004)
typedef PREPACK struct {
A_UINT32 InfoReqFlags;
} POSTPACK WMI_GET_P2P_INFO_STRUCT;
typedef PREPACK struct {
A_UINT32 InfoReqFlags;
A_UINT16 len;
A_UINT8 data[1];
} POSTPACK WMI_P2P_INFO_EVENT_STRUCT;
typedef PREPACK struct {
A_UINT8 GOPowerSave;
} POSTPACK WMI_P2P_CAPABILITIES_STRUCT;
typedef PREPACK struct {
A_UINT8 MACAddr[6];
} POSTPACK WMI_P2P_MACADDR_STRUCT;
#define P2P_HOST_MODEL 1
#define P2P_FW_MODEL 0
typedef PREPACK struct {
A_UINT8 P2PModel;
} POSTPACK WMI_P2P_MODEL_STRUCT;
typedef PREPACK struct {
A_UINT32 freq;
A_UINT8 DestinationAddr[6];
A_UINT16 len;
A_UINT8 data[1];
} POSTPACK WMI_P2P_PROBE_RESPONSE_CMD_STRUCT;
typedef PREPACK struct {
A_UINT32 duration;
A_UINT32 interval;
A_UINT32 start_or_offset;
A_UINT8 count_or_type;
} POSTPACK P2P_NOA_DESCRIPTOR;
typedef PREPACK struct {
A_UINT8 enable;
A_UINT8 count;
A_UINT8 noas[1];
} POSTPACK WMI_NOA_INFO_STRUCT;
typedef PREPACK struct {
A_UINT8 enable;
A_UINT8 ctwin;
} POSTPACK WMI_OPPPS_INFO_STRUCT;
typedef PREPACK struct {
A_UINT8 port_id;
A_UINT8 port_opmode;
A_UINT8 port_subopmode;
} POSTPACK WMI_ADD_PORT_CMD;
typedef PREPACK struct {
A_UINT8 port_id;
} POSTPACK WMI_DEL_PORT_CMD;
typedef PREPACK struct {
A_UINT8 status;
A_UINT8 port_id;
A_UINT8 mac_addr[6];
} POSTPACK WMI_PORT_STATUS_INFO;
typedef PREPACK struct {
A_UINT16 rsn_cap;
} POSTPACK WMI_RSN_CAP_CMD;
typedef PREPACK struct {
A_UINT8 keyIndex;
A_UINT8 keyLength;
A_UINT8 keyRSC[6];/* key replay sequence counter */
A_UINT8 key[WMI_MAX_KEY_LEN];
} POSTPACK WMI_SET_IGTK_CMD;
typedef PREPACK struct {
A_UINT8 min_rx_bundle_frame;
A_UINT8 min_rx_bundle_timeout;
} POSTPACK WMI_SET_BUNDLE_PARAM_CMD;
typedef PREPACK struct {
A_BOOL enable;
A_UINT8 nextProbeCount;
A_UINT8 maxBackOff;
A_UINT8 forceBackOff;
} POSTPACK WMI_GREENTX_PARAMS_CMD;
/* voice detection enable/disable command structure */
typedef PREPACK struct {
A_UINT8 enable;
} POSTPACK WMI_VOICE_DETECTION_ENABLE_CMD;
typedef enum {
RECOVERY_SIM_ASSERT = 0x01,
RECOVERY_SIM_NO_DETECT = 0x02,
RECOVERY_SIM_CTR_EP_FULL= 0x03,
RECOVERY_SIM_EMPTY_POINT= 0x04,
RECOVERY_SIM_STACK_OV = 0x05,
} RECOVERY_SIM_TYPE;
typedef PREPACK struct {
A_UINT8 type; /*0:unused 1: ASSERT, 2: not respond detect command,3: simulate ep-full(),4:empty point,5 stack overflow...*/
A_UINT8 reserved; /*unused now*/
A_UINT16 delay_time_ms; /*0xffff means the simulate will delay for random time (0 ~0xffff ms)*/
}POSTPACK WMI_SET_RECOVERY_TEST_PARAMETER_CMD;
typedef PREPACK struct {
A_UINT8 disable; /*0: enable broadcast, 1: disable broadcast */
} POSTPACK WMI_DISABLE_BCAST_IN_PM_CMD;
typedef PREPACK struct {
A_INT8 rssi_value;
} POSTPACK WMI_SET_RSSI_FILTER_CMD;
#ifndef ATH_TARGET
//#include "athendpack.h"
#endif
#ifdef __cplusplus
}
#endif
#endif /* _WMI_H_ */