blob: 726fa8981113733a75b6ab19e99db4c316029adb [file] [log] [blame]
/*
* Copyright (c) 2010 Broadcom Corporation
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef _BRCM_SDH_H_
#define _BRCM_SDH_H_
#include <linux/skbuff.h>
#define SDIO_FUNC_0 0
#define SDIO_FUNC_1 1
#define SDIO_FUNC_2 2
#define SDIOD_FBR_SIZE 0x100
/* io_en */
#define SDIO_FUNC_ENABLE_1 0x02
#define SDIO_FUNC_ENABLE_2 0x04
/* io_rdys */
#define SDIO_FUNC_READY_1 0x02
#define SDIO_FUNC_READY_2 0x04
/* intr_status */
#define INTR_STATUS_FUNC1 0x2
#define INTR_STATUS_FUNC2 0x4
/* Maximum number of I/O funcs */
#define SDIOD_MAX_IOFUNCS 7
/* as of sdiod rev 0, supports 3 functions */
#define SBSDIO_NUM_FUNCTION 3
/* function 1 miscellaneous registers */
/* sprom command and status */
#define SBSDIO_SPROM_CS 0x10000
/* sprom info register */
#define SBSDIO_SPROM_INFO 0x10001
/* sprom indirect access data byte 0 */
#define SBSDIO_SPROM_DATA_LOW 0x10002
/* sprom indirect access data byte 1 */
#define SBSDIO_SPROM_DATA_HIGH 0x10003
/* sprom indirect access addr byte 0 */
#define SBSDIO_SPROM_ADDR_LOW 0x10004
/* sprom indirect access addr byte 0 */
#define SBSDIO_SPROM_ADDR_HIGH 0x10005
/* xtal_pu (gpio) output */
#define SBSDIO_CHIP_CTRL_DATA 0x10006
/* xtal_pu (gpio) enable */
#define SBSDIO_CHIP_CTRL_EN 0x10007
/* rev < 7, watermark for sdio device */
#define SBSDIO_WATERMARK 0x10008
/* control busy signal generation */
#define SBSDIO_DEVICE_CTL 0x10009
/* SB Address Window Low (b15) */
#define SBSDIO_FUNC1_SBADDRLOW 0x1000A
/* SB Address Window Mid (b23:b16) */
#define SBSDIO_FUNC1_SBADDRMID 0x1000B
/* SB Address Window High (b31:b24) */
#define SBSDIO_FUNC1_SBADDRHIGH 0x1000C
/* Frame Control (frame term/abort) */
#define SBSDIO_FUNC1_FRAMECTRL 0x1000D
/* ChipClockCSR (ALP/HT ctl/status) */
#define SBSDIO_FUNC1_CHIPCLKCSR 0x1000E
/* SdioPullUp (on cmd, d0-d2) */
#define SBSDIO_FUNC1_SDIOPULLUP 0x1000F
/* Write Frame Byte Count Low */
#define SBSDIO_FUNC1_WFRAMEBCLO 0x10019
/* Write Frame Byte Count High */
#define SBSDIO_FUNC1_WFRAMEBCHI 0x1001A
/* Read Frame Byte Count Low */
#define SBSDIO_FUNC1_RFRAMEBCLO 0x1001B
/* Read Frame Byte Count High */
#define SBSDIO_FUNC1_RFRAMEBCHI 0x1001C
#define SBSDIO_FUNC1_MISC_REG_START 0x10000 /* f1 misc register start */
#define SBSDIO_FUNC1_MISC_REG_LIMIT 0x1001C /* f1 misc register end */
/* function 1 OCP space */
/* sb offset addr is <= 15 bits, 32k */
#define SBSDIO_SB_OFT_ADDR_MASK 0x07FFF
#define SBSDIO_SB_OFT_ADDR_LIMIT 0x08000
/* with b15, maps to 32-bit SB access */
#define SBSDIO_SB_ACCESS_2_4B_FLAG 0x08000
/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
#define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid bits in SBADDRLOW */
#define SBSDIO_SBADDRMID_MASK 0xff /* Valid bits in SBADDRMID */
#define SBSDIO_SBADDRHIGH_MASK 0xffU /* Valid bits in SBADDRHIGH */
/* Address bits from SBADDR regs */
#define SBSDIO_SBWINDOW_MASK 0xffff8000
#define SDIOH_READ 0 /* Read request */
#define SDIOH_WRITE 1 /* Write request */
#define SDIOH_DATA_FIX 0 /* Fixed addressing */
#define SDIOH_DATA_INC 1 /* Incremental addressing */
/* internal return code */
#define SUCCESS 0
#define ERROR 1
struct brcmf_sdreg {
int func;
int offset;
int value;
};
struct brcmf_sdio_dev {
struct sdio_func *func[SDIO_MAX_FUNCS];
u8 num_funcs; /* Supported funcs on client */
u32 func_cis_ptr[SDIOD_MAX_IOFUNCS];
u32 sbwad; /* Save backplane window address */
bool regfail; /* status of last reg_r/w call */
void *bus;
atomic_t suspend; /* suspend flag */
wait_queue_head_t request_byte_wait;
wait_queue_head_t request_word_wait;
wait_queue_head_t request_packet_wait;
wait_queue_head_t request_buffer_wait;
};
/* Register/deregister device interrupt handler. */
extern int
brcmf_sdcard_intr_reg(struct brcmf_sdio_dev *sdiodev);
extern int brcmf_sdcard_intr_dereg(struct brcmf_sdio_dev *sdiodev);
/* Access SDIO address space (e.g. CCCR) using CMD52 (single-byte interface).
* fn: function number
* addr: unmodified SDIO-space address
* data: data byte to write
* err: pointer to error code (or NULL)
*/
extern u8 brcmf_sdcard_cfg_read(struct brcmf_sdio_dev *sdiodev, uint func,
u32 addr, int *err);
extern void brcmf_sdcard_cfg_write(struct brcmf_sdio_dev *sdiodev, uint func,
u32 addr, u8 data, int *err);
/* Synchronous access to device (client) core registers via CMD53 to F1.
* addr: backplane address (i.e. >= regsva from attach)
* size: register width in bytes (2 or 4)
* data: data for register write
*/
extern u32
brcmf_sdcard_reg_read(struct brcmf_sdio_dev *sdiodev, u32 addr, uint size);
extern u32
brcmf_sdcard_reg_write(struct brcmf_sdio_dev *sdiodev, u32 addr, uint size,
u32 data);
/* Indicate if last reg read/write failed */
extern bool brcmf_sdcard_regfail(struct brcmf_sdio_dev *sdiodev);
/* Buffer transfer to/from device (client) core via cmd53.
* fn: function number
* addr: backplane address (i.e. >= regsva from attach)
* flags: backplane width, address increment, sync/async
* buf: pointer to memory data buffer
* nbytes: number of bytes to transfer to/from buf
* pkt: pointer to packet associated with buf (if any)
* complete: callback function for command completion (async only)
* handle: handle for completion callback (first arg in callback)
* Returns 0 or error code.
* NOTE: Async operation is not currently supported.
*/
extern int
brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
uint flags, u8 *buf, uint nbytes, struct sk_buff *pkt);
extern int
brcmf_sdcard_recv_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
uint flags, u8 *buf, uint nbytes, struct sk_buff *pkt);
/* Flags bits */
/* Four-byte target (backplane) width (vs. two-byte) */
#define SDIO_REQ_4BYTE 0x1
/* Fixed address (FIFO) (vs. incrementing address) */
#define SDIO_REQ_FIXED 0x2
/* Async request (vs. sync request) */
#define SDIO_REQ_ASYNC 0x4
/* Read/write to memory block (F1, no FIFO) via CMD53 (sync only).
* rw: read or write (0/1)
* addr: direct SDIO address
* buf: pointer to memory data buffer
* nbytes: number of bytes to transfer to/from buf
* Returns 0 or error code.
*/
extern int brcmf_sdcard_rwdata(struct brcmf_sdio_dev *sdiodev, uint rw,
u32 addr, u8 *buf, uint nbytes);
/* Issue an abort to the specified function */
extern int brcmf_sdcard_abort(struct brcmf_sdio_dev *sdiodev, uint fn);
/* platform specific/high level functions */
extern int brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev);
extern int brcmf_sdio_remove(struct brcmf_sdio_dev *sdiodev);
extern int brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev,
u32 address);
/* attach, return handler on success, NULL if failed.
* The handler shall be provided by all subsequent calls. No local cache
* cfghdl points to the starting address of pci device mapped memory
*/
extern int brcmf_sdioh_attach(struct brcmf_sdio_dev *sdiodev);
extern void brcmf_sdioh_detach(struct brcmf_sdio_dev *sdiodev);
/* read or write one byte using cmd52 */
extern int brcmf_sdioh_request_byte(struct brcmf_sdio_dev *sdiodev, uint rw,
uint fnc, uint addr, u8 *byte);
/* read or write 2/4 bytes using cmd53 */
extern int
brcmf_sdioh_request_word(struct brcmf_sdio_dev *sdiodev,
uint rw, uint fnc, uint addr,
u32 *word, uint nbyte);
/* read or write any buffer using cmd53 */
extern int
brcmf_sdioh_request_buffer(struct brcmf_sdio_dev *sdiodev,
uint fix_inc, uint rw, uint fnc_num,
u32 addr, uint regwidth,
u32 buflen, u8 *buffer, struct sk_buff *pkt);
/* Watchdog timer interface for pm ops */
extern void brcmf_sdio_wdtmr_enable(struct brcmf_sdio_dev *sdiodev,
bool enable);
extern void *brcmf_sdbrcm_probe(u16 bus_no, u16 slot, u16 func, uint bustype,
u32 regsva, struct brcmf_sdio_dev *sdiodev);
extern void brcmf_sdbrcm_disconnect(void *ptr);
extern void brcmf_sdbrcm_isr(void *arg);
#endif /* _BRCM_SDH_H_ */