blob: b1e88f26b748b6e935516bdb6a631087ca119606 [file] [log] [blame]
==============================
Fusion-MPT MPI 2.0 Header File Change History
==============================
Copyright (c) 2000-2010 LSI Corporation.
---------------------------------------
Header Set Release Version: 02.00.14
Header Set Release Date: 10-28-09
---------------------------------------
Filename Current version Prior version
---------- --------------- -------------
mpi2.h 02.00.14 02.00.13
mpi2_cnfg.h 02.00.13 02.00.12
mpi2_init.h 02.00.08 02.00.07
mpi2_ioc.h 02.00.13 02.00.12
mpi2_raid.h 02.00.04 02.00.04
mpi2_sas.h 02.00.03 02.00.02
mpi2_targ.h 02.00.03 02.00.03
mpi2_tool.h 02.00.04 02.00.04
mpi2_type.h 02.00.00 02.00.00
mpi2_ra.h 02.00.00 02.00.00
mpi2_hbd.h 02.00.00
mpi2_history.txt 02.00.14 02.00.13
* Date Version Description
* -------- -------- ------------------------------------------------------
mpi2.h
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
* 06-04-07 02.00.01 Bumped MPI2_HEADER_VERSION_UNIT.
* 06-26-07 02.00.02 Bumped MPI2_HEADER_VERSION_UNIT.
* 08-31-07 02.00.03 Bumped MPI2_HEADER_VERSION_UNIT.
* Moved ReplyPostHostIndex register to offset 0x6C of the
* MPI2_SYSTEM_INTERFACE_REGS and modified the define for
* MPI2_REPLY_POST_HOST_INDEX_OFFSET.
* Added union of request descriptors.
* Added union of reply descriptors.
* 10-31-07 02.00.04 Bumped MPI2_HEADER_VERSION_UNIT.
* Added define for MPI2_VERSION_02_00.
* Fixed the size of the FunctionDependent5 field in the
* MPI2_DEFAULT_REPLY structure.
* 12-18-07 02.00.05 Bumped MPI2_HEADER_VERSION_UNIT.
* Removed the MPI-defined Fault Codes and extended the
* product specific codes up to 0xEFFF.
* Added a sixth key value for the WriteSequence register
* and changed the flush value to 0x0.
* Added message function codes for Diagnostic Buffer Post
* and Diagnsotic Release.
* New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED
* Moved MPI2_VERSION_UNION from mpi2_ioc.h.
* 02-29-08 02.00.06 Bumped MPI2_HEADER_VERSION_UNIT.
* 03-03-08 02.00.07 Bumped MPI2_HEADER_VERSION_UNIT.
* 05-21-08 02.00.08 Bumped MPI2_HEADER_VERSION_UNIT.
* Added #defines for marking a reply descriptor as unused.
* 06-27-08 02.00.09 Bumped MPI2_HEADER_VERSION_UNIT.
* 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT.
* Moved LUN field defines from mpi2_init.h.
* 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT.
* 05-06-09 02.00.12 Bumped MPI2_HEADER_VERSION_UNIT.
* In all request and reply descriptors, replaced VF_ID
* field with MSIxIndex field.
* Removed DevHandle field from
* MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those
* bytes reserved.
* Added RAID Accelerator functionality.
* 07-30-09 02.00.13 Bumped MPI2_HEADER_VERSION_UNIT.
* 10-28-09 02.00.14 Bumped MPI2_HEADER_VERSION_UNIT.
* Added MSI-x index mask and shift for Reply Post Host
* Index register.
* Added function code for Host Based Discovery Action.
* --------------------------------------------------------------------------
mpi2_cnfg.h
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
* 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags.
* Added Manufacturing Page 11.
* Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE
* define.
* 06-26-07 02.00.02 Adding generic structure for product-specific
* Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS.
* Rework of BIOS Page 2 configuration page.
* Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the
* forms.
* Added configuration pages IOC Page 8 and Driver
* Persistent Mapping Page 0.
* 08-31-07 02.00.03 Modified configuration pages dealing with Integrated
* RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1,
* RAID Physical Disk Pages 0 and 1, RAID Configuration
* Page 0).
* Added new value for AccessStatus field of SAS Device
* Page 0 (_SATA_NEEDS_INITIALIZATION).
* 10-31-07 02.00.04 Added missing SEPDevHandle field to
* MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
* 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for
* NVDATA.
* Modified IOC Page 7 to use masks and added field for
* SASBroadcastPrimitiveMasks.
* Added MPI2_CONFIG_PAGE_BIOS_4.
* Added MPI2_CONFIG_PAGE_LOG_0.
* 02-29-08 02.00.06 Modified various names to make them 32-character unique.
* Added SAS Device IDs.
* Updated Integrated RAID configuration pages including
* Manufacturing Page 4, IOC Page 6, and RAID Configuration
* Page 0.
* 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA.
* Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION.
* Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING.
* Added missing MaxNumRoutedSasAddresses field to
* MPI2_CONFIG_PAGE_EXPANDER_0.
* Added SAS Port Page 0.
* Modified structure layout for
* MPI2_CONFIG_PAGE_DRIVER_MAPPING_0.
* 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use
* MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array.
* 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF
* to 0x000000FF.
* Added two new values for the Physical Disk Coercion Size
* bits in the Flags field of Manufacturing Page 4.
* Added product-specific Manufacturing pages 16 to 31.
* Modified Flags bits for controlling write cache on SATA
* drives in IO Unit Page 1.
* Added new bit to AdditionalControlFlags of SAS IO Unit
* Page 1 to control Invalid Topology Correction.
* Added SupportedPhysDisks field to RAID Volume Page 1 and
* added related defines.
* Added additional defines for RAID Volume Page 0
* VolumeStatusFlags field.
* Modified meaning of RAID Volume Page 0 VolumeSettings
* define for auto-configure of hot-swap drives.
* Added PhysDiskAttributes field (and related defines) to
* RAID Physical Disk Page 0.
* Added MPI2_SAS_PHYINFO_PHY_VACANT define.
* Added three new DiscoveryStatus bits for SAS IO Unit
* Page 0 and SAS Expander Page 0.
* Removed multiplexing information from SAS IO Unit pages.
* Added BootDeviceWaitTime field to SAS IO Unit Page 4.
* Removed Zone Address Resolved bit from PhyInfo and from
* Expander Page 0 Flags field.
* Added two new AccessStatus values to SAS Device Page 0
* for indicating routing problems. Added 3 reserved words
* to this page.
* 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3.
* Inserted missing reserved field into structure for IOC
* Page 6.
* Added more pending task bits to RAID Volume Page 0
* VolumeStatusFlags defines.
* Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define.
* Added a new DiscoveryStatus bit for SAS IO Unit Page 0
* and SAS Expander Page 0 to flag a downstream initiator
* when in simplified routing mode.
* Removed SATA Init Failure defines for DiscoveryStatus
* fields of SAS IO Unit Page 0 and SAS Expander Page 0.
* Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
* Added PortGroups, DmaGroup, and ControlGroup fields to
* SAS Device Page 0.
* 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO
* Unit Page 6.
* Added expander reduced functionality data to SAS
* Expander Page 0.
* Added SAS PHY Page 2 and SAS PHY Page 3.
* 07-30-09 02.00.12 Added IO Unit Page 7.
* Added new device ids.
* Added SAS IO Unit Page 5.
* Added partial and slumber power management capable flags
* to SAS Device Page 0 Flags field.
* Added PhyInfo defines for power condition.
* Added Ethernet configuration pages.
* 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
* Added SAS PHY Page 4 structure and defines.
* --------------------------------------------------------------------------
mpi2_init.h
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
* 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t.
* 12-18-07 02.00.02 Modified Task Management Target Reset Method defines.
* 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention.
* 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY.
* 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t.
* 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO
* Control field Task Attribute flags.
* Moved LUN field defines to mpi2.h becasue they are
* common to many structures.
* 05-06-09 02.00.07 Changed task management type of Query Unit Attention to
* Query Asynchronous Event.
* Defined two new bits in the SlotStatus field of the SCSI
* Enclosure Processor Request and Reply.
* 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for
* both SCSI IO Error Reply and SCSI Task Management Reply.
* Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY.
* Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define.
* --------------------------------------------------------------------------
mpi2_ioc.h
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
* 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to
* MaxTargets.
* Added TotalImageSize field to FWDownload Request.
* Added reserved words to FWUpload Request.
* 06-26-07 02.00.02 Added IR Configuration Change List Event.
* 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit
* request and replaced it with
* ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth.
* Replaced the MinReplyQueueDepth field of the IOCFacts
* reply with MaxReplyDescriptorPostQueueDepth.
* Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum
* depth for the Reply Descriptor Post Queue.
* Added SASAddress field to Initiator Device Table
* Overflow Event data.
* 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING
* for SAS Initiator Device Status Change Event data.
* Modified Reason Code defines for SAS Topology Change
* List Event data, including adding a bit for PHY Vacant
* status, and adding a mask for the Reason Code.
* Added define for
* MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING.
* Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID.
* 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of
* the IOCFacts Reply.
* Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
* Moved MPI2_VERSION_UNION to mpi2.h.
* Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks
* instead of enables, and added SASBroadcastPrimitiveMasks
* field.
* Added Log Entry Added Event and related structure.
* 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID.
* Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET.
* Added MaxVolumes and MaxPersistentEntries fields to
* IOCFacts reply.
* Added ProtocalFlags and IOCCapabilities fields to
* MPI2_FW_IMAGE_HEADER.
* Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT.
* 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to
* a U16 (from a U32).
* Removed extra 's' from EventMasks name.
* 06-27-08 02.00.08 Fixed an offset in a comment.
* 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST.
* Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and
* renamed MinReplyFrameSize to ReplyFrameSize.
* Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX.
* Added two new RAIDOperation values for Integrated RAID
* Operations Status Event data.
* Added four new IR Configuration Change List Event data
* ReasonCode values.
* Added two new ReasonCode defines for SAS Device Status
* Change Event data.
* Added three new DiscoveryStatus bits for the SAS
* Discovery event data.
* Added Multiplexing Status Change bit to the PhyStatus
* field of the SAS Topology Change List event data.
* Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY.
* BootFlags are now product-specific.
* Added defines for the indivdual signature bytes
* for MPI2_INIT_IMAGE_FOOTER.
* 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define.
* Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR
* define.
* Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE
* define.
* Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define.
* 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define.
* Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define.
* Added two new reason codes for SAS Device Status Change
* Event.
* Added new event: SAS PHY Counter.
* 07-30-09 02.00.12 Added GPIO Interrupt event define and structure.
* Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
* Added new product id family for 2208.
* 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST.
* Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY.
* Added MinDevHandle field to MPI2_IOC_FACTS_REPLY.
* Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY.
* Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define.
* Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define.
* Added Host Based Discovery Phy Event data.
* Added defines for ProductID Product field
* (MPI2_FW_HEADER_PID_).
* Modified values for SAS ProductID Family
* (MPI2_FW_HEADER_PID_FAMILY_).
* --------------------------------------------------------------------------
mpi2_raid.h
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
* 08-31-07 02.00.01 Modifications to RAID Action request and reply,
* including the Actions and ActionData.
* 02-29-08 02.00.02 Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD.
* 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that
* the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT
* can be sized by the build environment.
* 07-30-09 02.00.04 Added proper define for the Use Default Settings bit of
* VolumeCreationFlags and marked the old one as obsolete.
* 05-12-10 02.00.05 Added MPI2_RAID_VOL_FLAGS_OP_MDC define.
* --------------------------------------------------------------------------
mpi2_sas.h
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
* 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit
* Control Request.
* 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control
* Request.
* 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST
* to MPI2_SGE_IO_UNION since it supports chained SGLs.
* 05-12-10 02.00.04 Modified some comments.
* --------------------------------------------------------------------------
mpi2_targ.h
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
* 08-31-07 02.00.01 Added Command Buffer Data Location Address Space bits to
* BufferPostFlags field of CommandBufferPostBase Request.
* 02-29-08 02.00.02 Modified various names to make them 32-character unique.
* 10-02-08 02.00.03 Removed NextCmdBufferOffset from
* MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST.
* Target Status Send Request only takes a single SGE for
* response data.
* --------------------------------------------------------------------------
mpi2_tool.h
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
* 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release
* structures and defines.
* 02-29-08 02.00.02 Modified various names to make them 32-character unique.
* 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool.
* 07-30-09 02.00.04 Added ExtendedType field to DiagnosticBufferPost request
* and reply messages.
* Added MPI2_DIAG_BUF_TYPE_EXTENDED.
* Incremented MPI2_DIAG_BUF_TYPE_COUNT.
* 05-12-10 02.00.05 Added Diagnostic Data Upload tool.
* --------------------------------------------------------------------------
mpi2_type.h
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
* --------------------------------------------------------------------------
mpi2_ra.h
* 05-06-09 02.00.00 Initial version.
* --------------------------------------------------------------------------
mpi2_hbd.h
* 10-28-09 02.00.00 Initial version.
* --------------------------------------------------------------------------
mpi2_history.txt Parts list history
Filename 02.00.14 02.00.13 02.00.12
---------- -------- -------- --------
mpi2.h 02.00.14 02.00.13 02.00.12
mpi2_cnfg.h 02.00.13 02.00.12 02.00.11
mpi2_init.h 02.00.08 02.00.07 02.00.07
mpi2_ioc.h 02.00.13 02.00.12 02.00.11
mpi2_raid.h 02.00.04 02.00.04 02.00.03
mpi2_sas.h 02.00.03 02.00.02 02.00.02
mpi2_targ.h 02.00.03 02.00.03 02.00.03
mpi2_tool.h 02.00.04 02.00.04 02.00.03
mpi2_type.h 02.00.00 02.00.00 02.00.00
mpi2_ra.h 02.00.00 02.00.00 02.00.00
mpi2_hbd.h 02.00.00
Filename 02.00.11 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06
---------- -------- -------- -------- -------- -------- --------
mpi2.h 02.00.11 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06
mpi2_cnfg.h 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06 02.00.06
mpi2_init.h 02.00.06 02.00.06 02.00.05 02.00.05 02.00.04 02.00.03
mpi2_ioc.h 02.00.10 02.00.09 02.00.08 02.00.07 02.00.07 02.00.06
mpi2_raid.h 02.00.03 02.00.03 02.00.03 02.00.03 02.00.02 02.00.02
mpi2_sas.h 02.00.02 02.00.02 02.00.01 02.00.01 02.00.01 02.00.01
mpi2_targ.h 02.00.03 02.00.03 02.00.02 02.00.02 02.00.02 02.00.02
mpi2_tool.h 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02
mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00
Filename 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00
---------- -------- -------- -------- -------- -------- --------
mpi2.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00
mpi2_cnfg.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00
mpi2_init.h 02.00.02 02.00.01 02.00.00 02.00.00 02.00.00 02.00.00
mpi2_ioc.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00
mpi2_raid.h 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 02.00.00
mpi2_sas.h 02.00.01 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00
mpi2_targ.h 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 02.00.00
mpi2_tool.h 02.00.01 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00
mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00