drivers/usb/host/ohci-cns3xxx.c

/*
 * Copyright 2008 Cavium Networks
 *
 * This file is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License, Version 2, as
 * published by the Free Software Foundation.
 */

#include <linux/platform_device.h>
#include <linux/atomic.h>
#include <mach/cns3xxx.h>
#include <mach/pm.h>

static int __devinit
cns3xxx_ohci_start(struct usb_hcd *hcd)
{
	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
	int ret;

	/*
	 * EHCI and OHCI share the same clock and power,
	 * resetting twice would cause the 1st controller been reset.
	 * Therefore only do power up  at the first up device, and
	 * power down at the last down device.
	 *
	 * Set USB AHB INCR length to 16
	 */
	if (atomic_inc_return(&usb_pwr_ref) == 1) {
		cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
		cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
		cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
		__raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
			MISC_CHIP_CONFIG_REG);
	}

	ret = ohci_init(ohci);
	if (ret < 0)
		return ret;

	ohci->num_ports = 1;

	ret = ohci_run(ohci);
	if (ret < 0) {
		err("can't start %s", hcd->self.bus_name);
		ohci_stop(hcd);
		return ret;
	}
	return 0;
}

static const struct hc_driver cns3xxx_ohci_hc_driver = {
	.description		= hcd_name,
	.product_desc		= "CNS3XXX OHCI Host controller",
	.hcd_priv_size		= sizeof(struct ohci_hcd),
	.irq			= ohci_irq,
	.flags			= HCD_USB11 | HCD_MEMORY,
	.start			= cns3xxx_ohci_start,
	.stop			= ohci_stop,
	.shutdown		= ohci_shutdown,
	.urb_enqueue		= ohci_urb_enqueue,
	.urb_dequeue		= ohci_urb_dequeue,
	.endpoint_disable	= ohci_endpoint_disable,
	.get_frame_number	= ohci_get_frame,
	.hub_status_data	= ohci_hub_status_data,
	.hub_control		= ohci_hub_control,
#ifdef CONFIG_PM
	.bus_suspend		= ohci_bus_suspend,
	.bus_resume		= ohci_bus_resume,
#endif
	.start_port_reset	= ohci_start_port_reset,
};

static int cns3xxx_ohci_probe(struct platform_device *pdev)
{
	struct device *dev = &pdev->dev;
	struct usb_hcd *hcd;
	const struct hc_driver *driver = &cns3xxx_ohci_hc_driver;
	struct resource *res;
	int irq;
	int retval;

	if (usb_disabled())
		return -ENODEV;

	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
	if (!res) {
		dev_err(dev, "Found HC with no IRQ.\n");
		return -ENODEV;
	}
	irq = res->start;

	hcd = usb_create_hcd(driver, dev, dev_name(dev));
	if (!hcd)
		return -ENOMEM;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res) {
		dev_err(dev, "Found HC with no register addr.\n");
		retval = -ENODEV;
		goto err1;
	}
	hcd->rsrc_start = res->start;
	hcd->rsrc_len = res->end - res->start + 1;

	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
			driver->description)) {
		dev_dbg(dev, "controller already in use\n");
		retval = -EBUSY;
		goto err1;
	}

	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
	if (!hcd->regs) {
		dev_dbg(dev, "error mapping memory\n");
		retval = -EFAULT;
		goto err2;
	}

	ohci_hcd_init(hcd_to_ohci(hcd));

	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
	if (retval == 0)
		return retval;

	iounmap(hcd->regs);
err2:
	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err1:
	usb_put_hcd(hcd);
	return retval;
}

static int cns3xxx_ohci_remove(struct platform_device *pdev)
{
	struct usb_hcd *hcd = platform_get_drvdata(pdev);

	usb_remove_hcd(hcd);
	iounmap(hcd->regs);
	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);

	/*
	 * EHCI and OHCI share the same clock and power,
	 * resetting twice would cause the 1st controller been reset.
	 * Therefore only do power up  at the first up device, and
	 * power down at the last down device.
	 */
	if (atomic_dec_return(&usb_pwr_ref) == 0)
		cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);

	usb_put_hcd(hcd);

	platform_set_drvdata(pdev, NULL);

	return 0;
}

MODULE_ALIAS("platform:cns3xxx-ohci");

static struct platform_driver ohci_hcd_cns3xxx_driver = {
	.probe = cns3xxx_ohci_probe,
	.remove = cns3xxx_ohci_remove,
	.driver = {
		.name = "cns3xxx-ohci",
	},
};