| .file "sinh.s" |
| |
| |
| // Copyright (c) 2000 - 2005, Intel Corporation |
| // All rights reserved. |
| // |
| // Contributed 2000 by the Intel Numerics Group, Intel Corporation |
| // |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions are |
| // met: |
| // |
| // * Redistributions of source code must retain the above copyright |
| // notice, this list of conditions and the following disclaimer. |
| // |
| // * Redistributions in binary form must reproduce the above copyright |
| // notice, this list of conditions and the following disclaimer in the |
| // documentation and/or other materials provided with the distribution. |
| // |
| // * The name of Intel Corporation may not be used to endorse or promote |
| // products derived from this software without specific prior written |
| // permission. |
| |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL OR ITS |
| // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| // EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| // PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| // PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY |
| // OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR TORT (INCLUDING |
| // NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| // SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| // |
| // Intel Corporation is the author of this code, and requests that all |
| // problem reports or change requests be submitted to it directly at |
| // http://www.intel.com/software/products/opensource/libraries/num.htm. |
| // |
| // History |
| //============================================================== |
| // 02/02/00 Initial version |
| // 04/04/00 Unwind support added |
| // 08/15/00 Bundle added after call to __libm_error_support to properly |
| // set [the previously overwritten] GR_Parameter_RESULT. |
| // 10/12/00 Update to set denormal operand and underflow flags |
| // 01/22/01 Fixed to set inexact flag for small args. |
| // 05/02/01 Reworked to improve speed of all paths |
| // 05/20/02 Cleaned up namespace and sf0 syntax |
| // 11/20/02 Improved speed with new algorithm |
| // 03/31/05 Reformatted delimiters between data tables |
| |
| // API |
| //============================================================== |
| // double sinh(double) |
| |
| // Overview of operation |
| //============================================================== |
| // Case 1: 0 < |x| < 2^-60 |
| // Result = x, computed by x+sgn(x)*x^2) to handle flags and rounding |
| // |
| // Case 2: 2^-60 < |x| < 0.25 |
| // Evaluate sinh(x) by a 13th order polynomial |
| // Care is take for the order of multiplication; and A1 is not exactly 1/3!, |
| // A2 is not exactly 1/5!, etc. |
| // sinh(x) = x + (A1*x^3 + A2*x^5 + A3*x^7 + A4*x^9 + A5*x^11 + A6*x^13) |
| // |
| // Case 3: 0.25 < |x| < 710.47586 |
| // Algorithm is based on the identity sinh(x) = ( exp(x) - exp(-x) ) / 2. |
| // The algorithm for exp is described as below. There are a number of |
| // economies from evaluating both exp(x) and exp(-x). Although we |
| // are evaluating both quantities, only where the quantities diverge do we |
| // duplicate the computations. The basic algorithm for exp(x) is described |
| // below. |
| // |
| // Take the input x. w is "how many log2/128 in x?" |
| // w = x * 128/log2 |
| // n = int(w) |
| // x = n log2/128 + r + delta |
| |
| // n = 128M + index_1 + 2^4 index_2 |
| // x = M log2 + (log2/128) index_1 + (log2/8) index_2 + r + delta |
| |
| // exp(x) = 2^M 2^(index_1/128) 2^(index_2/8) exp(r) exp(delta) |
| // Construct 2^M |
| // Get 2^(index_1/128) from table_1; |
| // Get 2^(index_2/8) from table_2; |
| // Calculate exp(r) by 5th order polynomial |
| // r = x - n (log2/128)_high |
| // delta = - n (log2/128)_low |
| // Calculate exp(delta) as 1 + delta |
| |
| |
| // Special values |
| //============================================================== |
| // sinh(+0) = +0 |
| // sinh(-0) = -0 |
| |
| // sinh(+qnan) = +qnan |
| // sinh(-qnan) = -qnan |
| // sinh(+snan) = +qnan |
| // sinh(-snan) = -qnan |
| |
| // sinh(-inf) = -inf |
| // sinh(+inf) = +inf |
| |
| // Overflow and Underflow |
| //======================= |
| // sinh(x) = largest double normal when |
| // |x| = 710.47586 = 0x408633ce8fb9f87d |
| // |
| // Underflow is handled as described in case 1 above |
| |
| // Registers used |
| //============================================================== |
| // Floating Point registers used: |
| // f8, input, output |
| // f6 -> f15, f32 -> f61 |
| |
| // General registers used: |
| // r14 -> r40 |
| |
| // Predicate registers used: |
| // p6 -> p15 |
| |
| // Assembly macros |
| //============================================================== |
| |
| rRshf = r14 |
| rN_neg = r14 |
| rAD_TB1 = r15 |
| rAD_TB2 = r16 |
| rAD_P = r17 |
| rN = r18 |
| rIndex_1 = r19 |
| rIndex_2_16 = r20 |
| rM = r21 |
| rBiased_M = r21 |
| rSig_inv_ln2 = r22 |
| rIndex_1_neg = r22 |
| rExp_bias = r23 |
| rExp_bias_minus_1 = r23 |
| rExp_mask = r24 |
| rTmp = r24 |
| rGt_ln = r24 |
| rIndex_2_16_neg = r24 |
| rM_neg = r25 |
| rBiased_M_neg = r25 |
| rRshf_2to56 = r26 |
| rAD_T1_neg = r26 |
| rExp_2tom56 = r28 |
| rAD_T2_neg = r28 |
| rAD_T1 = r29 |
| rAD_T2 = r30 |
| rSignexp_x = r31 |
| rExp_x = r31 |
| |
| GR_SAVE_B0 = r33 |
| GR_SAVE_PFS = r34 |
| GR_SAVE_GP = r35 |
| |
| GR_Parameter_X = r37 |
| GR_Parameter_Y = r38 |
| GR_Parameter_RESULT = r39 |
| GR_Parameter_TAG = r40 |
| |
| |
| FR_X = f10 |
| FR_Y = f1 |
| FR_RESULT = f8 |
| |
| fRSHF_2TO56 = f6 |
| fINV_LN2_2TO63 = f7 |
| fW_2TO56_RSH = f9 |
| f2TOM56 = f11 |
| fP5 = f12 |
| fP4 = f13 |
| fP3 = f14 |
| fP2 = f15 |
| |
| fLn2_by_128_hi = f33 |
| fLn2_by_128_lo = f34 |
| |
| fRSHF = f35 |
| fNfloat = f36 |
| fNormX = f37 |
| fR = f38 |
| fF = f39 |
| |
| fRsq = f40 |
| f2M = f41 |
| fS1 = f42 |
| fT1 = f42 |
| fS2 = f43 |
| fT2 = f43 |
| fS = f43 |
| fWre_urm_f8 = f44 |
| fAbsX = f44 |
| |
| fMIN_DBL_OFLOW_ARG = f45 |
| fMAX_DBL_NORM_ARG = f46 |
| fXsq = f47 |
| fX4 = f48 |
| fGt_pln = f49 |
| fTmp = f49 |
| |
| fP54 = f50 |
| fP5432 = f50 |
| fP32 = f51 |
| fP = f52 |
| fP54_neg = f53 |
| fP5432_neg = f53 |
| fP32_neg = f54 |
| fP_neg = f55 |
| fF_neg = f56 |
| |
| f2M_neg = f57 |
| fS1_neg = f58 |
| fT1_neg = f58 |
| fS2_neg = f59 |
| fT2_neg = f59 |
| fS_neg = f59 |
| fExp = f60 |
| fExp_neg = f61 |
| |
| fA6 = f50 |
| fA65 = f50 |
| fA6543 = f50 |
| fA654321 = f50 |
| fA5 = f51 |
| fA4 = f52 |
| fA43 = f52 |
| fA3 = f53 |
| fA2 = f54 |
| fA21 = f54 |
| fA1 = f55 |
| fX3 = f56 |
| |
| // Data tables |
| //============================================================== |
| |
| RODATA |
| .align 16 |
| |
| // ************* DO NOT CHANGE ORDER OF THESE TABLES ******************** |
| |
| // double-extended 1/ln(2) |
| // 3fff b8aa 3b29 5c17 f0bb be87fed0691d3e88 |
| // 3fff b8aa 3b29 5c17 f0bc |
| // For speed the significand will be loaded directly with a movl and setf.sig |
| // and the exponent will be bias+63 instead of bias+0. Thus subsequent |
| // computations need to scale appropriately. |
| // The constant 128/ln(2) is needed for the computation of w. This is also |
| // obtained by scaling the computations. |
| // |
| // Two shifting constants are loaded directly with movl and setf.d. |
| // 1. fRSHF_2TO56 = 1.1000..00 * 2^(63-7) |
| // This constant is added to x*1/ln2 to shift the integer part of |
| // x*128/ln2 into the rightmost bits of the significand. |
| // The result of this fma is fW_2TO56_RSH. |
| // 2. fRSHF = 1.1000..00 * 2^(63) |
| // This constant is subtracted from fW_2TO56_RSH * 2^(-56) to give |
| // the integer part of w, n, as a floating-point number. |
| // The result of this fms is fNfloat. |
| |
| |
| LOCAL_OBJECT_START(exp_table_1) |
| data8 0x408633ce8fb9f87e // smallest dbl overflow arg |
| data8 0x408633ce8fb9f87d // largest dbl arg to give normal dbl result |
| data8 0xb17217f7d1cf79ab , 0x00003ff7 // ln2/128 hi |
| data8 0xc9e3b39803f2f6af , 0x00003fb7 // ln2/128 lo |
| // |
| // Table 1 is 2^(index_1/128) where |
| // index_1 goes from 0 to 15 |
| // |
| data8 0x8000000000000000 , 0x00003FFF |
| data8 0x80B1ED4FD999AB6C , 0x00003FFF |
| data8 0x8164D1F3BC030773 , 0x00003FFF |
| data8 0x8218AF4373FC25EC , 0x00003FFF |
| data8 0x82CD8698AC2BA1D7 , 0x00003FFF |
| data8 0x8383594EEFB6EE37 , 0x00003FFF |
| data8 0x843A28C3ACDE4046 , 0x00003FFF |
| data8 0x84F1F656379C1A29 , 0x00003FFF |
| data8 0x85AAC367CC487B15 , 0x00003FFF |
| data8 0x8664915B923FBA04 , 0x00003FFF |
| data8 0x871F61969E8D1010 , 0x00003FFF |
| data8 0x87DB357FF698D792 , 0x00003FFF |
| data8 0x88980E8092DA8527 , 0x00003FFF |
| data8 0x8955EE03618E5FDD , 0x00003FFF |
| data8 0x8A14D575496EFD9A , 0x00003FFF |
| data8 0x8AD4C6452C728924 , 0x00003FFF |
| LOCAL_OBJECT_END(exp_table_1) |
| |
| // Table 2 is 2^(index_1/8) where |
| // index_2 goes from 0 to 7 |
| LOCAL_OBJECT_START(exp_table_2) |
| data8 0x8000000000000000 , 0x00003FFF |
| data8 0x8B95C1E3EA8BD6E7 , 0x00003FFF |
| data8 0x9837F0518DB8A96F , 0x00003FFF |
| data8 0xA5FED6A9B15138EA , 0x00003FFF |
| data8 0xB504F333F9DE6484 , 0x00003FFF |
| data8 0xC5672A115506DADD , 0x00003FFF |
| data8 0xD744FCCAD69D6AF4 , 0x00003FFF |
| data8 0xEAC0C6E7DD24392F , 0x00003FFF |
| LOCAL_OBJECT_END(exp_table_2) |
| |
| |
| LOCAL_OBJECT_START(exp_p_table) |
| data8 0x3f8111116da21757 //P5 |
| data8 0x3fa55555d787761c //P4 |
| data8 0x3fc5555555555414 //P3 |
| data8 0x3fdffffffffffd6a //P2 |
| LOCAL_OBJECT_END(exp_p_table) |
| |
| LOCAL_OBJECT_START(sinh_p_table) |
| data8 0xB08AF9AE78C1239F, 0x00003FDE // A6 |
| data8 0xB8EF1D28926D8891, 0x00003FEC // A4 |
| data8 0x8888888888888412, 0x00003FF8 // A2 |
| data8 0xD732377688025BE9, 0x00003FE5 // A5 |
| data8 0xD00D00D00D4D39F2, 0x00003FF2 // A3 |
| data8 0xAAAAAAAAAAAAAAAB, 0x00003FFC // A1 |
| LOCAL_OBJECT_END(sinh_p_table) |
| |
| |
| .section .text |
| GLOBAL_IEEE754_ENTRY(sinh) |
| |
| { .mlx |
| getf.exp rSignexp_x = f8 // Must recompute if x unorm |
| movl rSig_inv_ln2 = 0xb8aa3b295c17f0bc // significand of 1/ln2 |
| } |
| { .mlx |
| addl rAD_TB1 = @ltoff(exp_table_1), gp |
| movl rRshf_2to56 = 0x4768000000000000 // 1.10000 2^(63+56) |
| } |
| ;; |
| |
| { .mfi |
| ld8 rAD_TB1 = [rAD_TB1] |
| fclass.m p6,p0 = f8,0x0b // Test for x=unorm |
| mov rExp_mask = 0x1ffff |
| } |
| { .mfi |
| mov rExp_bias = 0xffff |
| fnorm.s1 fNormX = f8 |
| mov rExp_2tom56 = 0xffff-56 |
| } |
| ;; |
| |
| // Form two constants we need |
| // 1/ln2 * 2^63 to compute w = x * 1/ln2 * 128 |
| // 1.1000..000 * 2^(63+63-7) to right shift int(w) into the significand |
| |
| { .mfi |
| setf.sig fINV_LN2_2TO63 = rSig_inv_ln2 // form 1/ln2 * 2^63 |
| fclass.m p8,p0 = f8,0x07 // Test for x=0 |
| nop.i 999 |
| } |
| { .mlx |
| setf.d fRSHF_2TO56 = rRshf_2to56 // Form const 1.100 * 2^(63+56) |
| movl rRshf = 0x43e8000000000000 // 1.10000 2^63 for right shift |
| } |
| ;; |
| |
| { .mfi |
| ldfpd fMIN_DBL_OFLOW_ARG, fMAX_DBL_NORM_ARG = [rAD_TB1],16 |
| fclass.m p10,p0 = f8,0x1e3 // Test for x=inf, nan, NaT |
| nop.i 0 |
| } |
| { .mfb |
| setf.exp f2TOM56 = rExp_2tom56 // form 2^-56 for scaling Nfloat |
| nop.f 0 |
| (p6) br.cond.spnt SINH_UNORM // Branch if x=unorm |
| } |
| ;; |
| |
| SINH_COMMON: |
| { .mfi |
| ldfe fLn2_by_128_hi = [rAD_TB1],16 |
| nop.f 0 |
| nop.i 0 |
| } |
| { .mfb |
| setf.d fRSHF = rRshf // Form right shift const 1.100 * 2^63 |
| nop.f 0 |
| (p8) br.ret.spnt b0 // Exit for x=0, result=x |
| } |
| ;; |
| |
| { .mfi |
| ldfe fLn2_by_128_lo = [rAD_TB1],16 |
| nop.f 0 |
| nop.i 0 |
| } |
| { .mfb |
| and rExp_x = rExp_mask, rSignexp_x // Biased exponent of x |
| (p10) fma.d.s0 f8 = f8,f1,f0 // Result if x=inf, nan, NaT |
| (p10) br.ret.spnt b0 // quick exit for x=inf, nan, NaT |
| } |
| ;; |
| |
| // After that last load rAD_TB1 points to the beginning of table 1 |
| { .mfi |
| nop.m 0 |
| fcmp.eq.s0 p6,p0 = f8, f0 // Dummy to set D |
| sub rExp_x = rExp_x, rExp_bias // True exponent of x |
| } |
| ;; |
| |
| { .mfi |
| nop.m 0 |
| fmerge.s fAbsX = f0, fNormX // Form |x| |
| nop.i 0 |
| } |
| { .mfb |
| cmp.gt p7, p0 = -2, rExp_x // Test |x| < 2^(-2) |
| fma.s1 fXsq = fNormX, fNormX, f0 // x*x for small path |
| (p7) br.cond.spnt SINH_SMALL // Branch if 0 < |x| < 2^-2 |
| } |
| ;; |
| |
| // W = X * Inv_log2_by_128 |
| // By adding 1.10...0*2^63 we shift and get round_int(W) in significand. |
| // We actually add 1.10...0*2^56 to X * Inv_log2 to do the same thing. |
| |
| { .mfi |
| add rAD_P = 0x180, rAD_TB1 |
| fma.s1 fW_2TO56_RSH = fNormX, fINV_LN2_2TO63, fRSHF_2TO56 |
| add rAD_TB2 = 0x100, rAD_TB1 |
| } |
| ;; |
| |
| // Divide arguments into the following categories: |
| // Certain Safe - 0.25 <= |x| <= MAX_DBL_NORM_ARG |
| // Possible Overflow p14 - MAX_DBL_NORM_ARG < |x| < MIN_DBL_OFLOW_ARG |
| // Certain Overflow p15 - MIN_DBL_OFLOW_ARG <= |x| < +inf |
| // |
| // If the input is really a double arg, then there will never be |
| // "Possible Overflow" arguments. |
| // |
| |
| { .mfi |
| ldfpd fP5, fP4 = [rAD_P] ,16 |
| fcmp.ge.s1 p15,p14 = fAbsX,fMIN_DBL_OFLOW_ARG |
| nop.i 0 |
| } |
| ;; |
| |
| // Nfloat = round_int(W) |
| // The signficand of fW_2TO56_RSH contains the rounded integer part of W, |
| // as a twos complement number in the lower bits (that is, it may be negative). |
| // That twos complement number (called N) is put into rN. |
| |
| // Since fW_2TO56_RSH is scaled by 2^56, it must be multiplied by 2^-56 |
| // before the shift constant 1.10000 * 2^63 is subtracted to yield fNfloat. |
| // Thus, fNfloat contains the floating point version of N |
| |
| { .mfi |
| ldfpd fP3, fP2 = [rAD_P] |
| (p14) fcmp.gt.unc.s1 p14,p0 = fAbsX,fMAX_DBL_NORM_ARG |
| nop.i 0 |
| } |
| { .mfb |
| nop.m 0 |
| fms.s1 fNfloat = fW_2TO56_RSH, f2TOM56, fRSHF |
| (p15) br.cond.spnt SINH_CERTAIN_OVERFLOW |
| } |
| ;; |
| |
| { .mfi |
| getf.sig rN = fW_2TO56_RSH |
| nop.f 0 |
| mov rExp_bias_minus_1 = 0xfffe |
| } |
| ;; |
| |
| // rIndex_1 has index_1 |
| // rIndex_2_16 has index_2 * 16 |
| // rBiased_M has M |
| |
| // rM has true M |
| // r = x - Nfloat * ln2_by_128_hi |
| // f = 1 - Nfloat * ln2_by_128_lo |
| { .mfi |
| and rIndex_1 = 0x0f, rN |
| fnma.s1 fR = fNfloat, fLn2_by_128_hi, fNormX |
| shr rM = rN, 0x7 |
| } |
| { .mfi |
| and rIndex_2_16 = 0x70, rN |
| fnma.s1 fF = fNfloat, fLn2_by_128_lo, f1 |
| sub rN_neg = r0, rN |
| } |
| ;; |
| |
| { .mmi |
| and rIndex_1_neg = 0x0f, rN_neg |
| add rBiased_M = rExp_bias_minus_1, rM |
| shr rM_neg = rN_neg, 0x7 |
| } |
| { .mmi |
| and rIndex_2_16_neg = 0x70, rN_neg |
| add rAD_T2 = rAD_TB2, rIndex_2_16 |
| shladd rAD_T1 = rIndex_1, 4, rAD_TB1 |
| } |
| ;; |
| |
| // rAD_T1 has address of T1 |
| // rAD_T2 has address if T2 |
| |
| { .mmi |
| setf.exp f2M = rBiased_M |
| ldfe fT2 = [rAD_T2] |
| nop.i 0 |
| } |
| { .mmi |
| add rBiased_M_neg = rExp_bias_minus_1, rM_neg |
| add rAD_T2_neg = rAD_TB2, rIndex_2_16_neg |
| shladd rAD_T1_neg = rIndex_1_neg, 4, rAD_TB1 |
| } |
| ;; |
| |
| // Create Scale = 2^M |
| // Load T1 and T2 |
| { .mmi |
| ldfe fT1 = [rAD_T1] |
| nop.m 0 |
| nop.i 0 |
| } |
| { .mmf |
| setf.exp f2M_neg = rBiased_M_neg |
| ldfe fT2_neg = [rAD_T2_neg] |
| fma.s1 fF_neg = fNfloat, fLn2_by_128_lo, f1 |
| } |
| ;; |
| |
| { .mfi |
| nop.m 0 |
| fma.s1 fRsq = fR, fR, f0 |
| nop.i 0 |
| } |
| { .mfi |
| ldfe fT1_neg = [rAD_T1_neg] |
| fma.s1 fP54 = fR, fP5, fP4 |
| nop.i 0 |
| } |
| ;; |
| |
| { .mfi |
| nop.m 0 |
| fma.s1 fP32 = fR, fP3, fP2 |
| nop.i 0 |
| } |
| { .mfi |
| nop.m 0 |
| fnma.s1 fP54_neg = fR, fP5, fP4 |
| nop.i 0 |
| } |
| ;; |
| |
| { .mfi |
| nop.m 0 |
| fnma.s1 fP32_neg = fR, fP3, fP2 |
| nop.i 0 |
| } |
| ;; |
| |
| { .mfi |
| nop.m 0 |
| fma.s1 fP5432 = fRsq, fP54, fP32 |
| nop.i 0 |
| } |
| { .mfi |
| nop.m 0 |
| fma.s1 fS2 = fF,fT2,f0 |
| nop.i 0 |
| } |
| ;; |
| |
| { .mfi |
| nop.m 0 |
| fma.s1 fS1 = f2M,fT1,f0 |
| nop.i 0 |
| } |
| { .mfi |
| nop.m 0 |
| fma.s1 fP5432_neg = fRsq, fP54_neg, fP32_neg |
| nop.i 0 |
| } |
| ;; |
| |
| { .mfi |
| nop.m 0 |
| fma.s1 fS1_neg = f2M_neg,fT1_neg,f0 |
| nop.i 0 |
| } |
| { .mfi |
| nop.m 0 |
| fma.s1 fS2_neg = fF_neg,fT2_neg,f0 |
| nop.i 0 |
| } |
| ;; |
| |
| { .mfi |
| nop.m 0 |
| fma.s1 fP = fRsq, fP5432, fR |
| nop.i 0 |
| } |
| { .mfi |
| nop.m 0 |
| fma.s1 fS = fS1,fS2,f0 |
| nop.i 0 |
| } |
| ;; |
| |
| { .mfi |
| nop.m 0 |
| fms.s1 fP_neg = fRsq, fP5432_neg, fR |
| nop.i 0 |
| } |
| { .mfi |
| nop.m 0 |
| fma.s1 fS_neg = fS1_neg,fS2_neg,f0 |
| nop.i 0 |
| } |
| ;; |
| |
| { .mfb |
| nop.m 0 |
| fmpy.s0 fTmp = fLn2_by_128_lo, fLn2_by_128_lo // Force inexact |
| (p14) br.cond.spnt SINH_POSSIBLE_OVERFLOW |
| } |
| ;; |
| |
| { .mfi |
| nop.m 0 |
| fma.s1 fExp = fS, fP, fS |
| nop.i 0 |
| } |
| { .mfi |
| nop.m 0 |
| fma.s1 fExp_neg = fS_neg, fP_neg, fS_neg |
| nop.i 0 |
| } |
| ;; |
| |
| { .mfb |
| nop.m 0 |
| fms.d.s0 f8 = fExp, f1, fExp_neg |
| br.ret.sptk b0 // Normal path exit |
| } |
| ;; |
| |
| // Here if 0 < |x| < 0.25 |
| SINH_SMALL: |
| { .mfi |
| add rAD_T1 = 0x1a0, rAD_TB1 |
| fcmp.lt.s1 p7, p8 = fNormX, f0 // Test sign of x |
| cmp.gt p6, p0 = -60, rExp_x // Test |x| < 2^(-60) |
| } |
| { .mfi |
| add rAD_T2 = 0x1d0, rAD_TB1 |
| nop.f 0 |
| nop.i 0 |
| } |
| ;; |
| |
| { .mmb |
| ldfe fA6 = [rAD_T1],16 |
| ldfe fA5 = [rAD_T2],16 |
| (p6) br.cond.spnt SINH_VERY_SMALL // Branch if |x| < 2^(-60) |
| } |
| ;; |
| |
| { .mmi |
| ldfe fA4 = [rAD_T1],16 |
| ldfe fA3 = [rAD_T2],16 |
| nop.i 0 |
| } |
| ;; |
| |
| { .mmi |
| ldfe fA2 = [rAD_T1] |
| ldfe fA1 = [rAD_T2] |
| nop.i 0 |
| } |
| ;; |
| |
| { .mfi |
| nop.m 0 |
| fma.s1 fX3 = fNormX, fXsq, f0 |
| nop.i 0 |
| } |
| { .mfi |
| nop.m 0 |
| fma.s1 fX4 = fXsq, fXsq, f0 |
| nop.i 0 |
| } |
| ;; |
| |
| { .mfi |
| nop.m 0 |
| fma.s1 fA65 = fXsq, fA6, fA5 |
| nop.i 0 |
| } |
| { .mfi |
| nop.m 0 |
| fma.s1 fA43 = fXsq, fA4, fA3 |
| nop.i 0 |
| } |
| ;; |
| |
| { .mfi |
| nop.m 0 |
| fma.s1 fA21 = fXsq, fA2, fA1 |
| nop.i 0 |
| } |
| ;; |
| |
| { .mfi |
| nop.m 0 |
| fma.s1 fA6543 = fX4, fA65, fA43 |
| nop.i 0 |
| } |
| ;; |
| |
| { .mfi |
| nop.m 0 |
| fma.s1 fA654321 = fX4, fA6543, fA21 |
| nop.i 0 |
| } |
| ;; |
| |
| // Dummy multiply to generate inexact |
| { .mfi |
| nop.m 0 |
| fmpy.s0 fTmp = fA6, fA6 |
| nop.i 0 |
| } |
| { .mfb |
| nop.m 0 |
| fma.d.s0 f8 = fA654321, fX3, fNormX |
| br.ret.sptk b0 // Exit if 2^-60 < |x| < 0.25 |
| } |
| ;; |
| |
| SINH_VERY_SMALL: |
| // Here if 0 < |x| < 2^-60 |
| // Compute result by x + sgn(x)*x^2 to get properly rounded result |
| .pred.rel "mutex",p7,p8 |
| { .mfi |
| nop.m 0 |
| (p7) fnma.d.s0 f8 = fNormX, fNormX, fNormX // If x<0 result ~ x-x^2 |
| nop.i 0 |
| } |
| { .mfb |
| nop.m 0 |
| (p8) fma.d.s0 f8 = fNormX, fNormX, fNormX // If x>0 result ~ x+x^2 |
| br.ret.sptk b0 // Exit if |x| < 2^-60 |
| } |
| ;; |
| |
| |
| SINH_POSSIBLE_OVERFLOW: |
| |
| // Here if fMAX_DBL_NORM_ARG < |x| < fMIN_DBL_OFLOW_ARG |
| // This cannot happen if input is a double, only if input higher precision. |
| // Overflow is a possibility, not a certainty. |
| |
| // Recompute result using status field 2 with user's rounding mode, |
| // and wre set. If result is larger than largest double, then we have |
| // overflow |
| |
| { .mfi |
| mov rGt_ln = 0x103ff // Exponent for largest dbl + 1 ulp |
| fsetc.s2 0x7F,0x42 // Get user's round mode, set wre |
| nop.i 0 |
| } |
| ;; |
| |
| { .mfi |
| setf.exp fGt_pln = rGt_ln // Create largest double + 1 ulp |
| fma.d.s2 fWre_urm_f8 = fS, fP, fS // Result with wre set |
| nop.i 0 |
| } |
| ;; |
| |
| { .mfi |
| nop.m 0 |
| fsetc.s2 0x7F,0x40 // Turn off wre in sf2 |
| nop.i 0 |
| } |
| ;; |
| |
| { .mfi |
| nop.m 0 |
| fcmp.ge.s1 p6, p0 = fWre_urm_f8, fGt_pln // Test for overflow |
| nop.i 0 |
| } |
| ;; |
| |
| { .mfb |
| nop.m 0 |
| nop.f 0 |
| (p6) br.cond.spnt SINH_CERTAIN_OVERFLOW // Branch if overflow |
| } |
| ;; |
| |
| { .mfb |
| nop.m 0 |
| fma.d.s0 f8 = fS, fP, fS |
| br.ret.sptk b0 // Exit if really no overflow |
| } |
| ;; |
| |
| SINH_CERTAIN_OVERFLOW: |
| { .mfi |
| sub rTmp = rExp_mask, r0, 1 |
| fcmp.lt.s1 p6, p7 = fNormX, f0 // Test for x < 0 |
| nop.i 0 |
| } |
| ;; |
| |
| { .mmf |
| alloc r32=ar.pfs,1,4,4,0 |
| setf.exp fTmp = rTmp |
| fmerge.s FR_X = f8,f8 |
| } |
| ;; |
| |
| { .mfi |
| mov GR_Parameter_TAG = 127 |
| (p6) fnma.d.s0 FR_RESULT = fTmp, fTmp, f0 // Set I,O and -INF result |
| nop.i 0 |
| } |
| { .mfb |
| nop.m 0 |
| (p7) fma.d.s0 FR_RESULT = fTmp, fTmp, f0 // Set I,O and +INF result |
| br.cond.sptk __libm_error_region |
| } |
| ;; |
| |
| // Here if x unorm |
| SINH_UNORM: |
| { .mfb |
| getf.exp rSignexp_x = fNormX // Must recompute if x unorm |
| fcmp.eq.s0 p6, p0 = f8, f0 // Set D flag |
| br.cond.sptk SINH_COMMON |
| } |
| ;; |
| |
| GLOBAL_IEEE754_END(sinh) |
| |
| |
| LOCAL_LIBM_ENTRY(__libm_error_region) |
| .prologue |
| { .mfi |
| add GR_Parameter_Y=-32,sp // Parameter 2 value |
| nop.f 0 |
| .save ar.pfs,GR_SAVE_PFS |
| mov GR_SAVE_PFS=ar.pfs // Save ar.pfs |
| } |
| { .mfi |
| .fframe 64 |
| add sp=-64,sp // Create new stack |
| nop.f 0 |
| mov GR_SAVE_GP=gp // Save gp |
| };; |
| { .mmi |
| stfd [GR_Parameter_Y] = FR_Y,16 // STORE Parameter 2 on stack |
| add GR_Parameter_X = 16,sp // Parameter 1 address |
| .save b0, GR_SAVE_B0 |
| mov GR_SAVE_B0=b0 // Save b0 |
| };; |
| .body |
| { .mib |
| stfd [GR_Parameter_X] = FR_X // STORE Parameter 1 on stack |
| add GR_Parameter_RESULT = 0,GR_Parameter_Y // Parameter 3 address |
| nop.b 0 |
| } |
| { .mib |
| stfd [GR_Parameter_Y] = FR_RESULT // STORE Parameter 3 on stack |
| add GR_Parameter_Y = -16,GR_Parameter_Y |
| br.call.sptk b0=__libm_error_support# // Call error handling function |
| };; |
| { .mmi |
| add GR_Parameter_RESULT = 48,sp |
| nop.m 0 |
| nop.i 0 |
| };; |
| { .mmi |
| ldfd f8 = [GR_Parameter_RESULT] // Get return result off stack |
| .restore sp |
| add sp = 64,sp // Restore stack pointer |
| mov b0 = GR_SAVE_B0 // Restore return address |
| };; |
| { .mib |
| mov gp = GR_SAVE_GP // Restore gp |
| mov ar.pfs = GR_SAVE_PFS // Restore ar.pfs |
| br.ret.sptk b0 // Return |
| };; |
| |
| LOCAL_LIBM_END(__libm_error_region) |
| .type __libm_error_support#,@function |
| .global __libm_error_support# |