| config IMX_HAVE_DMA_V1 | |
| bool | |
| config SOC_IMX1 | |
| bool | |
| select CPU_ARM920T | |
| select IMX_HAVE_DMA_V1 | |
| select IMX_HAVE_IOMUX_V1 | |
| select MXC_AVIC | |
| config SOC_IMX21 | |
| bool | |
| select CPU_ARM926T | |
| select ARCH_MXC_AUDMUX_V1 | |
| select IMX_HAVE_DMA_V1 | |
| select IMX_HAVE_IOMUX_V1 | |
| select MXC_AVIC | |
| config SOC_IMX25 | |
| bool | |
| select CPU_ARM926T | |
| select ARCH_MXC_AUDMUX_V2 | |
| select ARCH_MXC_IOMUX_V3 | |
| select MXC_AVIC | |
| config SOC_IMX27 | |
| bool | |
| select CPU_ARM926T | |
| select ARCH_MXC_AUDMUX_V1 | |
| select IMX_HAVE_DMA_V1 | |
| select IMX_HAVE_IOMUX_V1 | |
| select MXC_AVIC | |
| if ARCH_MX1 | |
| comment "MX1 platforms:" | |
| config MACH_MXLADS | |
| bool | |
| config ARCH_MX1ADS | |
| bool "MX1ADS platform" | |
| select MACH_MXLADS | |
| select IMX_HAVE_PLATFORM_IMX_I2C | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| help | |
| Say Y here if you are using Motorola MX1ADS/MXLADS boards | |
| config MACH_SCB9328 | |
| bool "Synertronixx scb9328" | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| help | |
| Say Y here if you are using a Synertronixx scb9328 board | |
| endif | |
| if ARCH_MX2 | |
| choice | |
| prompt "CPUs:" | |
| default MACH_MX21 | |
| config MACH_MX21 | |
| bool "i.MX21 support" | |
| help | |
| This enables support for Freescale's MX2 based i.MX21 processor. | |
| config MACH_MX27 | |
| bool "i.MX27 support" | |
| help | |
| This enables support for Freescale's MX2 based i.MX27 processor. | |
| endchoice | |
| endif | |
| if MACH_MX21 | |
| comment "MX21 platforms:" | |
| config MACH_MX21ADS | |
| bool "MX21ADS platform" | |
| select SOC_IMX21 | |
| select IMX_HAVE_PLATFORM_IMX_FB | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| select IMX_HAVE_PLATFORM_MXC_MMC | |
| select IMX_HAVE_PLATFORM_MXC_NAND | |
| help | |
| Include support for MX21ADS platform. This includes specific | |
| configurations for the board and its peripherals. | |
| endif | |
| if ARCH_MX25 | |
| comment "MX25 platforms:" | |
| config MACH_MX25_3DS | |
| bool "Support MX25PDK (3DS) Platform" | |
| select SOC_IMX25 | |
| select IMX_HAVE_PLATFORM_FSL_USB2_UDC | |
| select IMX_HAVE_PLATFORM_IMX2_WDT | |
| select IMX_HAVE_PLATFORM_IMXDI_RTC | |
| select IMX_HAVE_PLATFORM_IMX_FB | |
| select IMX_HAVE_PLATFORM_IMX_KEYPAD | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| select IMX_HAVE_PLATFORM_MXC_EHCI | |
| select IMX_HAVE_PLATFORM_MXC_NAND | |
| select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX | |
| config MACH_EUKREA_CPUIMX25 | |
| bool "Support Eukrea CPUIMX25 Platform" | |
| select SOC_IMX25 | |
| select IMX_HAVE_PLATFORM_FLEXCAN | |
| select IMX_HAVE_PLATFORM_FSL_USB2_UDC | |
| select IMX_HAVE_PLATFORM_IMXDI_RTC | |
| select IMX_HAVE_PLATFORM_IMX_FB | |
| select IMX_HAVE_PLATFORM_IMX_I2C | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| select IMX_HAVE_PLATFORM_MXC_EHCI | |
| select IMX_HAVE_PLATFORM_MXC_NAND | |
| select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX | |
| select MXC_ULPI if USB_ULPI | |
| choice | |
| prompt "Baseboard" | |
| depends on MACH_EUKREA_CPUIMX25 | |
| default MACH_EUKREA_MBIMXSD25_BASEBOARD | |
| config MACH_EUKREA_MBIMXSD25_BASEBOARD | |
| bool "Eukrea MBIMXSD development board" | |
| select IMX_HAVE_PLATFORM_IMX_SSI | |
| help | |
| This adds board specific devices that can be found on Eukrea's | |
| MBIMXSD evaluation board. | |
| endchoice | |
| endif | |
| if MACH_MX27 | |
| comment "MX27 platforms:" | |
| config MACH_MX27ADS | |
| bool "MX27ADS platform" | |
| select SOC_IMX27 | |
| select IMX_HAVE_PLATFORM_IMX_FB | |
| select IMX_HAVE_PLATFORM_IMX_I2C | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| select IMX_HAVE_PLATFORM_MXC_MMC | |
| select IMX_HAVE_PLATFORM_MXC_NAND | |
| select IMX_HAVE_PLATFORM_MXC_W1 | |
| help | |
| Include support for MX27ADS platform. This includes specific | |
| configurations for the board and its peripherals. | |
| config MACH_PCM038 | |
| bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" | |
| select SOC_IMX27 | |
| select IMX_HAVE_PLATFORM_IMX2_WDT | |
| select IMX_HAVE_PLATFORM_IMX_I2C | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| select IMX_HAVE_PLATFORM_MXC_EHCI | |
| select IMX_HAVE_PLATFORM_MXC_NAND | |
| select IMX_HAVE_PLATFORM_MXC_W1 | |
| select IMX_HAVE_PLATFORM_SPI_IMX | |
| select MXC_ULPI if USB_ULPI | |
| help | |
| Include support for phyCORE-i.MX27 (aka pcm038) platform. This | |
| includes specific configurations for the module and its peripherals. | |
| choice | |
| prompt "Baseboard" | |
| depends on MACH_PCM038 | |
| default MACH_PCM970_BASEBOARD | |
| config MACH_PCM970_BASEBOARD | |
| bool "PHYTEC PCM970 development board" | |
| select IMX_HAVE_PLATFORM_IMX_FB | |
| select IMX_HAVE_PLATFORM_MXC_MMC | |
| help | |
| This adds board specific devices that can be found on Phytec's | |
| PCM970 evaluation board. | |
| endchoice | |
| config MACH_CPUIMX27 | |
| bool "Eukrea CPUIMX27 module" | |
| select SOC_IMX27 | |
| select IMX_HAVE_PLATFORM_FSL_USB2_UDC | |
| select IMX_HAVE_PLATFORM_IMX2_WDT | |
| select IMX_HAVE_PLATFORM_IMX_I2C | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| select IMX_HAVE_PLATFORM_MXC_EHCI | |
| select IMX_HAVE_PLATFORM_MXC_NAND | |
| select IMX_HAVE_PLATFORM_MXC_W1 | |
| select MXC_ULPI if USB_ULPI | |
| help | |
| Include support for Eukrea CPUIMX27 platform. This includes | |
| specific configurations for the module and its peripherals. | |
| config MACH_EUKREA_CPUIMX27_USESDHC2 | |
| bool "CPUIMX27 integrates SDHC2 module" | |
| depends on MACH_CPUIMX27 | |
| select IMX_HAVE_PLATFORM_MXC_MMC | |
| help | |
| This adds support for the internal SDHC2 used on CPUIMX27 | |
| for wifi or eMMC. | |
| config MACH_EUKREA_CPUIMX27_USEUART4 | |
| bool "CPUIMX27 integrates UART4 module" | |
| depends on MACH_CPUIMX27 | |
| help | |
| This adds support for the internal UART4 used on CPUIMX27 | |
| for bluetooth. | |
| choice | |
| prompt "Baseboard" | |
| depends on MACH_CPUIMX27 | |
| default MACH_EUKREA_MBIMX27_BASEBOARD | |
| config MACH_EUKREA_MBIMX27_BASEBOARD | |
| bool "Eukrea MBIMX27 development board" | |
| select IMX_HAVE_PLATFORM_IMX_FB | |
| select IMX_HAVE_PLATFORM_IMX_KEYPAD | |
| select IMX_HAVE_PLATFORM_IMX_SSI | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| select IMX_HAVE_PLATFORM_MXC_MMC | |
| select IMX_HAVE_PLATFORM_SPI_IMX | |
| help | |
| This adds board specific devices that can be found on Eukrea's | |
| MBIMX27 evaluation board. | |
| endchoice | |
| config MACH_MX27_3DS | |
| bool "MX27PDK platform" | |
| select SOC_IMX27 | |
| select IMX_HAVE_PLATFORM_FSL_USB2_UDC | |
| select IMX_HAVE_PLATFORM_IMX2_WDT | |
| select IMX_HAVE_PLATFORM_IMX_KEYPAD | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| select IMX_HAVE_PLATFORM_MXC_EHCI | |
| select IMX_HAVE_PLATFORM_MXC_MMC | |
| select IMX_HAVE_PLATFORM_SPI_IMX | |
| select MXC_DEBUG_BOARD | |
| select MXC_ULPI if USB_ULPI | |
| help | |
| Include support for MX27PDK platform. This includes specific | |
| configurations for the board and its peripherals. | |
| config MACH_IMX27_VISSTRIM_M10 | |
| bool "Vista Silicon i.MX27 Visstrim_m10" | |
| select SOC_IMX27 | |
| select IMX_HAVE_PLATFORM_IMX_I2C | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| select IMX_HAVE_PLATFORM_MXC_MMC | |
| select IMX_HAVE_PLATFORM_MXC_EHCI | |
| help | |
| Include support for Visstrim_m10 platform and its different variants. | |
| This includes specific configurations for the board and its | |
| peripherals. | |
| config MACH_IMX27LITE | |
| bool "LogicPD MX27 LITEKIT platform" | |
| select SOC_IMX27 | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| help | |
| Include support for MX27 LITEKIT platform. This includes specific | |
| configurations for the board and its peripherals. | |
| config MACH_PCA100 | |
| bool "Phytec phyCARD-s (pca100)" | |
| select SOC_IMX27 | |
| select IMX_HAVE_PLATFORM_FSL_USB2_UDC | |
| select IMX_HAVE_PLATFORM_IMX2_WDT | |
| select IMX_HAVE_PLATFORM_IMX_FB | |
| select IMX_HAVE_PLATFORM_IMX_I2C | |
| select IMX_HAVE_PLATFORM_IMX_SSI | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| select IMX_HAVE_PLATFORM_MXC_EHCI | |
| select IMX_HAVE_PLATFORM_MXC_MMC | |
| select IMX_HAVE_PLATFORM_MXC_NAND | |
| select IMX_HAVE_PLATFORM_MXC_W1 | |
| select IMX_HAVE_PLATFORM_SPI_IMX | |
| select MXC_ULPI if USB_ULPI | |
| help | |
| Include support for phyCARD-s (aka pca100) platform. This | |
| includes specific configurations for the module and its peripherals. | |
| config MACH_MXT_TD60 | |
| bool "Maxtrack i-MXT TD60" | |
| select SOC_IMX27 | |
| select IMX_HAVE_PLATFORM_IMX_FB | |
| select IMX_HAVE_PLATFORM_IMX_I2C | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| select IMX_HAVE_PLATFORM_MXC_MMC | |
| select IMX_HAVE_PLATFORM_MXC_NAND | |
| help | |
| Include support for i-MXT (aka td60) platform. This | |
| includes specific configurations for the module and its peripherals. | |
| endif |