| if ARCH_MX5 | |
| # ARCH_MX51 and ARCH_MX50 are left for compatibility | |
| config ARCH_MX50 | |
| bool | |
| config ARCH_MX51 | |
| bool | |
| config ARCH_MX53 | |
| bool | |
| config SOC_IMX50 | |
| bool | |
| select MXC_TZIC | |
| select ARCH_MXC_IOMUX_V3 | |
| select ARCH_MXC_AUDMUX_V2 | |
| select ARCH_HAS_CPUFREQ | |
| select ARCH_MX50 | |
| config SOC_IMX51 | |
| bool | |
| select MXC_TZIC | |
| select ARCH_MXC_IOMUX_V3 | |
| select ARCH_MXC_AUDMUX_V2 | |
| select ARCH_HAS_CPUFREQ | |
| select ARCH_MX51 | |
| config SOC_IMX53 | |
| bool | |
| select MXC_TZIC | |
| select ARCH_MXC_IOMUX_V3 | |
| select ARCH_MX53 | |
| comment "MX5 platforms:" | |
| config MACH_MX51_BABBAGE | |
| bool "Support MX51 BABBAGE platforms" | |
| select SOC_IMX51 | |
| select IMX_HAVE_PLATFORM_IMX2_WDT | |
| select IMX_HAVE_PLATFORM_IMX_I2C | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX | |
| select IMX_HAVE_PLATFORM_SPI_IMX | |
| help | |
| Include support for MX51 Babbage platform, also known as MX51EVK in | |
| u-boot. This includes specific configurations for the board and its | |
| peripherals. | |
| config MACH_MX51_3DS | |
| bool "Support MX51PDK (3DS)" | |
| select SOC_IMX51 | |
| select IMX_HAVE_PLATFORM_IMX_KEYPAD | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX | |
| select IMX_HAVE_PLATFORM_SPI_IMX | |
| select MXC_DEBUG_BOARD | |
| help | |
| Include support for MX51PDK (3DS) platform. This includes specific | |
| configurations for the board and its peripherals. | |
| config MACH_EUKREA_CPUIMX51 | |
| bool "Support Eukrea CPUIMX51 module" | |
| select SOC_IMX51 | |
| select IMX_HAVE_PLATFORM_IMX_I2C | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| select IMX_HAVE_PLATFORM_MXC_NAND | |
| select IMX_HAVE_PLATFORM_SPI_IMX | |
| help | |
| Include support for Eukrea CPUIMX51 platform. This includes | |
| specific configurations for the module and its peripherals. | |
| choice | |
| prompt "Baseboard" | |
| depends on MACH_EUKREA_CPUIMX51 | |
| default MACH_EUKREA_MBIMX51_BASEBOARD | |
| config MACH_EUKREA_MBIMX51_BASEBOARD | |
| prompt "Eukrea MBIMX51 development board" | |
| bool | |
| select IMX_HAVE_PLATFORM_IMX_KEYPAD | |
| select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX | |
| help | |
| This adds board specific devices that can be found on Eukrea's | |
| MBIMX51 evaluation board. | |
| endchoice | |
| config MACH_EUKREA_CPUIMX51SD | |
| bool "Support Eukrea CPUIMX51SD module" | |
| select SOC_IMX51 | |
| select IMX_HAVE_PLATFORM_IMX_I2C | |
| select IMX_HAVE_PLATFORM_SPI_IMX | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| select IMX_HAVE_PLATFORM_MXC_NAND | |
| help | |
| Include support for Eukrea CPUIMX51SD platform. This includes | |
| specific configurations for the module and its peripherals. | |
| choice | |
| prompt "Baseboard" | |
| depends on MACH_EUKREA_CPUIMX51SD | |
| default MACH_EUKREA_MBIMXSD51_BASEBOARD | |
| config MACH_EUKREA_MBIMXSD51_BASEBOARD | |
| prompt "Eukrea MBIMXSD development board" | |
| bool | |
| select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX | |
| help | |
| This adds board specific devices that can be found on Eukrea's | |
| MBIMXSD evaluation board. | |
| endchoice | |
| config MACH_MX51_EFIKAMX | |
| bool "Support MX51 Genesi Efika MX nettop" | |
| select SOC_IMX51 | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX | |
| select IMX_HAVE_PLATFORM_SPI_IMX | |
| help | |
| Include support for Genesi Efika MX nettop. This includes specific | |
| configurations for the board and its peripherals. | |
| config MACH_MX53_EVK | |
| bool "Support MX53 EVK platforms" | |
| select SOC_IMX53 | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| select IMX_HAVE_PLATFORM_IMX_I2C | |
| select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX | |
| select IMX_HAVE_PLATFORM_SPI_IMX | |
| help | |
| Include support for MX53 EVK platform. This includes specific | |
| configurations for the board and its peripherals. | |
| config MACH_MX53_SMD | |
| bool "Support MX53 SMD platforms" | |
| select SOC_IMX53 | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| help | |
| Include support for MX53 SMD platform. This includes specific | |
| configurations for the board and its peripherals. | |
| config MACH_MX53_LOCO | |
| bool "Support MX53 LOCO platforms" | |
| select SOC_IMX53 | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| help | |
| Include support for MX53 LOCO platform. This includes specific | |
| configurations for the board and its peripherals. | |
| config MACH_MX50_RDP | |
| bool "Support MX50 reference design platform" | |
| depends on BROKEN | |
| select SOC_IMX50 | |
| select IMX_HAVE_PLATFORM_IMX_I2C | |
| select IMX_HAVE_PLATFORM_IMX_UART | |
| select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX | |
| select IMX_HAVE_PLATFORM_SPI_IMX | |
| help | |
| Include support for MX50 reference design platform (RDP) board. This | |
| includes specific configurations for the board and its peripherals. | |
| endif |