| if ARCH_SHMOBILE | |
| comment "SH-Mobile System Type" | |
| config ARCH_SH7367 | |
| bool "SH-Mobile G3 (SH7367)" | |
| select CPU_V6 | |
| select SH_CLK_CPG | |
| select ARCH_WANT_OPTIONAL_GPIOLIB | |
| config ARCH_SH7377 | |
| bool "SH-Mobile G4 (SH7377)" | |
| select CPU_V7 | |
| select SH_CLK_CPG | |
| select ARCH_WANT_OPTIONAL_GPIOLIB | |
| config ARCH_SH7372 | |
| bool "SH-Mobile AP4 (SH7372)" | |
| select CPU_V7 | |
| select SH_CLK_CPG | |
| select ARCH_WANT_OPTIONAL_GPIOLIB | |
| config ARCH_SH73A0 | |
| bool "SH-Mobile AG5 (R8A73A00)" | |
| select CPU_V7 | |
| select SH_CLK_CPG | |
| select ARCH_WANT_OPTIONAL_GPIOLIB | |
| select ARM_GIC | |
| comment "SH-Mobile Board Type" | |
| config MACH_G3EVM | |
| bool "G3EVM board" | |
| depends on ARCH_SH7367 | |
| select ARCH_REQUIRE_GPIOLIB | |
| config MACH_G4EVM | |
| bool "G4EVM board" | |
| depends on ARCH_SH7377 | |
| select ARCH_REQUIRE_GPIOLIB | |
| config MACH_AP4EVB | |
| bool "AP4EVB board" | |
| depends on ARCH_SH7372 | |
| select ARCH_REQUIRE_GPIOLIB | |
| select SH_LCD_MIPI_DSI | |
| choice | |
| prompt "AP4EVB LCD panel selection" | |
| default AP4EVB_QHD | |
| depends on MACH_AP4EVB | |
| config AP4EVB_QHD | |
| bool "MIPI-DSI QHD (960x540)" | |
| config AP4EVB_WVGA | |
| bool "Parallel WVGA (800x480)" | |
| endchoice | |
| config MACH_AG5EVM | |
| bool "AG5EVM board" | |
| select ARCH_REQUIRE_GPIOLIB | |
| select SH_LCD_MIPI_DSI | |
| depends on ARCH_SH73A0 | |
| config MACH_MACKEREL | |
| bool "mackerel board" | |
| depends on ARCH_SH7372 | |
| select ARCH_REQUIRE_GPIOLIB | |
| comment "SH-Mobile System Configuration" | |
| menu "Memory configuration" | |
| config MEMORY_START | |
| hex "Physical memory start address" | |
| default "0x50000000" if MACH_G3EVM | |
| default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \ | |
| MACH_MACKEREL | |
| default "0x00000000" | |
| ---help--- | |
| Tweak this only when porting to a new machine which does not | |
| already have a defconfig. Changing it from the known correct | |
| value on any of the known systems will only lead to disaster. | |
| config MEMORY_SIZE | |
| hex "Physical memory size" | |
| default "0x08000000" if MACH_G3EVM | |
| default "0x08000000" if MACH_G4EVM | |
| default "0x20000000" if MACH_AG5EVM | |
| default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL | |
| default "0x04000000" | |
| help | |
| This sets the default memory size assumed by your kernel. It can | |
| be overridden as normal by the 'mem=' argument on the kernel command | |
| line. | |
| endmenu | |
| menu "Timer and clock configuration" | |
| config SHMOBILE_TIMER_HZ | |
| int "Kernel HZ (jiffies per second)" | |
| range 32 1024 | |
| default "128" | |
| help | |
| Allows the configuration of the timer frequency. It is customary | |
| to have the timer interrupt run at 1000 Hz or 100 Hz, but in the | |
| case of low timer frequencies other values may be more suitable. | |
| SH-Mobile systems using a 32768 Hz RCLK for clock events may want | |
| to select a HZ value such as 128 that can evenly divide RCLK. | |
| A HZ value that does not divide evenly may cause timer drift. | |
| config SH_TIMER_CMT | |
| bool "CMT timer driver" | |
| default y | |
| help | |
| This enables build of the CMT timer driver. | |
| config SH_TIMER_TMU | |
| bool "TMU timer driver" | |
| default y | |
| help | |
| This enables build of the TMU timer driver. | |
| endmenu | |
| config SH_CLK_CPG | |
| bool | |
| source "drivers/sh/Kconfig" | |
| endif |