| if ARCH_OMAP | |
| menu "TI OMAP Common Features" | |
| config ARCH_OMAP_OTG | |
| bool | |
| choice | |
| prompt "OMAP System Type" | |
| default ARCH_OMAP2PLUS | |
| config ARCH_OMAP1 | |
| bool "TI OMAP1" | |
| select CLKDEV_LOOKUP | |
| help | |
| "Systems based on omap7xx, omap15xx or omap16xx" | |
| config ARCH_OMAP2PLUS | |
| bool "TI OMAP2/3/4" | |
| select CLKDEV_LOOKUP | |
| select OMAP_DM_TIMER | |
| help | |
| "Systems based on OMAP2, OMAP3 or OMAP4" | |
| endchoice | |
| comment "OMAP Feature Selections" | |
| config OMAP_DEBUG_DEVICES | |
| bool | |
| help | |
| For debug cards on TI reference boards. | |
| config OMAP_DEBUG_LEDS | |
| bool | |
| depends on OMAP_DEBUG_DEVICES | |
| default y if LEDS_CLASS | |
| config OMAP_SMARTREFLEX | |
| bool "SmartReflex support" | |
| depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM | |
| help | |
| Say Y if you want to enable SmartReflex. | |
| SmartReflex can perform continuous dynamic voltage | |
| scaling around the nominal operating point voltage | |
| according to silicon characteristics and operating | |
| conditions. Enabling SmartReflex reduces power | |
| consumption. | |
| Please note, that by default SmartReflex is only | |
| initialized. To enable the automatic voltage | |
| compensation for vdd mpu and vdd core from user space, | |
| user must write 1 to | |
| /debug/voltage/vdd_<X>/smartreflex/autocomp, | |
| where X is mpu or core for OMAP3. | |
| Optionallly autocompensation can be enabled in the kernel | |
| by default during system init via the enable_on_init flag | |
| which an be passed as platform data to the smartreflex driver. | |
| config OMAP_SMARTREFLEX_CLASS3 | |
| bool "Class 3 mode of Smartreflex Implementation" | |
| depends on OMAP_SMARTREFLEX && TWL4030_CORE | |
| help | |
| Say Y to enable Class 3 implementation of Smartreflex | |
| Class 3 implementation of Smartreflex employs continuous hardware | |
| voltage calibration. | |
| config OMAP_RESET_CLOCKS | |
| bool "Reset unused clocks during boot" | |
| depends on ARCH_OMAP | |
| help | |
| Say Y if you want to reset unused clocks during boot. | |
| This option saves power, but assumes all drivers are | |
| using the clock framework. Broken drivers that do not | |
| yet use clock framework may not work with this option. | |
| If you are booting from another operating system, you | |
| probably do not want this option enabled until your | |
| device drivers work properly. | |
| config OMAP_MUX | |
| bool "OMAP multiplexing support" | |
| depends on ARCH_OMAP | |
| default y | |
| help | |
| Pin multiplexing support for OMAP boards. If your bootloader | |
| sets the multiplexing correctly, say N. Otherwise, or if unsure, | |
| say Y. | |
| config OMAP_MUX_DEBUG | |
| bool "Multiplexing debug output" | |
| depends on OMAP_MUX | |
| help | |
| Makes the multiplexing functions print out a lot of debug info. | |
| This is useful if you want to find out the correct values of the | |
| multiplexing registers. | |
| config OMAP_MUX_WARNINGS | |
| bool "Warn about pins the bootloader didn't set up" | |
| depends on OMAP_MUX | |
| default y | |
| help | |
| Choose Y here to warn whenever driver initialization logic needs | |
| to change the pin multiplexing setup. When there are no warnings | |
| printed, it's safe to deselect OMAP_MUX for your product. | |
| config OMAP_MCBSP | |
| bool "McBSP support" | |
| depends on ARCH_OMAP | |
| default y | |
| help | |
| Say Y here if you want support for the OMAP Multichannel | |
| Buffered Serial Port. | |
| config OMAP_MBOX_FWK | |
| tristate "Mailbox framework support" | |
| depends on ARCH_OMAP | |
| help | |
| Say Y here if you want to use OMAP Mailbox framework support for | |
| DSP, IVA1.0 and IVA2 in OMAP1/2/3. | |
| config OMAP_MBOX_KFIFO_SIZE | |
| int "Mailbox kfifo default buffer size (bytes)" | |
| depends on OMAP_MBOX_FWK | |
| default 256 | |
| help | |
| Specify the default size of mailbox's kfifo buffers (bytes). | |
| This can also be changed at runtime (via the mbox_kfifo_size | |
| module parameter). | |
| config OMAP_IOMMU | |
| tristate | |
| config OMAP_IOMMU_DEBUG | |
| tristate "Export OMAP IOMMU internals in DebugFS" | |
| depends on OMAP_IOMMU && DEBUG_FS | |
| help | |
| Select this to see extensive information about | |
| the internal state of OMAP IOMMU in debugfs. | |
| Say N unless you know you need this. | |
| config OMAP_IOMMU_IVA2 | |
| bool | |
| config OMAP_MPU_TIMER | |
| bool "Use mpu timer" | |
| depends on ARCH_OMAP1 | |
| help | |
| Select this option if you want to use the OMAP mpu timer. This | |
| timer provides more intra-tick resolution than the 32KHz timer, | |
| but consumes more power. | |
| config OMAP_32K_TIMER | |
| bool "Use 32KHz timer" | |
| depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS | |
| default y if (ARCH_OMAP16XX || ARCH_OMAP2PLUS) | |
| help | |
| Select this option if you want to enable the OMAP 32KHz timer. | |
| This timer saves power compared to the OMAP_MPU_TIMER, and has | |
| support for no tick during idle. The 32KHz timer provides less | |
| intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is | |
| currently only available for OMAP16XX, 24XX, 34XX and OMAP4. | |
| config OMAP3_L2_AUX_SECURE_SAVE_RESTORE | |
| bool "OMAP3 HS/EMU save and restore for L2 AUX control register" | |
| depends on ARCH_OMAP3 && PM | |
| default n | |
| help | |
| Without this option, L2 Auxiliary control register contents are | |
| lost during off-mode entry on HS/EMU devices. This feature | |
| requires support from PPA / boot-loader in HS/EMU devices, which | |
| currently does not exist by default. | |
| config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID | |
| int "Service ID for the support routine to set L2 AUX control" | |
| depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE | |
| default 43 | |
| help | |
| PPA routine service ID for setting L2 auxiliary control register. | |
| config OMAP_32K_TIMER_HZ | |
| int "Kernel internal timer frequency for 32KHz timer" | |
| range 32 1024 | |
| depends on OMAP_32K_TIMER | |
| default "128" | |
| help | |
| Kernel internal timer frequency should be a divisor of 32768, | |
| such as 64 or 128. | |
| config OMAP_DM_TIMER | |
| bool "Use dual-mode timer" | |
| depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS | |
| help | |
| Select this option if you want to use OMAP Dual-Mode timers. | |
| config OMAP_SERIAL_WAKE | |
| bool "Enable wake-up events for serial ports" | |
| depends on ARCH_OMAP1 && OMAP_MUX | |
| default y | |
| help | |
| Select this option if you want to have your system wake up | |
| to data on the serial RX line. This allows you to wake the | |
| system from serial console. | |
| choice | |
| prompt "OMAP PM layer selection" | |
| depends on ARCH_OMAP | |
| default OMAP_PM_NOOP | |
| config OMAP_PM_NONE | |
| bool "No PM layer" | |
| config OMAP_PM_NOOP | |
| bool "No-op/debug PM layer" | |
| endchoice | |
| endmenu | |
| endif |