blob: 9cc43495bea2051292f1952b7cc0d683cbf7c915 [file] [log] [blame]
/*
* Copyright (C) ST-Ericsson SA 2007-2010
* Author: Per Friden <per.friden@stericsson.com> for ST-Ericsson SA
* Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson SA
* License terms: GNU General Public License (GPL) version 2
*/
#ifndef STE_DMA40_LL_H
#define STE_DMA40_LL_H
#define D40_DREG_PCBASE 0x400
#define D40_DREG_PCDELTA (8 * 4)
#define D40_LLI_ALIGN 16 /* LLI alignment must be 16 bytes. */
#define D40_LCPA_CHAN_SIZE 32
#define D40_LCPA_CHAN_DST_DELTA 16
#define D40_TYPE_TO_GROUP(type) (type / 16)
#define D40_TYPE_TO_EVENT(type) (type % 16)
/* Most bits of the CFG register are the same in log as in phy mode */
#define D40_SREG_CFG_MST_POS 15
#define D40_SREG_CFG_TIM_POS 14
#define D40_SREG_CFG_EIM_POS 13
#define D40_SREG_CFG_LOG_INCR_POS 12
#define D40_SREG_CFG_PHY_PEN_POS 12
#define D40_SREG_CFG_PSIZE_POS 10
#define D40_SREG_CFG_ESIZE_POS 8
#define D40_SREG_CFG_PRI_POS 7
#define D40_SREG_CFG_LBE_POS 6
#define D40_SREG_CFG_LOG_GIM_POS 5
#define D40_SREG_CFG_LOG_MFU_POS 4
#define D40_SREG_CFG_PHY_TM_POS 4
#define D40_SREG_CFG_PHY_EVTL_POS 0
/* Standard channel parameters - basic mode (element register) */
#define D40_SREG_ELEM_PHY_ECNT_POS 16
#define D40_SREG_ELEM_PHY_EIDX_POS 0
#define D40_SREG_ELEM_PHY_ECNT_MASK (0xFFFF << D40_SREG_ELEM_PHY_ECNT_POS)
/* Standard channel parameters - basic mode (Link register) */
#define D40_SREG_LNK_PHY_TCP_POS 0
#define D40_SREG_LNK_PHY_LMP_POS 1
#define D40_SREG_LNK_PHY_PRE_POS 2
/*
* Source destination link address. Contains the
* 29-bit byte word aligned address of the reload area.
*/
#define D40_SREG_LNK_PHYS_LNK_MASK 0xFFFFFFF8UL
/* Standard basic channel logical mode */
/* Element register */
#define D40_SREG_ELEM_LOG_ECNT_POS 16
#define D40_SREG_ELEM_LOG_LIDX_POS 8
#define D40_SREG_ELEM_LOG_LOS_POS 1
#define D40_SREG_ELEM_LOG_TCP_POS 0
#define D40_SREG_ELEM_LOG_LIDX_MASK (0xFF << D40_SREG_ELEM_LOG_LIDX_POS)
/* Link register */
#define D40_DEACTIVATE_EVENTLINE 0x0
#define D40_ACTIVATE_EVENTLINE 0x1
#define D40_EVENTLINE_POS(i) (2 * i)
#define D40_EVENTLINE_MASK(i) (0x3 << D40_EVENTLINE_POS(i))
/* Standard basic channel logical params in memory */
/* LCSP0 */
#define D40_MEM_LCSP0_ECNT_POS 16
#define D40_MEM_LCSP0_SPTR_POS 0
#define D40_MEM_LCSP0_ECNT_MASK (0xFFFF << D40_MEM_LCSP0_ECNT_POS)
#define D40_MEM_LCSP0_SPTR_MASK (0xFFFF << D40_MEM_LCSP0_SPTR_POS)
/* LCSP1 */
#define D40_MEM_LCSP1_SPTR_POS 16
#define D40_MEM_LCSP1_SCFG_MST_POS 15
#define D40_MEM_LCSP1_SCFG_TIM_POS 14
#define D40_MEM_LCSP1_SCFG_EIM_POS 13
#define D40_MEM_LCSP1_SCFG_INCR_POS 12
#define D40_MEM_LCSP1_SCFG_PSIZE_POS 10
#define D40_MEM_LCSP1_SCFG_ESIZE_POS 8
#define D40_MEM_LCSP1_SLOS_POS 1
#define D40_MEM_LCSP1_STCP_POS 0
#define D40_MEM_LCSP1_SPTR_MASK (0xFFFF << D40_MEM_LCSP1_SPTR_POS)
#define D40_MEM_LCSP1_SCFG_TIM_MASK (0x1 << D40_MEM_LCSP1_SCFG_TIM_POS)
#define D40_MEM_LCSP1_SCFG_INCR_MASK (0x1 << D40_MEM_LCSP1_SCFG_INCR_POS)
#define D40_MEM_LCSP1_SCFG_PSIZE_MASK (0x3 << D40_MEM_LCSP1_SCFG_PSIZE_POS)
#define D40_MEM_LCSP1_SLOS_MASK (0x7F << D40_MEM_LCSP1_SLOS_POS)
#define D40_MEM_LCSP1_STCP_MASK (0x1 << D40_MEM_LCSP1_STCP_POS)
/* LCSP2 */
#define D40_MEM_LCSP2_ECNT_POS 16
#define D40_MEM_LCSP2_ECNT_MASK (0xFFFF << D40_MEM_LCSP2_ECNT_POS)
/* LCSP3 */
#define D40_MEM_LCSP3_DCFG_MST_POS 15
#define D40_MEM_LCSP3_DCFG_TIM_POS 14
#define D40_MEM_LCSP3_DCFG_EIM_POS 13
#define D40_MEM_LCSP3_DCFG_INCR_POS 12
#define D40_MEM_LCSP3_DCFG_PSIZE_POS 10
#define D40_MEM_LCSP3_DCFG_ESIZE_POS 8
#define D40_MEM_LCSP3_DLOS_POS 1
#define D40_MEM_LCSP3_DTCP_POS 0
#define D40_MEM_LCSP3_DLOS_MASK (0x7F << D40_MEM_LCSP3_DLOS_POS)
#define D40_MEM_LCSP3_DTCP_MASK (0x1 << D40_MEM_LCSP3_DTCP_POS)
/* Standard channel parameter register offsets */
#define D40_CHAN_REG_SSCFG 0x00
#define D40_CHAN_REG_SSELT 0x04
#define D40_CHAN_REG_SSPTR 0x08
#define D40_CHAN_REG_SSLNK 0x0C
#define D40_CHAN_REG_SDCFG 0x10
#define D40_CHAN_REG_SDELT 0x14
#define D40_CHAN_REG_SDPTR 0x18
#define D40_CHAN_REG_SDLNK 0x1C
/* DMA Register Offsets */
#define D40_DREG_GCC 0x000
#define D40_DREG_PRTYP 0x004
#define D40_DREG_PRSME 0x008
#define D40_DREG_PRSMO 0x00C
#define D40_DREG_PRMSE 0x010
#define D40_DREG_PRMSO 0x014
#define D40_DREG_PRMOE 0x018
#define D40_DREG_PRMOO 0x01C
#define D40_DREG_PRMO_PCHAN_BASIC 0x1
#define D40_DREG_PRMO_PCHAN_MODULO 0x2
#define D40_DREG_PRMO_PCHAN_DOUBLE_DST 0x3
#define D40_DREG_PRMO_LCHAN_SRC_PHY_DST_LOG 0x1
#define D40_DREG_PRMO_LCHAN_SRC_LOG_DST_PHY 0x2
#define D40_DREG_PRMO_LCHAN_SRC_LOG_DST_LOG 0x3
#define D40_DREG_LCPA 0x020
#define D40_DREG_LCLA 0x024
#define D40_DREG_ACTIVE 0x050
#define D40_DREG_ACTIVO 0x054
#define D40_DREG_FSEB1 0x058
#define D40_DREG_FSEB2 0x05C
#define D40_DREG_PCMIS 0x060
#define D40_DREG_PCICR 0x064
#define D40_DREG_PCTIS 0x068
#define D40_DREG_PCEIS 0x06C
#define D40_DREG_LCMIS0 0x080
#define D40_DREG_LCMIS1 0x084
#define D40_DREG_LCMIS2 0x088
#define D40_DREG_LCMIS3 0x08C
#define D40_DREG_LCICR0 0x090
#define D40_DREG_LCICR1 0x094
#define D40_DREG_LCICR2 0x098
#define D40_DREG_LCICR3 0x09C
#define D40_DREG_LCTIS0 0x0A0
#define D40_DREG_LCTIS1 0x0A4
#define D40_DREG_LCTIS2 0x0A8
#define D40_DREG_LCTIS3 0x0AC
#define D40_DREG_LCEIS0 0x0B0
#define D40_DREG_LCEIS1 0x0B4
#define D40_DREG_LCEIS2 0x0B8
#define D40_DREG_LCEIS3 0x0BC
#define D40_DREG_STFU 0xFC8
#define D40_DREG_ICFG 0xFCC
#define D40_DREG_PERIPHID0 0xFE0
#define D40_DREG_PERIPHID1 0xFE4
#define D40_DREG_PERIPHID2 0xFE8
#define D40_DREG_PERIPHID2_REV_POS 4
#define D40_DREG_PERIPHID2_REV_MASK (0xf << D40_DREG_PERIPHID2_REV_POS)
#define D40_DREG_PERIPHID2_DESIGNER_MASK 0xf
#define D40_DREG_PERIPHID3 0xFEC
#define D40_DREG_CELLID0 0xFF0
#define D40_DREG_CELLID1 0xFF4
#define D40_DREG_CELLID2 0xFF8
#define D40_DREG_CELLID3 0xFFC
/* LLI related structures */
/**
* struct d40_phy_lli - The basic configration register for each physical
* channel.
*
* @reg_cfg: The configuration register.
* @reg_elt: The element register.
* @reg_ptr: The pointer register.
* @reg_lnk: The link register.
*
* These registers are set up for both physical and logical transfers
* Note that the bit in each register means differently in logical and
* physical(standard) mode.
*
* This struct must be 16 bytes aligned, and only contain physical registers
* since it will be directly accessed by the DMA.
*/
struct d40_phy_lli {
u32 reg_cfg;
u32 reg_elt;
u32 reg_ptr;
u32 reg_lnk;
};
/**
* struct d40_phy_lli_bidir - struct for a transfer.
*
* @src: Register settings for src channel.
* @dst: Register settings for dst channel.
*
* All DMA transfers have a source and a destination.
*/
struct d40_phy_lli_bidir {
struct d40_phy_lli *src;
struct d40_phy_lli *dst;
};
/**
* struct d40_log_lli - logical lli configuration
*
* @lcsp02: Either maps to register lcsp0 if src or lcsp2 if dst.
* @lcsp13: Either maps to register lcsp1 if src or lcsp3 if dst.
*
* This struct must be 8 bytes aligned since it will be accessed directy by
* the DMA. Never add any none hw mapped registers to this struct.
*/
struct d40_log_lli {
u32 lcsp02;
u32 lcsp13;
};
/**
* struct d40_log_lli_bidir - For both src and dst
*
* @src: pointer to src lli configuration.
* @dst: pointer to dst lli configuration.
*
* You always have a src and a dst when doing DMA transfers.
*/
struct d40_log_lli_bidir {
struct d40_log_lli *src;
struct d40_log_lli *dst;
};
/**
* struct d40_log_lli_full - LCPA layout
*
* @lcsp0: Logical Channel Standard Param 0 - Src.
* @lcsp1: Logical Channel Standard Param 1 - Src.
* @lcsp2: Logical Channel Standard Param 2 - Dst.
* @lcsp3: Logical Channel Standard Param 3 - Dst.
*
* This struct maps to LCPA physical memory layout. Must map to
* the hw.
*/
struct d40_log_lli_full {
u32 lcsp0;
u32 lcsp1;
u32 lcsp2;
u32 lcsp3;
};
/**
* struct d40_def_lcsp - Default LCSP1 and LCSP3 settings
*
* @lcsp3: The default configuration for dst.
* @lcsp1: The default configuration for src.
*/
struct d40_def_lcsp {
u32 lcsp3;
u32 lcsp1;
};
/* Physical channels */
void d40_phy_cfg(struct stedma40_chan_cfg *cfg,
u32 *src_cfg,
u32 *dst_cfg,
bool is_log);
void d40_log_cfg(struct stedma40_chan_cfg *cfg,
u32 *lcsp1,
u32 *lcsp2);
int d40_phy_sg_to_lli(struct scatterlist *sg,
int sg_len,
dma_addr_t target,
struct d40_phy_lli *lli,
dma_addr_t lli_phys,
u32 reg_cfg,
u32 data_width1,
u32 data_width2,
int psize);
struct d40_phy_lli *d40_phy_buf_to_lli(struct d40_phy_lli *lli,
dma_addr_t data,
u32 data_size,
int psize,
dma_addr_t next_lli,
u32 reg_cfg,
bool term_int,
u32 data_width1,
u32 data_width2,
bool is_device);
void d40_phy_lli_write(void __iomem *virtbase,
u32 phy_chan_num,
struct d40_phy_lli *lli_dst,
struct d40_phy_lli *lli_src);
/* Logical channels */
struct d40_log_lli *d40_log_buf_to_lli(struct d40_log_lli *lli_sg,
dma_addr_t addr,
int size,
u32 lcsp13, /* src or dst*/
u32 data_width1, u32 data_width2,
bool addr_inc);
int d40_log_sg_to_dev(struct scatterlist *sg,
int sg_len,
struct d40_log_lli_bidir *lli,
struct d40_def_lcsp *lcsp,
u32 src_data_width,
u32 dst_data_width,
enum dma_data_direction direction,
dma_addr_t dev_addr);
int d40_log_sg_to_lli(struct scatterlist *sg,
int sg_len,
struct d40_log_lli *lli_sg,
u32 lcsp13, /* src or dst*/
u32 data_width1, u32 data_width2);
void d40_log_lli_lcpa_write(struct d40_log_lli_full *lcpa,
struct d40_log_lli *lli_dst,
struct d40_log_lli *lli_src,
int next);
void d40_log_lli_lcla_write(struct d40_log_lli *lcla,
struct d40_log_lli *lli_dst,
struct d40_log_lli *lli_src,
int next);
#endif /* STE_DMA40_LLI_H */